14 best bandsaw for woodworking

Product description

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• 2.5 amp motor rotates the blade up to 2500 feet per minute
• Create cuts up to 3-1/2 inches deep and 9 inches wide
• Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
• Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

User questions & answers

Question:	What are the table dimensions
Answer:	The table is 12" by 12".
Question:	Can this cut schedule 40 stainless steel 304L pipes
Answer:	I wouldn't, the cuts wouldn't be that great and you would burn out the motor on the saw
Question:	will saw make sharp turns
Answer:	If you install a smaller blade it will turn almost as sharply as a scroll saw. I have a 1/4" blade and it can turn perhaps a 3/4" radius OK.
Question:	Do i need to purchase saw blades
Answer:	The saw ships with one wood blade. I purchased an extra finer tooth blade and a metal cutting blade. good to have an extra in case the one you are using breaks.

Product description

"Remember when power tools were actually powerful? Reminiscent of your Grandpa’s bandsaw, the WEN 10-Inch Two-Speed Band Saw is the perfect companion for any workshop. With a 3.5-amp motor and a 9-3/4 inch throat, this beast will attack boards with cuts up to six inches deep and 9-3/4 inches wide. Two-speed operation allows for speeds of either 1520 or 2620 FPM. The design of this saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4, 2-3/4, 4 inches), a fence for creating straight cuts, a miter gauge for angled cuts, and a stand. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the bandsaw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10-Inch Two-Speed Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN."

• 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
• Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
• Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
• Operates at two speeds of either 1520 or 2620 FPM
• Optional stand allows for either floor standing or bench top applications
• Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

User questions & answers

Question:	When centering the blade on the tires, should the blade or the gullets be centered
Answer:	According to Alex Snodgrass the band saw guru with Carter power tools, the gullet of the blade is what should be centered on the tire.
Question:	Do I have to buy the 72 inch blades, or is there some room for a 72 7/16 blade to fit it
Answer:	I don’t have a different answer, but I feel bad for the person that has 21 downvotes, because they’re not wrong. This saw is available in 3 sizes. 72 is for the 10”, 62 is for the 9”. Sorry, ccbdav. Don’t let em get you down.
Question:	Has anyone used this tool to cut thru 4 inch oak? For example table legs
Answer:	The blade that came with it is actually not bad at all as I cut a 5 inch diameter oak log from a chopped tree in my back yard down to a 3"x 3" x 2' piece of usable lumber. I was impressed. I later bought a bi-metal 1/2" 14TPI blade and installed it for metal cutting. It did cut with no effort a 1" thick T6 aluminum. I am not sure if if can do thicker as I did not try it. I also cut 1/2 mild steel bar with no problem at all. No binding or stalling. All the cuts of wood or metal were straight. You just have to let the blade do the work and not force feed it through
Question:	Where is it manufactured
Answer:	There's a tiny island off the north west coast of Mauritius called Gelff. Not even on most maps. Discovered by captain James Cook in 1752. In 1754 Gelff, represented by James Cook in Spanish courts, was granted sole manufacturer of the WEN 3962 Two-Speed benchtop bandsaw. Raw materials are brought in on one side of the island. Some kind of assembly/manufacturing factory must be inland somewhere, they don't allow access to the interior. The fact that this is such a fine product becomes obvious when one visits the far side of Gelff, where cargo ships are waiting to load and deliver this product around the world.

Product features

WEN Two-Speed 10-Inch Bandsaw with Stand

Remember when power tools were actually powerful? With a 3.5-amp motor and a 9-3/4 inch throat, the WEN 10-Inch Two-Speed Band Saw will glide through boards with cuts up to six inches deep. This saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45°. Two-speed operation allows for speeds of either 1520 or 2620 FPM. Ball-bearings give the 10-inch wheels smooth operation and a long life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop's work bench.

3-in-1 Dust Port

The WEN Band Saw includes a 3-in-1 Dust Port to fit a variety of dust collection hose sizes (1-3/4, 2-3/4, 4 inches).

Two-Speed Operation

Run the blade at either 1520 or 2620 feet per minute to meet the needs of any given project.

Variety of Blade Options

Use 72-inch blades anywhere from 1/8 to 1/2 of an inch in size depending on the intricacies needed.

Bevel Cuts from 0° to 45°

Create angled cuts up to six inches in depth by beveling the 14-1/8 x 12-1/2-inch table up to 45° to the right.

Equipped with a full 6 inches of resaw capacity

Remember when you could cut wood up to 6 inches thick in a single pass? The WEN 10-Inch Two-Speed Band Saw provides you the capacity to attack boards up to six inches thick. Combine this with the 9-3/4-inch throat for a machine that can take on more wood than other 10-inch band saws.

Packed with additional accessories

The WEN Band Saw includes a flexible worklight to illuminate your work piece, a sturdy fence for creating straight cuts, a miter gauge to cut along specific angles, a 3-in-1 dust port to meet the needs of a variety of dust collection hoses, and a 25-inch stand to keep the band saw elevated.

Product description

The Rikon Deluxe 10-3061 Bandsaw is just what you need in a benchtop bandsaw. The powerful 1/2HP motor with a cutting capacity of 5” high and 9-5/8” wide means you can cut nearly anything. Two different blade speeds let you speed up or slow down the blade based on the material size and density. The complete unit has a wide front guide rail with adjustable scale, sturdy cam-lock fence carrier with wide panel, and a 2-3/8” tall x 12-1/4” long aluminum fence extrusion. The 2-1/2” OD dust port fits most standard shop vac hoses making it easy to keep your work area clean. Specifications:  Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Length: 70-1/2”, Blade Width: 1/8” to 1/2” (Note: 1/8” blade requires aftermarket blade stabilizer), Blade Speeds: 1515 or 3280 ft/min, Cutting Capacity Height: 5”, Cutting Capacity Width: 9-5/8”, Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right, Miter Gauge Slot Size: 5/8” x 1/4”, Height to Base: 14-1/2”, Height to Floor (with optional open stand): 39-7/8”, Fence Size: 12-1/4” x 2-3/8”, Dust Port Size: 2-1/2” OD, 2-1/4” ID, Base Size: 15-7/8” W x 9-3/8” D, Overall Size: 34-1/4” H x 21” W x 16-1/4” D, Machine Weight: 77.5 lb., Shipping Weight: 86 lb. 

• HIGH QUALITY MACHINE – This product includes the 10-3061 Deluxe Bandsaw and 5/16” x 70-1/2” 6TPI bandsaw blade. Great for producing smooth cuts in wood, metal, and more, this machine is perfect for any craftsman's project. Toggle between two different blade speeds to cut nearly anything.
• MOTOR DETAILS - The increased cutting capacity and increased 1/2HP motor make this bandsaw great for small to medium sized projects. Motor: 1/2HP, 5.5Amp, 110V (60Hz), 1720RPM, Blade Speeds: 1515 or 3280 ft/min
• TABLE DETAILS - The tilting, 0-45° cast iron table makes for easy operation. Table Size: 13-3/4” x 12-1/2”, Table Tilt: 5 degrees left, 45 degrees right
• DIMENSIONS – Fence Size: 12-1/4” x 2-3/8”, Dust Port Size: 2-1/2” OD, 2-1/4” ID, Base Size: 15-7/8” W x 9-3/8” D, Overall Size: 34-1/4” H x 21” W x 16-1/4” D
• FEATURES – Features tool-less blade guides; quick-release blade tension lever; large blade tracking knob and viewing window; dust port for shop vacuum hookup; and a safety paddle on/off switch. Comes with 5/16" x 6TPI regular blade and a 5-year limited warranty. RIKON Power Tools is dedicated to designing and manufacturing woodworking machinery of the highest quality that enhances the woodworking experience.

User questions & answers

Question:	Any problems resawing 8-foot 2x4’s into 1x4’s
Answer:	Mine stop working the fifth time using it. Resawing a small piece of oak, the motor just gave up. Also i was unable to create an account with them because PR is not in the states/country list, so i was unable to get a warranty. Wasted my money, buy a good bandsaw don't waste your money.
Question:	Can I put a riser block on this saw
Answer:	Unfortunately you cannot add a riser block. This bandsaw has a relatively small resaw capacity, so if this is a feature that’s important to you, I might stick with another one.
Question:	diamensions of saw
Answer:	Thank you for your question about the RIKON 10-3061 Improved 10" Deluxe Bandsaw 1/2 HP, 2 speed, Tool-Less Guides. The dimensions of the saw are: Overall Height: 34-1/4in. Overall Width: 21in. Overall Depth: 16-1/4in. Base Size: 15-7/8in. x 9-3/8in. Dust Port: 2-1/2in. O.D., 2-1/4in. I.D. Net Weight: 77.5 lbs. Amps: 5.5 Volts: 110V, 60Hz Please let us know if you have any other questions or concerns. Thank you again, and have a wonderful day!
Question:	What are the dimensions of the column itself? (Width x depth; height not needed, for mounting aux. miter gauge, etc
Answer:	The width including mounted miter gauge is 23 1/2” X 15” deep.

Product description

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You'll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you're doing.

• Rip fence for straight, accurate cuts; 6 TPI band saw blade cuts through a variety of wood materials
• Articulating LED work light for better view of work piece and cut line
• Features a 1-1/2 inch dust port that keeps work area clear of dust
• Rack and pinion table adjustment for quick angle and height adjustments
• Motor is 1 speed for wood or metal based materials

User questions & answers

Question:	can I cut glass
Answer:	Not unless you can find a diamond/carbide blade - glass is usually cut by abrasion. That would be unlikely for a small saw of this type.
Question:	what are the dimensions of the base....LxW
Answer:	The black base is 14-1/4" long, by 8-1/2 wide, and 2" tall. This SKIL Bandsaw is a wonderful addition to my shop and works beautifully! I have had mine for over 2 years now! Enjoy!
Question:	What are the specs on the included sawblade (TPI and width)? How many saw blades does this come with
Answer:	The blade that's included is 6 TPI. This saw accepts 1/8" to 3/8" blade widths, 59 1/2" and 59 1/4" length blades.
Question:	Can this saw be bolted down to a table? To make less subject to "wobbling
Answer:	Depends on why it wobbles. If it wobbles because it sets on an uneven surface, then yes bolting works. If wobble is from an oblong wheel, out of balance wheel, or something else along thode lines; then no, bolting it down won't help.

Product features

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light

For cutting irregular shapes and ripping lumber into thinner pieces, novice woodworkers will find the new 3386 SKIL 9-inch Band Saw with Light is essential for their workshop. You’ll cut through a variety of wood materials with the 6-TPI blade. Make quick angle and height changes with the rack and pinion adjustable table. EZ View Blade Tracking lets you easily align the blade. Other features include a rip fence for straight cuts and a miter gauge for cross cuts. The dust port keeps your work area dust-free, while the LED work light adjusts so that you can see exactly what you’re doing.

Includes

SKIL 3386-01 120-Volt 9-Inch Band Saw with Light, Blade, Miter Gauge, Rip Fence.

Articulating LED Work Light

The articulating LED Work Light illuminates cut line and ensures proper visibility.

Rack and Pinion Table Adjustment

To quickly make the right angle and height changes, a convenient rack and pinion table adjustment is found on the band saw.

Rip Fence and Miter Gauge

The adjustable rip fence helps guide the work piece for straight and accurate cuts, while the miter gauge comes in handy when making crosscuts.

Dust Port

To minimize dust and debris in the work space, a dust port is available to attach a vacuum hose.

Product description

The Rikon 10-Inch Bandsaw Model 10-305 offers all of the same quality features found in larger bandsaws. Includes 1/3HP motor, cast iron table and 4-5/8-Inch re-saw capacity. The 10-305 also includes a fence and micro adjustable guide post height. A 2-1/2-Inch dust port keeps your work area clear of dust.

• Solid Steel Design- The 10-305 is a scaled down version of the popular 10-345 and 10-325. Frame is made of steel plate, stronger than plastic frames used by other manufactures
• Cast Iron Table-Large 13-3/4-Inch by 12-1/2-Inch sturdy work surface, a feature not typically found on a bandsaw of this size
• Rip Fence- A quality rip fence is now included. Easily removed to do free hand work
• Motor - 1/3HP motor provides ample power for cutting bowl and pen blanks
• Micro Adjustable Guide Post- Raise and lower the guide post height with the turn of a handle

User questions & answers

Question:	What's the maximum cutting height capacity? (i need at least
Answer:	Our band saw can do that, the only thing you need to do is buying a band saw stand .
Question:	did not get ban saw or money back
Answer:	Yes it is 110 volt
Question:	Can it cut through a 4" round stock of aluminum
Answer:	No
Question:	I nee to cut a curve on some 4" thick oak braces, could this saw handle the task
Answer:	NO

Product features

Model 10-305: 10″ Bandsaw

10” Bandsaw #10-305 is a favorite of woodworkers and hobbyists that do not require large cutting capacity and power for their projects, or have limited shop space for a larger size bandsaw. Includes features for easy operation – tilting 0-45° table, rip fence, large blade tension knob, dust port for shop vacuum hookup, and safety paddle on/off switch. Reduced size is ideal for transporting, or storing, when not in use. Includes rip fence. Steel stand (#13-913) and a miter gauge are available separately.

• 4-5/8″ Re-Saw Capacity
• Edge Facing Thrust Bearings
• Large Cast Iron Table
• Safety Paddle Switch
• Includes 2″ Tall Fence
• 2-1/2″ (O.D.) Dust Port

Product description

General’s 14” wood cutting band saw is ideal for any shop. It’s designed for hard or soft woods. Featuring a tilting table for angles up to 45 degrees. This woodworking band saw is on a sturdy stand with balanced wheels that can handle a variety of woodworking bandsaw needs.

• ACCURACY & PRECISION - Precision upper & lower ball bearing blade guides, provide blade stability improving cut accuracy.
• EFFICIENT CUTTING - 1 HP TEFC (Totally enclosed fan cooled) motor easily handles various bandsaw cutting needs.
• MULTIPLE CUTTING SPEEDS - Two cutting speeds (1575 & 3280 SFM), for excellent results in either hard or soft woods
• UNIQUE DESIGN - Tilting table allows table to be tilted out to 45 degrees, right, or any angle between 0-45 degrees. One-piece welded frame design reduces bandsaw vibration.
• PRODUCT SPECS - Wheel size: 14", Wheel speeds : 436 & 909 rpm, Blade speeds : 1575 & 3280 lin. Fpm, Blade width: 1/8"-3/4", Blade Length: 100-3/4",

User questions & answers

Question:	How thick of material can it saw
Answer:	No, a case is not available.
Question:	What is the resaw capacity
Answer:	The part number for the rip fence is 858274.
Question:	How well does it cut hard woods
Answer:	Stroke Length = 3/4 in
Question:	can you tell me the resaw cap. of this bandsaw
Answer:	No, the BLACK+DECKER and CRAFTSMAN products are not compatible.

Product description

Remember when power tools were actually powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-5/8 inches deep and 9 inches wide. The 2.8-amp motor rotates the blade at up to 2460 feet per minute. The design of this saw uses 62-inch blades anywhere from 1/8 to 3/8 inches in width for both intricate yet powerful cuts. The spacious work table measures in at 12 x 12 inches in size and can be swiveled up to 45 degrees. This package includes a handy carrying handle, an onboard dust port, a fence for creating straight cuts, a miter gauge, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN.

• 2.8 amp motor rotates the blade up to 2460 feet per minute
• Create cuts up to 3-5/8 inches deep and 9 inches wide
• Uses 62-inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12 x 12 inch work table bevels up to 45 degrees
• Includes a 2-year warranty, a dust port, a fence, and a miter gauge

User questions & answers

Question:	The description says "2460 fpm"; the comments say "reduce speed to cut metal" -So is it adjustable-speed, or single-speed, or two-speed, or what
Answer:	It shows on the back of my package that it will fit the .6l insulated bottle.
Question:	Many of the reviews say the unit uses a 72" blade yet the prodcut description states 62". Can anyone confirm if it is 62" or
Answer:	I don't know. I don't have the 1L. I have the .75L.
Question:	Dose this have a work light
Answer:	As long as you are using it for what it’s designed for. Yes, it works, on camelbak systems. Just like it’s designed to.
Question:	The fence is sloppy; would the powertec bs900rf rip fence be any better? or are there others that are more precise? good saw otherwise
Answer:	I have never seen them in blue.

• Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, prewired 110V
• Amps: 11A at 110V, 5.5A at 220V
• Table size: 14" x 14" x 1-1/2"
• Table tilt: 45 deg. right, 10 deg. left
• Floor to table height: 43"

User questions & answers

Question:	Product description says this saw has wheels. Another question about using a mobile base....does the stand have wheels or not
Answer:	It does not come with wheels. You have to either add 4 wheels or purchase a mobile base. The trick about adding 4 wheels is that it is difficult to find wheels that can support the weight, but that don't raise the height too much.
Question:	is it made in china
Answer:	This machine is manufactured in Taiwan.
Question:	what base would be compatible with this saw so I could roll it out of the way when not in use
Answer:	We recommend Shop Fox's D2057 Heavy Duty- Mobile base.
Question:	what is the packing/shipping size of this item
Answer:	Not sure about the exact size but it’s delivered in a pallet. Very heavy

Product features

Great bandsaw!

The G0555LX 14" Deluxe Bandsaw has many of the same great specifications and features as our extremely popular G0555. However, this great bandsaw also includes computer-balanced cast-iron wheels, rack-and-pinion guide post adjustment for the upper blade guides, and a sturdy T-shaped fence design.

Ball Bearing Blade Guides

Precision Cast-Iron Table

Cast-Iron Frame

Cast-Iron Wheels with Urethane Tires

Specification

• Motor: 1 HP, 110V/220V, single-phase, TEFC, 1725 RPM, prewired 110V

• Amps: 11A at 110V, 5.5A at 220V

• Table size: 14" x 14" x 1-1/2"

• Table tilt: 45 deg. right, 10 deg. left

• Floor to table height: 43"

• Cutting capacity/throat: 13-1/2"

• Maximum cutting height: 6"Blade size: 92-1/2" - 93-1/2" (1/8" to 3/4" wide)

• Blade speed: 1800, 3100 FPM

Features

Cast Iron Wheels

Quick Blade Tension Release

Lockable Switch with Padlock

Rack-And-Pinion Guide Post

Sturdy T-Shape Fence Design

Ball Bearing Blade Guides and Thrust Bearings

Heavy Gauge Steel Stand

Product description

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.



WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• Product 1: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Product 1: Belt tilts anywhere from 0 to 90 degrees
• Product 1: Sturdy cast iron base prevents any heavy vibrations
• Product 1: 4.3 Amp motor provides up to 3600 RPM
• Product 2: 2.5 amp motor rotates the blade up to 2500 feet per minute
• Product 2: Create cuts up to 3-1/2 inches deep and 9 inches wide
• Product 2: Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Product 2: Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees

Product description

Designed to perform, the JET 18” bandsaw delivers more re-saw capacity, greater throat depth, and the horsepower you need to tackle bigger boards, create smoother edges, and master the intricate cuts. The heavy-duty cast-iron fence system is built to give you the sturdiness and support you need for every project, and features a micro-adjust dial for exact placement. The table is slotted and the guide post has a stress-free magnetic door on the front for efficient blade changes. Large, independently-adjustable guides are tool-less to save you time on set up. The JET 18” steel frame bandsaw is engineered to build great projects through superior performance.

• 16" RESAW CAPACITY: Handles both large and small projects.
• 27-1/4" x 20" CAST IRON TABLE: Added stability and work support.
• 4-SIDED GUIDE POST WITH RACK AND PINION ADJUSTMENT: Optimum blade support.
• HEAVY-DUTY TENSIONING WITH 3 SETTINGS: Full tension, partial tension, and full release.
• BLADE TRACKING WINDOW: Provides clear view of blade during tracking.

User questions & answers

Question:	What's the blade replacement part number for this in
Answer:	It is extremely long, too long for my preference (actually). I run it in a SOG ninja and have a lot of length left after my shoulder strap is strung.
Question:	Does this come with the saw blade
Answer:	100 oz = 2834 gram. Quite heavy.
Question:	What is the motor phase
Answer:	Yeah, I think it should fit the .75l! I got this for my 1L Camelback Eddy. The straw was a little long so I cut it to fit. Works great!
Question:	does this ship ready to be plugged in
Answer:	Yes, go to the Camelbak website and fill out a warranty claim for a new cap. They have a checkbox for broken hinge. They'll send a new one right out. (I've already had to replace 2.)

• Motor: 3 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz, pre-wired 220V
• Overall size: 78"H x 36"W x 32"D
• Wheels: fully balanced cast iron with polyurethane tires Wheel covers: pre-formed, hinged steel

User questions & answers

Question:	Why is this $66 more than on Grizzly.com
Answer:	Just squeeze the bladder and hold the bite valve open and water will flow out. Just make sure the hydro lock is open the same as is needed to drink from it.

Product features

Extreme Series 19" Wood Bandsaw!

We’ve taken our ever popular and highly regarded G0514 and made another Extreme Machine. Cast-iron wheels, double-row ball-bearing blade guides, and a 3 HP motor help make this a wood devouring saw. Also, the extra large tilting table and Grizzly patent-pending Re-saw Fence make controlling the cut easy. You’ll really appreciate the extra features like two 4" dust ports, a tracking window, quick-release blade tension device, and blade tension scale. Both blade guide height and blade tension are handwheel controlled, and the wheel covers are hinged for convenience.

Fully Balanced Cast-Iron Wheels with Urethane Tires

Micro-Adjusting Gear Table

Double Ball Bearing Blade Guides

Cast-Iron Fence with Extruded-Aluminum Resaw Fence

Specifications:

• Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, 60 Hz, 1725 RPM, pre-wired to 220V
• Motor: 3 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz, 12A, 1725 RPM
• Table size: 26-3/4" x 19" x 1-1/2" thick
• Cutting capacity/throat: 18-1/4"
• Maximum cutting height: 12"
• Blade size: 143" long
• Blade sizes available: 1/8" – 1-1/4"
• 2 Blade speeds: 1700, 3500 FPM

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

Product description

JET HVBS-712D 7"x12" Deluxe Horizontal/Vertical Bandsaw (414560)

• HORIZONTAL OR VERTICAL POSTIONS: Large 9" x 12" infeed table assembly extends the support area.
• REPEATABILITY: Micro-adjustable tool-less material stop for accurate set-up.
• DURABILITY: Blade wheels are made from flanged cast iron.
• LONGER BLADE LIFE: Base contains a coolant system that helps to increase cutting efficiency and blade life.
• CSA/CUS CERTIFIED: This saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	Does the free prime shipping include lift gate service
Answer:	Tengo un cargador
Question:	I am having issues locationg where it specifies what square and round diameter steel it will cut
Answer:	Yes, it does.
Question:	How much assembly is required for this bandsaw upon delivery
Answer:	This machine uses a grinding head with a diameter of 2.35mm. If your grinding head diameter meets this range, you can use it
Question:	will this cut 6"X6" square aluminum tubing
Answer:	All that is needed for this size reservoir to fit is an appropriate sized pack with a pocket in which to place it. I have found that many packs I have actually have pretty generous "pockets" dedicated to the reservoir itself and I can finagle an extra 100 oz bladder in alongside the first one with both filled to capacity. Yeah, it will be snug and you'll need to stow the extra tube/bite valve, etc., but on those really long hiking, hunting biking trips, having the extra water available that doesn't impinge on other storage areas is helpful. Obviously, if you are using a minimalist pack for, say, running, they don't have the extra room to accomplish what I suggest. But for those pack that do have the room, a spare reservoir filled with ice and water for those long, hot, dusty, treks will be more than appreciated when you are between water stations.

Product features

JET HVBS-712d, 7" X 12" Deluxe Horizontal / Vertical Bandsaw

The JET HVBS-712D Deluxe Horizontal/Vertical Metalworking Bandsaw has everything any operator needs to tackle even the toughest job. Increased the width and height of the stand and added new features that exceed expectations. The HVBS-712D is another innovative JET product packed with features you’ve come to expect.

Features:

Large 10" x 12" infeed table assembly extends the support area and can be used in either horizontal or vertical positions.

Multi-position blade guides enhance use in vertical position by increasing the throat capacity from 4" to 8" and creates a safer working position.

Tool-less quick lock vise with preset mitering positions at 15°, 30° & 45°.

Improved Height and width of stand with built-in storage cabinet and chip tray.

Micro adjustable tool-less material stop for accurate set-up and repeatability.

Product description

The DEWALT DCS371M1 20V MAX lithium-ion band saw (bare tool) features a 2-1/2" cut capacity, and the ability to cut up to 2" SCH 40 pipe. The centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue. A LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting. This unit has an integrated hang hook which allows users to hang the saw without damaging the front handle or base. The special blade tracking adjustment increases blade life by providing better blade tracking, and the tool less blade changing lever loosens blade tension to allow for easy blade changes. The dual bearing blade guide rollers provide increased durability in the blade support system. This band saw also has an ergonomic soft grip back handle which provides the user with comfort and flexibility.



Common applications include: conduit up to 2" dia., 1-5/8" Unistrut, SCH 40 pipe up to 2", threaded rod, square and rectangular tubing, and angle iron.



Max capacity round: 2-1/2"

Max capacity square: 2-1/2"

Blade length: 32-7/8"

Cutting speed: 570 fmp



This kit includes:

DCS371 20V MAX band saw

14/18 TPI blade

blade tracking wrench

This is a bare-tool item; battery and charger sold separately.

• 2-1/2" cut capacity cuts up to 2" SCH 40 pipe
• Centered handle position provides superior balance and ergonomics
• LED Work Light with 20 second delay
• Blade tracking adjustment
• Dual bearing blade guide rollers
• Battery & Charger Sold Separately

User questions & answers

Question:	Will this saw work with a flexvolt battery
Answer:	Stand base is 16"W X 23" L X 21" H and cutting base is 15.5"W X 19"L
Question:	Can this saw be used to cut wood and animal bones
Answer:	Hello. The DELTA® 14" Steel Frame Band Saw, MODEL 28-400, is designed for various re-sawing, cross-cutting and ripping operations for material up to 6 " in height and 13-5/8 " in width. It features a 1HP, two-speed motor and can accommodate blades from 1/8 " to 3/4 " in width.
Question:	Yes i need a band saw blades that fit the # dcs371b band saw by dewalt
Answer:	1/8" to 3/4" wide blades can be used by 931/2" long, maybe this will help!
Question:	Dont need a battery can you just buy a storage box
Answer:	The power cord is attached to the saw, it’s just not in the picture.

Product features

DEWALT DCS371B 20V MAX* Li-Ion Band Saw

DCS371B 20V MAX* Li-Ion Band Saw (Tool Only) has superior balance and ergonomics and can cut up to up to 2" SCH 40 pipe. Designed with hook and blade tracking adjustment to increase handle, base, and blade life. LED worklight allows users to work in dark spaces.

* For more info, please check our website

Features: