12 best roofing air nailers

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

High speed valve technology drives over 10 nails per second. High lifetime engine seals and feed system for durability and long life. Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials. Ergonomic design is lighter (4.5 lbs.) than leading competitive Coil roofing mailers. Steel skid plates with rubber inserts protect the tool and help to stop it from sliding. Operating pressure: 70-120 PSI. Over mold grip. Fixed exhaust.

• High speed valve technology drives over 10 nails per second
• High lifetime engine seals and feed system for durability and long life
• Easy to use

User questions & answers

Question:	Does this nail gun come with a plastic carrying/ storage case
Answer:	Tool only no case
Question:	Is this a new nail gun
Answer:	LOL
Question:	Cual es el mínimo y el maximo de las puntillas que lleva
Answer:	Solo lleva un rollo de clavos para madera por lo regular son de un solo tamaño en rollo...Pero en lo grande entra la medida hasta 1 pulgada 3\4 para esa clavadora y mas chicos
Question:	Can u use this nailer to install a fence
Answer:	No!This gun is recommended for roofing installation. You should try a siding/fencing gun like the Hutachi nv65ah2 or something similar. I actually purchased the freeman version for around $160 and it works pretty good.

Product description

Remember when you could re-roof your roof? Nail shingles, insulation boards, waterproof tar paper, fiber cement roofing, siding, vinyl and more with the WEN Pneumatic Coil Roofing Nailer. The versatile magazine holds up to 120 nails at a time, allowing for sizes of 11-gauge (.12 inches) nails ranging from 3/4 of an inch all the way up to 1-3/4 of an inch. Adjust the depth of the fired nails by turning the depth-setting wheel found on the head of the nailer. Clear jammed nails with the quick-release compartment on the side of the magazine. The adjustable shingle guide easily slides up and down the bottom of the magazine to help with quick and easy spacing for shingles of any size. This powerful nailer provides up to 430-inch-pounds of force at a 100 PSI operating pressure, making sure your siding stays in place. The rubber grip handle helps limit fatigue and maximize comfort during long jobs while the turnable exhaust valve on top of the nailer lets users aim the direction of the output air. With a 1/4-inch NPT air inlet, drive fasteners using pneumatic pressure anywhere from 70 to 120 PSI. This package also includes a bottle of oil, three assorted hex wrenches and a convenient blow-mold carrying case for easily transporting your nailer. And, because its a WEN product, your coil roofing nailer comes backed by a one-year warranty and a friendly customer phone line all to make sure you remember WEN.

• Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inch
• Adjustable shingle guide and depth control makes for easy shingle spacing during jobs
• Holds up to 120 nails at a time with a quick release for easily fixing jams
• Uses pneumatic operating pressure anywhere from 70 to 120 PSI
• Includes a blow mold carrying case, oil, and hex wrenches

User questions & answers

Question:	Can this gun be used for siding
Answer:	It will shoot 1 3/4 na ils and they will hold hardi plank siding well
Question:	Can this gun be used for vinyl siding. The nail head has to fall short of full contact with the vinyl
Answer:	Yes. Just turn down the psi on your air compressor outlet till the depth is right. When you hit a stud then tap that nail with a hammer. Or get the crapy vinyl adaptor for the front that sets the depth for you. Bostich makes one.
Question:	what is the weight of this nail gun
Answer:	This gun is F ing HEAVY a little over 11 pounds compared to most other coil nailer that weigh 5 to 7 pounds
Question:	Does this gun take roofing nails made for 15 degree guns
Answer:	Yes, I nailed about 4 square this past summer with 15 degree nails. No problems at all.

Product description

The BOSTITCH BRN175A bulldog 15 degree Coil roofing nailer combines performance and adjustability to handle roofing applications. This light weight 4.8Lb roofing nailer drives 3/4" to 1-3/4" Coil roofing nails. It has two firing modes, single sequential and contact mode, which can be selected using the dial above the trigger. There is a wheel to adjust the drive depth so that nails can be properly installed into a variety of materials. The exhaust cap can swivel so that the exhaust is always pointing away from the user, and the shingle guide under the magazine can be adjusted for proper shingle spacing.

• Upgraded engine and feed system improves drive quality, overall performance, and durability
• Dual door MAGAZINE can be closed multiple ways
• Oversized tool free depth adjustment for proper nail setting
• Carbide nose inserts help to protect the nose from wear
• Redesigned grip handle for better feel

User questions & answers

Question:	Does this nailer require a compressor
Answer:	Yes, this is pneumatic powered.
Question:	Where is made
Answer:	The country of origin of the BRN175A is Taiwan.
Question:	Does this also shoot siding coil nails
Answer:	It absolutely will NOT. I thought maybe it would from reading other reviews. It will just jam up every time

Product description

The DEWALT DW45RNR (Certified Refurbished) Coil Roofing Nailer is ideal for asphalt shingle roofing applications. This nailer increases your roofing productivity by allowing you to shoot 120 nails before reloading for maximum efficiency. Coil collated nails are compact and easy to load. Its ergonomic design is lightweight for easy handling.

• High speed valve technology drives at a rate of up to 10 nails per second
• Ergonomic design is lighter than leading competitive coil roofing nailers.
• Robust engine and feed system for durability and long life.
• Steel skid plates with rubber inserts protect the tool and help to stop it from sliding.
• Depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials.

User questions & answers

Question:	dose it have charger
Answer:	No
Question:	What size compressor is recommended for this device. what psi is needed
Answer:	1 horse power and up and for psi you will need between 9.5-11.5 psi
Question:	How many nails per second
Answer:	They quote up to 10 nails per second, so basically it will keep up with you unless you have superhuman capabilities. I know from experience it shoots faster than I can nail.

Product description

The NV45AB2 1-3/4-Inch Roofing Nailer is used for various construction work such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine. When only the best will do for roofing applications, choose the roofing nailer that has been sought after by professionals for decades.

• APPLICATIONS: Ideal for installation of asphalt roofing shingles and insulation boards
• EASY FASTENER INSTALLATION: Side loading magazine, convenient and easy for quick replenishment
• LIGHTWEIGHT: At only 5.5 Lb., the NV45AB2 is lightweight and well balanced for easy maneuverability
• SPEED: Quick driving system, for maximum efficiency
• DEPTH ADJUSTMENT: Tool-less depth of drive adjustment, for precision nailing/flush driving
• RUBBER PADS: Help keep nailer from sliding off roof when not in use
• CARBIDE TIPPED PUSH LEVER: Reduces wear
• DURABLE: Pneumatic power feed and return, allows tool to operate in the harshest conditions

User questions & answers

Question:	Recommended air pressure
Answer:	Hello, Thank you for your interest in the Metabo HPT Roofing Nailer. The recommended air pressure is between 70 and 120 PSI. Thank you again and have a great day!
Question:	Can I used .092” nails or do I have to use .12” nails
Answer:	Hi there! This tool only accepts nails that are .120" in diameter. Hope this helps!
Question:	Does it come with the carrying case
Answer:	No it does not
Question:	Diámetro medida de la manguera
Answer:	Muy bueno la pistola gracias

Product features

Side Loading Magazine

Convenient and easy for quick replenishment

Long-lasting Rubber Grip

For added comfort

Carbide Tipped Push Lever

Reduces wear

5.5 lbs, Lightweight and Well Balanced

For easy maneuverability

• Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails;
• Adjustable shingle guide for quick shingle spacing;
• Integrated side skid pads prevent the tool from sliding off roof when placed on its side;
• High-capacity magazine holds up to 120 coil nails at a time; Tool free adjustable depth of drive for consistent and controllable nail fit; 360° tool-free air exhaust.
• Interchangeable trigger for single shot or bumper fire function.

User questions & answers

Question:	Does this work with hitachi hot dipped galvanized 16 degree nail coils
Answer:	We used the hitachi nails with ours.
Question:	how big of a compressor do you need
Answer:	A small pancake compressor will work you only need 90 psi
Question:	What comes with the gun
Answer:	safety glasses, hex wrenches, oil bottle, manual
Question:	can you rapid fire with it
Answer:	Idk if u could mess with it to make it rapid shoot, but as It comes u have to hit the trigger everytime u shoot the gun

Product features

Product description

The HBT HBCN45P is designed for use with 15 degree, 7/8'' To 1-3/4'' Wire Collated roofing nails, it is an ideal tool for roofing, siding installation and wooden box assembly. This air nailer can drive roofing nails fast and hard while its lightweight design prevents user fatigue. The nail gun features an adjustable shingle guide for accurate shingle spacing and steel contact safety with dual carbide inserts for less wear. The selectable trigger makes for easy change between sequential and contact mode. It also features a tool-less adjustable depth control and 360 degree exhaust. This professional-grade tool is perfect for construction workers, roofers and anyone looking for long-lasting performance. Operation pressure: 70-120PSI, magazine capacity: 120pcs.

• Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''
• Selective actuation switch allows for either sequential or contact mode
• Tool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacing
• Durable and lightweight magnesium housing helps reduce user fatigue
• Skid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tear

User questions & answers

Question:	Could anyone tell me the specific brand of 1 inch nail that would be compatible
Answer:	The tool was returned because we couldn't find any nail size or brand that would work consistently.
Question:	Does it bump nail/rapid fire
Answer:	It absolutely bump fires/ rapid fire
Question:	Is the npt 1/4 inch and does it shoot wire coulated 1 3)4 roof nails off home Depot shelf
Answer:	Yes it is 1/4" npt. It should shoot any of the 1 3/4 coil roofing nails. I have always used the fast grip brand and have never had an issue.
Question:	Can I use a Bostitch nails it should have quarter 15 degree smooth shank
Answer:	No, that will cause nail gut to jam

Product description

The CCN45 is one of the most versatile roofing nailers in the industry. The CCN45 can be used for roofing, insulation board, vapor barrier installation, vinyl siding, and fiber cement board. This very durable yet lightweight tool is great for the professional or for do it your selfer. Contact firing mode will help to make Quick work of any project. Single Action Side loading magazine makes it a snap to load and keep going.

• The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length.
• Contact firing mode for convenience and speed enabling smooth uninterrupted operation.
• Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue.
• Durable and lightweight heat-treated aluminum housing for years of solid performance.
• Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly.
• 7 year warranty

User questions & answers

Question:	Where can i get the o-rings snd other replacement parts
Answer:	Hi there! This is in a fixed position once attached, but can be slightly adjusted before attaching. Hope this helps!
Question:	What nails diameter fit
Answer:	Hi there! This rafter hook does not fit the Metabo HPT NV45AB2 roofing nailer. Hope this helps!

Product description

Palm Air Nailer

User questions & answers

Question:	What size nails and does it shoot roofing nails
Answer:	No magazine. Just a single shot with a magnet to hold the nail.
Question:	Is there any way to adjust depth? Like backing out the black collar...though the parts diagram doesn't show threads so I can't tell if it unscrews
Answer:	I use it for shingles for tight spots where I can't get my nail gun and a single nail at a time
Question:	does it have a magazine for the nails
Answer:	absolutely
Question:	Can it do shingles and how much size nails can be loaded in this gun
Answer:	I don't exactly understand your question, but I will give it a shot. Yes, you fill the yellow bag with sand, you then sink the loaded yellow bag in the water. attach your inflatable to the handle. sit back enjoy while you float around and not drift away. I personally use mine in the ocean and I never get taken out to sea.......

Product description

Air Locker RN45AB2 11 Gauge 3/4 to 1-3/4" Coil Roofing Nailer

• Air Locker RN45AB2

Product description

The NV45AB2's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18 wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1 3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine.

Lightweight and durable, the Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer stands up to the elements and provides consistently accurate results over the life of the tool. An ideal tool for a variety of construction projects, including installation of asphalt roofing shingles and insulation boards, the NV45AB2 features a high-capacity side-load magazine, depth of drive, durable construction, and more.

All-Weather Nailer You Can Count On

The NV45AB2 has been rigorously tested in the most extreme roofing environments, so you can count on it--no matter what the forecast is. Thanks to a pneumatic-powered nail-feed mechanism that removes dirt and moisture from the nailer, you can be sure this tool will work in any weather.

High-Capacity Magazine and Quick-Driving Capabilities for Efficiency

The NV45AB2 features a side-loading magazine that accepts 120 7/8-inch to 1-3/4-inch-long coiled wire collation nails with 0.120-inch diameters. The air inlet is 3/8 inch, and the ideal operating air pressure is 70-120 psi.

The NV45AB2 has a quick-driving feature that provides maximum efficiency when nailing large areas by allowing the nailer to shoot each time the nose touches the work surface. The large carbide inserts on the nose provide durability and performance during operation.

Designed for Maneuverability

The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is lightweight at just 5.5 pounds, so it's easy to maneuver while working on a rooftop. Its well-balanced design ensures easy one-handed operation, and the long-lasting non-slip rubber-grip keeps you comfortable and in control. Rubber on the nailer's side allows you to place the tool on a roof without worrying about it sliding off.

The Hitachi NV45AB2 Roofing Nailer measures 9-27/32 x 4-5/8 x 10-3/8 inches (LxWxH). It is backed by Hitachi's five-year limited warranty.

About Hitachi: A Tradition of Innovation

Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box

NV45AB2 1-3/4-Inch Coil Roofing Nailer, safety glasses, and shingle guide assembly.

From the Manufacturer

The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is the epitome of power and durability. Hitachi's pneumatic feed and return ensures consistent feeding even in the harshest conditions. The carbide tipped push lever prevents wear while the rubber pads (on the body of the tool) prevent it from slipping. With a rubber grip for comfort and tool-less depth of drive, the NV45AB2 is the whole package. The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer comes with a 5-year limited warranty. Hitachi Power Tools provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting and fastening. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

• Hitachi Power Tools has renamed to Metabo HPT; Same great tools, with only a new name

User questions & answers

Question:	how does this gun do for shooting 1 3/4" nails reroofing over shingles
Answer:	Very well. I was impressed with its performance for 1 1/4" as well as 1 3/4"! Don't forget to oil!
Question:	Made in
Answer:	the one's that I got was made in Taiwan. if you can find one's made in Japan, that will be great. but again. it may be just the luck of the draw.
Question:	Will this nailer do Hardie Siding
Answer:	Yes it will work well for that. Hardie siding can be installed with this as manufacturers installation only requires 1" penetration into the stud. If nailing into sheathing then longer nails won't matter. This nails up to 1 3/4".Please refer to pages 11 and 12 of their best practice guide where this model is specifically mentioned as recommended for Hardieplank. See the link below, page 11 and 12.http://www.jameshardie.com/pdf/best-practices/hz/hz5-best-practice-guide-us-intro-tools.pdfThanks,ADP
Question:	I just bought one of these and it will leak if the trigger is held down halfway. If you depress it all the way it stops. Is this normal
Answer:	has to be normal, i bought one of there AV50AP2 and it did it from when new, thought there was a problem but been like that for years, my NV45AB2 does it too.