14 best mk 14 diamond blades

Product description

MK Diamond 170604 MK-215GL-XL 14 by .090 by 1 inch is a glass cutting blade. Supreme grade metal bond blade for glass. The MK-215GL-XL has been engineered specifically for fine glass cutting where chipping is not acceptable. The combination of fine, evenly spaced diamonds and an improved bond allows the MK-215GL-XL to cut with no chipping and a remarkably smooth finish. This blade is excellent for providing straight, true and chip-free cuts in the following materials: Soda Lime Glass, Stained Glass, Art Glass, Ceramic Glass, Glass Assemblies, Quartz Glass, Float Glass, Fused Silica/Fused Quartz, Tempered Glass, Optics, Electronic Glass, Flat Glass, Technical Glass 1737F, Glass Tubing, B270/Crown Glass and Photonics.

• 14 by .090 by 1 inch
• Glass cutting blade
• Supreme grade metal bond blade for glass
• Engineered specifically for fine glass cutting where chipping is not acceptable
• Excellent for providing straight, true and chip-free cuts

Product description

MK Diamond 166070 MK-301 14 by .065 by 1 inch is a lapidary blade. MK-301 Gemking. Has been redesigned with a greater diamond concentration and a higher carbon content steel core for improved tension memory. The solid diamond sintered kerf provides better cutting performance and improved coolant flow. The MK-301 provides superior cutting performance for hard materials such as agate, petrified wood or jade.

From the Manufacturer

MK Diamond 166070 MK-301 Gemking Lapidary 14-Inch diameter by .065-Inch width by 1-Inch arbor is a wet cutting blade and has been redesigned with a greater diamond concentration for faster cutting. The carbon steel core provides for better tension memory and the solid diamond sintered kerf provides superior cutting performance and improved coolant flow. The MK-301 Gemking is engineered for excellent service when cutting hard materials such as agate, petrified wood and jade.

• 14 by .065 by 1 inch
• Lapidary blade
• MK-301 Gemking
• Redesigned with a greater diamond concentration and a higher carbon content steel core for improved tension memory
• Provides superior cutting performance for hard materials such as agate, petrified wood or jade
• Wet cutting for longer blade life and protection of valuable project materials
• Greater diamond concentration for faster cutting

User questions & answers

Question:	is it suitable for cutting ceramics
Answer:	You may get some chipping as the raised diamond sides could grab the glaze. I would find a blade that had smoother sides. This is an example of the blade type I am talking about. https://www.amazon.com/Diamond-Continuous-Super-Hi-Porcelain-Materials/dp/B077F5W75P/ref=sr_1_18?ie=UTF8&qid=1545520499&sr=8-18&keywords=porcelain+cutting+blade
Question:	What kind of cutting oil do I want to use with this for cutting jade
Answer:	I use rock cutting oil from Covington engineering,,,,good price
Question:	what size is the arbor shaft
Answer:	The 12" through 20" blades are designed for 1" arbors. The 5" through 10" blades are designed for 5/8" arbors.
Question:	Can Lapcraft Tool-cool be used with this blade
Answer:	No these blades are used with oils only. I use mineral oil right now. I have used all mag oil too. Water base cutting blades will say water coolants only. If you use water base coolants drain your system each time and wipe blade dry. I found out the hard way. They will rust. Hope I have helped. Andy

Product description

MK Diamond 156727 MK-303 14 by .070 by 1 inch - Continuous Rim is a lapidary blade. It is professional grade. The MK-303 Professional grade diamond blade has been designed for cutting rare and valuable materials when waste needs to be held to a minimum and speed of cut is essential. The MK-303 produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades. Designed for use with a water soluble coolant. Blades 16 inch and larger have segmented rims.

From the Manufacturer

MK Diamond MK303 14 inch diameter by .070 inch width by 1 inch arbor wet cutting lapidary diamond blade is specifically designed for cutting rare and valuable materials. The very thin width of the continuous rim blade is designed to hold waste to a minimum and the speed of cut is essential for protecting the valuable material from damage. The professional series diamond blades last longer and cut faster than ordinary notched rim or plated diamond blades. MK Diamond has a worldwide reputation for superior cutting speed, maximum performance and exceptional blade life.

• 14 by .070 by 1 inch - Continuous Rim
• Lapidary blade
• Professional grade diamond blade
• Designed for cutting rare and valuable materials
• Wet cutting lapidary blade specifically designed for cutting rare and valuable materials
• Very thin width of continuous rim blade designed to hold waste to a minimum
• Speed of cut is essential for protecting valuable material from damage

User questions & answers

Question:	do you have to use a dressing stick on it before first use
Answer:	While that is possible, it is not always necessary.
Question:	There was no place to request a 5/8 inch arbor
Answer:	When you order it if you send us a note we will put one in for you.
Question:	What is the size of the arbor it will fit, I have a 5/8 inch arbor
Answer:	It comes with a 1" hole that we can bush to a 5/8" hole or a 1/2" hole. Just let us know what you need.
Question:	One feedback says these are not continuous, but notched blades. What does that mean? Can the blades be used with crystalyte or need oil
Answer:	The blades are not notched. They are continuous. They can be used with water. Never dry. They will last a very long time when using oil. Oil can be as simple as mineral oil at your grocers or drug store. That oil can be filtered using brown grocery bags as the filter. It takes a few days but the oil comes out clean. The oil, when clean can last forever. Good luck.

Product description

MK Diamond 159618 AX-10 14 by .125 by 1 inch is a premium grade blade with a segmented rim. It is for cutting asphalt. Blade segments are laser welded to steel core. For wet or dry cutting.

From the Manufacturer

"14" Wet Cutting Diamond Blade for Asphalt

• 14 by .125 by 1 inch
• Premium grade with segmented rim
• For cutting asphalt
• Blade segments are laser welded to steel core
• For wet or dry cutting
• Upc is: 092333803960
• Model is: 159618

Product description

MK Diamond 158693 MK-225 14 by .080 by 1 inch is a continuous rim wet cutting blade. Premium grade tile blade. Premium grade thin-rim blades for porcelain and vitreous tile. The stiffening/cooling slots have been designed to guarantee straight cutting in dense porcelain materials.

From the Manufacturer

MK Diamond 158693 MK-225 14-Inch diameter by .080 width by 1-Inch arbor premium grade thin-rim wet cutting blades are engineered for cutting porcelain and vitreous tile. Thin kerf is designed to cut very hard porcelain tile without chipping expensive material. Heat relief slots prevent heat build-up, which keeps blade from warping, which provides for cool running for straight, precise cuts. As a bonus, this blade is also very good for cutting granite as well as ceramic tile.

• 14 by .080 by 1 inch
• Continuous rim wet cutting blade
• Premium grade tile blade
• Premium grade thin-rim blades for porcelain and vitreous tile
• Stiffening/cooling slots have been designed to guarantee straight cutting in dense porcelain materials
• Cuts porcelain, vitreous tile, granite and ceramic tile
• Thin rim design and cooling slots keep blade running cool and true for precision cuts in very hard materials
• 7 millimeter rim height for long diamond blade life

User questions & answers

Question:	What is the max RPM of the 14" blade
Answer:	Buy this by the Foot, Latex Rubber Tubing .. Change the quantity to whatever length you want, up to 25 feet!! Amber I.D 1/2" Wall 1/8" O.D 3/4"

Product description

MK-699D Premium Grade for Asphalt and Green Concrete Blade is a Premium grade blade used for cutting asphalt and green concrete. The MK-699D features full radius core protection every six segments with wedge segments that provide excellent undercut protection.

From the Manufacturer

MK Diamond 160932 MK699D Series 14 inch diameter by .125 inch width by 1 inch arbor dry cutting diamond blade for asphalt and green concrete have been manufactured with the latest technology and the highest quality diamonds and are engineered for superior cutting performance. Segmented blades have heat relief slots and a 10 millimeter rim height for long blade life.

• Premium grade
• For asphalt and green concrete
• .125" width
• .125" width
• 14" diameter
• Blade is designed for cutting of asphalt and green concrete
• MK699D series have been manufactured with the latest technology and the highest quality diamonds and are engineered for superior cutting performance

Product description

MK Diamond 157957 BX-10 14 by .110 by 1 inch is a dry cutting segmented rim blade. Premium grade blades for hard brick and is laser welded.

From the Manufacturer

14" Dry Cutting Diamond Blade for Brick

• 14 by .110 by 1 inch
• Dry cutting segmented rim blade
• For cutting hard brick
• Premium grade blades for hard brick and is laser welded.
• For wet or dry cutting
• 14" blade
• Use with MK BX-3 Brick Xtreme Masonry Saw

Product description

MK Diamond 163931 MK-304RCK 14 by .125 by 1 inch is a Tiger Tooth premium demolition blade. This blade has been engineered for use by fire fighters, police rescue teams, search and rescue teams, SWAT, and USAR and specifically designed to cut rapidly through a wide variety of materials. The applications include utilization as an emergency rescue blade and tactical entry tool as well as demolition. Provides a user with swift and efficient cutting of a diverse range of materials, such as aluminum, concrete, copper pipe, corrugated roofing, dry wall, masonry, plastic, polyethylene pipes, PVC, rebar, roof tile, stainless steel, steel, stucco, tile backer board, and wood. This wide range of materials means that this blade cuts items such as acrylic, chain link, hardened stainless shackles, Lexan, metal hinges, Nader bolts, padlocks, steel doors, and window bars. Using a new vacuum-brazed system, the Tiger Tooth premium demolition blade has diamond particles fused directly to its steel core. This creates an incredibly strong heat-resistant bond, the strongest bond available when cutting without water cooling. The blade can be used on hand-held grinders, circular saws, chop saws, and gas cutoff saws.

MK Diamond's MK-304RCK Tiger Tooth premium demolition blade was engineered for use by fire fighters, police rescue teams, search and rescue teams, SWAT, and USAR and specifically designed to cut rapidly through a wide variety of materials. The applications include utilization as an emergency rescue blade and tactical entry tool as well as demolition. The Tiger Tooth premium demolition blade is available in multiple sizes, including 4-inch, 4-1/2-inch, 7-inch, 12-inch, and 14-inch sizes.

MK-304RCK Tiger Tooth Premium Demolition Blade At a Glance: 14-inch diameter, .125 width Diamond particles fused to steel core Strong heat-resistant bond Provides swift and efficient cutting Available in a variety of sizes

The MK Diamond MK-304RCK Tiger Tooth premium demolition blade is ideal for rescue situations and demolition (view larger.)

Cut Without Worry

In a time-sensitive situation or emergency, MK Diamond’s MK-304RCK Tiger Tooth premium demolition blade provide a user with swift and efficient cutting of a diverse range of materials, such as aluminum, concrete, copper pipe, corrugated roofing, dry wall, masonry, plastic, polyethylene pipes, PVC, rebar, roof tile, stainless steel, steel, stucco, tile backer board, and wood. This wide range of materials means that this blade cuts items such as acrylic, chain link, hardened stainless shackles, Lexan, metal hinges, Nader bolts, padlocks, steel doors, and window bars.

Technologically Advanced Cutting Capabilities

Using a new vacuum-brazed system, the Tiger Tooth premium demolition blade has diamond particles fused directly to its steel core. This creates an incredibly strong heat-resistant bond, the strongest bond available when cutting without water cooling. The blade can be used on hand-held grinders, circular saws, chop saws, and gas cutoff saws.

Dimensions

This MK Diamond MK-304RCK Tiger Tooth premium demolition blade measures 14 inches in diameter and has a .125 width.

About MK Diamond

MK Diamond was started in San Francisco in 1868 by Joseph Musto, a fifth-generation Italian stone-cutter and tile-setter whose ancestors were renowned master craftsmen. He brought the skills of his forefathers to his new home in America and established the Musto Steam Marble Mill. The trademark of the business was its pledge to quality work and service--the Musto family always believed that good enough was never really good enough. It is in honor of this work ethic that MK Diamond continues its unrelenting pursuit of producing the highest quality products. By 1949, the newly named Musto-Keenan Company had gained a reputation for making superior diamond tools to cut marble and tile faster and more efficiently, and has today become established as a leader in providing precision power cutting tools and diamond blades. MK Diamond is committed to making products and services that are a benchmark for the rest of the industry.

What's in the Box

One 14-inch MK Diamond MK-304RCK Tiger Tooth premium demolition blade.

The MK Diamond MK-304RCK Tiger Tooth premium demolition blade has diamond particles fused directly to a steel core (click each to enlarge).

From the Manufacturer

MK Diamond 163931 MK-304RCK premium demolition 14-Inch diameter x .125 width x 1-Inch arbor multipurpose Tiger Tooth blades have been specifically designed to cut all types of materials. The "Tiger Tooth" vacuum braze technology adheres the diamond to the surface of the segment, ensuring 100-percent of the diamonds are being used. There are no bonding materials to wear away enabling the diamond to work at its peak performance in steel, ductile pipe, plastic, wood, concrete, masonry and other construction materials. For the fireman, this means being able to cut through a roof through all materials to quickly gain entrance without having to change blades. It is the perfect blade for demolition projects. For the plumber, this means being able to cut through asphalt or concrete to expose a pipe and then cut the plastic or iron pipe with the same Tiger Tooth blade.

• 14 by .125 by 1 inch
• Tiger tooth demolition blade
• Engineered for use by fire fighters, police rescue teams, search and rescue teams, SWAT, and USAR
• Applications include utilization as an emergency rescue blade and tactical entry tool as well as demolition
• Provides a user with swift and efficient cutting of a diverse range of materials, such as aluminum, concrete, copper pipe and more
• Multipurpose blade has been specifically designed to cut all types of materials
• Tiger tooth vacuum braze technology adheres the diamond to the surface of the segment ensuring 100-percent of the diamonds are being used

Product description

MK Diamond 135095 MK-500 14 by .250 by 1 inch is a wet cutting blade. Standard grade for cured concrete. Laser welded and segmented.

• 14 by .250 by 1 inch
• Wet cutting blade
• Standard grade for cured concrete
• Laser welded

Product description

MK Diamond 159629 MK-414PB 14 by .125 by 1 inch is a dry cutting brick and block blade. Supreme grade blade for hard brick. The MK-414PB (Penter Brick Blade) has been specifically engineered to cut hard/dense brick. The turbo segment design provides additional cooling and cutting performance. Laser welded.

From the Manufacturer

MK Diamond MK414PB 14 inch diameter by .125 inch width by 1 inch arbor dry cutting Penter brick blade is specifically engineered to cut hard/dense brick. The turbo segmented design provides additional cooling and cutting performance. The 10 millimeter high diamond segments provide for long blade life. This dry cutting blade can be used with circular saws, brick saws, block saws and gas saws.

• 14 by .125 by 1 inch
• Dry cutting brick and block blade
• Supreme grade penter brick blade
• Specifically engineered to cut hard/dense brick
• Turbo segment design provides additional cooling and cutting performance
• Blade is specifically engineered to cut hard dense brick
• Turbo segmented design provides additional cooling and cutting performance

Product description

MK Diamond 133967 MK-215 14 by .080 by 1 inch is a continuous rim wet cutting blade. Fast cutting tile blades for smooth, chip-free cutting on tile and other stone materials. Excellent on dense floor materials.

From the Manufacturer

MK Diamond 133967 MK-215 Supreme 14-Inch diameter by .080-Inch width has bronze bushing, which can be knocked out and make the arbor 1-Inch. The MK-215 is a wet cutting tile and marble diamond blade. It is supreme grade and also performs very well cutting materials such as vitreous tile, slate, limestone, granite, marble, bluestone, and hard quartz. Blade has 7 millimeter continuous rim height for chip-free cutting and performance. Excellent on dense floor materials.

• 14 by .080 by 1 inch
• Continuous rim wet cutting blade
• Fast cutting tile blades for smooth, chip-free cutting on tile and other stone materials
• Excellent on dense floor materials
• Diamond blade
• Cuts tile, marble, vitreous tile, slate limestone, granite, bluestone and hard quartz
• Supreme blade for chip free cutting
• 7 millimeter continuous rim for long blade cutting life

Product description

MK Diamond 137315Z MK-404D 14 by .125 by 20 millimeter is a dry cutting general purpose blade. Supreme grade high speed blade. This blade is for concrete and masonry materials. Segmented blade.

From the Manufacturer

Segmented rim diamond blade for dry cutting of masonry and concrete. Premium grade.

• 14 by .125 by 20 millimeter
• Dry cutting general purpose blade
• Supreme grade high speed blade
• For concrete and masonry materials
• Segmented blade
• Segmented rim diamond blade
• For dry cutting of masonry and concrete

Product description

MK Diamond 166711 GC-10 14 by .125 by Tri inch is a soft bond early entry blade for cutting wet concrete for the purpose of putting in control joints. Skid plate shield is included with every blade purchase.

• 14 by .125 by Tri inch
• Soft bond early entry blade
• Skid plate shield is included with every blade purchase
• For cutting concrete

Product description

The TPX-40 Supreme Grade Dry Cutting General Purpose Blades are a 7 in 1 multi-application diamond blade and are designed for maximum life and speed. A newly developed bond allows for cutting a wide variety of materials including asphalt, block, granite, brick, concrete, bluestone and pavers. The laser welded segment over the gullet design helps to reduce noise by as much as 10db while providing efficient removal of cutting debris. The additional core cutouts provide improved cooling during deep cutting, which helps keep the core from warping or losing tension. The tall segment heights provide 30% more cutting life.

• Supreme grade
• A newly developed bond allows for cutting a wide variety of materials including asphalt, block, granite, brick, concrete, bluestone and pavers
• 14 inch diameter
• .125 inch width