10 best gas heater for home

Product description

This Radiant 30,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution, even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat, warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 30,000 BTU Natural Gas heater to heat spaces up to 750 sqaure feet.
• Radiant heat burner. Use-Supplemental heat in cold rooms, Additions, Sun rooms, Cabins
• Automatic low oxygen shut-off system (ODS). CSA Certified
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
• Theromostat, legs and wall mounting hardware included. Fuel Consumption/Burn Rate (Gal/Hr) - 0.030 MCF

User questions & answers

Question:	Does it have a blower
Answer:	The blower is not included. You can purchase the blower separately.
Question:	Does it come with a warranty
Answer:	Yes..it should have the warranty information down in the description/information section where you are looking at this particular item.
Question:	How well does the thermostat work? Would like to leave this unit on in the garage and maintain a set temperature
Answer:	Thermostat works well. It's not a set temperature thermostat though. You pick a number or in between spot that feels comfortable and leave it. I never leave it on overnight though.
Question:	What are the pros and cons of infrared verses convection nat. gas heaters
Answer:	Infrared is much warmer to me. We ordered 3 heaters before we found this one. It is the BEST and worth every penny that we paid for it. It heats quickly and evenly. I will never own another brand of heater.

Product features

Radiant Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.

The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Natural Gas only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.

• Natural Gas Ready (Fuel conversion not permitted)
• Blue Flame Technology works by converting heat to warm the air the same way as a central heating system
• 10, 000-20, 000 BTU's/hr variable heat output for up to 700 sq. ft.
• Variable control knob offers the most customizable heat settings LOW - 10, 000 BTU MED - 15, 000 BTU HI - 20, 000 BTU
• No electricity required allows for reliable back-up heating incase of an emergency situation
• This model (BF20NMDG) has manual control and not thermostatically controlled. For thermostat control model please refer model - BFSS20NGT-2N

User questions & answers

Question:	Does this heater have a fan in it
Answer:	You need to buy the fan specifically made for this heater. It’s attached to the heater with its own electrical plug
Question:	This unit came with thermostat
Answer:	The fan works independent of the heater. There is a heat sensor that turns fan on. Just plug it in and thats it.
Question:	How does it ignite
Answer:	This wall heater requires a minimum tank of 100lb.
Question:	Can you add a thermostat to this unit
Answer:	I don’t know off hand but if you google the manual and can view it - all the info is in there

Product features

Blue Flame Technology

Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.

Improved Circulation

Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.

Floor Installation Option

Add on the optional base legs (sold separately) for floor installation.

Manual Control System

Choose your ideal temperature with the turn of a knob and three adjustable settings.

Product description

The Bluegrass Living ventless infra-red radiant gas wall space heater operates on Liquid Propane Gas and gives you 28,000 Maximum BTU of reliable supplemental heat that can heat up to 1,400 sq. ft of living space. The space heater is perfect for not only just taking the chill out of the room but also for keeping your area warm on even the coldest winter days.

This radiant heater features the latest advancement in vent free infrared plaque burner design which uses larger plaques to provide more heat per plaque. Vent-free gas plaque space heaters are clean burning, fuel efficient and safe to use. Operating like the sun, infrared radiant heaters provide instant direct radiant heat to people or objects in the room.

This infrared plaque cabinet heater is equipped with a thermostat which allows you to maintain and control the desired room temperature. The easy push-button ignition makes it simple to start while the oxygen depletion sensor features an automatic shut-off design to keep your home safe. This heater can be mounted to the wall or the floor with the included mounting brackets and hardware. No electricity is required which is perfect for keeping you warm during power outages.

A great additional feature, this heater includes a pre-installed blower which helps spreads warm air throughout the room. The blower has two operating modes, thermostat and manual. In the thermostat setting, the blower will cycle on and off automatically as it senses heat from the heater. In the manual mode, you can choose from either on or off settings. The blower requires standard 120V household current but if the power goes out, your heater will still operate without the blower.



Added Value: Base Feet Included, a $50 value!



Product Features:

•Operates on Liquid Propane Gas Only

•28,000 Maximum BTU

•Heats Up To 1,450 Sq. Ft.

•Thermostat Control - The built-in thermostat automatically cycles the heater on and off to maintain your desired heat setting. Variable heat settings allow you to dial in your comfort level.

•Slim cabinet design takes up less room space.

•Economical: 99.9% efficient. No outside duct or chimney needed!

•Heat for only pennies an hour!

•Safety Assurance: O.D.S. (Oxygen Depletion Sensor) included with automatic shut-off.

•No electricity required to operate heater!

•Push Button Piezo Ignition System.

•Includes wall mounting bracket to mount to a wall

•Includes base feet to mount to the floor.

•Certified to ANSI standards for safe, clean-burning heat.

•PFS Certified

•Product Dimensions: 24.25" H x 25.5" W x 8.5" D

•Product Weight: 25.8 lbs.

•Vent-Free Gas Space Heater Model Number B28TPIR-BB

•1 Year Limited Warranty



What's In the Box

•Vent Free Heater - Qty. 1

•Thermostat Blower - Qty. 1

•Wall Mounting Bracket - Qty. 1

•Base Feet - Qty. 2

•Hardware Pack - Qty 1

• ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
• TECHNOLOGY - Maximum 28, 000 BTU Operates on using Liquid Propane Gas only Which Heats up to 1, 450 sq. ft Area.
• DEPENDABLE - Thermostat Control – The control automatically cycles the burner on and off to maintain a desired room temperature, Ideal for greater heat flow that could add the warm atmosphere in your room.
• ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
• SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
• 1 Year Limited Warranty

User questions & answers

Question:	is an external 2 stage regulator for the 30,000 BTU unit necessary
Answer:	For propane or natural gas? If you're putting in a new propane tank yourself, then you will have to install one. If you have natural gas, the regulator should already be out by the meter. And if you ALREADY have propane, the regulator is probably outside right where the propane line comes into the house. So, if you're unsure, just check with your supplier or utility company.
Question:	Do the unit get physically hot to the touch
Answer:	To my surprise it does not get hot to touch Not even the top
Question:	It says no electricity needed on product information. And in other information it says 120 volts . What gives? Does it come with a plug in attached
Answer:	it does come with a cord to plug into a 120v wall outlet. the cord only operates the blower fan, it will work and heat without being plugged in if you want to use the fan it will need plugged in. hope that helps
Question:	Can the unit be mounted to the ceiling facing straight down or does it have to be mounted upright to a wall
Answer:	Upright on the wall.

Product features

Bluegrass Living Vent Free Infrared Gas Space Heater With Blower and Base Feet - 28,000 BTU, Model# B28TPIR-BB

The Bluegrass Living ventless infra-red radiant gas wall space heater operates on Liquid Propane Gas and gives you 28,000 Maximum BTU of reliable supplemental heat that can heat up to 1,450 sq. ft. The space heater is perfect for not only just taking the chill out of the room but also for keeping your area warm on even the coldest winter days. The easy push-button ignition makes it simple to start while the oxygen depletion sensor features an automatic shut-off design to keep your home safe.

Blower and Base Included

Bluegrass Living Vent Free Infrared Gas Space Heater With Base Feet comes with the Base Feet and the Blower preinstalled! This allows an easy initial setup and cost savings for you!

Thermostat Control

Thermostat Control allows you to set the thermostat to your ideal comfort level. Just one push of the button to enjoy a great source of dependable, affordable heat.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99.9% efficiency, and operates on Natural Gas only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements.



DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages

ECONOMICAL - Cut heating bills by warming only occupied areas

COMFORT – Manually adjust the heat setting to your desired temperature

SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected

CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless

VERSATILE - Includes all necessary hardware & bracket for wall mounting

UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.

• Natural Gas Ready (Fuel conversion not permitted); Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
• Up to 30,000 BTU's/hr heats up to 1,000 sq. ft.; LOW-MED-HI variable control knob offers the most customizable heat settings
• No electricity required allows for reliable back-up heating incase of an emergency situation
• Separately sold optional fan (WHF100) improves the amount of square footage the heat reaches in a quiet, yet powerful way; Separately sold optional base legs (WBL100) allows for stable floor mounting
• 1 Year Warranty

User questions & answers

Question:	Battery ignitor not clicking or lighting, how do i fix it
Answer:	We are terribly sorry to hear you experienced an issue with this heater! Try replacing the AAA battery under the igniter button; just turn the button housing counter clockwise to take it off and replace the battery. If this does not work our Technical Support Team would be happy to assist you with assessing and resolving the problem! Just reach out by phone at 877-447-4768 or email here: http://www.ghpgroupinc.com/CTUS.html - GHP Group Customer Support
Question:	How long does the propane last before it runs out
Answer:	Depends on the size of your tank. I live in the mountains of north Carolina.we have a 100 gallon tank we fill twice a season. Suggest that you look for one with a thermostat. They are about the same price. Best heat I've had!! Highly recommended !
Question:	Does it have setting 1-5 for temperature? Does it turn on and off automatically
Answer:	According to the user manual, page 40, Model BF30NMDG (PDF manual is available on the Amazon webpage) "....At times the room may exceed the set temperature. If so, the burner will shut off. The burner will cycle back on when room temperature drops below the set temperature. The control knob can be set to any comfort level between "HIGH" (5) and "LOW"(1) ...."
Question:	does this heater have a hose and regulator with it
Answer:	No it doesnt you need a 2 stage low pressure regulator.

Product features

Dyna-Glo BF10NMDG 30,000 BTU

If you're looking for reliable supplemental heating, the Dyna-Glo 30,000 BTU Natural Gas Blue Flame Vent Free Wall Heater will blend seamlessly into your home, bringing heat and comfort to your space.

Blue Flame Heating Technology

Dyna-Glo's Blue Flame Wall Heaters use convection technology similar to your central home heating system. Blue flame heaters send heat outward, and then upwards to create a wide range of circulation. Using this technology, blue flame heaters will warm the air first, and then the surrounding objects.

Product description

ProCom Dual Fuel Vent Free Blue Flame Heater Model# MG10HBF is built for durability and efficiency to keep your home toasty warm for many cold seasons to come. This compact but solid heater gives you a reliable source of heat. It runs at 10,000 maximum BTU which heats up to 500 square feet of living space. No electricity is required which is perfect for power outages or any in-house urgencies. This dual fuel technology has one unit that operates on either natural gas or propane gas.

• Country Of Origin: China
• Model Number: MGH10BF
• Item Package Dimension: 6.38" L x 14.13" W x 19.13" H
• Item Package Weight: 14.6 lb

User questions & answers

Question:	will this work in a room 12' x 12'x 9' high and a room 20'x 10'x 9'high? can it stay on for 24- 7. does it have a themostat? thx
Answer:	Yes it will work. It’s designed to heat 300 to 500 sq ft It only has 3 settings Pilot/low/high. Can leave on 24-7
Question:	Does the legs come with it
Answer:	Legs are not included
Question:	Can i order legs for this unit
Answer:	Yes. Legs can be ordered separately.
Question:	does this heater have a thermostat ? or is it either on or off
Answer:	sorry it does not

Product description

This Radiant 20,000 BTU Natural Gas Vent Free heater is the perfect supplemental heating solution, even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat, warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.*WE ARE NOT ABLE TO SELL THIS PRODUCT TO CANADA AND CALIFORNIA* ** Please note when operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.**

• 20,000 BTU Natural Gas heater to heat spaces up to 500 sqaure feet.
• Radiant heat burner. Heating Area (Sq Ft) - 700
• Automatic low oxygen shut-off system (ODS). CSA Certified. Use - Supplemental heat in cold rooms, Additions, Sun rooms, Cabins
• Operating this heater at altitudes over 4,500 FT above sea level could cause pilot/ODS to shutdown the heater.
• Theromostat, legs and wall mounting hardware included. Refer to the PDF attached below in Technical Specification for User Manual.
• Thermostat for automatic temperature control
• For use with Natural Gas

User questions & answers

Question:	I have a gas fireplace, is this line enough NG to run this
Answer:	Thank you for your inquiry. The natural gas line needs 7 WC of pressure to adequately run this vent free heater.
Question:	The 20k and 30k both state the same dimensions? I have limited space so are they both the same size or is there a typo on one of them
Answer:	20,000 is 20" wide , 28" tall, and like 13" deep with the feet or like 9" without. Their description is of size is crap
Question:	Can i use this heater at 7000 ft above sea level
Answer:	i believe the air is thinner that high at sea level and you should be alright but i would put in a carbon monoxide monitor in that room just in case
Question:	Do these have a thermostate on them ? So they cut off when it gets to a certin temp and cuts back on when it drios below temp
Answer:	This heater does have a thermostat to control the desired temperature. It does cut in an out when temperatures are reached.

Product features

Radiant Vent Free Heaters

Our Vent Free heaters need no external power, great for power outages and applications with no electricity. They can be mounted to the wall with the supplied bracket or on the floor with the supplied feet.

Most common uses are rooms that don’t warm well so you can adjust the temperature level in them without having to affect the rest of the home.

There are two types of vent free heaters, blue flame (or convection heat) and Infrared (or radiant heat). The difference in these types of heat are how the warm.

The Infrared heater warms objects. It doesn’t warm the air like a Blue Flame. It can be put in an area with objects which the heater will heat and then the object will heat the air. Blue Flame warms the air, infrared warms objects, which heat the air.

Note: Units cannot be converted from Propane to Natural Gas and vice versa. They are not designed to be a primary source of heat, as they are designed to work with a furnace.

Product description

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with high, medium and low settings. Product Features: Operates on Natural Gas Only 30, 000 Maximum BTU Heats Up To 1, 450 Sq. Ft. Manual Control - High/Medium/Low/Off Settings Slim cabinet design Economical: 99. 9% efficient. No outside duct or chimney needed! Heat for only pennies an hour! Safety Assurance: O. D. S. (Oxygen Depletion Sensor) included with automatic shut-off No electricity required to operate heater! Push Button Piezo Ignition System Product Dimensions: 24. 25" H x 25. 5" W x 8. 5" D Product Weight: 24. 7 lbs. 1 Year Limited What's in the Box? Vent Free Heater - Qty. 1 Wall Mounting Bracket - Qty. 1 Hardware Package - Qty. 1

• ** ASSEMBLED IN USA - Product is proudly assembled in the USA. Skilled American workers manufacture the parts, assemble, and test our products. Only high-quality materials and parts are used in the manufacturing of our products. Our factory features state of the art manufacturing equipment.
• ** TECHNOLOGY - Maximum 30, 000 BTU operates on using Natural Gas only which Heats up to 1, 450 sq. ft Area.
• ** DEPENDABLE - Manual Control – High/Medium/Low/Off Settings, Ideal for greater heat flow that could add the warm atmosphere in your room.
• ** ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation.
• ** SAFE - Push button Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected.
• ** 1 Year Limited .

User questions & answers

Question:	Is the unit cool to the touch
Answer:	Power cord is estimated 3’. I had to come up with my own hanger because it was supplied with a wire harness and no way to attach it.
Question:	Is this approved for use in Massachusetts
Answer:	This heater is 70 inches long.
Question:	I try to use blower and keeps blowing out pilot light
Answer:	This heater can shine directly forward for 5-6 meters, and everything within this range can feel the heat.
Question:	I am trying to heat a hot yoga room to at least 110 degrees F. Does this unit automatically shut down at a certain temperature, at what temperature
Answer:	Nope

Product features

ProCom Heating Natural Gas Ventless Infrared Plaque Heater - 30,000 BTU, Model# MN3PHG

ProCom Heating’s infra-red space heaters are assembled in the USA and feature a new slimmer cabinet design with the latest advancement in vent free infra-red burner design. This NEW advancement provides more heat per ceramic plaque. No electricity is required which is perfect for power outages and installation. This unit has an easy to use manual control which operates with high, medium and low settings.

Infrared Heating

Infrared Flame Technology provides heat similar to the sun's radiant heat , providing a comfortable and affordable heating source.

Manual Control

Manual Control allows you to set for greater heat flow that could add the warm atmosphere in your room.

Wall Mounting

Wall Mounting Bracket included with the heater. The mounting bracket can be attached to the back of heater allowing you to hang the heater on the wall for better circulation.

Safety

Designed, Engineered and Tested in the USA. This product also features an O.D.S. (Oxygen Depletion Sensor) with automatic shut-off for safety assurance.

Product description

Dyna-Glo wall heaters are the ideal choice for safe, indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin, or garage. Since these heaters do not require electricity to operate, they make an excellent choice for everyday heating, and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99. 9% efficiency, and operates on Natural Gas only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. DEPENDABLE - Ideal for daily supplemental or emergency use, such as power outages ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT – Heater automatically adjusts to your desired temperature; just like your home thermostat SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT – One continuous press of the battery assisted igniter makes ignition quick & effortless VERSATILE - Includes all necessary hardware & bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.

• Natural Gas Ready (Fuel conversion not permitted)
• Blue Flame Technology works by convecting heat to warm the air the same way as a central heating system
• 10, 000-20, 000 BTU's/hr adjustable heat output for up to 700 sq. ft.
• Thermostat control knob automatically maintains your ideal heat level
• No electricity required allows for reliable back-up heating incase of an emergency situation

User questions & answers

Question:	What are the measurements
Answer:	Not to our knowledge, but we can only attest to our experience as we are one of many distributors selling this product line.
Question:	Where is gas inlet located
Answer:	That unit has an 8' 18/3 grounded cord set to plug into any 120V service outlet.
Question:	Can the heater be converted to propane
Answer:	That unit has an 8' 18/3 grounded cord set to plug into any 120V service outlet.
Question:	Whywould this pilot go out if over 4500 ft
Answer:	Warm, not hot

Product features

Blue Flame Technology

Similar to your home's central heating system, Blue Flame Technology heats and circulates the air.

Improved Circulation

Upgrade your unit with the optional fan (sold separately) for improved circulation in rooms up to 1000 sq. ft.

Floor Installation Option

Add on the optional base legs (sold separately) for floor installation.

Thermostatic Control System

Automatically maintains your ideal heat level.

Product description

Natural Gas Vent-Free Blue Flame Wall Heater uses natural convection to circulate warm, comfortable air evenly throughout room, uniformly providing cozy warmth like your home heating system. No venting, chimney or electricity is required, making this heater ideal for power outages. You also get easy temperature control, thanks to the multi-output valve. Convenient electronic piezo ignition offers simple, reliable starting and the automatic low oxygen shutoff system to keep safety. Includes brackets for wall mounting and legs for floor use. 

• Heat areas up to 1000 sq. feet, Uses natural convection to circulate warm, comfortable air throughout the room — great for family rooms, workshops, basement and other hard-to-heat areas
• 4,500ft. high altitude restriction, Clean-burning, cost-effective heat
• Easy installation with no venting or electricity required, making it ideal for power outages
• Includes brackets for wall mounting and legs for floor use Requires 6in. clearance from corner and side wall
• Multi-output valve provides easy temperature regulation Convenient electronic piezo ignition for no-hassle starting

Product description

If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 50,000 BTU Natural Gas Unit heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self-diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from Mr. Heater.

• 50,000 BTU per hour heats up to 1250 sq. ft.
• Powered exhaust allows for vertical or horizontal venting
• Easy outside access to thermostat and A/C terminals and gas connection
• Natural Gas to Liquid Propane conversion kit and 2 angle brackets for ceiling mount included
• Minimum 8 ft clearance from floor to base of heater required; Limited 3 year warranty on parts and burners and 10 year warranty on any defects in the heat exchanger

User questions & answers

Question:	Can this unit be installed through a cut out in the celing so it points down towards the floor while having the majority of the unit in the attic
Answer:	Highly unlikely. The louvers on the front that direct air flow have maybe 45 degrees of downward angle. This just seems like a bad idea
Question:	does it smell when running
Answer:	not after initial burn period .Very quiet compared to my last heater ,does not smell .
Question:	Can it run on a propane tank for a gas grill
Answer:	This heater can run on a gas grill propane tank. Make sure the propane conversation kit has been installed and then you'll need to use a grill hose that has the regulator on it. Then you'll have to change the fitting after the regulator.
Question:	One description says heats 700 sq ft another says 1250. Which is it
Answer:	It heats my 900 sq. ft garage nicely.