10 best engine parts cleaner

Product description

Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is a unique product for a few reasons. One, it comes with a drip basket, which is specifically geared toward those who prefer a hands-on approach when cleaning small engine parts. Second, the solvent included in the kit is not limited to auto use; it can clean metal parts in your home, garage or shop. It removes carbon, grease, oil, varnish, paint and grime deposits. Its formula is non-corrosive, non-chlorinated, contains no ozone depleters, phenols or cresylics. And third, Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is designed to diminish and remove adverse environmental characteristics. Surely anyone can appreciate that, especially when it comes to car parts.

• Cleaner comes in 96 oz. can
• Included drip basket is perfect for those who prefer a hands-on approach when cleaning small engine parts. Drip basket is included inside the can.
• Solvent is great for cleaning metal parts in home, garage or shop
• Efficiently removes carbon, grease, oil, varnish, paint and grime deposits
• Product is environmentally friendly and responsible; it is non-corrosive, non-chlorinated, contains no ozone depleters, phenols or cresylics
• Solvent formulated to thoroughly clean metal parts
• Removes soil and grime deposits

User questions & answers

Question:	Can you just put the carb in without taking it apart
Answer:	no it would not fit , also you will not get a good cleaning job. plus you could destroy some major components of the carb. not advised...
Question:	Can you submerge the tbi style 2 pin fuel injectors
Answer:	I do not know. I clean the fuel injectors for ny tractor.
Question:	can i get extra chemical say 1 qt
Answer:	I don't know but I doubt it.
Question:	What is the difference between this and berryman carburetor cleaner? Which is better
Answer:	I have always used Berryman but because of EPA rules, they removed a caustic compound from the mix and now doesn't clean as it once did. So far the Gunk works better and has one caustic still added. Your choice!

Product description

Cleaner Degreaser, Water-Based, Container Size 1 Gal, Color Clear Yellowish, Removes Grease, Oil, Dirt and Grime, Standards California South Coast Air Quality Control and USDA Approved.

• Safely dissolves grease and oils on most everything, product contains no acids, abrasive or petroleum solvents and is water based and biodegradable so safe for all uses even in septic systems
• Non toxic, non-corrosive, non-hazardous, USDA approved for non-food surfaces, call the toll free help line for professional cleaning advice
• Concentrated product, use the dilution chart on each bottle to achieve maximum product performance and value
• Household uses: Laundry precept, floors, carpets, tub/tile, grills, decks, asphalt and concrete driveways, stoves, boat hulls, white wall tires, siding and more
• Industrial uses: Engines, machinery, floor scrubbers, tools, pressure washers, parts washing, exhaust hoods, and more, used in restaurants, quick lubes, garages, production facilities, HVAC and more
• Just add water for the perfect light and medium and heavy duty cleaner

User questions & answers

Question:	will this stuff work on clothes in the washer
Answer:	This product works best on organic soils, and red clay is a mineral stain. It won't harm the stone, but I recommend using it stronger than label instructions. Using a pump-up, garden-style sprayer, mix Oxysolve 50/50 with water. Apply to a section of the stone and scrub with a non-metallic deck brush. Rinse before the cleaning solution has a chance to dry, or it will be more difficult to remove. IF the stain is lightened, but not completely gone, reapply the same way.
Question:	Anyone tried this on sealed asphalt oil stains
Answer:	Thanks for the question... If your walls are concrete or block/brick or some other typical exterior wall surface, you can use the Concrete and Driveway, or the Total Outdoor versions of Oxy Solve. For soot, I would recommend making the dilution for manual application stronger than what is on the label. Please try 1-part-Oxy Solve to 10-parts-water. Apply to the surface in sections so that you can rinse before the product has a chance to dry. Apply, let sit for 3-5 minutes, scrub, and rinse at highest pressure - or apply, let sit for 3-5 minutes, and pressure wash to rinse at highest pressure. If you can apply the solution with a pump-up, garden-type of sprayer and then pressure wash at high pressure to rinse, you'll be able to cover a larger area than if you use the pressure washer chemical application setting to apply the product (which sucks down product very quickly.) I hope this information helps and that Simple Green Oxy Solve does a great job on the soot and grime you are dealing with. Thanks!
Question:	How can i used this product in car engine? What step should i follow
Answer:	Wish I could tell you. It cleans great but you need to rinse it to tell. Without rinsing, in my opinion, is a waste of your time as the mess is still there.
Question:	Does anyone have a positive experience in removing OLD oil stain from concrete
Answer:	A lot of elbow grease needed. I was unable to even get dirt off my driveway. I was disappointed with this product.

Product description

CRC Brakleen brake parts cleaner is non-flammable and formulated to quickly and effectively remove grease, brake dust, brake fluids, oils, and other contaminants from brake parts, lining, pads. CRC is a worldwide leader in the production of specialty chemicals for the maintenance and repair professional, serving automotive, marine, electrical, industrial, and aviation markets.

• The original brake parts cleaner
• Formulated to quickly & effectively remove grease, brake dust, brake fluids, oils, & other contaminants from brake parts, lining, pads
• Cannot be sold for use in ca or nj
• Non-flammable
• This item is not for sale in catalina island

User questions & answers

Question:	how many oz is this
Answer:	I've never used it for that. I've been using WD-40 with great success to remove baked on plastic from a stove top in the kitchen. Simply spray WD40 on the problem area, let it sit for a few hours then take a razor blade and scrape off. You might want to test it out on an inconspicuous area to make sure it won't harm the car's paint.
Question:	how many cans do you get for the $7.73 price
Answer:	No it will not.
Question:	Can this be used on a bikes disc brakes
Answer:	I would not use on ABS.
Question:	Is it non-chlorinated
Answer:	This product will not remove paint.

Product features

CRC Brakleen Brake Parts Cleaner - Strongest BRAKLEEN Formula

CRC BRAKLEEN BRAKE PARTS CLEANER is the original chlorinated, non-flammable formula that quickly removes brake dust, brake fluid, grease and other contaminants from all types of brake systems including ABS. Superior cleaning and fast evaporation. Leaves no residue.

Product description

For 5400 Series KS530-595 Engines

• For 5400 Series KS530-595 Engines
• Installation instructions included
• Filter should be replaced each season
• Includes one air filter

User questions & answers

Question:	what are the part dimensions
Answer:	Don’t know dimensions.
Question:	Is this the same filter as 22-083-01-S just with the pre filter? I need filter and pre for 5400 series 18 hp
Answer:	It fits my 5400 series 18hp. 22-833-01
Question:	Should this pre filter be oiled
Answer:	Yes, it is quite clear in the instructions. Oil lightly and then squeeze out as much as you can.

Product description

Mr. Gasket Cataclean is a fuel and exhaust system cleaner that reduces carbon build-up and cleans your vehicle's catalytic converter, oxygen sensors, fuel injectors, and cylinder heads. Cataclean does not alter fuel composition and is safe for gasoline, diesel and hybrid engines. Testing at an independent emissions testing facility showed using Cataclean can lower your total hydrocarbon emissions by up to 50 percent (performance results are dependent on driver habits and vehicle condition). Use Cataclean to fix drivability issues such as power reduction, hesitation and hard starts, as a pre-treatment before an emissions test or to extend the life of your vehicle engine. Using Cataclean may help to avoid the replacement of costly oxygen sensors or your vehicle's catalytic converter. If you have to replace your catalytic converter, use Cataclean with the installation to extend its life. Cataclean is easy to use-simply pour in your fuel tank. Cataclean is 50 state legal and complies with VOC (including California) and OTC regulations, as well as Federal low sulphur content requirements for use in diesel motor vehicles and non-road engines. For optimum performance and protection, use Cataclean four times a year. Made in the USA.

• Using Cataclean can lower your total hydrocarbon emissions by up to 50 percent
• Reduces carbon build-up in catalytic converter, oxygen sensors, fuel injectors and cylinder heads which results in improved fuel efficiency
• Improves overall vehicle performance-including driveability issues such as power reduction, hesitation, rough idle, hard starts and lost fuel economy
• Safe for gasoline, diesel, hybrid and flex-fuel vehicles; does not alter fuel
• Not for use in 2-stroke or oil / gas mix engines

User questions & answers

Question:	Tried this today in my 08 xterra which 02 sensor code x few week and engine light hasn't gone off. :/. Next step reset code or try another bottle
Answer:	Try clearing the code. The light may come back on if the problem isn't fixed. Could be a bad cat, bad O2 sensor, other. This Cataclean did not fix the emission code on my 2013 F150
Question:	Does this fix the check engine light for a fuel injector code for 2007 Mazda CX
Answer:	I don't know. But I did not fix my 2007 Toyota Camry engine light.
Question:	Once you add this product to the gas tank what is the rest of the process
Answer:	add the product to the gas tank when it close to empty - for me that was about 2-3 gallons remaining - then really ran the car hard (like I stole it) - - filled the tank with high test and some injector cleaner- and again ran the car hard - check engine light stayed off for a good 6-8 hundred miles - more than long enough to pass NC emissions test - the light did eventually come back on - but then realized it was the fuel my wife purchased - - as I had her fill up with a different brand and light turned off
Question:	What if you can't go on highway my car won't go past 30mph
Answer:	I don't believe that it will help if your car will not go above 30. Sounds like something more serious with your vehicle.

Product description

K&N performance High-Flow Air Filters are engineered to improve engine performance by increasing airflow up to 50%. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environment friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world’s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration. Vehicle Fitment: 2011-2016 SCION tC; 2008-2015 SCION xB; 2010-2015 TOYOTA Rukus; 2009-2015 TOYOTA Venza; 2009-2013 TOYOTA Corolla; 2009-2013 TOYOTA Matrix; 2006-2012 LEXUS ES350; 2005-2012 TOYOTA Avalon; 2007-2011 TOYOTA Camry; 2009 PONTIAC Vibe

• ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle
• ENGINEERED POWER: State-of-the-art filtration media provides up to 50% more airflow than disposable paper filters to increase power and acceleration. Clogged or dirty air filters can reduce your vehicle’s acceleration by up to 10%
• EASY INSTALLATION: Pre-oiled and ready to drop into your factory air box. One of the easiest and most cost-effective upgrades for your vehicle for quick performance gains
• SAVES MONEY: K&N high-flow replacement air filters will save you $250 over 10 years by avoiding disposable filters
• ECO-FRIENDLY: Using a washable, reusable product helps reduce replacement waste. A K&N filter will last longer than 10 disposable filters
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• LOW-MAINTENANCE DESIGN: 50,000 miles before your first cleaning under normal highway driving conditions

User questions & answers

Question:	When i put it in my 2009 lexus es350, the size of my old filter and this one are the same but the k & n one just won't fit. should i cut the edge
Answer:	I have a 2014 Toyota Venza and the air filter was very hard to install. i contacted K&N and was told this is normal and to keep working with it and it should go in. I did what they said and eventually it went into the cover. Not easy but it did go in.
Question:	Will this fit 2014 Toyota Venza 3.5 L v
Answer:	Yes it will.Also refer to: http://www.knfilters.ca/search/appsearch.aspx?type=auto&year=2014&make=TOYOTA&model=Venza&engine=3.5L
Question:	Will this fit a 2010 toyota venza
Answer:	I don’t know, but when I ordered it there was a “check to see if it fits your car” question. Put in the year, make and model and they’ll let you know if it’s right for you.
Question:	i received the package with red liquid inside the plastic bag. Is that normal
Answer:	The red "liquid" is the necessary oil that keeps the cotton in the filter doing its job. After 50,000 miles you'll need to clean the filter, or as the package directions state, and it will need to be re-oiled.

Product features

K&N OE Replacement High-Flow Air Filters

K&N automotive replacement air filters are designed to add horsepower and acceleration to your car or truck while providing exceptional engine protection. K&N replacement air filters are simple to install and backed by the K&N Million Mile Limited Warranty. Not only are K&N air filters washable and reusable, they can last up to 50,000 miles between servicing, depending on driving conditions.

Designed to Increase Horsepower with up to 50% More Airflow

K&N automotive OE (original equipment) replacement air filters generally add 1 to 4 horsepower, due to the unique characteristics of our filter media. K&N air filter media was originally developed for desert motocross racing. K&N air filters were created for an environment that required maximum horsepower and acceleration while protecting the engine from the dirt and dust of off-road racing. This resulted in an air filter designed to achieve high, virtually unrestricted air flow while protecting your engine for the life of your vehicle. K&N washable and reusable air filters are made up of four to six layers of cotton gauze layered between two sheets of epoxy-coated wire mesh. The media is pleated and oiled to enhance overall filtration and performance.

Washable High-Flow Cotton Filter Media

K&N washable and reusable air filters are handmade in the USA using only the finest materials. It is almost impossible to wash your K&N air filter or air cleaner too much. K&N washed and re-oiled one K&N air filter more than 100 times, inside our testing laboratory, and it still performs up to specification. K&N air filters can go up to 50,000 miles between cleaning, depending on your driving conditions. To clean and re-oil your K&N air filter, use a K&N Air Filter Cleaning Kit and use the easy to follow instructions.

10-Year/Million Mile Limited Warranty

K&N warrants its street vehicle OE (original equipment) replacement air filters for one million miles. If used properly and found to be defective, return your filter with the receipt from purchase and K&N will replace it free of charge. Incorrect Cleaning or Use Voids Warranty.

K&N Air Filters should be cleaned every 50,000 miles for normal highway use, more often in dusty conditions. Cleaning should be done with K&N cleaner and air filter oil (or comparable air filter cleaner and oil). Use of compressed air, or chemicals not specifically designed to clean and re-oil cotton air filters (i.e. gasoline, transmission fluid, motor oil, lightweight oil, or diesel fuel) will void the warranty. Any damaged, abused or modified K&N Air Filters will not be warranted.

K&N Consumer Protection Pledge

The K&N Consumer Protection Plan goes a step further than the K&N Million Mile Limited Warranty. At times, the performance aftermarket has been plagued by automotive manufacturers and auto dealers that may attempt to discourage you from modifying your vehicle. They would prefer that you buy OE parts and not customize your car or truck and have even voided their own manufacturer's warranty due to vehicle modifications. K&N and the Magnuson-Moss Warranty Act protect consumers from such denied warranty claims. When you buy a K&N OE replacement air filter or air intake system you can be confident your vehicle's warranty will remain in effect. If you encounter a dealership that wants to void your warranty because of one of our products, K&N will resolve the issue so you won't have to. We believe K&N makes one of the world's best Air Filter.

Also available: K&N Cabin Air Filters

The K&N Washable Cabin Air Filter is the first of its kind designed to replace your vehicle's stock cabin air filter with a washable and reusable version that cleans and freshens incoming air. K&N Cabin Air Filters are designed to be cleaned and reused over and over again. Using a combination of an advanced synthetic filter media and K&N Refresher spray, the K&N Washable Cabin Air Filter grabs and holds dust particles.

Also available: K&N Wrench Off Oil Filters

K&N Oil Filters provide outstanding filtration levels and a high oil flow rate. They are able to handle heavy duty applications and block 99% of foreign material. They are also great with synthetic and conventional oils!

Also available: K&N Performance Intake Systems

K&N air intake products add horsepower, torque and acceleration to your vehicle. If you are looking to improve performance, K&N air intakes and cold air induction systems are easy to install and come with a million mile limited warranty.

Also available: K&N Recharger Kits

K&N air filter cleaning kits are composed of a six-step maintenance system designed to clean any K&N oiled cotton air filter. Cleaning and re-applying filter oil to your K&N air filter restores air flow efficiency so that it looks and operates like new again. The K&N Recharger Filter Care Service Kit includes K&N air filter oil and K&N Power Kleen air filter cleaner.

Product description

An EPA Safer-Choice certified industrial-strength cleaner & degreaser proven to be more powerful, safer, and easy than other degreasers on the market. WD-40 Specialist Cleaner & Degreaser is a water-based, non-flammable, non-aerosol cleaner & degreaser with a unique bio-solvent formula engineered to be powerful yet safe for sensitive surfaces. It quickly breaks through tough grease & grime and has added corrosion inhibitors to help protect against flash rust. Great for cleaning greasy automotive parts, tools, shop floors, industrial machinery, commercial appliances and equipment. It can even be used in cleaning equipment such as power washers and ultrasonic tool cleaners as long as rinse is discharged to wastewater treatment. *Safe for use on aluminum, chrome, glass, plastic, rubber, stainless steel, granite, leather, paint, and much more. *Biodegradable formula meets U.S. EPA Safer Choice Standards. NSF Registered A1, A2, A4, A8, B1. *Non-flammable, non-corrosive, non-abrasive, low-odor formula that can be used in food-processing facilities.

• Powerful grease remover and grime fighter in a biodegradable bio-solvent formula with durable, shatter-resistance trigger and convenient refill port; no funnel needed and no-mess
• Safe to use on multiple surfaces. Unlike other degreasers, this formula will prevent glass from etching and aluminum, copper, and metal from corroding and flash rust
• Non-flammable, non-corrosive, non-abrasive, low-odor formula that can be used in food-processing facilities
• Biodegradable formula meets U.S. EPA Safer Choice Standards and is 50-state VOC compliant. NSF Registered A1, A2, A4, A8, B1
• Excellent for cleaning greasy automotive parts, tools, shop floors, industrial machinery, commercial appliances, and equipment

User questions & answers

Question:	how about on bathtub grime - would it be safe to use on a americast tub
Answer:	Yes, maybe divide 6 times, don’t use too much at once
Question:	Is this safe to use for polyethylene folding table like the Laminate brand
Answer:	No. You should add it after you fill the tank up, so it can mix with the gas. And yes, it should also clean carburetor.
Question:	Is this safe to use for cleaning power tools? In other words, is it too harsh to clean rubber and plastics typically on power tools
Answer:	No, there is a product for Diesel engines, under 911 brand
Question:	Is this safe to use on my car windshield? Some hydraulic oil spilled on my windshield, hoping this will wotk and not leave any residue on the glass
Answer:	Thank you for submitting your question. STP Gas Treatment functions as a fuel stabilizer as well. STP Consumer Care.

Product features

WD-40 Specialist Industrial-Strength Cleaner & Degreaser

WD-40 Specialist Industrial-Strength Cleaner & Degreaser is a water-based, non-flammable, non-aerosol cleaner and degreaser with a unique bio-solvent formula engineered to be powerful yet safe to use across sensitive surfaces. It quickly breaks through tough grease and grime and has added corrosion inhibitors to help protect against flash rust. This formula comes in 5 different sizes: 24-oz refillable trigger, 32-oz trigger, 1-gallon jug, 5-gallon jug with pour spicket, and 55-gallon drum.

WD-40 Specialist

Whether you need the original blue and yellow can with thousands of uses, or a WD-40 Specialist penetrating oil, lubricant, cleaner, or solution to protect against or remove rust, we’ve got you covered. Get the job done right with a range of products – WD-40 Multi-Use Product, WD-40 Specialist and WD-40 BIKE – and live life hands on.

Product description

Gumout Carb / Choke and Parts Cleaner quickly removes deposits from the inside and outside of the carburetor to improve engine performance and fuel economy. Over time, carburetors and choke valves can become clogged with gum, varnish, and dirt, affecting performance. Gumout Carb and Choke Cleaner cleans carburetors, linkage, choke valves, and unpainted metal parts to improve performance and reduce emissions.

• Helps overcome hard starting, rough idling, stalling, and high exhaust emissions
• Quickly removes deposits from the inside and outside of the carburetor to improve engine performance and fuel economy
• Cleans gum, varnish, and dirt from clogged carburetors and choke valves
• Effectively cleans unpainted metal parts and is quick drying

User questions & answers

Question:	Will this work for a honda crf dirt bike
Answer:	I used it on two types of lawn mowers, one a push mower and the other a riding mower. It worked well on both, I don't see why it wouldn't work well for your bike.
Question:	Is this flammable or non-flammable
Answer:	Extremely flammable. Contents under pressure and can explode when exposed to heat or flames. May be ignited by friction, heat, sparks or flames.
Question:	Would this work on a piaggio zip 2t air cooled 17.5m carb
Answer:	I don't know why not. I've used on motorcycle, lawnmower, snowblower. All air cooled. Works well on disassembled carburetor for parts cleaning and difficult to reach passage ways too. Sometimes I even spray in some carb cleaner to use as a "starting fluid" as they seem to be quite combustible.
Question:	Is this 1 can or a case of
Answer:	1 can.

Product features

Get Your Engine Performance Back

Carburetor Deposits.

Gum, varnish and contaminants attach to the surfaces of carburetor and associated parts. These soils may interfere with engine performance and should be removed to prevent hard starting, rough idling, stalling and high exhaust emissions and reduction in fuel economy. Gumout’s Jet Spray Carb & Choke cleaner quickly dissolves this build up and dries quickly without leaving residue.

Product description

HIAORS Black Air Filter & Gasket Adapter Intake Kit for 6.5 HP Honda Clone GX160 GX200 Predator 212cc Engine Go Kart Racing Cart 196cc ct200 Doodle Bug Baja Warrior 200 Mini Bike Trailmaster mid XRX Go Kart

• For 6.5 HP Honda Clone GX160 GX200 Go Kart Predator 212cc Engine Go Kart Racing Cart 196cc Coleman ct200 Doodle Bug Baja Warrior 200 Mini Bike Go Kart
• Package includes: 1pc Air Filter + 1pc Adapter Kit+1 Set Gasket Mounting Stud Screws Hardware
• Aftermarket parts
• For the 212cc 6.5 Hp Predator engine 196cc
• Please Check The Size Before You Buy It

• Restore the Performance of Components: powered by a high-performance industrial transducer, easily cleaning small carburetors, injectors, bicycle parts, gears, bearings and guns;
• 200W Rapid Heating: efficiently heated cleaning and remove contaminants such as oil, grease, lubricants, dirt, corrosion and deposits;
• Safer and Easier: durable 304 stainless steel tank, 2L item capacity and 1.5L liquid capacity, skid-proof rubber feet, special design cooling fan, moisture proofed PCB and detachable power cord;
• Save Your Time and Costs: once set up and running, you are freed up to perform other tasks while the cleaner looks after itself;
• What You Get: digital ultrasonic cleaner, cleaning basket, connector, manual, free chemical resistant gloves gifts and our 12-month warranty and friendly customer service.

User questions & answers

Question:	Is there a minimum amount of cleaning solution recommended? To save fluid, I don't always want to fully fill the tank when cleaning very small parts
Answer:	This particular cleaner is very small only large enough in comparison to an average sized orange. These cleaners don’t require any cleaning solutions or solvents it just says to add water, but you can add simple green or 409 to the water to boost its cleaning strength. I found this particular ultrasonic cleaner to be too small for my needs so I replaced it with a 6 L.
Question:	Will this work on 110v/50hz? are transducers operated on dc current from internal ac/dc transformer, so input hz shouldn't effect operating freq
Answer:	Yes, it can run under 50hz.
Question:	Can revolvers be cleaned in the machine and does the cleaning solution come with the machine
Answer:	Hi Sandy, the liquid volume of the machine is 150 × 140 × 80mm. If your revolvers are larger than this size, please purchase a larger model of 3L ultrasonic cleaner. In addition, this product does not come with cleaning solution, thank you for your question.
Question:	Is the heater parts covered in the warranty
Answer:	Of course, we provide repair and replacement services for all main parts of the equipment for free.

Product features

Professional cleaning of Automotive components/ Motorcycle parts/ Bicycle parts/ Mower carburetor

With the ultrasonic cleaning deposits on the carburetor can be gently removed. The cavitation bubbles clean the carbs even in hard to reach places and significantly improve the operating behavior of the engine. The DAREFLOW ultrasonic cleaner can also be used for many other cleaning applications. This includes the cleaning of spark plugs, injectors, filters, fittings, screws and many more. If the item you are going to clean is a large carburetor and parts, please chose a 3L/6L or larger model.

The safest method of gun cleaning and restoration

Quickly and effectively clean rust, unburned powder, carbon, lint, oil and dirt from steel and stainless steel gun parts and maintain accuracy, integrity and effectiveness of firearms for longer periods.

Ultrasonic removal of biological contaminants

Ultrasonic cleaning of medical equipment, in combination with specifically formulated medical chemicals, removes the build-up of biologics and other deposits such as scale. Surgeries rely on ultrasonic cleaners to increase staff productivity and reduce costs associated with the replacement of improperly maintained surgical instruments.

DAREFLOW ultrasonic cleaners, CE, FCC and RoHS approved

1.Adding the right amount of cleaning solution during cleaning can significantly improve the cleaning effect.

2.Chemical resistant gloves contain natural rubber, it can effectly protect your hands from acid, alkali cleaning fluids and sharp objects.

3.If the machine needs to be operated for a long time (more than 2 hours per time), you need to stop the unit for 5 minutes after 15 minutes of continuous operation.