14 best gps with sensors

Product description

AS GPS HS Precision GPS receiver with heading sensor provides accurate course over ground reading and position fixes within 2.5 meters, even in lower signal areas.

• Standard with 360 Imaging
• When used with 360 Imaging, provides the ability to mark accurate waypoints anywhere on the screen
• Series: 1100, 900, 800, 700
• fast position fixes accurate within 2.5 meters
• Provides more accurate position fixes than the industry standard GPS
• 3.25 inch diameter, 1.5 inch high and comes with 20' cable
• 1 inch-14 thread count stem mountable with an optional atenna stem

User questions & answers

Question:	Will this work on my 997c
Answer:	The humminbird website says u need the AS GRP - External GPS Antenna
Question:	Will this work on my matrix
Answer:	If you mean Helix yes, otherwise no...
Question:	Will this work on my 898 C
Answer:	Yes, it should. Worked well with my 1199 so I don't see any reason it would not work with your 898
Question:	Will this work with a Helix 5 basic unit
Answer:	It doesn't look like it.

Product features

THIS IS WHERE YOU COME TO SEE THINGS MORE CLEARLY

Nothing clears the mind like a day on the water. And nothing sharpens your focus like a challenge. Whether it’s chasing the next trophy, or staying a step ahead of your competition, we build innovative technologies to shed new light on the world below, narrow your search and put an end to guesswork. All so you can accomplish what you came here to do. No wasted casts. No doubt.

AS GPS HS

The AS GPS HS is a precision GPS receiver with heading sensor provides fast position fixes with an accuracy within 2.5 meters. An internal compass also provides constant boat heading displayed on your Humminbird chart screen, even while sitting still. This heading sensor makes it easy to understand your boat’s direction in correlation to the GPS chart for precision boat control.

• Note: SOLIX and ONIX Series require purchase of AS GPS NMEA cable for connection.
• Note: this GPS receiver WILL NOT work with InterLink.
• Item # 408400-1

Product description

Description:

GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO-6M.

With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.

USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!



Features:

GT-U7 module, with high sensitivity, low power consumption.

Miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.

In the ordinary GPS receiver module can not locate the place, such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning.

Module with high sensitivity, small static drift, low power and lightweight volume.



Specification:

With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned

Operating voltage: 3.6V-5V (or direct usb power supply)

Operating baud rate: 9600 (can be modified)

Onboard rechargeable button battery

Onboard E2PROM can save parameter data

NEMA output format is compatible with NEO-6M

Size: 27.6mm * 26.6mm can be inserted or selected patch (with positioning holes)



Application areas:

Vehicle-mounted

Handheld devices such as PDAs

Vehicle monitoring

Mobile phones, camcorders and other mobile positioning systems

Sharing bike

Sharing mobile power



Package Including:

1 * GT-U7 GPS Module

1 * IPX antenna

• ★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make sure that the GPS module is in an open location.
• GPSBaud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
• With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
• USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!

User questions & answers

Question:	How do i change from dgps to gps mode? also, i find it quite inaccurate 20 miles off after running a while, could it be defective
Answer:	Hi there, What is the actual display on the module after you have run 20 kilometers? We have professional technicians who will calculate the error and give a solution. Thank you
Question:	Is there only one status led? if only the red led, what do the various flash rates mean
Answer:	The LED flashes in sync with the pulse output (digital output of the chip). This rate is set in the confifuation of the GPS chip. The U-BLOX configuttion software is a free download from ublox-com (I cannot provide the link). However, there are YouTube videos that show how to use it to change the configuration of the GPS chip. The name of the configuration software is u-center.
Question:	How long do we wait until it loads? Not sure if I should wait more than 10 minutes? Or less
Answer:	The GPS module works immediately. The GPS fix can take time depends on the last satellite that the module he registered. After the first time, it acquires it fix very quickly. If the GPS is not in use for several days, it can retake time to obtain a position fix. To get a faster position fix, make sure you have an unobstructed view of the sky. (The LED blinks when the GPS have a good signal and a position fix.)
Question:	Can this module run on a raspberry pi? i know the specs say 3.6v minimum, but the pi uses 3.3v logic
Answer:	Updated comment: I was powering the Vcc pin of the board from the 3.3 volt pin of a Raspberry Pi. I found the GPS performance of the board to be very poor with few satellites detected and frequent position loss. I switched the to powering the Vcc pin from the 5 volt Raspberry Pi pin. Performance is now excellent. Although indoors, the unit maintains an almost constant 3D position lock. Apparently, the Vcc pin needs at least 3.6 volts to regulate properly to 3.3volts needed by the internal GPS module. The 3.3 volts from the Pi is not sufficient for the on-board voltage regulator to pass the 3.3 volts through to the module. If using a Pi, power the unit from +5 volts! This does not affect the other I/O pins on the GPS board at all, as they all run at 3.3 volts.

• GlowShift GPS Speedometer Sensor Allows Users to View Their Vehicle’s Driving Speed Without the Need for a Lengthy Installation Process
• Compatible with Any GlowShift Speedometer Gauge
• Features GPS Antenna with 9-1/2' of Wire, GPS Signal Harness with 3' of Wire - Antenna Installs to the Roof or Top of the Trunk
• Includes Step-By-Step Installation Instructions
• GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support

User questions & answers

Question:	Does you know if this one works with the autometer
Answer:	I don't think so.
Question:	Will this sensor work correctly on a Sunpro Super III cp7215 speedometer? I would really like the instructions for the CP7215 if anyone would post
Answer:	I am sorry due to this adapter is made for our gauge and the pulse for our speedometer is 3,000~58,000. If the Sunpro gauge has the same pulse it will work fine.
Question:	How long does it take for the sensor to acquire a signal, and what does the speedometer do when the GPS doesn't have a signal
Answer:	Usually around 30-45 seconds to acquire a sigal after the initial connection to power. And it will set on zero mph until it aquires a signal
Question:	Will this work with an Autometer digital speedo guage
Answer:	not from what I've read.

Product features

Wiring for Installation

• 9.5’ of Wire for GPS Antenna
• 3’ of Wire for GPS Signal Harness
• 3’ Wire Has Power, Ground, Signal Wires
• Plug and Play Connectivity

Roof Installation

• Ensure Area is Unobstructed
• Clean and Prep the Surface
• Adhere the Antenna
• Route the Antenna Wire

Trunk Installation

• Confirm Clear Line of Sight to Sky
• Connect Antenna Wire to Controller
• Do Not Bend or Pinch Antenna Wire
• Secure Controller in Dry Location

Product description

US Global Sat GPS GNSS Location Sensor BU353-W10 Windows 10 Mapping Apps U-box

Here are some known Compatible Windows 10 Apps:

1. Microsoft Maps

2. GPS Map+

3. Avenza Maps

4. Map Factor GPS Navigation

5. GPS Satellite (Testing tool)

• GlobalSat bu353-w10 USB GPS sensor that supports Windows 10 mapping/ navigation/ data Logging applications. Win10 USB GPS sensor
• Not compatible with 1.) Mac OSX 2.) Linux 3.) Android 4.) iPhone/iPad iOS
• GPS Electrical Characteristics GPS Module: u-box M8M GNSS high performanceReceiver type : GPS/GLONASS Channels : 72Altitude Limit: 50,000 meters
• Velocity accuracy: 0.05 meters/sec heading accuracy: 0.3 degrees accuracy: 2.5M cold start: 26S hot start: 1S
• How to use:1. Install the driver (contact us for driver or download "u-box GNSS Sensor Device Driver for Windows, v2.33" from u-box website).Plug in BU-353W10Open your preferred Windows 10 GPS App

User questions & answers

Question:	Will this work to set waypoints as I walk around doing baseline surveying
Answer:	This version of GlobalSat only works on Windows. When the device is connected, a device driver is installed but no other software. You have to install some kind of mapping software. That software has to allow waypoints to be stored. I use a different version of GlobalSat which provides NMEA output. I use it with OpenCPN, a free chart plotting software for marine navigation. I do not know which software works with the GlobalSat 05-BU353-W10 GPS receiver. Sorry I could not help more.
Question:	how long is the cord
Answer:	About a feet
Question:	Ok, i give up. tried for a day and a half to get this to work with a surface pro 7 running win 10. anyone
Answer:	You need to install this ublox driver, google for this, ubloxGnss_sensorDeviceDriver_windows_3264_v2.40.exe, and download and run. you may need to reboot. To test grab the GPS Satellite from the windows store, is free.
Question:	I couldn't find the win 10 driver on u-box or u-blox webiste - plugged into win 10 pc but it doesn't work with microsoft maps - help me find driver
Answer:	Perhaps this link will help you find the drivers for this product: http://www.laptopgpsworld.com/5828-globalsat-bu-353w10-usb-gnss-sensor The link will take you to a site where two versions of driver downloads are listed I use this product on a Win10 Laptop PC with OpenCPN, Marine Navigation Software, works perfectly.

Product description

4 GPS tracker key finder color are black, green, blue, pink.



APP will shows where the item loss connection, this help you remind where you lost it, and find it easily.



Specification:

Finder distance: 0- 100 Feet

BT version: BT 4.0

Color: 1 x black, 1 x green, 1 x blue, 1 x pink.

Battery: Contains CR2032 Lithium Coin Battery (replaceable).

Compatible Device:

iOS: 7.0 version or later

Android: 4.3 version or later

iPad: iPad 1/2/3/4 or later, iPad Mini 2/3/4 or later, iTouch 5, iPad Pro 3/4 or later, iPad Air or later.





Connect APP

A- In the Google Play Store or Apple App Store search for "cTracing" or get the download link by scanning the QR code on the box, and download the APP;

B- Long press the button on the smart locator, hear the "drop, drop" twice, the LED light is on;

C- Search for the smart locator and connect to the app, slide left to delete the tracker, touch the ">" icon to rename the smart locator or disconnect;

D- Long press to shut down.



Photograph function

The smart locator and app are connected:

-In the app's Camera interface, press the button once to take pictures.



Package:

4 X Key finder (black, green, blue, pink)

• 📍GPS tracker for keys: Key finder uses BT 4.0 technology to connect Android, iOS, iPad and other smart phones. Show the lost car key, luggage, wallet, dogs, cats distance from you on the APP to let you find them accurately.
• 📍APP remotely control: Download free APP “cTracing” then pair it with your smart phone. When you press the remote button, the receiver sounds "beeps" you can hear voices from GPS tracker within 75 ft. 4 pack GPS tracker locator contains black, green, blue, pink,white for kids, pets, phone.
• 📍Two-way notification: Attach this wireless tracker to anything we always forget key or wallet and keep track of them, the 2-way key finder will lets you track lost items or be notified when they are out of range with a ring or flash.
• 📍Finder keychain: Key finder smart tracker is compact size, light weight and easy to carry like a key chain on your kids schoolbag or hang on pet collar, real-time viewing locator effectively avoids your kids, pets are lost. Provide a last seen pin-drop on map via APP to help you recover your items and search your car in parking site.
• 📍Multi-function: Anti-lost alarm, GPS tracking device, remote control self-portrait. Works as a remote shutter for self-portrait, You can remote control the smart phone camera of your with press on the finder button.

User questions & answers

Question:	How long can this device last
Answer:	Hi, friend, key finder uses CR2032 button cell, standby for up to 5 months, if the battery runs out of power, you can buy batteries in the store and replace it.
Question:	Can i use this with rechargeble lir or ml 2032 coin batteries
Answer:	Dear customer, yes, key finder can use the same size lir 2032 or ml 2032 coin rechargeble batteries
Question:	I can connect more than one key finder to one mobile phone
Answer:	Hi, friend, yes, this "c Tracing" app can connect up to eight key finders at the same time, so you can put keys, purses, pets and so on
Question:	Will this work if I don’t have Bluetooth
Answer:	Dear customer Hello, without BT, it will not be able to connect to your smart phone and you will not be able to use it.

Product features

Long Working Distance

• Working distance: 0-30ft (Adjustable), Max. The distance can be up to 75ft in the open air
• On connection status, if it lost connection with phone, the phone will ring. Keep your phone with you

Remote Camera

• Just remote the device camera of your phone by press a button.It can take awesome wide angle selfies from your front or rear facing cameras.
• Works as a remote shutter for self-portrait, capture the happiest moment easily.

Tracking and Locater

• Leave you away from unnecessary troubles like losing keys,pets,phones,wallets,bags,luggage,kids and so on.
• Bluetooth 4.0 Low Energy,4.0 Smartphone .Andriod 4.3 version and up-grade version.
• Compatible for IOS 8.0 or above and Andrioid 4.3 or above

• Winner of four-straight Golf Digest Editor’s Choice Awards for “Best Game Analyzer, ” Arccos Caddie is golf’s first and only fully-automatic performance tracking system. It features 14 sensors, one for every club in your bag.
• Access to the award winning Arccos Caddie app, golf’s Smartest Caddie.
• Automatic shot tracking, hands-free fully automatic data capture.
• A. I. Powered GPS Rangefinder, first-ever rangefinder that adjusts in real-time for wind (including gusts), elevation, temperature, humidity and altitude providing the most precise yardage in the game the Arccos Caddie Number.
• Personalized Caddie Advice that leverages A. I. to provide you with your optimal strategy.
• Smart Distance Club Averages, know how far to actually hit all your clubs so you select the right one for every shot.
• Strokes Gained Analytics with personalized insights using A.I. to highlight strengths and weaknesses and guide your practice & equipment choices
• Arccos Caddie Smart Sensors include the first year’s membership to the Arccos Caddie app

User questions & answers

Question:	Does this give you any features while your on the range or is it strictly for round play
Answer:	Arccos does not currently have the ability to track your shots or the distance of shots hit on the driving range. Arccos uses the GPS capabilities in your smartphone to track your shots while playing a hole on the golf course.
Question:	What is different about this from the 360 version
Answer:	We have rebranded the Arccos 360 product to Arccos Caddie Smart Sensors and have updated our packaging to reflect that change. The sensor technology remains the same.
Question:	How does Arccos differentiate between a practice swing and a real swing
Answer:	Arccos Caddie Smart Sensors will only register the last swing at any given location, allowing you to take as many practice swings as you need.
Question:	Can the batteries be replaced
Answer:	https://arccos.support.arccosgolf.com/customer/en/portal/articles/1750247--%E2%96%B8-changing-batteries-in-1st-generation-bluetooth-sensors

Product description

AutoMeter 5289

• Plug and Play with Auto Meter Electronic Programmable Speedometers.
• Lightning quick 10 Hz signal update rate is the fastest available.
• Fully sealed and paintable magnetic micro antenna (Dimensions: 1.472 in. x 1.339 in. x 0.508 in.). Includes 16 ft. of wiring for plenty of mounting versatility.
• GPS module is fully sealed against water and dust. Includes 6.5 ft. wiring harness. Case Dimensions:

User questions & answers

Question:	Will this gps interface works with the auto meter 1381 gauges
Answer:	Yes it should real simple positive negative and the signal cable ...... works real good
Question:	Will this work with an autometer 6387 gauge
Answer:	Yes it will for the speedometer signal.
Question:	Will this gps interface drive an autometer
Answer:	I don't know about a 1291 but it works great with my 5" electronic speedo...no problems, scooter joe
Question:	will this gps speedometer interface work with my metric KPH autometer ultra lite gauge
Answer:	Yes....

• 【Available For Peripheral Device】 XOSS G+ smart cycling computer supports working with heart rate monitor & cadence sensor device, which presents more professional riding data.(Heart Rate Monitor device is not included in this package, please purchase separately from XOSS Offical Store)
• 【High-Tech Cycling Computer】 XOSS G+ wireless bike computer is bulit-in high-sensitivity GPS chip, which allows the bike computer positioning system is connected to 4 satellite connectivity: GPS, Beidou, GLONASS, Galileo. Not only positions accurately the location of your riding. but also records the riding track automatically.
• 【Professional Data Analysis】 XOSS G+ bicycle computer contains speedometer and odometer functions, it helps you ride scientifically and effectively. Current speed, Current cycling time, Current cycling distance; Average speed, Altitude, Slope; Maximum speed, Current clock, Total mileage.
• 【Data Transmission to STRAVA】 Professional XOSS Cycling Computer Riding APP supports uploading your riding data via Bluetooth and synchronize with Strava the same time which make sharing your riding record & experience easy.Backlight, keystroke sound, auto pause, unit (metric or imperial), time zone can be set via the XOSS APP. The last two datas can also be set in the bike computer.
• 【Outstand Product Performance】1.8” HD screen of bicycle computer makes you easy to read with LCD display with auto-backlight; 500mAh rechargeable lithium battery provides up to 25 hours runtime, give you a better cycling experience. IPX7 waterproof protection allows bike computer work normally in rainning day.(Please do not put it into the water directly)

Product features

IPX7

1.It can be used on rainy days.

2.You can enjoy the riding in any weather.

THREE MODES OF BACKLITS

1.The back light mode can be adjusted by the XOSS app.

2.Auto Backlit Mode: After connecting to GPS, the back light will automatically turn on at night according to local time and stay on

3.Manual Backlit Mode: The backlit only comes on when you press the button.

4.Turn off backlit: The backlit will not light up either automatically or manually.

QUAD-SATELLITES SYSTEM

With GPS,GLONASS and Galileo satellites, it's faster and more accurate than ever.

Can't search GPS signal?

1.Please keep stationary and in an open and unobstructed area and press the left button "Start";

2.If it still doesn't not successful, please restart or connect the XOSS APP to reset it and try again.

3.If that doesn't work, please help to take a video to see if there is a mistake about the operation and back to us here.

ANT+ SENSORS SUPPORT

The computer support Ant+ sensors.

Steps:

1.Long press the right button to turn on.

2.Turn on your sensors.

3.Long press the left and right buttons to enter settings.

4.Move your sensors and it will be connected to bike computer automatically.

LONG BATTERY LIFE & BUILT-IN BAROMETER

Rechargeable lithium Battery. A single charge lasts up to 25 days on the basis of 1 hr continuous operation per day.

With a built-in barometer, you'll know how high you've ridden on the longest climbs or on your way through the city.

WHAT'S IN THE BOX

1 x XOSS G+ computer

1 x Computer Mount

1 x Micro USB cable

1 x Mount Rubber Pad

2 x Rubber Bands

1 x User Manual

Just rotate the computer to install it.

The Garmin mount is also suitable, if you want other style mounts, please buy in the store.

It can be mounted on the stem or handle bar.

Product description

Navigate your next outdoor adventure with the GPSMAP 66 series. Whether you’re hiking, hunting, climbing, geocaching, kayaking or mountain biking, you can explore more with this premium, rugged handheld with a 3” color display. It features access to BirdsEye Satellite Imagery with direct-to-device downloads to help you find your way plus preloaded TOPO U.S. and Canada maps on GPSMAP 66s. And it offers offers multi-GNSS support as well as wireless connectivity for Active Weather, direct downloads and Garmin Explore compatibility.

• Premium GPS handheld with BirdsEye Satellite Imagery subscription
• Large, 3” sunlight-readable color display for easy viewing
• Multiple Global Navigation Satellite Systems (GNSS) support to track your travels in more challenging environments than GPS alone plus three-axis compass and barometric altimeter
• Access to BirdsEye Satellite Imagery with direct-to-device downloads and no annual subscription and preloaded TOPO U.S. and Canada maps
• Expanded wireless connectivity supports Active Weather for up-to-date forecasts and animated weather radar and Geocaching Live for mobile syncing and updates

User questions & answers

Question:	Can this take onX chip
Answer:	Yes
Question:	How big an sd card can you use
Answer:	You can use any size card you want, there are tutorials on how to use 128GB card and we suspect that you can also use 256GB card, big problem is that it must be formatted in Fat32 format which is a very old format, and if you transfer payloads larger than 4 GB in size the files will get corrupted, Fat32 is also very slow, so if you go for the big 256GB card, prepare to take several weeks to upload that many maps, and also prepare for the GPS to take several minutes to read the whole library. 32GB memory stuff they say is absolute rubbish, google it and you will see, if it can be done with 64, it can be done in 66.
Question:	Can it be run on aa/aaa batteries or does it require the rechargeable pack
Answer:	Unlike its sister GPS only device, the GPSMAP 66st the InReach added GPSMAP 66i only comes with a built-in rechargable battery which is not accessible by the user. I suspect that this is because the energy requirements needed to push InReach messages far into space to passing Iridium satellites requires a battery with more capacity than AA batterirs can provide. So, like all InReach models the GPSMAP 66i has an internal lithium battery that is not accessible by the user. When, after many years if service it dies, a replacement can be swapped in by Garmin and the unit resealed to meet the waterproof standard.
Question:	Do you need to add a service provider or can you just use it as is
Answer:	I appologize in advance to those who understand the following information. But to those new to the world of InReach satellite communications I will try to explain the basics. The InReach features buit into the GPSMAP 66i are for text and email (no photos) messages to anyone from anywhere on Earth using the Iridium Satellite nexwork. Garmin provides these services for reasonable price plans that can meet every budget from $13/ mth. To $70/mth depending on your expected use of the system. InReach also can provide Remote Tracking which will send your position via the satellites to a unique map page where family and friends can follow your progress. Garmin has two types of plans, each with the multi-level options mentioned above. The Annual Contract plan keeps your InReach active and ready to communicate at all times, like a Cell phone. If you choose this plan you are committed for the first year no matter what your actual usage. After that you are free to drop the service at any time. They also offer a convenient and flexable Freedom plan that costs a bit more but lets you deactivate the InReach for any months when you won't need it, It costs $24.99 each year plus the first month's cost depending on the level of service you choose. After that first month you may deactivate or activate it on a month to month basis. The only thing to remember is you MUST activate before heading into the backcountry away from Internet access. Activation and deactivation may only be done on-line. Never from the InReach via the satellites. The satelllites will not accept any messages ( even SOS) from deactivated units. All InReach services are provided through Garmin via your unique account site. If you choose not to sign up for an InReach communication plan you may use all of the other features of the GPSMAP 66i. But if you NEVER intend to use the InReach features I would suggest you consider buying the GPSMAP 66st at a lower price but without the capibility to use the InReach communication and SOS services from remote location beyond the cellular range. As for me, I would spend the extra money for the GPSMAP 66i and keep the option to activate InReach communnications if only to have the ability to contact emergency sercices at the press of an SOS button or to get roadside help from a dead Cell zone. The plans are flexable and inexpensive and can save your life.

Product features

Premium GPS Handheld with BirdsEye Satellite Imagery Subscription

Get Your Bearings

In addition to multi-GNSS support , the GPSMAP 66 series provides ABC (altimeter, barometer and compass) sensor capabilities to track your journey. The built-in altimeter provides elevation data to accurately monitor ascent and descent, while the barometer can be used to predict weather changes by showing short-term trends in air pressure. The three-axis electronic compass keeps your bearing whether you’re moving or not.

See Where You’re Headed

Get a better picture of your location with high-resolution photo-realistic views of your route, thanks to direct-to-device downloads of BirdsEye Satellite Imagery — without an annual subscription. You’ll see a true representation of your surroundings to find trails, trailheads and clearings for campsites, to pick stand locations for hunting, to find parks and parking for geocaching and even to create waypoints based on landmarks.

Plus, GPSMAP 66st comes preloaded with TOPO U.S. and Canada maps. You’ll see every hill and valley, with more detail than ever — including terrain contours, topographic elevations, summits, parks, coastlines, rivers, lakes and geographical points.

Stay Tuned to Conditions

You’ll always stay informed of weather conditions when you pair your GPSMAP 66 series device via Bluetooth to a compatible smartphone. Receive Active Weather updates for real-time forecast information, including predictive maps for temperature, wind, precipitation and clouds. It also provides live weather radar so you’re aware of inclement weather that can affect your outdoor adventures.

Find Your Cache

GPSMAP 66s and GPSMAP 66st devices make it easier than ever to enjoy your geocaching experience. Set it to automatically update with all the latest caches from Geocaching Live, including cache descriptions, logs and hints. With a Wi-Fi connection or through Garmin Connect on a compatible smartphone, you’ll avoid manually entering coordinates or printing out cache details on paper — and each find will automatically upload to your Geocaching website

Explore with Garmin

Even when you’re offline and have no cell service, the GPSMAP 66 series pairs with the Garmin Explore mobile app to let you plan, review and sync data, including waypoints, routes and tracks. Plus, you can review completed activities while still in the field, even when you’re off the grid. Once you’re home again, plan for future trips and review previous activities from the Garmin Explore website.

Utility in Adverse Environments

Be prepared for the most extreme adventures. The GPSMAP 66 series offers up to 16 hours of battery life in GPS mode and 1 week in expedition mode (with 2 AA batteries). It provides an LED flashlight and SOS beacon that can be used to signal for help. It’s built to military standards for thermal, shock and water performance (MIL-STD-810G), and it’s even compatible with night vision goggles.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Wi-Fi is a registered trademark of the Wi-Fi Alliance.

• [BUNDLE INCLUDES] - Arccos Caddie 3rd Generation Smart Sensors (Set of 14) Golf GPS Stat Tracking System (for iOS & Android) & PlayBetter Portable Charger
• [NEW A.I. POWERED GPS RANGEFINDER + AUTOSHOT TRACKING] - Arccos Caddie automatically tracks every shot and to provide you with a digital replay of every round + first-ever rangefinder that adjusts in real-time for wind (including gusts), slope, temperature, humidity and altitude giving you the Arccos Caddie Number, the most precise yardage in the game.
• [PERSONALIZED CADDIE ADVICE + ADVANCED ANALYTICS] - A.I. supported to provide you optimal strategies and caddie advice, while Advanced Analytics powered by gained strokes delivers performance breakdowns to guide your practice and choosing the right equipment.
• [SMART DISTANCE CLUB AVERAGES + WITH 1-YEAR SUBSCRIPTION] - Know how far to actually hit all your clubs to precisely select the right club for every shot with the Smart Distance Club Averages feature, plus enjoy free iOS & Android apps and 1-Year of Arccos Caddie subscription starting from the date activated.
• [PERFECT BUNDLE] - One of the hottest products in golf; for the golfer who wants a more analytical approach to their game, you can't beat the Arccos Caddie 3rd Generation | The PlayBetter Portable Charger ensures your phone stays fully charged so you can utilize the Arccos Caddie 3rd Generation all day on the course!

User questions & answers

Question:	Does this product require a subscription
Answer:	It includes a one year free subscription and you would need to renew it after that to use the app.
Question:	does this work with android phones
Answer:	Yes, I have Samsung S9 phone...works great!
Question:	Will inserts fit any type of grip
Answer:	The inserts crew into the grips; so, I believe, yes.
Question:	any annual subscription cost
Answer:	You get 1 year free than $99 a year.

Product features

A.I. Powered GPS Rangefinder & Personalized Caddie Advice | Experience a New Level of Winning!

Introducing the new and first-ever A.I. Powered GPS Rangefinder that adjusts in real-time for wind (including gusts), slope, temperature, humidity, and altitude giving you the Arccos Caddie Number, the most precise yardage in the game. In addition, Personalized Caddie Advice utilizes A.I. to provide you with your optimal strategy to deliver smart and better performance while Strokes Gained Analytics highlight strengths, weaknesses, guide your practice and equipment choices.

Smart Distance & Advanced Tour-level Analytics | Your Guide to Better Practice

Strategize your next step on how to improve your game through Advanced Analytics provided on each round. Your overall performance is broken down to guide your practice and help you select the best equipment. While the Smart Distance feature lets you know how far to actually hit all your clubs so you select the right one for every shot.

Fully Automatic, Hands-Free Shot Tracking & Smart Caddie Advice | Get Connected

Play right away without any interruption with its fully-automatic, hands-free shot tracking and data capture! Also features Leverage Artificial Intelligence that allows you to see your best shot strategy for every shot, on every hole, on any course in the world + all full set of smart sensor purchases include the first year’s membership to the Arccos Caddie app starting from the date activated.

13 Regular Arccos Caddie Sensors

Features 13 regular Arccos Caddie sensors – one for every club in your bag!

1 Arccos Caddie Putter Sensor

Get smart analysis and information about your putting stroke; and experience an average handicap improvement of 4.2 strokes during the first year, and some in as few as 5 rounds!

PlayBetter 2200mAh Portable Charger

Never run out of battery! With our PlayBetter 2200mAh Portable Charger, you can keep your smart sensors and other gadgets charged at all times.

Product description

Is your 6-iron really your 150-yard Club? how far do you consistently hit your drives, really? is it a pitching Wedge shot? or more like a 9-iron? it’s easy to know for sure with approach CT10 golf Club trackers that automatically track every shot on any Club -even your putts.

• Installed sensor automatically tracks every shot on any club and keeps score
• Pairs with compatible Garmin golf watches to automatically track every stroke, including locations, distances and club type
• Collects data from each shot and club so you can analyze strokes gained and other stats used by professional golfers
• Stats for each club with a sensor installed show up on your compatible Garmin golf watch after pulling the club from the bag
• See how far you typically hit each club; view stats for accuracy to the fairway or green

User questions & answers

Question:	is it worth the three pack just for driver, putter and wedge
Answer:	Approach CT10 club trackers are available in a full set to track all 14 clubs in your bag. This set lets you know how far you consistently hit each club and also which club you hit for every shot during every round from tee to green, including your putts. If you only want to go with the three-sensor starter pack, add sensors to your wedges and putter to track chip shots next to the green and your putts, and rely on your compatible watch’s AutoShot¹ feature to track your other shots. For more information contact us at [email protected] or visit our Support Center, https://support.garmin.com/en-US/ Thanks Jenny
Question:	Is it useful at a driving range
Answer:	The sensors are not useful at the driving range because you are unable to go to where the ball landed and hit a second shot giving you the distance of the first shot.
Question:	Is it possible to use approach ct10 together with vivoactive 3 watch and garmin connect / garmin golf apps in my smartphone
Answer:	No, at the moment. There was the press release announcing the compatibility with vivoactive 3 in future. However, we cannot find it.
Question:	I want to just download the app to my android phone. i do not want the watch. do i have to have a garmin watch for the tracking system to work
Answer:	Yes, you need to pair it with a compatible watch. I'm not aware of any way to do it with the app on a device. Talking from experience, I had an Accros and having the sensors pair with your phone with the app is a pain. You need to keep the device in your forward pocket to listen to your shot, drains your battery, makes it hard to have a call(not that you should). So it was a big improvement to switch to the Garmin watch with the CT10 sensors.

Product features

Pair with Your Garmin Golf Watch

Pair with compatible Garmin golf watches for automatic game tracking so you can focus on your game — knowing the sensor is tracking every stat. Those stats for each club with a sensor installed show up on your Garmin golf watch after pulling the club from the bag. See how far you typically hit that club, and view stats for accuracy to the fairway or green.

Approach CT10 club trackers are available in a full set to track all 14 clubs in your bag. This set lets you know how far you consistently hit each club and also which club you hit for every shot during every round from tee to green, including your putts. If you only want to go with the three-sensor starter pack, add sensors to your wedges and putter to track chip shots next to the green and your putts, and rely on your compatible watch’s AutoShot¹ feature to track your other shots.

Track More Stats with the Garmin Golf App

Add the Garmin Golf app to your compatible smartphone to gather key stats and data you can use to help you work to improve your game. Review your stats in the Garmin Golf app for accuracy to the fairway or green and for drives, approach shots, chip shots and putting to help you know what parts of your game need more focus. You can also track and analyze strokes gained and other stats used by the PGA. Use strokes gained data and stats to show how many strokes you have gained or lost relative to a baseline comparison to other players in your group.

Change as Your Game Changes

Suddenly, you’re hitting some clubs farther. And maybe other clubs seem to be falling short. Your game changes from season to season and with the years. With Approach CT10 sensors on your clubs, you can identify those changing trends and adapt your game to help avoid hitting too long or leaving shots short.

Product description

This is the ultimate GPS module for your Raspberry Pi, Arduino or other microcontroller project! The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Includes an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on. Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can easily add one. Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Battery not included. Many tutorials available at Adafruit's website.

• -165 dBm sensitivity, 10 Hz updates, 66 channels
• 5V friendly design and only 20mA current draw
• Internal patch antenna + u.FL connector for external active antenna
• Built-in datalogging
• Perfect for Raspberry Pi, Arduino and more!

User questions & answers

Question:	Does this come with an antenna
Answer:	It has an integral antenna, but it isn't very effective indoors (maybe right next to a window). It has a U.FL connector which can be used for some small external antennas. Most of the time, you'll need a U.FL to SMA adapter cable for most external GPS antennas. Check out the adafruit site for more details.
Question:	Can the CR1220 battery work as a backup battery for RTC when 3.3V input is off? How long does the battery last with the 20mA consumption
Answer:	Hi Gustavo, A typical CR1220 battery holds approximately 40mAh. The GPS should last approximately 90-120 minutes on the battery alone. If you have any additional questions, please feel free to contact us. Thanks again!
Question:	can this be a direct replacement for LS20031 gps??? im planning to replace a gps on my immersion rc EZOSD unit..LS20031 gps is much more expensive
Answer:	Yes, the GPSs both have the same data output sentences over UART according to the standards set by the National Marine Electronics Association
Question:	Is there any way if I were to connect this to a raspberry pi and have it in my car, and my car was stolen, could I track it
Answer:	Sure, if the raspberry pi is connected to internet, and your gps (Adafruit Ultimate GPS) is constantly reporting the location to somewhere (like a server). Now the solution you gotta come up is how you're going to connect the raspberry pi to internet, and keep the raspberry PI powered up.

Product description

IIL GPS Speedometer Antenna / Sender and receiver. Can directly use for programmable speedometer sending unit. Power: 10-30 VDC Output 1: pulse output, 16,000 pulse/miles, or 9,943 pulse / km. See signal screen shot below. This signal is for speedometer input, normally only need to use this. Output 2: standard NMEA0183 protocol output, 9600 baud rate, RS232 series signal. Can be directly use for navigation system input. This signal is not for speedometer input use. Indicate LED: green – signal is good, red – weak or no signal. GPS signal update rate: 10/second, or 10 HZ. Dimensions: 2” x 1.5” x 0.65”; Mounting holes distance: 1.9”; Cable length: 4’ (48”), mounting screws are not included. Accuracy: 3M-CEP Wiring: Red: Power 10-30VDC White: Pulse signal Green: NMEA0183 signal Black: Ground In order to use this sender as a speedometer sender, your speedometer must can setup pulses/mile to 16000, if your speedometer does not have this parameter, you can NOT use this GPS sender. Manual: www.intindustry.com/files/GPS_Specification.pdf

• GPS Speedometer Antenna / Sender and receiver.
• Can directly use for speedometer sending unit, no antenna needed.
• Pulse output, 16,000 pulse/miles, power 10-30V.
• GPS signal update rate: 10 times/second, or 10 HZ

User questions & answers

Question:	How fast does this update
Answer:	10 updates each seconds (10 HZ) internally.
Question:	Does this unit have mounted in full satellite view or can it be hidden
Answer:	mount inside car is ok, such behind the winshield, but can not under the metal cover.
Question:	Can this be mounted under a fiberglass dash
Answer:	I don't know. I was told it had to be mounted in the open.
Question:	Is this the same sensor sold from new vintage usa
Answer:	I can not be sure but there is possibility.

Product description

At last, a GPS Speed sensor which can be considered something more. GPS technology offers many benefits in today’s world: accurate speed information, precise location tracking, repeatable information, and so much more. When Dakota Digital set out to create a GPS receiver, it was never to create just a means of driving a speedometer, but rather to extract as much useful information as possible, making the value of the product unlike anything else available. Highly advanced electronic and software design allow the GPS-50-2 to work unlike anything else, with accelerometers and predictive software to compensate for times when GPS inherently struggles: overpasses, mountains, tunnels, heavy tree cover, large buildings, passing large vehicles, etc. Unique electronic architecture provides for negligible current usage when off, yet lightning fast start-up and signal acquisition. Updating the speed information 10 times per second provides tremendous accuracy, while the integrated omni-directional antenna provides for a wide range of installation flexibility.

Want to use the GPS-50-2 to activate a cruise controI system? No problem! A cruise control system requires a great deal of resolution and accuracy, so adding the 600041 external antenna (sold separately) will allow you to optimize the antenna mounting, while placing the GPS-50-2 receiver anywhere you like!

When used in conjunction with a Dakota Digital VFD3 with a BIM-compatible black plastic control module, VHX or HDX Instrument system, a simple connection to the control box adds accurate Speed information, Compass heading, Altimeter data, and automatic Clock syncing, all with fully automatic calibration! No DIP switches, no guessing, no inaccuracies, period.

• When used in conjunction with a Dakota Digital VFD3, VHX or HDX system, a single data connection cable adds accurate speed info, compass positioning, altimeter data, and automatic clock syncing.
• The GPS-50-2 measures in at an easy-to-hide size of 4-3/4”x2-3/4”x1”, and is completely covered by a two-year warranty.

User questions & answers

Question:	I need a gps signal and a regulator / adapter for the speedometer oem of a toyota of 91, this product can solve my problem
Answer:	Your answer can be found by going to Dakota Digital website or contacting tech support.
Question:	I need a gps signal and a regulator / adapter for the speedometer oem of a toyota of 91, this product can solve my problem
Answer:	that i'm not sure of, contact Dakota Digital with that question.
Question:	How do you wire this into a 2 wire dash input
Answer:	I am not sure what is meant by a 2 wire dash input but if you have any questions at all, contact Dakota Digital. They will be very helpful.
Question:	What is the speed output voltage
Answer:	Here are the SPEED OUTPUTS. Let us know if you have any other questions. Would be more than happy to help. Update Rate 10 Hz SPEED 1 Ground switching (1.4 A max) SPEED 2 +/- 6V typical at 13V power CRUISE Ground switching (0.3 A max)