14 best briggs stratton push mowers

Product description

This flat panel style, Pleated-Paper air filter provides superior protection against the destructive effects of dirt ingestion. Used on select Quantum & 625-675 & 625E, 675E, 725E Series, & many other engines, This OEM part ensures proper fit & performance to maintain the life of your Briggs & Stratton engine.

• Material Type: Plastic
• Power Source Type: Non Powered

User questions & answers

Question:	i have a push mower .. briggs and stratton quantum power model #22545x92E .. about 15 years old .. 22" murray. i need an air filter .. please help
Answer:	The set I bought was the 3/8” drive size but I’m sure you can order the size you need including the 1/2” drive size.
Question:	Is the size exactly 5-1/4 x 4-1/2 x 1 in. ? The production at listing says different
Answer:	No they will not work on left handed threads the fins on the inside that catch the bolt head go the opposite direction
Question:	I have a Toro model 20372 with 6.5 HP engine. The engine is made by Toro, not Briggs and Stratton, Tecumseh, Honda, etc. Will filter fit this engine
Answer:	Look into a stud/bolt extractor - just be advise that these are bulky in case you are in close quarters.
Question:	Is this a Briggs and Stratton branded filter? Thanks
Answer:	What nicholas h. Said isnt true. There is a brand called rocket socket and they are the same thing but made in the usa. Probably a little better quality but they are twice the price so the choice is up to you.

Product features

Briggs & Stratton Genuine Air Filters

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts designed to fit perfectly, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Changing a Paper Air Filter

Loosen the cover screw and tilt cover down. Carefully remove and discard the paper air filter. Install new cartridge with the paper pleats facing out. Close cover and tighten screw securely.

Changing a Foam Air Filter

Loosen screw from housing and remove air filter from assembly. Saturate the new Briggs & Stratton foam air filter with fresh engine oil. Wrap foam in clean cloth and squeeze to remove excess oil. Assemble foam air filter over edge of body and re-attach cover

Dual Element Air Filters

Remove knobs and cover from filter housing. Carefully remove foam pre-cleaner if necessary and clean area of any debris. Place new air filter with pre-cleaner, if necessary, and attach cover and knobs.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

Briggs & Stratton 18 oz 30 w

From the Manufacturer

Genuine Briggs & Stratton 18 oz. bottle of high quality SAE 30 W detergent oil that is specially formulated for higher operating temperatures of air-cooled engines.

• High quality SAE30 oil
• Specially formulated for higher operating temperatures of air cooled engines
• This OEM oil ensures proper fit and performance to maintain the life of your Briggs and Stratton equipment

User questions & answers

Question:	it is ok for power generators
Answer:	The Jaws come all the way together when closing
Question:	is full sinthetic or sinthetic blend
Answer:	That is not a good idea. The fact that you're dealing with a weakened bolt means you're asking for it to break off down in the hole when impacted. Even if the stud extractor doesn't break the stud might and you're worse off than before.
Question:	Does this work on a Troy Bilt pressure washer
Answer:	It should as long if you can get enough of it inside the socket
Question:	Can it be used in a snow blower
Answer:	It only goes to 19mm

Product features

Briggs & Stratton Engine Oil

Briggs & Stratton small engine oil is designed and proven to meet the demands of 4-cycle engines. Our oil products have been approved by Briggs & Stratton engineers, recommended in all operator manuals, and is a high-quality detergent oil classified SJ/CD by the API.

Small engine oil type recommendations:

Different oil types can work best at certain temperatures. Learn which one to choose for your climate:

• SAE 30- Warmer temperatures, most common oil for small engines
• SAE 10W-30- Varying temperature range, this grade of oil improves cold weather starting, but may increase oil consumption
• Synthetic SAE 5W-30- Best protection at all temperatures as well as improved starting with less oil consumption
• SAE 5W-30- Very cold temperatures
• Vanguard 15W-50- Varying temperature range. For continuous-use, such as commercial lawn cutting or pressure washing

When choosing lawn mower oil, use a high quality detergent oil classified as 'For Service SF, SG, SH, SJ' or higher. Do not use special additives.

Synthetic oils are an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

Different oil types can work best at certain temperatures. Learn which one to choose for your climate.

Product description

Genuine Briggs & Stratton replacement part for small gasoline engines. This OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Briggs & Stratton 690822
• New OEM Push Rod Guide
• Genuine Briggs & Stratton Part
• Replaces Old Briggs # 495248, 690822

User questions & answers

Question:	does this come with bolts
Answer:	Yes,Need to turn the damaged screw counterclockwise.
Question:	Will this work on model 31R907 0018 G
Answer:	Well its a bolt extractor not bolt installer..... So..... common sense says counter clockwise or lefty loosy
Question:	Will this work on engine model number 31P
Answer:	It should as long as you can get the jaws on the bolt/stud.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Highlights: tune-up kit model Compatibility: 625E, 675Ex, 725Ex series, 625-675 series & Quantum 3 5-6 75 HP push mower engines Includes: 4-cycle 30W oil 18oz, fuel treatment & stabilizer, air filter, spark plug boxed

• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• Only Briggs & Stratton genuine Parts are specially designed to exact OEM standards, Manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full coverage, always use genuine parts from Briggs & Stratton
• This is an O. E. M. Part
• power source type: self-propelled

User questions & answers

Question:	Does this works for Model #917.370920 Craftsman
Answer:	If your mower mulches, it should.
Question:	I have a toro with a b&s model 286h77 type 0615 e1 code 06011 e2e engine. will this tune up kit work or if not, do you sell one that would
Answer:	No, this kit fits serial numbers ranging from MZCG-6000001 to MZCG-7999999.
Question:	Will this kit fit my Craftsman lawn mower
Answer:	Yes it will fit
Question:	does this will fix on model number
Answer:	I would think it would as it says HRR216 Series. I also typed in your model number and came up with the same item. One of my blades had a little different shape from the original but it works fine. We are already cutting grass in TX.

Product features

Briggs & Stratton Tune-Up Kit

You don’t have to be a mechanic to tune up your own lawn mower at home. In just half an hour and four easy steps, you can tune up your push mower with the help of a Briggs & Stratton engine tune-up kit. There are numerous benefits to tuning up your mower at home, including an easier start, a better run, and reduced emissions (which helps the environment), saving you money on the costly repairs that can result from engine deterioration.

Air Filter Installation Instructions

1. Unscrew and remove cover (A).
2. Remove air filter cartridge and pre-cleaner (B).
3. Install dry pre-cleaner on filter cartridge (C). Do not oil the pre-cleaner.
4. Install air filter assembly on base, then install cover and screw.

1. Unscrew and remove cover (A).
2. Remove air filter cartridge and pre-cleaner (B).
3. Install dry pre-cleaner on filter cartridge (C). Do not oil the pre-cleaner.
4. Install air filter assembly on base, then install cover and screw.

Changing Spark Plugs

1. Remove spark plug by disconnecting the spark plug lead and removing the plug using a spark plug socket.
2. Clean any deposits from the plug with a wire brush or spray-on plug cleaner.
3. Inspect the plug for heavy deposits, cracked porcelain, or burned away electrodes. If any of these exists, replace the spark plug.
4. Use a spark plug gauge to measure the gap between the two electrodes at the tip of your spark plug. (Many small engines require a .030" gap. Check for the specifications for your model)
5. If necessary, use a spark plug gauge to adjust the gap by gently bending the curved electrode. When the gap is correct, the gauge will drag slightly as you pull it through the gap. 
6. Reinstall the plug, taking care not to over-tighten (15 ft. lbs. MAXIMUM ). Then, attach the spark plug lead.

Air Filter Upgrade Instructions

1. Remove and retain screw (A) for later reassembly.
2. Remove and discard the original cover (B), filter (C), filter cup (if equipped), base (D), and gasket (E).
3. Install new gasket on carburetor, then install new base.
4. Saturate new filter in clean engine oil, then squeeze to remove excess oil. Place filter in base.
5. Install cover and secure the air filter assembly to the engine with the original screw.

1. Remove and retain screw (A) for later reassembly.
2. Remove and discard the original cover (B), filter (C), filter cup (if equipped), base (D), and gasket (E).
3. Install new gasket on carburetor, then install new base.
4. Saturate new filter in clean engine oil, then squeeze to remove excess oil. Place filter in base.
5. Install cover and secure the air filter assembly to the engine with the original screw.

Cleaning & Adjusting Small Engine Carburetors

1. Before starting any maintenance, be sure to consult your Briggs & Stratton operator's manual and follow all safety precautions.
2. Clean the main fuel jet (located in your carburetor's fuel bowl nut) with carburetor cleaner and compressed air to blow out loosened debris. 
3. After cleaning the carburetor, another key step for some float-type carburetors is adjusting the idle speed and mixture.

1. Before starting any maintenance, be sure to consult your Briggs & Stratton operator's manual and follow all safety precautions.
2. Clean the main fuel jet (located in your carburetor's fuel bowl nut) with carburetor cleaner and compressed air to blow out loosened debris. 
3. After cleaning the carburetor, another key step for some float-type carburetors is adjusting the idle speed and mixture.

Product description

Genuine replacement carburetor forsingle cylinder engines; This OEM part is used on select 9 cu. in. vertical OHV engines and ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Briggs & Stratton 799584
• Genuine Briggs & Stratton Carburetor
• Fits Most 09P000 Model Briggs & Stratton Engines
• Country Of Origin: United States

User questions & answers

Question:	I have a Sears edger/trencher, engine 140cc engine ser# 15 0615 51 55097 is this the carb for it
Answer:	The length of different sizes is not same. About 1.1 inch long.
Question:	why does the carb dripping gas
Answer:	Yes it will, this product digs into the striped bolt and removes it
Question:	Will this fit model number 247.37010. 9P702 0007F
Answer:	A damaged bolt usually has rounded over heads. As a result, it "shrinks" to the next size down. The answer is "yes" as i just removed a rounded 15mm bolt with the 14mm socket.
Question:	Does this fit the B/S 6.25 ez lawn mower
Answer:	Try this brand of extractor set. MADE IN AMERICA WITH 100% USA STEEL - All RocketSocket impact grade extractor socket sets are designed and manufactured in the USA to meet or exceed all professional tool standards. Don't be fooled by quality claims from cheap "imported" extractor sockets. Trust the original and the best, Trust RocketSocket!

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

This foam element air filter provides superior protection against the destructive effects of dirt ingestion. Used on select 550e-550ex Series engines, this OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Briggs &Amp; Stratton 799579
• Genuine Briggs &Amp; Stratton Air Cleaner Foam Filter
• Fits Most 550E-550Ex Series 09P000, 08P000 Briggs &Amp; Stratton Engines With Foam Filter
• Country Of Origin: United States

User questions & answers

Question:	Can you provide the actual dimensions of the foam
Answer:	This tool is to be use hand tools
Question:	Is this filter in a tune up kit
Answer:	1yr
Question:	Will this fit model number 093j02-0068-F1. Briggs and Stratton lawn mower engine
Answer:	Yes you can but some work required
Question:	Murray 500 Type 1521 for pistol for a push mower
Answer:	I'm assuming that your question is if the plates in this set will crack if you use them with a hydraulic press to push out a wheel bearing instead of the included forcing bolt/nut. If so, no, they won't get damaged. The wheel bearing would probably disintegrate well before the plates crack. The real value of this set is that it could enable one to remove the wheel bearing while the steering knuckle is still on the car (theoretically eliminating the need to get a wheel alignment afterward). Anyway, if you do intend to use a hydraulic press you could probably find a cheaper set of bearing/race drivers which would accomplish the same thing.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations and helps maintain valuable warranty coverage.

Product description

This product is O.E.M. authorized part. OEM Part Number 593261. Fits various Briggs & Stratton models .This product is manufactured in United States.

• This product is O.E.M. authorized part
• OEM Part Number 593261
• Fits various Briggs & Stratton models
• This product is manufactured in United States
• This is a replacement part
• Part Number 593261
• This is an O.E.M. part

User questions & answers

Question:	I have a craftsman 7.25 163cc engine would ot fit
Answer:	As long as your odes 800 uses a M8 x 1.25 x 70m bolt like can ams do
Question:	Is this the correct carb for model 12a-a03z758, i can not find a part number
Answer:	It’s one bolt, there is only one threaded hole on the secondary pulls the other two holes aren’t threaded
Question:	Hello friend i wondering if that part fit we my lawn mover m20300 murray serial
Answer:	From my understanding Can am kept things pretty standard across all platforms with their CVT (sxs & quads). I’ve used this tool on commanders and Mavericks to spread the discs. I have not done a a defender yet but I would say there is a very good chance it will work for you. If you do buy this, make sure to thread it on by hand to make sure it works, do not hammer it on with an impact until you know it works.
Question:	I have a briggs and stratton 300 series push mower. engine model #15-0923-54-65961. is this carburetor compatible
Answer:	I dont see why it wouldnt. I used it on my 2017 outlander 850 and it worked fine. I think as long as if the set up is almost the same to get to the belt change it should be

Product features

Briggs & Stratton Genuine Carburetors

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts assured to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Carburetor Problems

Carburetor problems can be caused by blockage from debris, dirt and gasoline deposits. This will cause the main jet to become clogged and prevent the engine from starting.

Cleaning Your Carburetor

General carburetor maintenance can prevent serious damage from occurring. Using carburetor cleaner and compressed air, any debris can be removed from the main jet. Cleaner will dissolve any deposits in your carburetor and choke.

Removing Your Carburetor

Disconnect the spark plug lead and secure it away from the spark plug. Then, remove the air cleaner assembly. Turn off the fuel valve at the base of the fuel tank. Disconnect the carburetor removing the nuts and sliding the carburetor off the studs.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

This genuine Briggs & Stratton fuel tank cap is for Intek model series 121600 Vertical, 3.5-6.75 HP Vertical Max, Quantum and Europa 625-675 Series and 700-800 Series Engines.

• Briggs & Stratton 692046
• For Intek model series 121600 Vertical
• For 3.5-6.75 HP Vertical Max
• For Quantum and Europa 625-675 series and 700-800 series

User questions & answers

Question:	Need gas cap for a craftsman b&s precision plus gold engine series. 247.37700 or 58052 don't know which one can't find exact #'s that match?? help
Answer:	I'm not sure about such bolt number. Audi/VW is the same design, That lenght will be difficult to work with so search for XZN 100 8 piece "Triple Square" kit
Question:	does this fit Craftsman 917.388660 with 6.5 Briggs & Stratton Engine
Answer:	Yes, this works they didn't change the head bolts through all these years, So It's still same tool same part #, OK good luck !!
Question:	Will this cap fit a toro 20333 self propel system? 7.25 190cc
Answer:	Item Warranty: Lifetime warranty except abuse or neglect
Question:	Will this fit toro 22” recycler model
Answer:	will this work with a 2.0l 6point head bolt 2004 vw jetta

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Keep it Running - Keep it Genuine. Help keep your outdoor power equipment running at peak performance by ordering Briggs & Stratton replacement and maintenance parts. You can find the right part you need including carburetors, air filters, spark plugs, tune-up kits and other engine repair parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

• Briggs & Stratton 699374
• Genuine Briggs & Stratton Fuel Tank Replacement
• New OEM Part
• Replaces Old Briggs # 693377, 495224, 494213, 499618

User questions & answers

Question:	Will this replace b&s part number 490622 on a mtd model number 119-436r
Answer:	Received 5 unmarked filters, not Briggs and Stratton, from my order of 8-15-18, which I returned through Amazon's excellent returns policy. According to B&S, who I called, "all our filters are stamped with our name and product number on the sides".
Question:	will this tank work on Murray500E series push mower 22 in. cut 140cc brigs& straton
Answer:	It’s sae
Question:	Does this replace part
Answer:	Don't know theses things suck anyway
Question:	THe number I pulled off my Briggs and Stratton fuel tank is ybsxs 1901vc 274466. Will this work for my mower
Answer:	There is but not this set

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Keep it Running - Keep it Genuine. Help keep your outdoor power equipment running at peak performance by ordering Briggs & Stratton replacement and maintenance parts. You can find the right part you need including carburetors, air filters, spark plugs, tune-up kits and other engine repair parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

• Briggs & Stratton 692189
• Genuine Briggs & Stratton Grommet Replacement
• Replaces Old Briggs # 67838, 692189

User questions & answers

Question:	Is this the piece that connects to the carburetor
Answer:	to "cbow" and "nikko" and any others who answered "no" to my question.....you are all wrong!!!!!! this filter is a perfect fit for my mower described in my question. glad i checked locally. maybe in the future you could either give accurate answer or no answer at all to a question you don't know the correct answer to.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations and helps maintain valuable warranty coverage.

Product description

Fits Model



128800 122K00 122T00 123K00 124K00 124T00 125K00 126K00 126T00 12F800 12H800 4 Cycle Small Engine



TORO

20066 20067 20068 20090 20090C 20091 20091C 20092 20092C 20093 20093C 20095 20095C 20112 20113 20330 20330C 20331 20331C 20332 20332C 20333 20334 20334C 20350 20351 20352 20655 20656 20658 20792 20793 20795 20817 Walk Behind Lawn Mower

Fit the following Models:

HD725E - 96143008702 (2013-12)

HD725E - 96143008703 (2014-02) 128M02-0122-F4

HU725AWD - 96143010300 (2013-11)

HU725AWD - 96143010301 (2014-04)

HU725AWD - 96145001700 (2013-11)

HU725AWD - 96145001701 (2014-03)

HU725AWD - 96145001702 (2014-04)

HU725AWD - 96145001703 (2015-10)

HU725AWD/BBC - 96143010400 (2013-11)

HU725AWD/BBC - 96143010401 (2014-03)

HU725AWD/BBC - 96143010402 (2014-12)

HU725AWD/BBC - 96145001800 (2014-01)

HU725AWD/BBC - 96145001801 (2014-01)

HU725AWD/BBC - 96145001802 (2015-01)

HU725AWDEX - 96143012001 (2016-07)

HU725AWDH - 96145001901 (2014-12)

HU725AWDH - 96145001902 (2015-11)

HU725AWDHQ - 96145002800 (2015-11)

HU725AWDHQ - 96145002801 (2016-07)

HU725BBC - 96143009400 (2013-02)

HU725BBC - 96143009401 (2013-12)

HU725BBC - 96143009402 (2014-04)

HU725E - 96143009800 (2013-02)

HU725F - 96145001201 (2013-12)

HU725F - 96145001202 (2014-03)

HU725FH - 96145001301 (2013-12)

HU725FH - 96145001302 (2014-03)

• For 790845 799871 799866 796707 794304 Quantum Engine 4 Cycle Mower Lawn Mower Generator Quantum Engine Carb
• Fit BS3.5-6.5 hp quantum engines, 625e 675ex 725ex 625-675 series,124T00 126T00 126M02 124L02 124L05 124L07 124T02 Small Engine,Most 124000 Model Engines
• Fit JD JA60 JA62 JA65 Js20 Js25 Js35 Js26 Js36 Jm26 Jm36 Js28 Js38 JS40 JS45 JS60 JS61 JS63 JS63C JS63E Walk Behind Lawn Mower
• Fit TORO 20066 20067 20068 20090 20090C 20091 20091C 20092 20092C 20093 20093C 20095 20095C 20112 20113 20330 20330C 20331 20331C 20332 20332C 20333 20334 20334C 20350 20351 20352 20655 20656 20658 20792 20793 20795 20817 Walk Behind Lawn Mower
• Package includes 1 carburetor, 1 O-ring, 1 gasket, 1 air filter, 1 pre filter,1 spark plug, 1 fuel filter, 2-feet fuel line,

User questions & answers

Question:	Will this work for B&S 675 model number
Answer:	It should work fine for most all small engines
Question:	gas caps
Answer:	That depends on the specs for your snow blower, check the manual or google the blowers brand and call the company for better info
Question:	I have a craftsman push mower, Briggs and Stratton platinum 7.0 Torque engine 190cc will this fit it
Answer:	Thank you for considering AMC Parts Store for your mower parts.This is a very popular air filter for smaller Briggs engines.However, to be sure, we will need the ENGINE model #, type, and code to research it for you.It may look something like 125K02-0126-01.
Question:	Does this come with the jet bolt that holds the bowl on
Answer:	I just went down in the basement and measured it, and yes, the dimensions are exactly what you said. Good luck!

Product features

Yermax 799866 790845 Carburetor + 491588S Air Filter Tune Up Kit for 675 675ex 725ex Series Engine 799871 796707 794304

Fit models:

BS

128800 122K00 122T00 123K00 124K00 124T00 125K00 126K00 126T00 12F800 12H800 4 Cycle Small Engine

12J902 12J907 122M02 123K05 123K07 123K09 124K02 124L02 124L05 124L07 124T05 124T02 125K05 125K07 125K09 126K02

TORO

20066 20067 20068 20090 20090C 20091 20091C 20092 20092C 20093 20093C 20095 20095C 20112 20113 20330 20330C 20331 20331C 20332 20332C 20333 20334 20334C 20350 20351 20352 20655 20656 20658 20792 20793 20795 20817 Walk Behind Lawn Mower

Deere

JA60 JA62 JA65 Js20 Js25 Js35 Js26 Js36 Jm26 Jm36 Js28 Js38 JS40 JS45 JS60 JS61 JS63 JS63C JS63E Walk Behind Lawn Mower

Fitments of BS Models:

HD725E - 96143008702 (2013-12) HD725E - 96143008703 (2014-02) 128M02-0122-F4 HU725AWD - 96143010300 (2013-11) HU725AWD - 96143010301 (2014-04) HU725AWD - 96145001700 (2013-11) HU725AWD - 96145001701 (2014-03) HU725AWD - 96145001702 (2014-04) HU725AWD - 96145001703 (2015-10)

Fitments of BS Models:

HU725AWD/BBC - 96143010400 (2013-11) HU725AWD/BBC - 96143010401 (2014-03) HU725AWD/BBC - 96143010402 (2014-12) HU725AWD/BBC - 96145001800 (2014-01) HU725AWD/BBC - 96145001801 (2014-01) HU725AWD/BBC - 96145001802 (2015-01) HU725AWDEX - 96143012001 (2016-07) HU725AWDH - 96145001901 (2014-12) HU725AWDH - 96145001902 (2015-11) HU725AWDHQ - 96145002800 (2015-11)

Fitments of BS Models:

HU725AWDHQ - 96145002801 (2016-07) HU725BBC - 96143009400 (2013-02) HU725BBC - 96143009401 (2013-12) HU725BBC - 96143009402 (2014-04) HU725E - 96143009800 (2013-02) HU725F - 96145001201 (2013-12) HU725F - 96145001202 (2014-03) HU725FH - 96145001301 (2013-12) HU725FH - 96145001302 (2014-03)

Product description

Rewind Starter Rope/Grip, For Use With G2757273, 1VN36, 1VN35, 1VN41, 1VN38, 1VN39 and 1VN37 Briggs & Stratton Gasoline Engines

From the Manufacturer

Genuine Briggs & Stratton replacement starter rope with handle. This starter rope with handle will work for most walk-behind mowers.

• Janitorial & Cleaning Supplies
• Country of manufacture: United States
• Manufacturer: BRIGGS & STRATTON

User questions & answers

Question:	Will this work on a Honda lawn mower
Answer:	Yes,this is the right part for that engine on partstree.com parts diagram.
Question:	Will this work on my bolens 125 leaf blower
Answer:	Yes.Parts diagrams are very easy to view at partstree.com.And Amazon will normally check parts fit.
Question:	Will this work for a 4 wheeler
Answer:	For the engine yes.
Question:	Has anybody tried knotting this to original cord? My handle is gone but rope is ok
Answer:	No this is regular oil.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Display pack of 1.6 liter oil extractor pump. Suitable for the extraction of oil fuel from outdoor power equipment, cars, motorcycles, commercial vehicles, marine engines, stationary engines and other machinery.

• Briggs & Stratton 5430K
• Genuine Briggs & Stratton Oil Extractor 1.6L
• Oil Removal For Most 4-Stroke Briggs & Stratton Engines
• Made in China

User questions & answers

Question:	How about transmission fluid on cars.Thanks
Answer:	In my case gas was leaking into and swelling the air filter because of a worn float needle.
Question:	Will this work with the Toro TimeMaster
Answer:	Yes it will.....you will need to remove one of the parts from your old carb and install it to the new one. It's easy to do, and easy to see what it is. It just pulls out. Once you have it out connect it to the governor rod and THEN just snap it on your new carb. There are utube videos that show how to install the carb but most snap the part in place first and then bend the governor rod. It works, but this is the best and correct way
Question:	So does this work for draining oil from a car through the dipstick tube
Answer:	Thank you, Jesus Lujan for your answer. I ordered the carb and it fit perfectly on my Craftsman 6.25 four wheel drive mower. Took 30 minutes to install and much faster and easier than installing a kit to rework the carb.
Question:	Where or what is the hose clip thing the owners manual tells you to clip off the hose after removing from the dipstick tube
Answer:	No it does not

Product features

Step 1: Getting Started

Start the engine and run it until it is warm. Stop the engine. WARNING: Be sure to disconnect the spark plug wire, and secure it away from the spark plug to prevent accidental starting. Clean around the oil fill and drain plug area to prevent dirt and debris from falling into the crankcase (see photo at right). Remove the dipstick, if equipped.

Step 2: Draining The Oil

Remove dipstick, wipe off, and set aside.

Feed hose down dipstick tube until it bottoms out in the sump.

Pump until oil ceases to come through the tube.

Step 3: Engines with Oil Filters

If your engine has an oil filter, replace it at least once per season.

Replace the oil filter by twisting counterclockwise on the body, using a filter wrench or pipe wrench.

Examine the sealing surface on the oil filter adapter for debris or gasket material.

Lightly oil the filter gasket with clean engine oil. Install a new filter, screwing in by hand until the gasket contacts the filter adapter (see photo at right). Tighten the filter an additional 1/2 to 3/4 turn.

Step 4: Fill With New Oil

Pour in the correct amount and approved type of oil for your engine, based on this oil capacity chart , or your operator manual. If you have two oil fill plugs (normally yellow or white in color) on each side of the engine, either one can be used to fill the engine with oil to the correct level. Please do not fill the engine with oil without using the correct measuring device as illustrated in your operator’s manual.

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty Certified oils for best performance. Other high-quality detergent oils are acceptable if classified for service SF, SG, SH, SJ or higher. Do not use special additives.

Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best viscosity for the outdoor temperature range expected. Engines on most outdoor power equipment operate well with 5W30 Synthetic oil. For equipment operated in hot temperatures, Vanguard 15W50 Synthetic oil provides the best protection.

Product description

Genuine Briggs & Stratton replacement part for small gasoline engines. This OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Briggs & Stratton 799585
• Genuine Briggs & Stratton Fuel Tank Cap
• For use with 550e & 550ex Series, 625e, 675ex & 725ex Series and Professional Series 7.75-8.75 Engines
• Replaces Old Briggs # 799684

User questions & answers

Question:	Will it fit 500E series
Answer:	The filter I bought was separate. I do not know if there is one in a tune up kit.
Question:	Will this work on the 500 series? Model # 09P702-0149-F
Answer:	yes
Question:	Will this work on a Briggs and Stratton 140cc
Answer:	I don't understand the question.
Question:	I have a troy build mower, model tb110, will this cap fit
Answer:	probably not Is it a Briggs & Strantton engine >? or a Craftman engine ? these carbs are usually found on B&S engines If you can get me the model of the edger it should be on a tag three numbers followed by a dot then more numbers I can look it up and tell you the exact carburator you need

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations and helps maintain valuable warranty coverage.