12 best pioneer 5 channel amplifiers

Product description

Drive up your music vibes with the Planet Audio Anarchy AC1800.5 5-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 1800 Watts Max Power with a MOSFET power supply for clean, strong sound. Customize the sound with Variable Low and High Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Revolutionize your audio experience with the Planet Audio AC1800.5.



For more product details, please scroll down.

• Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
• Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

User questions & answers

Question:	My receiver has 4 RCA outputs. Can I run the 4 RCA outputs into this amp and run 4 coaxial speakers plus a subwoofer
Answer:	Yes you can. There is a switch on the amp and it will take the sound from channels 3 and 4, and use it for the subwoofer.. so you dont need a 5th rca cable.
Question:	What is the RMS
Answer:	Taken from Google: RMS stands for root mean squared.You use RMS to tell you in part how loud the speakers are going to be, you also you its sensitivity rating.RMS also tells you the most amount of watts that you speaker can handle on a continuous basis. This is the figure you use when looking for an amplifier and powering the speaker.1000w RMS is a lot and i would be very skeptical buying any speaker that says it handles 1000w RMS, most companies that put out a speaker like that inflate their numbers by making the THD level higher so once you turn it up the signal is not clear. Also they will make it 1000w RMS but its sensitivity rating is very low such as under 80db/1w.i know i have two JL subs that are rated at 300 watts RMS each and the 600 watts it puts out is enough to make me go deaf.
Question:	I have a kicker 10" sub with 4 ohms, but when I hook it up to the amp I get absolutely no sound out of it. The first four channels are running fine
Answer:	There is a switch near the sub control on the amp.. direct or channel 3-4. If you do not have a sub input the switch should be set to 3-4. So it will get the sound from channels 3-4. . Hope this helped
Question:	Will this amp be suitable for 2 pairs of Pioneer TS-A6885R Speakers 350W (60W) nominal and TS-SWX251 Subwoofer Power(Nominal)800 W (200 W
Answer:	It is extremely important to understand Ohms law when choosing speakers. One answer on another question says it is not 2 Ohm stable. They wouldn't make the UL list if it didn't. The fifth channel is 1 channel that is 2 Ohm stable. It can handle 2 single voice coil subs wired in parralel which brings the Ohms down to 2 Ohms. I do not recommend DVC in a mono amp unless the amp is 1 Ohm Stable. If you got 2 DVC subs wired parralel would present a 1 Ohm load to your amp and blow it up.

Product description

Pioneer GM-A4704 4-Channel Bridgeable Amplifier, Black/red. Low-Pass Crossover Frequency = 80 hertz ,High-Pass Crossover Frequency =40-500 hertz.

• 520 Watts Max Power
• Automatic signal sensing and Turn-On
• Variable high pass filter
• Speaker level inputs

User questions & answers

Question:	Does this amp have a remote volume control? Not a remote level, but a remote volume control
Answer:	Little, yes. A lot no. I had it on a wooden panel behind my rear seat with my sub box less that a foot away. When I turned up my sub it cut out. Could be due to vibration, not 100% sure. Sub was not powered by this amp.
Question:	How many watts is the amplifier? And will it be good to power 1 10" subwoofer and 2 6x9s
Answer:	100w x 4 channel 4ohm load
Question:	Es para bocinas o para bajos
Answer:	I would never recommend using a 4 channel bridgeable amp to push 2 subs, you would under power them. I would suggest buying a mono amp that can push 100-150 percent RMS per sub!
Question:	What is the rms per channel also would it power four 6x
Answer:	Yes, you will need the line out converter so the amp can have the musical signal.

Product features

Pioneer GM-A4704 4-Channel Bridgeable Amplifier,Black/red

• 520 Watts Max Power
• Automatic signal sensing and Turn-ON
• Variable high pass filter
• Speaker level inputs

Product description

Pioneer GM-A3702 2-Channel Bridgeable Amplifier , Black/red. Low-Pass Crossover Frequency = 80 hertz.

• 500 Watts Max Power
• Automatic signal sensing and Turn-On
• Hi-Volt input level control
• Balanced isolator input circuit

User questions & answers

Question:	Will this work for (2) 10 inch rocford fosgate subs
Answer:	They are over the ear they are very comfortable.This Bluetooth headphones are equipped with Upgraded Soft Ear Cushions, which not only make it much more durability and comfort, but also make customers enjoy this high-quality.Value for money！
Question:	using an ipod nano as the input to this amp, will it turn on automatically and will it function properly
Answer:	Yes, you can. I bought a blutooth adapter it came with a usb connection and i all i needed to do was buy a ananlog wire plug it into my samsung and then once the transmitter connects to the headphones your good to go.
Question:	Will this work for two 8in pioneer shallow mount subs
Answer:	Good. These are not expensive headphones, so they good for the price.
Question:	What amp would be best for mtx terminator
Answer:	Yes, it can be used by a child.

Product features

Pioneer GM-A3702 2-Channel Bridgeable Amplifier ,Black/red

Technology of the GM Series

From dramatic distinction to dramatic design, Pioneer's new GM-Series amplifiers are thrillers in every sense, pushing the limits of flexibility and functionality.

Growing Power, Shrinking Size

New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient size for flexibility of installation in various car cabins.

Automatic Signal Sensing and Turn-On

Pioneer amplifiers automatically select the proper input signal mode, either RCA or speaker level. When the receiver is turned on, the amplifier automatically turns on. When connected to an OEM receiver or a receiver without RCA output and utilizing speaker level output, the amp automatically senses the input mode and powers up in sync with the receiver.

When connected to an OEM receiver or a receiver without RCA output using speaker wire, the amplifier is turned on at the same time as the receiver. Pioneer's amplifiers automatically detect the input signal and select RCA level or speaker level.

Product description

An amplifier shouldn’t take up too much space, especially in your car. The GM-D8704 might just be what you’re looking for. It combines a 1-Ohm stable circuit, installation flexibility and a superior high-power output. Pioneer’s new extra-efficient Class-D digital amplifiers mark a dramatic improvement in power output capability, yet are 50% smaller than the current GM-Series Class-AB amplifiers. That makes them more versatile in terms of installation as well as performance. To prevent circuit shutdown, Pioneer’s new digital amplifier circuit “Protection Control System” senses its internal temperature and automatically moderates input level accordingly. Stable, durable circuitry lessens the risk of high input power for the unit to achieve 1 Ω connection. This design enhances the flexibility to connect multiple subwoofers to a system. For extra flexibility, variable LPF and HPF make audio frequency more adjustable according to subwoofer characteristics and personal listening preferences. The GM-D8704 LPF and HPF are adjustable from 40 Hz to 500 Hz. What, you DON’T own a Pioneer head unit? Well, we won’t hold it against you. In fact we’ll even help you build onto your system. The GM-D8704’s speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle.

• 1, 200 Watts Max Power
• Compact Design for Versatile Installation Options
• Refined Class FD Design Offers Extreme Efficiency and High-Quality Sound

User questions & answers

Question:	Can I use the rca to connect another amp to this one? Since it says bridged
Answer:	At least 4 gauge. The amp does about 900 watts at 2 ohms.
Question:	Ok with some vibration
Answer:	Prime is the low quality version. Id say this one is better.
Question:	What is the exact RMS @ 4ohms
Answer:	Same amp but the champion is the older version
Question:	Will this push 2 planet audio 1800 watt
Answer:	If you bridge the amp to a using two channels, I think this would do you fine.

Product description

The Scar Audio SK-M9005D full-range five channel amplifier offers high performance from an ultra-compact chassis. This Class D amplifier uses less power, takes up less space, and generates less heat than traditional amp designs, making it the perfect solution when space is at a premium and sound quality is the ultimate goal. Don't let its size fool you, the SK-M9005D boasts an impressive 900 Watts of RMS power output (continuous), providing the versatility to power multiple sets of speakers as well as a subwoofer in your system. The SK-M9005D provides you with the tone controls you need to tune your system so that your speakers and sub sound their best. Utilizing the high-pass filters, you can remove the extreme low bass from your full-range speakers, so they'll play more efficiently. You can adjust the subwoofer channel's low-pass filter and bass boost to get just the right bass tone. This five channel amplifier comes with a remote bass knob and cable, providing the ability to control the bass from the dash. In addition, the SK-M9005D utilizes an adapter harness for the speaker outputs allowing for an easier installation. Utilizes 8 Gauge Power and Ground Input Terminals. RMS Power @ 2 Ohms: 85 Watts x 4 + 450 Watts x 1 (14. 4v), Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5, Crossover Control: HPF / Full-Range / LPF. 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC), Remote Bass Knob and Cable Included. Amplifier's Physical Dimensions: 12. 4 in x 4. 6 in x 1. 7 in (L x W x H)

• Ultra Compact MOSFET 5-Channel Class D Car Amplifier
• RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
• Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
• Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
• Remote Bass Knob/Cable and Speaker Output Adapter Harness Included

User questions & answers

Question:	How's this for an infinity based sq setup? plan on getting kappa i plan on getting kappa 6x8's and a pair of low-profile 10-12" reference subs
Answer:	Yes you can if you seperate the wire down to 1 wire. Dont double twist them.
Question:	What is the continues power out the sub channel
Answer:	No, it is not ofc (oxygen free copper) it is the cheaper CCA (coper clad aluminum) if your pushing any really power I would advise getting a OFC kit
Question:	can I strap another amp to my room 4500 and run 2 6.5 inch subs off that if so which amp they are Skar Audio woofers
Answer:	Just like the picture. Power and ground have ring terminals on one side only.
Question:	When using hpf mode does that only filter channels 1-4 to block low frequencies, and leave channel 5 to have its 10-500hz full range still
Answer:	It will fit

Product description

Power Acoustik RE5-3000D 3000 Watt 5-Channel Car Amplifier

• Features: Power Acoustik RE5-3000D 3000 Watt 5-Channel Car Amplifier. 5 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 3000 Watts
• 4 Ohm RMS: 100 Watts x 4 + 350 Watts x 1. 2 Ohm RMS: 150 Watts x 4 + 500 Watts x 1. 4 Ohm RMS Bridged: 300W x 2 + 500 Watts x 1. Direct Short, Thermal, & Overload Circuits Protection
• 200mV-6V High Level or Low Level RCA Input. Tri-Mode Capable. Variable 12dB High, Low, & Subsonic Crossovers. Variable 12dB Band-Pass Crossovers. Direct Wire 4ga. Power & 12ga Speaker Terminals
• Dash Mounted Remote Gain Control. Product Dimensions (L x W x H): 15" x 8.5" x 2.2" inches

User questions & answers

Question:	What is the signal to noise ratio of this amp
Answer:	Yes

Product description

4-Channel bridgeable amplifier with bass boost 1000 Watts Max power automatic signal sensing and turn-on variable high pass filter adjustable bass boost

• 1000 watts Max power
• Automatic signal Sensing and turn-on
• Variable high Pass filter adjustable bass Boost

User questions & answers

Question:	Will this amp run two pioneer 8" pro
Answer:	I've been running 1 Solo-Baric L7 15 (duel 4 ohm voice coils ran in parallel making it 1 ohm) at 1 ohm for 3 years now on one of these amps and it's been working just fine. Thing hits hard makes the roof of my FJ cruiser flex about a half inch.
Question:	What is the rms power rating at 4 ohms x 4 channels
Answer:	I think you are looking for the pioneer gm- 9605. 4 full range channels +1 for a sub.
Question:	Will this run a 12 inch sub
Answer:	Powerbass ASABASS Optional Remote Bass Knob (Discontinued by Manufacturer) https://www.amazon.com/dp/B007BPR7EY/ref=cm_sw_r_cp_api_CO6Eyb5AS53A7
Question:	Will it push
Answer:	That's actually what I'm using it on. I have two 10 inch P1s and it works well. Both my subs are on a single input and if i try to bridge them, it cuts out so i just use a single channel and it sounds good.

Product description

1800W peak (760W RMS) Club Series 5-channel amplifier

• 45 watts RMS x 4 + 320 watts x 1 @ 4 ohms
• 65 watts RMS x 4 @ 2 ohms + 500 watts x 1
• 130 watts RMS bridged x 2 @ 4 ohm
• Total peak power: 1800 watts
• Slim chassis provides more flexible mounting options

User questions & answers

Question:	Does anybody know if the center panel can be flipped? I need to mount the amp to a wall and need the wires coming in the top
Answer:	It’s compatible in any 2din slot. You just have to buy the adapter kit at any Walmart.
Question:	Is amp recommend for... 2 pair kicker component 6.75 300w(100rms) and one sub rw10ca 800w(200rms
Answer:	I had to buy the istalation kit as well as the stereo
Question:	Would this be enough to run jbl gto (2) 6x9 (2) 4x6 and
Answer:	IDK the answer, I purchased as a gift for this past Christmas. They haven't installed it yet. I did see that you can control them with an app from your phone, as long as you are somewhere with a signal. Sorry I couldn't be more help.
Question:	can i use it in my utv
Answer:	Yes it does!

Product description

There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

Overview

Class-D Performance

PDX Technology Inside

Rotatable Illuminated Alpine Badge

Top-Side Control Panel

Voltage ON/OFF Sensing for OEM Upgrade

Built-in Crossover & Bass EQ

Remote Bass (RUX-KNOB) Compatible

Sound Quality

CEA-2006 Power Ratings

CEA-2006 Power Rating: 75W RMS x 4 + 250W RMS x 1 (4-ohm, 14.4V at Less Than 1% THD+N)

RMS Power Ratings

Per channel into 4 Ohms: 75W RMS x 4 + 250W RMS x 1 (14.4V at Less Than 1% THD+N)

Per channel into 2 Ohms: 100W RMS x 4 + 350W RMS x 1 (14.4V at Less Than 1% THD+N)

Bridged 4 Ohms: 200W RMS x 2 (CH-1/2/3/4, 14.4V at Less Than 1% THD+N)

Sound Tuning

Crossover Frequency (CH1/2/3/4, HPF): 50 Hz - 400 Hz, -12 dB/oct.

Crossover Frequency (Subwoofer, LPF): 50 Hz - 400 Hz, -24 dB/oct.

Subsonic Filter (Subwoofer): 8 Hz -40 Hz, -24dB/oct. (Variable)

BASS EQ (Subwoofer): 0 to +12 dB, fc=50Hz (Variable)

Dimensions

Foot Print (WxHxD) mm: 270 x 50.8 x 165 mm

Foot Print (WxHxD) in: 10-3/4" x 2" x 6-1/2"

General

Power Requirements: 14.4 V.DC (11-16V allowable)

Input Impedance: >10k ohms

Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 8 Hz - 45k Hz

Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 8 Hz - 400 Hz

THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02 %

THD+N (10W into 4 Ohms) for Subwoofer: 0.02 %

Damping Factor for CH-1/2/3/4: >500

Damping Factor for Subwoofer: >1000

Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 105 dB

Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110 dB

Weight: 2.76 kg/6lb 1.4oz

Input Sensitivity (RCA Input,CH-1/2/3/4): 0.2 - 4.0 V

Input Sensitivity (RCA Input, Subwoofer): 0.1 - 4.0 V

• PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
• Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
• Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
• All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
• PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally

User questions & answers

Question:	Will this power 2 5-way pioneer 6x9,2-8'mid-bass n 2 8- kicker flat subs. If not please help me
Answer:	This comforter is puffy; upon opening the package just fluff a bit.
Question:	Is Amazon part of Alpine's authorized dealer network
Answer:	This is light weight
Question:	Does this come with the bass knob? Listing seems to infer that
Answer:	Amazon doesn’t give the dimension for this one. I don’t see.
Question:	Can i bridge this to be a 3 channel amp? 2 channels plus the sub for the 3rd channel
Answer:	I have never had a problem with feathers coming out of the comforter.

Product description

GM Digital Series Class D Monoblock Amplifier w/ Wired Bass Boost Remote RMS Power Rating: 4 ohms: 500 watts x 1 chan. 2 ohms: 800 watts x 1 chan. 1 ohm: 1200 watts x 1 chan. Max power output: 2400 watts x 1 chan. Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on Mono channel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals Variable low-pass filter (40-240 Hz, 24 dB/octave) CEA-2006 compliant amplifier Frequency response: 10-240 Hz

• RMS Power Rating: 4 ohms: 500 watts x 1 chan. / 2 ohms: 800 watts x 1 chan. / 1 ohm: 1200 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation Nickel-plated RCA level inputs Nickel-plated screw terminals
• Variable low-pass filter (40-240 Hz, 24 dB/octave) / Frequency response: 10-240 Hz / Dimensions: 12-3/8"W x 7-7/8"D x 2-3/8"H

User questions & answers

Question:	Would this amp work for my 2 10" kicker comp rt subwoofers they are 1ohm 400rms each 800 watts
Answer:	No
Question:	Would this work for 2 12 inche kicker comps and the subs are 2ohm
Answer:	Works fine for my two 10 inch Rockford Fosgate subs.
Question:	Would it work with 2 fronts 2 rear and 1 sub
Answer:	I have the pioneer 1000watt that works good with my terminator 12s.
Question:	What the bass knob that comes with it? I lost mine and want to buy another one
Answer:	Micro USB either on a charger or the computer. Fast charging and long lasting charge.

Product features

Sleek Design

Although your amp is likely to be concealed in your vehicle, Pioneer Electronics has done a phenomenal job in the design and look of this extremely powerful yet small and compact amplifier.

Closer Look

This is a closer look at the channels and inputs the Pioneer GM-D9701 amplifier provides.

Bass Knob

A Bass knob is provided for added control of your bass from the convenience of your driver seat, or anywhere in the vehicle you'd like!

Product description

Rubicon amplifiers are all new. We adopted the optimum class D performance, reliability, and footprint of the Picasso Nano platform and present to you Rubicon Nano. At first glance, you'll notice several key improvements. Rubicon Nano's signal inputs, power/ground, and speaker connections are all re-located to the leading edge of the chassis, for an easier, more appealing install. All pre-amp & crossover options are conveniently located on the top surface, making adjustment after installation possible. What you might not notice are additions to the circuit board, including increased power supply & output stage components, & monoblock bridging capability.

• High Efficiency Class D Full Range Amplifiers
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged Class D Full Range
• Monoblock Bridging Capability for Double Amplifier Application
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

User questions & answers

Question:	What are the rms wattage rating for all 5 channels? 2 ohm and 4 ohm? didn't see them listed
Answer:	4 ohms: 75 x 4 channels + 300 x 1(sub) 2 ohms: 100 x 4 channels + 500 x 1(sub)
Question:	Can this amplifier run 4subwoffers
Answer:	I wouldn't. It's only rated at 500 watts on the mono channel. I have it pushing an sa10 in my wife's car. Plus all four door speakers.
Question:	Does this sale come with a dash Mount gain control
Answer:	Yes it does come with it...
Question:	How many watts on the sub channel
Answer:	Wattage for the Sub channel is 300w 4 ohm & 500w 2 ohm.

Product description

4-Channel Bridgeable Amplifier with Bass Boost. New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins.

• 1000 Watts Max Power
• Automatic signal sensing and Turn-On
• Variable high pass filter
• Adjustable bass boost

User questions & answers

Question:	Will this amp power two Pyle 8inch 1600 watt max 800 rms
Answer:	Yes you can. This would require some wire splicing, a higher gauge wiring for power, and probably a larger battery to ensure peak performance within your car. You will also need to tune them so that they don't interfere with one another (more info can be found on YouTube).
Question:	I want to use this for 4 coaxial this should be fine if the speakers at 50 watts rms more or less in the rms range of the speakers
Answer:	I would hope you would have it answered by now. If not, yellow is your power, black is your ground and blue is your remote turn on. If you still need technical assistance the two RCA amp pre outs. The red and the white. Red is your right and white is usually your left.
Question:	I have a pioneer headunit avh-x1500. i have door speakers in both front and rear doors. will this bypass the eq on headunit
Answer:	Other than your power, ground having enough power needed, you can split the signal and audio wires. Not sure if you can run just one "bass knob" by splitting it, may have to have two of those mounted. Give it a try and let us know.
Question:	Will this work on a single pioneer ts-w126m
Answer:	Install depends on your level of experience, but would be considered basic. You need an amp kit to install it. Because you initiated the question, I can offer you a very aggressive price on this unit. Simply text me at 512-750-8726 for a quote. Thanks!!