10 best coax cable amplifiers

Coax cable amplifiers, also known as signal amplifiers or cable amplifiers, are electronic devices designed to boost the strength of television signals transmitted through coaxial cables. They play a crucial role in improving the quality of television reception, particularly in areas with weak or degraded signals.

Here are some key points about coax cable amplifiers:

  1. Signal Enhancement: The primary function of a coax cable amplifier is to increase the strength of the TV signal.This helps in reducing signal loss over long cable runs or due to interference from obstacles.

  2. Application: Coax cable amplifiers are commonly used in various contexts, including cable TV setups, over-the-air (OTA) TV antenna installations, and satellite TV systems. They are particularly useful in situations where the signal needs to be distributed to multiple devices or over a large area.

  3. Types of Amplifiers:

    • Distribution Amplifiers: These are designed to distribute a signal to multiple devices or TV sets. They typically have multiple output ports.
    • Drop Amplifiers: These are used to compensate for signal loss in the cable from an antenna to a single TV.

  4. Frequency Range: Coax cable amplifiers are designed to operate within specific frequency ranges. It's important to select an amplifier that is compatible with the frequency range of the incoming signal.

  5. Gain: The gain of an amplifier is a measure of how much it increases the strength of the signal. Different amplifiers have different levels of gain, and it's important to choose one that matches the specific needs of the installation.

  6. Noise Figure: This is a measure of how much the amplifier contributes to the overall noise in the signal. Lower noise figures indicate better performance.

  7. Installation: Coax cable amplifiers are typically installed in-line with the coaxial cable. They should be placed strategically to maximize signal quality. It's important to follow the manufacturer's instructions for proper installation.

  8. Power Source: Some amplifiers require a power source, which is often supplied through a separate power inserter or via a USB connection.

  9. Compatibility: When choosing a coax cable amplifier, it's important to ensure that it is compatible with the specific type of signal being used (e.g., analog or digital), as well as the type of cable being used.

Overall, coax cable amplifiers are valuable tools for enhancing TV signal quality and ensuring a clear and reliable viewing experience. They are a crucial component in many home entertainment setups, especially in areas where signal strength may be a concern.

Below you can find our editor's choice of the best coax cable amplifiers on the market
  

Arris 4-Port Cable, Modem, TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Active Return And Coax Cable Package - cableTVamps

Based on 131 reviews Check latest price

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-AR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-AR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. An Active Return Path is provided for continuity. The BDA-42-4-AR-R is and upgrade and replaces the former K-4 1-Port Signal Amplifier. The BDA-42-4-AR-R is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. Active return may not fix all of your problems if the product is not installed properly - or if the incoming cable signal is not problematic. Includes Coax Cable And Detailed Installation Instructions

  • The BDA-42-4-AR-R is a bi-directional active return cable TV amplifier designed for use in homes. Boosts signal by 5x forward, 2x reverse. It is Manufactured by Arris.
  • An active return path boosts upstream signal for broadband devices such as set-top boxes and cable modems. Active return is recommended when Upstream Modem power level is greater than 48 dBmV.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH ANTENNAS. Active return amplifiers should not be used with antennas, and may cause total loss of OTA signals.

User questions & answers

Question: Is this product ok for installation in a warm attic (phoenix, az)? is there an operating room temperature range
Answer: There are four connectors on the device (all coaxial rf f type ) . 1 for power, 1 for the input and the advertised 2 outputs. Essentially this is an amplified splitter with 2 outputs.
Question: Will this increase my internet download speed if I connect the coaxial from my inside wall to this device, then connect this directly to my modem
Answer: Not sure you’ll have to try beginning and end to see which works better. I have mine at beginning of long run. But I’m not a cable expert.
Question: Does it act like a splitter
Answer: Yes, or you could simply purchase the 4-port model, which is a bit cleaner.
Question: Will this help improve my signal on a channel master cm-2016 high vhf,uhf & hdtv outdoor hd antenna to boost my signal and run 3 tvs
Answer: Yes, since it is consuming power it will generate some heat and become warm to the touch. It can be used in hot environments up to + 60 degrees C.

Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package - cableTVamps

Reliable Cable Products

Based on 102 reviews Check latest price

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

  • The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
  • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question: Can just help with poor internet signal
Answer: Sorry, If dvd player attached to Surround AV Receiver
Question: It does work analog and digital antenna
Answer: No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv.
Question: will this work with my outdoor digital antenna
Answer: Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review
Question: I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me
Answer: If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future.

Arris 1-Port Cable, Modem, TV, OTA, HDTV Amplifier Signal Booster with Passive Return and Coax Cable Kit

Based on 57 reviews Check latest price

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-1-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifier will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-1 Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

  • The BDA-42-1-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 32x in the forward path
  • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
  • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" connection cable included.
  • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question: Is this amplifier compatable with cable internet service
Answer: I don’t know. It’s purpose is to boost the signal at the point of contact. So when the cable enters the amplifier the signal can travel further distance before arriving at the TV without loss of signal strength
Question: Does this boost your return signal
Answer: Passive Return = no return boost.
Question: Im not getting my sattelite to work through our camper hook up for sattelite...will this get my signal to recieve so i dont have to run cable inside t
Answer: I'M NOT SURE. I HAVE THIS UNIT CONNECTED TO AN OUT DOOR TV ANTENNA. WORKS WELL AS LONG AS THE ANTENNA IS IN THE RIGHT LOCATION TO RECIEVE THE TV SIGNALS.
Question: What is the gain in db, of this unit. I have a 15db amplifier now and I need a bit more
Answer: 10-15 dB gain depends upon the frequency range.

4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Coax Cable, F59 Terminators (Antronix MRA4-8)

Based on 204 reviews Check latest price

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" coaxial cable and two 75-ohm port terminators.

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

User questions & answers

Question: What is an arpi2000 power inserter
Answer: A way to power the amp, but since this package comes with a DC power supply, and has a place to connect the supply with the provided cable, you don't need a power inserter.
Question: The install mentions a grounding wire. Does this device need to be grounded to work? Thanks
Answer: Grounding is recommended. Grounding can protect the device from surges or perhaps lightning strikes. Consult with an electrician for proper means of grounding.
Question: Will this work to boost internet signal? i don't have cable tv - our house is about 300 ft from the road and that seems to degrade our internet speed
Answer: If you have cable internet (only) you would like be better off with an "active return " amplifier. The only way to really know that for sure would be to check your cable modem for proper signal levels. I would not buy this if you're specifically trying to boost cable internet.
Question: How long is the power cord
Answer: Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

Amplifier, Cable TV RF Broadband 8dB Gain Four Output 5-1002Mhz w/ Power Adapter

Antronix

Based on 370 reviews Check latest price

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included.
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)
  • 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

User questions & answers

Question: If I have to run 15' of RG6 coax to the power port, will this affect the operation of this unit
Answer: According to data I received on this amp it can be run out to a PA.
Question: Can I split the signal coming out of one output
Answer: You could play a bass through it but it was definitely designed for electric guitar. I believe orange makes bass amps.
Question: Will this work, with a digital tv antenna
Answer: No discreet remote available as far as I know. Your phone or tablet with the Spark app, however, works as a full function remote, controlling and overriding every knob on the amp. The app also gets you over 10,000 downloadable tones. Great amp for practice and small venues. Much more than I expected.
Question: So the adapter plugs into a wall outlet and connects with a coaxial cable to the amplifier and the amplifier connects between an antenna and the TV
Answer: Yep. It’s the same. I had to order this bc they wouldn’t ship to AK.

9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier with Active Return Zero Signal Loss VoIP Telephone Bypass Port and F59 Terminators Antronix VR900B/AC

Reliable Cable Products

Based on 486 reviews Check latest price

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question: May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer: I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question: If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer: this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question: Can this be mounted outdoors
Answer: If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question: Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer: No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

24db Distribution Amplifier - Digital TV Antenna Booster Signal Amplifier, Adjustable Boost/Gain, NTSC, ATSC, FM, UHF, VHF - 1000 MHz - Includes RG6 Coaxial Cable

THE CIMPLE CO

Based on 204 reviews Check latest price

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

  • Comes with an RG6 coax cable to help get you started right away.




    • For Best Results:
  • Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.




    • THE CIMPLE CO
  • All of our high quality products are brought to you by our Family owned and operated company.
  • We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.
  • Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

    • Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
    • Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
    • Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
    • Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
    • Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

    User questions & answers

    Question: Waterproof for outdoor use
    Answer: It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
    Question: what is the adjustable range
    Answer: does not include numbers just bigger or smaller range
    Question: Does the output go to the tv
    Answer: Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
    Question: I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
    Answer: We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.

    Antennas Direct 8-Port TV Distribution Amplifier, Connect up to 8 Televisions to 1 Antenna, Power Supply, Coaxial Cable, For Indoor Use, 4K Ready, Silver - CDA8

    Antennas Direct

    Based on 1 reviews Check latest price

    Product description

    Splitting the signal to more than one TV? The output distribution amplifier will help overcome signal loss. The CDA8 boosts signal to be split to 8 TV's or digital converter box.

    • connect one tv antenna to 8 rooms while boosting signal in each location for reliable reception
    • weatherproof indoor / outdoor housing (power inserter for indoor use only)
    • 4.5db amplification per port
    • includes distribution amplifier, power inserter, 3ft coaxial cable, and instructions
    • 90 day warranty on parts
    • Included components: Output Tv/catv Distribution Amplifier (8 Way)
    • Connector type: F-Connectors

    User questions & answers

    Question: I have an amplified antenna will this further amplify the signal? I'm 80 miles from the source
    Answer: it locks into the hole for the Nintendo DS. I am not sure about the XL, but assume they are the same size in terms of stylus used, so would say yes. We bought the 10 pack as my son tends to lose them so these work great. It hasn't fallen out of the holder once.
    Question: I would like to mount this in the wall with panel over it. Any ideas on how to do this and be in code
    Answer: Hello, this product is only suitable for New 2DS XL.
    Question: What is the "power in/rf out" output used for? It indicates it has 15vdc on it, so I'm wondering if that is harmful to a tv
    Answer: Sorry, this is only for Nintendo 2DS, but we have another set which can be used for DS Lite.
    Question: If I have a pre-amp antenna will this be an overkill
    Answer: I don’t think so but I don’t honestly know we used it for a drawing pad
    Question: What is the length of this charger? is it an authentic nintendo dsi product
    Answer: It does not specify that it will work with the New 2DS XL, but it does work for the Old and New 3DS XL and the Old 2DS. This package of styluses may have been manufactured before the New 2DS XL came out, so some of the styluses may fit it and just not be labeled on the package. Hope this helps.
    Question: will this fit the New Nintendo 3ds XL us version
    Answer: I don’t no the measurements but there the same as the Nintendo ones and fit perfectly. And they are only plastic
    Question: Is the game case and manuals inside included with the game purchase
    Answer: No, they're soft tipped made for pressure sensitive touch screens.
    Question: Does this version include the animated cut scenes by Akira Toriyama that were added in the PS1 re-release of the game
    Answer: works for ds but not fit in the slot
    Question: Is this game backwards compatible with the 3DS
    Answer: Being that I bought them for the ds I really wouldn’t recommend using it on the switch. They sell Switch specific stylus
    Question: Is this game the definitive edition? if not which one is the best ps1, snes or nds
    Answer: Not sure. My little girl used it for her old DS screen and it worked fine on that.

    Product features

    Antennas Direct ClearStream Juice Preamplifier System

    Adding an preamplifier at the TV antenna increases available signal strength. For city, suburban, and rural locations, the Juice Preamplifier System overcomes weak signals and rejects interference from cellular and wireless data services. Use with a 100 ft. or more of coaxial cable from the antenna to the TV and the use of a splitter.

    Antennas Direct PA18 Preamplifier Kit

    The PA18 Preamaplifer is designed for rural TV antenna installations to provide consistent signal performance for reliable picture quality and reception. Use for weak signals, a 100 ft. or more of coaxial cable from the antenna to the TV, and the use of a splitter.

    Antennas Direct 4-Output Distribution Amplifier

    Connect one TV antenna to 4 TVs while boosting signal in each location for clear, consistent picture quality and reception.

    Antennas Direct 8-Output Distribution Amplifier

    Connect one TV antenna to 8 TVs while boosting signal in each location for clear, consistent picture quality and reception.

    Arris 2-Port Cable, Modem, TV, OTA, HDTV Amplifier Splitter Signal Booster with Passive Return and Coax Cable Kit

    Based on 29 reviews Check latest price

    Product description

    There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-2-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifir will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-2 2-Port Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

    • The BDA-42-2-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 12x in the forward path.
    • Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
    • Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable included.
    • NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

    User questions & answers

    Question: Would this work with moca 2.0 bonded devices
    Answer: This doesn't contain a tube power amp. The tubes are only a preamp.
    Question: How do you connect remote power to output 1 with the plug-in power supply included? I would think I need a power inserter
    Answer: Any load from 4 Ohms to 16 Ohms is safe with this amplifier.
    Question: The instructions say to "terminate unused ports with 75ohms for optimum rf performance". what would count as 75ohm terminator and is this a must
    Answer: Amplifiers having fans are built with them for a reason. I wouldn't recommend disconnecting it.
    Question: will this device work with my internet coax cable
    Answer: Yes

    4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Black Coax Power Cable, F59 Terminators (Antronix MRA4-8)

    Check latest price

    Product description

    This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" custom coaxial power cable and two 75-ohm port terminators.

    • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
    • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.
    • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 1 Year Warranty.
    • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
    • Kit includes Amplifier, Power Supply, 36 inch custom super-flexible power cable, and two 75-ohm port terminators. Note: The included cable is for power only, not for cable TV signals.

    Latest Reviews

    View all