13 best cable tv signal boosters

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question:	May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer:	I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question:	If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer:	this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question:	Can this be mounted outdoors
Answer:	If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question:	Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer:	No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Product description

Introducing the Digital Signal Amplifier by THE CIMPLE CO.

This premium distribution amplifier is used to increase the reception of your TV signal from the antenna, without signal degradation or ground loops. The adjustable amplifier was produced and engineered for professional grade performance that supports UHF, VHF, FM, broadband and digital broadcast signals. This includes a high output capability with low distortion, minimal noise production and adjustable gain control. Its design features a heavy duty metal housing with built in coaxial ports, along with a convenient power indicator light. If your Cable TV signal lacks the strength to give your the quality video you deserve, give your signal a boost with this high performance amp.



Added Bonus:

Comes with an RG6 coax cable to help get you started right away.

For Best Results:

Place the distribution amplifier in a central location. Arrange this device so that it is the first on the coax cable coming from the antenna/preamplifier.

THE CIMPLE CO

All of our high quality products are brought to you by our Family owned and operated company.

We are located in Utah, "The Beehive State," here in America; where we have become a leading manufacturer and provider of high quality and durable electronic accessories along with OEM parts and replacements.

Our products are backed by our amazing warranty and a satisfaction guarantee, including 100% US based customer assistance.

• Includes: 1 TV Antenna Distribution Amplifier and 1 RG6 coax cable
• Perfect For: This 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, providing high output capability with minimal distortion
• Features: Heavy duty metal housing, with built-in coaxial mounting ports, a power indicator light, adjustable gain control, and return path
• Versatile: Enjoy the control of variable gain in VHF / UHF / FM bands, ATSC, NTSC, FTA, OTA
• Quality Assurance: This TV amplifier features a high quality, commercial grade build and Includes a US manufacturers warranty

User questions & answers

Question:	Waterproof for outdoor use
Answer:	It doesn’t seem to be waterproof sealed. If you’re going to use it outside I think you should plug it into a GFI outlet
Question:	what is the adjustable range
Answer:	does not include numbers just bigger or smaller range
Question:	Does the output go to the tv
Answer:	Yes, output is to the usual coaxial cable that goes to the TV Antenna connection on the back of the TV. Or in my case to a distribution hub to send the signal to several rooms.
Question:	I run a single tv off of an outdoor antenna, can i place this right at rhe tv or does it need to be a certain distance from the set
Answer:	We have the amplifier right under the wall-mounted TV sitting on the mantle. We haven't tried repositioning it elsewhere. The TV jack and outlet are next to each other. I believe it would depend on where your jack and outlet are located to really determine the distance the amplifier can be placed from the TV.

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

• The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Can just help with poor internet signal
Answer:	Sorry, If dvd player attached to Surround AV Receiver
Question:	It does work analog and digital antenna
Answer:	No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv.
Question:	will this work with my outdoor digital antenna
Answer:	Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review
Question:	I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me
Answer:	If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future.

Product description

IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels, but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers, antenna position, and obstacles, including hills, buildings and trees.

A better signal means better TV with the GE-branded Indoor Antenna Amplifier. Increase your reception quality by strengthening the signal from channels in your area. PureAmp™ Technology features a built-in 4G/5G LTE filter that blocks unwanted cell phone interference and amplifies VHF and UHF broadcast signals for crystal-clear reception of in-range HDTV channels. This low-noise amplifier boosts signal strength to compensate for cable loss and minimizes reception dropouts to strengthen the signal of available channels that your antenna is already receiving. The number of channels and the reception quality will vary based on distance from broadcast towers, antenna position and obstacles, including hills, buildings and trees.

Compatible with all brands, the amplifier easily connects to the coax cable from your antenna and then attaches directly to your TV—twist-on connectors mean no tools are required for installation. This amplifier is perfect for any indoor passive antenna and is powered using the included AC power adapter. Seeing is believing with the GE-branded Indoor Antenna Amplifier.

• SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
• LOW-NOISE AMPLIFICATION – Improves signal-to-noise ratio and compensates for cable loss to offer a superior viewing experience. Improves VHF and UHF reception and boosts signals for digital televisions.
• EASY TO INSTALL – Connect your indoor TV antenna to the amplifier the amplifier to your TV the AC power adapter (included) to a nearby wall outlet and perform a new channel scan. This amplifier is intended for INDOOR USE ONLY.
• IMPORTANT NOTE – Using an amplifier does not guarantee that you will receive more TV channels but it will strengthen the signal of available channels in your area. The number of channels and the reception quality you receive will vary based on distance from broadcast towers antenna position and obstacles including hills buildings and trees.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	how long is the power cord
Answer:	Hello Ermac, thank you for your question. Yes, as long as your Smart Roku TV has a coax port. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Has anyone tried using this to improve picture from an old game console (like an Atari2600 or Intellivision) that uses coax
Answer:	Hi Charles, thank you for your question. The GE UltraPro Traditional Indoor Antenna is rated to work within 30 miles of the broadcast source. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday through Friday at 1-800-654-8483. Thank you
Question:	How much does the amplifier boost the signal
Answer:	This antenna was created to work in a sitting position. However, most other antennas are made to stand up straight. We have not tested the reception from the suggested position. It could work fine but we cannot guarantee that.
Question:	most questions are about the antenna but, how well does the booster work - how many miles does it give, is it better than standard antenna boosters
Answer:	Hello Thomas H. , thank you for your question. The coax is cable is 4ft long.

Product features

GE TV Antenna Amplifier

Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.

1. Connect TV Antenna to the Amplifier

2. Connect Amplifier to TV and AC Power Adapter

3. Perform a New Channel Scan

Add to Your Setup

Complete your overall entertainment setup with the indoor amplifier

• Antenna Amplifier
• TV Antenna (GE #43452 - sold separately)
• Universal Remote (GE 46195 - sold separately)
• Coaxial Cable (GE #33532 - sold separately)

Product description

There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. ARRIS BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-42-1-PR-R where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Arris how can you go wrong? The BDA is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more. THe BDA amplifier will improve your cable TV signal. It will also improve low or marginal HDTV OTA signals in many cases, if the problem is a low or marginal signal. The BDA-42-2-PR-R is an upgrade and replaces the former BDA S-1 Signal Amplifier. Includes coaxial cable and PCT-TT installation tool.

• The BDA-42-1-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 32x in the forward path
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" connection cable included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Is this amplifier compatable with cable internet service
Answer:	I don’t know. It’s purpose is to boost the signal at the point of contact. So when the cable enters the amplifier the signal can travel further distance before arriving at the TV without loss of signal strength
Question:	Does this boost your return signal
Answer:	Passive Return = no return boost.
Question:	Im not getting my sattelite to work through our camper hook up for sattelite...will this get my signal to recieve so i dont have to run cable inside t
Answer:	I'M NOT SURE. I HAVE THIS UNIT CONNECTED TO AN OUT DOOR TV ANTENNA. WORKS WELL AS LONG AS THE ANTENNA IS IN THE RIGHT LOCATION TO RECIEVE THE TV SIGNALS.
Question:	What is the gain in db, of this unit. I have a 15db amplifier now and I need a bit more
Answer:	10-15 dB gain depends upon the frequency range.

Product description

This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA48 provides a minimum of 0dB gain (which means no signal loss) on the low frequency end (54MHz) up to a +7.5db (approximately 5x signal gain) on the high end 1000MHz end. It improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
• Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
• Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

User questions & answers

Question:	What db Noise rating
Answer:	everything makes of noise some we can hear and some our ears are not sensitive enough to hear I believe they are giving you the the noise level that this produces but double check my answer
Question:	I'm not a tech by far so my question is the item has two connectors on the top so is that for a OTA antenna and an internet cable connection
Answer:	No - if you look at the picture, you can see the left connector is for powering the amplifier. the right connector is for signal input. You cannot connect cable and OTA at the same time.
Question:	Does this include the splitter (power injector) to be used with the power in/rf out port
Answer:	The remote power option is not included with this item. You can connect a cable up to 100' from the power supply.
Question:	how does this connect to the power adapter
Answer:	Any length of standard coax cable will work - no longer than 100'. We are working on a new kit with a"super flex" power cable so that you won't have to buy one - but the cables are still in production and won't be available for a while.

• Tv Antenna
• Hdtv Antenna
• Indoor Antenna

User questions & answers

Question:	I have a real old tv. will it work
Answer:	Tests show the Black Berkey filters remove up to 95% of lead and a host of other heavy metals.
Question:	I have an older hitachi big screen tv with coax connection. Will this work for it on it's own or do i need one of those digital boxes also? Thanks
Answer:	There's plastic in it (the screws) so that sets off prop 65. The Plastic itself is safe but in the manufacturing some things are used that aren't. Prop 65 is waay too vast to be useful.
Question:	Can you use this with the fire stick plugged in
Answer:	In an independent test done last year, the Black Berkey filter elements with the PF-2 attachments filtered out the following:Uranium: 100%Lead: 100%Mercury: 99.8%Cesium: 98.6%Aluminum: 86.6%Copper: 100%Arsenic: 100%Strontium: 100%Cadmium: 100%The test they performed in this case was only for heavy metals, so it of course filters out much more than just these things, as shown in other tests. This just highlights the heavy metals. Hope this helps!
Question:	Will it work with a fire stick plugged in
Answer:	It depends on how much water you filter & how many filters you use (2 or 4). Also, normal city water varies due to local water hardness. We fill up the filter 1 to 2 times per day (usually twice) with 4 & change them every 6 months, but if we didn't have kids, our filters would probably last us about twice as long. However, this is still cheaper than other filtering methods we've used & does a much better job.

Product features

NEVER PAY YOUR CABLE or SATELLITE FOR TELEVISION AGAIN - YOU CAN GET ALL LOCAL CHANNELS in CRYSTAL CLEAR HD QUALITY!

Watch over 500,000 movies and TV episodes come to life in vibrant colors and detailed contrast through Our indoor HD Antenna connected directly to your TV. Including local news, weather forecast and sitcoms, kids and sports programs, etc.

No more triple-digit monthly bills! A ONE TIME purchase for less than 30 dollars can save you 80-212 dollars every month, adding up to 960-2544 dollars a year! This innovative Indoor Flat Digital Antenna is worth every cent you pay.

NOTE: BEFORE YOU BUY:

find channels that works in your area:

• dtv gov maps is run by the Consumer Electronics Association and the National Association of Broadcasters.The interface hasn’t changed in over a decade, but it’s simple and the information is useful.
• TVFool is more complex but gives a lot more detail including gorgeous plots of theoretical signal strength and where the broadcast towers are located.

And if you’re looking for a cable-style TV schedule, "TitanTV" is a free Web service that lists local programming.

WATCH WHAT YOU WANT! NOTE:Cable channels are not available using the antenna, like ESPN.

Free Channels for Life!

The HDTV reception ensures that you always have the highest quality content.

Depending on your location, the HDTV antenna can receive include NBC, FOX, CBS, ABC, PBS, THE CW, QUBO, TELEMUNDO, UNIVISION, RTV, THIS TV, ION, ME TV, the weather channels and SO MUCH MORE.

Get access to all the content available in your area, including the most popular over-the-air TV shows, news, sitcoms, kids programs, sports and much more, all in breathtaking 4K Ultra HD for the best picture quality, most vivid colors and stunning sound.

Installs in less than 3 minutes! Just plug into your TV’s coaxial cable port, set your TV to antenna mode and scan for channels!

Our HD Antenna includes an intelligent Integrated Circuit (IC) chip, powerful amplifier signal booster and the most advanced CleanPeak Filter technology to insulate against cellular and FM interference and provide low-noise crystal-clear picture for 200+ miles channel reception!

IMPRESSIVE ENTERTAINMENT

Enjoy stunning HD streaming at up to 60 fps and HDR enabling more vivid, lifelike colors and exceptional clarity. Feel scenes come to life with three-dimensional Dolby Atmos audio when connected to compatible home audio systems.

LATEST AMPLIFIER SIGNAL BOOSTER

Our smart tv antenna adopts upgraded with new type Smart Switch control Powerful Amplifier Signal Booster with built-in Smart IC Chip Next generation & Crystal Clear Filter Technology to picks up signals within 200 miles range. The new technology filters out cellular and FM signals resulting in clearer picture, low noise and access to more free broadcast TV signals with enhanced gain, range and frequency performance.

AVOID OBSTACLES

The actual receivable range may highly dependents on your distance and location. Areas with large obstructions such as valleys, mountains, etc, will reduce effective range. Always re-scan channels after moving the hdtv antenna, the result may be better.

NOTE: Please switch the amplifier to "short range" if your house is very closer to the broadcast tower (within 35 Miles).

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+7dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. Coaxial cables are not included.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only)
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.

User questions & answers

Question:	If I have to run 15' of RG6 coax to the power port, will this affect the operation of this unit
Answer:	According to data I received on this amp it can be run out to a PA.
Question:	Can I split the signal coming out of one output
Answer:	You could play a bass through it but it was definitely designed for electric guitar. I believe orange makes bass amps.
Question:	Will this work, with a digital tv antenna
Answer:	No discreet remote available as far as I know. Your phone or tablet with the Spark app, however, works as a full function remote, controlling and overriding every knob on the amp. The app also gets you over 10,000 downloadable tones. Great amp for practice and small venues. Much more than I expected.
Question:	So the adapter plugs into a wall outlet and connects with a coaxial cable to the amplifier and the amplifier connects between an antenna and the TV
Answer:	Yep. It’s the same. I had to order this bc they wouldn’t ship to AK.

Product description

This is a brand new, four port cable television drop amplifier, just like the ones that your local cable company uses to correct their system's shortcomings. It boosts signal strength by more than 5x (+8dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of TV pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! The latest Antronix MicroAmp provides exceptional home signal amplification in a small convenient package. Our patented CamPort provides the only auto-seizing F-port for maximum contact area and reliability for multimedia applications. Ideal for both indoor and outdoor applications, the MRA was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges. Includes Amplifier, Power Supply, 36" coaxial cable and two 75-ohm port terminators.

• Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards.
• 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 5 Year Warranty (amplifier only).
• 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters. 6 kV Combination Wave Surge Protection Unique surge protection on all ports.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

User questions & answers

Question:	What is an arpi2000 power inserter
Answer:	A way to power the amp, but since this package comes with a DC power supply, and has a place to connect the supply with the provided cable, you don't need a power inserter.
Question:	The install mentions a grounding wire. Does this device need to be grounded to work? Thanks
Answer:	Grounding is recommended. Grounding can protect the device from surges or perhaps lightning strikes. Consult with an electrician for proper means of grounding.
Question:	Will this work to boost internet signal? i don't have cable tv - our house is about 300 ft from the road and that seems to degrade our internet speed
Answer:	If you have cable internet (only) you would like be better off with an "active return " amplifier. The only way to really know that for sure would be to check your cable modem for proper signal levels. I would not buy this if you're specifically trying to boost cable internet.
Question:	How long is the power cord
Answer:	Includes Amplifier, Power Supply, 36 inch coaxial cable and two 75-ohm port terminators.

Product description

This is a brand new, four port cable television drop amplifier, similar to the products that your local cable company uses to correct their system's shortcomings. The amplifier allows you to connect up to four devices to a single input connection, without losing signal strength like you would with normal splitters. It boosts signal strength in an intelligent manner, by limiting the naturally stronger signals on the low frequency range and boosting the frequencies on the higher end. Since TV signals tend to natually lose strength on the high frequencies faster than the low frequencies, you are less likely to over-amplify your TV signals and cause further problems. The LSA84 provides a gain of +8db (approximately 5x signal gain). Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! The unit can be used with Cable TV, OTA Antennas (Analog or Digital as long as they are non-amplified). This model packs a powerful punch in a compact, easy-to-install package! If you have multiple televisions or run a cable modem for your internet, this product is recommended. By connecting this signal booster to the cable drop coming in from the street, you can increase the signal strength and eliminate the need for additional splitters, which reduce signal strength. If you are tired of tv pictures that don't seem as clear as they should be, dropped internet connections, or just desire a reliable amplifier to give continuous, steady signal to your home or business, this is for you! Ideal for both indoor and outdoor applications, the LSA84 was engineered to withstand the harshest environmental threats with the capability of enduring repeated high power surges.

• This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
• Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
• Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ºC (-40ºF to +140ºF). 15 PSI weather-tight seal.
• Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.

Product description

This amplifier provides 8 ports for multiple TV sets, cable boxes, or cable modems. It boosts signal strength by more than double (+4dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! It is compact and easy to install. Connect to the drop (main line) and eliminate the need for additional splitters, which reduce signal strength. It ships with everything you need to complete the installation, including comprehensive installation notes. The Unit can be used with Cable TV, and OTA Antennas. This amplifier provides the exact specs as other brands that are selling for much higher prices. This amplifier is designed to fit into smaller spaces, while providing the FULL performance of larger sized amplifiers. Includes Power Supply and detailed Installation Instructions.

• Allows you to connect up to eight devices to one cable connection or antenna without losing signal.
• Eight port amplifier with a passive return path provides an increase of +4 dB per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
• PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
• Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. NOT FOR USE WITH SATELLITE SYSTEMS.

Product description

This professional-grade CATV RF signal amplifier helps boost the RF TV signal for analog/digital cable TV, CCTV, SMATV and all other RF modulated TV system with amplification up to 50 dB gain.

This high-gain TV signal booster can be used for full range of TV bands for both UHF/VHF and CATV systems when you have long cable TV runs and multiple splitters used in the setup.

It provides clean, crisp video for large homes or office buildings with long cable runs and many TV outlets where amplifier cascading is required.

Featured with adjustable attenuation to reduce overdriving and adjustable tilt compensation to allow large systems to be properly balanced.

Also served as a great solution for fixing the problems of noise, snowy picture, interference and weakness after distribution for CATV, Digital TV systems and CCTV systems.

High Gain 50dB Boost

This unit is featured with high 50 dB gain for RF input signals to compensate the RF TV signal loss and attenuation after long cable transmission.

Users can easily extend the cable TV signal for another 2100FT or 650 meters if RF TV source signals have fair 70 to 75dB strength to start with.

So more TVs can be added in large office building or home residence.

Easy Gain Control From 0~ -18dB

The variable gain dial on this amplifier provides an adjustable attenuation control for reducing the possibility of over driving.

Proper gain level can greatly enhance the picture quality with minimum noise.

Easy Tilt Control From 0~ -16dB

When installer has a large RF TV system to run or multi-transmission by one coaxial cable, this Slope Control function helps installers balance all cable TV signals to be transmitted at same output amplitude for optimal installation.

-20dB Input/Output Testing Port

A testing port with -20dB input/output is provided for easy trouble shooting.

• Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation.
• High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing.
• Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution.
• Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels.
• Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability.

User questions & answers

Question:	What are the dimensions of this unit
Answer:	If you don’t have a drummer, sure. You could always mic it, otherwise, I’d recommend saving up a couple hundred more dollars for a bigger amp. This is more of a practice amp.
Question:	What is the warranty on the unit
Answer:	I believe the headphone jack can be used for headphones or a speaker output? I would review the specs online type in the exact amp and or try to find an online manual at that will be your best bet. It is a very loud amp even with just the (1) 8" speaker.

Product description

Nippon America's UHF VHF FM Distribution Amplifier is perfect for indoor TV and FM antennas requiring more signal gain. It is suitable for all HDTV television broadcasts, as well as standard and HD FM.



Please Note: This will not boost or improve a bad/weak signal, it is made to compensate for signal loss from splitters and long cable runs.



Pick a spot in your television cable run where you can install the booster. A TV antenna signal booster is installed in-line that is, the cable must connect to the input and output of the booster. If you're only boosting the signal for one television, it's logical to install it near the television. If you're boosting signal for multiple televisions, choose a spot near your antenna line splitter.



Installation Note: TV amplifiers that have a power supply (such as this model) should be installed indoors, or in a location that will not be subject to any moisture. A booster should be installed as close as possible to the antenna, and before any coax cable splitters that may also be used.



NOTE ABOUT USE and POTENTIAL FOR STATION LOSS: A signal amplifier/booster will only improve a signal that is already present. This booster should work for any channel that is used by off-air TV stations. There are always situations where an amplifier does not help. If the station is particularly weak, but there are other very strong channels nearby, even radio stations, such radio station signals may block out other TV stations. This amplifier amplifies everything within the point where a local strong station could create interference that covers up the weak station you are attempting to receive.



If the station is particularly weak, and/or there is a long length of cable, or splitters to other TV’s between the antenna and this amplifier, certain channels may also be lost.

• UHF VHF FM Distribution Amplifier for TV/VCR
• 36dB Gain Control Signal Booster
• FM Trap / On-Off Indicator Light
• 1 Input / 1 Output

User questions & answers

Question:	Can anyone tell me if this diminishes vhf in favor of uhf? [the cda4 channel master does]
Answer:	This type of amplifier will boost EVERYTHING nearly equally -- VHF, FM, UHF, Cellphone "LTE" noise, etc.
Question:	What’s the in- out switch for
Answer:	Following info below is from Amazon's description on their web site. The switch is for the "FM Trap" function. I assume, but do not know, it compensates for FM interference when present. If used the same unit for 25 years and replaced it with the new model last week. It fixed my problem (dead or dying DA) and I am back in business. I have never used the FM Trap. I sometimes had it "IN" and sometimes "OUT" and could never see a difference. Product description Installation steps:1-Connect amplifier as per this diagram. 2-This amplifier can not be used with TiVo. 3-Performance varies from one location to another. 4-Adjusting the gain control clockwise increases your signal strength. 5-In most cases the FM trap should be set to the IN position. ● Switchable FM Trap ● 75 OHM Input ● 75 OHM Output ● 117V Power Source ● Lightning Protection ● Heavy Metal Case ● Low Noise ● Integrated Circuit ● Gain db ● 40 VHF- 36 UHF ● Noise Figure db ● Low 5.4- Hight 6.2-UHF 14 ● FM Trap Attenuation-20 db 95-108 MHz ● Adjustable Gain control Installation instructions: 1.Connect coaxial cable from antenna/ cable to amplifier input. 2.Connect coaxial cable form output to TV set. 3.If connecting more than one TV, use a splitter between amplifier output and TV. 4.Use gain control to increase signal (turn clockwise) or reduce signal (turn counter clockwise). 5.FM trap is used to eliminate FM interference. In most cases slide switch to (IN) position. 6.Red light indicates that the amplifier is plugged into 110 volt outlet. 7.Amplifier performance varies from one location to another. 8.This amplifier generally WILL NOT WORK WITH TIVO. 9.Check the back of amplifier package for specifications and installation diagram. 10. Works with cable modems. 11. Amplifies indoor/outdoor antenna and cable signals for best reception.
Question:	Can you install an amplified 8ch splitter into this? I.e. can you “stack” amplifiers
Answer:	I suppose you could but I wouldn’t. The risk is that the output of the first amplifier would be excessive to the input of the second. These amplifiers are designed for microvolts in and millivolts out. That’s a difference of a thousand times! My question is, Why would you want to if the splitter is already amplified?
Question:	Did you lose any channels before/after this amp
Answer:	My TV has a signal input on it and sometimes I would lose a channel because it was not strong enough. This amp boosted it so that does not happen.