13 best carburator cleaners

Product description

Gumout Carb / Choke and Parts Cleaner quickly removes deposits from the inside and outside of the carburetor to improve engine performance and fuel economy. Over time, carburetors and choke valves can become clogged with gum, varnish, and dirt, affecting performance. Gumout Carb and Choke Cleaner cleans carburetors, linkage, choke valves, and unpainted metal parts to improve performance and reduce emissions.

• Helps overcome hard starting, rough idling, stalling, and high exhaust emissions
• Quickly removes deposits from the inside and outside of the carburetor to improve engine performance and fuel economy
• Cleans gum, varnish, and dirt from clogged carburetors and choke valves
• Effectively cleans unpainted metal parts and is quick drying

User questions & answers

Question:	Can this Gumout clean a throttle body on a 370z
Answer:	Yes
Question:	Can this be used to clean the carb on my torro snowblower that doesn’t start? do i need a purge valve or can i just insert the nozzle and spray it
Answer:	yes you can
Question:	I have push lawn mower that is "surgning and hunting" (rpm go up and then down in cycle). would this product help me
Answer:	It can if you clean the carb. Or your timing could be mess up.
Question:	does it have a straw
Answer:	Yes comes with one taped to the can

Product features

Get Your Engine Performance Back

Carburetor Deposits.

Gum, varnish and contaminants attach to the surfaces of carburetor and associated parts. These soils may interfere with engine performance and should be removed to prevent hard starting, rough idling, stalling and high exhaust emissions and reduction in fuel economy. Gumout’s Jet Spray Carb & Choke cleaner quickly dissolves this build up and dries quickly without leaving residue.

Product description

Berryman Products 0996-ARM B-9 CChem Dip Parts Cleaner with Basket and Arm lock 3/4 Gal Net Pail is a fast-acting immersion cleaner for all metal parts, including alloys. Removes gum, varnish, sludge, carbon, and grease without heat or agitation. It offers a Non-chlorinated and non-flammable formula. It is VOC-compliant in all states. Safe for use on plastic and rubber and will not cause rusting. Use for cleaning carburetor and transmission components, valves, and other small, hard-to-clean engine parts.

• Fast-acting immersion cleaner
• Effective on gum, varnish, sludge, hard carbon, oil, and grease
• Safe for use on plastic, rubber, and most painted components
• Compatible with most metals and alloys
• VOC compliant in all 50 states
• Fit type: Universal Fit
• Pail included inside

User questions & answers

Question:	Will a 4 wheeler carb fit in this
Answer:	I put dismantled outboard carbs in it without a problem. I sometimes stack them on one another and then lower the basket into the solution.
Question:	Can I use this over and over for cleaning multiple parts
Answer:	I have used the can I have for cleaning 6 different carburetors, but have also used it for cleaning miscellaneous parts. The liquid is pretty dark now, but it still cleans. So, to answer your question, yes, it can be used over and over.
Question:	What's the difference between this for 21.71 and the other one for
Answer:	38.99 is for brake cleaner not the Berryman parts cleaner with a dip basket (21.71)
Question:	What is the chemical ingredient in this
Answer:	Section 3 – Composition/Information on Ingredients Component CAS RN Weight Water 7732-18-5 40-55% Heterocyclic Amine Derivatives mixture 15-20% 2-(Butoxyethoxy) ethanol 112-34-5 8-15% 2-Butoxyethanol 111-76-2 8-10% Ethoxylated Alkyl Amines mixture 1-5% If you go to the Berryman web site you can download the SDS sheet required of all chemicals used in the workplace.

Product description

Quickly dissolves gum, varnish, fuel residues, and other deposits from carburetor, PCV valve, automatic choke, carburetor linkage, throttle body, and distributor shaft with H. E. S. T. (High Energy Solvent Technology) for maximum performance and fuel economy. Improves drivability by removing deposits that cause rough idle, stalling, and loss of acceleration. Available in a variety of sizes to accommodate any job. Catalytic converter and oxygen sensor-safe. Not VOC compliant in : CT, DC, IL, IN, MA, MD, ME, MI, NJ, NY, OH, PA, RI, VA, DE, NH, UT, CA, CA SCAQMD.

• Contains 100% High-Energy Solvent Technology
• Helps Keep Injectors, Carburettors, Intake Ports, and Valves Clean
• Quickly Dissolves Gum, Varnish, and Other Fuel Residues
• Disperses Moisture In Conventional Gasoline
• Catalytic Converter and O2-Sensor Safe
• Fit type: Universal Fit
• Flash point: -20.0 degrees_celsius

User questions & answers

Question:	Would this work well cleaning off carbon buildup around an exhaust flange
Answer:	Yes. May take a little wire brushing depending on how baked on build-up is but will definently remove.
Question:	Is this an aresol or liquid
Answer:	aresol
Question:	Fit alero Oldsmobile engine 4 cycles
Answer:	This is a solvent that works on gas/oil varnish wherever it exists. As long as the car has an internal combustion gas engine, this spray will clean the gunk out.Note: you will have to open up your engine to gain access to the gunked-up parts. Right now I have my intake off, I'll rotate the engine until both intake valves of a cylinder are closed, and am spraying this stuff onto the gunked up secondary valve.
Question:	So what does "pack of 12" mean to you
Answer:	It means 12 cans

Product features

B-12 Chemtool Carburetor, Choke and Throttle Body Cleaner

Quickly dissolves gum, varnish, fuel residues, and other deposits from carburetor, PCV valve, automatic choke, carburetor linkage, throttle body, and distributor shaft.

Includes H.E.S.T. for maximum performance and fuel economy.

Improves drivability by removing deposits that cause rough idle, stalling, and loss of acceleration.

Berryman Products was founded in 1918 and is family owned!

In the new millennium, Berryman has continued to introduce new products such as B-12 Chemtool Total Fuel System Cleanup, B-12 Chemtool Professional 3-Step Fuel System Maintenance Kit, and Environmentally Responsible products such as B-33 Engine Degreaser and B-104 Lemon Fresh Towelettes.

After 100 years in business, we are especially grateful to our customers who make us what we are today. We commit to continue providing products that meet the highest quality standards of performance, reliability and environmental responsibility.

Product description

Fast-acting immersion cleaner for all metal parts, including alloys. Removes gum, varnish, sludge, carbon, and grease without heat or agitation. Non-chlorinated and nonflammable formula is VOC-compliant in all states. Safe on plastic and rubber and will not cause rusting. Use for cleaning carburetor and transmission components, valves, and other small, hard-to-clean engine parts.

• Fast-acting immersion cleaner
• Effective on gum, varnish, sludge, hard carbon, oil, and grease
• Safe for use on plastic, rubber, and most painted components
• Compatible with most metals and alloys
• VOC compliant in all 50 states

User questions & answers

Question:	Will this work good to drop my ratchets in to clean them all out at once overnite with the dust plates off
Answer:	2
Question:	Berryman " carburetor parts cleaner " and then there is berryman " carburetor & parts cleaner " whats the difference? Is one a stronger cleaner
Answer:	I have used both green and black Poulan along with Husqvarna chain and bar oil in my Husqvarna 576 XP chain saw and Poulan limb saw and can not tell a difference in performance between them all. Buy the least expensive.
Question:	Should I reuse it for multiple different carb cleaning sessions
Answer:	I’m not 100% sure but I do not believe it is a marine grade 2 stroke oil I think it should be TW3 certified or compliant for outboards I would personally not use it but it is a great oil for my Weedwhacker for my Weedwhacker and edger and blower
Question:	Can it be used for more than one carb or will I need to buy additional cans for each part
Answer:	Yes, if the gas tank is 2.5 gallon capacity. That will insure the correct mix of approximately 50:1. If one uses a smaller tank and pours all the contents into the smaller tank, the mixture will be too rich causing the carburetor to ‘load’ up, running rough, causing heavy smoke. If one uses a larger tank;i.e.;thinner mixture, one can burn the piston and cylinder sleeve ruining the engine. 64 ounces = 1/2 gallon 128 ounces = 1 gallon 256 ounces = 2 gallons 320 ounces = 2.5 gallons 320/50 = 6.4 ounces of two stroke oil in a 2.5 gallon gas can

Product description

30 PCS carburetor cleaning brush carb cleaner kit, reliable and durable, made up of stainless steel and nylon bristles. It’s excellent rust-proof, flexible and lint-free, special spiral design for the brushes can contact well with the inner side of container for more thorough cleaning, solving the gap and blind angle problem that normal tools have. Easy to carry and store for a lightweight and compact design. Each set of 10 needles and 5 brushes comes with a detachable key ring for quick and easy access. All brushes have a convenient loop at the end of the handle to hang when not in use or to reattach to the key ring for safe keeping. Also perfect tools for cleaning Glasses, Tubes, Keyboards, Home Appliances and so on. Different diameters of 26 piece wires set with spiral knurling will fit most carburetors. Come with a lightweight, compact aluminum carrying case, a great tool keep on hand. This pack of tool will help your machine running fine and not starving for fuel or flooding. It’s specifically designed to clean out the tiny jets and carb passages from all dirt.

• SET OF 4: 20 cleaning needles + 10 nylon brushes + 26 cleaning wires. Brush diameters: 2mm, 3mm, 4mm, 5mm, 7 mm. Wire sizes diameters: 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5mm.
• CLEANING NEEDLES AND BRUSHES: Perfect for clearing out blockages or obstructions in the narrow passage of auto motorcycle carburetor. Comes with a detachable key ring for convenient hanging and storage.
• MATERIAL: Made of high density Nylon brushes and stainless steel material, it's rust-proof, non-deforming with good elasticity and no hair loss, Spiral bristles, great access to the inner side, making the washing clearly and thoroughly.
• DIFFERENT DIAMETERS: This wires set come with 13 different diameters, especially designed to clean out the tiny jets and carb passages from all dirt. Comes with a lightweight, compact aluminum carrying case, a great tool keep on hand!
• APPLICATION: Non-universal, only fit Carburetor Engine Moto, Carbon Dirt Deposit Remove. Easily clean paint off all the hard to reach areas in an airbrush, spray gun or any other item with small orifices that need cleaning like the fluid tip and air cap.

User questions & answers

Question:	is the set of 4 just 2 times the set of
Answer:	Yes. You will receive 2 sets of products, each containing 2 products.
Question:	How do you know that you are authentic
Answer:	it is misleading the sizes are not in mm, 3 mm is actually .38 mm.

Product description

A powerful solvent-based cleaner that blasts away tough carbon deposits, oil, and grime. WD-40 Specialist Carb/Throttle Body & Parts Cleaner with attachable precision straw is the only all-in-one carburetor cleaner spray you will need to clean your carburetor, throttle body, and unpainted metal parts. What makes this cleaner unique is the dual-action cleaning system. First, powerful solvents breaks up tough, baked on carbon deposits. Then, the powerful cleaning spray blasts away the deposits and waste, leaving behind no residue. The results are engines that start up fast and easy, and level to a smooth, consistent idle with less stalling. This formula is proven to improve performance at high RPMs. Great for both old and new vehicles and equipment, including; cars, trucks, tractors, motorcycles, boats, lawn mowers, weed trimmers, and other gas-powered lawn outdoor equipment. Safe for use on most unpainted metals and will not affect oxygen (O2) sensors or catalytic converters upon incidental contact. * Cleans carburetors, throttle body & metal parts * Powerful formula blasts away tough deposits * 50-state VOC compliant * Dual-Action cleaning

• The only all-in-one carburetor cleaner spray you will need to clean your carburetor, throttle body, and unpainted metal parts
• Dual-action cleaning system 1. Solvent cleaning formula breaks up tough, baked on carbon deposits. 2. Powerful cleaning spray blasts away the deposits and waste
• Results are engines that start up fast and easy, and levels to a smooth, consistent idle with less stalling
• Use on old and new vehicles and equipment including; cars, trucks, tractors, motorcycles, boats, lawn mowers, weed trimmers, and all other gas powered lawn equipment
• Improve performance at high rpms. Will not affect oxygen (O2) sensors or catalytic converters upon incidental contact

User questions & answers

Question:	Is this safe to use on a vehicles Idle auxiliary air control valve
Answer:	No it's to heavy
Question:	Will it clean a oxygen sensor
Answer:	Can't hurt it, but might be better to replace since the become lazy after 100000 miles
Question:	Will this work on Diesel engines
Answer:	Ive never had a diesel engine. For my sedan i just open the throttle and spray. It goes through the catalytic converter and out the tail pipe.
Question:	Will this clean the mass air flow sensor
Answer:	Definitely if its carbon deposits and not electrical issue.

Product features

WD-40 Specialist Fast-Acting Carb/Throttle Body Cleaner

WD-40 Specialist Fast-Acting Carb/Throttle Body & Parts Cleaner cleans your carburetor, throttle body, and unpainted metal parts. What makes this cleaner unique is the dual-action cleaning system. First, powerful solvents breaks up tough, baked on carbon deposits. Then, the powerful cleaning spray blasts away the deposits and waste, leaving behind no residue. The results are engines that start up fast and easy, and level to a smooth, consistent idle with less stalling.

WD-40 Specialist

Whether you need the original blue and yellow can with thousands of uses, or a WD-40 Specialist penetrating oil, lubricant, cleaner, or solution to protect against or remove rust, we’ve got you covered. Get the job done right with a range of products – WD-40 Multi-Use Product, WD-40 Specialist and WD-40 BIKE – and live life hands on.

• Complete Needle, Brush & Pick Tool Set: Premium 25 piece mini needle, brush and pick cleaning toolset that has 18 different sizes of stainless steel wire needles, 5 nylon brushes, and 1 needle pick. Also includes a Master Airbrush, Airbrush Resource Center access card the provides a link to detailed guides on airbrush repair.
• MAKES Cleaning EASY: Easily clean paint, dirt and other debris off all the hard to reach areas in an airbrush, spray gun, carburetor, tattoo equipment any other item with small orifices that are blocked or need cleaning.
• 13 PIECE CARBURETOR Cleaning Needle Set: Set contains 13 different sizes of cleaner needles from size 6 to 26 plus 1 one file, and it's kept organized in a blue storage case. They are ideal for cleaning out car and dirt from a carburetors tiny jets and passages.
• SHARP Needle PICK: The strong stainless steel needle pick is ultra-fine and sharp making it great for lifting, removing, and cleaning out fine orifices. The pick has a handle for easier use and a screw-on cap to safely store it.
• CLEAN AirbrushES, Spray Guns: Both the 5 piece needle set and 5 piece nylon brush set come with key rings and are about 3.5" long. The brush diameters vary from about 2, 2.5, 3.2, 4 to 5 mm. These needles and brushes are also excellent for cleaning small passages in all airbrushes, spray guns like the fluid tips, air cap holes, paint cups, etc...

User questions & answers

Question:	where is this product made
Answer:	box indicates "Made in PRC"

Product description

Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is a unique product for a few reasons. One, it comes with a drip basket, which is specifically geared toward those who prefer a hands-on approach when cleaning small engine parts. Second, the solvent included in the kit is not limited to auto use; it can clean metal parts in your home, garage or shop. It removes carbon, grease, oil, varnish, paint and grime deposits. Its formula is non-corrosive, non-chlorinated, contains no ozone depleters, phenols or cresylics. And third, Radiator Specialty's Gunk Carburetor Parts Cleaner Complete Kit is designed to diminish and remove adverse environmental characteristics. Surely anyone can appreciate that, especially when it comes to car parts.

• Cleaner comes in 96 oz. can
• Included drip basket is perfect for those who prefer a hands-on approach when cleaning small engine parts. Drip basket is included inside the can.
• Solvent is great for cleaning metal parts in home, garage or shop
• Efficiently removes carbon, grease, oil, varnish, paint and grime deposits
• Product is environmentally friendly and responsible; it is non-corrosive, non-chlorinated, contains no ozone depleters, phenols or cresylics
• Solvent formulated to thoroughly clean metal parts
• Removes soil and grime deposits

User questions & answers

Question:	Can you just put the carb in without taking it apart
Answer:	no it would not fit , also you will not get a good cleaning job. plus you could destroy some major components of the carb. not advised...
Question:	Can you submerge the tbi style 2 pin fuel injectors
Answer:	I do not know. I clean the fuel injectors for ny tractor.
Question:	can i get extra chemical say 1 qt
Answer:	I don't know but I doubt it.
Question:	What is the difference between this and berryman carburetor cleaner? Which is better
Answer:	I have always used Berryman but because of EPA rules, they removed a caustic compound from the mix and now doesn't clean as it once did. So far the Gunk works better and has one caustic still added. Your choice!

Product description

Insert extension tube in actuator, remove air filter and spray with the engine running in park or neutral. Increase engine revs while spraying. This product will clean the carburetor, throttle and choke valves. Reinstall air filter. If product is sprayed on paint, plastic or bodywork, flush with water to prevent damage. For PCV valves, disconnect the crankcase side of the valve, spray small amounts of product through the extension tube into the open end of the valve. Shake valve to ensure that check-valve is loose, start engine and spray again into valve to fully flush it.

• Carburetor and Choke Cleaner Non-Chlorinated, 12 units,12 oz per can
• Fantastic engine starter
• Low VOC formula, not for sale in CA, CT, DE, MD, NH, RI and UT
• Extremely flammable

User questions & answers

Question:	Is this product safe to use on rubber
Answer:	Good afternoon. This product contains toluene which is a strong solvent and can attack rubbers. When cleaning a carburetor or any other part it's recommended that all o-rings and rubbers are removed or protected. If rubbers receive a superficial splash of the product they will probably be ok, but we advise against doing this. If a rubber gets soaked it's not necessarily damaged, but it is likely to swell. It may recover to its original size, but it can brittle. In short, no. The product is not safe on rubbers, but an o-ring may resist a spalsh.
Question:	Some carb cleaners have a lubricating oil in it does this leave a oily film behind
Answer:	Good morning, this product does not contain any type of lubricant. On the contrary it is a strong solvent that will dissolve lubricants.
Question:	is it safe for electronics
Answer:	This is a highly flammable product with strong solvents. We do not recommend it for cleaning electronics. The risk of short circuit, fire or simply damaging non-metallic components is too high.

Product description

Specifications:

Material:304 stainless steel flexible handle, nylon and spiral bristles Color: blue, black and metal color

Size (approx.):

Cleaning brushes:

● Length: approx. 4.53 inches/ 115 mm

● Diameter: 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm

● Quantity: 5 pieces

Cleaning needles:

● Feature: stainless steel wire winding; And wire winding size: 0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm

● Length: approx. 4.53 inches/ 115 mm

Features:

Convenient:

This motorcycle carburetor cleaning tool kit comes with detachable key ring and aluminum box for convenient hanging and storage.

Practical cleaning tools:

● These cleaning needles and brushes are useful to clean small orifices such as gun-jets, nozzles, air tools, camping stoves, and so on;

● And they are suitable for all auto motorcycles, ATV, Welder, tattoo device, lawn equipment and many other power sport carburetor.

Function:

This motorcycle carburetor cleaning tool kit is designed to clean dirt from small jets and carbohydrate channels to help your motorcycle run well.

Spiral bristles are designed to make it easy to get inside and clean thoroughly.

• Are you annoyed that some tight spaces cannot be cleaned up? Congratulations on finding the one you want. 5 different width Nylon Brushes + 10 different diameter Cleaning Needles + 13 different diameter Cleaning Wires can help you clean out the blockages that you can't see. You do not need to dirty your beautiful hands. This set of tools can easily help you clean up the corners that bother you，MAKE YOUR WORK EASY.
• FREELY BENDABLE MATERIAL - The obstructions in those crooked corners are not easily cleaned. In fact, this is not worth making you increase your workload. This set of tools is made of high density Nylon brushes and stainless steel material, it’s rust-proof, non-deforming with good elasticity. Spiral bristles do not come off easily. Successfully enter the inner side, making the washing clearly and thoroughly.
• DIFFERENT DIAMETERS - These cleaning tools come with different diameters. 10 cleaning needles + 5 brushes, overall length: 4.53inch (115 mm), Cleaning brush diameters: 2mm, 3mm, 4mm, 5mm, 7 mm. Cleaning needles diameters: 0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm.
• REUSABLE CLEANING TOOLS - These cleaning tools are helical,You certainly won't spend $12 on a disposable product.As long as you use it properly, our carburetor cleaning brush carbcleaner kit can be used multiple times. High quality stainless steel materials are not rusty and easy to clean. We provide free replacement service for any problems with pin cleaners and wire cleaners.This supply will last the life of your carburetor and other machines such as the spray guns.These cleaning needle
• APPLICATION: These cleaning tools are helical, only fit Carburetor Engine Moto, Carbon Dirt Deposit Remove. Easily clean paint off all the hard to reach areas in an airbrush, spray gun or any other item with small orifices that need cleaning like the fluid tip and air cap.

User questions & answers

Question:	Are the bristles stiff or soft on these? suitable (stiff enough) for cleaning rusty bolt holes
Answer:	Dear friends, these cleaning needles and brushes help to clean up small hole dirt blockages, such as spray guns, nozzles, laboratory tubes, air tools, etc. They are suitable for all automobiles, motorcycles, ATVs, welders, tattoos, lawn equipment and many other power carburetors. It may not be suitable for rust removal.
Question:	how about it's quality
Answer:	High quality stainless steel rustproof without deformation. The quality is very good.
Question:	is this metal wire or plastic
Answer:	My friend，The smaller diameter ones are stainless steel. The larger ones have nylon bristles.
Question:	Are this suitabble to clean glow plug aperture within the cylinder head
Answer:	Theirs Avery good chances I would say the smallest is less than a 25% of 1MM in size I do also clean spark plugs for repairing mowers hope this is helpful you.

• SAVE YOUR TIME AND HANDY - Did you ever spend a lot of time on cleaning the ports? And the dock didn’t leave at all. These make cleaning a ethanol damaged or dirty carburetor a lot easier, working great and handy, never have a hard time cleaning the ports from now on.
• SMALL ENOUGH AND STURDY - Did you ever buy the set which didn’t work with your job? You worked with small engines and these didn’t even clean a motorcycle carburetor. Too big！ The Valchoose’s Tubes Brushes fit small jets and passages and nice for heavily crusted deposits like you commonly see.
• MORE DIAMETER AIRBRUSH CLEANING BRUSHES - They come with different diameters: 2mm, 3mm, 4mm, 5mm, 7mm. Length: approx. 4.10 inches/ 104 mm. Have this to clean the ethanol gunk from the small diameter passages Jet and pilot tubes - of small gas engine carbs. Have been handy for everything from weed eaters to motorcycles.
• MULTIPLE APPLICATION - The brushes and Needles are useful to clean small orifices such as nozzles, air tools, camping stoves, and so on. They are also suitable for all auto motorcycles, ATV, Welder, tattoo device, lawn equipment, snow blower and many other power sport carburetor.
• SATISFACTION - We are so confident you will love our Jet Cleaning Brushes. If you are not 100% satisfied, we will help you resolve your concern or provide a full refund with complete lifetime.

User questions & answers

Question:	Is the hair of the brush easy to fall
Answer:	Used already, no hair loss.
Question:	Can these be used to clean a tabacco pipe
Answer:	Yes, I believe so... I haven’t used it for this purpose but the brushes and wire ends do a good job on what I needed them for... and in looking at them they are long enough and sturdy enough to clean pipe residue... I hope this helps
Question:	Do they work for lawn mowers carburetor
Answer:	Yes, they do. There are many different sizes of wires and brushes to fit different carburetors. I bought them many times.
Question:	Is it small enough for carburetor
Answer:	I have used it on small engine carburetors, no problem.

Product features

WIDE APPLICATIONS

Perfect for Airbrushes, bottles, cell phones, colanders, coffee cups, dishes, drinking straws, drip tips, espresso machines, eye glasses, glass droppers and dropper bottles, hummingbird feeders, jewelry, keyboards, circuit boar, pipes, pressure cookers, sewing machines, sippy cups, small nozzles, thermal coffee tops, tubes, vaporizers, water pumps, all auto motorcycles, ATV, Welder, tattoo device, lawn equipment, snow blower and many other power sport carburetor etc.

Product description

Quickly disperses moisture and dissolves gum, varnish, and other fuel residues from the entire fuel system, fuel tank, fuel lines, fuel injectors, valves, rings and pistons with H.E.S.T.  Regular use ensures higher compression, fewer repairs, lower operating costs, and increased spark plug and injector life. Available in both consumer and commercial sizes. Catalytic converter and oxygen sensor-safe.

• Contains 100% high-energy solvent technology
• Helps keep injectors or carb(s) and intake ports and valves clean
• Quickly disperses moisture and dissolves gum, varnish, and other fuel residues
• Disperses moisture in conventional gasoline
• Catalytic converter and oxygen sensor-safe. Item has less than 3% Acetone.
• Use on the entire fuel system, fuel tank, fuel lines, fuel injectors, valves, rings and pistons with H.E.S.T.
• Ensures higher compression, fewer repairs, lower operating costs and increased spark plug and injector life

User questions & answers

Question:	Can i use it for lexus es 300 year
Answer:	It is an additive for gas fueled engines. I use it in 2007 goldwing, 1999 goldwing, 2007 dodge ram, 2013 Hyundai, 2-honda generators, 1999 motor home with V10 plus all my small lawn mower stuff. On another note I use a heavy dose for storage so things start & run in the spring. I love this stuff.
Question:	Does it work to fix catalyst problem
Answer:	If you're having a problem with your catalytic converter, I doubt it would fix it. If the problem is being caused by clogged and inefficient injectors, it will help. Be aware, that I used this chemical with an OTC fuel injector cleaning tool, and did not pour it in the fuel tank. Using the B-12 with the OTC tool made a difference on all four of the vehicles I have cleaned the injectors on so far.
Question:	does this work on diesel engine
Answer:	No, gasoline only. Seafoam works on diesel.
Question:	can i use this in a 13' Scion FR-S? its a gasonline- direct injection
Answer:	You better check their website. I just read about their products and one of them said not to use on Direct Injection Engines. Better to go to the source and know.

Product features

Berryman B-12 Chemtool Carburetor, Fuel System and Injector Cleaner

Quickly disperses moisture and dissolves gum, varnish, and other fuel residues from the entire fuel system, fuel tank, fuel lines, fuel injectors, valves, rings and pistons with H.E.S.T. Regular use ensures higher compression, fewer repairs, lower operating costs, and increased spark plug and injector life. Available in both consumer and commercial sizes. Catalytic converter and oxygen sensor-safe.

Directions:

Carefully pour entire contents into gas tank to treat up to 21 gallons of gasoline. For marine engines and vehicles or equipment that hold less than 15 gallons of gas, add a rate of 1 oz per gallon of gas. Add before refueling to ensure proper mixing. For continuous fuel system maintenance, use B-12 Chemtool Fuel Injector Cleaner every third tank. NOTE: High-mileage vehicles and vehicles which have not had regular fuel system maintenance every 3,000 miles may require a thorough fuel system cleaning. Berryman B-60 High Mileage Fuel System Rejuvenator (part #7516) is specially-formulated with a proprietary blend of strong solvents and high performance detergents to completely clean older and neglected fuel systems.

Product description

Specifications:

Material:304 stainless steel flexible handle, nylon and spiral bristles Color: blue, black and metal color

Size (approx.):

Cleaning brushes:

● Length: approx. 4.53 inches/ 115 mm

● Diameter: 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm

● Quantity: 5 pieces

Cleaning needles:

● Feature: stainless steel wire winding; And wire winding size: 0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm

● Length: approx. 4.53 inches/ 115 mm

Features:

Convenient:

This motorcycle carburetor cleaning tool kit comes with detachable key ring and aluminum box for convenient hanging and storage.

Practical cleaning tools:

● These cleaning needles and brushes are useful to clean small orifices such as gun-jets, nozzles, air tools, camping stoves, and so on;

● And they are suitable for all auto motorcycles, ATV, Welder, tattoo device, lawn equipment and many other power sport carburetor.

Function:

This motorcycle carburetor cleaning tool kit is designed to clean dirt from small jets and carbohydrate channels to help your motorcycle run well.

Spiral bristles are designed to make it easy to get inside and clean thoroughly.

Packing contents:

2 x 10 Stainless steel needle brushes

2 x 5 Stainless steel nylon brushes

2 x Oil cleaner box (each box includes 13 pieces cleaning wires inside)

• Are you annoyed that some tight spaces cannot be cleaned up? Congratulations on finding the one you want. 5 different width Nylon Brushes + 10 different diameter Cleaning Needles + 13 different diameter Cleaning Wires can help you clean out the blockages that you can't see. You do not need to dirty your beautiful hands. This set of tools can easily help you clean up the corners that bother you，MAKE YOUR WORK EASY.
• FREELY BENDABLE MATERIAL - The obstructions in those crooked corners are not easily cleaned. In fact, this is not worth making you increase your workload. This set of tools is made of high density Nylon brushes and stainless steel material, it’s rust-proof, non-deforming with good elasticity. Spiral bristles do not come off easily. Successfully enter the inner side, making the washing clearly and thoroughly.
• DIFFERENT DIAMETERS - These cleaning tools come with different diameters. 10 cleaning needles + 5 brushes, overall length: 4.53inch (115 mm), Cleaning brush diameters: 2mm, 3mm, 4mm, 5mm, 7 mm. Cleaning needles diameters: 0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm.
• REUSABLE CLEANING TOOLS - These cleaning.As long as you use it properly, our carburetor cleaning brush carbcleaner kit can be used multiple times. High quality stainless steel materials are not rusty and easy to clean. We provide free replacement service for any problems with pin cleaners and wire cleaners.This supply will last the life of your carburetor and other machines such as the spray guns.These cleaning needle
• APPLICATION: These cleaning tools are helical, fit Carburetor Engine Moto and spray gun Carbon Dirt Deposit Remove. Easily clean paint off all the hard to reach areas in an airbrush excellent for spray gun any other item with small orifices that need cleaning like the fluid tip and air cap.

User questions & answers

Question:	Does it include brushes of different diameters
Answer:	es, it has the size and diameter you need
Question:	Will these work for lawn mower carburator
Answer:	yes they will I have used them for 5 years make sure you dont go bigger than the jet hole .works great cleaning out air passages and transitional passage ways hope this helps .
Question:	is the hair hard or soft? Is it suitable (with enough hardness) to clean rusty bolt holes
Answer:	Hello! These cleaning needles and brushes are suitable for cleaning small orifices such as spray guns, nozzles, pneumatic tools, camping stoves, etc.; they are suitable for all automobiles, motorcycles, ATVs, welders, tattoos, lawn equipment and many other electric sports carburetors. May not be suitable for cleaning rust. I hope you can find a better one.