12 best discount ramps 2 bike carriers

• Transports 1-2 bicycles on an RV or camper trailer bumper (max 60 lb. capacity)
• Designed for 4" to 4.5" square RV bumpers, installs with 6.5" U-bolts around the RV bumper
• 2"W Tire wells with 6.25" spacing between wells, 4" from bolt to first well
• Single L-style support tie-down 19.5"H brace (bicycle tie-downs sold separately)
• Heavy duty steel construction with a black paint finish

User questions & answers

Question:	Can it be used on a travel trailer with a spare tire
Answer:	Hi Kellie,These SA-8 are PASSIVE 8" loudspeakers, meaning they will require a power amplifier to "drive" or power them. These SA-8 are rated at 75W RMS at 8 Ohm, and ideally the power amplifier driving the speakers would be around 1.5 times stronger than the speakers themselves, so 75 * 1.5 = 112W RMS at 8 Ohm. We offer 2 amplifiers that could work, the LE-3000 and the MBG-4000. The MBG-4000 is currently out of stock, but you can check out the LE-3000 here:LE-3000 2 Channel Power Amplifier:https://www.amazon.com/Seismic-Audio-3000-Power-Amplifier/dp/B004991VKQ/ref=sr_1_1?ie=UTF8&qid=1495547376&sr=8-1&keywords=le-3000+seismic+audioThe LE-3000 is rated around 250W RMS at 8 Ohm, so it is a bit stronger than you would need, but ultimately you are in control of the amount of power sent to the speaker, via the volume dials on the front of the amp. In addition to the amplifier, you will need 2 types of cables. One of these will connect from the OUTPUT of your music device (phone, tablet, laptop etc.) and connect to the INPUT on the LE-3000 power amp. If you only purchase one of these SA-8 speakers, you will need a cable that will SUM the STEREO output of your music device to a MONO signal, since only one speaker will be used. For this, you could use something like our SA-ISTXMOX6 1/8" (3.5 mm) to single Male XLR, which can be viewed here:SA-iSTXMOX6 - 1/8" STEREO to single Male XLR MONO:https://www.amazon.com/Seismic-Audio-SA-iSTXMOX6-6-Feet-Stereo/dp/B00TXCBO1K/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1495548020&sr=1-1&keywords=sa-istxmox6You will also need a cable to OUTPUT from the LE-3000 power amplifier and INPUT into the SA-8 speaker. Since the SA-8 speaker has a dual 1/4" jackplate, and the LE-3000 has Speakon (twist lock) outputs, I recommend using a cable that is Speakon on one side and 1/4" on the other, product code SASPT12. Here is a link to the 15 foot SASPT12-15:SASPT12-15 - 15 Foot Speakon to 1/4" Speaker Cable (12 AWG):https://www.amazon.com/Seismic-Audio-SASPT12-15-12-Gauge-Conductor/dp/B00QNU43YA/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1495547487&sr=1-1&keywords=SASPT12-15When you connect these cables to the back of the amplifier, if you input the SA-iSTXMOX6 cable into Channel A on the LE-3000, then you will need to connect the SASPT12-15 Speakon to 1/4" cable to the Channel A output on the LE-3000. Take a look at these items and let us know if you have any questions. Also, let us know if you planned on purchasing 2 of these SA-8 speakers, as this would change the input cable you would need.Thanks,Rusty
Question:	Is this 60 lbs weight limit for each bike or total for 2 bikes
Answer:	Hello, thank you for your interest in Seismic Audio SA-15t speakers. They are designed as PA speakers and can be used to play bass guitar through a PA. Have a great day!
Question:	What keeps the bikes from falling over? Are they held only by the bottom of the wheels
Answer:	Hi, The Berhinger iNUKE NU3000 should do a pretty god job powering these Seismic Audio SA-15T passive 15" loudspeakers. The SA-15T are rated at 350W RMS at 8 Ohm per cabinet, and the Behirnger NU3000 looks to be outputting around 440W per channel, at 8 Ohm in "stereo" or "parallel/mono" modes. We typically recommend your amplifier be around 1.5 times stronger than the speakers they are powering, in order to push the speakers to their full potential, before you clip the outputs of the amp. This would put the ideal rating for the amp for these SA-15T at 525W RMS at 8 Ohm, but I still believe the 440W from the Behringer should do a decent job. Thanks, Rusty
Question:	For an RV, is there still room for the car towing with the hit Ha
Answer:	Hello, thank you for your interest in Seismic Audio SA-U4HH4-2 wireless mics. The receiver has the ability to select multiple frequencies per channel, but does not automatically check for new frequencies if there is interference on the one selected. Have a great day!

Product features

Elevate Outdoor Two-Bike RV Bumper Bike Rack

Sold as pairs

Make bicycle transportation for long camping trips easy with the Elevate Outdoor RV Bike Rack. This bumper bike rack is designed from heavy-duty tubular steel and has a rust-preventative black powder coat finish. It provides a safe effective means for securing bicycles to RV campers. Installation is a breeze! Simply line up the carrier rack and fasten the U-bolts to a square 4" to 4.5" RV bumper along with the bike carrier racks and the "L" style tie-down bracket. This RV Bike rack comes with all of the necessary hardware for rack installation.

Installs easily on RV bumpers

Wheel slots and frame brace keep bikes steady

Dimensions

Bike Carriers and More

Elevate Outdoor provides affordable automotive accessories for hauling, loading and transporting commercial or recreational cargo. In addition to bike storage, Elevate Outdoor offers bike stands and racks, cargo control bars, cargo carriers, tire steps, truck racks and truck bed extenders, and more.

• Durable, hitch-mounted motorcycle carrier for use with dirt bikes and motorcycles; comes with self-storing ramp that can be attached to carrier during transport
• Track measures 6' 3.5" L x 5.5" W; ramp measures 6' 1.125" L x 5.5" W; maximum 400 lb weight capacity
• Works with 2" Class III or IV hitch receivers; fits bike wheels up to 5.5" W
• Ramp installs either side for bilateral roll-on, roll-off action; includes a youth dirt bike adapter and anti-tilt bracket
• High-strength, lightweight aluminum construction

User questions & answers

Question:	Will this work for heavy E Bikes
Answer:	They should be fine. Remember nothing without studs/chains works great if there is an icy base though.
Question:	Will this carrier actually haul 400 lbs? i have a honda xr650l that weighs 350 lbs. has anyone tested this carrier at its 400 lb limit
Answer:	Yes

Product features

Black Widow Aluminum Dirt Bike Carrier with Extra-Long Ramp

Loading and transporting your bike is even easier thanks to the extended ramp that comes with the Black Widow Aluminum Motorcycle Carrier. This carrier features an extra-long 6’ ramp, making it ideal for higher vehicles or simply for easier loading with a more gradual slope. The ramp can be used on either side of the carrier and conveniently stores flat on the carrier when not in use. A high-strength aluminum track and ramp and powder-coated steel hitch mount makes this carrier durable, yet easy to handle, while the anti-tilt device keeps it stable during transport. Additionally, a spacer bar adapter is included to accommodate youth 50-80cc dirt bikes.

Extra-long 6' ramp for easier loading

Spacer bar adapter for youth bikes

Secure ramp and carrier hook connection

Black Widow - Motorcycle Carriers and More

Black Widow offers affordable loading, unloading and transportation options for powersports users with motorcycles, dirt bikes, ATVs, and more. Our motorcycle carriers are designed to provide a cost-effective alternative to hitching up a trailer, and allow you to easily roll your bike up and onto the carrier platform.

Product description

When your hitch-mounted carrier is not in use, but you don't want to struggle with uninstalling it, use the Folding Hitch Adapter, available exclusively from DiscountRamps.com. The heavy-duty trailer hitch adapter allows you easily to fold up your hitch-mounted carrier when not in use to save yourself the hassle of repeated removals and installations. See specs below for compatibility requirements. To determine if the Folding Hitch Adapter will work with your hitch-mounted carrier measure the distance between the end of the hitch tube and the hitch pin hole. The hitch pin hole must be no closer than 2-1/2" from the end of the hitch and no further than 3".

• Folding hitch adapter allows you to fold up your hitch-mounted carrier when not in use; works with 2" Class III or IV vehicle hitch receivers
• Measures 13.5" L x 2.375" W x 5.375" H; maximum 500 lb weight capacity; weighs 9 lbs
• Requires between 2.5" to 3" clearance from hitch tube end to hitch pin hole
• 5/8" Hitch pin hole size
• Heavy-duty steel construction

User questions & answers

Question:	does this block the view of the license plate
Answer:	Every alarm is the same as far as sensitivity. It all depends where you put the shock sensor.
Question:	It stated this folder is 500lbs capacity max. if my motorcycle rack weight is about 65-70lbs , so i only can carry a bike with less than 430lbs
Answer:	No problem at all. Work perfect in my Silverado LT 2012. Thanks.
Question:	Can this be mounted upside down so the bike rack tilts away for access to the back hatch of an SUV
Answer:	Yes it will. We strongly advise our customers to have a certified technician to perform the product installation.
Question:	Will this fit my Honda Pioneer 700 and clear the tailgate when folded up
Answer:	This item is mainly for a Chinese scooter, I’m not sure if it will work on a honda ruckus.

Product features

Black Widow Folding Hitch Adapter

• Allows a hitch-mounted carrier to fold up against your vehicle when not in use
• Requires between 2.5" to 3" clearance from hitch tube end to hitch pin hole
• Manufactured from heavy-duty steel with a 500 lb. weight capacity
• Designed for Class III or IV 2" hitch receivers; 5/8” pin hole size
• Compatible with Black Widow AMC-400, MCC-500 and Apex CC-4820-DLX, CC-6020-DLX, and HS-2

Stays Flush with Bumper

The folding mechanism of this adapter pulls your hitch-mounted carrier flush with the bumper for maximum maneuverability.

Minimum Tube Requirements

Your hitch tube should be at least 2.5" to 3" for installation and use.

Ample Weight Capacity

A generous 500 lb. weight capacity makes it easy to use this folding adapter with any bike or cargo.

Black Widow Folding Hitch Adapter

Designed to work with existing receiver hitches and utility hitch mounted products, our wide variety of hitch adapters are designed to help meet a variety of towing needs. With multiple classes, sizes, and types available, you'll be able to find the perfect adapter for the hitch on your van, truck, or trailer!

Product description

The Black Widow AMC-400-F folding bike carrier transports a dirt bike, off-road MX bike, or motocross bike using a vehicle hitch receiver instead of a motorcycle trailer or pickup truck bed tie-down system. The folding aluminum motorcycle carrier is durable, lightweight, and works with most off-road dirt bikes with tires up to 5.5" wide. Includes HC-FA heavy-duty folding hitch adapter which allows the dirt bike carrier to fold up against the truck tailgate for storage. It comes with a 45.5" L ramp for easy loading and unloading, which attaches to the dirt bike carrier between uses. Each folding carrier includes two integrated tie-down points for securing and stabilizing dirt bikes, and a spacer bar for 50-80cc youth dirt bike hauling. The carrier platform is all aluminum, and the hitch tube and support frame are made of steel. Rungs are spaced 6.75" apart to help keep wheels firmly in place with a 16" spaced rung at one end for increased tire stability. It's an excellet choice for hauling dirt bikes with pickup trucks, SUVs, RVs, and vans. Clearance measurements: 27" from center of hitch pin on folding adapter to the center of motorcycle carrier platform. An anti-tilt bracket is included to reduce side to side wobble.

• Durable, hitch-mounted folding motorcycle carrier for use with dirt bikes and motorcycles; comes with self-storing ramp that can be attached to carrier during transport
• Track measures 6' 3.5" L x 5.5" W; ramp measures 3'' 11" L x 5.5" W; maximum 400 lb weight capacity; 27" clearance from folding adapter hitch pin to carrier
• Works with 2" Class III or IV hitch receivers; fits bike wheels up to 5.5" W; carrier can be folded up when not in use
• Ramp installs either side for bilateral roll-on, roll-off action; includes heavy duty folding hitch adapter, a youth dirt bike adapter, anti-rattle device and anti-tilt bracket
• High-strength, lightweight aluminum construction

User questions & answers

Question:	are there brackets to capture the tires
Answer:	You may need to use relays.
Question:	I hve a two concerns. Is the 45" length of the ramp too short for an old man to handle pushing a 200 lb. scooter onto the carrier and a 27"hitch drop to the ground
Answer:	Barely. This also depends on your capabilities.
Question:	Does this come in a double rack
Answer:	Hi, unfortunately you can not remove the factory alarm in this vehicle because the car will not start without it. But there are several ways to disable it. In your overhead console there is a the IR receiver you can just take out. Also according to the www.bulldogsecurity.com website, the jeep's factory alarm shutdown wire is a violet wire with a yellow tracer behind the driver's side kick panel. This will take a negative pulse when disarmed from your new security system if available. I hope this helped.
Question:	will a honda xl650 fit this carrier
Answer:	I got it for son-in-law,don’t know about the button but he is very happy with the alarm!!

• Durable, hitch-mounted motorcycle carrier for use with dirt bikes and motorcycles
• Self-storing ramp installs on either side with roll-on, roll-off design for easy loading and unloading
• Includes an anti-rattle device and spacer bar adapter to fit youth 50-80cc bikes
• Manufactured from lightweight aluminum with a 400 lb. weight capacity
• Designed for bikes with wheels up to 5-1/2" wide and use with Class III or IV hitch receivers

User questions & answers

Question:	What is the distance from the center of the hitch pin (the pin that holds this into the receiver), to the center of the wheel track when installed
Answer:	I've put roughly 5000 miles on mine with no problems. KTM 500. Just check the bolts that stabilize the post to the receiver occasionally and run a ratchet strap from the bike to the bumper to keep it from rocking.
Question:	I have an fj cruiser and im curious does this ramp stick out far enough where the spare tire wont get in the way
Answer:	103 years old....
Question:	Traveling frm alaska to california 3200mi will this hold up? wr250r is the bike
Answer:	Part of the “class” requirement is related to the tongue weight. This is the amount of weight that can weigh down vertically on the steel receiver that you put the bar into for this carrier. The 3500 lbs you’re referring to is the towing rating. This has nothing to do with how much weight can be loaded down on the receiver, which is the only important thing when considering something like this that is suspended in the air and not in contact with the ground, like a trailer would be. In other words, this may fit your receiver, but you wouldn’t be able to approach the 500 lb weight capacity without risking failure.
Question:	how old do you have to be
Answer:	I think it would work. It sticks out a good distance but if it was too close, you can buy a hitch extension to make it work.

Product features

Black Widow Aluminum Dirt Bike Carrier

Haul your dirt bike, electric bicycle or fat tire bicycle without the hassle of pulling a trailer by installing our best-selling dirt bike and motorcycle carrier on your Class III or IV 2-inch trailer hitch. Made from high-strength aluminum, this versatile motocross/dirt bike carrier is lightweight, easy to handle, and very durable. It includes a loading ramp, which can be installed on either the front or the back of the carrier and allows for loading and unloading from either side. The ramp stores flat on the carrier when not in use. Also includes an anti-rattle device to ensure stability during transport, and a spacer bar adapter for transporting youth 50-80cc dirt bikes.

Strong Yet Lightweight Design

Built in aluminum, this carrier weighs only 36.5 pounds, making it incredibly easy to install or remove. Bonus to aluminum - it doesn't have the same potential to rust as steel.

Roll-up/roll-off - load your bike from the left or right

The loading ramp can be set up on the right or left side of the carrier so that you can load and unload from either direction. Great for accommodating parking lot traffic, tight spaces, or natural hazards.

Self-storing ramp

The ramp attaches directly to the carrier when it's not needed so that you don't have to worry about losing it in transit or when you're back at home.

Black Widow - Motorcycle Carriers and More

Black Widow offers affordable loading, unloading and transportation options for powersports users with motorcycles, dirt bikes, ATVs, and more. Our motorcycle carriers are designed to provide a cost-effective alternative to hitching up a trailer, and allow you to easily roll your bike up and onto the carrier platform.

• HIGH-STRENGTH, LIGHTWEIGHT ALUMINUM: This durable cargo carrier is easy to install and use, and will hold up for years to come.
• 550 POUND WEIGHT CAPACITY: The 550 lb. weight capacity is perfect for moving coolers, lawnmowers, construction materials, hunting gear, and other large loads.
• SLATTED DESIGN: The slatted design allows for moisture and debris to wash through the carrier and provides ample tie-down points.
• TRAY MEASURES 49-1/8" L x 22-5/8" W x 4-3/4" H: The tray is the perfect size for all of your hauling needs.

User questions & answers

Question:	Is the shank steel
Answer:	Yes it is steel. The gussets are also steel
Question:	How long and wide is inside
Answer:	The height is 3 3/4" The short dimension is 21 1/8" The long dimension is 47 5/8" with inside radius corners at all corners
Question:	Does this unit come available with a tilt up
Answer:	The one I bought did not.
Question:	How do the corners attach to the sides? I don't see screws in the image; it just looks like the sides slide into the corners
Answer:	The corners are welded as well as the whole carrier is welded together there are no screws.

Product features

Elevate Outdoor Premium Cargo Carrier

This Elevate Outdoor Premium Cargo Carrier is ready to haul your extra gear for work or play. Its lightweight aluminum construction is perfect for one-person installation; just slide it into a Class III or IV hitch receiver and it’s ready to use. The versatile slatted design provides multiple tie-down points, making it a breeze to attach coolers, lawn equipment, hunting gear, and more to this flexible and durable cargo carrier.

Installs easily on Class III or IV hitch receivers

Underside view

Rounded edges with quality welding

Cargo Carriers and More

Elevate Outdoor provides affordable automotive accessories for hauling, loading and transporting commercial or recreational cargo. In addition to cargo carriers, Elevate Outdoor offers bike carriers and racks, cargo control bars, tire steps, truck racks and truck bed extenders, and more.

Product description

The Black Widow extra-long 6' ramp makes loading your bike extra-easy. Suitable for vehicles with a higher hitch, or simply for a more gradual slope, the long ramp accessory quickly swaps out the standard ramp on your AMC-400 motorcycle carrier. With the same lightweight yet strong aluminum construction, it's just as easy to use and store.

• Fits the AMC-400 motorcycle carrier; can be used instead of the original 3' 11" L AMC-400 ramp
• Measures 6' 1.125" L x 5.5" W; maximum 400 lb weight capacity
• Works with 2" Class III or IV hitch receivers; fits bike wheels up to 5.5" W
• Provides a gentler incline for easier loading
• High-strength, lightweight aluminum construction

Product description

This Apex Cargo Carrier comes with a 4-bike rack so that you no longer have to choose between bikes or items - you can transport them all at once. Made from powder-coated steel, this carrier has a 300-pound weight capacity when all 4 bike slots are in use, and the 4-bike rack can support four bikes weighing a combined total of 120 pounds. The bike rack arm can be removed entirely or rotated 90 degrees and installed horizontally if you aren't transporting your bikes or want to store the carrier compactly. When the bike rack arm is removed or installed horizontally, the carrier can be folded up to reduce your vehicle's footprint. Rubber cradles on the bike rack attachment securely hold bikes without scratching the frames.

• Cargo carrier with attachment to transport 4 bikes using your vehicle's 2" Class III or IV hitch
• Cargo carrier has 300 lb weight capacity; bike rack has 120 lb total weight capacity
• Bike rack attachment can be removed or re-installed horizontally rotated when not needed
• Cargo carrier folds up against the vehicle for easy storage; rubber cradles hold bikes without scratching the frames
• Durable, powder-coated steel construction

User questions & answers

Question:	Length is 57” - 4.75 feet. CA legal code is no more than 4 ft over hang. Is this rack illegal in some states due to length
Answer:	See California code 24604, it can stick out further than 4 feet with flags (and lights at night). My estimate from the bumper to the end of the bike rack is about 53 or 54 inches with my hitch. When you put a bike on it, it will probably stick out a bit further.
Question:	Is this rack rated to be mounted on the back of a Travel trailer
Answer:	I dont what you mean by rating, but some RV tear hitches have a low weight rating, so I suggest you check that. It works on my SUV receiver. The other possible concern is how far it sits behind the vehicle, especially with the bike rack. Bikes will be about 3-1/2 feet or more from the back of the trailer.
Question:	Does the rack come with a safety feature so it can not be easily stolen
Answer:	Yes the bolt for the trailer pin screws in and can be tightened down with a wrench. It would make it tough but not impossible.
Question:	Can the bike rack be attached directly to the hitch on its own (without the cargo carrier
Answer:	No, it is made to go over a 2 inch square steel piece, not inside. I plan on making my own 2 inch steel short adapter to put inside the hitch and have the bike rack slide over with a hole for the pin. That way I can use it either way.

Product description

Features a unique hook adjusting system designed to allow quick height adjustment of hooks using quick pins then fine adjustments by rotating knobs to hold bike frame to the rack securely.

• Includes two foam-padded hooks to secure and stabilize bikes to the rack without scratching bike's finish. Hooks and tire cradles adjust to fit most bikes frames with 20" to 26" wheel sizes
• Vertical post can be quickly removed for compact storage
• Bike tire cradles can be adjusted along horizontal bars using quick knobs for convenience and includes rubber straps for added stability.Material:Steel
• Fits Class III and IV standard 2" hitch receivers. 80 lbs Maximum Capacity or up to 40 lbs per bike
• Fit Type: Universal Fit
• Patent Pending
• PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION.
• Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport.

User questions & answers

Question:	Can my tailgate come down with this on
Answer:	Not with the bikes in the carrier, but if you don’t put the center post in, you can lowe the tailgate.
Question:	Will this work with a 29” full suspension? Length I guess the main concern
Answer:	Yes it will work..
Question:	could it hold Radrover 4"fat electric bike
Answer:	If the 4” refers to the width of your tires, then no it won’t. I have a mountain bike with 2.65 tires and I either let the air out of the tires or force them in the tire cradle.
Question:	How easily does the fold down function work
Answer:	It looks like the latest iteration of the product (Sep, 2020) no longer offers the fold down feature.

Product features

MaxxHaul 50027 Hitch Mount Platform Style Bike Rack

As one of the manufacturers and distributors of recreational towing and hitch-mount products, MaxxHaul was conceived by our customers' need for a new high quality value brand. With in-house design and quality inspectors and facilities overseas, you'll know your MaxxHaul is here 'For The Long Haul'

Our newly improved MaxxHaul 2-Bike Platform Style Hitch Mount Bike Rack is ideal for your SUV's, trucks, sedan with 2" hitch receiver. Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport.

Hitch tightener is included to reduce if not eliminate hitch play, wobbling and hitch noise.

Safety First

Always use straps or other securing device to secure bicycles and keep bicycles from excessive movement during transport. Never exceed maximum capacity of 40 lbs per bike or 80 lbs. distributed weight capacity. Read and understand manual prior to using this product.

Unique And Effective

Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport

Quick Assembly & Installation

Vertical post can be quickly removed using our included quick hitch pins to allow for easy assembly and disassembly for compact storage

Universal Fitment

Platform Bike Rack is equipped with 2" x 2" hitch bar for use on standard 2" Class III and Class IV hitch receivers

Ideal For Various Applications

Perfect for your SUV's, trucks, sedan with 2" hitch receiver.

Product description

improve a vehicle's cargo versatility with an aluminum hitch-mounted carrier basket built tough for utility hauling. The hitch cargo basket carrier features a spacious 47" x 27.75" usable platform area with 7.5" high side rails, a large 500 lb. load capacity, and an integrated 42.5" x 26" ramp to make it easier to load and transporting gear with a 2" class III or IV vehicle hitch receiver. Great for utility hauling, carrying sports and camping equipment, lawn mowers, Snow blowers, tailgate coolers and more made with durable all-aluminum construction with a reinforced steel support system.

• Hitch-mounted cargo carrier basket for 2" Class III or IV receivers
• Built-in loading ramp and tie-down anchor points
• Large 500 lb capacity for utility hauling, lawn mower and snow blower transport
• Spacious platform with 47" x 27.75" usable cargo area and 7.5" high side basket rails
• All aluminum construction with a reinforced steel support system

User questions & answers

Question:	Does this come a stabilizer like some others do
Answer:	Yes it does. It bolts against the rack and against your hitch.
Question:	does this fold up against the car
Answer:	no
Question:	Is this ok to us with a 1.25" converter
Answer:	I think it would be if the 1.25" converter is secure (bolted tight). There is a bracket included to secure the 2" tube. Hope this helps.
Question:	Is assembly required
Answer:	Yes, assembly is required but that made it nice because you can assemble with the ramp on either side depending on your situation.

Product description

Let's Go Aero bring a fresh perspective to travel and gear management as it combines its award-winning GearCage mount and the state-of-the-art design of the Vme's wheel-touch only bicycle carriers. No longer must travelers choose between packing extra underwear or bring their favorite Bike along. Built on the GearCage platform, the Rack-IT 2-Bike Accessory Rack is designed for carrying two bikes of any size and frame above the GearCage cargo carrier, leaving the rack unobstructed use of the cargo rack's capacity for cargo gear. Using Vme's Zero-G technology, the Rack-IT grips the bicycles at opposite points on each tire allowing the carrier to motionlessly transport bicycles ranging from the smallest kids bikes to the largest mountain bikes. Weighing only 17lbs, the Rack-IT leaves lots of room for all new Bike, Board, & Bag accessories including the BikeBag 2-Bike Cover with LED lights, the 9 c.f. AerBag Storage System, and the Fat Bike Cradles for even the widest of tires.

• Carries Two Bikes of Any Size by the Wheels Above Your GearCage Cargo Rack (sold separately models H01380 & H01397)
• Zero-g bike freeze technology eliminates all bike motion with wheel touch support only
• Weighs 17 lbs. with removable wings for hatch access & Modular storage
• Easily adjustable wheel cradles with durable rubber straps for a tight grip on bike wheels
• Four cushion pads for casual frame-to-rack contact

User questions & answers

Question:	Does it fit on a cargo carrier other than the gear cage one
Answer:	No, the Rack-It is specially designed to mount on GearCage Cargo Carriers only.

Product description

The CURT aluminum trailer hitch cargo carrier with ramp provides an innovative solution for transporting a mobility scooter, push mower, snow blower or other large cargo. It features a unique double-folding ramp that folds in half vertically during travel to greatly reduce wind resistance and drag. The ramp also folds out to allow for easy loading of a power scooter chair or other cargo, and it folds into the cargo basket itself for easy storage and portability when not in use. This scooter hitch carrier is rated for 500 pounds, featuring a high-strength, welded aluminum tubular frame. The basket bolts together quickly and easily with eight bolts, and it comes with a standard 2-inch shank to fit most class 3, class 4 and class 5 hitches. For maximum safety while traveling, this trailer hitch cargo carrier with ramp features an anti-rattle threaded shank to deter vibrations and wobbling of the cargo. It is also equipped with built-in reflectors for increased visibility. When not in use, the CURT aluminum hitch carrier with ramp can be folded up with its folding shank, promoting safer parking and helping to eliminate obstructions. This hitch carrier basket is constructed from lightweight, highly corrosion-resistant aluminum and has a durable carbide black powder coat finish for extra protection against the elements. The cargo carrier measures 50 inches x 30-1/2 inches x 4 inches, and it comes with an anti-rattle hitch pin to readily install on the vehicle after assembly. It also features eye-bolts along the outer walls, providing convenient tiedown points for fastening cargo ratchet straps, rope, a cargo net or bungees.

• THREE-POSITION RAMP. This hitch cargo carrier features an innovative folding ramp. The ramp folds out for easy loading of a mobility scooter, push lawn mower, snow blower or other cargo. It can be folded in half vertically for easy transportation
• LIGHTWEIGHT ALUMINUM. This trailer hitch cargo carrier with ramp is constructed from aluminum to be strong, highly corrosion-resistant and easy to move and operate. It also features a durable carbide black powder coat finish for added weather protection
• 500 POUND CAPACITY. For dependable transportation of your mobility scooter or other large cargo, this scooter hitch carrier is tested and rated for 500lbs. It also features integrated eye-bolts for secure tiedown anchors
• ENHANCED SAFETY. The CURT aluminum cargo carrier with ramp comes with an anti-rattle hitch pin for ready installation and vibration resistance while traveling. It also features built-in reflectors for enhanced visibility on the road
• STANDARD FIT. This trailer hitch cargo carrier with ramp is perfect for installing on most class 3, class 4 and class 5 hitches, featuring a folding 2-inch x 2-inch shank

User questions & answers

Question:	What will be the clearance from the ground on toyota rav
Answer:	Depends on how much weight you will have on it. I would guess with a good amount of weight you might see around 6 to 12 inches of a drop
Question:	can it be modified/assembled for driver side ramp
Answer:	Yes. It could be assembled for drivers side ramp.
Question:	Anyone know the width of the ramp itself
Answer:	The ramp fits inside the frame and is 29 1/2” wide
Question:	The product details state that it is 55 inches long by 36 wide by seven the product description says it’s 50 x 30 1/2 x 4 which dimension is correct
Answer:	50"x30.5"x4" is the correct dimensions.

Product features

CURT Hitch Cargo Carrier with Ramp

The CURT hitch cargo carrier with ramp is unique among hitch carriers with ramps because of its double-folding design. The ramp folds in half -- not just hinging at the base -- providing easier operation when folding and unfolding.

The ramp provides a dependable platform for loading a scooter, push mower, snow blower and more. Because it folds in half, it also has less wind resistance during travel for a safer, smoother ride.

Extended

For easier loading of heavy items, this cargo carrier has an extra-long ramp and built-in ridges that provide dependable traction. The ramp locks into place in the extended position, allowing for safe, confident loading of cargo.

Folded vertically

During travel, the ramp can conveniently be folded vertically. Unlike other ramp cargo carrier options, this ramp folds in half in the vertical position, ensuring less drag and wind resistance while the vehicle is moving.

Stowed

When the cargo carrier is not in use, the ramp can be completely folded into the cargo carrier basket. This allows it to remain conveniently out of the way until needed for use again.

Folded shank

This hitch cargo carrier with ramp also has a folding shank, allowing the entire carrier to be folded up vertically for easier parking and compact storage. The unique, double-folding feature ensures zero obstructions when folding up the cargo carrier.

Threaded anti-rattle shank

To help keep the cargo carrier and your load from wobbling and swaying during travel, the CURT cargo carrier with ramp features a threaded shank that locks tightly into place using a bolt-style hitch pin. The threaded shank also helps reduce rattling and noise common while towing.

Six integrated eye bolts

Around the outside perimeter of the cargo carrier basket are six eye bolts. Integrated with the cargo carrier frame, these bolts provide secure tie-down points for ratchet straps, a cargo net or a cargo bag. They are easy to use and help keep large, bulky items better secure for the road ahead.

Built-in reflectors

For enhanced safety for you and your fellow drivers on the road, the CURT hitch carrier with ramp has integrated reflectors. Built into the rear panel of the frame, these reflectors add visibility to your vehicle and help alert other drivers.

8-bolt assembly

Assembling the CURT hitch cargo carrier with ramp is quick and easy with its 8-bolt configuration. Right out of the box, the cargo carrier can be assembled, using the included bolts and just a few simple hand tools.