14 best n guage train sets

Product description

Empire Builder Ready To Run 68 Piece Electric Train Set - N Scale. American railroads helped build great fortunes and the wealth of the Nation. Doing its part, our Empire Builder train set comes complete with Bachmann‘s exclusive E-Z Track snap-fit track and roadbed system. This set includes; Northern 4-8-4 steam locomotive and tender with operating headlight, wood reefer, single-dome tank car, center-flow hopper, plug-door box car, wood stock car, wood-braced gondola, open quad offset hopper, offset cupola caboose, 44” x 24” oval of nickel silver E-Z Track including 11 pieces curved track, 8 pieces straight track and 1 curved plug-in terminal rerailer, 12 telephone poles, 24 railroad and street signs, power pack and speed controller, illustrated instruction manual.

From the Manufacturer

American railroads helped build great fortunes and the wealth of the Nation.

• Complete Ready To Run 68 Piece Freight Train Set
• Powered by a Northern 4-8-4 Steam Era Locomotive and Tender with Operating Headlight
• Includes; Wood Reefer Car, Single Dome Tank Car, Center-Flow Hopper Car, Plug-Door Box Car, Wood Stock Car, Wood Braced Gondola Car, Open Quad Offset Hopper Car, Off-Set Cupola Caboose, Railroad Signs, Street Signs, and Telephone Poles
• 44" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Designed for Use by Experienced Hobbyist – Not Meant for Beginners
• Small Highly Detailed Components – For Consumers Ages 14 and Up

User questions & answers

Question:	I was wondering if you can get the regular track without the ez plastic balis built n it? Just plain track
Answer:	This set comes prepackaged with with E-Z Track. Plain track would have to be purchased separately. -Nicholas Smith Trains
Question:	Hi...i'm a newbie...is this dcc and what's the difference between dcc and not dcc
Answer:	This is not DCC I think the difference is the sound and the way you can run more than one train on a track at a time with DCC.
Question:	Are the wheels plastic or metal.Thanks in advance
Answer:	The wheels are indeed plastic. My grandson doesn't play with it because it seems to have a hard time staying on track. Make me an offer and pay shipping and I'll send it to you!
Question:	what is smallest to largest scales
Answer:	Of the common scales: ZS has the widest turning radius (normally). HO and N are the cheapest to buy, and are most commonly used. HO is ~2x as large as N scale.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

THE STALLION Ready To Run Electric Train Set - N Scale: Galloping down the rails, The Stallion shows off its sleek lines as it races to the finish line. This spirited steed will be the champion of your N scale stable! This ready-to-run train set includes: F7-A diesel locomotive with operating headlight, gondola car, single-dome tank car, wide-vision caboose, 24" circle of snap-fit E-Z Track including 11 pieces curved track and 1 curved plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.

• Complete Ready To Run Freight Train Set
• Powered by a F7-A Diesel Locomotive with Operating Headlight
• Includes; Gondola Car, Single-Dome Tank Car, and Wide-Vision Caboose
• 24" Circle of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up

User questions & answers

Question:	Did anyone have trouble with the couplers? They do not go together as the directions say they do. I had to use a tweezer
Answer:	You must have not lined them up right. Went together no problem for Me.
Question:	How much table space would this set require
Answer:	We set it up on the floor for my grandson. It was about 6-8 ft diameter when completed!

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Bachman trains - Super Chief ready to run Electric train set - N scale. With the pride and power of a born leader, the mighty Super Chief Thunders along the rails. Spearheading the charge is an F7-A diesel locomotive with the Santa fe’s distinctive Red and silver “war bonnet” paint scheme. The N scale Super Chief ready-to-run set comes complete with: F7-A locomotive with operating headlight, box car, steel gondola, offset cupola caboose, 24" Circle of nickel silver E-Z track, power pack and speed controller, illustrated instruction manual

From the Manufacturer

SUPER CHIEF - N Scale Ready to Run Electric Train Set. With the pride and power of a born leader, the mighty Super Chief thunders along the rails. Spearheading the charge is an F7-A diesel locomotive with the Santa Fe’s distinctive red and silver "war bonnet" paint scheme. The N scale Super Chief ready-to-run set comes complete with, F7-A locomotive with operating headlight, steel gondola, box car, off-center caboose, 24" circle of nickel silver E-Z Track, power pack and speed controller.

• Complete Ready To Run Freight Train Set
• Powered by a F7-A Diesel Locomotive with Operating Headlight
• Includes; Box Car, Steel Gondola Car, Off-Set Cupola Caboose
• 24" Circle of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up

User questions & answers

Question:	is the transformer input 220V or 110V
Answer:	Mine is 110 plugs in in us current.
Question:	how large can you expand on this set
Answer:	As large as you have room for it. The power pack can probably handle about 200' of track.
Question:	How do I get the couplers to work? They won't stay coupled
Answer:	This scale doesn't have much leeway for error. If the track isn't perfectly flat and fastened down, the couplers can disengage. Use hot glue and a flat board to attach the track, and it should work.
Question:	Would it be good to set up under a Christmas tree
Answer:	It's very small for 3yr old to enjoy I would recommend a Lionel they have a whistle and a horn best of all the locomotive puffs smoke iv bought a Lionel from amazon earlier this year for 149.00 it's a g scale which is a nice size perfect under the tree very stable on carpet and will be a enjoyable experience for ur grandson

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Durango & Silverton Ready To Run Electric Train Set - N Scale. Built originally as a mining line, the scenic value of the Durango & Silverton was quickly recognized in passenger service. After surviving natural disasters, wars, and financial instability, a determined staff (and starring roles in several Hollywood movies) promoted the tourism that ensures the line's survival to this day. Now recognized as a National Historic Landmark and a National Historic Civil Engineering Landmark, the Durango & Silverton continues to provide year-round tourist service. Our N scale Durango & Silverton ready-to-run set comes complete with: 0-6-0 locomotive and tender, old-time combine, two old-time coaches, 34" x 24" oval of nickel silver E-Z Track, power pack and speed controller, illustrated instruction manual.

From the Manufacturer

Durango and Silverton - N Scale Ready to Run Electric Train Set. Built originally as a mining line, the scenic value of the Durango and Silverton was quickly recognized in passenger service. After surviving natural disasters, wars, and financial instability, a determined staff (and starring roles in several Hollywood movies) promoted the tourism that ensures the line's survival to this day. Now recognized as a National Historic Landmark and a National Historic Civil Engineering Landmark, the Durango and Silverton continues to provide year-round tourist service. Our N scale Durango and Silverton ready-to-run set comes complete with, 0-6-0 locomotive and tender, old-time combine, two old-time coaches, 34" x 24" oval of nickel silver E-Z Track, power pack and speed controller.

• Complete Ready To Run Old-Time Passenger Train Set
• Powered by a 0-6-0 Steam Era Locomotive with Tender
• Includes; Old-Time Combine Car, and Two Old-Time Coaches
• 34" x 24" Oval of Nickel Silver E-Z Track, Power Pack and Speed Controller
• N Scale 1:160
• Designed for Use by Experienced Hobbyist – Not Meant for Beginners
• Small Highly Detailed Components – For Consumers Ages 14 and Up
• NOTE: Refer to Instructional Video from the Image Section and the User Manual from the Technical Specification Before Use Which is Highly Essential.

User questions & answers

Question:	Is this a collectible? What justifies the price
Answer:	You can buy it anywhere, Amazon was best price. Its not a collectable, its just a fun western train
Question:	The description doesn't mention any buildings/people. Just checking if there is anything like that in this set? Thanks
Answer:	its just the train set - very nice looking.
Question:	Does this come dcc ready? that is can the board be changed to a dcc plug in board
Answer:	I bought this for my husband. He says no, it doesn't come dcc ready.
Question:	what is the radius on the curved track single piece 11.5 12 15 or 19 inches or
Answer:	It should be 11.5" radius.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Bachmann Trains TRAILBLAZER - N Scale Ready to Run Electric Train Set. As the West developed from desolate wilderness to bustling cities, it was trains such as the Trailblazer that spearheaded America's explosive growth from coast to coast. Our 60-piece Trailblazer set with its 4-6-0 locomotive lets you experience all the excitement of the Iron Horse's journeys through the crossroads of railroading history! This ready-to-run train set includes; 4-6-0 steam locomotive and tender with operating headlight, box car, gondola car, single-dome tank car, old-time caboose, 34" x 24" oval of snap-fit E-Z Track, train station, 24 railroad and street signs, 12 telephone poles, power pack and speed controller, illustrated instruction manual.

• Complete Ready To Run 60 Piece Freight Train Set
• Powered by a 4-6-0 Steam Era Locomotive and Tender with Operating Headlight
• Includes; Box Car, Gondola Car, Single-Dome Tank Car, Old-Time Caboose, Railroad Signs, Street Signs, and Telephone Poles
• 34" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up

User questions & answers

Question:	Does this come with steam sound effects? If not how can I add steam sound effects
Answer:	no and you would have to buy a engine with sound
Question:	Are the trains themselves plastic or die-cast metal
Answer:	plastic with metal wheels (and working light in front!). die cast would be too heavy at this size i imagine. i one to go around a mini christmas tree this last season. it was perfect.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Bachmann Trains SPIRIT OF CHRISTMAS - N Scale Ready to Run Electric Train Set. Good things come in small packages. This is certainly true when it comes to the Spirit of Christmas N scale set. Perfect for under-the-tree in a small space and festively decorated for a very Merry Christmas. This ready-to-run set features: 0-6-0 steam locomotive and tender, old-time combine car, two old-time coach cars, 34" x 24" oval of nickel silver E-Track including 11 pieces curved track, 4 pieces straight track, and 1 curved plug-in terminal rerailer, Power pack and speed controller.

From the Manufacturer

Good things come in small packages. This is certainly true when it comes to the Spirit of Christmas N scale set. Perfect for under-the-tree in a small space and festively decorated for a very Merry Christmas. This ready-to-run set features: 0-6-0 steam locomotive and tender, old-time combine car, two old-time coach cars, 34" x 24" oval of nickel silver E-Track including 11 pieces curved track, 4 pieces straight track, and 1 curved plug-in terminal rerailer, Power pack and speed controller.

• Complete Ready To Run Holiday Passenger Train Set
• Powered by a 0-6-0 Steam Era Locomotive with Tender
• Includes Holiday Decorated; Old-Time Combine Car, and Two Old-Time Coach Cars
• 34" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up
• Complete ready to run train set

User questions & answers

Question:	How tall are these cars
Answer:	About 1" tall 3" long Very nice train set. If you are going to use it under the Xmas tree it's very small. You would need G or Ho Scale and they have them in Amazon I saw them there. Type G or Ho scale in the white box up above and it will find it for you.
Question:	Can I add auto reverse track to each end of a straight layout
Answer:	You can, but in order to make it work without you having to manually reverse your engine, you will need to install a reversing module between your power supply and your terminal track.
Question:	DO the coach cars light up. Does the headlight on the locomotive light
Answer:	The coach cars do not light up. The headlight on my locomotive also does not light up.
Question:	Does anyone use it with the Department 59 Dicken's village
Answer:	I use it with a different smaller village set and it looks great. I think it would work with the Department 56 items. Some of my accessories are from Dept 56.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Every hobby begins with a single step; start off on the right foot with a Kato UNITRACK Starter Set. Each starter set comes with a complete oval of track, a Kato Power Pack, a locomotive, three cars, a re-railer and an instruction book on how to assemble and care for your new Starter Set. From then on, the sky's the limit thanks to UNITRACK's modular snap-track design. Build a complex basement layout, or keep it simple so that you can take it out in evenings; anything is possible with UNITRACK.

• Includes 1 x EMD F7A Santa Fe War bonnet locomotive and 3 x Super Chief corrugated passenger cars
• Contains a 4'x3' (1337mm x 677mm) loop of Kato UNITRACK with a re-railing crossing
• Includes a Kato 12V Power Pack that connects to the Kato UNITRACK loop with easy-to-use plugs for operating your trains
• Made in Japan

User questions & answers

Question:	Is this train set DCC
Answer:	It is not DCC ready, which was a disappointment as I was expecting modern technology. I ordered a DZ126 digitrax control system for the locomotive (after spending $200 for a DCC controller). The locomotive does not have a ready module you can buy and install. Instead, the module consists of 6 wires, each of which must be carefully soldered onto the dissasembled locomotive. So be warned. Not DCC. Not even remotely DCC ready.
Question:	My husband wants a Kato USA Model Train Products EMD F3A #21/#19 Late Type Santa Fe "Warbonnet" N Scale Train. Is that what's in this starter set
Answer:	Hello- Yes, exactly:Product Features: Includes 1 x EMD F7A Santa Fe War bonnet locomotive and 3 x Super Chief corrugated passenger cars Contains a 4'x3' (1337mm x 677mm) loop of Kato UNITRACK with a re-railing crossing Includes a Kato 12V Power Pack that connects to the Kato UNITRACK loop with easy-to-use plugs for operating your trains
Question:	Newby here. have heard kato is quality. does the loco run smooth at all speeds? is the set finicky about dust on the rails? thanks
Answer:	Kato equipment is top quality. The 2 Kato Locomotives I have both run smoothly from a crawl to full speed. The track has operated perfectly from the beginning.
Question:	Can this track be set up on a carpeted floor or does it need a hard surface
Answer:	These tracks are better made than any other but this set is N Scale, small size, and probably would not do well on the carpeted floor unless it is an industrial-type carpet.

Product description

Yard Boss Ready To Run Electric Train Set - N Scale. When there‘s freight to be moved, there‘s nothing like the raw power of a steam locomotive to get the job done. Our Yard Boss train set comes complete with Bachmann‘s exclusive E-Z Track snap-fit track and roadbed system. This set includes; 0-6-0 steam locomotive and tender, box car, quad hopper, wide-vision caboose, 24" circle of nickel silver E-Z Track including 11 pieces curved track and 1 curved plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.

From the Manufacturer

When there is freight to be moved, there is nothing like the raw power of a steam locomotive to get the job done.

• Complete Ready To Run Freight Train Set
• Powered by a 0-6-0 Steam Era Locomotive with Tender
• Includes; Box Car, Quad Hopper Car, and Wide-Vision Caboose
• 24" Circle of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Designed for Use by Experienced Hobbyist – Not Meant for Beginners
• Small Highly Detailed Components – For Consumers Ages 14 and Up

User questions & answers

Question:	Is engine plastic or metal
Answer:	Metal. The product and customer service (rude) is substandard. The owner does not stand behind their product.
Question:	What makes this set "for advanced enthusiasts" and similar priced ones age
Answer:	No idea I bought it as a first set for my son for Christmas he was 12 he did fine it may be more for ability to put the track together and ger the cars on the track right
Question:	Hello, I am interested in getting one of these New by any chance is there going to be a shipment of these set's within the next week
Answer:	Hello, We at Y2PLAY Stores have these in stock and ready to ship. Like all of the products that we sell, this item is NEW and in its original packaging. Thanks for your interest! Y2PLAY Stores 1-800-695-4808
Question:	Is this 1:87 scale
Answer:	It is N Scale, N scale is closer to 1:160

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Characteristics: -ToU 03 Formation, which began operation in May, 2017 is the prototype. -Shapes of the characteristic heading part, the newly mounted AU 737 cooler, the pantograph, and the rooftop equipment which differ from the former mass produced cars are precisely created. -The delicate gradation of line color designed on the front and around the door in yellow-green is precisely recreated. -Driver's cab is see-through which makes the front part more realistic. -SaHa E235-4600 series which was converted from E231-500 is included. For the conversion, an antenna pedestal has been added, and the air conditioner is made the same with other E235 series. -Head/taillight, front signs, operation number display can be lit. White LED is used. The headlight looks white even when it is off. -For front and side signs, "0913 G" "Yamanote-sen" are printed. "Shinagawa - Tokyo houmen" "Ikebukuro - Ueno houmen" signs are included as an option. -All the cars have wheelchair marks, buggy marks, and the emergency door cock mark printed. -Equipped with a power unit with a well-established flywheel. -Body mount tight couplers are used. -DCC friendly. -Cars in the basic set can be stored in the book case of Additional Set A (sold separately).

• N Gauge

User questions & answers

Question:	Does this set include a motorcar
Answer:	This product includes a power unit. The product description also has the following description. -Equipped with a power unit with a well-established flywheel.

Product description

Bachmann Trains REMOTE TURNOUT - RIGHT (1/card) - N Scale. Bachmann's exclusive E-Z Track system makes set-up quick, easy and fun. Nickel Silver Rail with Grey Roadbed. E-Z Track System - Snaps Together, Stays Together on Floors, Tables and Carpets.

From the Manufacturer

Bachmann's exclusive E-Z Track system makes set-up quick, easy and fun.

• Nickel Silver Rail
• Grey Roadbed
• E-Z Track System --Snaps Together, Stays Together on Floors, Tables and Carpets
• No nails, screws, or special tools needed
• N Scale Train Set
• Nickel silver rail with Gray roadbed
• Customize your layout

User questions & answers

Question:	Can you buy an extension of that green wire on the remote turnout switch
Answer:	Yes on Amazon just lookup bachmann turnout extension
Question:	Length of turnout
Answer:	Rail bed length of the stock rail on the straight route is 6 3/8".
Question:	How do you electrically isolate one section of Bachmann ez track from another section
Answer:	Use plastic rail joiners called isolator joiners
Question:	can you operate it manualy
Answer:	Yes, you can operate it manualy with the small mechanical switch in the left side of the turnout

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track'.
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In'. Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

The Broadway limited ready-to-run N scale electric train set. Pennsylvania railroad’s Broadway limited carried passengers in style between new York city and Chicago for over 40 years, Starting in 1912. Rather than new York city's famed thoroughfare, it was named for the railroads “broad way," four-track mainline. With three elegant Tuscan red cars pulled by a classic 4-6-0 steam locomotive, Bachmann Broadway limited set is ready to carry on Pennsylvania railroad’s grand tradition for your N scale passengers. This ready-to-run train set includes: 4-6-0 locomotive with operating headlight and tender, 60’ Combine car, 60’ coach car, 60’ observation car, 34" X 24" Oval of nickel silver E-Z track, power pack and speed controller, illustrated instruction manual.

• Complete Ready To Run Passenger Train Set
• Powered by a DCC 4-6-0 Steam Era Locomotive with Tender and Operating Headlight
• Includes; One 60' Combine Car, One 60' Coach Car, and One 60' Observation Car
• 34" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up

User questions & answers

Question:	Is this dcc or dc
Answer:	This is DC -Nicholas Smith Trains
Question:	Does this run on 220 /240V
Answer:	No, it is North American, USA, standard 110 alternating current with 2 prong plug.
Question:	What is the radius for the cruves in this set
Answer:	11.25
Question:	Is the engine dcc ready or on board
Answer:	This loco is DC only. -Nicholas Smith Trains

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

Thunder Valley Ready To Run Electric Train Set - N Scale. The rails rumble and the engine roars as the mighty Thunder Valley rounds the bend, hauling freight to destinations far and wide. This train set comes complete with Bachmann‘s exclusive E-Z Track snap-fit track and roadbed systems. The set includes; an EMD GP40 diesel locomotive with operating headlight, steel reefer, three-dome tank car, wide-vision caboose, 24" circle of nickel silver E-Z Track including 11 pieces curved track and 1 plug-in terminal rerailer, power pack and speed controller, illustrated instruction manual.

From the Manufacturer

The rails rumble and the engine roars as the mighty Thunder Valley rounds the bend, hauling freight to destinations far and wide. The Thunder Valley N Scale Ready To Run Electric Train Set is recommended for modelers ages 14 and up. This train set comes complete with Bachmann‘s exclusive E-Z Track snap-fit track and roadbed systems, plus: an EMD GP40 diesel locomotive with operating headlight, steel reefer, three-dome tank car, wide-vision caboose, 24" circle of nickel silver E-Z Track, power pack and speed controller, illustrated instruction manual. N Scale trains are designed to fit in small spaces (the size ratio is 1:160) the track must be placed on a flat surface for best performance. The advantages of N Scale trains are very small size allows more elaborate layouts, moderate cost, good detail, good support and availability of trains, and a nice variety. The disadvantages of N Scale Trains are; care must be taken as the product can be fragile, the small size can be hard to see, the cars can be hard to rerail. This product is recommended for modelers ages 14 and up.

• Complete Ready To Run Freight Train Set
• Powered by a EMD GP40 Diesel Locomotive with Operating Headlight
• Includes; Steel Reefer Car, Three-Dome Tank Car, and Wide-Vision Caboose
• 24" Circle of Nickel Silver E-Z Track , Power Pack and Speed Controller
• N Scale 1:160
• Recommended For Ages 14 & Up

User questions & answers

Question:	Will the power supply work with a HO train set
Answer:	Yes. But this set doesn't have the connections to power accessories. I bought a track switch and realized too late that I can't power it. Other sets by Bachman can. It works great for powering the train though, and it will power HO or N scale tracks.
Question:	Is this ho track
Answer:	The website says it should have track pieces.
Question:	What country is the power adapter for
Answer:	the United States of America.
Question:	Seriously ??!! Only 24" of track
Answer:	Just builds you a circular track. That's it.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track.'
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In.' Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

Product description

This powerful Lehigh Valley inspired set is ready to go on an adventure throughout the Northeast. Once referred to the Route of the Black Diamond, named from the anthracite it transported, this Lehigh Valley set is a great way to begin your model railroad journey.

• Set Includes: Lehigh Valley U36B diesel locomotive, Lehigh Valley Map boxcar, Lehigh Valley 2-bay hopper, Lehigh Valley caboose, Eight pieces of O36 curved FasTrack, Two FasTrack 10" straight track sections, One LionChief FasTrack Terminal section, One Plug-Expand-Play Power Lock-on section, Wall-pack power supply, LionChief remote for locomotive
• Locomotive Features: Electric locomotive controlled by included LionChief remote, LionChief Universal Remote (sold separately) or Bluetooth LionChief app, On/Off switch for sound, RailSounds RC sound system with steam chuffing and background sounds, whistle, bell, and useractivated announcements, Operating headlight, Two Powerful maintenance-free motor, Operating couplers, Illuminated cab interior
• Freight Car Features: Operating couplers, Opening doors on boxcar
• LionChief Remote Features: Forward and reverse speed control knob, Three buttons to horn sound, bell, and special announcements, Requires three AAA alkaline batteries (not included)
• Minimum Curve: O31 | Set Length: 43" | Recommended Age: 10 years +

User questions & answers

Question:	Is this o scale. And does it adjust speed for up grades and down grades
Answer:	Yes, this is O Gauge, however the speed with not automatically adjust going up and down grades. -Nicholas Smith Trains
Question:	Can you turn the engine sound off
Answer:	Yes. Two ways. Under the engine there is a slide switch to turn off rail sounds. See Manuel for location. Second, with blue tooth under settings reduce volume and with remote see Manuel for procedure.
Question:	Where is place of manufacturing
Answer:	Last I knew, China was where most of the manufacturing was taking place. I remember reading that some painting and assembly was taking place in North Carolina but I can’t be 100% sure.

Product description

All aboard for brand New adventures on rails! The Lionel trains Pennsylvania flyer ready-to-play train set is leaving the station on a non-stop run to fun. This electric RC locomotive set features a detailed and ruggedly built berkshire-style locomotive with working headlight, smoke, and sounds. The set includes a steam locomotive and tender, 3-domed tank car, boxcar, and caboose. Download the Bluetooth app to control you train from your phone, and prepare for non-stop adventure with the Lionel trains Pennsylvania flyer.

• Set Includes: 0-8-0 locomotive and tender, Three-dome tank car, Boxcar, Caboose, Eight curved O36 FasTrack track sections, one 10” straight FasTrack Plug-Expand-Play power lock-on section, one FasTrack terminal section, and two 10” straight FasTrack sections, 54W Wall-Pack Power Supply, LionChief remote for locomotive
• Locomotive Features: Electric locomotive controlled by remote or Bluetooth LionChief app, Operating headlight, On/Off switches for smoke and sound, RailSounds RC sound system with steam chuffing and background sounds, and useractivated whistle, bell, and announcements, Puffing smoke, Powerful maintenance-free motor, Operating couplers, Chuffing sounds in synch with puffing smoke
• Rolling Stock Features: Operating couplers, Opening doors on boxcar, Metal handrails and ladders on tank car
• LionChief Remote Features: Forward and reverse speed control knob, Three buttons for whistle sound, bell and special announcements, Requires three AAA alkaline batteries (not included)
• Minimum Curve: O31 | Set Length: 45" | Recommended Age: 10 years +

User questions & answers

Question:	Why won't the smoke work
Answer:	Yes, each section has 1 or 2 holes which go right through the plastic through which screws can be put through into wood or anything else underneath. Do not screw it down to solid as if the temperature goes up and down then the track expands and contracts and the track can be distorted. I find a screw here and there is enough.
Question:	can the tracks be secured to plywood
Answer:	The cars have a plastic top and a steel pressed chassis with metal wheels and axles. The tender is the same with the loudspeaker only in it. The locomotive has a die cast upper removable body. The chassis is a mixture of metal and composite plastic. All the electronics are in tge locomotive.
Question:	Is the engine die cast metal
Answer:	I recently bought one of these sets and it was made for the 2017 season. The associated books are copyright 2017. We are now in 2017 and it looks like Lionel do a Lioncheif extra for some models with more facilities on the remote and better announcements. However this works well and the bell,, whistle, and chuff work very well. The volume of the sound can be changed from the handset with even more changes possible on bluetooth. Bluetooth seems to only work on an i phone or android.
Question:	What year is this model? Is it the most current? There is another one listed for $227.99, what is the difference
Answer:	Good luck finding it, we never did. Ordered 3 of them, 2 for the grandkids. Set up ours before xmas and was VERY disappointed in it. I was told there was a switch, but could not find it. Could not keep train on the track. Thought the cars were very light and cheaply made. We returned all 3 sets. Asked others for their opinions, and they all thought it was pretty much junk. I was excited for this for the kids, but knew it was junk.