11 best escs for rc models
Electronic Speed Controllers (ESCs) are critical components in remote-controlled (RC) models, particularly in the realm of RC cars, boats, drones, and airplanes. These devices regulate the speed and direction of electric motors, allowing precise control over the model's movement. Here's what you need to know about ESCs for RC models:
Function: ESCs convert the electrical signals from the transmitter (remote control) into the appropriate voltage and current levels to drive the motor. They control the motor's speed, direction, and braking.
Types:
- Brushed ESCs: Used with brushed motors that have physical brushes to conduct electricity. These ESCs are simpler and less expensive.
- Brushless ESCs: Designed for brushless motors, which are more efficient and durable than brushed motors. Brushless ESCs are more complex but offer better performance.
Features:
- Forward/Reverse: Many ESCs for RC cars offer forward and reverse functions, allowing for greater maneuverability.
- Braking: ESCs can apply brakes to stop the motor quickly, which is crucial for precise control.
- Programmability: Some ESCs allow users to program various parameters such as acceleration, braking, and timing to suit specific applications.
- Voltage and Current Ratings: ESCs are rated for specific voltage and current ranges to match the motor's requirements.
Safety:
- Overheat Protection: ESCs often include overheat protection to prevent damage due to excessive heat.
- Low Voltage Cutoff: ESCs can cut off power to the motor when the battery voltage drops to a certain level to prevent over-discharging.
Compatibility:
- It's crucial to choose an ESC that is compatible with both the type of motor you're using (brushed or brushless) and the voltage and current requirements of your RC model.
Installation:
- ESCs need to be properly installed and connected to the motor, battery, and receiver as per the manufacturer's instructions.
Calibration:
- ESCs often require calibration to ensure that they respond accurately to the transmitter's input.
Maintenance:
- Regularly inspect and clean your ESC to prevent dirt and debris from affecting its performance.
- Ensure that the ESC is adequately cooled during operation to prevent overheating.
Programming and Tuning:
- Some advanced ESCs offer the ability to fine-tune settings to optimize your RC model's performance. This may involve adjusting parameters like throttle curves, timing, and braking force.
Upgrades:
- Upgrading your ESC can significantly improve the performance of your RC model. However, it's essential to choose an ESC that matches the capabilities of your motor and other components.
In summary, Electronic Speed Controllers are essential components for RC models, providing precise control over motor speed and direction.Choosing the right ESC and properly maintaining it is crucial for optimal performance and the longevity of your RC vehicle or aircraft.
Below you can find our editor's choice of the best escs for rc models on the market
FPVDrone CF2822 1200kv Motor with Prop Saver+ 30A BLheli ESC + SG90 Servos + 8060 Propeller for RC Plane Airplane
Product description
Brushless Motor CF2822 for Airplane
No. Of cells: 2-3 Li-Poly
RPM/V (kv): 1200
Max. efficiency: 82%
Max. efficiency current: 7 -16 A (>75%)
No load current / 10 V: 0.9 A
Current capacity: 16A/60s
Max Thrust 740g/26oz
Max Watts 203W
Internal Resistance: 0.15 ohm
Stator Dimensions: 22x10 mm
Shaft diameter: 3 mm
Recommended model weight: 300 -800 g
Recommended prop without gearbox: 8-10 inches
30A BLheli ESC :
Continuous / peak current: 30A
Number of battery sections: 2-3S LiPo
BEC output: linear mode: 5V, 2A
Power cord: red -16AWG-100mm*1; black -16AWG-100mm*1
Output line: 190mm
Power plug: T Plug (can be customized according to requirements)
Output plug: 3.5Mm bananer connect (female) SG90 servo parameters
Size: 21.5mmX11.8mmX22.7mm
Weight: 9 grams
No load speed: 0.12 sec / 60 deg (4.8 V)
Stall torque: 1.5-1.7kg/cm (4.8V-6V)
Operating temperature: -30+60 degrees Celsius
Dead zone setting: 5 microseconds
Working voltage: 4.8V-6V
Recommended model: Mini car, mini ship, helicopter, airplane
Package Include:
1 X CF2822 1200kv Brushless Motor
1 X 30A Brushless ESC
2 X 8060 Propellers
2 X SG90 Servos
- Brushless Motor; Model : CF2822 ; KV : 1200KV.
- SG90 9G Micro Servo Working voltage: 4.8V-6V.
- 30a BEC output: linear mode: 5V, 2A,Battery sections: 2-3S LiPo.
- Suitable for RC Glider Quadcopter Helicopter Aircraft Copter Multi-copter.
- You will get:1 X CF2822 1200kv Brushless Motor, 1 X 30A Brushless ESC, 2 X 8060 Propellers, 2 X SG90 Servos
User questions & answers
| Question: | What battery should I use with this |
| Answer: | the marbles come with the puzzle |
| Question: | How many grams does the motor weigh |
| Answer: | It varies - more or less 0.5 mm to 1 mm. I needed a press fit so I drilled one out until it was a tight fit on the shaft. |
| Question: | It’s enough for 1600mm half balsa half foam plane ? It’s like sport cubs but kind big. If not which one would you recommend for me ? Thanks |
| Answer: | No |
| Question: | What motor esc combo do i order? I want to use 4cell lipo and 12x6 prop |
| Answer: | Nylon? |
FPVDrone 5A ESC Brushed Speed Controller Dual Way Bidirectional ESC 2S-3S Lipo for RC Model Boat/Tank 130 180 Brushed Motor Spare Parts(4PCS)
Product description
specification:
Product Name: Dual-way Brushed ESC
Power supply: 6v-14v，one way 5A，Max 7A （can use in 2/3S lipo,cannot use 4S）
Output current: 5A x 2
Mode can be adjusted: mixed/independent
Above 5A will burn out the ESC, 130, 180 brush motors are recommended
Package:
1PC x ESC
- Dual-way 5A Brushed ESC support 2S-3S Lipo.
- Suitable for 1/35 RC model cars,tanks,4WD RC cars.
- Small size with built-in capacitor module.
- The strong resistant current capability, excellent heat dissipation.
- Multiple protections: Throttle signal loss protection/Out of control.
User questions & answers
| Question: | Is this a one channel or a two channel esc? i see the yellow wire, but do not know if that was for another channel |
| Answer: | This is not a internally programmable type servo. Travel adjustments, exponential, etc, is done at the radio. Your radio feature set will determine what is actually settable. The control angle for this servo is 180 degrees. 90Deg left and 90Deg right from center. |
| Question: | How is the direction and speed controlled? Is there a calibration process |
| Answer: | Yes, it is absolutely perfect for Volcano EPX! I bought one, and I was very impressed with the speed and torque, so I bought another one. I run a ARRMA KRATON 6S BLX and they are the perfect combination of power and reliable response!! |
| Question: | What is the max Voltage? Operating Voltage |
| Answer: | Hi, this model can be assembled smoothly without any glue. |
| Question: | I need to add two of these two a rc semi truck, it already has an esc. so to add two of these would i need to pull the middle receiver wire |
| Answer: | Hi, sorry for the inconvenience with the light kit. We are glad to send a new replacement for you, could you please contact us by "Ask a Question" or email? Thank you very much! |
RC Car ESC, Brushless Speed Controller, 120A Splash-proof 6S 24V ESC RC Model Car for 1/8 RC Car(Feeling XT60)
Product description
Feature:
Excellent start-up, acceleration and linearity features. Good heat dissipation performance ensures maximum work efficiency. Strong resistant current capability, good waterproof performance. Compatible with sensor / sensorless brushless motor. Applied to model car, model boat, electric skateboard. Especially suitable for 1/8 RC car truck.
Specification:
Material: ABS
Weight: 153g/5.4oz
Item Type: Brushless 120A ESC
Model: Sensor XT60, Sensorless T-type (Optional)
Waterproof Level: Splash-proof
Continuous Current Output:120A, crest current up to 640A
Input Voltage: 2-6SLipo/5-18S Nimh
SBEC Output: 6V / 3A
Size: 56*38*32mm/2.2*1.5*1.3inch
Computer adjustment parameters are as follows:
1: TURBO function) : 0 3 6 9 12 15 18 21 (factory default)
Very low, low, medium, high, very high
2: Starting acceleration: low, medium and high (factory default)
3. Operation mode:
Forward: this mode does not reverse and is usually used for racing activities.
Front and reverse brake: factory default, this mode is usually used for practice
4: Braking force ratio: 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% (factory default)
5: Drag brake force ratio: 0%, 4%, 8%, 12%, 15%, 20%, 25%, 30% (factory default)
6: low voltage off value
7: Forward working output power ratio: 20%, 40%, 60%, 80%, 1000% (factory default)
8: Reverse working output power ratio: 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% (factory default)
9: Motor steering: select the direction of motor rotation. (factory default)
10: Natural throttle width: 3%, 5%, 7%, 9% (factory default)
11: battery/Nimh battery mode selection
Package List:
1 x 120A ESC
- Excellent start-up, acceleration and linearity features.
- Strong resistant current capability, good waterproof performance.
- Good heat dissipation performance ensures maximum work efficiency.
- Compatible with sensor / sensorless brushless motor.
- Applied to model car, model boat, electric skateboard. Especially suitable for 1/8 RC car truck.
Motor Cooling Fan RC Model Heatsink 28000RPM ESC Cooling Fan for RC Car 1/8 1/10 1/12 Scale 540 550 Brushless Motor (Black+Red)
ARRAROWN
Product description
Motor Cooling Fan RC Model Heatsink ESC Cooling Fan for RC Car 1/8 1/10 1/12 Scale 540 550 Brushless Motor
Features:
1. Small size and lightweight, convenient for you to install and remove.
2. Perfect heat dissipation effect which can effectively prevent the motor from overheating.
3. With high quality material and exquisite workmanship, this cooling fan is durable for long term use.
4. The cooling fan can power up from the receiver, very easy to use.
5. Designed for RC model car 1/8scale, 1/10scale, 1/12 scale 540 550 brushless motor.
Specifications:
Item Name: RC Motor Cooling Fan
Item Type: RC Accessory
Material: Aluminum Alloy / Plastic
Optional Color: Red + Black
Size: 30 * 30 * 10mm / 1.18 * 1.18 * 0.39inch
Weight: Approx. 18g / 0.53oz
Voltage: 5-8.45V
Input Current: 1.5A
Max. RPM: 28000
Cable Length: Approx. 18cm / 7.09inch
Note:
1.The wiring has positive and negative levels, and the wrong connection will not work.
2.Please allow slight deviation for the color and measurement. Thanks for your understanding.
Package Including:
1 * Motor Cooling Fan for 540 550 Motors Black + Red
- ▶【RC Car 540 550 Motor Cooling Fan】 Designed for RC model car 1/8scale, 1/10scale, 1/12 scale 540 550 brushless motor and esc.
- ▶【Prevent Motor From Overheating】 The speed can reach up to 28000 RPM, excellent heat dissipation effect to protect the motor.
- ▶【Exquisite Workmanship】 Made of high quality material, exquisite workmanship make this cooling fan is durable for long term use.
- ▶【Unique Appearance Design】 Heatsink is black body with cool red patterns and lines, simple and cool.
- ▶【Easy to Install】 Esc cooling fan compatible with all brackets with 24mm mounting holes. Notice: the wiring has positive and negative levels, and the wrong connection will not work.
User questions & answers
| Question: | Will this fan fit traxxas slash 4x |
| Answer: | No, it does not shoot. There are several sites where you can learn to build your own Battleship out of balsa wood and put air cannons on them. |
| Question: | How is the quality for this mini fan |
| Answer: | The battery last for less than two hours. The guns are just detail and they are not operational. I am not sure about the purchase of batteries at the store. |
| Question: | What's the size for this rc car motor cooling fan |
| Answer: | i purchased one it didnt work properly i bought a second one it worked i removed the torpedo tubes and replaced them with 1/350 scale italeri ar-196 seaplanes as on real bismarck i then painted and made it a close replica of the real bismarck not real stable turning but everytime i play with it it draws a crowd. |
| Question: | How is the esc fan work |
| Answer: | The flying sub actually had 2 futuristic rocket type engines powered by a nuke reactor! It would depart from the bottom of the Seaview submarine maneuver like any other sub . To get some place faster it would then rise to the surface and jet right off into the sky! This show is from the early 60s when things were more positive and we were on our way to the moon!! You might want to watch Voyage to The Bottom of the Sea. The flying sub does not appear until the 2nd. or third season I think. have fun with it !! FOLLOW UP!!I didn't know that you were asking about a model not the show. No thiese models are display only I did light mine DOES NNT FLY OR GLIDE:) |
fuwinkr Brushless ESC Electric Speed Controller Waterproof Dustproof Brushless ESC Electronic Speed Controller for 1/10 RC Car Model(（120A）)
Product description
Specification:
Condition: 100% Brand New
Item Type: ESC
Material: Electronic components
45A ESC:
Continuous Current: 45A
Burst Current: 180A
Adapter Battery: 2-3S lithium battery / 4-9s Nickel-hydrogen nickel-cadmium battery (note not with batteries)
BEC Output: 5.8V / 3A
Power Plug: T plug male
Motor Plug: 4mm banana plug female
60A ESC:
Continuous Current: 60A
Burst Current: 320A
Battery: 2-3S lithium battery / 4-9s nickel-hydrogen nickel-cadmium battery
BEC Output: 5.8V / 3A
Power Plug: T plug
Motor Plug: 4mm banana plug female
80A ESC:
Continuous Current: 80A
Burst Current: 480A
Battery: 2-3S lithium battery / 4-9s nickel-hydrogen nickel-cadmium battery
BEC Output: 5.8V / 3A
Power Plug: T plug male
Motor Plug: 4 mm banana plug
Size: Approx. 43 x 31 x 32mm / 1.7 x 1.2 x 1.3in
120A ESC:
Continuous Current: 120A
Burst Current: 480A / 10SEC
Battery: 2-3 seconds lithium battery / 4-9 seconds nickel metal hydride battery
BEC Output: 5.3V / 5A (switch mode)
Power Plug: T male
Motor Plug: 4mm banana plug female
Size: Approx. 43 x 31 x 32mm / 1.7 x 1.2 x 1.3in
Package List:
1 x ESC
1 x Manual
- A VARIETY OF FUNCTIONS : The proportional brake has 4 stages of maximum braking power adjustment and 8 stages of drag braking power adjustment.
- ONE-CLICK SETTING : One‑click settings (SET button on ESC) can easily reset all parameters to factory default settings.
- MAINTENANCE : Please clean and dry as soon as possible after use to avoid the connector rusting.
- APPLY TO : Waterproof and dustproof for all weather races. Remove the cooling fan before using the ESC in water.Portable digital LED program card compatible with optional equipment, especially suitable for outdoor use.
- RISK FREE : We know the importance of product quality to you, so if you have any dissatisfaction with the wisdom of the product you buy, please contact us for exchange or refund.
Taidda RC Motor ESC Set, Surpass 3300KV 2435Motor & KS25A Waterproof Brushless ESC Combo Set for RC Model Car for All 1/16, 1/18 Brushless Vehicles
Taidda
Product description
Features:
1. 25A ESC also features enhanced throttle response, excellent acceleration, powerful disconnect and throttle linearity.
2. CNC machine tool processing billet, 6061-T6 aluminum heat sink, secondary oxidation treatment, high-end and fine appearance.
3. High purity copper coils, maximizing efficiency, heat resistance of 180-200 °.
4. ABEC5 super durable sealed bearing with high rotation speeds, low friction, low noise, high precisions and long service life.
5. Universal, suitable for all 1/16, 1/18 brushless vehicles - for multimount systems of M3 + M2.5 screws.
6. Ultra-thin silicon steel sheet: excellent performance, high magnetic conductivity, high silicon content, good insulation and heat resistance.
7. Precisions waterproof motor design, maximum power conversion.
Specification:
Material: Metal and electronic components
Color: As Pictures Shown
Weight: Approx. 128g
#Motor
Model: 2435
KV: 3300KV
# ESC
Model: 25A
Continuous/maximum current: 25A/100A
Compatible Motor: Sensorless Brushless Motor
For 2S Lipo or 6cells NiMH:
1. On-road: 24XX-size or smaller engine with the KV <7200
2. Off-Road Vehicle: 24XX-size or smaller engine with the KV <4800
Applicable models: 1/20, 1/18, 1/16RC car
Resistance: 0.0014ohm
Battery: 2 cells Lipo , 4 - 6 cells NiMH
BEC output: 5.0 V / 2A (Analogue mode)
Size: 40 * 32 * 15mm/1.6 * 1.3 * 0.6in
Package List:
1 * Motor
1 * ESC
2 * Manual
- Brushless Motor , Precisions balanced rotor with high stability, can achieve the best reliability of the motor motor with 4 poles 12 slots high torque motor design.
- RC Motor ESC Set, High balance explosion-proof rotor, high smoothness, high accuracy and highspeed, dynamic balance control within 10mg, and later can be removed and replaced.
- RC Waterproof Brushless ESC, CNC machine tool processing billet, 6061-T6 aluminum heat sink, secondary oxidation treatment, high-end and fine appearance.
- RC Brushless Motor ESC, ABEC5 super durable sealed bearing with high rotation speeds, low friction, low noise, high precisions and long service life.
- 3300KV 2435Motor, High purity copper coils, maximizing efficiency, heat resistance of 180-200 °.
Yosoo Health Gear RC Car ESC, RC Model ESC, 20A Brushed PCB Electronic Speed Controller with Brake for RC Car Boat Crawler Remote Control Vehicle Model Accessory
Product description
Features:
1. This 20A brushed motor ESC can be used for RC car / boat.
2. With functions of forward, backward and brake.
3. The constant current is 20A and maximum current is 25A.
4. High precision manufacturing ensures stable performance and excellent function.
5. It can work with 130 / 180 / 260 / 280 / 380 brushed motor.
Specification:
Condition: 100% Brand New
Item Type: RC Accessory
Material: PCB + Rubber
Color: Red + Black
Size: Approx. 35 * 22 * 6mm / 1.38 * 0.87 * 0.24inch
Weight: Approx. 14g
Applicable Product: for RC Car, RC Boat, RC Tank
Function: Forward, Backward, Brake
Working Voltage: 3.0V-9.4V
Constant Current: 20A
Maximum Current: 25A
Pulse Current: 50A
Input: Li-Po 2S / Ni-Mh / Ni-Cd 4-7 Cells
Driver Frequency: 2KHz
Brake On / With Brake
Package List:
1 * 20A ESC
- [Electronic Speed Controller]: This speed controller with brake has the functions of forward, backward and brake
- [Specification]: Working voltage 3.0V-9.4V; Constant current 20A; Maximum current 25A; Pulse current 50A
- [Widely Application]: This rc accessory is widely used for RC car, RC boat, RC tank, RC crawler, remote control vehicle model
- [Fitment]: The 20A brushed ESC can work with 130 / 180 / 260 / 280 / 380 brushed motor; Size 35x22x6mm/1.38x0.87x0.24inch
- [Friendly Service]: "Contact Seller" if you need any help; We are right here 24/7 anytime you need; Remember that we are just a mail away
wosume 【𝐁𝐥𝐚𝐜𝐤 𝐅𝐫𝐢𝐝𝐚𝒚 𝐋𝐨𝒘𝐞𝐬𝐭 𝐏𝐫𝐢𝐜𝐞】 Waterproof Black 60A 50x35x32mm RC Brushless ESC, Electric Speed Controller, for RC Car Model TRX4 SCX10 1/10(T Plug)
Product description
Feature:
1. Support program card for adjustment, wonderful RC car model accessory.2. Enhanced throttle response, excellent acceleration, strong braking and throttle linearity.
3. Waterproof, suitable for all conditions of the race, reliable and durable in use.
4. Multiple protection functions: low voltage cut off protection, overheat protection, throttle signal loss protection.
5. 60A Waterproof brushless ESC, special designed for SCX10 1/10 RC car model.
Spec:
Condition: 100% Brand New
Item Type: ESC
Material: Plastic
Color: Black
Size: Approx. 50 x 35 x 32mm / 2 x 1.4 x 1.3in (without switch and cable)
Continuous Current: 60A
Burst Current: 320A
Suitable Battery: 2-3S lithium battery / 4-9s nickel-hydrogen nickel-cadmium battery
BEC Output: 5.8V / 3A
Motor Plug: 4mm banana plug female
Fitment: Fit for 1/10 RC Car (Such as for SCX10/ for TRX4, etc.)
Package List:
1 x ESC
1 x Manual
- Enhanced throttle response, excellent acceleration, strong braking and throttle linearity.
- Support program card for adjustment, wonderful RC car model accessory.
- 60A Waterproof brushless ESC, special designed for SCX10 1/10 RC car model.
- Multiple protection functions: low voltage cut off protection, overheat protection, throttle signal loss protection.
- Waterproof, suitable for all conditions of the race, reliable and durable in use.
FPVKing Dual Way Bidirectional Brushed ESC 2S-3S Lipo 5A ESC Speed Control for RC Model Boat Tank 130 180 Brushed Motor Spare Parts
Product description
Specification:
Item name: 2 channel two-way brushed ESC
Power supply: 2s / 3s lithium battery(can not use 4s)
Output current: 5A x 2(above 5A will burn out the ESC)
Mode can be adjusted: mixed/independent
Description:
- Recommended motors: 130, 180 brush motors(not in package).
- The ESC can be go forward and backward.
- Dual mode switch switching: It can adjust the differential turn of the two motors, or control the forward and reverse of 2 motors separately.
- In the mixed control mode, can make a double-motor differential turn boat, tucker, tracked vehicle, etc.
Please Note:
1. It can not use 4s battery.
2. Above 5A will burn out the ESC.
3. If there is any problem, please be free to contact with us.
Package Included:
1pc dual way 5A brushed ESC
- 【Application】: Suitable for 1/35 RC model cars,tanks,4WD RC cars.
- 【Please Note】: Above 5A will burn out the ESC, 130, 180 brush motors are recommended.
- 【Adjustable Mode】: Mixing / independent(white switch; outward independent / inward mixing).
- 【Excellent Performance】: Small size with built-in capacitor module, with strong resistant current capability and good heat dissipation.
- 【Multiple Protections】: Throttle signal loss protection; out of control protection; overcurrent protection; overheat protection(130 degrees).
User questions & answers
| Question: | It only seems to work in mixed mode. I can't get it to go into indendent. Any suggestions? I have flipped the switch |
| Answer: | No, the description is wrong as I believed the same thing and purchased this. All to find out that the crankshaft side will only fit an 1" shaft. They did not include any adaptors to change the size so unless you have a 1" to 5/8" keyed adaptor, this will not work. |
| Question: | do you need a reciever with this esc |
| Answer: | Dear，yes,it is |
| Question: | Can I use a 11.1 volt LiPo battery |
| Answer: | This item can be worked with OE #203785 203788 chain.Thank you! |
| Question: | How can I tell if a motor is 130 or |
| Answer: | Yes, it fit your vehicle. Thank you |
Hobbypower 60A SL V2 Tamiya Plug Brushless Speed Controller ESC for RC 1/10 1/12 Model Racing Car Truck
- Compatible with all sonsorless brushless motor.
- Excellent start-up, acceleration and linearity features.
- Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo. (Note: we only recommend 2s battery! )
- Output: Continuous current 60A, burst current 380A.
- BEC Output: 6V/1.5A.
User questions & answers
| Question: | is this esc waterproof |
| Answer: | Yes. It is Plywood. I stained mine in blue and green use a water-based stain and it’s stunning!! I would highly recommend staining this STEM model kit. |
| Question: | What size are the leads For the motor |
| Answer: | I love that it comes with a battery or solar power option. I keep 3D marble run wooden puzzle near window and the sunlight makes it work. The solar panel works as long as you have a whole lot of sunlight! If you put it indoors without sunlight, you need buy two batteries. I hope this could help you ! |
| Question: | Does this work with the HobbyWing program card |
| Answer: | This is a great STEM Toys.Everything is included including wooden puzzle, a solar panel,a motor, 3 marbles marble, a battery case, a brush,a sandpaper,a English detailed instructions and happiness to make your own engineering model kit. |
| Question: | Are the Motor plugs: 3.5 mm or 4mm banana plug female |
| Answer: | Awesome engineering project for kids.I purchased this marble run kit for my ten years old son. He is very happy to have it.It's relatively easy to assemble. My son followed the manual to complete this science project and took it outside. I will highly recommend it buy it for your kids and very good present for growing kids. Hope it helps you. |
| Question: | Does this kit have a remote and receiver |
| Answer: | Marble Run Series: LG501/LG502/LG503/LG504,they look different and their track are different, when you buy it, you can click corresponding main picture to make make a distinction. And in the description, we also put one "MARBLE RUN COLLECTION", 4 types are all together for your reference. |
LAEGENDARY 1:10 Scale RC Cars Replacement Parts for Legend Truck: Motors Attached to ESC - Compatible with Legend Model with LED Lights
Product description
PART NUMBER: Motors LG-DJ01 attached to ESC LG-ZJ07B in your LEGEND user manual; compatible with LEGEND truck NEW MODEL with LED lights EASY TO SET-UP: Excellent acceleration and linearity features, strong resistant current capability, good heat dissipation. SAFE DESIGN FEATURE: Low voltage cut-off protection / over-heat protection / throttle signal loss protection. QUALITY GUARANTEE: Brand new, durable and practical for long term use ORIGINAL ACCESSORY: Replacement part for LEGEND RC car
- PART NUMBER: Motors LG-DJ01 attached to ESC LG-ZJ07B in your LEGEND user manual; compatible with LEGEND truck NEW MODEL with LED lights
- EASY TO SET-UP: Excellent acceleration and linearity features, strong resistant current capability, good heat dissipation.
- SAFE DESIGN FEATURE: Low voltage cut-off protection / over-heat protection / throttle signal loss protection.
- QUALITY GUARANTEE: Brand new, durable and practical for long term use ORIGINAL ACCESSORY: Replacement part for LEGEND RC car
User questions & answers
| Question: | We have purchased 4 of the vehicles. Within two weeks the rear differentials went out on two of them. The parts are not available on the website |
| Answer: | After Assembly，it is 11.4*4.4 *4.4 in.This motorcycle wooden model is really fun. The quality is high.I recommend it highly for anyone interested in 3D wooden puzzle. |
| Question: | Hi i have a split in the wire that goes to servo.would i need new speed controller |
| Answer: | Hi there. Nop!!! |
| Question: | Will this fit a horizon ecx amp mt |
| Answer: | Nop y es pequeño |
| Question: | I am left handed. Is it possible to purchase a transmitter with steering knob mounted on left side of unit |
| Answer: | Yes, the tires for our 1/64 scale diecast models are rubber |
Latest Reviews
View all
Massagers For Hands
- Updated: 28.03.2023
- Read reviews
Electric Aroma Diffusers
- Updated: 05.03.2023
- Read reviews
Fender Studio Monitors
- Updated: 19.06.2023
- Read reviews
Pasty Brushes
- Updated: 18.06.2023
- Read reviews
Dewalt Pole Saws
- Updated: 25.06.2023
- Read reviews