10 best bernzomatic propane torchs

Product description

Applications For best results, use with MAP Gas. Features Pressure regulated for consistent performance when inverted or used in adverse weather conditions.Cast aluminum body construction for durability.Fracture groove enhances safety in case torch is dropped.Run-lock button keeps torch lit for continuous use.Trigger on/off for simple one-handed operation.Swirl flame provides a hot, efficient flame.

• Pressure regulated for consistent performance when inverted or used in adverse weather conditions.
• Cast aluminum body construction for durability.
• Fracture groove enhances safety in case torch is dropped.
• Run-lock button keeps torch lit for continuous use.
• Trigger on/off for simple one-handed operation.

User questions & answers

Question:	Does it let out propane when you hold the trigger down slightly or do you have to turn a knob to activate the fuel
Answer:	Original poster is right. One time says 80 max lumens. Elsewhere says 100 max lumens. No straight forward information. Guess I’ll keep looking.
Question:	Can you use propane with this torch
Answer:	Yes, this light would be fine in the snow.
Question:	Does this have separate orifices for mapp and propane? I have an older model that does and can only find the propane orifice
Answer:	I don't know. I only use it during hurricane season, and I change the battery every year, so the battery has never died. Check with the seller or with Energizer.
Question:	Will this attach to a Coleman 1lbs Propane Cylinder
Answer:	Yes it is easy. Just unfold the strap holder and slide the cover clip
Question:	It’s 19.9 pounds
Answer:	i think this particular midel comes only in the green. A much less expensive model (without the red light) and just two settings of brightness comes in a beautiful blue color. That one is my go-to headlamp for most ordinary purposes.
Question:	Can this be used to heat glass
Answer:	Not since I purchased it.
Question:	is this propane
Answer:	That all depends on the types of batteries you use. The supplied batteries lasted me about 3-4 days. That's 5 hours a day or so is my guess. But with this type of device, unless you own stock in Energizer, you use rechargeables in them. I use 1,100 mah nimh in mine. For that you will get an average of 2-3 days easy before the light level runs down to far to be useful. I'd invest in some high quality rechargeables if I was you. At least 1,000 mah to be honest. Them 850 mah ones you get at most 2 days from them. So go for at least 1,000 mah rechargeables. But as I said it all depends on the battery type (not all batteries are made equally, even in the same class-so ur experience may vary) and the amount of hours used. But generally, you should get about 3 days out of the batteries, which isn't bad for this type of device. The LED's on it are pretty efficient.
Question:	Is it pre filled with gas
Answer:	Not that I’m aware of you may be able to ring each phone as each set is registered to ext 1-12

Product description

' Trigger Start Hose Torch, Hose Torch, Series BZ8250, Ignitor Piezo, Fuel Propane/MAP-Pro, Flame Type Swirl, MAPP Btus per Hour 11000, MAPP Temp. 3600, MAPP Gas Soft Solder 1/4 to 4 In., Propane Btus per Hour 12000, Propane Gas Soft Solder 1/8 to 3 In., Propane Temp. 3400, Soft Solder Tube Cap. 1/4 to 4 In., Characteristics Trigger Start Ignition, Adjustable Flame, Continuous Run Lock, Application Soft Soldering, Brazing And General Heating '

• Price For: Each Propane Temp.: 3400 Degrees F Characteristics: Trigger Start Ignition, Adjustable Flame, Continuous Run Lock Application: Soft Soldering, Brazing And General Heating Includes: 5 Foot Hose Torch, Fuel Holster, Does NOT Include Tank Item: Trigger Start Hose Torch Type: Hose Torch Series: BZ8250HTKC Ignitor: Piezo Fuel: MAP-Pro/Propane Flame Type: Swirl
• MAPP Btus per Hour: 11, 000 MAPP Temp.: 3600 Propane Btus per Hour: 12, 000 MAPP Gas Soft Solder: 1/4" to 4" Soft Solder Tube Cap.: 1/4" to 4" Propane Gas Soft Solder: 1/8" to 3" Country of Origin (subject to change): United States

Product description

'Torch Kit, Trigger-Start, Series KC3500, Ignitor Trigger-Activated, Fuel Propane, Head Round, Length 12-1/4 In., Flame Type Adjustable, Propane Btus per Hour 225,000 to 375,000, Propane Gas Silver Braze 2 In. to 3 In., Propane Gas Soft Solder 2 In. to 3 In., Propane Temp. 3450 Degrees F, Silver Braze Tube 1-1/4 In., Characteristics Ergonomic Comfort Grip, Adjustable Flame, Application All Kinds of Brazing, Soft Soldering and Heating Applications, Includes 14.1oz Propane Fuel Cylinder'

• Price For: Each Application: All Kinds of Brazing, Soft Soldering and Heating Applications Silver Braze Tube: 1-1/4" Ignitor: Instant On/Off Fuel: Propane Head: Round Flame Type: Adjustable Propane Temp.: 3450 Degrees F Propane Btus per Hour: 225, 000 to 375, 000 Length: 12-1/4" Country of Origin (subject to change): United States

User questions & answers

Question:	Does the flame stay or do you need to hold the trigger
Answer:	Yes. You can purchase a longer cord anywhere else.
Question:	how heavy is this
Answer:	Depends on the brightness that you need. Higher the lumens the brighter the light.

Product description

The Bernzomatic 19425 JT850 Self-Igniting 20, 000 BTU outdoor torch (DISCONTINUED by manufacturer) is specifically designed to produce a high-output flame for a wide variety of outdoor uses. you can use this torch to burn off weeds and leaves, start barbecues and campfires, control insects, melt ice from walkways, or patch asphalt cracks. This torch burns propane or map Gas and features an integrated trigger-start mechanism for quick flaming and an adjustable flame control knob.

The BernzOmatic JT850 trigger-started outdoor torch is specifically designed to produce a high-output flame for a wide variety of outdoor uses. You can use this torch to burn off weeds and leaves, start barbecues and campfires, control insects, melt ice from walkways or patch asphalt cracks. This torch burns propane or mapp gas, and features an integrated trigger-start mechanism for quick flaming and an adjustable flame control.

• HIGH OUTPUT – Produces large flame. Flame control valve easily sizes flame and extinguishes when finished.
• MULTIPLE USES –Perfect for weed control, starting barbecues, melting ice and other outdoor jobs. Uses propane or MAPP gas.
• ADJUSTABLE – Adjust flame control to fit each job. 36-inch reach for easy access with less bending or crouching.
• QUICK START –Integrated trigger-start mechanism produces flame quickly.
• MADE IN USA –Manufactured in the United States.

User questions & answers

Question:	can you get a replacement igniter
Answer:	It fits standard 20lb propane tank no adapters needed, thanks.
Question:	Is this all inclusive or what else is required, the tank, connectors, etc. Please give details to have a finished product. Thanks
Answer:	Our factories are all over the world, and products sold in the U.S. are usually manufactured and processed in Canada, Mexico or China.
Question:	What other parts do I need to make this work right out of the box. What type propane/coupler etc? Anyone want to help? Thanks
Answer:	Maximum flame length 28 inches
Question:	Why was this "Discontinued by Manufacturer
Answer:	You would need an adapter. Out of box it fits a 20lbs tank

Product features

Lawn and Garden Torch

Tackle a variety of outdoor tasks including chemical-free weed control, lighting fire pits, and repairing driveway cracks without bending and crouching.

Features

• Trigger-start ignition easily ignites the flame
• Flame Type: Brush
• 36-inch reach for less bending or crouching
• Adjustable flame knob extinguishes flame when finished
• Slip-resistant grip handle
• Durable solid brass tip
• Compatible with 14 or 16 oz propane fuel

Product description

189-Bz8250ht dimensions: -overall height - top to bottom: 13.7 -overall length - Side to side: 10.8 -overall depth - front to back: 4 -Overall product weight: 1.5

From the Manufacturer

The Bernzomatic BZ8250HT Trigger-Start Hose Torch is ideal for high heat applications in tough to reach spaces. With a 5 foot hose, the torch provides the user with maximum reach to make any job easier. The kit comes with the torch and attached 5 ft hose as well as belt holder for the fuel. With the fuel being attached to your belt, the weight of the torch in your hand is significantly reduced making repetitive use and over head work significantly easier and reduces fatigue. The torch features an Instant on/off trigger igniter for simple one-handed operation and a High intensity swirl flame that targets heat output and provides a hotter, more efficient flame. The torch also has an adjustable flame control knob for ease in switching between different applications. The BZ8250 works with both Propane Fuel and Max Power Propylene Gas. With the solid brass regulator that allows you to work in any direction, the stainless steel burn tube constructed for durability and the lock button that keeps the torch lit for finger-free use, this hose torch has everything a professional and DIYer would need to get the job done.

• 5-Foot hose for maximum accessibility and mobility
• Instant on/off trigger igniter for simple one-handed operation
• High intensity swirl flame targets heat output and provides a hotter, more efficient flame
• Adjustable flame control knob for ease in switching between different applications
• Solid brass regulator is Pressure-regulated to burn in any direction

User questions & answers

Question:	Does this torch adapt to a 20 pound
Answer:	Yes it is plastic. The trigger as well as the gas adjustment valve is plastic. The photo is correct...both are blue plastic. Positive aspect: they work very well..smooth action Negative aspect: not sure how many falls or drops it could handle without failure. Hope that helps you
Question:	Does it come with the holder? And can you use Map gas tank with it
Answer:	Yes it has worked for me when upside-down.
Question:	How hot does this torch get
Answer:	Don't know, couldn't find "Made in China" anywhere. DID find "assembled in Mexico" which would point to USA origin. Commercial quality? Yes, I would say so. 5 stars in my book, a rare rating from a guy who uses tools all the time and knows a good tool when he sees and uses one.
Question:	does this get the same high heat as the TS8000. Thank you
Answer:	The regulator on this torch is made to fit the larger propane tanks. Ones you would find on larger barbeques or camp trailers, etc. It has a 7/8" left hand thread on the fitting that screws onto the tank. It will not fit on the smaller 1 lb. bottles.

Product features

Ignite Any Flame Easily

The Bernzomatic BZ8250HT Trigger-Start Hose Torch comes with a 5 foot hose, the torch provides the user with maximum reach to make any job easier. The versatile torch features an instant on/off trigger igniter for simple one-handed operation and a high intensity swirl flame that provides a hotter and a more efficient flame. The Bernzomatic BZ8250HT Trigger-Start Hose Torch can be used to complete a variety of household projects, including small diameter soldering, thawing, melting and various other heat applications.

Simple to Control

To be used with propane fuel, the Bernzomatic BZ8250HT Trigger-Start Hose Torch has an adjustable flame control knob for ease in switching between different applications.

Product description

Bernzomatic 14.1 oz. MAP-Pro cylinders provide maximum heat output for more efficient use and faster work times. Designed for heavy-duty use including soldering large copper pipes, brazing and heat-treating, the slim, lightweight cylinder is easy to grip and maneuver. Flame temperature in air is 3,730 degrees Fahrenheit. Use with hand torches designed for MAP-Pro fuel, including Bernzomatic torches Flame temperature in air of 3,730°F / 2054.4°C, ideal for medium to heavy soldering and brazing Faster heat transfer than propane fuel Slim, lightweight cylinder is easy to grip and maneuver Durable steel construction CGA600 connection Convenient 2 pack configuration California residents see Prop 65 WARNINGS

• Ideal for medium to heavy soldering
• Features an ergonomic grip for comfort
• This cylinder is recyclable

User questions & answers

Question:	How does this ship? ups fedex usps
Answer:	I think that is the exact model I have. I am not at home right now, but when i googled a picture of the ts8000, it looks identical to the one I have. The bluefires work great
Question:	Why are they so expensive? Can get them for less than $12 each in a store
Answer:	It says right in the description of this product that it is not for searzall, plus the searzall description says propane only
Question:	Does it have a screw on at the top to attach the torch
Answer:	NO DO NOT TIP THE BOTTLE For 22.79 I bought the Worthington Cylinder 309336 Universal Torch Extension Hose Adapter This will enable you to put the flame to any you prefer with no danger of ruining your torch head or having a flash back into the tank = explosion. Mapp Gas and Propane Gas tanks should never tipped. There are particles that settle to the bottom of the tank, and also a separation of gases. It is NOT 100 percent propane when put into tank there is a very small percentage of other things that get placed into the tank when it if filled at the manufacture. The only way to keep yourself safe and your equipment safe is to use it in a correct way. There is also a preventive sealant coating put on the all parts of the torch head. that you can see with your eyes. Taking the parts apart lets the material travel through the torch and it will ruin the orings inside the torch head and then be a danger of gas leaking while in use. Remember orings only last for up eight years so even if your torch head is showing no signs of failing once it gets to eight years old your should replace the torch head for a new one. The can explode like a bomb if gas gets out the head and the gas is then ignited by a flame or heat source. You life and your family/friends life is worth the money spent every eight years for a new torch head. I;d like to see Worthington or Bernzomatic have a discount program for those that turn in an eight year old torch head that they registered at time of purchase and then the consumer would receive a loyalty discount coupon for a percentage off the purchase of a new torch head. It will cost some money for new torch heads every eight years, over your lifetime to be safe, but it is worth it, You are actually playing with fire ( in this case a potential bomb) if you do not. I have already tooken notice of the year and month purchased and will buy a new one eight years when needed. SO to recap amazon.com 22.79 for Worthington Cylinder 309336 Universal Torch Extension Hose Adapter The other two reviewers are WRONG about tipping the head and You can not tip any Propane or MAPP tank and have it be safe. Just the same with an oxygen tank you should never tip them or lay them on their side. My source the company itself www.bernzomatic.com customer service 866-928-2657
Question:	can these be refilled
Answer:	TS4000 is on full blast when you pull the button; TS8000 has a valve that lets you adjust the flame size up or down as needed. I find the valve on the TS8000 is in an inconvenient location, accidentally adjusted by my hand while working.

Product description

The product is map-pro, trigger start torch, instant on/off trigger increases fuel savings & convenience, lock button keeps torch lit for finger-free use, replaceable brass tip, burn tip produces swirl flame for maximum heat output, pressure regulated to burn in all directions, cast aluminum construction provides added durability, for use with propane & map-pro fuel.. easy and simple use kit. The product is manufactured in United States.

The BernzoMatic trigger-started cast aluminum torch head light is a self-igniting high-temperature torch head designed for easy operation. Simply pull the trigger for ignition, and release it to turn off. This head produces a swirl flame and burns propane or mapp gas. Pressure regulation allows the flame to burn in any direction and ensures consistent performance. Even while the flame burns, the replaceable brass tip stays cool. The stainless steel burn tube, cast aluminum body, and brass burn tip are constructed for durability. The BernzoMatic torch head weighs 1.3 pounds and is backed with a 1-year limited warranty.

From the Manufacturer

IRWIN Industrial Tools Trigger Start Torch is designed to increase fuel savings and convenience. It keeps the torch lit for finger-free use and produces swirl flame for maximum heat output. This torch has pressure which is regulated to burn in all directions. It is made from cast aluminum which ensures extreme durability. This torch is of multi-application and can be used with propane fuel.

User questions & answers

Question:	can you tip the bottle alot when you are trying to point the flam straight down
Answer:	No it does not...they are beautiful lights and give great ambiance.
Question:	What is the difference between the ts4000 and ts
Answer:	The lights are solar powered but are activated when it gets dark. With a full charge (outdoors all day) they will shine for about 10 hours at night. In a sunny room, they should work, but probable not shine as long at night.
Question:	Has anyone used this torch for jewelry soldering of Gold and or Sterling Silver? Is it hot enough to reach melting point
Answer:	Black
Question:	can you use the ts4000 with coleman propane bottles
Answer:	2200 mA,Fully charged, it can use 8-10 hours

Product features

Bernzomatic TS4000 Trigger Start Torch

Work faster and more efficiently with the versatile High Heat Torch for Fast Work Times, designed for a wide range of jobs including soldering large diameter copper pipes, brazing and heat treating. The optimized swirl flame burns hot and efficiently for maximum heat output and fast soldering times. The auto start/stop ignition lights and extinguishes the flame with the push of a button, while a run-lock button keeps the torch lit for continuous use.

Product description

Manual Torch for General Applications

From the Manufacturer

The Bernzomatic UL2317 Brass Propane Torch Head is a basic pencil flame torch head. The torch produces a 1/2-Inch wide pencil flame for light work. The torch head is constructed from brass for durability.

• Manual start (light with a Bernzomatic Spark Lighter, sold separately)
• Basic pencil flame for small diameter soldering, thawing, melting and heat application
• Use only with propane fuel, such as the Bernzomatic 14.1 oz. Propane Hand Torch Cylinder
• Brass construction for durability
• Flame control valve easily sizes flame and extinguishes when finished

User questions & answers

Question:	Will this work with camp stoe propane tanks
Answer:	Yes. I use this item at work with a camp stove propane tank attached. I use a bunsen burner attached to a rubber hose , which is attached to the torch head.
Question:	What is od of the tip
Answer:	Tip OD is 0.500"-------
Question:	Could i braze small aluminum 9 gauge wire to .188 aluminum rod with the heat from this torch
Answer:	I don't think it will get hot enough.
Question:	Can this tip handle map gas as well
Answer:	The tip can HANDLE mapp gas, but you won't get any of the BENEFIT of using that kind of gas. Mapp gas can burn much hotter than propane, but you have to use a mapp torch head to get that benefit. Otherwise, you are wasting your money. Mapp heads are more expensive.

Product features

BernzOmatic Basic Use UL2317 Brass Pencil Flame Propane Torch Head

Ignite Any Flame Easily

The BernzOmatic Basic Use UL2317 Brass Pencil Flame Propane Torch Head comes with a start ignition that allows you to easily light any flame as it can be operated manually. The versatile webbed flame assists you to complete a variety of household projects, including small diameter soldering, thawing, melting and various other heat applications. Constructed with brass, you get a longer durability and quality.

Simple to Control

To be used with propane fuel, the BernzOmatic Basic Use UL2317 Brass Pencil Flame Propane Torch Head is designed to have an angled stainless steel burn turn with which you can control the flame valve easily and vary the flame. This also helps in extinguishing the flame easily.

Product description

Fits Pencil Point Burner Assembly

Excellent for Softening Hardened Putty



The Standard Propane Fuel Cylinder work best when used with the Burner Assembly .



*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!*****WARNING!

PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY AIR,UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC.



THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!

• Fits Pencil Point Burner Assembly
• Excellent for Softening Hardened Putty
• The Standard Propane Fuel Cylinder work best when used with the Burner Assembly .

User questions & answers

Question:	These cylindars are $3. a piece at homedepot where is the value here
Answer:	Not sure where they were made but my husband was not happy with the quality. Bought them in December and have already had to replace them.
Question:	Refillable? Are these Benzomatic standard propane fuel cylinders refillable
Answer:	No tiene
Question:	What is the difference between these, and say... the coleman camping propane cylinders
Answer:	It doesn't use sim card. So no sim slot.
Question:	what size is this 14 oz or 16 oz
Answer:	There are HI/LO switch for the ringtone, 2 levels.

Product description

Heat Shrink Torch for Large Surface Areas

• Auto start/stop ignition easily ignites and extinguishes flame
• Heat shrink tip provides wide flame for heat shrinking, heat treating and heat application
• For best results, use with MAP-Pro fuel, such as the Bernzomatic 14.1 oz. MAP-Pro Hand Torch Cylinder
• Cast aluminum body construction for durability
• Pressure regulated for consistent performance when tilted or momentarily inverted

User questions & answers

Question:	Will this work with the green coleman tanks or do you have to get the burnzomatic tanks
Answer:	45% Palm : Synthetic Leather, 40% Back Stretch Polyester, 10% Cuff Strecth Polyester, 5% Fourcettes : Stretch Twill Ironclad Customer Service
Question:	my torch stopped making spark. what to do to make it work
Answer:	i had to buy these a larger size than in mechanix. i am an xl in these and a L in mechanix
Question:	Hi, I am interested to buy this product, but we are a company and we need an invoice, is it possible to send to invoice by mail and with product
Answer:	These gloves are unlined, although they are relatively soft on the inside allowing for fair comfort with prolonged use.
Question:	How does the bz4500hs compare to the t8000 with regard to heat intensity
Answer:	They run a little tight "but" they stretch and relax. Jumbo size..for big hands! Hands stay warm and very comfortable.
Question:	Are the 14 oz propane cylinders prefilled
Answer:	According to the label in the glove, Jumbo is 2XL. They are slightly larger than an XL pair of these gloves I bought in a store which turned out to be a good thing. The XL version of this glove is a bit smaller than most XL size work gloves I have owned. The XL fit OK. It was a bit snug which made the XL better for picking up small items, but the wrist strap just barely reached my wrist bone and the fingers on the gloves were shorter than my fingers. This Jumbo, 2XL size fit more like most other XL gloves I have purchased. If you normally buy XL gloves and are looking for a loose fitting work glove. The Jumbo size is great. If you like your work gloves a bit snug so you can pick up small stuff, you might find the Jumbo size a bit too large but I think the Jumbo, 2XL is equivalent to an XL in most other leather work gloves.
Question:	Is the container filled with propane gas? Empty containers
Answer:	I would say yes they could be used to move logs in a fireplace, but not ones that are all charred and hot. I would suggest going with firefighter gloves maybe. These fell apart within a month of me doing logging for winter wood.
Question:	Is the container filled with propane gas? empty containers? and is it shipped to korea? if it is shipped, how much is shipping
Answer:	Not adjustable, but are well made of quality materials.
Question:	Will this work with a mr heater buddy
Answer:	I bought a large. They fit well and I normally do not wear a large size.