12 best 6100 ls

Product description

The Philips Sonicare Optimal plaque Control brush head features a concave trim profile specifically designed to target tooth-decaying plaque by hugging teeth and offering better conformity and surface-area coverage. Compatible with all click-on Sonicate models, these replacement brush heads remove up to 7x more plaque than a manual toothbrush. Use with a Philips Sonicate brush Sync(TM) compatible handle (Diamond Clean Smart or protective Clean) to unlock Smart features: brush Sync mode-pairing triggers your handle to select optimal mode and intensity level for exceptional plaque removal (certain models only); brush Sync replacement technology tracks how often and how hard you brush and will notify you when it is time to replace your brush head.

essential oil Warning: toothpaste containing essential oils can damage your brush head. Avoid direct contact with products that contain essential oils or coconut oil. Use may result in bristle tufts dislodging.



reminder bristles fade to let you know when it's time for replacement. Replace your brush head every 3 months as recommended by the American Dental Association. A fresh brush head every 3 months maximizes the effectiveness of Philips’ unique sonic are technology.



Philips sonic are optimal plaque toothbrush heads were formerly sonic are Pro results plaque Control. Brush head not well placed Reattach the brush head. Make sure that the brush head is well placed and not loose or wobbly. A small gap between the handle and the brush head is normal. Counterfeit brush heads Counterfeit brush heads may make more noise than genuine Philips Sonicare brush heads. We recommend you to use genuine Philips Sonicare brush heads. Brush head is worn If you used the same brush head for more than three months, you might need to replace your brush head. As brush heads wear out, they may start to produce more noise. We recommend replacing the brush head every three months.

• Superior clean: Clinically proven to remove up to 7x more plaque along the gumline and in between teeth than a manual toothbrush
• Special design: With a power tip to target plaque in hard to reach areas
• Gentle and effective: Soft, tightly packed bristles smoothly glide along the gum line, providing an amazing clean even without the perfect technique
• No guessing: Built in brush head replacement reminder lets you know when to replace your brush head, so you don’t have to remember
• Better together: Get the most from any Sonicare click on handle with genuine Sonicare brush heads that are designed to work together and provide optimal performance

User questions & answers

Question:	Does this fit sonicare Hx
Answer:	Hello! The handle for this Sonicare ProtectiveClean 6100 is plastic.
Question:	Will these fit the Sonicare model HX
Answer:	Hello! Yes, your Philips Sonicare toothbrush is water resistant. However, we do not recommend using it on the shower/bathtub. Follow cleaning instructions as per the manual.
Question:	Do these fit the essentialclean hx
Answer:	I was using ,but my hygienist told me to use Arm and Hammer toothpaste. it sounds counter intuitive, but Crest contains a chemical that can stain, even the whitening tooth paste..
Question:	Does this fit HX
Answer:	Hello! Yes, the Sonicare ProtectiveClean 6100 charges on a plug-in charging base.

Product features

Say goodbye to plaque

Densely-packed, high-quality bristles remove up to 7x more plaque than a manual toothbrush. And the specially curved power tip makes reaching the teeth at the back of your mouth a breeze.

Brush head replacement cues

Brush heads become less effective after 3 months of use, but we'll remind you before this happens. When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart or ProtectiveClean model), your toothbrush tracks how often and how hard you brush, and will notify you when it's time for a replacement. Don't have a Philips Sonicare BrushSync compatible toothbrush? No worries, just monitor your blue replacement reminder bristles, and when they turn white you'll know it's time.

BrushSync mode-pairing

When used with a Philips Sonicare BrushSync compatible handle (e.g. any DiamondClean Smart model or ProtectiveClean 6100), our convenient BrushSync mode pairing feature will allow you to effortlessly achieve the best possible clean. A microchip inside the Optimal Plaque Control brush head communicates with your handle. When the brush head is clicked on, the handle automatically selects the optimal mode and intensity level for exceptional plaque removal. All you need to do is start brushing.

The only true sonic technology

Our brush heads are designed to perfectly sync with Philips Sonicare technology. High-speed vibrations give up to 31,000 brush strokes per minute for outstanding results. This starts in the handle of every Philips Sonicare toothbrush. It powers every brush stroke to whip up your toothpaste into plaque fighting bubbles, driving them deep between your teeth and along the gum line for gentle yet effective cleaning.

Easily clicks on to all our handles

The Optimal Plaque Control brush head simply clicks on to your Philips Sonicare toothbrush handle and fits securely in place. Brush head replacement is made easy; just click off. Our click design makes it super simple to maintain and clean your brush head. The Optimal Plaque Control brush head fits all of our click-on toothbrush handles (does not fit Essence, PowerUp or Sonicare for Kids).

Better oral healthcare

All genuine Philips Sonicare brush heads are safe and gentle on teeth and gums. During tests, our brush heads are put through their paces to ensure you get exceptional performance and durability each time you brush. Not a single generic brush head tested* meets all quality and performance requirements for Sonicare genuine brush heads. Always use genuine Philips Sonicare brush heads for best results.

Product description

The Gildan Ultra Cotton long sleeve tee is as ideal for layering as it is flying solo. With a thick and heavy 6.0 oz. per sq. yd. fabric constructed from 100% cotton, it provides the softness and durability you demand. Rib cuffs and a twin needle bottom hem ensures it’s made to keep with up whatever you throw it’s way.

Gildan is one of the world's largest vertically integrated manufacturers of apparel and socks. Gildan uses cotton grown in the USA, which represents the best combination of quality and value for Gildan cotton and cotton blended products. Since 2009, Gildan has proudly displayed the cotton USA mark, licensed by cotton council international, on consumer's product packaging and shipping materials. Gildan environmental program accomplishes two core objectives: reduce our environmental impact and preserve the natural Resources being used in our manufacturing process. At all operating levels, Gildan is aware of the fact that we operate as a part of a greater unit: the environment in which we live and work.

• Sold by: "VISHTEA" guarantees your satisfaction on every purchase!

User questions & answers

Question:	Are these gildan: dryblend, ultra cotton, heavy blend
Answer:	For Southeastern Virginia it a good layering shirt when it cold and a good shirt when it cool. I wear an undershirt year round.
Question:	Is this shirt extra large tall
Answer:	My shirt was XXL not Xtra large. I'm 6'4" with 36" sleeve and the XXL fits nicely.
Question:	Im 5'7 180 what's the right fit xl or 2x
Answer:	I'm 5"⁷ and fluctuate between 180 and 195 and I wear 2xl comfortable now keep in mind I don't like my clothes to fit snug i like to be able to move freely
Question:	Does it shrink
Answer:	I buy white Gildan t shirts all the time I by extra large I don't like tight shirt's I'm buying the neon green long sleeves for work in the description it says both 50% 50% cotton polyester and 100% cotton so I'm confused if 100% they will shrink if 50 50 they will tighten up but then loosen back up after you wear then

Product description

Feel the difference of a gentle clean with our pressure sensor while removing up to 7x more plaque than a manual toothbrush. And the specially curved power Tip makes reaching the teeth at the back of your mouth a breeze. You can be sure of a safe brushing experience: Our sonic technology is suitable for use with braces, fillings, crowns, and veneers, and helps prevent cavities and improve Gum health. A microchip-enabled technology that detects and synchronizes the smart brush head With the smart handle. The smart handle and smart brush head pair is a powerful combination that enables smart replacement reminders.

• Gentle and effective care made easy with sonic technology that removes up to 7x more plaque vs a manual toothbrush
• Protect your teeth and gums with a pressure sensor that gently pulses to alert you when you're brushing too hard
• Always know when to replace your brush head for an effective clean with the brush head replacement reminder
• Two minute timer with QuadPacer helps ensure Dental Professional recommended brushing time and a consistent clean throughout your mouth
• Long lasting 14 days battery life; Battery indicator light lets you know when to recharge

User questions & answers

Question:	What is frustration free packaging
Answer:	this has a very mild taste - does not burn at all
Question:	What is the difference between this toothbrush and the sonice 2 series
Answer:	This product is very good and it helps control bleeding gums. But it takes time to see results; it doesn't happen overnight.
Question:	Does it develop mold in the area where the brush head connects to the handle? My very old one does
Answer:	From the research I’ve done, it looks like the product is sold in the UK by Listerine which explains the spelling difference.
Question:	Is this charger compatible with voltage range of 220V
Answer:	PR-013135, Ethyl Lauroyl Arginate HCI (LAE) 0.147% w/w, Other ingredients: Purified Water, Sorbitol, Alcohol, Glycerin, Poloxamer 407, Aroma, Benzoic Acid, Sucralose, Sodium Benzoate

Product description

Enjoy best-in-class styling with our most advanced trimmer, the Philips Norelco Multigroom 7000. An all-in-one trimmer for ultimate precision with DualCut blades that delivers maximum precision for head-to-toe styling. The steel frame and rubber grips deliver superior control and the Lithium-ion battery yields 5 hours of runtime.

• The all in 1 trimmer for your choice of beard, head, body, and/or face hair styling with 23 pieces for all your trimming needs
• The DualCut technology offers maximum precision and includes 2x more self sharpening blades that last up to 5 years
• To deliver maximum torque and power, the all in 1 trimmer includes a full metal motor and a drive train that's been reinforced with tempered steel
• Our unique cutting guards are reinforced with ultra strong fiberglass material to prevent bending and buckling, ensuring an even trim every time
• Lithium ion rechargeable battery delivers up to 5 hours of run time per charge

User questions & answers

Question:	Can I use it while plugged in and charging
Answer:	Greetings! Yes, the trimmer can conveniently be used cordless for 5 hours, or while plugged in for continual use.
Question:	can I use this in the shower
Answer:	I store it and use it physically in the shower and it works fine. But I don’t actually use it under running water (why would you?) and the place I store it in the shower doesn’t have water falling on it all the time. I like the convenience and neatness (no bristles in the wash) of using it in the shower and cleaning it right there.
Question:	Can it be used for the groin area
Answer:	Make sure hair is clean and dry as wet hair tends to stick to the body and, when trimming sensitive areas, always use a body guard.
Question:	What are the exact sizes of the attachments included
Answer:	There are 2 stubble guards (1mm, 2mm); 3 beard guards (3mm, 5mm, 7mm); 1 eyebrow guard (6mm); 4 hair guards (4mm, 9mm, 12mm, 16mm); 2 body guards (3mm, 5mm); and 2 fading guards (4-9mm).

Product features

DualCut Technology

Enjoy maximum precision with DualCut technology, which includes 2x more blades. The steel blades lightly brush against one another – sharpening themselves as they work. This results in blades that are sharp as day 1 after 3 years of use.

5 Hour Run Time

Our most powerful Lithium-ion rechargeable battery delivers up to 5 hours of runtime per charge. For additional convenience, the trimmer can also be used while plugged in.

Fully washable trimmer

The trimmer and all of its attachments are fully washable, so simply rinse them under the faucet for easy cleaning.

14 reinforced trimming guards

Our unique cutting guards are reinforced to prevent bending and buckling, ensuring an even trim every time.

Multiple lengths for quick and convenient head-to-toe triming. The reinforced guards are individually marked, and deliver clean, even cuts and trims on beard, stubble, head and body.

Premium stainless steel frame

The trimmer's frame is made of stainless steel for long-lasting durability, and the rubber detailing delivers best-in-class comfort and control.

Steel trimmer

The trimmer's precise steel blades create clean, straight lines and evenly trim through the thickest hair. The non-corrosive blades won't rust, and they self-sharpen to last longer.

Foil shaver

The foil shaver quickly and comfortably shaves clean lines around your style.

Steel precision trimmer

The narrow design of the steel precision trimmer makes it easy to precisely edge and finish small details.

Nose and ear trimmer

The trimmer quickly trims unwanted nose and ear hair without nicks or cuts.

Extra-wide hair trimmer

The steel trimmer's extra-wide design helps capture more hair in each stroke for faster trimming, haircutting and fading.

• Sold by: "VISHTEA" guarantees your satisfaction on every purchase!

User questions & answers

Question:	I'm a 5'3 130 lbs female and i want an oversized look but i dont want the torso length to be too long what size should i get it
Answer:	It's really good adhesive but I don't have it directly where the water is hitting it so I'm not 100% sure
Question:	Are these gildan: dryblend, ultra cotton, heavy blend
Answer:	None at all and it hangs in my shower.
Question:	Im 5'7 180 what's the right fit xl or 2x
Answer:	It depends on the surface. If it's glass, fiberglass, or glazed tile, you can pretty much use anything. Go online to the 3M website or just Google "How to best remove strong adhesives from glass or tile." I use nail polish remover. Be sure to ventilate the area & wear a mask. I've just about choked to death using it in a tiny bath with no fan or window. I'm a general contractor and this is my suggestion: Also contact 3M or research the web (Pinterest is a good source) for these surfaces, but always test the area (even vinegar can damage some surfaces) For any other tile that is even a little absorbent that could stain or react to the chemical and damage the surface, see below for who to contact. Same for the following: stainless steel, wood, faux wood, or plastic. After finding the chemical to use* still always test in a small, discreet area. Even if it seems like a hard surface, any of those can stain or be damaged. No tools (unless you have a strong and steady hand and know how to slide a razorblade between the hook and the wall to remove the majority of it). For painted (If you don't mind a patch & paint, you can use a razor or putty knife (safer) to slide between the wall and the sticker for the least amount of damage to have to repair. If you go to the 3M official website and talk to someone in chat or call, I always use chat whenever I can. There's not room for much error since both parties can see it all plainly, no matter how strong an accent is. If a discrepancy comes up later (their advice is incorrect, can't get what they offered, etc), then you have a transcript of the conversation! These can usually be sent to your email or downloaded, both of which go in a file I have just for them. It's saved me some big arguments, lots of time & even money, when I can show them what the rep said verbatim about something. Also helpful: If it contains directions, you have them to refer to whenever! Hope this helps.
Question:	Does it shrink
Answer:	N/a

Product description

Improve your gum health up to 100% better than a manual toothbrush with the protective Clean 5100 rechargeable electric toothbrush. It has a pressure sensor that protects teeth and gums from excess brushing pressure. Brush heads wear out over time. Our Brush Sync technology tracks how long you have been using your optimal gum Care brush head and how hard you have been brushing. Your electric toothbrush will beep to inform you when to replace your brush head. Customize your own brushing experience with your choice of 3 modes: Clean, White and Gum Care. The easy-start feature slowly increases the power of the brush as you get used to the Sonicare experience and the smarter encourages a full 2 minutes brushing time as recommended by your dental professional. The battery charge indicator light lets you know when it is time recharge; 2 week battery life. The kit includes 1 protective Clean 5100 handle, 1 Optimal gum Care brush head, 1 charger, 1 Travel case.

• Improve your gum health up to 100 percent with a safe and gentle experience vs. a manual toothbrush
• Protect your teeth with a pressure sensor that gently pulses to alert you when you're brushing too hard
• Always know when to replace your brush head for an effective clean with the brush head replacement reminder
• Personalize your brushing experience with 3 modes: Clean, White and Gum Care; Voltage: 110-220 V
• 2 minute Smartimer with QuadPacer helps ensure Dental Professional recommended brushing time and a consistent clean throughout your mouth

User questions & answers

Question:	will this fit the snap on toothbrush heads
Answer:	Hello! Frustration-free packaging is: Recyclable and does not include excess packaging materials, such as hard plastic clamshell casings, plastic bindings, and wire ties. Designed to be opened without a box cutter or knife, while protecting products just as well as traditional packaging.
Question:	Once fully charged how long before the battery needs recharging
Answer:	The 4100 has lithium battery, the series 2 uses NiMH. 4100 can be put on charger daily. Series 2 needs to have a drained battery before recharging. The 4100 also has a pressure sensor. I had the same question, and this is the response I got from Phillips.
Question:	Can I charge the handle in 220v
Answer:	I haven’t noticed anything like that at all. After every time I brush my teeth, I take my hand towel (a little damp), and remove the toothbrush head, wipe that off, and I also I wipe off the handle itself as well as the metal bar at the very top that the toothbrush clicks on to. It may seem tedious, but it literally takes me less than 60 seconds and I do think it’s good practice and helps prevent any sort of build up/accumulation.
Question:	Is there a specific brush head I need for this model
Answer:	Hello! Yes, you shouldn't have any issues charging this toothbrush on your travels as long as the voltage of the outlet you're plugging into doesn't exceed 220V. The voltage for this particular Sonicare is 100-220V.

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Cartridge or Filter Type Cartridge / Filter Combo
• Gas & Vapor Protection Type: Organic Vapor/Acid Gas/Ammonia/Methylamine/Formaldehyde
• NIOSH Cartridge or Filter Assigned Color Coding: Magenta/Olive

User questions & answers

Question:	Why are they pink
Answer:	No. The quick latch would be #6503QL. Thank you for considering 3M products.
Question:	Would this work with cigarette smoke. I cant get a family member to quit and I don't want to breathe their carcinogenic smoke
Answer:	Blocks cigarettes sent the same way it blocks the occasional passing of gas. ...not well.
Question:	Can the filter be cleaned and reused
Answer:	Need to buy seperate
Question:	Will protect me against the zombie apocalypse
Answer:	Yes

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

The Hanes cool dri t-shirt for men is a polyester performance tee that actually performs. Moisture-wicking technology keeps you cool and comfortable while a 50+ ultraviolet protection factor rating keeps you safe from harmful uv rays.

• 100% Polyester
• 4 oz., 100% polyester interlock jersey
• Moisture-wicking rapid-dry fabric
• 50+ UPF rating for excellent UV protection
• Perfect for print or sublimation
• Narrow ribbed collar

User questions & answers

Question:	Does the shirt smell bad after one wear? I'm planning on using it on a 2-week camping trip in a tropical climate with no opportunity to wash it
Answer:	Last year on a two week trip to French Polynesia, I wore the two long sleeved shirts nearly everyday for outside activities. The shirts were very comfortable and functional with their sun screen properties. Wuite satisfies with the wear and tear and if the were smelly, I didn't notice and my friends and family either didn't notice a smell or were to tactful to bring it up. Give it a shot you are on vacation.
Question:	Is this hot to wear in humid weather
Answer:	sorry, I live in arizona and its not humid! but, it's hot. I got these to wear in the pool for aerobics.
Question:	I am 5'1/2 weigh 125 will med.be ok for working out Length is
Answer:	I’m 5’11”, 175 lbs, trim build and the medium fit perfectly. Not loose, but not tight either. I wear a 15 1/2 - 34 shirt, usually a trim cut.
Question:	How do i know this has upf 50 protection? i don't see that claim on the packaging
Answer:	I don't see how it could be UPF 50, a 1/50th or 2% transmittance. SkinCancer.org's webpage "Sun-protective clothing" advises to check a fabric by holding it up to light, since if you can see through it, UV radiation will readily reach your skin. Having this product in black, and holding a single, unstretched layer of the fabric up to modest, household light, I can basically see right through it.

Product description

This particulate filter, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

User questions & answers

Question:	do these come in an air tight packaging
Answer:	These do come in sealed packaging, but they are not vacuumed-sealed and technically cannot be considered 100% air-tight, though close.
Question:	How long do the filters last when you are using them? I’m just trying to figure out what the cost is going to be overtime
Answer:	There's no set time as it's entirely dependent on multiple factors, such as how often you use them, the type of application you're using them for, the amount of exposure they are getting, and the amount of filtering they are doing. It's best to order multiple pairs and test the longevity of 1 pair to get an approximation of how long before you need to change them out.
Question:	Are these made in the USA
Answer:	No sure. But it only has a 3M USA or Canada customer service 1800 number on the packaging.
Question:	Is this suitable for tile dust, drywall, and mold
Answer:	I use it to mow and it has done well keeping the dust out of my nose. I would think it could handle drywall dust equally well but am not sure about mold. I would think the 3M website would give information on that. The only issue I've found with mine is the elastic has not held up too well. It still works, but I've gone to a different brand for mowing.

Product description

The SSD you trust: The newest edition to the world's best-selling SATA SSD series, the Samsung 860 EVO SSD is specially designed to enhance performance of mainstream PCs and laptops. With the latest V-NAND technology, this fast and reliable Solid State Drive comes in a wide range of compatible form factors and capacities. Its enhanced performance delivers consistent speeds, even under heavy workloads and multi-tasking, allowing for faster file transfers. The 860 EVO performs at sequential read speeds of up to 550MB/s with Intelligent TurboWrite technology, and sequential write speeds of up to 520MB/s. The TurboWrite buffer size is upgraded from 12GB to 78GB (performance may vary based on user's system hardware and configuration). The 860 EVO also offers boosted endurance of up to 8x higher TBW (Terabytes Written) than the 850 EVO. Feel secure storing and rendering large-sized 4K videos and 3D data used by the latest applications. The smart compatibility of the SSD lets you benefit from faster, more fluid communication with your host system. The refined ECC (Error Correction Code) algorithm and a new MJX controller generate higher speeds, and the improved queued trim enhances Linux compatibility. The 860 EVO provides reliability of 1.5 million hours (MTBF).

• Innovative V-Nand Technology: Powered by Samsung V-Nand Technology, the 860 Evo SSD offers optimized performance for everyday computing as well as rendering large-sized 4K videos and 3D data used by the latest applications
• Continuity tester/Wire tracer
• Secure encryption: Protect data by selecting security options, including Aes 256-bit hardware-based encryption compliant with Tcg Opal and Ieee 1667
• Warranty and compatibility: 5-year limited warranty; Windows 8/Windows 7/Windows Server 2003 (32 bit and 64 bit), Vista (SP1 and above), XP (SP2 and above), MAC OSX and Linux
• Included contents: 2.5 inches (7 millimeter) SATA 3 (6 GB/S) SSD & user manual (All other cables, screws, brackets not included); Reliability (MTBF): 1.5 Million Hours Reliability (MTBF)

Product features

The SSD You Trust

The Samsung 860 EVO is specially designed to enhance performance of mainstream PCs and laptops. With the latest V-NAND technology, this fast and reliable SSD comes in a wide range of compatible form factors and capacities.

Enhanced Performance

Speeds are consistent, even under heavy workloads and multi-tasking allowing for faster file transfer. The 860 EVO performs at sequential read speeds up to 550 MB/s* with Intelligent TurboWrite technology, and sequential write speeds up to 520 MB/s. The TurboWrite buffer size* is upgraded from 12 GB to 78 GB.

*Performance may vary based on SSD's firmware version and system hardware & configuration. For more information on the TurboWrite, please visit the manufacture website

Boosted Endurance

Up to 8x higher TBW* than the 850 EVO. Feel secure storing and rendering large sized 4K videos and 3D data used by the latest applications.

*TBW: Terabytes Written

Smart Compatibility

Benefit from faster, more fluid communication with your host system. The refined ECC* algorithm and a new MJX controller generate higher speeds, and the improved queued trim enhances Linux compatibility.

*Error Correction Code

Multiple Form Factors

Whatever size your computer needs, there is an 860 EVO for you. Choose among the 2.5-inch size for desktop PCs and laptops, and the SATA-based M.2 (2280) or the mSATA for ultra-slim computing devices.

Management Software

Samsung Magician software is designed to help you manage your SSD with a simple and intuitive user interface.

• Firmware updates: Get notifications when new firmware is released, and easily install updates for enhanced performance, stability, and compatibility.
• Performance benchmark: Check your SSD's sequential and random read/write speeds, so you can maintain superb performance.
• Data security: The 860 EVO supports AES 256-bit hardware-based encryption and is compliant with TCG Opal and IEEE 1667.

Product description

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. In Canada, call. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
• Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
• Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
• Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
• Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
• Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What filter do i need for this to sand joint compound
Answer:	It should last 3-4 hours on high.
Question:	Can this respirator be disassembled for cleaning? Like if dusk got in when removing it and can parts be replaced if needed..Please and Thank you
Answer:	To turn it on, you must cycle through the different modes. After it stays on a mode for more that 3 seconds, the next button press will turn it off. This allows you to turn it off without cycling through the modes.
Question:	Which filters should i get that would work for this item? are their types of filters for certain duties such as chemical's
Answer:	Please verify that when you charge the battery, the red light above the USBC connector remains on. Then make sure the battery is fully plugged into the LED strip when you push the power button on the LED strip. If it still doesn't work, we will send you a replacement.
Question:	whats icluded in the package? Does it come with a set of filters
Answer:	I think so.. the battery should get full charge before use first time

Product features

Step 1

Place the respirator over your nose and mouth with bottom straps unfastened.

Step 2

Pull the top strap over your head, placing the head cradle on the crown of your head.

Step 3

Hook the bottom straps together behind your neck.

Step 4

Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.

Using Particulate Filters

Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Hard Case Particulate Filters

Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.