12 best mechanix grip gloves

Product description

Work smarter not harder with our specialty grip gloves. We constructed the palm with anti-slip Armortex to increase friction and enhance your grip. Textured Armortex displaces liquids to reduce slippage and maintain grip with less strenuous effort. The specialty grip work glove features our wide-fit closure so you can adjust your level of comfort.

• Form-fitting TrekDry material keeps working hands cool and comfortable
• Adjustable wide-fit closure provides a secure fit
• Textured Armortex provides enhanced gripping power in dry, oily and wet conditions
• Pinched fingertip construction improves fingertip strength and durability
• Machine washable
• Neoprene latex construction
• 100% cotton interior lining

User questions & answers

Question:	are the gloves porus
Answer:	6" x 8" x 1" for the shallow pan. 6" x 8" x 2" for the deep one. They work great, but would not recommend for long broils.
Question:	How good would they be for occasional shooting
Answer:	"Aluminized steel with a non-stick interior" is the description. Nordicware's website further states:"Our bakeware coatings are and have always been PTFE and PFOA-free, since an entirely different formulation is necessary to release sugars (associated with baking) than proteins (associated with meats and dairy).Our cookware coatings can be one of several formulations, depending on what substrate material they're being applied to (cast aluminum versus aluminized steel). We are able to state that PFOA is not present in any of the coating formulations that we currently use on consumer cookware products. PTFE (an entirely different compound than PFOA) is the material that gives nonstick surfaces their "slipperiness" and is widely used in consumer cookware coatings, including many of Nordic Ware's stovetop cookware products.Teflon ® is a registered trademark of DuPont and refers to a specific nonstick coating that they exclusively manufacture. Teflon® is not used by Nordic Ware for any consumer cookware or bakeware finishes at this time.If you have additional questions about the nonstick coatings that Nordic Ware uses, please contact our Consumer Service Department"
Question:	Are the finger tips reinforced? The fingertips are the first thing to tear
Answer:	The secret to that is to never mistake the package dimensions for the product size. You are correct though, they do need to do more to scale things for size like familiar objects in the product photo to gauge them.
Question:	What level of cut resistant are they
Answer:	I don't know. I use them in our coach and it doesn't have a dishwasher.
Question:	could i put it in my garage window 22.5 x 14. woud it be a good idea
Answer:	Do not know about new Magm But the Camco ceramc set is wonderful I had an old teflon Magma and the handles were difficult The Camco is great qulaity
Question:	does it turns on and off automatically with huidity level
Answer:	It has a one year warranty from the date of purchase against defects in the manufacturing process. Also, we have an agreement with Amazon and they will honor our warranty (it supersedes their 30 day return policy). Please give us a call at 800-334-2004 if we can be of further assistance.
Question:	What does it actually do
Answer:	Yes, they are oven safe without the handles. We have used them in our oven many times and have had no issues so far. The following link may be useful to you.http://www.camco.net/product/camco-10-piece-ceramic-cookware-nesting-11280/
Question:	Can I use this
Answer:	No it won't...

Product features

Tjernlund UnderAire Crawlspace Ventilator Fan Moisture Mold Reducing

Fan powered crawl space ventilation quickly reduces moisture helping to protect both home and occupants.

Ventilates excess moisture, the cause of mold, mildew and wood rot. Increases air circulation to fight condensation.

Constant operation helps vent radon, treated wood off-gassing and odors that might otherwise migrate into living areas.

Model V1D

One fan and large face-plate sized for ventilation openings through block foundations. Includes thermostat, dehumidistat and pre-wired 6" power cord.

Model V2D

Two fans and large face-plate sized for ventilation openings through block foundations. Includes thermostat, dehumidistat and pre-wired 6" power cord.

Model V4D

Power ventilate musty, damp crawl spaces through existing passive vents. Controlled by a dehumidistat which actuates the fan if the relative humidity rises above the selected set point.

Excessive Humidity Levels

Humidity can promote fungus growth and increased termite activity. Humidity may also cause plumbing failures due to rust and corrosion.

Constant operation helps vent radon gases, treated wood off-gassing and other odors that might migrate into living areas. Deluxe models (V1D, V2D & V4D) are controlled by a dehumidistat which actuates the fan if the relative humidity rises above the selected set-point.

MECHANIX WEAR SPECIALTY GRIP GLOVES

Work smarter not harder with our Specialty Grip gloves. We constructed the palm with anti-slip Armortex to increase friction and enhance your grip. Textured Armortex displaces liquids to reduce slippage and maintain grip with less strenuous effort. The Specialty Grip work glove features our Wide-Fit closure so you can adjust your level of comfort.

GRIP

Textured Armortex grip technology maintains enhanced gripping power in dry, oily and wet conditions.

COMFORT

Form-fitting TrekDry material keeps your hands cool and comfortable while you work.

FIT

Adjustable Wide-Fit closure creates seamless fit to your wrist.

Also Available: Shop Apron

With input from championship-winning NASCAR, NHRA and AMA Supercross teams, every detail of our Shop Apron has been refined and perfected to allow quicker access to tools and parts. The upper apron area has been expanded to cover more of the chest and the very useful upper center pocket has been optimized to perfectly fit a standard spiral bound note pad, 6 inch metal engineer ruler, and #2 pencil for good measure. Fits waist sizes 28 to 44.

• SKU: MWA-05
• ASIN: B0001VNZR8

Also Available: Heat Sleeves

When things heat up under the hood, slip on our Kevlar Heat Sleeves to protect your arms from cuts and burns. Our Heat Sleeves are treated with Fibreshield to resist fluids, and built with 100% Kevlar for critical heat resistance. Each 18” sleeve features thumbholes for a secure fit and is machine washable. One size fits all.

• SKU: MHS-05-500
• ASIN: B000R7LZH8

Also Available: 700 Series Knee Pads

Our 700 Series Knee Pads feature pre-curved foam that cradles your knees and actively absorbs impact when you come in contact with the ground. The knee pads are constructed with rugged Armortex and Kevlar threading to resist punctures and abrasions from concrete to gravel. Computerized patterning and assembly ensures each knee pad is optimized to fit properly. Dual stretch Neoprene leg straps and non-slip laminate secure each pad to your leg without restriction.

• SKU: MKP-05-700
• ASIN: B0001VNZVE

Product description

Work smarter not harder with the Original Grip glove. We fully covered the palm with durable Armortex Grip so you can work with extreme gripping power and less strenuous effort. Breathable TrekDry material form-fits the back of your hands to help keep them cool and comfortable, while the Thermal Plastic Rubber (TPR) closure secures the glove comfortably to your wrist. Durable Armortex Grip rolls over your thumb and index finger, providing more control in dry, oily and wet conditions.

From the Manufacturer

When you need all the grip you can get, put your hands into the Original Grip Glove. The specially designed dual-layered PVC coated palm uses a dimpled grip pattern to give you the vice-like grip you need. In addition to offering superior grip, the same pit tested features found in our Original Glove offer all around comfort and protection. Whether you're getting a grip on an oil filter or using a greasy wrench on your lawn mower, the Original Grip Glove will make your job easier by allowing you to work faster, safer and cleaner.

• Form-fitting TrekDry material helps keep hands cool and comfortable.
• Thermal Plastic Rubber (TPR) hook and loop closure provides a secure fit.
• Armortex Grip displaces liquids and provides durable gripping power.
• Machine washable.

User questions & answers

Question:	Would this be good for change flat tires? If not, please suggest good alternative
Answer:	Hello George,Thank you for your inquiry. Yes that product is oven safe up to 350 Degrees. Thank you for allowing me to be of service to you. Kind regards, Audrey Consumer Relations
Question:	Would these gloves be good to do oil changes with
Answer:	Dear Consumer,Thank you for your inquiry. This cookware set is designed in the USA, manufactured in either Thailand or China. Thank you for allowing us to be of service to you. Sincerely, Danelle Consumer Relations Representative
Question:	Would these gloves be good to do oil changes with
Answer:	Typically I always thought that it was not a good idea to put Teflon coated pots and pans in the dishwasher, so I've never done that. But they rinse so easily for cleaning that it would be unnecessary to do so.
Question:	Is this the new version? The picture is for the old version,which has a very different palm from the one currently featured on the Mechanix Wear site
Answer:	The one that came with mine is 11-1/2" x 8 with a rack. I also bought a couple of other pans 1 is 9 x 6" with actually three pans in one. Another is 12 x 8-1/2 ".

Product features

Armortex Grip

Work smarter not harder with the Original Grip glove. We fully covered the palm with durable Armortex Grip so you can work with extreme gripping power and less strenuous effort. Durable Armortex Grip covers the palm and fingers to give you more control in dry, oily and wet conditions.

Wrist Closure

Thermoplastic Rubber (TPR) wrist closure provides light impact protection and a secure fit while you work.

TrekDry Breathability

Breathable TrekDry conforms to the back of your hands to help keep you cool and comfortable while you work.

Armortex Grip

Durable Armortex Grip protects your palm and provides gripping power in dry, wet and oily conditions.

Product description

Patented silicone fused palm and index finger, Terry Cloth sweat Wipe, neoprene knuckle impact protection, TPR cuff Puller, TPR hook and loop closure.

• 100% Nylon
• Imported
• Silicon Fused palm and index finger
• Terry cloth sweat Wipe and TPR cuff puller
• Neoprene knuckle impact protection
• TPR hook and loop closure
• 1 pair of gloves

User questions & answers

Question:	Can this be uses under water for one to two hours at a time
Answer:	Yes it will fit a pin Arm.
Question:	Is the sizing comparable to mechanix gloves
Answer:	No. La caja solo trae un limpiaparabrisas, de hecho por la medida de este limpiaparabrisas se que ese coloca en el lado del copiloto.
Question:	Will these work with touch screen electronics
Answer:	I only bought the front blades. The right side is 22 inches. The left side is about 25 inches. My rear blade, which I did not buy is about 11 inches. Don't have anything that measures 13 or 13 3/4. Hope this helps.
Question:	Do they have a good grip
Answer:	Nope! It has a chrome piece inlaid for a nice look. The handles are quite safe. You can even put the piece's in the oven to keep warm at 170° ,but of course one would use a pot holder to remove from the oven. Hope this helped you.

Product features

Tactical Grip Glove

The tactical grip glove was built to survive harsh tactical climates. The tactical grip’s claim to fame is the patented silicone-fused palm which provides maximum grip. This added grip is fused into the palm through a heat process to prevent the silicone from peeling off. The terry cloth on the back of thumb can be utilized to wipe the sweat away while staying focused on the task at hand. When the job is complete and the day is at an end these tactical grip gloves can be tossed in the washer as they will not dry out or shrink when washed.

Patented Diamondclad Silicone Fused Palm

The patented diamondclad silicone fused palm provides for ultimate grip.

Neoprene Knuckle Protection

Neoprene knuckle protection that protects the knuckles from impact and abrasion while allowing flexibility.

Thermoplastic Cuff Puller

The thermoplastic cuff puller allows the operator to get the glove in the proper position faster.

Caring for your Ironclad Tactical Gloves

For extended durability and comfort, machine wash and hang dry your Ironclad gloves on a regular basis. Machine wash cool. Do not use bleach, machine dry or use an iron on Ironclad gloves. Air drying is recommended in order to keep the size consistent with its original form from time of purchase.

Product description

When you need the control of bare hands while still wearing gloves, reach for the Specialty 0.5mm. Our most dexterous work glove features a high-dexterity 0.5mm AX-Suede palm that forms to your hand for precision work. The Specialty 0.5mm is anatomically designed to the natural curvatures of the hand using three-dimensional patterning to improve overall dexterity. Breathable TrekDry protects the back of the hand and allows cool air in when the heat is on.

• Thermoplastic Rubber (TPR) closure provides a secure fit to the wrist
• Form-fitting TrekDry material keeps hands cool and comfortable
• High-dexterity 0.5mm AX-Suede palm material provides precision feel
• Hourglass finger design eliminates material overlap
• Machine washable

Product features

Specialty 0.5mm High-Dexterity AX-Suede

Our most dexterous work glove features textured hi-dex 0.5mm AX-Suede material that forms to your hand for precision work. The Specialty 0.5mm High-Dexterity glove is anatomically designed to the natural curvatures of the hand using three-dimensional patterning to improve overall dexterity while you work.

Top Closure

Thermoplastic Rubber (TPR) protects your wrist and provides a secure fit while you work.

TrekDry Breathability

Form-fitting TrekDry conforms to the back of your hands to help keep you cool and comfortable.

High Dexterity

High-Dexterity 0.5mm AX-Suede delivers precision fit and feel when working with small parts and fasteners.

Product description

The Original glove revolutionized the hand protection industry with its versatile design and has faithfully served its users ever since. Durable microfiber extends the life of the glove and breathable TrekDry forms to the back of the hand, creating an exceptional fit with superior dexterity. Keep your gloves secure to your gear or pack with the nylon web loop conveniently positioned beneath each wrist. The Original provides unmatched fit, feel and functionality so you can focus on what lies down range. Machine washable.

• Form-fitting Trek Dry helps keep hands cool and comfortable.
• Flexible Thermal Plastic Rubber (TPR) closure provides a secure fit to the wrist.
• Industrial grade hook and loop.

User questions & answers

Question:	I'm looking for a good pair of gloves to wear while winter hunting in Montana. Are these warm enough and can they be used to cycle and fire a rifle
Answer:	Yes, the blades come with the adapter pieces needed to fit different manufacturers.
Question:	Would the 2X-small fit a 13 year old
Answer:	Yes, we fit, sizes are 26" Driver & 24" for the Passenger.
Question:	HOW DO I FIND OUT MY HAND SIZE
Answer:	Yes, you are correct, the application guide states top lock for both arms, but the passenger side is missing in the package. I will be glad to send it to you. Please call the number on the back of the package to give our team your address, model & type of blade. We can send it within 2-3 days at no charge. Sorry for the inconvenience, this is a limited time concern only.
Question:	Are these bulletproof? Will they block 7.62×39mm and 5.56×45mm nato rounds
Answer:	Yes, it will fit, sizes are, 26" Driver side 14" Passenger side. And Rear is 13"

Product features

Mechanix Wear - Original Covert Tactical Gloves (X-Large, Black)

The Original tactical glove revolutionized the hand protection industry with its versatility and anatomical design. Rugged 0.8mm synthetic leather infused with touchscreen technology creates the perfect blend of dexterity and durability. Breathable TrekDry conforms to the back of your hands to help keep you cool and comfortable in the field. The Original delivers unmatched fit, feel and functionality so you can focus on what lies down range.

Features:

1. Form-fitting TrekDry helps keep your hands cool and comfortable.
2. Adjustable Thermoplastic Rubber (TPR) wrist closures create a secure fit.
3. Reinforced thumb and index finger improve durability.
4. Touchscreen capable synthetic leather provides the perfect blend of dexterity and durability.
5. Nylon carrier loops for storage.
6. Machine washable.

Intended Uses:

• Military
• Law Enforcement
• Shooting Sports
• Maintenance Repair Operations

Product description

Professionals and enthusiasts agree – the FastFit is a toolbox must-have. Form-fitting stretch panels between your fingers provide a snug fit and the elastic cuff offers easy on/off flexibility between tasks. The anatomically designed two-piece palm eliminates material bunching for an exceptional fit when working with hand tools. Breathable TrekDry material form-fits the back of your hand and helps keep them cool and comfortable as you work through the day.

• Form-fitting Trek Dry material helps keep hands cool and comfortable.
• Flexible Thermal Plastic Rubber (TPR) Elastic cuff provides a secure fit with easy on/off flexibility. Closure provides a secure fit to the wrist.
• Anatomically designed two-piece palm eliminates material bunching. Industrial grade hook and loop.

User questions & answers

Question:	Hi do these have touch screen capabilities
Answer:	Yes. The breathability is important. If you want them grippier there is an armortex grip version of these gloves.
Question:	Why are the medium gloves 5 dollars more than large and XL
Answer:	These Original gloves do not have hard knuckles. Please see our M-Pact line for increased knuckle protection.
Question:	Are these warm
Answer:	I ordered a pair of XLs and feel the size was about right (what I expect XLs to be).
Question:	Is these gloves washable
Answer:	No max. It is universal

Product features

Protective Closure

Flexible Thermoplastic Rubber protects your wrists and creates a comfortable fit as you work throughout the day.

TrekDry

Breathable TrekDry conforms to the back of your hands to help keep you cool and comfortable while you work.

Seamless Palm

0.8mm synthetic leather provides optimal dexterity and durability so you can work with confidence.

Easy On. Easy Off

The stretch elastic wrist closure provides a secure fit to your wrist that allows for easy glove removal between tasks.

High Dexterity

0.6mm touchscreen capable synthetic leather provides optimal dexterity and durability so you can work with confidence.

Index and Thumb Reinforcement

A second layer of materials reinforces your index finger and thumb to extend wear to your most active digits.

Impact Protection

Thermoplastic Rubber impact protection is anatomically shaped to protect the back of your hand from the top of your wrist to the tips of your fingers.

Palm Padding

D3O palm padding absorbs and dissipates high-impact energy and vibration.

Also Available: Shop Apron

With input from championship-winning NASCAR, NHRA and AMA Supercross teams, every detail of our Shop Apron has been refined and perfected to allow quicker access to tools and parts. The upper apron area has been expanded to cover more of the chest and the very useful upper center pocket has been optimized to perfectly fit a standard spiral bound note pad, 6 inch metal engineer ruler, and #2 pencil for good measure. Fits waist sizes 28 to 44.

• SKU: MWA-05
• ASIN: B0001VNZR8

Also Available: Heat Sleeves

When things heat up under the hood, slip on our Kevlar Heat Sleeves to protect your arms from cuts and burns. Our Heat Sleeves are treated with Fibreshield to resist fluids, and built with 100% Kevlar for critical heat resistance. Each 18” sleeve features thumbholes for a secure fit and is machine washable. One size fits all.

• SKU: MHS-05-500
• ASIN: B000R7LZH8

Also Available: 700 Series Knee Pads

Our 700 Series Knee Pads feature pre-curved foam that cradles your knees and actively absorbs impact when you come in contact with the ground. The knee pads are constructed with rugged Armortex and Kevlar threading to resist punctures and abrasions from concrete to gravel. Computerized patterning and assembly ensures each knee pad is optimized to fit properly. Dual stretch Neoprene leg straps and non-slip laminate secure each pad to your leg without restriction.

• SKU: MKP-05-700
• ASIN: B0001VNZVE

Product description

The FastFit provides service members with an unbelievable fit and easy on/off flexibility in the field. The anatomically cut two-piece palm eliminates material bunching for maximum control and improved manual operation. Form-fitting TrekDry material is lightweight and breathable so your hands stay cool and comfortable in any environment. High-dexterity 0. 6mm synthetic leather infused with touchscreen technology keeps you connected. Keep your gloves secure to your gear or pack with the nylon cord loop conveniently positioned beneath each wrist. IMPORTED

• Breathable TrekDry keeps hands cool and comfortable
• Stretch-elastic cuffs create a secure fit
• Pinched fingertip construction improves fingertip strength and durability
• Anatomically designed two-piece palm eliminates material bunching
• High-dexterity 0. 6mm synthetic leather infused with touchscreen technology

User questions & answers

Question:	What size are the large in inches
Answer:	There really is no right answer for this. I've seen a 13 yr old that was 6'2" & 240lbs who used size XL gloves. I'm 18 yrs old 5'8" & 140lbs and I usesize small.
Question:	Would these be too hot (clammy) for strenuous hiking (challenging ascents) in direct sunlight
Answer:	I tried the hand size chart, and it tells me "Large", except I have trouble fitting into a 2X (XXL) glove. Take it with a grain of salt, and go find a store, try on various maker's sizes to actually find your size.
Question:	Is the size chart accurate
Answer:	Mine stopped a 20mm round fired at me from an A10. The dexterity was exceptional. So good in fact, it helped me to pick up my entrenching tool which I hurled at the plane literally knocking it out of the sky. Oh, they also protect your hand from heavy objects. An Abrams tank ran over mine and except for a little pressure I didn’t feel a thing. They can also withstand a bite from a 18’ Great White. Seriously, some of these questions are ridiculous. Stop eating Tide Pods you bunch of morons....
Question:	Is it Ar 670-1 compliant
Answer:	No

Product features

MultiCam Camouflage | Blend In

MultiCam camouflage was developed to effectively disguise the wearer across varied atmosphere, seasons, elevations and light conditions. The pattern takes advantage of the human eye and how the brain perceives shape, volume and color. With only a small portion of the eyes responsible for perceiving color, the brain 'fills-in' what the observer sees as part of the background. The integration of MultiCam into Mechanix tactical gloves help maintain the patterns' effectiveness in the operating atmosphere.

Comfortable Wrist Closure

TPR closure provides light protection and a seamless fit to your wrist.

TrekDry

Breathable TrekDry conforms to the back of your hands to help keep you cool and comfortable in the field.

Dexterity

Seamless 0.8mm synthetic leather palm provides the perfect blend of dexterity and durability.

Palm Padding

D3O palm padding absorbs and dissipates high-impact energy and vibration.

Product description

The M-Pact Fingerless Covert tactical glove is designed to protect law enforcement from impact and abrasion injuries in the field without compromising tactile control. Anatomically designed Thermoplastic Rubber (TPR) protects the back of the hand from impact, small cuts and abrasions without hindrance. The palm is reinforced with durable Armortex and padded with D3O to absorb and dissipate energy through the palm of your hand. When you need the control of bare hands without sacrificing protection, reach for the M-Pact Fingerless.

• Patented Impact Guard protects first knuckle with EVA foam padding.
• Fingerless design provides maximum dexterity.
• D3O palm padding absorbs and dissipates high-impact energy through the palm.
• Armortex palm reinforcement provides durable gripping power.
• Machine washable.

User questions & answers

Question:	Does this product work
Answer:	It seems like rubber to me. It is however noisy on my windshield but I am not sure if it is the blade or the glass...
Question:	How do these compare, size wise to the previous version of these gloves? The old version, in the medium/large size was a good fit for me
Answer:	This fits my 2014 Q50, but there's all kinds of extra peices for mounting all different types of wiper arms. As long as you get the right length, it will probably apply to most cars.
Question:	I’m looking to wear them in Las Vegas summer doing outdoor work, will they fell like my hand are in an oven
Answer:	Yes, we fit, sizes are-21" Driver side 19" Passenger side and your model has Hook Arms disregard extra hardware in package, use the one already installed.
Question:	Do they tear up too soon ? Life expectation on regular use
Answer:	The wiper blades have outlasted any other pair of wiper blades I have bought and used. They do their job as advertised or better. The cost from Amazon was lower than any of the ones on the shelves at local auto parts store. I would/will repeat the purchase if these wiper blades remain available.

Product features

Mechanix Wear - M-Pact Fingerless Covert Tactical Gloves (Medium, Black)

Make an M-Pact in the field. When you need the control of bare hands without sacrificing protection, reach for the M-Pact fingerless. The next generation of M-Pact tactical gloves protect military and law enforcement professionals with impact protection. D3O palm padding dissipates high-impact energy to reduce hand fatigue when you’re fully engaged.Thermoplastic Rubber (TPR) closure provides a secure fit to your wrist.

1. Breathable TrekDry keeps hands cool and comfortable.
2. Armortex palm reinforcement.
3. Fingerless design delivers maximum dexterity.
4. D3O palm padding absorbs and dissipates high-impact energy.
5. Durable synthetic leather palm.
6. Nylon carrier loops.
7. Machine washable.

Intended Uses:

• Law Enforcement
• Shooting Sports
• Maintenance & Repair Operations

Product description

When you take the Original Mechanic Wear glove and add a bit of extra grip, you get the Original High Abrasion glove. Features an exclusive tire-tread fingertip grip pattern plus rubberized nonslip Clarion Zeus thumb, index and middle fingertips, delivering increased durability and added grip in an all-around glove. You never know when you might need a little extra grip. Gray. Size Large..

• Glove is designed specifically for those jobs needing extra grip with out additional padding
• Lycra panels between fingers for added comfort and mobility
• Dual layered finger tips for increased protection and reduced wear
• Ultra thin TPR strap with hook and loop closure provides comfort and adjustability

User questions & answers

Question:	Does water soak into the inside
Answer:	Your crawlspace needs to be kept at no higher than 55% humidity. This fan has a humidistat (a switch that activates based on a certain level of humidity).If you set the (variable) switch to 55%, the unit will automatically turn on and stay on, ventilating the crawlspace until the humidity level drops below your setting (in this case, 55%).I hope that helps :)
Question:	Do they get wet from the inside
Answer:	The Crawl space fan fits onto the interior of crawl space wall over the vent opening. For electricity, plug into a nearby receptacle then adjust the humidity level and let it run. In my case there was standing water due to moisture dripping from AC air handler and ducts. Within a few days the water was gone and the fan began cycling off/on as humidity level demanded.
Question:	how good is the grip of these gloves? (like do you have to worry about stuff slipping form your hands
Answer:	yes that blade fits on the passenger side

Product description

Large, general utility, a comfortable form fitting glove designed for a variety of tasks, machine washable/air dry, protected knuckle area reinforced palm & fingertips.

From the Manufacturer

Ironclad's General Utility GUG-04-L is the original high performance utility glove. A comfortable, form fitting glove designed to handle all of your day to day tasks. Not to mention, they are completely washable, just like every other Ironclad glove. For best results machine wash and hang dry. Ideal for the shop, home, delivery, clean up, construction, equipment operation, rigging and the yard.

• HIGH PERFORMANCE TASK SPECIFIC WORK GLOVE - The number one selling Ironclad work glove
• HAND SAFETY - Thermoplastic rubber knuckle protection provides impact and abrasion protection across the knuckles
• SECURE FIT - Adjustable Hook and Loop Closure provides a secure custom fit for ideal performance
• SWEAT MANAGEMENT FEATURE - Terry cloth sweat wipe conveniently located on the back of the thumb allows you to stay focused on the job at hand with one wipe of the brow
• MACHINE WASHABLE - Machine wash cool. Air drying is recommended in order to keep the size consistent with its original form from time of purchase
• ENGINEERED FIT - All Ironclad gloves are designed with our industry leading flawless fit system that defines up to 16 application driven measurements to provide best in class fit

User questions & answers

Question:	How to wash and dry them
Answer:	Hi and thank you for your question. Care information for all of our gloves can be found on our website at http://ironclad.com/glove-care/ Specific care information for the General Utilities is below. Please note that the washing and care instructions are indicated on the original product packaging. For extended durability and comfort, machine wash and hang dry your Ironclad gloves on a regular basis. Machine wash cool. DO NOT use bleach, machine dry or use an iron on Ironclad gloves. Air-drying is recommended in order to keep the size consistent with its original form from time of purchase. Thanks again. Macky L. Ironclad Customer Service
Question:	Where are this gloves made from
Answer:	Indonesia
Question:	Will these protect against rose thorns, etc
Answer:	The palms will provide good protection from rose thorns. The nylon on the back of the hand only provides minimal protection.
Question:	is there a size chart, or can anyone tell me what size for 8inches from base hand/wrist to tip of middle/longest finger
Answer:	Based on your past sizes, golf glove, or try a size on in the local hardware, or auto parts store has similar gloves. But I like the way ironclad makes their gloves. I'm sure they have a size chart, and customer service on their website .

Product features

General Utility - Reinforced Dexterity

The original high performance utility glove. A comfortable, form-fitting glove designed to handle all of your day-to-day tasks. Best uses include but are not limited to shop, home, delivery, clean-up, construction, equipment operation, rigging, yard work. The craftsmanship in this glove is unmatched by the competition. The terry cloth on the back of thumb can be utilized to wipe the sweat away while staying focused on the task at hand. When the job is complete and the day is at an end these high performance utility gloves can be tossed in the washer as they will not dry out or shrink when washed.

Synthetic Leather Reinforcements

The palm design provides excellent dexterity and is reinforced in critical areas for maximum durability.

Thermoplastic Knuckle Protection

The Ironclad logo across the knuckles is made of thermoplastic rubber that protects the knuckles from impact and abrasion.

Thermoplastic Cuff Puller

The thermoplastic cuff puller allows the operator to get the glove in the proper position faster.

Caring for your Ironclad Gloves

For extended durability and comfort, machine wash and hang dry your Ironclad gloves on a regular basis. Machine wash cool. Do not use bleach, machine dry or use an iron on Ironclad gloves. Air drying is recommended in order to keep the size consistent with its original form from time of purchase.

Product description

Measure twice, cut once. The M-Pact Leather Framer work glove is designed to provide professional carpenters with a functional fingerless design that delivers more dexterity when measuring, cutting and framing structures. The Framer’s fingerless design frees your thumb, index and middle fingers so you can handle your arsenal of tools with precision and control. D3O palm padding reacts on impact to absorb and dissipate energy when you’re in full swing on the job. The glove is constructed with DuraHide leather and flexible Thermoplastic Rubber (TPR) to protect the back of your hands from impact injuries or the occasional hammer strike.

• Rubber, Leather
• Fingerless design frees your thumb, index and middle finger to provide optimal control.
• Thermoplastic Rubber (TPR) knuckle guard and full-length fingertip protection reduce the risk of impact and pinching injuries.
• DuraHide leather palm provides extreme abrasion resistance.
• D3O palm padding absorbs and dissipates high-impact energy through the palm.
• Machine washable leather.

User questions & answers

Question:	Would these be good for handling boxes
Answer:	They are not reinforced. And yes.. they are the first thing to tear.
Question:	Do you have size small for son
Answer:	They are not advertised as cut resistent ANSI rating A1, maybe A2 on a good day. Better than no gloves, but not the best choice if you really need the protection.
Question:	How abraissain resistant are the palms
Answer:	I feel this item is not really designed for window installation, not that it isn't duerable but the size will require a special frame of wood to make it fit. Good luck
Question:	Are there more specific wash instructions? I washed them on hand wash and they still managed to come out with holes. Disappointed to say the least
Answer:	Yes. The dial sets the humidity level you want it to want it to operateat.

Product features

Mechanix Wear: M-Pact Leather Framer Work Gloves (Medium, Brown/Black)

Measure twice, cut once. Durahide M-Pact Framer work gloves are designed to protect professional carpenters with a functional fingerless design that delivers more dexterity when measuring, cutting and framing structures. The M-Pact Framer frees your thumb, index and middle fingers so you can handle your arsenal of tools with precision and control. Flexible Thermoplastic Rubber (TPR) protects the back of your hands with impact protection, and D3O palm padding reacts on impact to dissipate energy when you’re in full swing.

Features:

1. Thermoplastic Rubber (TPR) creates a secure fit.
2. Form-fitting TrekDry helps keep your hands cool and comfortable.
3. Durahide performance leather palm provides extreme abrasion resistance.
4. D3O palm padding absorbs impact and vibration.
5. Machine washable leather.

Intended Uses:

• Framing
• Carpentry
• Construction
• Roofing
• DIY Home Improvement

Product description

The Specialty Vent glove provides working hands with evaporative cooling on those sauna-like workdays with its fully ventilated design. The fully perforated palm combines with a breathable mesh back-of-hand to circulate air throughout the entire glove and keep your hands cool and comfortable while you work. Perforated synthetic reinforces high-wear areas of the thumb and index finger for added durability when using hand tools. The low-profile wrist closure creates a seamless fit to the wrist, while the micro-fleece thumb panel serves as a convenient place to wipe the sweat falling from your brow.

• Lightweight mesh eliminates heat build-up
• Low-profile Thermal Plastic Rubber (TPR) hook and loop closure provides a secure fit to the wrist
• Micro-fleece sweat wipe
• Fully perforated palm allows for maximum airflow
• Machine washable

User questions & answers

Question:	How do they hold up? I feel like if I use them to build my shed its going to tear at some corber
Answer:	Correct, this will be a good option to wear while doing oil changes.
Question:	Do they stretch
Answer:	I'm wondering the same thing, the newer version has the "grip nubs" closer together and smaller than the older version which would seem to address the issues of the nubs rubbing off. Also looks to be of a different material in the palm haven't been able to find them at retailers to compare...
Question:	Does the product include machine washing instructions
Answer:	No. Only in the backhand
Question:	should I order a size large (9) or should I jump up to an xl please
Answer:	these gloves are awesome...they are very sticky (nothing would slip using these). I use them when I hunt or I go to the range

Product features

Fully Ventilated

The Specialty Vent glove provides working hands with evaporative cooling on those sauna-like workdays with its fully ventilated design. The fully perforated palm combines with a breathable mesh back-of-hand to circulate air throughout the entire glove and keep your hands cool and comfortable while you work.

Wrist Closure

Low-profile Wide-Fit closure creates a snug fit to your wrist without hindering wrist mobility.

High Dexterity

The fully perforated glove design is lightweight and dexterous so you're always in control while you work.

TrekDry Breathability

TrekDry material provides evaporating cooling during hot work days to keep you cool and comfortable.