14 best stud finder app

Product description

The world's best stud finder has now gotten even better! Now supports Lath and Plaster with new smooth scanning strips and enhanced product casing. The Walabot DIY Plus detects metal studs, wood studs, wires, pipes and can show movement behind walls. The Walabot DIY Plus can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for DIYers and those who want real-time visual images of what is hidden within a wall.

• See it, don’t hear it! Use cutting-edge technology to see clearly inside your walls. Don’t just rely on a ‘beep’.
• See wooden studs, metal studs, pipes and wires.
• See movement and locate pests inside walls.
• Works on drywall and lath & plaster walls.
• Detects up to 4 inches (10 centimeters) into your walls.
• Automatically finds and shows the center of the stud.
• A mobile app offers continuous upgrades and feature improvements.

User questions & answers

Question:	does it work with a galaxy s
Answer:	AN SAE MEASURING WHEEL. I HAVE BEEN USING THIS DAILY OVER THE LAST TWO YEARS FOR FUMIGATION ESTIMATES. VERY WELL CONSTRUCTED AND ACCURATE.
Question:	Is it true that the app forces you to enter your google account and PW, to share your data with foreign companies, or else you cant use it
Answer:	The weight of the unit itself is approximately 4 pounds, 3 ounces. If you have any additional questions, please call our customer service team at 800-345-3766. Thank you!
Question:	Does it work through tile
Answer:	The metric version of this wheel is also available. It is the RRT12M. We also offer this is 10ths, which is the RRT1210.
Question:	What is the difference between Walabot and walabot plus
Answer:	Yes but product no well built

Product features

The Walabot Difference

See it, don’t hear it! Other stud finders beep to alert you that an object has been found behind your walls without showing you whether the object is a stud to drill into or a pipe or wire to avoid? Now you can be safe with the Walabot DIY Plus. Only Walabot uses cutting-edge radar technology to allow your smartphone to show you actually what is behind your walls.

Walabot DIY Plus Wall Scanner

Walabot DIY Plus is paired with an Android phone (see specifications for details) to produce a visual image of what is inside drywall and lath & plaster up to 4 inches (10 cm) deep. Your Walabot detects metal studs, wood studs, wires, pipes and can even find pests by showing movement behind walls. Walabot can be used by contractors, electricians, plumbers, carpenters, and those in need of advanced wall imaging capabilities. The advanced technology is also perfect for ambitious DIYers and those who want real-time visual images of what is behind a wall. It can show users what is in their wall in multiple modes (Image mode and Expert mode).

Image Mode: A visual image of metal and wooden studs, pipes, and wires.

To use image mode, hold the Walabot against the wall, calibrate and scan the wall. Walabot’s Radio Frequency technology will analyze the objects and using artificial intelligence, translate the results into images which are identified as wooden studs, metal studs, pipes, and wires.

Expert Mode: See the raw radar signals from the Walabot sensor

To use expert mode, hold the Walabot against the wall, calibrate and move over the objects seen in Pan and Image mode. Expert mode gives a direct view into the unfiltered Radio Frequency images. This image can show location in more detail, curves in pipes and wires, the intersection between two objects, pest movement in real time and can be used to confirm objects found in Pan and Image mode. You can focus the expert mode by managing the intensity bar to better see the objects.

• The Most Accurate Wall Scanner- Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires! In all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
• 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85~240 volt AC current for voltage and live electrical lines up to 2.36 inches
• Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound to detect the accurate location of stud metal Ac wires. When find the material, the LCD display will indicate the direction and the intensity of sound tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
• Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
• Professional Design with Top Quality - Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc.

User questions & answers

Question:	Is there an instruction manual online? I misplaced the manual that came in the box
Answer:	Si puede solicitar un manual de instrucciones en [email protected]
Question:	Will this locate studs behind bathroom tiles
Answer:	If your tile wall has cement backer board, then this device will not work. If your tile is backed by sheetrock, then it will probably work unless your tile is took thick. I wouldn't trust it to locate pipes behind tile, so take care if you're working in a bathroom.
Question:	Is the battery included
Answer:	No the 9volt battery is not included.
Question:	Can this detect a stud behind plaster walls
Answer:	This tud finder can quickly locate metal, studs, joists, pipes, live AC wire behind all kinds of walls floors and ceilings but except the cement board wall, you can use it on popcorn ceilings, plaster walls, textured surfaces,etc

Product features

Stud Scan Detection

Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Live AC Wire Detection

AC Wire detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. In all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: AC Wire Detection works in both StudScan / DeepScan / MetalScan Modes. The AC Wire Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

Product description

A good stud finder can be the difference between a successful DIY home project and disaster. When hammering or screwing things into walls, ceilings, and floors, you need to know what is on the other side. Otherwise, you might damage drywall or flooring with unsupported items you are trying to install. That is why a stud finder is important.



This VIVREAL stud sensor wall scanner includes a backlit LCD graphic screen for low-light conditions and auto-calibration that makes setup a whole lot easier. Electronic Wall Scanner has 4 modes to choose,

Stud scan: Locates the center and edges of wood and metal studs up to 3⁄4 in. (19 mm) deep.

Deep mode: Locates the center and edges of wood and metal studs up to 11⁄2 in. (38 mm) deep.

Metal scan: Detects metal (such as 1⁄2 inch rebar) up to 2.36 in. (60 mm) deep.

AC scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep.



How to use VIVREAL stud finder? Step 1: Press the button at the left side of device to power it.

Step 2: Slide the button on the middle of device to select one scanning mode.

Step 3: Place the device flat on the scanning surface. Then press and move it in a stable way. (Note: if you cannot scan the object from left to right, please try to scan up and down.)

Step 4: When the objected is found, the device will beep continually and a peck type will appear on the LCD display. Mark it with a pencil.



VIVREAL stud sensor has a beep alarm sound to tell you the “center states”. The directional indicators and the "center" signal keep users identifying the exact center of the stud, like arrow and edge on Electronic Wall Scanner LCD screen.



If you are a DIY home projector or professional contractor, VIVREAL stud finder is what you are looking for.

• Safe and Reliable. VIVREAL is committed to developing the reliable stud finder and helping you detect the hazard. No more worries about the annoying little things during decoration with the help of this stud finder. VIVREAL stud finder can help you find the edges and center of the objects easily and quickly. This wall scanner can detect the Live AC Wire in all modes. Our advanced technology enables accuracy detection to protect you from danger.
• Four Scanning Modes. VIVREAL stud finder provides four scanning modes. Depending on the tasks you have, you can switch to the desired mode. The stud scan is used for finding and locating the center and edges of wood or metal studs up to 3/4 in (19mm) deep; Deep mode can be used for scanning walls for 1 1/(2 ) in (38mm) deep; Metal mode locates and detects metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC scan locates live AC wires up to 2 in (51mm) deep.
• Graphical LCD Display.This multiple-function wall scanner detector has a graphical LCD display, which indicates many cues during detection, such as detection mode, signal strength, automatic calibration, battery indication with maximum readability. The low battery Indicator icon displays when the battery level is getting low, reminds you to replace a brand new 9-volt battery in time.
• Sound Waring.VIVREAL beam finder offers the beep alert. When you detect an object, it would beep continually. The loud sound warning together with the LCD screen helps detect the accurate location of the objects. Then a peck shape will display on the graphical screen. You can use the pencil to point to the location of the object. The audible and visible cues reliably keep users informed when an object, such as metal, studs, AC live wiring is found.
• Simple and Fast.The stud finder wall scanner can quickly find the edges and center of metal studs, pipes, rebar, joists behind walls, floors, and ceilings as well as the live AC wires. Fast detection saves users time and efforts, making the task easier. The button on the middle of the body is used for selecting from four scanning modes. The other button on the left side is to help you easily read the information on LCD screen and quickly detect the objects behind.

Product features

Metal Scan Detection

The STUD mode relies on density changes to detect, so it cannot be judged whether wood or metal is measured. Therefore, after using the Stud mode to find the subject, then adjust to the Metal mode to verify again. So in this way you can judge whether wood or metal is detected.

AC Wires Detection

Scan up to 2 in. (51mm) deep. For safety, in all modes such as wood stud finder, this wall scanner always detects and indicates the live AC wires. When live AV voltage is detected, the AC warning indicator will illuminate and protect your safety.

Stud & Deep Detection

The stud mode can scan studs behind the wall up to 3⁄4 in. (19 mm) deep.This wall scanner also provides a deeper wall scanning mode for 1.25 in. (38mm) deep studs. Both wood and metal studs can be found in deep mode.

Product description

CRAFTSMAN Stud sensor works on surfaces covered in wallpaper and fabric. Edge detection to help locate stud edges of both wood and metal stud.

• Depth range of 3/4 inch through drywall, works on surfaces covered in wallpaper and fabric
• Edge detection to locate stud edges of both wood and metal stud
• Shock resistant and water resistant body for durability and long life
• Takes 9 volt battery
• Full Lifetime Warranty, refer to "Warranty and Support" section below for full details
• Battery not included

User questions & answers

Question:	What kind of batteries does this need
Answer:	This unit takes a 9 volt battery
Question:	is it a good stud finder for mounting a TV
Answer:	No, it isn’t a good stud finder at all. Spend $10 more at Lowes for one that actually works.

• GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• 5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly
• WHY RECOMMEND TAVOOL STUD FINDER TO YOU: Tavool has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. Tavool stud finder not only gives you top quality and great accuracy, but also provide muti-functions to meet your practical needs on drywall, lathe wall, ceiling, plasterboard wall, wallboard etc.

Product features

Stud Scan Detection

This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan Mode first.

Metal Scan Detection

Tavool wall canner will locate metal studs in StudScan, DeepScan, and Metal Scan Modes. Since Tavool stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.

After you detect the center of a object, Please Use Metal Scan to determine if the previous reading in Stud scan was a wood stud, metal stud, or pipe.

Wire Warning Detection

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will flash when live, unshielded wires are detected.

Step 1:Calibrate the tool before every scan

After choose the mode, press and hold the scan button( on the side of the tool) to calibrate this tool. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Scan the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The narrow on the screen togather with the beep signal alter, guides you to find the location of the stud.

Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object.Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. (More details refer to the above description of "Metal Scan Detection")Then you can drill it to hang thing

• ➤The most accurate and higher safety - stud detector is specially designed! The most advanced sensor technology is used to accurately and quickly locate the metal pipes, fire lines, studs, wooden frames, steel bars and supporting beams hidden behind walls, floors and ceilings. Whether you are a professional, homeowner or DIY enthusiast, you can find a good use in this electronic screw scanner
• ➤The wall scanner includes five different scanning modes, suitable for metal tubes, fire lines, studs, wooden frames, steel bars and brackets, as well as ceilings, deep embedded objects behind walls. The bolt mode can detect wooden beams and joists in the dry wall, up to 1.5 inches. Metal mode can detect up to 3 inches of pipe. Depth mode detects up to 3 inches of wood and metal components, while 85 to 240 volts of AC current can be used for up to 2 inches of voltage and live wire
• ➤Auto-calibration and ergonomic grip, comfortable to use, before testing, please hold down the scan button for 1-2 seconds. Auto-calibration provides maximum reliability and accuracy for users. The ergonomic design of this wall stud detector enables it to be fixed from any angle
• ➤LCD screen upgrade design, display the required stud material and the exact position of the stud - Digital stud scanner with large LCD display and loud warning, can detect the exact position of the object. When the material is found, the LCD display will beep to tell you if you are close to the target. Fast detection saves time and energy for users and makes task completion easier
• ➤Professional Design with Top Quality - FOLAI has been dedicated to Research and develop stud finders for many years, and we have a professional team and mature productions process. This stud joist finder wall detector can quickly locate the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you find the exact stud while installing TVs, cabinets, garage shelves etc

User questions & answers

Question:	Will this work to locate stud, electrical, etc on exterior succo walls
Answer:	Yes.
Question:	You need to select stud size... but what if you don't know what size studs are in the wall
Answer:	The point of the arrow points where the stud is, regardless of the size of the stud.
Question:	will this work through plaster
Answer:	I used it in the bathroom and it worked well, I guess it would depend on how thick the plaster is ... if it works through drywall, you’d think it would work thru plaster
Question:	Does this work on a ceiling
Answer:	Should show studs through dry wall anywhere.

Product features

Stud Scan

We suggest you to use Stud Mode first to find the edges of wood and metal studs up to 3/4 inches (19mm) deep. If Stud Scan mode shows irregular readings or the Signal Strength indicator is weak, the studs might be behind more than ¾ inches (19 mm) of drywall.then switch to Deep Scan mode. This doubles the scanning depth to 1½ inches (38 mm) deep and allows for increased accuracy on deeper targets.

Metal Scan

Use this mode to locate and avoid hazards such as pipes behind walls. Metal Scan mode detects non-ferrous metal such as copper pipe up to 1½ inches (38 mm) deep, and ferrous metal such as rebar, up to 2.36 inches (60 mm) deep. You can differentiate between metal and wood studs through this mode.

First, find the stud in Stud Scan mode. Then, switch to Metal Scan mode, the tool alerts in a pattern as it detects the mental drywall screws in the wood for wooden studs.

AC Wire Scan

In this mode detect live, unshielded AC wires, electrical wires up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: Wire Warning Detection works in both StudScan / DeepScan / MetalScan Modes. The Wire Warning Detection Icon will flash when live, unshielded wires are detected.

1.Calibration

Place the unit flat on the wall, press and hold the scan button to start calibration, the decreasing bars will disappear and buzzer will beep one time and the calibration is completed.

2.Moving

Slowly slide tool across the wall. A bottom pointed arrow and EDGE indication will illuminate, indicating location of the stud edge.

3.Find Stud Center

Continue sliding the tool. When the center of a stud is located, the full bars on the Signal Strength Indicator, the pointed arrow on the top of the bars, the CENTER indication will all show and the buzzer will sound.

• 【4 IN 1 SCANNING MODES】 TACKLIFE stud finder DMS03 equipped with four scanning modes for wood, beam, joist, ferrous metals, AC wires and deeply embedded objects behind floor, ceiling, wall.
• 【ADVANCED ACCURACY】 Stud mode detects wooden beams and joists up to 1.5 inches (38 mm). Metal mode detects pipe, rebar, aluminum up to 4.0 inches (100mm) and non-ferrous metals up to 3.15 inches (80mm).Live AC wires up to 2 inches (50mm). Accuracy rate increased from 80% to 98%!
• 【UPGRADED LCD SCREEN & THREE SIGNAL LIGHTS 】 Instead of the traditional LCD screen, TACKLIFE DMS03 stud sensor equipped HD DISPLAY SCREEN which could show scan modes, detection depth, detection strength, battery level clearly. The signal light shows green when the detector get ready, as getting closed to the center of stud, the indicator will turn yellow to red.
• 【AUTOMATIC CALIBRATION & AUDIBLE WARNING】 The wall detector could calibrate automatically – no further action required! The fast detection saves users time and efforts, making the task completion easier. Audible warning which helps you avoid drilling or hammering into a water pipe or electrical wire.
• 【USER-FRIENDLY】 This metal detector with ergonomic design, which satisfying your DIY and home projects; the cotton on the back has prevented the damage caused to the wall. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner.
• 【WHAT’S INCLUDED】 1 x TACKLIFE DMS03 stud finder, 1 x User Manual, 1 x 9V Battery, 1 x Packing Bag, 2 year warranty. Our after-sales customer service is available in any time. Please feel free to contact us for help.

Product features

Scanning for wood studs

• Maximum detection depth: Exact mode:20mm; Deep mode:38mm.
• Wood detection mode will detect objects in gypsum drywall, plywood sheathing, bare wood flooring, coated wooden wall. Wood detection mode will not detect objects in concrete, mortar, block, brick work, plaster, carpeting, foil-faced materials, metallic surfaces, ceramic tile, glass, or any other dense material.

Scanning for metal objects

• Maximum detection depth: Ferrous metals: 100mm; Non-ferrous metals (Copper): 80mm.
• When the metal is detected, the screen will show the depth value synchronously, but if the signal is weak, or the tool cannot distinguish that the metal object is magnetic or non-magnetic, the depth value will not be displayed. The depth value is the distance from the center of the sensor to the scanned object. At the position of minimum depth value, the metal object is located near the center of the sensor.

Scanning for wires

• Maximum detection depth: 50mm (220V@50Hz / 110V @ 60 Hz).
• The signal strength of a “live” wire depends on the position of the cable. Therefore, apply further measurements in close proximity or use other information sources to check if a “live” wire exists.

How to find the stud

• Hold the tool straight up and down, position it onto the surface to be scanned, and do not rotate the tool.
• Press the mode button briefly to enter the wood stud detection mode, the symbol will flash on the screen. Do not move until the symbol stop flashing and the green light is on, automatic calibration of the tool is completed.

Step 2

• Move the tool uniformly and slowly over the surface without lifting it off or changing the applied pressure. During the scan , the tool must cling the wall, otherwise it will automatically calibrate again. Please wait for the symbol stop flashing and the green light to light up again and then move the tool.

Step 3

• When the tool comes close to a stud, the scale m and the percentage n will increase, the distance indicator l will appear. As the tool gets closer to the stud, the yellow indicator will light. As it detected the center of the stud, the red light is on.

Step 4

• To make the detection results more reliable, when the center is marked, please slide the tool across the wall again to check if the center is near the location of the highest percentage.

• 🌟 5 in 1 DEEP DETECTION FUNCTION: our wall scanner wood stud finder features 5 scanning modes respectively. Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. Helps you quickly & easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind walls, floors, ceilings
• 🌟 HELPFUL LCD DISPLAY & SOUND WARNING: this wall detector features a large LCD display & sound warning to help detect the accurate location of the objects. Saves you lots of time by displaying the desired stud center & the precise position of the stud
• 🌟 HIGHLY COMPATIBLE: our wall stud finder sensor is lightweight, long-lasting and convenient to use in your home, office, workshop. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🌟 AUTOMATIC CALIBRATION AND SIMPLE USE: turn on the stud finder and complete calibration by placing it on the wall. The finder will flash and beep once it has picked up the edge of a stud. Automatic calibration before using provides users with maximum reliability & accuracy
• 🌟 COMFORTABLE ERGONOMIC DESIGN: the ergonomic design means you can hold the wall scanner in your hand comfortably. Strong grip let’s you hold the electric stud finder tightly & keep it moving correctly to get more accurate results. Suitable for all types of people

User questions & answers

Question:	Is it hard to use
Answer:	Si.
Question:	Does it detect the pvc pipe on concrete wall
Answer:	I could not find one or a manual that could help determine this.
Question:	How long is the warranty period
Answer:	I must have a defective unit because I cannot switch between meters in inches… It will not work must have a defective item
Question:	Will it make sound when it finds stud
Answer:	I have tried this on my construction site where there is various stuff in the way. In direct sunlight, it will be accurate up to about 50’. After that, the laser can be barely seen. In the dark though, you can get to 300’ easy with good accuracy.

Product features

STUD SCAN AND DEEP SCAN

Use Stud Scan Mode to find the center and edge of wood or metal studs up to 1.5 in. (38 mm) deep.

In order to get the accurate results, please always start in Stud Scan Mode when looking for studs.

METAL SCAN

Wall scanner will detect metal up to 2.36 in. (60 mm) deep.

Use this Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

For maximum accuracy, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration complete, place against the surface to be scanned. Make sure to continue to hold the Power Button.

AC WIRE SCAN

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will show when live, unshielded wires are detected.

Product description

There are two tips to ensure the wall scanner never trick you again

1. Go slowly: To be effective, stud finders need to be properly calibrated. First, place yours on the wall and turn it on — you can usually do this by holding in a button. Let the stud finder read the density of the material (this will only take a second or two and you will hear the sound of " beep"), then slowly move it from side to side. Go back and forth over the wall a few times, starting from a different spot with each pass. Mark each stud you discover with a pencil. We recommend finding three and using a tape measure to make sure they are the same distance apart. This will help you avoid false positives.

2. Always double-check: After you have marked your studs and where you want to drill your holes, you should use something to poke into the wall to ensure you actually marked a stud. We would recommend doing this by hand, rather than using a power tool, as you will have a better feel for what’s inside the wall. You can also tap a small nail into the wall; get past the drywall without the nail “falling in” and you’ve found a stud. The last thing you should do before drilling is poke a little hole to the left and right of where you want to drill and make sure you are still on the stud. This will ensure you are centered on a stud, and not just clipping its side (and possibly hitting electrical wiring).

• 🔨 5 in 1 DEEP DETECTION FUNCTION: our wall scanner wood stud finder features 5 scanning modes respectively. Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. Helps you quickly & easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind walls, floors, ceilings
• 🔨 HELPFUL LCD DISPLAY & SOUND WARNING: this wall detector features a large LCD display & sound warning to help detect the accurate location of the objects. Saves you lots of time by displaying the desired stud center & the precise position of the stud
• 🔨 HIGHLY COMPATIBLE: our wall stud finder sensor is lightweight, long-lasting and convenient to use in your home, office, workshop. Makes all of your DIY home projects easier such as mounting your TV, bathroom cabinet, photo frame, garage racks etc.
• 🔨 AUTOMATIC CALIBRATION AND SIMPLE USE: turn on the stud finder and complete calibration by placing it on the wall. The finder will flash and beep once it has picked up the edge of a stud. Automatic calibration before using provides users with maximum reliability & accuracy
• 🔨 COMFORTABLE ERGONOMIC DESIGN: the ergonomic design means you can hold the wall scanner in your hand comfortably. Strong grip let’s you hold the electric stud finder tightly & keep it moving correctly to get more accurate results. Suitable for all types of people

User questions & answers

Question:	Can I use this wall detector to check the metal studs
Answer:	Thanks for your question. Yes, this stud finder wall scanner can easy locate metal studs on your wall. If you have any other questions, please feel free to contact us: [email protected]
Question:	I want to find stud behind the wall, is it hard to use
Answer:	Thanks for your question. Our wall scanner wood stud finder has 5 scanning modes . Includes 1/2” stud scan, 1” stud scan, 1.5” stud scan, metal scan & AC scan. It can helps you quickly and easily locate wood, metal studs, joists, beams, metal pipes, rebar & live AC wire behind your walls. If you have any other questions, please feel free to contact us: [email protected]
Question:	Will this stud finder locate metal studs
Answer:	Thanks for your question. Yes, our wall scanner stud finder can help you easily locate metal studs behind your walls. If you have any other questions, please feel free to contact us: [email protected]
Question:	I want to install the TV wall mount, can I use this stud finder to locate wooden stud
Answer:	Thanks for your question. Yes, you can use this stud finder wall detector to locate wood studs in your wall. If you have any other questions, please feel free to contact us: [email protected]

Product features

5 IN 1 STUD FINDER WALL SCANNER - MAKE YOUR DIY HOME PROJECTS EASIER

Step 1: Calibrate the device before every scan

After choose the mode, press and hold the scan button( on the side of the device) to calibrate this device. Wait for the reducing bars disappeared and beep to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ;In AC/Metal mode, put it in the air to calibrate it.

Step 2: Move along the wall

Hold down the button, then move the stud finder along the wall slowly, if shake or lift the scanner accidently, the device needs to be re-calibrate.

The arrow on the screen will guide you to find the direction of the stud.

Step 3: Find the center of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud. Then you can drill it to hang things.

STUD SCAN AND DEEP SCAN

Use Stud Scan Mode to find the center or metal studs up to 1.5 in. (38 mm) deep.

DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud.

In order to get the accurate results, please always start in Stud Scan Mode when looking for studs.

METAL SCAN

Wall scanner will detect metal up to 2.36 in. (60 mm) deep.

Use this Metal Scan Mode to locate and avoid hazards, such as pipes, behind walls and determine if a stud is wood or metal.

For maximum accuracy, press and hold the Power Button while holding the scanner away from the surface. Once a short beep sounds confirming calibration complete, place against the surface to be scanned. Make sure to continue to hold the Power Button.

AC WIRE SCAN

Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep.

For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire.

Note: WireWarning Detection works in both StudScan / DeepScan / MetalScan Modes. The WireWarning Detection Icon will show when live, unshielded wires are detected.

• Reliability and Consistency: 2019 latest stud finder with multi-sense technology which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Whether you’re hanging a picture, mounting a TV, renovating part of your home, Jurgen K stud finder is a must-have tool you need.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. The stud scan features 5 mode: 1/2 inch(13 cm), 1 inch (25 mm) and 1.5 inch (38 mm), Metal scan (60 mm)and AC scan (51 mm). Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowners, and DIY enthusiasts, it must be an ultimate choice.
• High Performance: Easy-to-read LCD screen displaying the desired stud material as well as the precise position of the stud. when the device detects an object, it will beep continually and a peck shape will also display on the LCD screen. This wall scanner features a bright, backlit LCD display and a low battery indicator informing you when your battery should be replaced for optimum performance (include 9V battery).
• Ergonomic Grip & Auto Calibration: The ergonomic anti-slip grip and top-grade plastic frame provide users with comfort and convenience while scanning. calibration before using provides users with maximum reliability and accuracy. Firstly place it flat on the wall, secondly, turn on the Power Button, then hold the Scan button to start calibration, It is completed when the BEEP sound and screen shows disappear.
• This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors, and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	If there's a live wire, what does that look like on the display screen
Answer:	It couldn't locate studs through an inch of sheet-rock so i would bet no.
Question:	Will the TH530 work on textured wall surfaces, acoustic ceilings, or wall paper
Answer:	Yes, it work well on popcorn ceilings
Question:	I'm planning to mount my new flat-screen TV to the wall. Will this tool help me
Answer:	Yes, i found the wires in the wall with this device.
Question:	Will this stud finder locate metal studs
Answer:	Yes, it is accurate and easy to use. with this stud finder, I was able to install my new TV mount at ease.

Product description

Upgraded 5 in 1 stud finder from JAXWQ provide users with more wider detect performance, more accurate and deeper detect range.



1.Feature:

Ergonomic anti-slip handle provide comfort and control of the tool.

Intelligent Microprocessor chip, get the most accurate and fast results

HD graphical LCD display Audio Alarm

Auto-calibration function to provides users with maximum reliability.



2.How to use JURGEN K stud finder?

Step 1: Calibrate the tool before every scan

Choose the scan model at first, then place unit flat on the wall, press the power button to power on, press the Scan button(on the right side of the tool) to start calibration. Wait for the reducing bars disappears and beeps to confirm calibration has completed.

In stud/deep mode, put it on the wall where you want to detect to calibrate it ; In AC/Metal mode, put it in the air to calibrate it.

Note: It is important to wait for calibration to complete (2–3 seconds) every time.



Step 2: Start to scan

After Calibration, then moves the stud finder along the wall slowly, The narrow on the screen together with the beep signal alter, guides you to find the location of the stud.

Note:

1. if shake or lift the scanner coincidentally, the device needs to be re-calibrate.

2.if you can not scan the object from left to right, please try to scan up and down.



Step 3: Find the location of the stud

When the signal bar is full and the beep alarm is loudest, it means you have found the center of an object. Mark it with your pencil.

Then choose the Metal Scan mode to test whether it is a metal. After you confirm that it is not a metal, it means that you found the center of a stud.

• Accurate and Rapid: The stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings. Fast detection saves users time and effort, making the task completion easier. No matter professionals, homeowner and DIY enthusiasts, it must be an ultimate choice.
• 5 in 1 Multi-function Detection: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep; medium scan locates the center and edges of wood and metal studs up to 1 inch deep; Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep; Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep; AC scan detects live unshielded AC wires up to 2 inches deep.
• Digital LCD Display & Audio Alarm: This stud finder comes with large LCD display and sound alarm, which can detect the exact location of the objects. When find the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. This LCD also features back-lit function which can provides a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication ect.
• Easy to Use & Auto Calibration: Easy-to-read LCD display and ergonomic anti-slip handle provide users with comfort and convenience while scanning. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs in one step. This function provides maximum reliability to the user, greatly reduces errors in the application, and ensuring that most objects behind the wall can be detected.
• Wide Use: This stud detector quickly locates wood, metal and AC wires hidden in the walls, floors and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling, painted walls, etc. helping you avoid danger when installing TVs, cabinets, garage racks, etc.

User questions & answers

Question:	Can this unit locate studs through ceramic tile
Answer:	Yes, its accuracy left a deep impression on me.
Question:	Will it work on popcorn ceilings
Answer:	Yes, I successfully found the stud behind the wall.
Question:	Is it able to detect live wires in the wall
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Please choose the mode you need, follow the instructions, super easy to operate.
Question:	Is it accurate
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } yes

• FOUR SCANNING MODES: This Preciva stud finder has FOUR scanning modes, the stud scan, the deep mode, metal scan, and the AC wire scan.You can switch the modes as you like.
• LCD BACKLIGHT DISPLAY: This multifunctional wall scanner detector has a graphic LCD display which can indicate the scanning modes, signal strength, automatic calibration and remaining battery indicator. The stud finder also features a backlight for use in the dark.
• AUTOMATIC CALIBRATION: This wall detector could calibrate itself automatically. you can calibrate it by placing the device on the wall where there are no studs, metal or AC wire. The stud finder features a calibration indicator to avoid making mistakes and increase the detection accuracy.
• SOUND INDICATION: This stud finder wall detector provides a beep signal alert, which could remind you of the position of the stud. If there is a stud,metal or AC wire, you can know the position quickly and clearly.
• WHAT YOU WILL GET: You can get a STUD FINDER, a 9 V battery and a user manual.if there are any problems with our products - just contact us directly.

User questions & answers

Question:	Can this find studs behind a tile wall
Answer:	Yes if the wall plug supports the machine plug,otherwise you will have to use the conversion line which comes with the cut50.
Question:	does this have a level
Answer:	It is a HF-ARC start plasma cutter,I would not use with that.
Question:	Does this have a level
Answer:	I don’t have the answer
Question:	where is this made
Answer:	Hi,this cut50 is a touch arc plasma cutter

Product features

Preciva Wall Stud Finder Wall Scanner

• Specifications:
• Product name: Preciva wall scanner stud finder
• Color: Purple
• Material: ABS
• Package list:
• 1x Wall Stud scanner
• 1x 9V battery
• 1x User Manual

FOUR SCANNING MODES

• Maximum Detection Depth:
• Stud Mode: 3/4 in (19mm)
• Deep Mode: 11/ in (38mm)
• Metal Mode: 21/ in (60mm)
• AC Wire Mode: 2 in (51mm)

STEP 1

• Press the Button at the left side of the device to power it.

STEP 2

• Slide the button on the Middle of the divice to selecting the scanning modes.

STEP 3

• Place the divice flat on the scanning surface, then press and move it in a stable way.
• When the object is found, the divice wil beep continually and there will be a display on the LCD screen, Mark it with a pen or pencil.

Product description

Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.

Bosch’s GMS120 digital multi-scanner provides detection of multiple materials, including wood, metal, and live wiring. Because of its versatility and consistent performance, it’s an ideal tool for construction, electricians, contractors, carpenters, masons, plumbers, and others who need reliable detection.

GMS120 Digital Multi-Scanner At a Glance: Three available modes: wood, metal, wiring Automatic calibration, automatic center finder Detect steel at up to 4-3/4-inches deep in concrete Illuminated display for mode, detection strength, and more Audible detection signal with an on/off button

Bosch’s GMS120 digital multi-scanner has three detection modes and a bright LCD display (view larger.)

Consistent Material Coverage

With its three modes, Bosch’s GMS120 digital multi-scanner is an aid in most situations, as its modes cover wood studs, metal objects such as rebar, studs, and steel/copper pipes, and live wiring. It has precise automatic calibration that makes use easier and an automatic center finder, which pinpoints the center spot of the wood or material that has been detected.

Deep Detection

The GMS120 has a deep metal detection feature, which allows a user to detect steel that is placed up to 4-3/4-inches (120 mm) deep in cured concrete. It has a maximum detection depth of up to 2 inches for live wiring, up to 3-1/8 inches for copper, and up to 1-1/2 inches for wood studs.

User-Friendly Features

Bosch’s GMS120 digital multi-scanner provides an illuminated ring that indicates detection status and an audible detection signal with an on/off button. Adding to the user-focused design, its bright and readable illuminated graphical LCD display indicates mode, detection strength, and more, making it simple to check the detection device and switch modes and tasks. In addition, its ergonomic soft-grip provides a comfortable grip that’s secure and safe.

Dimensions and Warranty

The Bosch GMS120 digital multi-scanner measures 10-1/4 inches by 3 inches by 6-1/2 inches and weighs .6 pounds. It comes with a two-year warranty.

What's in the Box

One Bosch GMS120 digital multi-scanner, hand strap, one 9-volt battery, and carrying pouch.

Bosch’s GMS120 digital multi-scanner detects multiple materials, has a user-friendly design, and easy detection status checking (click each to enlarge).

From the Manufacturer

Bosch GMS 120 professional multi material cable detector, complete with protective bag. The most convenient multi-functional scanner for construction applications. Includes: hand strap, 9-Volt battery and carrying case.

• Detection: The Bosch GMS120 Digital Wall Scanner features multi mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring
• Performance: Features the latest 3 sensor laser technology, offering a wide range of detection performance of up to 4 3/4 Inch deep in cured concrete, up to 2 inches for live wiring, up to 3 1/8 inches for copper and up to 1 1/2 inches for wood studs; The accuracy of the product is 0.0625
• Self calibrating: Includes 3 selection modes for wood, metal, and AC wiring; The GMS120 offers automatic calibration from the start and continues to self calibrate through the course of the project for easy and precise detection
• Display: Features an illuminated graphical LCD display to indicate mode, detection strength, and more; The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range
• Center Finder: This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button

User questions & answers

Question:	Does it scan through stucco
Answer:	I have not checked metal consume but it has metal detecting which you may use
Question:	Can this detect rafters through asphalt and/ or metal roofing
Answer:	The only requirement is good batteries. The unit worked well for me for installing a grab-bar in my walk-in shower.
Question:	Does the GMS120 detects water pipers hidden in concrete
Answer:	Yes. If she is a steel stud or a wooden stud.
Question:	Does anybody know if the Bosch GMS 120 is exactly the same as the one sold in Germany. I need it to detect power supply lines (230V) and water lines in brick walls 50mm deep. Anybody has any info if these are made specifically for the US market
Answer:	Hi there, Thanks for getting in touch. Please contact us for more customer support via email: [email protected]; phone: 1-8335065666. Best Regards, Customer Service

Product features

GMS120 Digital Wall Scanner

The Bosch GMS120 Digital Wall Scanner features multimode detection capability. The tool is able to detect wood studs, metal objects or live wiring in floors and walls, so users can figure out what they are up against before they start a job. It has a deep detection mode for pipe in concrete of up to 4-3/4 inches. Because of its versatility and consistent performance, it's an ideal tool for construction, electricians, contractors, carpenters, masons, plumbers, and others who need reliable detection.

Includes

digital wall scanner, hand strap, 9-volt battery, carrying pouch

Multimode object detection

The Bosch GMS120 Digital Wall Scanner features multimode detection. The user can find wood studs; metal objects, such as rebar, metal studs or steel/copper pipe; or live wiring in floors and walls. To remove worry, the scanner self-calibrates once the user starts detection and continues to self-calibrate during detection.

Informative graphic display

The backlit graphical display on the scanner indicates mode, detection strength and more. The tool provides easy-to-view and understand information. The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range.

Deep detection

The Bosch GMS120 has a deep metal-detection feature, which allows a user to detect steel that is placed up to 4-3/4 inches deep in cured concrete. It has a maximum detection depth of up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs.

Center finder

The Bosch GMS120 Wall Scanner includes a center finder that pinpoints the center of an object. It includes a convenient marking hole for easy reference marks, and audible detection signal that switches on and off. It also has an ergonomic soft-grip that's comfortable to use.

The Job Just Got Easier

With Bosch laser technology, users are able to be more productive and more profitable – with greater accuracy and precision on the job site. By offering an extensive range of line lasers, laser measures, rotary lasers, point lasers, digital levels, optical levels and measuring tool accessories, Bosch is able to provide solutions for a wide variety of applications. With Bosch measuring tools users are able to work smarter, not harder.

• YOUR GOOD HELPER - The stud wall scanner can quickly locate the metal nails, tubes, steel bars, and the beams on the walls, floors, and ceilings, as well as the edges and centers of the AC wires, help you avoid hazards while installing TVs, cabinets, garage shelves etc. Whether you are a professional, homeowner or a DIY enthusiast, the fast detection of this wood finder can save much of your time and efforts
• FOUR SCANNING MODES - The stud finder provides four scanning modes in total for detection. Depending on the tasks you have, you can switch to the desired mode. The STUD SCANNER is used for finding and locating the center and edges of wood or metal studs up to 1 in (25mm) deep; DEEP MODE for scanning walls for 1 1/(2 ) in (38mm) deep; METAL SCAN for locating and detecting metal (such as 1/2 inch rebar) up to 2 1/(4 )in (60mm) deep; and AC SCAN for locating live AC wires up to 2 in (51mm) deep
• LARGER LCD SCREEN - The digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. Informative graphic display guarantee you know what's behind the wall before you take on the job, avoiding troubles and hazards
• CALIBRATION BEFORE USE - Place the wood stud finder against the wall, then turn on the stud finder and press the scan button to start calibration, the calibration is completed until the BEEP sound and screen shows disappear. The calibration before using provides users with maximum reliability and accuracy.(NOTE: It's important to wait for calibration to complete within 2-3 seconds every time before moving the scanner)
• No Risk Purchase - 1 x Stud Finder, 1 x 9V Battery, 1 x User Manual; Please contact us if you have any questions for the stud locator under normal use in one year, we will fix it for you within 24 hours

User questions & answers

Question:	This will find the nails behind the kitchen tiles
Answer:	Don't know, only tried through drywall
Question:	Which country is this made in
Answer:	There is no physical or electronic leveling device or indicator I can see.
Question:	Will it find metal studs as well
Answer:	No it does not
Question:	Will it make sound when it finds stud
Answer:	Made in China

Product features

Metal Detection

Use metal scan to determine if the previous reading in stud scan was a wood stud, or pipe. In metal scan, only metal drywall screws will be found in wood studs, while metal will be indicated everywhere on a metal stud or pipe.

Metal scan has interactive calibration to adjust its sensitivity to metal, which can be used to find the precise location of metal objects in walls, floors and ceilings. Maximum sensitivity is ideal for quickly finding the approximate location of metal. However, sensitivity can be reduced by calibrating the tool closer to metal. With reduced sensitivity, the area where metal is indicated will be smaller. But in both cases, the metal target is in the center of the area where the tool indicates metal is present.

AC Wire Detection

As with Metal Scan Mode, AS Scan Mode has interactive calibration and works in the same manner. AC WARNING detection feature works continuously in stud 1/2 in. stud 1 in. stud 1 1/2 in.scan and metal scan modes. While live AC VOLTAGE is detected, the AC detection warning indicator will appear in the display. If scanning begins over a live AS wire, the AC wire Warning will show continuously. Use extreme caution under these circumstances or whenever live AC wiring is present.

WARNING: Electrical field locators may not detect live AC wires if wires are more than 2 in. (51 mm) from the scanned surface, inn concrete, encased in conduit, present behind a plywood shear wall or metallic wall covering, or if moisture is present in the environment or scanned surface.

Step 1: Calibrate before every scan

Always on Stud 1/2 in. scan with the scanner placed flat against the wall. Press the mode switch button to the mode selected, place the tool flat against the wall, then press the scan button. Wait for the reducing bars disappeared and beep to confirm calibration has completed before moving scanner

Step 2: Scan the wall

Slowly slide scanner across surface. A bottom pointed arrow and EDGE indication will illuminate, indicating location of the stud edge

Step 3: Find the location of the stud

Continue sliding tool. When the center of a stud is located, the full bars on the signal strength indicator, the pointed arrow on the top of the bars, the center indication will all show and the buzzer will sound.

In case of deeper studs(thicker walls), when the center of the stud is located, not full bars will show on the screen. If you still can't locate a stud, try stud 1 in. or stud 1 1/2 in. stud mode.