13 best quiet check valve home depot
Sure, a quiet check valve is a component used in plumbing systems to prevent backflow of water. At Home Depot, you can find a variety of quiet check valves designed to minimize noise during operation. These valves are commonly used in power water pumps and other plumbing applications. They are part of the water pumps, parts, and accessories section in the rough plumbing category at Home Depot. The goal of these valves is to maintain water flow in one direction while preventing water from flowing back into the system, ensuring efficient and quiet operation.
Below you can find our editor's choice of the best quiet check valve home depot on the market
Zoeller 1.5" PVC Quiet Union Check Valve
Zoeller
- Zoeller 30-0040
- PVC Quiet Union Check Valve
- 1.5
- Model number: 30-0040
- included components: Unit
- Instruction Guide
User questions & answers
| Question: | Is the valve gate spring loaded or passive |
| Answer: | It’s spring loaded. It’s a great product. The other valve I had was so noisy it drove me crazy. This valve is so quiet I hardly know my pump is running. |
| Question: | What is the inner/outer diameter of this valve |
| Answer: | It is for 2 inch pvc pipe, but you could possibly use adapors, if needed |
| Question: | does it work for the pool spa |
| Answer: | It should |
| Question: | Pressure rating? I need 70psi or more |
| Answer: | The valve is rated at 50 psi. |
Checkvlv Quiet 2"Hc Wht
Magic Plastics
Product description
Magic Plastics 2 in. Plastic Quiet Check Valve
- Color: White
- Size: 2'
- Hose clamp connections
User questions & answers
| Question: | I have brass pipes & an iron slip-on check valve with black rubber caps tightened with 4 clamps. do i just slip this on the pipes & tighten |
| Answer: | I installed a check valve on 2" pvc pipe. If your pipe is the same diameter as 2" pvc it should slip on and tighten. The valve works well. |
CHECK VALVE QUIET CLR 2" by BRADY MfrPartNo 0823-20C
Brady
Product description
Magic Plastics 2 in. PVC Quiet Check Valve
- CHECK VALVE QUIET CLR 2"
User questions & answers
| Question: | Can this be buried |
| Answer: | Yes, but it’s not constructed of the type of materials designed for the purpose or that will endure well buried in earth. |
| Question: | What is the minimum lifting pressure required |
| Answer: | I am not sure of the minimum lifting pressure. I attached to my waste pump and it works great. I would guess at least 10 to 15 psi as the spring holding the check valve is not that big, this is a guess! |
| Question: | Can i use this valve to stop roedors entering the pipe..... if i washed my hands for example, will that water can be able to open the valve |
| Answer: | It should work for that. |
Zoeller 30-0181 PVC Plastic Check Valve, 1-1/2 Inch
Zoeller
Product description
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
- 1-1/2 slip x slip unions
- Flapper bends over a radius to eliminate sharp 90-degree edges
- Capable of vertical or horizontal installation
- Slip x slip for 4.3 PSI (10 feet of head) at 130°F
- Designed to reduce water hammer
User questions & answers
| Question: | Would it fit a 1 1/4 pvc |
| Answer: | It depends on what your system looks like. This will do the job beautifully if you have enough space, but it is pretty big. . .almost a foot long and about 2" across. I use it as part of a system for a small orchard, and it works great there. |
| Question: | Most sump pumps come with built-in check valves now. Why does Amazon recommend this item to be purchased with a sump pump that has its own |
| Answer: | Most of what I've read and seen have the check valve slightly above ground level. Do your install with a union so that you can remove (i.e., replace) things without having to cut pipe. Remember to drill a small (1/8" or 3/16") in the pipe between the pump and the check valve to prevent airlocks. Drill so that the 'leak' squirts downward! That said, some people argue to put the check valve immediately above the pump (below ground level). Installing just above the pump would minimize the amount of water leaking back into the sump (but we're talking less than a quart, I'd guess.). Mine is installed just above ground level. |
| Question: | Can I use the Zoeller 30-0181 check valve, 1-1/2 inch on my lawn pump system |
| Answer: | It does not specificaly state Water or Gas, but it does say "Fluids" and it has brass, stainless internals with viton seals (Flourocarbon) - so if your liquid is compatable with those materials, it will most likely work fine. |
| Question: | Should I install this low to the floor close to the basin or higher up on the pipe closer to the discharge point |
| Answer: | The CFM for any air flow passageway depends upon the pressure (psi) within the flow. Without stating the pressure, the question cannot be answered. |
Jackel Sewage Check Valve (Model: 2GPFF) Black
Product description
The latest in Jackel's vast check valve offering, the Jackel-2GP-FF sewage pump check valve passes a full 2" solid. Utilizing our innovative ABS body and our own adapters, the Jackel-2GP-FF is certain to become another icon in the Jackel line.
- All stainless steel clamps
- Passes a full 2" solid
- Size: 2" (Adapters)
- Max. Operating Pressure: 45 PSI
- Material: ABS (Body), PVC (Adapters) and 301 Stainless Steel (Clamps and Fasteners)
User questions & answers
| Question: | What is the length of this product |
| Answer: | Just over 10 inches this includes the 2 rubber pipe connections |
| Question: | for horizontal installations, is the flapper's heavy end opposite the Jackel label so, label up for an install ?? Thanks |
| Answer: | This valve should only be installed vertically. |
| Question: | Can this 2" check valve Jackel be put on a sump pump with a 1 - 1/2 inch with a 2 " adapter of some kind like a Jackel adapt. 1-1/2 to |
| Answer: | Yes you answered your own question. Any hardware store should have the 2" to 1 1/2" reducer. Call Jackel if you want it from the horse's mouth. They are very helpful. |
| Question: | So just to be clear on my previous questions, you're saying i should not expect to hear the "thud" of water hammer with this check valve |
| Answer: | No you should not |
Campbell Mfg Llc 2" Quietsewage Chk Valve B-0823-20C Well Supply Accessories
Campbell
Product description
2', Quiet Sewage Check Valve, No Slamming When Flapper Closes, Clear Heavy Duty PVC For Monitoring Check Valve Operation, True Union Design Allows For Easy Repair Or Pump Replacement, 1/2 LB Stainless Steel Spring, Solvent Weld Connection To Piping.
- Brady B-0823-20C 2" QuietSewage CHK Valve
User questions & answers
| Question: | is this clear or white? i need the clear type |
| Answer: | We bought two and both are exactly as pictured. White connections with the actual valve visible through clear plastic. |
| Question: | Will I need to apply PVC cement to this valve's connections, or do they work like 'unions' where I may twist the valve off |
| Answer: | It has both, but you will need to apply cement at the ends. Once the ends are cemented the housing can be twisted out (for replacement or cleaning if needed). The ends are typically not tight fitting so you will need to build up a good layer of cement. |
| Question: | I just bought a Liberty Pump Pro 370 1/2 HP Sewage Pump System. Will this work with a standard sewage ejector or is it only for a grinder pump |
| Answer: | It will work with any 2" discharge sewage, effluent and/or grinder pump. This CV is very well made and the best part is... no more banging! |
| Question: | I have copper pipes. Can this be mounted with rubber hose and clamps |
| Answer: | As long as the rubber is rigid enough & your connections are tight as well as the vertical rise maintains level. Keep in mind that rubber may absorbe odors that pvc does not. If you are draining just water then fine. I'm draining effluent/sewage/grey water & related items. |
Campbell Check Valve Quiet CLR1.5 by Brady MfrPartNo 0823-15C, White
Campbell
Product description
'Silent Check Valve, Material of Construction Clear PVC, Size 1-1/2 In., Connection Type Slip x Slip, Length 3-1/4 In., Width 3-1/4 In., Overall Height 9 In., Max. Water Pressure 150 psi @ 72 Degrees F, Cracking Pressure 300 psi, Max. Temp. 120 Degrees F, Mounting Position Any, Seat Material PVC, Spring Material 316 Stainless Steel, Seal Material Buna N, Flow 100 gpm'
- BRADY
- Package Length: 10.8"
- Package width: 13.79"
- Package Height: 24.41"
User questions & answers
| Question: | Does this come apart into three pieces, the valve and the two ends |
| Answer: | Yes, and it also can be mounted at an angle. The plumber that installed mine told me that they are quietest when installed at 45 degrees, with the flap opening up. This valve is almost silent!! |
| Question: | can I use this valve for injection sewer pump |
| Answer: | I just received 2 of these valves and as the other answers have stated this valve has disconnect nuts on each end. The 1 1/2 schedule 40 PVC fits inside the couplings and then permanently glued. Having rubber couplings would be more for noise/vibration isolation and not 100% necessary. If the valve had to be replaced in the future , u would be limited to the same valve or require re-configuring the connections for a different style valve. In my opinion it would make sense for the manufacturer to have a 1 1/2 connections already in place on both ends. |
| Question: | Can this valve be installed horizontally |
| Answer: | The two ports are the in and out ports that connect to the pipe. |
| Question: | Can I install with rubber couplers instead of gluing PVC? This would make replacement easy if necessary in the future |
| Answer: | You have to clean and glue slip joint side of fitting to 1 1/2" PVC pipe above and below, you then can tighten threaded quick connect part of fitting to check valve. Just remember to correctly measure for distance between glued slip joints, so you can install and remove threaded fittings of check valve if you need to. |
Checkvlv Quiet 2"Hc Clr
KEXMY
Product description
2". Clear. Hose clamp connections.
- Hose clamp connections
- Clear
- 2"
User questions & answers
| Question: | Can this be installed vertically or is it strictly for horizontal installation |
| Answer: | Ours is installed vertically. |
| Question: | Does this come with the rubber couplers?Also will this fit 1 1/2 in pipe without glueing |
| Answer: | Yes is come with the rubber couplers. No it will not fit 1 1/2 pipe, it's made for 2"; you can get a 1 1/2 to 2 PVC coupler at the hardware store though. |
| Question: | Will this work with a sewage ejector |
| Answer: | I use mine as a check valve after my sewer lift pump and works fine. |
Ay McDonald 4420-465 2069 1 1/2- Inch Silent Sump Check Valve
AY McDonald
Product description
Rubber Hose Coupling: Valves are designed to fit on standard sump pump line connections. Easy to install over 1 1/2" or 1 1/4" PVC pipe (schedule 40 & 80), steel pipe, or copper tubing. One piece housing construction, no gasket to fail or leak. Housing is.
From the Manufacturer
Rubber Hose Coupling: Valves are designed to fit on standard sump pump line connections. Easy to install over 1 1/2" or 1 1/4" PVC pipe (schedule 40 & 80), steel pipe, or copper tubing. One piece housing construction, no gasket to fail or leak. Housing is
- Eliminates the typical hammering of a sump check valve after the pump cycles
- All valves are pressure tested to ensure Leak-proof performance
- Stainless steel clamps included
User questions & answers
| Question: | Why does mine still sound same as old valve why |
| Answer: | Your noise is probably not coming from the check valve closing, |
| Question: | Can this be installed horizontally |
| Answer: | Good question. the 'closure' of the device rely s on water pressure in the output water line ABOVE THE UNIT. I don't think it would work properly in a "horizontal" position since there is no downward pressure on the valve. I have used two of these units, the first lasted 3 years; I really like the "quiet" operation. |
| Question: | Will this work with 10ft of tubing behind it |
| Answer: | It should. Works well for me. |
| Question: | Title says 1/2"? description says 1 1/4" or 1 1/2". but 2" checke valve also says 1 1/4 or 1 1/2. the1 1/2" clear is sold out. please verify size |
| Answer: | This is a 1 1/2 in check valve. I bought it not knowing and I assumed it was 1 1/2 and was right. Hope it helped. Used for sump pump. |
Zoeller 30-0041 50 psi PVC 2-Port Check Valve, 1-1/2"
Zoeller Pump
Product description
Zoeller 30-0041 50 psi PVC 2-Port Check Valve, 1-1/2"
User questions & answers
| Question: | i've never seen one that says two ports. what are the two ports about |
| Answer: | The spring feels tight, but I am pretty sure it will work on the supply side of a pool. I use it on a pump up basement sink pump. I believe that the pressure and volume on a pool pump is greater. |
| Question: | how does this connect to the pipe above and below? by cementing it to PVC or by tightening it up with a wrench |
| Answer: | Yes mine is installed on a 45 and just above pit so i can visually see water and flap opening at a glance without removing pit cover |
| Question: | Has anyone used this check valve on their pool? I just received mine and I am a little worried that the spring is kind of tight |
| Answer: | I purchased this check valve for use on my well pump. It's installed for over two weeks and seems to work as designed. |
| Question: | can it be installed on a 45 degree diagonal |
| Answer: | Not sure about your application but specs/Google are your friend: "Maximum back pressure: ≥ 300Kpa" which equals 43.511 pounds-force per square inch. |
Simer 2925B Self-Contained Above-Floor Corrosion-Resistant Sump/Laundry Sink Pump, 1/4 HP, 115V, 1-1/2" Discharge Pipe, Handles Solids Upto 1/8", 6 Gallon Drainage Tank, Black
Simer
Product description
Sump/Laundry Sink Pump.
From the Manufacturer
Sump/Laundry Sink Pump.
- Compact contained sump pump
- Easy under-sink installation
- 1-1/2" Discharge pipe size
- Handles solids up to 1/8"
- horsepower is 1/4 HP
User questions & answers
| Question: | How high and how far will it pump |
| Answer: | The specifications state the following pumping rates, in GPH, for the following total lift: 2280 @ 5 ft, 1620 @ 10 ft, 660 @ 15 ft, and no flow at 18 ft I would think distance is not much of an issue in a residential application as the discharge should go up more or less vertically and then drain down per code requirements as with any other drain pipe installation. As a follow up to my install, lift required is about 6 ft and the unit has worked exactly as expected and I would definitely recommend the unit. |
| Question: | Why does my wet bar pump under the sink does not stop running |
| Answer: | I think you need a check valve installed. It allows the water to pump out, but prevents backflow back into the basin causing your pump to cycle on and off. |
| Question: | What is the noise level |
| Answer: | Medium noise level. |
| Question: | Is this the 2925B (Discontinued Model) Or the 2925B-02 (Current Model)? If the 2925B, What is the GPM rating at 10 ft of head |
| Answer: | The 2952B has a manufacturer rating of 1620 GPH at a 10 foot head. Hope this helps. |
Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp
Zoeller
Product description
Foeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller. 9ft. power cord. Truly a all star pump. Powder coated epoxy CI and SS fasteners. Oil filled motor with thermal overload. CSA UL SSPMA
From the Manufacturer
When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.
- 3/10 HP pump for residential sump pits or septic tanks
- 1½" discharge, passes 1/2" spherical solids
- Automatic model with integral float-activated switch
- Cast iron switch case, motor, and pump housing, plastic base
- Performance: 43 GPM at 5' TDH, shut-off: 19.25' TDH. 100% factory tested
User questions & answers
| Question: | Should the pump run all the time |
| Answer: | no it should not run all the time it has a float that shuts it off when the pit is near empty. The float arm might be stuck if it doesn't stay up then it's time to replace |
| Question: | what is the lift rate limit, will it lift 11' vertical |
| Answer: | I do not know the actual lift rate -- My pump pumps up 9' then pump the water 150' away from the basement and when the water comes out the pressure is very strong!--JOE |
| Question: | I don't see any gpm. does any one know |
| Answer: | roughly 45 GPM HERE'S PER HOUR GPH @ 0 feet: 2680 GPH GPH @ 5 feet: 2680 GPHGPH @ 10 feet 2040 GPH @ 15 feet: 1140 GPH HOPE THIS HELPS YOUGPH @ 20 feet: Off |
| Question: | is the waranty valid when you by thru amazon , some reviews indicate that it is not |
| Answer: | If it's brand new, and is delivered to you in the original box, which every one I've bought from Amazon is and you can produce a sales receipt, which you can from your Amazon account, why would it not be? There is a metal plate attached to the top every one of these pumps that has the date of manufacture stamped on it. As long as your receipt date reasonably coincides with the date stamp on the pump, Zoeller will honor the warranty. |
Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer
Watts Premier
Product description
The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water and saving up to 15,000 gallons per year. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. Please note this will not work with a tankless water heater.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
- Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines
- Voltage: 120 volts, Item Weight: 8.5 pounds. Overall Dimension: 6.2 x 6 x 5 inches
- Provides hot water at every faucet or shower when needed and helps eliminate wasted water
- Easily installs to existing plumbing and is maintenance-free
- 24-hour programmable timer activates pump when you need it
User questions & answers
| Question: | How many amps is the pump |
| Answer: | The pump runs at .22 Amps, and recommended supply current of 2.5 Amps. A standard 15 Amp wall socket is all that you need to plug it into. The .22 Amps the pump indicates maximum start up current, actual running current will be somewhat lower. Inrush current is always higher, when the motor has to start up, actual running current will be lower, example a 1 HP motor will have an inrush current of about 34 Amps, just until the motor reaching normal operating speed then it drops down to around 7.5 Amps, quite a bit lower, but the breaker needs to be able to handle the inrush currents. |
| Question: | can i used without the sensor valve |
| Answer: | Yes.As long as you have a return line running back to your water heater. You do not need a separate return line at every faucet. You need one return line. Follow your hot water pipe to the end (last branch takeoff), cut in a tee and run pex or copper. At the bottom of your tank style water heater there is a small, usually plastic valve. Remove that valve and screw in a 3/4" brass or stainless pipe nipple. Then install a tee inline with side outlet looking up and in the end of the tee put a brass drain valve to replace the crappy plastic one if applicable. The side connection on the tee you installed is where you will connect your return line you just ran. I did not notice if this pump had a built in check valve but if not you may want one to prevent water from flowing through both the hot water main and the hot water return to the faucet nearest the end. Water will follow the path of least resistance so the last branch on the main usually ends up being similar in distance to the water heater from either line. As a result water can back feed up the return line and will bring the cold water entering the tank with it. This is especially true when a second source of hot water is being used at the same time hence the need for a check valve. |
| Question: | If the pump is on, and the water is hot, the sensor valve closes, right? Isn't the pump trying to push water against a totally closed line |
| Answer: | This type of pump is designed to operate with zero flow, and it actually uses a little less electricity when it is not moving water. When the sensor valve closes, the pump does not move any water. When the sensor valve reopens, the pump moves water from the hot water line into the cold water line. |
| Question: | So what this does is move the hot water through the pipes constantly, not just when you need it? Seems like an energy suck. Is it |
| Answer: | If you run this all the time you will likely increase your water heating costs significantly as you are turning your pipes into a big radiant heater. You can use the built in timer to only have it come on at set periods, but this will only work if you have a very fixed schedule. I attacked this another way. I plugged the unit into a TP-Link HS110 Smart plug that is Alexa controlled. I can just say turn on hot water pump or turn off hot water pump when I want to control it. But that was not good enough for me. I found that if this pump ran for four minutes it would give me hot water at the distant shower that I wanted, so I did the following. I wrote a routine to turn on the pump, wait four minutes and then turn it off. While I can run this by voice, I bought the new Amazon Alexa Button, they are about $14 for a two pack. The button is battery operated and communicates to another Alexa device. Just before I take a shower I push the button and within four minutes the water will be hot without having to run water. |
Product features
Includes Everything Needed
Pump with timer and 10 ft. electric cord, two adapters with rubber washers, valve mounting screws, sensor valve, two 12 in. supply lines
Easy Installation
Easy to install, usually less than one hour.
Save Money
Save money, up to 10% of your water bill annually.
Latest Reviews
View all
Disaster Kit
- Updated: 03.03.2023
- Read reviews
New Bedspreads
- Updated: 12.07.2023
- Read reviews
Rca Cable For Turntable
- Updated: 24.02.2023
- Read reviews
Pure Psoriasis Treatments
- Updated: 04.05.2023
- Read reviews
Notebook For Men College
- Updated: 23.07.2023
- Read reviews