11 best domestic water pump

Product description

Specifications:

1.Rated Power: 245W

2.Max Head: 39.4ft(12m)

3.Max Flow: 948GPH (60L/min)

4.Max Pressure:1.28 Bar

5.Current: 1.90 A

6.Volt/Freq:110-120V/60Hz

7.Size of body pipe: NPT 1 inch

8.Size of brass union：NPT 1inch to NPT 3/4 inch

9.Size of flow switch: NPT 1inch TO NPT 3/4 inch



Description:

The boost pump is much more powerful and quiet than before.It absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure.When the tap water is of low pressure, It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipment, and increase oxygen for rearing ponds and fish tanks.



Application & Characteristics:

1.We suggest using this pump in running water system. In running water system, after opening the faucet, the pump will start automatically; after closing the faucet, the pump will start automatically. If the water can not run by itself, the pump can not be start automatically.

2.Most of the reasons cause the pump does not automatically runs or shut down is the damaged water flow switch.we’ll provide a new replacement under the warranty.

3.In order to guarantee the service life of the product, we recommend that the use time should not exceed 40 minutes for one time.(It will be a little hot running for a long time,Please don't worry.)



4.The top floor of the apartment has problems of low water pressure, low water flux and failure to retrofire the gas heater, which is caused by the low height of water tank.Our water booster can solve these problems.

5.The pump can be used as a circulator for some industry equipment, such as argon arc welding machine, laser apparatus, injection molding machine, foodstuff machinery, medical treatment equipment and so on, and also can supply water for small boilers.

• Max Power: 245w;Max Flow Rate: 948GPH(60L/min);Inlet/Outlet: NPT 1 inch;Max Pressure: 1.28BAR (18.56 PSI);
• Silence Working and energy-saving. High efficiency and low power consumption.
• Easy installation, only need a wrench to connect the pump, saving you the cost of plumbers.
• Powerful 245W Motor, High Quality NPT 1” to 3/4” Water flow switch and full brass fittings included.
• We provide 6 months free return and 6 months fittings parts replacement for all our boost pump.If you have any problems for using our products,feel free to contact with us at the first time,we’ll made you satisfied with your purchase.

User questions & answers

Question:	can I install this underground
Answer:	The size chart is very accurate. Measure your waist and go with their recommendation.
Question:	Can thus pump be used to up the pressure for an irrigation system
Answer:	About 80% of the way to the knee I'm 5 10 so maybe a little bit shorter ton you
Question:	Esta bomba es automatica
Answer:	If you are an Amazon Prime member, you might qualify for a free return under certain conditions. Contact Amazon and the seller to see if returns or free returns apply. Otherwise, I would give/sell them to a friend who might can use them and purchase the correct size.
Question:	port fitting are not 3/4 garden as stated. trouble with leaking any tips out there
Answer:	They are long. I am 6’ / 190 pounds and slim hipped. They run really small. First order I received was WAY too small. Had to get XXL. They are well made. Decent for the price. A longer short than 6”.

Product features

Wide Application

• This pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments, and increase oxygen for rearing ponds and fish tanks.
• GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it compeletely solves the problem that the higher floors do not have water while the lower floors have.

Easy to Installation

• Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
• Simple operation and save power.
• Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure.

Advantage

1. Double-faced impeller
2. Double ball bearing
3. Stainless steel rotor
4. Copper Coil

• The coil uses 100% copper wire to ensure efficient and stable operation of the motor
• Suspension Motor Technology
• Can effectively solve the high temperature and noise generated by the high-speed operation of the motor.

Specification

Type: W15GR-10

Max/Rated Head: 15m(49.2FT)/ 8m(26.2FT)

Max/Rated Flow: 20L/min(316.8GPH) /10L/min(158.4GPH)

Insulation: B

Current: 0.42A

Capacitance:3uf

Volt/Freq: 110-120V/60Hz

Connection size on pump body:G 3/4''

Size of union and flow switch: G 3/4'' * NPT 1/2''

Product description

Specifications:

Rated Power:93/67/46W

Inlet/Outlet:3/4 inch

Max Flow:36/29/20 L/min(9.5/7.66/5.28GPM)

Rated Head:20/16/13m(65.6/52.5/42.6FT)

Volt/Freq:110-120V/60Hz



Application:

Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.



Advantages:

No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.



Features:

High temperature resistance, antifraying,long life, maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.



Performance Datas:

1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.

2).Performance: Liquid temperature range 0 - 212℉(0-100℃);Maximum working pressure 10bar(145PSI).

3).Ambient temperature: not higher than 104℉(40℃)

4).Voltage:110-120V,Frequency: 60Hz.

5).Motor: Protection class IP44 Insulation class F.

6).Material: Cast Iron, PP, ceramics.

7).Mounting position: Shaft horizontal mounting.

8).Pump settings: Single-phase pipeline pump 3-Speed manually controlled single-phase motor is not overloaded casting pump length 130 mm(5.12 Inch).

• 1. Rated Power:93/67/46W;Inlet/Outlet:3/4 inch;Max Flow:36/29/20 L/min(9.5/7.66/5.28GPM); Rated Head:20/16/13m(65.6/52.5/42.6FT)
• 2.Max Working Pressure 10bar(145PSI).Power Cord: 4.1ft. Liquid temperature range: 0℉ - 212℉
• 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
• 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
• 5.Materials: Pump body: Cast Iron; Impeller: Corrosion-resistant, Composite, PES; Shaft: Ceramic;Bearing: Ceramic.

User questions & answers

Question:	Can I use this pump for hot water?what's the liquid temperature range
Answer:	YES,this circulation pump can be used for hot water.and the temperature must below 212℉。
Question:	Conflicting info in product description. ..."Can be used directly in drinking water pipelines", or "Not suitable for potable water". Which is it
Answer:	It can be used directly in drinking water pipelines.
Question:	Is this pump powerful enough for home use
Answer:	Yes,this hot water circulation pump is very powerful.
Question:	What is the highest temperature it can be used at
Answer:	Below the 212℉.

Product description

G&W 150W 110V Recirculating Booster Pump Domestic Hot Water cast iron with 3/4" to 1/2" adapters 35ft Head 7GPM Used for city buildings, Great for Solar Heaters, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on. This unit has a 3 position switch, position auto will turn on the pump when the flow sensor senses flow, so when you open a faucet or an appliance is used, the pump will automatically turn on to increase water pressure. Manual position will keep the pump running or if you want to control the pump with another device as a temperature control then you can use the manual switch position and control the pump with your device. the other switch position just will turn off the pump. This unit can also be used as a circulating pump for centralized hot water systems where you need to circulate hot water to have instant hot water at the point of use.

• G&W 150W 110V Recirculating Booster Pump Domestic Hot Water cast iron with 3/4" to 1/2" adapters 35ft Head 7GPM

User questions & answers

Question:	Does this pump require a check valve kit to be installed at the sink furthest away from the system
Answer:	No, it doesn't need
Question:	How many psi does this put out
Answer:	12 psi

Product description

T-king Stainless Steel Home Manual Water Pump --Domestic Oil Pump Well Hand Shake Suction Pump Thickness 1.3MM Lift 10M

Feature:

1.Product Name: Extension thickening manual pump

2.Pump Body lengthen ,suction is bigger, the water faster

3.Pump wall thickening, durable

4.Humanized design ,no water plugging

5.Polished edge, Finishing burr

6.Lightly shake the water, large water output, durable

7.Lengthened pump body can effectively reduce water overflow from the top

8.Lengthen core, save labour

Specification:

1.Interface size: 32mm outer diameter water pipe

2.Material: SU202 stainless steel

3.Pump body thickness: 1.3MM

4.Pump height: 25.5CM

5.Pump bottom diameter: 8.9CM

6.Outlet length: 5.7CM

7.Water depth: 10 meters of groundwater

8.Handle: all solid stainless steel

9.Weight: about 2KG

Package including:

1 x Stainless Steel Home Manual Water Pump

1 X Leather bowl

1 X Waterproof leather pad

1 X Conversion head

3 X Set screw

1 X Raw meal

1 X pvc direct

Note:

For the first use, a small amount of water needs to be injected to keep the seal ring sealed; Because the water pump has a water stop valve inside, when the water pump is not in use, the water in the water pipe is sucked back, which will close the water stop valve in the pump , No need to fill water when using again

• Product Name: Extension Thickening Manual Water Pump
• Pump Body lengthen ,suction is bigger, the water faster;Lengthened pump body can effectively reduce water overflow from the top
• Pump wall thickening, durable
• Humanized design ,no water plugging
• Lightly shake the water, large water output, durable

User questions & answers

Question:	How deep of a well will this work with
Answer:	YES,you should flow the arrow.
Question:	Where are these pumps made
Answer:	yes,it can pass water without power.
Question:	What type of pipe or tubing needs to attach to the bottom that draws the water
Answer:	The material of pump head is different, the material of RS15-9SB is stainless steel 304, the material of rs15-9r is cast iron.
Question:	dos this pump ned priming
Answer:	We have a little confused about your said, could you explain what function do you want to acheive? We will recommend the suitable type for you when we receive your reply.
Question:	should the water flow necessarily follow the direction of the arrow
Answer:	The pump motor itself is not sealed and has a cooling fan at the rear. You will need to provide circulatation . There are pumps that are sealed and even some that will use the liquid as a coolant. I’ve created a small enclosure with a semi open bottom that is above ground that allows air flow while protecting the pump from the elements. Hope this helps.
Question:	Does the pump pass water if there is no power
Answer:	Hello, our pump is generally only suitable for home pressurization. How much pressure do you need? If the pressure demand is relatively large, our pump may not meet your needs.
Question:	What is the difference between this proudct, rs15-9 sb, and bokywox rs15/9r? i see a bit of diff on control flow part
Answer:	Esta bomba es un impulsor de agua, es decir cuando se abre cualquier llave de la casa esta tiene un sensor de presión que detecta flujo de corriente de agua y hace que la bomba arranque en ese momento, despues se detiene cuando cierras las llaves
Question:	Does anyone know why the recirculating pump works better after initial use on a twin tankless water heaters? house has 5 bathrooms 6 sink 1 kitchen
Answer:	We have listed detailed description on feature, the Connection size: G 3/4" on pump ports, G 1/2" on unions, suitable to 1/2" pipe.

Product features

KEEP QUIET TO WORK

Super silent, aesthetics, easy to install and operate.The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.

Wide Application

Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.

Easy installation

Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers

Specification

Rated Power: 120W

Inlet/Outlet: NPT 3/4''

Flow: 30LPM(8GPM)

Max Head: 11M(36FT)

Voltage: 110-120V

Frequency: 60Hz

Pressure: 1Bar(14.5PSI)

Length of cable: 1.25m(4.1FT)

Product description

【Parameter】

Max Head: 25m

Max Flow: 33L/min

Max Pressure:2.76 Bar

Current: 2.8 A

Volt/Freq: 24v

Size of body pipe: NPT 1 inch

Size of brass union：NPT 1/2 inch



【Why choose us】

-Silence Working and energy-saving. High efficiency and low power consumption,Provide a more quiet and comfortable environment for you family members.

-Simple installation.It can save you time and money.

-24V DC voltage power.It will not cause harm to the human body.

-It can be used in a variety of scenes such as gardens, bathrooms, kitchens, etc.

-Provide 30-day return and exchange service.



【Package listing】

1*Booster pump body

1*Water flow switch

1*All brass union

1*white tap: 0.3 m

1 * User Manual

• 【50dB Volume】The volume is less than 50 decibels when it work，which is not higher than the sound of normal conversation.Silence Working and energy-saving. High efficiency and low power consumption,Provide a more quiet and comfortable environment for you family members
• 【24V DC Safety voltage 】Using 24V DC voltage power supply, even if it leaks, it will not cause harm to the human body. You can use it at home with confidence
• 【Easy installation】Just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.Tip: Please pay attention to tighten the screws at the interface to avoid water leakage
• 【Wide Usage】100W water pressure can lift water up to 75 vertical feet. The diaphragm pump retains the low power and pressure settings of the original series, and can be used in environments that do not require large flow,such as kitchen and garden faucet; showers head, water heater and toilet pressurization; and can also increase the spraying effect of fertilizing and spraying tools
• 【Our service】Our products support 30 days for no reason to return or replace. If you have any question, please contact our seller support, we will do our best to help you

User questions & answers

Question:	Is there an installation manual for the booster pump
Answer:	Hello ,Thanks for your question For the first use, a small amount of water needs to be injected to keep the seal ring sealed; Because the water pump has a water stop valve inside, when the water pump is not in use, the water in the water pipe is sucked back, which will close the water stop valve in the pump , No need to fill water when using again

User questions & answers

Question:	Hi just bought this seems to work good at pressure but set to auto the pump does not turn off when the tap is off. What am I doing wrong
Answer:	Yes, there are detailed instructions, so you can install it easily.
Question:	Does this pump only work with SolarSystem
Answer:	It is recommend to use it within 8m from the water level to the pump.
Question:	What is exactly automatic? Once started, does this automatically stop if it detects hot water on inlet side
Answer:	Made in China, currently shipped from Amazon warehouse.
Question:	Can this pump be used for hot water
Answer:	Hello Thanks for your question. The Interface size :32mm outer diameter water pipe. Generally, the material can be PVC or PP hard water pipe.

Product features

KEEP QUIET TO WORK

Super silent, aesthetics, easy to install and operate.The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness.

No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.

Wide Application

Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.

Easy installation

Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers

Specification

Model：RS15-9G

Rated Power: 120W

Inlet/Outlet Diameter: NPT 3/4''

Max Flow: 30L/min(8GPM)

Max Head: 9m(29.5FT)

Volt/Freq: 110-120V/60Hz

Pressure:1bar(14.5PSI)

Length of cable: 1.25m(4.1FT)

• 【Well Pump】TBVECHI Stainless Steel Manual Water Jet Pump Domestic Well Hand Shake Suction Pump Groundwater for Home Garden Yard.
• 【Durable Water Suction Pump 】Lightly shake the water, large water output, durable. Lengthen core, save labour. Manual water pump Ensure the efficiency, as long as the hands shake up and down after installation, the water will be ejected quickly.
• 【Well Pump Material】Use SU202 stainless steel. Lengthened pump body can effectively reduce water overflow from the top. Humanized design, no water plugging.
• 【Useful】Well pump is easy to install and unload, so that you can assemble or dismantle them anytime and anywhere, so that you can be very smooth in work or pumping. Water depth 10 meters of groundwater.
• 【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee.

User questions & answers

Question:	what if the gaskets need replacing later on
Answer:	It takes time for the water to be circulated and get hot. If the pump runs, the bypass valve has not closed and it will run for a while. Once the water temp gets to the hot valve, the pump will build up pressure and the pump will turn off
Question:	Will this work for a 25ft deep well
Answer:	No, this pump work perfect with 110v residential power too.
Question:	Give me a break...some people only know inches. Yet you put package size in inches. What are the pump's dimensions in inches
Answer:	The pump can auto start when you open the faucet, the pump can auto close when you close the faucet.
Question:	are repair parts available in the US
Answer:	YES,you can.

Product description

Specifications:

1.Max Head: 15m

2.Max Flow: 25L/min

3.Max Pressure: 1.28 Bar

4.Current: 2.8 A

5.Volt/Freq: 24v

6.Size of body pipe: NPT 1 inch

7.Size of brass union: NPT 1/2 inch

Package included:

1).1*Booster pump body

2).1*Water flow switch

3).1*All brass union

4).1*white tap: 0.3 m

5).1*User Manual

• ✦【AUTOMATIC FLOW SWITCH】Our hydraulic pump is self-priming, with a maximum vertical height of 45 feet, and can be used even if it is located above the water tank. The automatic sensor switch is controlled by the water flow. It opens automatically when the faucet is turned on, and turns off when the faucet is closed.
• ✦【EASY TO INSTALLATION】The booster pump is energy-saving and environmentally friendly, and there is no noise when working. It has the advantages of high efficiency and low energy consumption, and provides a quieter and more comfortable environment for your family members. It is easy to install and only requires a wrench to link the pump, saving you the cost of a plumber.
• ✦【SAFETY PRRFORMANCE】This booster pump has a built-in adjustable switch that turns on/off at 45 PSI. We ensure that the replaced pump meets global quality and safety standards. It uses 24V DC voltage power supply, even if it leaks, it will not cause harm to the human body.
• ✦【LOW ENERGY CONSUMPTION】DC 24V water pressure lift up 45 feet. Diaphragm pumps retain the low power and low pressure settings of the original series, and can also be used in environments that do not require large flow, thereby improving the efficiency and flow of all water filtration systems, especially in low water pressure applications.
• ✦【WIDELY USED】Booster pumps are widely used, such as kitchen and garden faucets; shower nozzles, water heaters and toilets; they can also be connected with tools for spraying pesticides, fertilizers, and insect sprays to improve the spraying effect.

User questions & answers

Question:	Can this pump be used for hot water
Answer:	Maybe... Mine is mounted with adapter fittings on a 2inch npt 32 foot deep sand point well. The static water level in the well is 20 feet down from the pump. I always have to prime the pump, (pour in a half quart of warm water and pump the handle) untill that water is almost all lost and do it all again, before I actually get well water. If I stop pumping for more than a minute or so I'll start to lose prime(get some air back in the top of the pipe as the water slowly drops back into the well) There is a chance I have a leaky connection somewhere but it seams like this is fairly normal for my depth.
Question:	Is the pump silent when it is working
Answer:	Also for future reference, you can find mm to inches, or meters to feet, or kilograms to pounds, or any of a thousand other conversions by googling "mm to inches" (or whatever conversion you want) and you will instantly find a calculator where you can just type in whatever amount you want and have it converted. Oh, the miracles of modern technology!
Question:	Is this pump self priming
Answer:	We couldn’t get it to work. I ordered an extra one for parts.

Product description

Description

Model:RS15-6

Power: 93/67/46w

Inlet/Outlet Diameter: NPT 3/4''

Flow: 36/29/20LPM(9.5/7.66/5.28GPM)

Head: 20/16/13FT

Voltage: 120V

Frequency: 60Hz

Length of cable: 1m(3.2FT)

Degree of protection: IP42

Package size: 26*24*21（cm）

Gross weight: 3.8 kg (6.18lbs)



Suitable for medium: Hot water and ethanol maximum ratio of 1:1

1). Performance: Liquid temperature range 0- 100℃(0-212℉), Maximum working pressure 10bar(145PSI)

2). Ambient temperature: Not higher than 40℃(104℉);

3). Motor: Protection class IP42 Insulation class F

4). Material: cast iron, PP, ceramics

5). Mounting position: Shaft horizontal mounting



Welcome ! Dear customer

We have a Professional Customer Service Team to Reply You within 24 hours.If you have any Questions, Please feel free to Contact us.You Deserve the Best After-sales Service.

• 【Parameter】 Model:RS15-6; Power: 93/67/46w; Inlet/Outlet Diameter: NPT 3/4''; Flow: 36/29/20LPM(9.5/7.66/5.28GPM); Head: 20/16/13FT; 120V 60Hz; Length of cable: 1m(3.2FT); Degree of protection: IP42; Gross weight: 3.8 kg (6.18lbs).
• 【Advantage】 No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
• 【Premium Material】 Material: cast iron, PP, ceramics. Motor: Protection class IP42 Insulation class F.
• 【High Performance】 Performance: Liquid temperature range 0- 100℃(0-212℉), Maximum working pressure 10bar(145PSI). Ambient temperature: Not higher than 40℃(104℉).
• 【Wide Application】 Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment. Suitable for medium: Hot water and ethanol maximum ratio of 1:1.

• 1. Rated Power:93/67/46W Inlet/Outlet:3/4"NPT Voltage/Frequency: 110V/60HZ
• 2. Super silent, environmental protection, aesthetics, ease of installation.
• 3. Built-in high sensitive electronic sensors with three-speed control.
• 4. Material for Pump housing:STAINLESS STEEL;Impeller: Corrosion-resistant, Composite, PES ;Shaft: Ceramic;Bearing: Carbon axial
• 5.High temperature resistance, anti-fraying ,high efficiency, high flow,leak-tightness, low consumption

User questions & answers

Question:	Can you pump -40° Glycol with this pump? Or any pump you offer
Answer:	Yes, it can circulate hot and cold water and boost pressure for shower.
Question:	What are the dimensions of the pump itself? It only lists package dimensions
Answer:	Yes, there is no noise when it works.
Question:	What is the gpm or gph rating for this pump
Answer:	Yes,Our pump is self-priming and can be used even if it is located above the water tank. The automatic sensor switch is controlled by water flow.
Question:	Wiring question. black wire to power? brown wire is ground? blue wire is common/nuetral
Answer:	Mine came with a spare gasket cup, I figure for the price if ever wear out both; I'll buy another unit or upgrade to a simmons.