13 best rheem electric space heaters

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Digital temperature control allows you to set your temperature in increments of 1°

• External digital thermostatic control with LED display (+/1 degree accuracy)
• Most advanced self-modulation, adjust power to meet hot water demand
• Durable Copper immersion two heating elements, field Serviceable. Flow Rate- up to 4.4 GPM
• Simple installation – bottom 3/4 inch NPT water connections
• Threaded for easy replacement, simple installation, digital temperature display

User questions & answers

Question:	Can this be used in a recirculating system
Answer:	No where on the box does it say contains copper. Box reads.... 100% nonstick surface - hand washable and dishwasher safe- PFOAF Free, PTFE- fiberglass coating, safe up to 500 degrees, FDA approved. We are happy with our purchase.
Question:	How many amps
Answer:	Of course it can.
Question:	how many breakers and what amp
Answer:	No
Question:	will this supply two showers, washer and dishwasher for two people? (1000 sf house
Answer:	Made in China

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This water heater offers quick, continuous hot water that is on demand for single point-of-use or multiple applications.Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation and digital temperature display.

• Push-button ON/OFF control with LED temperature display
• 6 kW Model Flow Rate: up to 1.0 GPM
• Perfect for 1 or 2 sinks
• Bottom 1/2" NPT water connections
• On demand, consistent and continuous hot water

User questions & answers

Question:	The push on/off bottom. Not turn on the unit
Answer:	No it turns on when it needs to heat the water
Question:	What is the gallons per minute on this unit
Answer:	1 gallon per min max, 0.5 gallons per min optimum.
Question:	Does it have a thermostat to limit output temperature
Answer:	Hello- The Rheem RTEX-04 and RTEX-06 are not thermostatic, so it only displays the temperature of output. Thanks Ben
Question:	Will this work with a double 30 amp breaker and number 10 wire because that's what I have there now thank you
Answer:	yes

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The Rheem Brand Electric Heat Kits are made for Rheem and Ruud air handlers. They have built-in over-current protection and nickel chromium heat elements.



Standard Features:

Sequencers for better temperature control

Multiple branch circuit capability

Completely assembled and tested

Control circuit arranged to readily permit staging

Factory installed disconnect available on specific models (see electrical data)

Fuse link secondary high-temperature limit control

Plug-in wiring harness for ease on installation into air handler

Rust resistant nickel chromium heat elements

ETL listed

Picture is for illustration purpose only; Actual product may vary by Kilowatt

Check air handler or package unit specifications for heat kit compatibility This listing is for the product only. Installation is not included.

• 10KW Heater Kit , 208-230/1/60 with Pullout Disconnect
• Supersedes / Replaces: RXBH RXBH01724 RXBH1724 RXBH-1724C10J RXBH1724C10J 662766438758 TUBH-1724C10J TUBH1724C10J TUBH1724 and others
• Commonly found in: Various Rheem & Ruud Systems EH1T2417 EH1T3617ST RH1P18/2417ST RH1P30/3617ST RH1T2417SP/ST RH1T3617SP/ST RH1T3617SE RH1V2417ST RH1V3617ST RHML2421JA
• Note : Images are for illustration only. Actual part could vary.

User questions & answers

Question:	Will this fit my RUUD MODEL RHSL-HM3017JA ? And do I need anything else to fit it into the handler
Answer:	Dear Valued Customer,RXBH1724C10J does fit RHSL air handlers and will fit RHSLHM3017JA. You won't need anything else to fit it into the unit.Should you need further assistance placing your order please call our sales team during normal business hours (Monday - Friday , 9 am - 6 pm EST) at 888-474-9966.Sincerely,The AC Outlet Team

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Eco Smart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why Eco Smart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self-modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home.Take a look at our full line of tankless water heaters below to see what's perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!. Required Wire: 4 x 8 AWG

From the Manufacturer

Ecosmart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why EcoSmart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home. Take a look at our full line of tankless water heaters below to see whats perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• Pipe Fittings:3/4 inch NPT
• Required Breaker:4 x 40 A
• 150 A

User questions & answers

Question:	What model is recommended for whole house
Answer:
Question:	I live in lower michigan and what model is recommended for whole house
Answer:
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation.

From the Manufacturer

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation

• Set the knob on the front cover and enjoy water temperatures between 86DegreeF (30DegreeC) and 125DegreeF (52DegreeC)
• The three years parts warranty is unique in the industry
• Due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications

User questions & answers

Question:	The Item Weight is 50 pounds
Answer:	Out of box, no stamping, thus don’t know
Question:	The description says this unit is swicthable between7.2 kw and 9.6kw, can it be set at 8kw? much obliged
Answer:	Yes it does. About 4 feet with connectors and Teflon tape.
Question:	Is 6# gauge wire thick enough for 9.6KW setting
Answer:	Hello Tulsa, Thanks for reaching out. Please be noted the max. working pressure for this reel is 300psi.
Question:	does the dhc-6 unit self drain/how do you drain for the winter
Answer:	Instructions say not to open casing but it can be opened

Product features

Simple, Reliable Hot Water Right at the Sink: DHC

DHC can deliver warm or hot water to a single point-of-use, usually a hand wash or utility sink. Please view the Sizing Guide images above in the image detail view for more information.

The heating element is controlled by a flow switch which means a DHC can never dry-fire and fail prematurely. And since all DHCs are hydraulically controlled, operation is quiet. DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The simplicity and reliability of the Stiebel Eltron DHC tankless water heaters make them ideal point-of-use water heaters for these residential applications:

• Bathroom Sinks
• Kitchen Sinks
• Utility Sinks
• Laundry Areas
• Boats / RVs

And they are ideal for restrooms or kitchenettes in these office or commercial / industrial settings:

• Office Buildings
• Gas Stations
• Stores
• Schools
• Malls
• Hotels / Motels
• Warehouses
• Commercial Condominiums
• Restaurants
• Manufacturing Facilities

Electronic Accuracy: DHC-E

DHC-E can deliver hot water to a single sink, multiple sinks, or in certain conditions, low-flow showerheads. Please view the Sizing Guide images above in the image detail view for more information.

Control temperature simply by setting a dial

Set the temperature knob on the front cover, and enjoy water between 86–140 °F (30–60 °C). Change the desired temperature at any time. Advanced microprocessor technology ensures that the water temperature doesn't deviate from the set point even if flow varies.

Sleek Design & Constant Temperature Output

DHC-E models have our exclusive Electronic Temperature Control. Stiebel Eltron Electronic Temperature Control compensates for fluctuations in the flow rate and the incoming water temperature to maintain a constant water temperature output. Our smart microprocessor technology continually monitors info from the flow sensor & two temperature sensors & micro-adjusts the heating elements, saving power.

Product description

V65eP is the perfect combination of high efficiency, comfort and value in a propane gas tankless water heater from Rinnai. Ideal for small to medium homes or remodels, compact, easy-to-install, reliable and perfect for outdoor locations; Rinnai products provide peace of mind with warranties that surpass the competition.

From the Manufacturer

Rinnai's V65E exterior-mount tankless water heater efficiently delivers up to 6.6-Gallon per minute (GPM) of hot water, making it perfect for your one to two and half bathroom home. This easy-to-install, ultra-compact unit lets you enjoy all the benefits of Rinnai tankless water heating. You'll experience clean, reliable hot water at a consistent pre-set temperature, while saving energy and precious floor space in your home.

• Endless hot water for your entire home
• V65eP HE High Efficiency Tankless Hot Water Heater - Propane: Outdoor Installation Only
• Up to 6.5 GPM hot water flow rate (varies by groundwater temp)
• Control-R 2.0 mobile app features timers and schedules throughout the day and allows you to remotely put the system into vacation mode.
• Residential Factory Warranty - 120 months (heat exchanger), 12 months (labor), 60 months (parts)

User questions & answers

Question:	Can the temperature output be adjusted to 105F
Answer:	Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off
Question:	Can I use the Rinnai V65EP in Denver, Co? Temperatures during the winter can get below zero
Answer:	It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case
Question:	Does this unit come with controller? rinnai tech said i needed a mc-91-2us controller? do i need to buy separate
Answer:	I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit.
Question:	What does the "Low NOx Mean
Answer:	Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June

Product features

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.

• Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
• Safe electronic ignition system; plugs into standard 120v electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate

User questions & answers

Question:	service number
Answer:	785-477-8702
Question:	How much current does it draw
Answer:	Hello Donna. Thank you for your question. This unit uses 120v, 60Hz and draws 2 amps.If we've helped you, please prefer us when you purchase on Amazon. Kind Regards,RossGadgetsGo
Question:	can i vent this thru a masonry chimney
Answer:	It needs to be ported outside.
Question:	What is the highest temperature achievable from this water heater? Will it produce temperatures in excess of 150 degrees F
Answer:	Assuming you have everything hooked up correctly, at 3.5 GPM, the MAX TEMP will be NO MORE THAN 55 degrees ABOVE THE TEMPERATURE OF THE INCOMING WATER. For example, if the incoming water temp is 50 degrees in the winter, then the max winter temp will be 105. In the summer, when the incoming water is 65 degrees, the max summer temp will be 120 degrees. This is the way ALL demand heaters work. Be SURE to check the TEMPERATURE RISE specification on ANY demand heater to know what it is truly capable of. If the TEMP RISE is specified at 3GPM, and you try to set it higher, it may CUT BACK THE FLOW RATE to achieve the higher temp, but it will NEVER exceed the TEMP RISE spec.

Product features

FVI12 Indoor Liquid Propane Tankless Water Heater

• Whole home indoor, propane-powered tankless water heater, that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.

• Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.

Prefect for Cabins!

Perfect for Tiny Homes!

Perfect for Apartments!

Perfect for Businesses!

Is this the right water heater for you?

Product description

The T-H3-DV-N is well suited for residential/ commercial applications such as small restaurants and beauty salons. Complies with Ultra-Low NOx regulations. Utilizing commercial grade copper alloy for the heat exchanger tubing, the T-H3 is also suitable for heavier residential usages such as space heating or domestic recirculation systems. Certified up to 10,100 ft. altitude. With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

From the Manufacturer

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation
• Computerized safety features, No pilot light to have to worry about
• Safety features include freeze, overheat, surge protection, and troubleshooting diagnostic codes
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions
• Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel, Integrated controls and power cord as standard features

User questions & answers

Question:	My plumber is looking for the exhaust venting for this tankless hot water heater.. Pipe for exhaust, 90 degree iPod, gasget? Help
Answer:	The exhaust pipe in the manual is this one https://www.amazon.com/gp/product/B00ED10Y6C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Question:	Will this suffice for a 4 bathroom home in Dallas? Looking at temperature rise of ~45 degrees (110 desired minus 65 groundwater temperature
Answer:	It's 10 gal/min... if you have a shower that is NOT a water saver and uses 6 gal/min... someone is going to miss out, no problem on the 45 deg rise, but we find that 130 deg is more desirable and still no problem in Albuquerque where the water temp MAY go into the 30s but most likely not less than about 45... HTH
Question:	Where is it manufactured
Answer:	JAPAN by one of the best hot water heater manufacturers in the world. Few if any can compair with Takagi, IMHO! Best unit I have ever installed, bar-none!
Question:	what does "condensing" mean in this case
Answer:	I can't stop laughing after reading the answers + there are 11 people with less clue who found the "explanations" useful... Guys, please allow me to explain the process: The condensation units have a secondary heat exchanger which takes the exhaust from regular 80% efficiency and "works" the water again in order to heat it even more, while cooling down the exhaust. Doing so the exhaust will be cool and it will condensate. This condensed exhaust will run down the vent and is gathered in an internal tray from where it goes to the condensation drain. Under NO CIRCUMSTANCES is the condensed exhaust in contact with your hot (or cold) water. By re-using your exhaust (hot), the efficiency will show on paper an additional 15% -17% added to the standard 80% of a conventional water heater.

Product description

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External adjustable digital thermostatic control with LED display (+/1 degree accuracy
• Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
• Simple installation – 1/2 NPT adapters included; side 1/2 inch Compression water connections
• 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
• Threaded for easy replacement, simple installation, digital temperature display 54 A. 13kW Model Flow Rate: up to 3.17 GPM
• 54 A

User questions & answers

Question:	We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help
Answer:	Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F.
Question:	Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters
Answer:	No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city.
Question:	what are the wiring and power requirements
Answer:	good morning,60 amp breaker and , number 6 cable !thank you have a great day!
Question:	How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater
Answer:	Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben

Product features

About Us

Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.