15 best booster for water heaters

• 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
• 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
• 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
• 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
• 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.

User questions & answers

Question:	Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water
Answer:	Yes
Question:	What size tubing should you buy to fit the .74 inch adapter
Answer:	Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc?
Question:	Where exactly is the inlet? If used as a small sump pump, how much water will be left
Answer:	The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps.
Question:	Does it have / need oil or lubricant? Would keg lube work
Answer:	no need to lube. just plug and run it in water.

Product features

VIVOSUN 800GPH Water Pump

• This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
• Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.

3 oulet adapters

Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.

Water control valve

Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).

4 suction cups

The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.

Parameter details

Power: 24W; Voltage: 110-120V

Flow: 3000L/H; Power cord length: 5ft

Working environment temperature: 1-36 °C

Product description

Brass impeller. For agricultural use. Power: 1/2 HP Voltage: 120 V / 60 Hz Speed: 3,450 rpm Maximum height: 131 ft (40 m) Maximum depth: 26 ft (8 m) Inlet / outlet: 1 NPT Work cycle: 50 min. work x 20 min. rest Max work period: 6 hours daily

User questions & answers

Question:	I need to know which bob has more strength to extract the water
Answer:	HiThis is a pain relief that should be applied to affected area to relief pain. It cannot be used with any ultrasound device. We carry the multi purpose ultrasound gel, medium and low viscosity. It comes in 4 jugs, 5liter each. Great gel at a great price. You can check it on our website biotrading dot caThank youBio Trading sales
Question:	I need power cord for the pump
Answer:	We ship the same day we receive the order. The ad says sold and shipped by Amazon. We sell this item and ship to Canada and USA the same day we receive the order. We also have 3 sizes: 250 ml dispenser, 16 oz and one gallon. It's a great pain relief. Thank you Biotrading.ca 1877-234-8272
Question:	Will it withstand continuous duty pumping mineral oil at approx 110 deg farenheit? If no, any suggestions as to a pump that can
Answer:	Well, I gave the roll on to my cousin, who lives an hour from me. But I also ordered the tube and the 16 oz. pump of gel. The bottle of the gel says it is made in the USA, and also says, " Sub Zero is a Trademark of Current Solutions LLC with an address of: 3814 Woodbury Drive, Austin, Texas 78704. Phone: (800) 871-7858 Web Address of: www.currentsolutionsnow.com
Question:	Does this pump have a 110 plugin
Answer:	Hi Dan... they only give you a list they do not give the %'s of each except that there is 3.9% of Natural Menthol

Product description

With a 3-Year Residential and Commercial Guarantee, the Honda WB20XT 164 GPM 2" GX120 118cc General Purpose Centrifugal Water Pump is Protected By Honda Oil Alert Warning System and comes in a heavy-duty full frame for protecting the pump and engine on both sides. The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions. It has a 164 gal./min. capacity and centrifugal 2" pump.

• OHV COMMERCIAL ENGINE - The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
• 4 VANE HIGH EFFICIENCY IMPELLER - The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
• DURABLE - The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
• CAST IRON VOLUTE - The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

User questions & answers

Question:	How long will it run on one tankful
Answer:	It will run 2 1/2 to 3 hours on a tank full. I can't say enough good about this little pump. It starts on the first pull every time. It has totally saved our garden this year.
Question:	Q distancia se puede trasladar el agua
Answer:	Ochenta meters
Question:	Any good as a fire hose pump ? Has anyone used it for one ? Live in the forest, building a pond right now for the pump's water
Answer:	Yes, great pump and very powerful for its compact size. I pump water from a river, up a 75’ tall embankment. Get the adjustable fire hose nozzle, it can shoot a stream of water 30’. Great for fire protection
Question:	Horse power
Answer:	https://engines.honda.com/models/model-detail/mid-gx Try this link to the Honda website. It states 3.5 HP.

Product description

In some instances, the pump may need to be removed to change engine oil. 

Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. 

These bolts and spacers are not included, but may be purchased at your local hardware store.  

Common bolt sizes: Two - 5/16" 18 x 2 1/2" , One - 5/16" 18 x 3 1/2"

 

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 2800 psi PRESSURE WASHER WATER PUMP
• Fits 2800 psi
• 2500-2800 PSI / 2.3 GPM
• Fits 7/8" Shaft Vertical Crank Engines
• 22 MM x 14 MM Hose Connection

User questions & answers

Question:	Will this pump replace pump A07908 off a vr
Answer:	Maybe
Question:	Is there an user manual
Answer:	No, but installation is relatively intuitive.
Question:	Will this fit my honda blackmax power washer 2800psi
Answer:	it should its pretty much a universal pump the bolt pattern is correct its for a 7/8 crank which is correct this pump is clocked where the hoses come out the back if they need to come out the front we will need to rotate the pump for you before shipment most of the time people would rather have it come out the back anyways
Question:	I have a husky with a pump part number 308653006. Is this a direct replacement for that
Answer:	Hello! Thanks for the inquiry. Yes, this is a replacement for that part number. It's an aftermarket version so keep in mind that it won't look exactly the same, but it will work for you. Also, note that spacers / longer bolts may be required to mount the pump to the engine, depending on the configuration.LeahCustomer Service

Product description

Rheem RTEX-AB Water Heater Booster

• Item Weight: 8.5 lb
• Country of Origin: United States
• Brand name: Rheem
• Item Dimensions: 6.75"L x 10.3"W x 14.0"H

User questions & answers

Question:	If I buy a 40-gal electric water heater. Should I buy a regular or quick recovery to go with this booster
Answer:	Cord is attached but one thing the float does not float you must raise it higher in order for the pump to work
Question:	Could this be used with a hybrid hot water heater
Answer:	I used it with pvc fittings and pipe, but take it into your local hardware store. they will be able to sell you a fitting that will make it fit a standard garden hose, probably for under $5. Be sure to fit the pump with the male side connector. so you can string multiple hoses on it to get the length you need it. I pump my water about 100 yards with a 15 foot rise.
Question:	Does it have to be installed on the water heater or can it be installed else where? My kitchen sink takes forever to start receiving hot water
Answer:	Yes! I just rinse it in a 5 gal. bucket.
Question:	Can this be used on a recirculating loop (assuming the flow is kept under 0.3 gpm booster activation flow
Answer:	Pump starts running in less than 1/4 inch of water when you use the discharge port to prime it

Product description

The MegaBoost is designed to be installed with any domestic hot water tank, new or existing, gas or electric. It will provide more hot water for longer showers and shorten the tank’s recovery time. It achieves its boosting effect at 100% efficiency. MegaBoost installation is flexible as it is designed to be installed on either the tank’s cold water inlet or on the hot water outlet. A 30-gallon tank with MegaBoost installed on the hot water outlet will provide 54% more hot water than the tank will without MegaBoost. If MegaBoost is installed on the cold water inlet it will provide 71% more hot water. In addition, the recovery rate for the tank is also reduced, significantly reducing the wait time for the tank to recharge. MegaBoost may allow using a smaller tank than a larger one which will save space and save money by preventing the increased standby losses of a larger tank.

• More hot water for more Showers or longer Showers
• Saves space by making a small tank perform like a large tank
• Fast & accurate hot water temperature adjustment for convenience and comfort
• Increases existing tank capacity up to 70%
• 200% faster recovery time
• Saves money by preventing the increased standby losses of a larger tank replacement

User questions & answers

Question:	What are the electrical requirements
Answer:	Water heater
Question:	Does this tankless booster system limit the flow to reach the set temperature
Answer:	Yes
Question:	How exactly does this device get you more hot water
Answer:	hi ,the length is 28.35inch ,the diameter is 13.4inch
Question:	Can you install the megaboost with a natural gas tankless
Answer:	110v 15 amp breaker

Product description

The thermostatic mixing valve installed on top of new or existing water heaters to increase the available hot water in the water heater's tank, kill bacteria by increasing tank's temperature, while also preventing scalding by releasing water at a safe temperature. Transforming the plumbing industry through innovation. Cash Acme, a trusted history. An innovative future.

User questions & answers

Question:	Will this keep a constant output temperature (120) if my hot water heater varies from 120 to 140 to take advantage of time of use electric rates
Answer:	Any insulation is good for saving on your water heating bill. This is a relatively thin layer so it might be easier to install in a crawl space. Be extra careful not to rip the foil coating. It is thin and tears easily.
Question:	If I need a longer hose, can you just use any appliance hose with 3/4" fittings or is there something special about the hose proided
Answer:	Going by 3" thickness, the R value should be 10 - the same as the SP57 model.
Question:	What is the length of the flexible hose
Answer:	I cannot recall exactly how the one I ordered was packaged, and my hot water heater is right at 5’ and it covered it well. You will just need to open it (it could be folded) and if it is smaller than the stated dimensions, return it.
Question:	Will this help boost production on a tankless water heater
Answer:	The "blanket" is merely a thin section of insulation with mylar covering on one side. Cutting it is easy with scissors and will do no harm. The mylar is very thin and you must be careful not to puncture it. You may want to buy a roll of tape. The pieces that come with it don't go too far.

Product features

Tank Booster Pro - 3/4"

Tired of running out of hot water? Install the Cash Acme Tank Booster Pro on your existing water heater to double the amount of usable hot water from your plumbing system. The Tank Booster Pro is a cost effective solution for increasing usable hot water capacity. The tank booster mixing valve mixes both hot and cold water, which increases the tank's water capacity. Adding a Tank Booster allows water to be stored at a higher temperature, but safely delivered at 120°F (49°C) to all outlets.

Comfort

Increases the amount of usable hot water on existing water heaters. Remove suddenly cold showers from your daily routine with this easy add-on accessory.

Protection

Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.

Safety

Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ-removing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.

Product description

TankBuddy™ tankless electric water heater boosts tank water heaters by adding up to 45% delivery capacity to any tank. TankBuddy works with the tank to deliver more hot water. A 40-gallon tank combined with a TankBuddy delivers the hot water capacity of a 60-gallon tank. Install the unit directly on the tank outlet or on a nearby wall. No need for additional electrical infrastructure when used with an existing 30-amp electric water heater.

• Get more hot water from any size tank
• Increase deliverable hot water up to 45%
• If you currently have 10 gauge wiring & 30 AMP breaker there is no addition feed required
• Nearly double your shower time
• Compact design, fits on existing tank

User questions & answers

Question:	Who manufactures this unit
Answer:	Hello Jack. The manufacturer is Eemax. Feel free to ask us any other questions. GadgetsGo is an Authorized Eemax Distributor. Kind Regards, John M. GadgetsGo
Question:	Instructions call for #10 or
Answer:	they include a #10 extension (guessing about 3 feet) to go from tankbuddy to the water heater. #10 minimum to go to tankbuddy from the breaker to handle the amps. i think #8 would also fit the tankbuddy connectors, and therefore work. i had #10 already installed in my home, so that is what i used. the spec sheet says #10 copper.
Question:	Can the unit be installed on a heat pump hot water heater with out any problems
Answer:	this unit will boost the water temp if the input temp is high enough.
Question:	Can this be used as a temporary back up water heater good enough for one shower if the tank heater is broken, of course having proper plumbing
Answer:	I have not installed mi e yet but I would say no. It increases heat 45 degrees only. Therefore your water would only be tepid at best

Product description

The thermostatic mixing valve installed on top of new or existing water heaters to increase the available hot water in the water heater's tank, kill bacteria by increasing tank's temperature, while also preventing scalding by releasing water at a safe temperature. Transforming the plumbing industry through innovation. Cash Acme, a trusted history. An innovative future.

• COMFORT: Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters
• PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures
• SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140 degrees Fahrenheit (60 degrees C), while ensuring that water is delivered at a safe temperature to outlets
• COST EFFECTIVE: Adding a Tank Booster Pro Thermostatic Mixing Valve to an existing water heater allows water to be stored at a higher temperature
• SHARKBITE: Use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing

User questions & answers

Question:	Westinghouse offers stainless tank lifetime warranted WH now, which hose choice lasts longest corrugated vs braided? thanks
Answer:	Yes any extension cord with gage over 12 will work. Depending on the distance the gage of the wire will have to be bigger.
Question:	Will this regulate 180 degree water to safe tap temperature
Answer:	Dear consumer, we believe it won't withstand that type of duty. Best regards
Question:	is this 100% lead free
Answer:	if it's 110 send it to my country
Question:	Does either of these options have a higher output flow rating
Answer:	I think that very brief interruptions would seem to be ok but an extended interruption will likely damage the pump.
Question:	What size are the fittings
Answer:	The pump is tater for water temps up to 120 degrees.
Question:	Will it work on 220V
Answer:	Yes. I had to make an adaptor, so that I could connect a garden hose to it. Not a big deal. Also, had to tape the float switch to the side of the pump, when the water level drops too low.
Question:	Can flex pipe lines be used instead of copper hard pipe? talking about adding additional flex pipes, not cutting them. my wh is installed with flex li
Answer:	This pump is great to remove water from your cover however I do not recommend using this pump in temperatures below freezing as this will cause damage to the pump.
Question:	Does this come with 3/4" fittings
Answer:	Sorry have not used it yet.

Product features

Tank Booster Pro - 3/4"

Tired of running out of hot water? Install the Cash Acme Tank Booster Pro on your existing water heater to double the amount of usable hot water from your plumbing system. The Tank Booster Pro is a cost effective solution for increasing usable hot water capacity. The tank booster mixing valve mixes both hot and cold water, which increases the tank's water capacity. Adding a Tank Booster allows water to be stored at a higher temperature, but safely delivered at 120°F (49°C) to all outlets.

Comfort

Increases the amount of usable hot water on existing water heaters. Remove suddenly cold showers from your daily routine with this easy add-on accessory.

Protection

Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.

Safety

Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ-removing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.

Product description

Tank Max - water heater protects your family from scalding by allowing water to be 140 degrees (F) in the water heater while distributing 120 degree (F) water to fixtures. Lead-free and easy to install, tank Max saves money by extending the life of the hot water in your water heater. No solder or glue needed. Installation requires only a wrench and pipe thread sealing tape. Product specifications PDF below.

• Easy to install; Lead free; extend the life of the hot water in your water heater
• Saves time and money - no solder or glue needed
• Protects your family from scalding by allowing water to be 140 degrees (F) in the water heater while distributing 120 degree (F) water to Fixtures
• Tools needed for installation: wrench, pipe thread sealing tape
• 3/4" MNPT mixing outlet x 3/4" FNPT union fitting x 3/4" NPSH cold inlet
• ASSE 1017, NSF 61 & 372, IAMPO listed

User questions & answers

Question:	is this
Answer:	Hi Angela! Yes, this has a ¾” female hose with ¾” standard water heater connections.
Question:	How fast does water take to get hot? I usually have to wait for my shower to get hot. My bathroom on the other side of the house
Answer:	The time that the water takes to get hot is dependent upon how far it has to travel from water heater to shower. You may have a shower valve problem if it takes more time to reach the shower than the bathroom sink. To test this, first thing in the morning run only hot water to your sink and time it from the moment you turn on the hot water till it starts to warm up. The next day turn on your shower and position the handle to the normal spot and time it till it gets warm. If it takes 20% more time to get to the shower, change out your shower cartridge. The cold water is overpowering the hot water due to a weak cartridge.
Question:	Why cant i get a 5/8 inch female to female ends stating it on the picture it shows me instead of hose size
Answer:	These are straight threads and there are no standards to be followed. hose size fittings are standard.I would hard pipe t thing using lock tight. Or solder a copper piece of pipe .probably 1 inch l copper with bridgit.I have filled 3/8 gaps witj no issues.
Question:	Is the out put tempeture adjustable? What I want is slighly hotter water coming out the tap than
Answer:	120 degrees is about the max. The point of putting something like this in is to extend the hotwater for showers if you have a smaller tank. If you want hotter water for less duration. dont use this product just turn up your heater and add more cold via the tap.

Product description

FEATURES -



◆ Saves Energy and Money

The Thermoflow Elex 3.5L electric tankless water heater is adopt to advanced technology of Germany. Changing to this Elex 3.5L means there are no standby losses. No need to preheat before using, the hot water will come out from the heater instantly after you turn on the water heater, you only need to stop it immediately after using, no waste of water or electricity.

◆ Unlimited Hot Water

Instant hot water thanks to rapid and maintenance-free bare wire heating systems. Because a Thermoflow heats water only when it is used, and for as long as it is needed, there is an endless supply of hot water. Never run out of hot water.

◆ Space Saving

A Thermoflow Elex 3.5L tankless water heater completely replaces a conventional tank heater, yet takes up considerably less space, saving valuable living space and providing endless hot water on demand.

◆ Two Options for Applications

The Elex 3.5L model can be used for two different applications: Act as primary heater, just connect the inlet with cold water directly, and connect the outlet with mix tap; Act as booster heater, just connect the inlet with the outlet of storage tank, and connect the outlet with mix tap, faster heating, higher flow rate, saving your time.



USING TIPS -

• The device must be filled with water before connection to the electrical supply!
• Make sure the minimal pressure of your water supply system reaches 15 PSI.
• Please read the instruction manual carefully before you install or using the water heater!

PACKAGE INCLUDES -

1X Thermoflow Elex 3.5L electric tankless water heater

1X plastic bracket

1X bag of installation accessories (2 gaskets, 2 anchors, 2 screws)

1X instruction manual



Inquiry & aftersales service: [email protected]



Hotline:＋1（844）334-4203

• NOTE: Choose 3.5kw 120V if your power is 120V. 2 years warrant for free replacement and refund, contact us for any problem before your return. TANKLESS electric water heater - 0.5GPM at temp rise 45°F for single sink washing use of small water flow use, ideal for summer or warm weather. Water flow and inlet water temperature will affect the heating performance as it's only 3.5kW
• HARD WIRED ENDLESS HOT WATER - No need to preheat before using. As soon as you open the tap, the water fows with your desired temperature. High efficient, Energy Saving
• COMPACT DESIGN - Super compact designed, even smaller than a shoe box. Wall-mounted design frees up floor space for more storage, easy to install into washbasin and other tight spaces!
• EXCEPTIONALITY DURABLE - Instant hot water thanks to rapid and maintenance-free bare wire heating systems. High quality alloy bare heating element has good corrode resistance and acid-resisting, with longer lifespan, instantaneous heating efficiency up to 99%.
• NOTES - Please verify that this model is the right size for your hot water needs and electrical requirements before purchase & installation. Dimensions:7.4" x 5.4" x 3.4" ; Weight: 3.0lbs; Pipes fittings :1/2" NPT, Electrical requirements: 3.5 kW, 120 volts, Nominal pressure: 150PSI. Nominal current:29A. Required breakers:1x 2-POLE 30A. Required wire: 1 x 12 AWG . ( Breakers and wire are NOT included )

User questions & answers

Question:	Can you hook up to a sink and shower at the same time
Answer:	Doesn't work that way, you need to buy the right height, 2" and up. You don't want to stack them, I bought 6" with an already 6" so I was able to raise it to 12"
Question:	How to set water temp
Answer:	NO!!
Question:	Does this have a plug for electric? (american? European?) Or do I have to hard wire it
Answer:	These can be stacked on top of our 5" riser model CB650 to add a combined total of 8".
Question:	Me dice que es de 120 voltios , pero en las especificaciones dice 240 v y requiere un breaker de 32 amp., con cuantos voltios funciona
Answer:	As long as you can lock the frame in, yes

Product features

Thermoflow Elex3.5L Electric Mini Tankless Water Heater

Saves Energy & Money - Adopts to advanced technology of Germany. Changing to this Elex 3.5 means no standby losses. No need to preheat before using, no waste for water or electricity.

Endless Hot Water - Instant hot water thanks to rapid and maintenance-free bare wire heating systems. For as long as it is needed, there is an endless supply of hot water.

Easy Installation - Very compact designed, saving valuable living space and providing endless hot water on demand.

Electric Point of Use Tankless Water Heaters

thermoflow Elex 3.5L electric tankless water heater is a true Point of Use Model because it is specifically designed for over or under the sink, multiple applications and the temperature rise 45°F at 0.5GPM. At 72°F inlet temperature the Elex 3.5L can heat 0.72 gallon per minute to 120°F. It can also heat one hand sink emitting 0.5 gpm to 105°F with inlet temperature as low as 57°F. Its compact size allows for over or under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Bathroom Sinks. When sized properly this water heater will provide endless hot water.

Instantly Hot Water

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it. Due to short water lines and modern technology.

Saving Energy

No more long water lines and circulation losses because the units are installed directly at the point of use. The water is no longer preheated and stored in large amounts.That saves energy. And it saves investment costs: Long water lines, circulation pumps and hot water tanks are no longer necessary.

More Hygiene

Electric instant water heaters heat up the cold water to the perfect temperature within seconds, directly at the tap, as it flows through the unit. The heated water is used immediately and unused water is avoided in the water line systems. That’s why testing for Legionella bacteria becomes unnecessary. This is what makes de-centralised water heating more hygienic and efficient.

Great for Small Spaces

Water heaters are compact and lightweight and can be undersink or oversink installed - features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

• 1.No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.
• 2.Automatic circulation pump,Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
• 3.High temperature resistance, anti-fraying ,high efficiency, high flow.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
• 4.Liquid temperature range 0℉ - 212℉ Maximum working pressure 10bar(145PSI).
• 5.Power Cord: 4.1ft. Rated Power:120W,Voltage: 110V/120V Frequency: 60Hz Outlet: 3/4".

User questions & answers

Question:	Does this pump only work with SolarSystem
Answer:	No, this pump work perfect with 110v residential power too.
Question:	Is pump 15F hotter than water it is circulating ok? 110F circulating, pump is 125F
Answer:	Mine is pumping 125F water for 1+ years now. No issues
Question:	What is exactly automatic? Once started, does this automatically stop if it detects hot water on inlet side
Answer:	The pump can auto start when you open the faucet, the pump can auto close when you close the faucet.
Question:	Can this pump be used for hot water
Answer:	YES,you can.

Product features

KEEP QUIET TO WORK

Super silent, aesthetics, easy to install and operate.The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. No leakage, low noise, aesthetics, ease of installation and so on.

Wide Application

Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.

Easy installation

Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers

• Applicable to the duplex apartment,suburban villas,water heater pressurized,household water pressurized, and the solar water heater pressurized. Our water pressure pump especially suitable for water heater pipe pressurization with insufficient water pressure, to prevent water supply from being cold.
• Max Pressure: 1.5bar (21.7 PSI);Max Flow Rate: 396GPH(25L/min), Max Head: 49.2ft(15m); Liquid temperature range: 0 F- +212 F.the water boost pump with flow switch can automatically adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure.
• Easy installation, only need a wrench to connect the pump, saving you the cost of plumbers; the water booster pump is also Energy Saving ;Easy Operate and Silence Working.
• Powerful 120W Motor, High Quality Water flow switch and full brass fittings included, All-in-one unit to make the water booster pump durable and provide enough water pressure for home use.
• We provide 30 days free return and 3 months fittings parts replacement for our water boost pump.If you have any problems for using our products,feel free to contact with us at the first time,we’ll made you satisfied with your purchase.

User questions & answers

Question:	Me podría servir para extraer jabón líquido de tanques
Answer:	Yes. That is why we bought one in order to boost the volume of hot water in our Rheem hybrid. It works well.
Question:	Will the pump shut off atomatically once i turn my shower off
Answer:	It is designed to be installed on a water heater and incorporates the electric that feeds the main tank. I would advise you to look into a dedicated device designed for under the sink.
Question:	Does anyone know what the thread is on the output side. Looks like 1/2 in. pipe but it is not
Answer:	I am sorry I don’t know but I am happy I have it
Question:	Just got it installed and doesn’t matter if switch is on 1 or 2 it keeps going on and off with no water running! What’s the deal
Answer:	The more HP the more Strength, the 1/2 HP moves 10Gal per minute and the 1HP moves 13 Gal per minute. However, all the Truper Water pumps extract from a maximum depth of 26Ft under ground.

Product features

KOLERFLO Home Pressure Boost Pump

Applicable to the duplex apartment,suburban villas,water heater pressurized,household water pressurized, and the solar water heater pressurized.

Our water pressure pump especially suitable for water heater pipe pressurization with insufficient water pressure, to prevent water supply from being cold.

Low Noise and Energy-Saving

• No leakage, low noise, environmental protection, aesthetics
• Simple operation and save power
• Prolonging the service life of the motor
• The coil uses 100% copper wire to ensure efficient and stable operation of the motor
• Can effectively solve the high temperature and noise generated by the high-speed operation of the motor.

Easy to install and adjust to your needs

• Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
• Simple operation and save power.
• Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure.

Automatically runs for all Applications

• Automatically adjusts to your needs,Increase the pressure of household water tank and keep a steady pressure
• Pressurize for solar water heaters, boost pressure and circulate water for water heater and Wall-hung stove
• kolerflo hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it completely solves the problem that the higher floors do not have water while the lower floors have.

Product description

New in box. This item must be shipped freight to destination in US. Charges for shipping will be explored with buyer prior to finalizing.

Product description

The thermostatic mixing valve installed on top of new or existing water heaters to increase the available hot water in the water heater's tank, kill bacteria by increasing tank's temperature, while also preventing scalding by releasing water at a safe temperature. Transforming the plumbing industry through innovation. Cash Acme, a trusted history. An innovative future.

User questions & answers

Question:	Does the water pressure drop when more than one faucet/shower is in use
Answer:	Hello Miguel. The HATB007240 is 100% compatible with 220V power. Feel free to ask us any other questions. GadgetsGo is an Authorized Eemax Distributor. Kind Regards, John M. GadgetsGo
Question:	does the gas bill increase or decrease after installing this
Answer:	As long as the piping is rated for hot water usage you will be able to use this for installation.
Question:	can i use this and a hot water recirculating pump together
Answer:	Hello Karl. Yes, this heater can use 3/4" NPT or push-to-connect connections. Feel free to ask us any other questions. GadgetsGo is an Authorized Eemax Distributor. Kind Regards, John M. GadgetsGo
Question:	Can I set the water heater to 160 to kill Legionella bacteria and still adjust to 120 or below at the output
Answer:	Best to check with the booster's customer service or a qualified installer. You can describe your situation for the best answer to your specific needs. Well-insulating your tank will help any recovery/maintain temp times.