9 best brasscraft gas ranges
BrassCraft is a well-known brand in the plumbing and gas appliance industry, specializing in the production of a wide range of plumbing products, including tubing, hoses, pipes, pipe fittings, and other related accessories. While BrassCraft primarily focuses on plumbing components, it does not manufacture gas ranges or appliances.
Gas ranges are typically manufactured by appliance companies such as General Electric (GE), Whirlpool, Samsung, LG, and others. These gas ranges include burners, ovens, and other cooking features. BrassCraft, on the other hand, is known for producing plumbing-related products such as gas connectors, water supply lines, and fittings used in residential and commercial plumbing systems.
If you are looking for information about gas ranges or specific brands of gas ranges, you should refer to appliance manufacturers or retailers specializing in kitchen appliances.BrassCraft does not manufacture gas ranges, so it is not associated with this specific product category.
Below you can find our editor's choice of the best brasscraft gas ranges on the market
BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler
BrassCraft Mfg
Product description
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. The BrassCraft Pro-Grade Range, Furnace & Boiler Installation Kit contains everything you need to connect most five & six burner gas ranges, furnaces and boilers to your gas supply. Includes easy-to-read installation instructions, 3mil tube of pipe thread sealant and 3mil tube of leak detection solution (fluorescent green)..
From the Manufacturer
BrassCraft's Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. The BrassCraft Pro-Grade Range, Furnace & Boiler Installation Kit contains everything you need to connect most five & six burner gas ranges, furnaces and boilers to your gas supply. Includes easy-to-read installation instructions, 3mil tube of pipe thread sealant and 3mil tube of leak detection solution (fluorescent green)..
- 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals
- Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve
- Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting
- Fits all current and most older five to six burner ranges, furnaces and boilers
- Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified
User questions & answers
| Question: | What are the dimensions of this item |
| Answer: | They say made in China. But they are shipped from Amazon. I don't believe they are shipped from China to your house, if that's what your asking. |
Plumb Shop Brasscraft PSSC-60 Gas Range Ball Valve, 5/8" Od x 3/4" Fip
Product description
A.G.A. Design certified for use with natural, manufactured, mixed, liquefied petroleum, LP gas/air mixtures. Lever handle. 1 per card. Made from high quality materials and highly durable.
From the Manufacturer
Gas Range Ball Valve PSSC-60
- A.G.A. Design certified for use with natural, manufactured, mixed, liquefied petroleum, LP gas/air mixtures, lever handle, 1 per card
- Made from high quality materials and highly durable
- A
- Model number: PSSC-60
BrassCraft PSC1107 K5 Safety PLUS Gas Installation Kit for Range, Furnace & Boiler
BrassCraft
Product description
The product is easy to use. The product is highly durable and handle. The product is manufactured in china.
- The product is easy to use
- The product is highly durable and handle
- The product is manufactured in China
- Country of Origin: United States
User questions & answers
| Question: | Is the safety connection a 3/4 male and the connection to the appliance a 1/2 or |
| Answer: | 12” x 6” |
| Question: | Does this produc work in a Restaurant, to conect a fryer |
| Answer: | No, the paper does not. The plastic is indeed 8 1/2" at the top, but then it narrows as it goes to the bottom. So when I put a piece of 8 1/2" x 11 paper in it, it did not lay flat. |
| Question: | Is the hose actually 3/4 inch |
| Answer: | No they do not leak and they are great for freezing food. |
Brasscraft CSSD54-60 Dryer and Water Gas Dryer & Water Heater Flex-Line OD x 60" FIP x 1/2" MIP
Product description
Connect your gas dryer, water heater or cooktop with this Gas Dryer and Water Heater Flex-Line (1/2 in. OD x 60 in. (1/2 in. FIP x 1/2 in. MIP) from Brass Craft. The connector features a corrosion-resistant coating to protect from harsh cleaning and plumbing repair products and can be used indoors or outdoors. The connector supports appliances up to 53,200 BTU.
From the Manufacturer
Brasscraft CSSD54-60 Gas Dryer and Water Heater Flex-Lines .
- Manufactured in China
- Easy to use
- Highly durable
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Water Heaters and Cooktops Up To 53,200 Btu
- 100-Percent Leak Tested
- Approved For Lp (propane) and Natural Gas
User questions & answers
| Question: | Is this a 3/8" or 1/2" line? That's sort of critical info |
| Answer: | Hello, there is no hole. It is basically a square with 8, approx. 2 1/2 inch, slits that you cut to fit. Also, they are not foil. If the flame does touch the fire retardant material it stinks. |
| Question: | How many inches long is it |
| Answer: | "what size of it guys? "...What kind of a question is that? |
| Question: | How long is this |
| Answer: | Of course but if you do not cut the hole large enough around the burner, they will catch fire--not flame but turn red like they are burning. |
| Question: | How long is this |
| Answer: | If by pegs, you mean the metal legs that the cap stands on, there are 4. |
Brasscraft CSSD54-36 Dryer and Water Gas Dryer & Water Heater Flex-Line OD FIP x 1/2" MIP x 36"
BrassCraft
Product description
CSSD54-36
From the Manufacturer
Brasscraft CSSD54-36 Gas Dryer and Water Heater Flex-Lines .
- Corrosion-resistant coating protects from exposure to harsh cleaning & plumbing repair products
- Stainless steel construction
- Ranges, water heaters, dryers & cooktops up to 71, 100 BTU
- 100% leak tested
- Approved for LP (propane) & natural gas
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
User questions & answers
| Question: | Are the male and female fittings 1/2" npt pipe threads? thank you |
| Answer: | I did a Google search, and got the following: Sometimes NPT threads are referred to as MPT ('Male Pipe Thread'), MNPT, or NPT(M) for male (external) threads; and FPT ('Female Pipe Thread'), FNPT, or NPT(F) for female (internal) threads. An equivalent designation is MIP (Male iron pipe) and FIP (Female iron pipe). From this, I would say that, Yes, they are the same. |
| Question: | What length and diameter is this gas line |
| Answer: | 3/8 in. ID (1/2 in. OD) corrugated stainless steel with corrosion resistant coating Steel fittings included: 1/2 in. FIP and 1/2 MIP (tapped 3/8 in. FIP) ProCoat coating resistant to ammonia, chlorine, solder flux, muriatic acid as well as UV rays & salt Use with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures 100% leak tested Approved for indoor and outdoor use Temperature rating: -40° to 150° F Pressure rating: standard line pressures up to 1/2 psi maximum Designed, Machined and Assembled in the USA CSA certified MFG Model # : CSSD54-36 X MFG Part # : CSSD54-36 X |
Plumb Shop Brasscraft CSSC21-48P Stainless Steel Gas Range Connector, 48-Inch
Product description
Brass craft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. Procoat is applied to the corrugated Stainless Steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, The ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance Available.; pressure rating: 1/2 PSI maximum; 100% leak tested; temperature rating: -40° to 150°f; use with natural and LP (propane) gases.
From the Manufacturer
48-Inch Stainless Steel Gas Range Connector CSSC21-48P
- Brass craft's ProCoat stainless steel gas connector is engineered with added safety in mind
- The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt
- Procoat is applied to the corrugated Stainless Steel connector using advanced powder-coat technology
Brasscraft CSSC14-36 Gas Range and Furnace Flex-Lines
Product description
Brasscraft CSSC14-36 Gas Range and Gas Furnace Flex-Lines.
From the Manufacturer
Brasscraft CSSC14-36 Gas Range and Gas Furnace Flex-Lines.
- Corrosion Resistant Coating Protects From Exposure To Harsh Cleaning and Plumbing Repair Products
- Stainless Steel Construction
- Ranges, Furnaces and Boilers Up To 136,000 Btu
- 100-Percent Leak Tested
- Approved for Lp (propane) and Natural Gas
User questions & answers
| Question: | How long is it |
| Answer: | It’s 5 ft 60 inches |
| Question: | What is the diameter |
| Answer: | Yes this is 60” long |
| Question: | What size are the fittings |
| Answer: | The crease marks eventually disappear. In my case it was because I didn't notice them under all the gunk. Place them carefully around the burner, because the heat from the burner will burn holes in the fabric. Also, the fabric leaks, so if you spill anything, you still have to clean up the mess or the liquid will bake on it. |
BrassCraft CSSC21-60 P 3/4-Inch FIP x 3/4-Inch MIP x 60-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 93,200 BTU
BrassCraft Mfg
Product description
SC Series, 1/2" I.D. x 5/8" O.D. Tube, 3/4" Female Pipe Thread x 3/4" Male Pipe Thread, 60" Pro-Coat Epoxy Coated, Stainless Steel Gas Appliance Connector, Product Comes in Re-Sealable Zip lock Bags, AGA Approved & IAS Design Certified For Indoor/Outdoor Use, Recommended For Gas Ranges.
From the Manufacturer
BrassCraft's 3/4 In. FIP x 3/4 In. MIP x 60 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 93,200 BTU's. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
- Manufactured in China
- Easy to use
- Highly durable
- 5/8 In. OD with 15/16-16 Thread x 60 In. stainless steel connector w/corrosion resistant coating
- 3/4 In. FIP and 3/4 In. MIP (1/2 In. FIP tap) steel gas fittings
- 93,200 BTU max flow capacity. Use with natural or LP (propane) gas
- Temperature rating: -40 to 150 Degrees F. Pressure rating: 1/2 psi maximum
- 100% leak tested. Approved for indoor and outdoor use. CSA certified
User questions & answers
| Question: | Can I use with a clothes dryer |
| Answer: | One flare end has a 3/4" external and 1/2'' internal fitting, the other is 1/2" external and 3/8" internal fitting |
| Question: | I need a 3/4 inch flex line. This says 3/4 and 5/8. Which is it |
| Answer: | The female end you see is 1/2 npt, the male end you see is 1/2 npt on the outside and 3/8 female npt on the inside. |
| Question: | Will this work a gas clothes dryer |
| Answer: | Its 5ft which is 60" inches |
BrassCraft CSSC44-72 P 1/2-Inch MIP x 1/2-Inch MIP x 72-Inch ProCoat Gas Appliance Connector, 5/8-Inch, OD 86,000 BTU
Product description
5/8" O.D. (1/2" I.D.). Flexible stainless steel corrugated tubing with stainless fittings. A.G.A. approved for indoor or outdoor use according to ANSI Z21.24 and Z21.45. 1/2" Male I.P.S. x 1/2" Male I.P.S. fittings. 1 per bag.
From the Manufacturer
BrassCraft's 1/2 In. MIP x 1/2 In. MIP x 72 In. ProCoat Gas Appliance Connector is 5/8 In. OD (1/2 In. ID) tube with a maximum operating capacity of 86,000 BTU's. This ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
- 5/8 In. Od With 15/16-16 Thread X 72 In. Stainless Steel Connector W/Corrosion Resistant Coating
- 1/2 In. Mip Steel Gas Fittings
- 86,000 Btu Max Flow Capacity. Use With Natural Or Lp (Propane) Gas
- Temperature Rating: -40 To 150 Degrees F. Pressure Rating: 1/2 Psi Maximum
Latest Reviews
View all
Easton Youth Baseball Gloves
- Updated: 23.07.2023
- Read reviews
26 Ladder
- Updated: 04.03.2023
- Read reviews
Gofit Gym Mats
- Updated: 25.01.2023
- Read reviews
Fountain Pumps
- Updated: 15.01.2023
- Read reviews
Wireless Mic Systems
- Updated: 11.03.2023
- Read reviews