14 best wet tile cutters

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

PORTER-CABLE PCE980 7 in. Table Top Wet Tile Saw features a powerful 1.0 Horsepower motor providing smooth cutting of porcelain, ceramic and Stone tiles. Cast-metal cutting cart delivers 17 in. Cutting capacity, allowing cutting of 12 in. X 12 in. Tile on a Diagonal. Get accuracy of 1/16 in. On cuts up to 12 in. Long. The Pce980 includes Pce980 7 in. Wet tile saw, 7 in. Porcelain tile blade, Miter square, blade wrench. Includes 3 year limited warranty, 1 year free service contract, and 90 day money back guarantee.

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

User questions & answers

Question:	how thick will this cut
Answer:	I would say 1:4, if you are cutting porcelain that thick take it slow, natural stone will cut easier. I highly recommend this saw, I use it for small jobs, it’s really great in tight spaces. In my opinion it’s the better of the smaller wet saws as I prefer a rolling table for more accurate cuts. I however use an MK on my bigger jobs and large format tile and stone and it’s a beast with no limitations but cost about 10x what this saw cost. I do a lot of baths and kitchens and I love it!
Question:	Alway problems substituting other brand blades - and can't find PC replacement blades - can anyone confirm good to excellent substitute
Answer:	I've tried several after market blades with this saw. The problem I've experienced is the original PC blade produces a slightly wider cut, allowing the tile to get past the guard support in the back. The blades I've tried produce a thinner cut that prevent the tile from passing around the guard support. I'll try the Pearl P4 7 inch to see if it works, although 50$ is a gamble I'd rather not bet on.
Question:	Can this saw cut glass tiles
Answer:	It can cut glass but without buying a blade specifically for glass tiles you might be disappointed. Every tile installer I know has several different blades always on hand for the abundance of materials thrown at him. Glass Master is a good glass blade and manual cutters often do excellent. With the stock blade you will get some chipping along the cut. Which could be polished out with extra effort. If you can handle chipping go for it.
Question:	Does this saw do miter cuts? Can you angle the blade, or the table
Answer:	Yes, this table saw does simple mitre cuts. The blade is fixed. The table is fixed (does not angle for a compound mitre cut). The product is positioned on the (right) cutting cart that feeds the tile to the blade. The saw comes with a miter square for basic angle cuts.

Product description

TILE & TABLE SAWS

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	How do you change the blade on this
Answer:	There is a blade lock and it should have come with a tool to change it
Question:	Gfci corded
Answer:	Yes,it is
Question:	Can this make a curved cut, say for around a toilet application
Answer:	The way to make inside curves is to cut parallel "fingers" and snap them off. Then use the saw blade to grind it to the line. Remember that the blade is cutting from top so you'll need to either flip the tile to grind the back or use a grinder. You can use a regular tile saw that way as well.
Question:	Could you cut geodes with this saw? With a diamond blade
Answer:	It would certainly cut into the geode, but depending on the wall thickness as to whether it will cut into the cavity.

Product description

The QEP Wet Tile Saw is ideal on job sites where space prohibits the use of a large wet saw. The 3/5 HP, high-torque motor and included 4 in. continuous rim diamond blade cuts through unlimited sizes of ceramic, marble, slate and stone tile up to 3/4 in. thick. This tile saw even cuts mosaic tile and backsplash tile for DIY projects. The water system not only reduces water runoff, it recycles the water back into the reservoir, minimizing refill frequencies. This dependable wet saw includes dual extension tables to support larger tiles and a hinged cutting table for miter cuts. A 4 in. blade with a 5/8 in. arbor is required. For cutting porcelain and hard tiles, we recommend using the QEP Black Widow Blade, sold separately.

• Easily cuts ceramic, marble, slate and stone tile
• Made from plastic to prevent rust and corrosion
• Portable design makes this wet tile saw easy to transport
• Hinged cutting table is adjustable for making 22.5 degree and 45 degree miter cuts
• Includes 4 in. QEP continuous rim diamond blade, rip guide, angle guide and clip-on extension table

User questions & answers

Question:	Does this machine come already assembled
Answer:	All tapcon screws require the correct size pilot hole be made first. After that depending on the size you may not even need any drill.
Question:	Will this saw cut slate roof tiles
Answer:	Xbox is the drill only . No batteries or kit.
Question:	What is the arbor size on this saw
Answer:	I don't think so, but I have not tried!
Question:	Can you cut a 21in tile
Answer:	It is better to use a hammer drill and special masonry drills for concrete. This drill would do it slowly and might wear out the masonry drill faster.

Product features

QEP 22400Q 3/5 HP Torque Master Tile Saw, 4-Inch

The Torque Master XT Portable Tile Saw is ideal on job sites where space prohibits the use of a large wet saw.

• 3/5 HP, hi-torque geared motor for maximum cutting performance
• Dual extension tables add extra 5" of cutting surface
• Cuts ceramic tile, porcelain tile (for porcelain and hard tiles, we recommend QEP's Black Widow Blade #6-4008BW), marble, slate and stone
• Fully adjustable miter guide with unique ratchet mechanism
• Cutting table is hinged to adjust for making 22.5° and 45°
• Water recirculation system saves time when replenishing water supply and keep work area drier
• Includes 4" QEP Continuous Diamond Rim Blade Black Series (6-4001Q)

Product description

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport. Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage. The stand holds the 69-pound Wet Tile Saw and provides an ideal work space. Durable aluminum framing and stainless steel rails are built to stand up to the tough jobsite environment. Lightweight folding stand easily sets up on the job and stores in the truck

Light, ultra-powerful, and a breeze to set-up, the D24000S from DEWALT is ideal for renovating bathrooms, cutting porcelain and stone, or tiling a kitchen back splash or floor. The D24000S ships in two boxes and includes the D24000 saw and the D24001 stand. The saw motor tilts and locks at 45 or 22.5 degrees for clean, smooth cuts without the need for an accessory cart block, and adjustable rollers help properly align the table. When tackling large projects, you'll appreciate the 24-inch ripping capacity (18-inch tile on diagonal). To ensure smooth operation, two adjustable water nozzles allow for the correct positioning of spray on the blade, while optional rear and side water attachments capture over-spray so water stays in the five-gallon pan. Additionally, a 3-1/8-inch depth of cut gives you the option of cutting the majority of V-caps and pavers, and an edge guide with dual position 45-degree guide makes it a snap to line-up corner cuts. There's also an efficient 1.5 HP motor, flip-style edge guide for 90 and 45 degree set-up, and a tub-style bottom with four molded sections that fit into the included stand. And because there's a fully integrated durable stainless steel rail system in the saw frame, you'll enjoy precise cuts every time. When you're done for the day, the removable cutting cart gives you better access to the saw so you can clean up quickly and easily.

• Your purchase includes One Dewalt 10-Inch Wet Tile Saw, Wet Tile Saw Stand, 10-Inch XP4 Porcelain Tile Blade, Submersible Pump, Water Pan, Side Water Tray, Rear Water Tray, Cutting Cart Side Extension, Angle/Rip Guide, Blade Wrench & Hex Wrench
• Tool dimensions: 36” L x 29” W x 24” H. Tool weight: 69 lbs. Voltage – 120V. Peak Horsepower – 1.5 HP
• Other specifications: Arbor Size – 5/8”. Blade Diameter – 10". Diagonal Cut Capacity 18” x 18”. Max depth cut – 3 1/8”. Max Rip Capacity with Plunge – 28”. Bevel Capacity – 45ᵒ
• Cutline indicator and stainless steel rollers provide stable, accurate cutting to within 1/32 inch over 18 inch cuts
• Compact saw frame allows for easy transport and storage in vehicle

User questions & answers

Question:	where is this saw made
Answer:	The sticker on the motor says Taiwan.I don't remember what was on the box.
Question:	Does this saw have enough vertical clearance to cut a 4" thick block by cutting halfway through and flipping it over to finish
Answer:	I Cut a 3" X 4" X 8" Concrete Paving Brick in half with one pass, with room to spare.I estimate it will cut close to 4 inches with one pass. Plenty of water is essential for a beautiful cut.
Question:	What is the length of the tray
Answer:	The tray is 25.5" wide x 35" long...hope this helps.....
Question:	Hi Does it come with a blade
Answer:	Yes, is coming with DeWalt blade. If I good remember thats DW4762

Product features

DEWALT D24000S Heavy-Duty 10-inch Wet Tile Saw with Stand

The 69-pound D24000S 10" Wet Tile Saw allows a one person set up and transport.

Stainless steel rail system is integrated into the tile saw frame, insuring accurate cuts. Rear and side water attachments can be placed on tile saw to catch over-spray from large tile to keep the water in the pan.

The D24000S includes a 10" Wet Tile Saw with a stand that folds for easy transporting and storage.

The stand holds the 69-pound Wet Tile Saw and provides an ideal work space.

Product description

7-in. Job Site Wet . Tile Saw w/ stand (included). This is the most affordable pro tile saw on the market. Its powerful 3/4 HP motor, best-in-class cutting capacities

Feature:

• Powerful 3/4HP motor delivers 3,500RPM to cut tile with stalling
• Folding stand allows tool to be used on many different job sites
• High-volume water pump helps protect blade from water damage
• Oversize splash table reduces overspray

Specifications:

• Type: Tile Saw
• Motor: 120v/60hZ
• Horsepower: 3/4
• No-Load Speed: 3450RPM
• Blade: 7" x 5/8"
• Bore: 7/8"
• Cutting angles (Deg): 0-45°
• Cut Capacity: Rips, 16"; Diag 11"mm; Depth 1"
• Pump Max. Flow: 10-12 Liters Per Minute
• Water Tray Size: 26"(L) x 16-3/4"(W) x 5"(D)
• Stand Included: Yes

Package Content:

• Tile Saw
• Stand

• High-volume water pump helps protect blade from water damage
• Powerful 3/4HP motor delivers 3,500RPM to cut tile with stalling
• Folding stand allows tool to be used on many different job sites
• High-volume water pump helps protect blade from water damage
• Cut Capacity: Rips, 16"; Diag 11"mm; Depth 1"; Blade: 7" x 5/8"; Bore: 7/8"

User questions & answers

Question:	Does this saw come with a blade
Answer:	It will. But is hard¡¡ we cut a few sweet potatoes and the Blades still Fine. Is a good quality.
Question:	What's the country of origin
Answer:	I do not know about suction cups. Wall mounting makes it easy to cut the spuds. I would think mounting it horizontally would require too much effort
Question:	Will it cut glass bottles
Answer:	Yes all the parts are for sale separately
Question:	Can i cut rocks on this,saw
Answer:	I am pretty sure you can get replacement blades, as long as you have the spinning parts.

Product description

Specifications:



Arbor Size: 5/8"

Motor: 120V/60Hz/5A

No Load Speed: 3550 RPM

Blade: 7” Diamond Blade

Table Tilting Range: 0-45°

Table Size: 15-3/4” × 16-1/2”

Max Cutting Capacity: 1” Thick, 12” Wide

Package: 7-Inch Tile Cutter, 1 Spanner Wrench, 1 Nut Driver, 1 Instruction Manual



Features:



Reinforced impact-resistant tub

Lightweight, fully portable to carry

Chrome plated table to resist rust

Bevel cuts tile from 0 to 45 degrees

Water cooling system for wet cutting

Adjustable rip fence with miter gauge

Powerful induction motor with thermal protector

Simple structure, Easy to use, Easy to maintain

Make quick, precise cut in tile, marble, masonry, ceramic



Leegol Electric 7” wet tile saw, uses an adjustable rip fence with miter gauge providing accurate straight and miter cuts. Diamond blade ensures smooth cutting along with a blade cooling water reservoir that keeps the blade cool and minimizes dust and debris.



This tile saw is ideal on job sites where space prohibits the use of a large wet saw.Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the Leegol 7-inch Wet Tile Saw (3550).Users will be surprised by the strength of its true induction motor. This economical, yet powerful saw cuts through unlimited sizes of ceramic and tile.



Whether you’re a DIY lover, a crafter, or a woodworker, the Leegol wet tile saw is the perfect companion for every project on your list.

• Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types
• Adjustable rip fence with miter gauge - for accurate straight and miter cuts
• Blade cooling water reservoir - keeps blade cool and minimizes dust and debris
• Powerful induction motor - supply generates up to 3,550 RPM for the most demanding jobs
• 100% Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality wet tile saw.If you get a poor saw,contact with us,we will supply a new one.

User questions & answers

Question:	Do any of these cut into silverware
Answer:	Hello,the tile saw could not cut into silverware.
Question:	Can it be used to cut brick? I have whole bricks that I want to convert to brick veneers
Answer:	I don’t think it will cut that thick of a product
Question:	What is the maximum thickness it will cut
Answer:	Mine was DOA so it didn't cut anything. Very cheap product, many issues. I would spend a little extra and get a product that does the job, which this one does not.
Question:	Does this saw do a decent job of catching the dripping water or did it make a mess
Answer:	This wet saw, Does not have : 1- Model number, 2- Name, 3-Serial number, 4-Technical support number and email 5- Not any CONTACT US information

Product features

7 In. Portable Wet Cut Tile Saw

This compact 7 in. wet tile saw cuts masonry as thick as 1 in.

The table on this wet cut tile saw adjusts for beveling.

Reinforced tub stands up to jobsite abuse.

Fully portable, works wet.

Chrome Plated Table Top

Chrome plated table top will resist corrosion after multiple uses.

Table Tilts to Make 0-45° Bevel Cuts

The 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

Blade cooling water reservoir keeps blade cool and minimizes dust and debris.

Product description

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

User questions & answers

Question:	will this saw, with the standard blade that comes with it, cut glass bottles
Answer:	I don't know for sure. I did cut quite a lot of glass tile. I had to a different blade for glass. it did an exceptional job. In fact i used it to install 2500 sqft of tile in my house. It still has good life left in it.
Question:	Need to slice 1/8"-1/2" glass rods coe 104 & 32. Slice cylinder= thickness of rod & length of 4mm. cut should be clean but not pristine. Will thiswork
Answer:	Thank you for your question. The Skil 3550 is not designed for cutting glass, it is designed for cutting tile. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-754-5999
Question:	Does this include a blade? The info @ Amazon says bare tool, yet the Skil website says yes
Answer:	Yes, the blade is included. The tile saw includes the 7 in. Diamond Blade, Side Extension, Rip Fence, Miter Gauge, Blade Guard and Blade Wrench.
Question:	Why is this model so much more expensive than the model is replaced? The 3540-02 was half this price, so what is the difference
Answer:	Thank you for your question. The Skil 3550 can cut tiles up to 18x18 inches, has an aluminum table top and also our Patent Pending HydroLock System which is an innovated upper and lower guard design that keeps water contained near the blade. The Skil 3540 cuts tile up to 12x12 inches, has a stainless steel table top and does not have the HydroLock System. If you have further questions please feel free to contact our Skil Customer Service Representatives at 1-877-SKIL-999 (1-877-754-5999).

Product features

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.

Product description

VIYUKI Portable Wet Cutting Porcelain Tile Cutter Table Saw 7-Inch Wet Tile Saw

• Product Parameter: 120V/60Hz/5A/7" Blade
• High-quality tool:Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Professional Blade water cooling system :keeps blade cool and minimizes dust and debris
• Professional induction motor - supply generates up to 3,560 RPM.
• Pack your satisfaction with the quality: With a manufacturer warranty you can be sure you will get a quality tile saw.we will supply a new one with any flaw on the package or some quality problems.

User questions & answers

Question:	Is blade included
Answer:	It works with my drill and the dermal tool I have but that is all I can state.
Question:	Can i cut laminate flooring
Answer:	Recommend wood drill bits. It might for harder plastic but not soft plastics

Product description

The Amazing Tile And Glass Cutter Is A Hand Tile Cutter That Allows You To Cut Shapes In Ceramic Tiles, Glass, Mirror, And Floor Tiles. The Extreme Hardness And Optimized Angle Ground Into The Cutting Wheel Allow The Tool To Cut Wall Tile, Floor Tile, Glass Tile, Most Porcelains, Quarry Tile Up To 3/4" Thick Glass, Plate Glass, Stained Glass, Picture Framing Glass, Fused Glass, Textured Glass. And Even Mirror Glass . Cutting Thin Glass Can Be Done By Folding The Breaker Forward Making The Gap Smaller So Glass Sheets For Crafts Can Be Cut From 1/16" To 3/8" Thick. Really Thick Glass Can Be Cut Using Techniques Included In The Detailed Instructions. Apply A Drop Of Light Machine Oil To The Scoring Cutter When Cutting Ceramic Flooring Tiles Or Glass Cutting Oil . With A Regular Glass Cutting Tool There Can Be A Difficulty When It Comes To Breaking Of The Glass But This Tool Has The Glass Running Pliers like Rozen Pliers Built In. This TOOL is Not Tile Nippers it scores the tiles. This hand tool set is a great addition to your Household Tool Kit. Cutting large ceramic tile without the wet tile cutting saw.

• EASY TO USE TOOLS FOR CUTTING TILE: Thorough printed Instructions for the girls, pictures and videos for the boys, how to cut Ceramic Tile, How to cut Glass Mosaic Backsplash, How to Cut Porcelain Tile, How to Cut Radius ,How to cut Straight lines, wiggly lines and how to clean up afterwards.
• NO WET SAW RENTAL NO MESSY TILE SAW CUTTER : Even Professional Tilers don't like the mess a wet saw makes and that even the best diamond blades can chip the edges of the tiles, and forget about cutting glass mosaic backsplash tiles on a mesh with a water saw, they chip, scrunch up, fly away, and when they get wet they fall off anyway. So you end up pushing each tiny tile through the wet saw with what’s left of your fingers.
• NO RUNNING IN AND OUT THE HOUSE From the Basement or The Driveway, Trailing Through The House Up and Down The Stairs in the Freezing Rain or Burning Sun a Thousand Times with Every Single Tile For Every Single Cut, You Can't use a Wet Saw in The House - She Won't Let You ! She’s Right It's Way Too Messy! And If you do, you’ll be in Marriage Guidance, and still be finding bits 20 years from now
• HOW TO CUT GLASS MIRROR STAINED GLASS SHEETS: With Hints Tips and Trade Secrets. Do you know anybody that didn’t break the last piece of Glass they tried to Cut? That's because 99% of the Wheels are junk Reconstituted Tungsten Carbide , they Wobble across the Glass you can’t see a line because there isn’t one, then you Tap it with that Ball Thing on the End, Tap Tap Tap, cross your fingers close your eyes and hope for the best, then pick another bunch of broken pieces off the floor.
• UNCONDITIONAL LIFETIME GUARANTEE MADE IN SCOTLAND GREAT BRITAN : Stamped on the side not printed on a removeable sticker. Lets face it If you were Bungee Jumping what would you want stamped on the side Made in Great Britain or Made in, Well Some Other Place

User questions & answers

Question:	Can this be used to cut around an outlet in two directions (vertical + horizontal cut) for a 3x6 ceramic subway tile
Answer:	No, it doesn't come with blade cover.
Question:	buenas noches, sirve para cortar ceramica en formatos grandes
Answer:	Yes, but it is a decent knife
Question:	Anyone use this on large format tile
Answer:	Yes, the Vollrath 47713 3/8" Potato Cutter can cut turnips.
Question:	Can this be used to cut luxury vinyl tile
Answer:	The 3/8" replacement pusher block (Vollrath 45749) may be found on Amazon with ASIN: B00NXWK7UU.

Product description

The QEP 900XT Pro Tile Saw features a powerful 2.25 HP, 15 Amp motor that easily cuts through ceramic tile, porcelain and stone. This saw has a large cutting capacity to perform rip cuts on 24 in. tiles, diagonal cuts on 18 in. tiles, as well as having the ability to cut large tile or pavers up to 3-3/4 in. thick. The 900XT Tile Saw features full-coverage splash guards, two side trays and a large rear water containment tray to help minimize overspray, keeping the work area dry and clean. In addition, the side extension on the saw table offers maximum support for large format tiles. These attributes, coupled with the laser cutting guide, LED work light and the rubber-coated aluminum table to help keep tiles in place, make the rugged QEP 900XT, a powerful tile saw with the features that matter most to the tile contractor.

• Powerful 2.25 HP, 15 Amp motor cuts for fast and accurate cutting of all types of tile including ceramic, porcelain, slate, stone and marble
• Equipped with a premium porcelain-rated 10 in. diamond blade for cutting the toughest tiles
• Adjustable plunging and pivoting motor head for interior cutting, miter cuts and rip/angle cuts
• Designed with a quick-release folding stand and oversized wheels making it easy to transport around the job site
• Side extension table for supporting large format tile

User questions & answers

Question:	How many inches from the blade to the left bracket holding motor up
Answer:	Yes20 "diam
Question:	how many rpm is in the machine
Answer:	It means it does need to be placed on the grinder in any certain way. Hope this helps
Question:	Will this saw do plunge cuts
Answer:	It should. It cut ceramic and porcelain tile like butter.
Question:	Will this saw do plunge cuts
Answer:	It is designed to cut steel but if you had to it would probably handle 1/8 inch or less. If you are thinking of buying it for that purpose, get a hss metal hole saw instead.

Product description

Ron Meyer and Si Kraft established Kraft Tool Co. in 1981. Quality is a mainstay in our business. In order to supply our customers the best products, we have strict quality control while sourcing material globally to use in our manufacturing facilities in Shawnee, Kansas; Neodesha, Kansas; and Sharon Hill, Pennsylvania. Over our 37 years we’ve grown from a small building to a sprawling manufacturing and warehouse facility. Our brands have been making products since 1798 with W. Rose masonry tools, Superior Tile Cutter since 1938, and Sands Level & Tools since 1895, and Gator Tools since 2008. Thank you for supporting Kraft Tool Co. As always, our of providing you the highest quality tools and service is our most important job.

• Country Of Origin: United States
• Model Number: ST006
• Item Package Dimension: 9.0" L x 6.0" W x 0.375" H
• Item Package Weight: 1.0 lb

User questions & answers

Question:	where can i get replacement pads for the Superior Tile Cutter
Answer:	Yes it did, it lasted for a small bath floor (hexagonal porcelain tile) and had to be replaced midway thru 3x6 ceramic tiles. Still working through another bath tile job... tho for the 24” tiles we had to make a couple cuts due to the narrower space between the blade and the side mount....
Question:	Is the rib/ridge on base (what the tile gets snapped against) supposed to go all the way to the fence? Mine stops short about almost 1/4". Thanks
Answer:	China
Question:	Where can i get replacement cutter wheels
Answer:	It cuts glass tile so it should cut all glass however I don't think a bottle will fit between the blade and table it's less than 2"
Question:	I need to cut 3/8" marble tile, both 1/2" x 1/2" and 1/2" x 2" tiles. Will this cutter work for me
Answer:	Maybe brick, but I think you would burn the saw motor out with rocks. They are really tough to cut

Product description

★Brand name:Stylish Y&I.

Our brand means that：You and I,everybody is a unique individual. All forces come together and it is a powerful group. You deserve to have all the best.

★Outer Diameter：180mm /7 inch

★Arbor:7/8",20mm,5/8" (22.23mm-20mm-15.88mm)

★Core Thickness:1.6mm; Base thickness:1.2mm

★Segment Height:10mm

★Rpm:8400

★Quality:A class

★Universal cutting:dry and wet cutting

★All our products are under strict quality control.

★Our tile saw blades offer a faster cut rate at a constant depth, which is ideal for Porcelain tile, ceramic,Granite ,Marble,Vetrified tiles,and so on.

NOTICE:

1.The cutting machine should have a protective cover or other safety device.

2.Operators should wear protective equipment:such as protective glasses, protective masks, overalls, protective shoes, etc.

3.Make sure that the direction indicated on the saw blade is the same as the direction of rotation of the cutter.

4.In order to prolong the life of the saw blade and cutting effect, please do not cut for a long time during dry cutting. Cooling water should be added when wet cutting.

5.Please do not curve cutting.

Guarantee：

★Friendly Customer Service.Any Questions,Please Feel Free to Contact us.We Will Respond to You Within 12 Hours and Give You a Good Solution.

• ★Size:180 x 10 x 1.6 x 22.23 mm; Outer Diameter:180mm /7 inch; With reducer washer for arbor:7/8",20mm,5/8" (22.23mm-20mm-15.88mm); Thickness：1.6mm
• ★Hot-pressing Blades Designed for cutting ceramic,porcelain tile,granite, marble,vetrified tiles,ect.
• ★X teeth offer fast and smooth cutting.Diamond blade for long-lasting performance and minimal chipping.
• ★Premium-grade,Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
• ★Tile blades:outer edge is plenty strong.Well balanced well made. Smooth cutting and clean.

User questions & answers

Question:	Will this cut dmall glass tiles
Answer:	Hola, puedes cortar baldosas grandes, pero necesitas usar el metodo de 2 manos y aplicar presión inclinándote tambien.
Question:	Has anyone tried to cut pavers with this disc
Answer:	yes, on tile provided with purchase, worked well, I only want it for glass work, and so far, it keeps surprising me with how well it works
Question:	With eye protection and a mask can this blade be used with a circular saw? Only need a few 1" tile cuts without tile saw
Answer:	Hi there, the Amazing Tile And Glass Cutter is not designed to Cut Vinyl Tile because it is not actually a sharp blade, it is Just an Extremely Hard Wheel like Diamond so when Scoring, it Actually Weakens the Glass or the Harder Side of the Tile. Then the breaker bends the Glass or Tile and because it is a rigid material it follows the weakness and breaks cleanly. As Vinyl tile is a relatively soft material it will need to be cut with a sharp blade and whilst it can be bent over a table edge, it cannot be split in the same way a Tile can. Hope this helps Paul.

Product description

The 72 lb. Combi 250VA is Imer's bread and butter 10" tile saw. This saw sets the standard for overhead rail saws for cutting tile and stone on the jobsite. It includes the new Imer 1.75 hp class-leading motor. Aircraft quality cast aluminum materials make for a rigid and light weight saw which will maintain its finish for years to come. This makes the saw extremely easy to clean: just spray with WD-40 and wipe clean. For additional accuracy, the 250VA includes a laser guide. This improves accuracy, a feature this saw was known for already! This allows very accurate chip free cutting, as grout joints and slab look installation sare more and more common. For these larger tiles, the included extension table makes cutting easier and more convenient. The new 1.75 hp, high torque motor means this saw cuts even faster than it's predecessor. Sealed bushings ensure plunge cuts are smooth and precise. Comes with blade, stand and accessory side table. The feet on the stand are rubber so the stand won't slip on or scratch the floor.

• New 1.75 hp high torque motor (110v 15amp)
• Max cutting length 28" (31" with plunge cut)
• Max cutting depth: 3-3/4"
• Laser guide on cutting head
• Includes saw stand, diamond blade, extension table and protractor

User questions & answers

Question:	i need start capacicitor
Answer:	We have this and works great goes all the way to the end . Lift up and score and snap. My husbands been doing tkle 20 years in tx. And superiors real popular here. I just bougjt him this for christmas works great so far.
Question:	Is this a 120 volt saw
Answer:	I don'tknow I gues from a tile showroom or Amazon.
Question:	What size tile can be cut on this saw
Answer:	Marble is pretty fragile. The only board that will is a sigma. I own one and I can say top of the line. I own 2 superior and 1 sigma all for different use
Question:	Just need a water pump for imer 250v 10 inch
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Hi there, we sell a range of kits that include drill bits saw blades and hole saws in the same listing for different tiling projects, for this you will want one of the kits that comes with The Amazing Tile And Glass Cutter + Rodsaw (a round 10" Hacksaw blade that fits any adjustable hacksaw Frame) + Diamond Circular Bl… see more Hi there, we sell a range of kits that include drill bits saw blades and hole saws in the same listing for different tiling projects, for this you will want one of the kits that comes with The Amazing Tile And Glass Cutter + Rodsaw (a round 10" Hacksaw blade that fits any adjustable hacksaw Frame) + Diamond Circular Blade that fits any small angle grinder. The Rod saw allows you to cut in any direction in Subway Wall Tile Travertine Marble and Slate, even padlocks actually, The Diamond Circular Grinder Blade allows you to cut every type even porcelain and granite so you can cut out corners and notches in the hardest materials too and when used in connection with the tile cutter can even cut a square hole or circle for a toilet flange! see less Hi there, we sell a range of kits that include drill bits saw blades and hole saws in the same listing for different tiling projects, for this you will want one of the kits that comes with The Amazing Tile And Glass Cutter + Rodsaw (a round 10" Hacksaw blade that fits any adjustable hacksaw Frame) + Diamond Circular Blade that fits any small angle grinder. The Rod saw allows you to cut in any direction in Subway Wall Tile Travertine Marble and Slate, even padlocks actually, The Diamond Circular Grinder Blade allows you to cut every type even porcelain and granite so you can cut out corners and notches in the hardest materials too and when used in connection with the tile cutter can even cut a square hole or circle for a toilet flange!