13 best skilsaw table saws

Product description

The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2” (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup.



This large coated cast aluminum tabletop saw comes equipped with a 10”, 24-tooth carbide blade. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages.

• RACK AND PINION FENCE RAILS – Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
• INTEGRATED FOLDING STAND – Legs quickly fold in to provide portability and convenient storage
• PARALLEL BLADE ALIGNMENT – Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
• 4x4 CUTTING CAPACITY – Cuts material up to 4x4 at 90 degrees
• 2-47° BEVEL CAPACITY – Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
• DUST PORT ELBOW – Redirects dust to a container for easy cleanup

User questions & answers

Question:	Does it come with a blade
Answer:	Yes it comes with a blade! Not one of the best but it will get you started.
Question:	Will the saw sit flat on a work bench when legs are folded up
Answer:	Hello, Yes this saw can sit plat with the table folded up underneath. Thank you for your inquiry!
Question:	Is the miter slot a standard 3/4" size
Answer:	Yes
Question:	Why is Amazon humping the Skil router with this saw? Can you mount it from underneath and make a router table
Answer:	No. You can't attach a router to this table saw. A recommended table for the router could be the Skil RAS900 Router Table.

Product description

The SPT70WT-ST is designed exclusively for use with the SKILSAW SPT70WT-01 10 in. portable Worm Drive table saw. The stand features tool-less latches to secure saw to stand quickly. Users can level stand on uneven surfaces with easy leveling adjustment. The portable jobsite stand is lightweight with a folding design for easy setup and transportation.

• Exclusively designed for use with SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
• Folding design and tool-less latches provide for fast and easy setup and transportation
• Easy leveling adjustments
• Durable all-steel design
• Only 14 lbs. for effortless portability

User questions & answers

Question:	Can a ridgid brand table saw attach to this item
Answer:	This table saw stand is designed specifically for the Skilsaw Worm Drive Table Saw SPT70WT-22. It has not been tested for use with other brands or models.
Question:	Will this work for a skilsaw
Answer:	Excellent question! It will not, as this stand was exclusively designed for use with SKILSAW SPT70WT-01.
Question:	Could someone please provide the dimensions of the top part where the saw sits? Thanks
Answer:	I don't have the stand, but at Home Depot I measured the Skil SPT70WT table saw's bottom rails that fit to it, which must be close to the same - they sit right over it. The table saw base is a rectangle of steel tubes, so there are inside and outside dimensions. The tubes are 1-1/4" OD. Tbl saw base Inside dimensions : 21-5/8" x 17-1/2" Tbl saw base Outside dimensions : 24-1/8" x 20" From the photos, it looks like the stand might be a tad longer in the longer (width) dimension.
Question:	Will this work with the SPT
Answer:	Hi Terry! This stand is exclusively compatible with our SPT70WT-01 10" Portable Worm Drive Table Saw. Thanks for your question!

• Legendary worm drive gearing offers maximum torque for ripping applications
• Precision rack and pinion system makes fence adjustments quickly and smoothly for accurate cuts
• Light weight and compact footprint make it easy to move around the jobsite
• Tear through sheet goods and slice up to 3x with the 2-5/8 inch depth of cut and 25 inch rip capacity
• All-metal construction delivers legendary durability

Product description

• Your purchase includes one Dewalt table saw, 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
• Other Specs: Max rip to left of blade – 22” | Max rip to right of blade – 32-1/2” | Max width of Dado – 13/16” | Arbor size – 5/8” | Amps – 15 | Depth of cut at 45° – 2-1/4” | Depth of cut at 90° – 3-1/8” | No Load Speed: 4800 RPM
• Rolling stand designed for easy set up and breakdown with excellent stability
• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

User questions & answers

Question:	Can i mount the axtra 8-outlet power strip on the table saw
Answer:	Can't see why not. Look online for Garmin-compatible charts, whether from Garmin or not. (My hiking map, with contours and more trails than the USGS maps, was a free download! Look around.) The eTrex models are waterproof, which is a plus. Think seriously about the display size, though. The whole unit fits in the palm of your hand, and its display is only a couple inches high. (See the specs. I might be off a little.) We hikers and hunters can stop and consult the unit, then start walking again. Your boat might travel quite a distance while you peer at that tiny screen, even with the engine stopped. Just a thought.Garmin obviously had boaters in mind when they programmed this, regardless of its size. It even has a "Man Overboard" function that instantly records its current location, then displays the distance and direction back to there while you turn the boat around. It shows tides, too, at whatever tide stations are close to you. Bottom line: it will do everything you need (I think) and do it all day and on into the next morning on a pair of AA cells, but your eyes will ask you why you didn't buy something with a bigger screen.
Question:	What are the dimensions of the unit on the stand when closed up. WxHxD? Need to know if it will fit in the storage cubby I have in the garage
Answer:	The maps that come preloaded are: Worldwide DEM Basemap (NR), Digital Globe demo (Jnx) and USGS Quads - Grand Canyon National Park (Jnx). Unfortunately, you will have to get the topo maps separately.
Question:	Does this saw accept dado blade set
Answer:	yes on the compass (electronic) but turn on the WAAS depending on if you set the compass for a true north or magnetic north WAAS gets rid of the errors jumping from satellite to satellite
Question:	How good would this saw be for a beginning woodworker on a limited budget
Answer:	The Oregon and all the Garmin "state" models all have a touch screen, don't they? The eTrex series doesn't. For controls it has the Power/battery check button and "back button on the right, and on the left, the zoom-in and -out buttons, plus the Menu button. On the front, at top-right, is the main control, a little thumbstick. Use it for scrolling and selecting menu items and for moving the map beyond your location.You'll want to spend some time reading the manual; this thing has a LOT of functionality. Most important shortcut: no matter how deep you go in the menus, double-tapping the Menu button takes you back to the main screen, with Map highlighted.

Product features

10" Jobsite Table Saw 32 - 1/2" (82.5cm) Rip Capacity, and a Rolling Stand

The DWE7491RS 10" Jobsite Table Saw 32 - 1/2" Rip Capacity, and a Rolling Stand has a 15 Amp motor and 32-1/2" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Rolling stand designed for easy set up and breakdown with excellent stability.

• Material support, can be used for narrow rip cuts
• Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use
• Telescoping fence rails retract to create a small, portable package
• 15 amp Motor quickly rips through hardwoods with ease

Features

• Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
• 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
• Rolling stand designed for easy set up and breakdown with excellent stability
• Flip over ripping fence allows for narrow rip cuts
• 2-1/2" Dust Collection Port easily connects to a vacuum for efficient dust extraction
• 21-7/8" X 26 - 3/8" table provides superior material support

Product description

Skilsaws legendary worm drive table offers all the torque to plow through plywood and more with ease. The dual-field motor runs cooler so it can work harder longer. You'll be able to do quick fix fence adjustments with the rack and pinion fence system. A left side support helps you manage extra large stock. Keep dust and debris under control with a vacuum to the dust shoot. Or use the convenient dust elbow to direct it into a bucket for easy disposal. The rugged heavy-duty stand features 16-inch wheels giving you the ability to roll over stairs or any tough terrain that might be in your way.

• 10 inch worm drive table
• Cuts through 4X for increased productivity
• Includes:
• SPT99 10 in. SKILSAW Heavy Duty Worm Drive Table Saw with Stand
• Miter Gauge, Smart Guard System including Anti-Kick Back Device, Dust Elbow, Insert Plate, Push Stick, Wrench, Rip Fence

User questions & answers

Question:	Do you think it would be possible to install the jessem clear-cut ts stock guides on this fence? thx
Answer:	Not w
Question:	Other than framing construction, what are your experiences with finish work using this saw
Answer:	Mine seems to be fine .It does a good job on the thicker lumber .It seems to hold a good rpm when cutting thicker lumber.Well pleased with my saw
Question:	What is the weight of the saw itself
Answer:	I just got off the phone with Bosch who owns skil and they said there was no difference. I'm thinking the person i talked to didn't really know. But the -01 is about $85 more. I'm thinking it has more Magnesium parts other than the housing to make it that 4 lbs. lighter according to info listed than the -22. Just a guess though. Sometimes product info here is wrong or incomplete.
Question:	What's the difference between the spt99-11 and the spt
Answer:	Hi Ashley! The maximum cut depth at 90 degrees is 3.688 inches.

Product description

With the capabilities of a standard miter and table saws, the compact SKIL flooring saw model 3601 allows you to cut flooring right where you're installing. Durable, lightweight and portable, DIYers and flooring specialists agree it makes wood floor installation easier and faster.

• Cuts solid, engineered and laminate flooring with ease
• Makes cross, miter and rip cuts
• Lightweight design for transport and use at any project location
• Miter detents at 0, 22.5 and 45 degrees
• Die-cast aluminum miter and rip fence

User questions & answers

Question:	How is the second 45deg cut made on 1/4 round to make piece for the 90deg corner? It’s obvious how to make the 1st 45deg cut, not the seoncd
Answer:	No, the DCCS620P1 does not include a case.
Question:	How well does it handle rip cuts? (specifically for the last row of a floor where you may need to rip the entire length of a board
Answer:	The 20V batteries come in Amp ratings. 2 Amps, 4 Amps, 5 Amps, 6 Amps. For more powerful tools like the Chainsaw, or Leaf Blower or Sawzall Recip Saw, you need 5 Amps and up. Therefore, while you could use any 20V battery, it would drain too fast and damage the battery. The reason the smaller 2 Amp batteries are useful is because they are lighter and you have less hand fatigue using smaller power tools like drill and impact driver. They do fine with 2 amp batteries.
Question:	Is there a dust collection hookup? How much mess does it make
Answer:	Works amazingly well. Cut a tree with about a 16" diameter into pieces. Great saw. Will never buy gas again. (Even after rebuilding carb and replacing feul lines and filter my gas saw gave me troubles)
Question:	How well will this saw cut waterproof vinyl flooring? Is there a special blade I would need
Answer:	The chain is pre sharpened. I also improved mine by using a 14" oregon bar and chain with a guage of 0.50 instead of the 0.43 guage. This saw is powerful enough to use a 14" bar and the 0.50 guage seems to cut much faster.

Product features

Lightweight Design

Easy to transport and use at any project location.

Cross, Miter and Rip Cuts

Cuts through solid hardwood, engineered and laminate flooring.

Miter Gauge

Detents at 0°, 22.5° and 45°, giving flexibility for different types of cuts.

Die Cast Aluminum Miter and Rip Fence

Sturdy, stable and durable miter and rip fence.

More About This Product

• Amperage: 7.0
• Rating: 120V
• No Load RPM: 11,000
• Blade Diameter: 4.375”
• Miter Angle Range: 0°, 22.5° and 45°
• Weight: 24 lbs.

Product description

SKIL 3540-02 7" Wet Tile Saw complete tiling projects easily with the model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Skil 3540-02 7" Wet Tile Saw features: Stainless steel table top is resistant to corrosion adjustable rip fence with miter gauge for accurate straight and miter cuts 0-45 degree level for a wide range of cuts blade cooling water reservoir to keep blade cool and minimize dust and debris 7" diamond blade for fast and smooth cutting SKIL 3540-02 7" Wet Tile Saw specifications: Amperage: 4.2 Arbor Size: 5/8" Bevel angle range: 0-45 degrees Bevel Stops: 0 Degrees, 45 Degrees Blade Diameter: 7" Depth of Cut at 45 Deg. : 1" Depth of Cut at 90 Deg. : 1-3/8" Length: 14" Name: 3540 (S12) No load RPM: 3600 Voltage: 120V AC only weight (lbs. ): 18 Width: 13.25."

From the Manufacturer

Skil benchtop power tools are quality tools at a great price!

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

User questions & answers

Question:	this saw comes w/a diamond blade. would it be good enough to cut little glass mosaic tiles or should I order a different diamond blade
Answer:	The blade will cut through the glass tiles just fine, however, I would suggest purchasing a thinner more durable blade. I purchased a Ridgid 7" blade from Home Depot. The Ridgid blade make cleaner cuts and wastes less material because it is a thinner blade.Also, Skil just came out with a new updated model of this saw. I would suggest purchasing that saw instead because it has some much needed improvements. Here is some information on the new saw: https://www.skiltools.com/Tools/Pages/ProductDetail.aspx?model=3550-01.
Question:	What is the biggest size of tile this saw can be used for to do diagonal cuts
Answer:	am sure you can cut even 24x24 in. tile. to cut straight get 1x1x 20--24 in, wood and clamp under the table as your guide to cut straight,hope this will help. skil power tools are great and cheaper than MK
Question:	Would this be a good saw to cut rocks in half
Answer:	Depends on the size of the rock. The material is not an issue -- I use it to cut agates and quartz up to a couple inches in size. The important thing is to go slow and make sure to keep the cut wet.
Question:	Will this saw cut peanut brittle? We are currently struggling with the batch we just made and we need to find a good way to cut it
Answer:	i'M SORRY, BUT NO THIS WILL NOT CUT THE BRITTLE. this saw was designed for tile, brick and old tootsie rolls only. the reason tht is, the hamsters in the the motor are allergic to peanuts and a few other foods. seeing as how we all love fluffy hamsters, they gave them work instead of turning them away( that and hamsters have a ton of kids!!). the saw you are looking for has gophers in the drive motor( 2 x's the power for those thick piece's of brittle), that have been thoroughly screened for any deadly allergies to tree nuts and dairy, not to mention sock puppets and shoe polish as well. i do suggest that if you are going to buy the gopher powered brittle slicer 3000xlr made by Skill'dG( skilled gophers), to make sure you are getting the real thing, and not a cheap australian clone. contact the gopher union work force development office and they will give you a list of all non gopher supported and wallaby knock offs and a wallet sized card for easy recognition of their branded products. They may ask for a donation, but it's well worth the $120 to join their non members club. You get free holes in your green, and much, much more. Good luck on your quest, and may the spork be with you.

Product features

Stainless Steel Table Top

A stainless steel top will resist corrosion after multiple uses.

Adjustable Rip Fence with Miter Gauge

The adjustable rip fence with miter gauge will allow you to make accurate and straight miter cuts.

Bevel Cuts Tile

For more intricate designs or to tackle those end pieces, the 0-45 degree bevel will provide flexibility for various cut types.

Blade Cooling Water Reservoir

The constant flow of water keeps blade for overheating and helps minimize dust and debris while cutting tile.

More About This Product

• Amperage: 4.2
• Rating: 120V AC Only
• No Load RPM: 3,600
• Blade Diameter: 7 In.
• Miter Angle: 0-45 Degrees
• Bevel Positive Stop at: 0, 45 Degrees

Product description

The lightest worm drive continues the long tradition of SKILSAW quality, rugged durability and consistently exceptional cutting performance. Weighing in at just 11.5 lbs., it’s the lightest worm drive saw on the market. The rugged magnesium housing stays strong but keeps the motor cooler, giving you powerful performance job after job. Legendary SKILSAW worm drive technology meets our best-in-class Dual-Field motor, invented specifically for saws. This model even comes with a SKILSAW blade, just to make sure your SKILSAW is tough as nails right out of the box.

• Lightest magnesium construction reduces user fatigue for less down time
• Cut-ready depth of cut system helps with quick, accurate depth measurements
• 53° bevel allows users to complete a wider variety of cuts
• 15 Amp of power gives users the power to rip through more lumber in less time
• The anti-snag lower guard provides smooth operation for small cut-off pieces

User questions & answers

Question:	I read a user's review that stated this saw has a three-pronged twist-lock power connector. Is this true? Can't find any other reference to this
Answer:	3" Pin End Hobby Blades measure 2-3/4" between pins and are available with regular or skip teeth. They are used on Dremel MotoSaw-(the older models), Sears Craftsman Hobby Scroll Saw, Delta 15", Hobby Scroll Saw and Emco Lux Hobby Saw to cut wood, plastic and thin mild metals and provide a medium smooth finish. Blister card packed half-dozens available in 15TPI or 18.5TPI. (25TPI 3" Pin End Hobby Blades available in 12-pack or by the gross) FR42901 — FR43001
Question:	Is there a lot of kickback when you first engage it
Answer:	115/230V, Single Phase (prewired 115V)
Question:	Where are they made
Answer:	I don't know. I have a jet 2244 plus sander not a jet 60-321
Question:	what does this saw weigh
Answer:	yes

Product description

This zero clearance insert plate will fit snugly around the blade to reduce the risk of thin off-cuts getting wedges, it is a must have for precision wood cuts! Designed for SPT99 and SPT70WT.

• For precision cuts at 90°
• Reduces kerf clearance to thickness of blade
• Designed for SPT99 and SPT70WT
• Item Package Dimension: 13.98" L x 0.41" W x 4.53" H

User questions & answers

Question:	Is this insert Spt99-11 compatible
Answer:	Hello, This insert is compatible with the SPT99. Thank you for your inquiry!
Question:	Is this compatible with spt99-12? 10 inch blade
Answer:	Hello, Yes this accessory is compatible with SPT99. Thank you for your inquiry!
Question:	Does this fit the 8 1/4" spt99t as well
Answer:	Hello, This is not compatible as the zero clearance insert that the SPT99T uses is the following, SPT5004-ZC. Thank you for your inquiry!
Question:	Does this fit the TS
Answer:	Hello, This insert is not compatible with the TS6307. Thank you for your inquiry!

Product description

Use this insert to increase precision as well as safety without sacrificing an ounce of performance. Designed For SPT99.

• For use with stackable dado
• Dado blade up to 13/16 in.
• Includes dado cutter insert; combination WASHER
• Designed for Spt99

User questions & answers

Question:	What saws will it fit will it fit
Answer:	Comes with cord to plug into lighter
Question:	Will this fit the
Answer:	Yes
Question:	What is product made of
Answer:	When you enter in a destination you will have an option to choose from 3 different calculated routes. If you are wanting to create a custom route to go down specific roads, there is a Trip Planner feature built into the device which will allow you to insert shaping points along a road to take a specific route.
Question:	Will this work with the spt99t-01 table saw
Answer:	All of these units have battery back up so you can never directly plug these into 110v. Any 2 amp cell phone/laptop chargers work or the provided 12v car adapter/charger. It also comes with a USB cord.

• ➤Patented Metal Handle Design, Release Your Hands!
• ➤METAL HANDLE & LASER DESIGN: Comes with a unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. The laser guide ensures a professional and precise cutting line, convenient for cutting.
• ➤POWERFUL MOTOR & 6 BLADES: Features a 5. 8 Amps copper motor to deliver full-size performance at 3, 500 rpm, making cut wood, plastics, plaster board, PVC pipe, tile with ease. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
• ➤FLEXIBLE 90° & 45° BEVEL CUTTING: Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42. 9mm) at 90°; The bevel capacity at 45° is 1-3/8 inches (34. 9mm), you can decide your bevel cutting angle freely from 0° to 45°. Left-sided blade design for great cut-line visibility. A parallel guide attachment ensures straight, precise cuts easily and quickly.
• ➤SAFETY DESIGN & ERGONOMIC DESIGN: The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Motor postposition separates the front and rear gravity, promises a stable operation; Optimized ergonomic slim grip provides ease and less fatigue to one-handed operation.
• ➤VALUABLE ACCESSORIES: You will get: 1XTacklife TCS115A circular saw; 6 blades(2x120mm for wood cuts/2x115mm for wood and soft metal cuts/2x115mm for tile cuts); 1Xmetal handle; 1Xparallel guide; 1Xelbow dust port; 1Xhex key; user manual

Product features

TACKLIFE TCS115A 5.8A/710W Mini Circular Saw with Auxiliary Metal Handle, Laser Guide, 6 Blades

• Innovative auxiliary handle patent design is ideal for reduce the fatigue of one-handed operation, providing extra stability when cutting metal, ceramic tiles, etc.
• 710 W /5.8 A pure copper motor delivers 3500RPM running power to the compact circular saw for efficient cutting performance
• Adjustable cutting angle ( 90°- 45° ), max cutting depth at 90° is 1-11/16 inches (42.9mm) and the bevel capacity at 45° is 1-3/8 inches ( 34.9mm )
• Under the laser guide, the mini circular saw ensures a professional and precise cutting line for cutting wood/plastic/metal/tile
• With the adapter, it’s convenient to connect the dust port to your vacuum cleaner, ideal for maximizing dust collection efficiency to maintain a clean environment
• The rip guide is ideal for a parallel cuts with ease

Practical 6 Blades

TCS115A circular saw supply extra 6 blades for cutting different materials, such as wood, plastic, soft metal and tile. Compatible with most of the 4-1/2" and 4-3/4" blades in the market

Laser Guide

The laser guide ensures you a professional and precise cutting without any other tools. Red light enhances the visibility when you operate in dim environment

Depth Adjustment

Depth adjustment lever controls cutting depth, maximum cutting depth is 1-11/16 inches(42. 9mm) at 90° and 1-3/8 inches (34. 9mm) at 45°

Double Protection Switch

Only when you press the on/off trigger and safety switch simultaneously, can the saw start and move, thus protecting your safety

• This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
• Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
• The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
• Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
• The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

Product features

Keep your fingers out of harms way...

This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Orange for Safety

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

Why pay more?

• The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
• Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
• The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

Keeping Your Distance Is Key

This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications. Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly where there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location. The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process. Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again. The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

Durable and Built to Last!

Each device in this set is made from a super durable polymer plastic to stand up to everyday use. They are almost indestructible! Each of the blocks with foam pads are designed to grip the material. If they become built up with dust and debris, clean them with warm soapy water and let them dry for at least 24 hours before using them again.

Product description

Description

Are you finding the professional table saw that solves all your wood cutting needs?

This compact 10" table saw delivers 5000RPM cutting performance, perfect to rip through all kinds of wood material. And the double bevel cutting from 0-45° offers max cut depth is 3'' at 90°and 2-1/2" at 45°. And it can be lifted up and down to different needs. And the sliding miter gauge adjusted from-45° to 45° matches with self-aligning rip fence offers the precise and stable cutting. Table coating reduces friction for smoother cutting.



Note: During installation, don’t forget to check if there are any spare parts left in the package foam.



Feature

15 amp motor delivers 5000 RPM for powerful cutting performance

26 in. L x 19 in. W heavy duty coated aluminum tabletop

Tool free guard and riving knife, protects you from accidental hurt and flying chips

Two position detachable rip fence for narrow rip cuts and material support

Adjustable miter gauge, 45° left and right for accurate cross cuts

Cross cut at 90°--3" and bevel cut at 45°--2-1/2"

Adjustable blade height for slotting, ripping or cutting

Self-aligning rip fence with parallel guide for precise and stable cutting

On-board storage system for wrench and push stick when not in use

On/off safety switch provide overload protection



Specification

Material: Steel, Aluminum, PP

Overall Dimension(with Stand) : 26” x 19”x35” (L x W x H)

Net Weight: 46 lbs

Voltage: 120 V / 60Hz

Speed: 5000RPM+/- 10%

Package Includes: 1x Table Saw, 1x 10” Saw blade, 1x Miter Gauge, 1x Push Stick, 1x Parallel Guide, 1x Rip Fence, 1x Protection Guard, 2x Wrenches, 1x User Manual

• 【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty stand effectively prevents table from rollover during cutting.
• 【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. 36T carbide-tipped blade with transparent guard and riving knife protects you from accidental hurt and flying chips.
• 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And there’s a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting.
• 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling.
• 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control and provide overload protection. And it can be used without the stand which is convenient for outdoor wood cutting.