12 best corcular saw

Product description

For the more experienced user who needs a powerful circular saw with advanced features, the SKIL 5280 7-1/4 inch circular saw is the saw for the job. The 15-Amp motor has the power and performance you need to quickly cut lumber and sheet goods for a room addition, deck and more. The single-beam laser guides cuts with increased accuracy, while the integrated dust blower keeps the line of cut sawdust free. The 51 degree bevel, with positive stop at 45 degrees, gives a variety of cut options, while blades changes are easier with spindle lock and on-tool wrench.

• Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
• 7-1/4-inch carbide-tipped blade included. Spindle lock for easy blade changes.
• 51 degree bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
• Lightweight 6.95-pounds design reduces fatigue
• Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs

User questions & answers

Question:	I am building a panel saw and need a circular saw with an auto on switch. Does this saw have that ability
Answer:	use the switch at the power plug and zip tie it the trigger.
Question:	What is the wattage
Answer:	With an AC motor you can't calculate the wattage by multiplying the voltage by the current (amperage). I won't get into a technical explanation but the peaks in the AC current are delayed from the peaks in the AC voltage. The wattage is equal to the volts X amps X a power factor, which is always less than one. That said, the wattage is really only of interest with respect to how much electricity your're billed for. You need to consider the current to determine whether you are overloading your wiring. The 15 amp specification would be when it reaches it's maximum load. I haven't measured this saw but my 15-amp rated table saw draws 8 amps with no load. I don't really have the means to measure it safely at full load.
Question:	Can the laser be adjusted by the user if it doesn't line up out of the box
Answer:	There is an adjuster toward the back of the laser- a 3/32 allen key can adjust it left or right. Mine moved a bit, probably from the vibration of the saw. I was able to easily adjust it back to straight.
Question:	Does this cut accurately? I bought a cheaper Skil and the cut was off by 1/4" at the base. The laser was off the same too
Answer:	I made some straight cuts in 2" x 4" s and the laser was right on.

Product features

Single Beam Laser

Use laser to guide straight cuts.

Indicator Light

Know when the saw is powered on.

Dust Blower

Keeps line of cut free of sawdust for accurate cuts.

Guarded Trigger

Minimizes accidental start up.

More About This Product

• Includes a 24-tooth carbide blade and carrying bag.
• 15 Amps, 5,300 RPM
• Depth of cut at 2-3/8 in.
• 51 degree bevel with positive stops at 45 degrees.
• Spindle lock for easy blade changes using the on-tool wrench.

Product description

• Imported from: China
• POWER TOOLS
• Commercial Brand: DEWALT
• Lightweight and compact 8.8-Pound
• Electric Brake
• Patented 15-Amp motor
• 57-Degree beveling capacity with positive stops at 45-Degree and 22.5-Degree
• Integrated Dust blower

User questions & answers

Question:	Is there a cut depth adjustment? No mention of one
Answer:	It has an adjustable depth of up to 2-9/16 inches. This saw is also a lot quieter than I expected.
Question:	Will it wash the dishes
Answer:	Does help make quick work of my honey-do list. I'm in the shop, cutting trim for new cabinets. Grateful spouse is in the kitchen, scrubbing the plates and the skillet. So, yes?
Question:	For those who have used this with a speed square or homemade fence on the left side of the handle, does the motor get in the way
Answer:	Late answer but I have to correct the previous answer. A speed square does not get in the way if you put the fat side of the square on the top of the board you are cutting. This let's the saw finish cutting before the motor reaches the top of the square.
Question:	What material is the blade made of
Answer:	100% gluten-free steel with carbide tip teeth. And 0.1% yellow paint.

Product features

DEWALT 7-1/4-Inch Circular Saw with Electric Brake

With just 8.8 lbs weight, the Dewalt 7-1/4-Inch Circular Saw is light and hence, easy to hold and use. As the saw weighs so less, it gives you the flexibility to maneuver it the way you want getting the toughest job done within minutes. Use it as long as you want, your hands won’t feel a thing and the ergonomic design also makes sure that you get the best finishing post cut.

Power through the toughest tasks like a pro

DEWALT Circular Saw has a 15amp motor that helps you power through the tough wood work task without demanding much manual effort. As the cutting and sawing wood requires a lot of strength, with such a saw you can focus on the finishing rather than worrying about how much time and strength would the job require.

Once the job is done, you do not have to worry about manually switching off the saw. The electric brake stops the blade once the trigger is released.

Perfect Cut, everytime

To ensure that you do not spend much time in getting that perfect cut, the saw comes with an Aluminum smooth base that keeps the saw levelled, minimizing the disturbance during movement.

Integrated parts to ensure ease of usage and durability

It also comes with a specially designed Ball bearing lower guard that provides protection to the equipment and is constructed to withstand harsh conditions. Also, the saw has an inbuilt dust blower that ensures clear line of sight by blowing off dust particles away while cutting.

The On-board blade Wrench Storage provides the much needed storage solution of the blades. When the blades are stacked in specific sections it doesn’t only de-clutters the workspace where the cutting is happening, but also provides ease of locating specific blades at the time of need.

Product description

The BLACK+DECKER BDECS300C 13amp Circular Saw with Laser features 13 amp power to completes a wide variety of cuts. It has a laser guide for accurate cutting, with easy to use bevel and depth adjustments. A spindle lock provides easy blade changes. This circular saw offers a lightweight design to reduce user fatigue and complete your job! Backed by BLACK+DECKER's 2 year limited warranty. Includes:.1) Circular Saw, 1) 7-1/4” Circ Saw Blade, 1) Hex Key

• Spindle lock for easy blade changes
• This product is manufactured in China
• This product meets customer requirement
• Included Components: Circular saw blade, Wrench

User questions & answers

Question:	Is the Laser powered by the cord or batteries
Answer:	The Laser is powered by the cord.
Question:	What is the depth of cut at
Answer:	Depth adjust to 2.5" at 90⁰.
Question:	So this one have a cord
Answer:	Yes it has a cord it a nise saw work great
Question:	Does this come with a case
Answer:	No, unfortunately it does not come with a case or even a tote.

Product description

The DEWALT DCS391B 20V MAX 6-1/2" Circular Saw features a powerful 460 MWO, 5150 RPM motor that delivers power and speed to make the most demanding cuts with ease. A high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy, and an optimized rubber over-molded comfort grip delivers optimal balance and control. The 0 Degree-50 Degree bevel capacity allows for aggressive bevel cuts for a multitude of applications, along with the 6-1/2" carbide tipped blade for cutting 2x material at 90-Degree and 45-Degree and more cuts per charge. No load speed: 5150 rpm, Arbor size: 5/8", Depth of cut at 45-Degree: 1-5/8", Depth of cut at 90-Degree: 2-1/8". Includes: DCS391 6-1/2" Circular Saw, 6-1/2" Carbide-tipped Blade. This is a bare tool item (battery sold separately).

• High strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy
• 0-50°(degree) bevel capacity allows for aggressive bevel cuts for a multitude of applications
• Optimized rubber over-molded comfort grip delivers optimal balance and control; Power Tool Type: Cordless
• 6.5-Inch carbide-tipped blade for cutting 2 times material at 90° and 45° and more cuts per charge
• Includes: DCS391 6.5-Inch Circular Saw and 6-.5-Inch Carbide-tipped Blade
• Battery & Charger Sold Separately

User questions & answers

Question:	Will any 20v battery work for this including the XR one
Answer:	The label says: Carefully manufactured by Solgar Inc, Leania , NJ. 1-877-SOLGAR 4 as a Label says Leania ,NJ. 1-877-Solgar4
Question:	Which hard case is sold to protect and store this saw
Answer:	I don't know whether genetically modified products were used to derive the vegetable cellulose. The supplement is gluten, wheat and dairy free but that does not answer the person's question.
Question:	I have this saw and need to cut a 6ft piece of Caesarstone. Is there a blade that would work with this saw to cut my stone
Answer:	You can open the capsule yes.
Question:	Will the De Walt batteries 20V Max lithium ion 1.5 ah and charger i have for my drill set work with this
Answer:	Ester-C raw material is distributed in the US by The Ester C Company located in NY State. It's essentially a front and, I think, it employs just 4 people. Raw material is owned and supplied to The Ester C Company by the Chinese concern Jiangsu Aoxin Biotechnology Co Ltd. I believe all Ester C anywhere is sourced through them as they own the patent. I also believe that its quality is quite good and reliable. I do not know where Soplgar conducts the final assemblage, so to say. Probably in the US. Howevr, again - all Ester C raw is sourced from China.

• ➤Patented Metal Handle Design, Release Your Hands! Ideal Valentine's Day Gift!
• METAL HANDLE& LASER DESIGN: Comes with a unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. And laser guide allows you to make more precise cuts. It makes a great saw for DIY-ers.
• POWERFUL MOTOR & 6 BLADES: Features a 5. 8 Amps copper motor to deliver full-size performance at 3500 rpm, it has enough power to do most of the things larger saws can do, with way less hassle. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
• FLEXIBLE 90° & 45° BEVEL CUTTING: Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42. 9mm) at 90°; The bevel capacity at 45° is 1-3/8 inches (34. 9mm), you can decide your bevel cutting angle freely from 0° to 45°. Left-sided blade design for great cut-line visibility. Left-sided blade optimization gives you a clear line of sight on anything you’re cutting.
• SAFETY DESIGN & ERGONOMIC DESIGN: The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Motor postposition separates the front and rear gravity, promises a stable operation; Optimized ergonomic slim grip provides ease and less fatigue to one-handed operation.The dust port allows you to hook up your shop vac so make the working environment cleaner.
• YOU WILL GET: 1XTacklife TCS115A circular saw; 6 blades(2x120mm for wood cuts/2x115mm for wood and soft metal cuts/2x115mm for tile cuts); 1Xmetal handle; 1Xparallel guide; 1Xelbow dust port; 1Xhex key; user manual.

Product features

TACKLIFE Circular Saw with Unique Metal Handle, 6 Blades - TCS115A (Orange)

Provide 710W/5.8A powerful power and 3500rpm rotation speed. Not only can it be equipped with a straight cutting function, but it can also be cut at an angle of 0~45° to the left. Comes with 6 Blades with excellent durability. Cutting depth and angle can be adjusted. The maximum cutting depth of 90° is 1-11/16 inches (42.9mm), and the maximum cutting depth of 45° inclination angle is 1-3/8 inches (34.9mm).

Laser guide & compact: equipped with a laser guide, ensuring accurate cuts.

The left-wing saw blade design helps you see the cutting line, the motor is at the rear, and the front and rear center of gravity are separated, and the front and rear balance is good. The slim inner grip design provides high comfort, balance, and control.

Angle Adjustment

Angle Adjustment

The cutting angle and depth can be adjusted. The maximum cutting depth of 90° is 1-11/16 inches (42.9mm), and the maximum cutting depth of 45° inclination angle is 1-3/8 inches (34.9mm).

Excellent 6 Blades

Extra 6 blades for cutting different materials. 24T blades cuts for wood, plastic..60T blades cuts for soft metal.Diamond blades cuts for tile. Compatible with most of the 4-1/2" and 4-3/4" blades in the market. A Mini Circular Saw can be multi-purpose.

Excellent Designs

Laser guide ensures quick straight cuts. The cutting depth can be adjusted. Double switch design, safe to use. Only when you press the on/off trigger and safety switch simultaneously, can the saw start and move.

Product description

The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts. The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; As well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. The 5007MG includes a Makita 7-1/4” Premium Ultra-Coated Framing Blade with Advance Tooth Design. The "M" shaped tooth design features a two-pointed tip and two 10 degree bevel face to maximize cutting performance for a faster, cleaner and longer lasting cut. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is also ultra-coated to reduce heat and pitch build-up for faster, smoother cutting, with special Makita heat vents strategically set to dissipate heat and increase performance.

The Makita 7-1/4-Inch Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market.

• Magnesium components create a lightweight saw (10.6 pounds) that is well balanced and jobsite tough
• Powerful 15.0 AMP motor delivers 5,800 RPM for proven performance and jobsite durability
• Two built in L.E.D lights illuminate the line of cut for increased accuracy
• Large cutting capacity (2 to 1/2 inches at 90 degree) and bevel capacity (0 degree to 56 degree) with positive stops at 22.5 degree and 45 degree
• 1 year warranty

User questions & answers

Question:	Has anyone found a way to hook up a shop vac/dust collector to this
Answer:	This was the only disappointing aspect of buying this saw. I can't believe the way the exit for the dust is blocked by the guard handle. Really frustrating.
Question:	What is the cylindrical object that slides along the power cord for
Answer:	It supports the power cord from sharp bending and cracking of insulation around the wire and it also keeps the cord from pulling out of the saw!
Question:	Does it come with a case
Answer:	how can i get just the case for a makita 5007mg saw. if i can send a part no. an i will order it. send me a gmail back at robert. [email protected] thanks
Question:	Magnesium is flammable. It scares me that this circular saw is made of a flammable material. Has this circular saw caught fire on anyone
Answer:	Solid magnesium ignites at around 950°F. If the temperature in the vicinity of your saw is approaching a thousand degrees, you have bigger problems than worrying about your saw housing catching fire.

Product features

Makita 5007MG 7-1/4" Magnesium Circular Saw

The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.

Well-Balanced and Jobsite Tough

The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting.

Magnesium

Framers and carpenters need cutting solutions with power and performance - not extra weight. Makita circular saws with Magnesium components are engineered for less weight with superior balance and durability. Magnesium circular saws deliver consistent performance with less weight for cutting sheet and dimensional lumber.

Product description

The DEWALT DWE575 7-1/4 in. Lightweight Circular Saw is among one of the lightest saws in its class at 8.8 lbs. This electric circular saw has a 57 Degree beveling capacity with stops at 45 Degrees and 22.5 Degrees. It's clear line of sight aids in blade visibility from any angle and it 15-Amp motor is powerful enough for even the toughest applications.

• MORE POWER: Features a 15 Amp motor powerful enough for even the toughest applications
• IMPROVED VISIBILITY: It's clear line of sight aids in blade visibility from any angle
• SMOOTH GUARD OPERATION: Anti-snag, ball-bearing lower guard for smooth guard operation
• REDUCE CORD PULL OUTS: Tough cord provides longer durability against cord pull outs
• LIGHTWEIGHT: Among one of the lightest saws in its class at 8.8 lbs.
• Among one of the lightest saws in its class at 8.8-Pound
• 15-Amp motor, powerful enough for even the toughest applications
• 57-Degree beveling capacity with stops at 45-Degree and 22.5-Degree

User questions & answers

Question:	Is there a hard case for this saw
Answer:	There is no hard case for the DWE575.
Question:	This saw has depth blade adjustable
Answer:	Yes, DWE575 has depth adjustment.
Question:	What is the tooth count on the blade the caw comes with
Answer:	It's not 40. Picture clearly shows 18 teeth, which I believe is probably accurate. It definitely wouldn't be more than 24.
Question:	What volt is DWE575 200 volts or 110 volts? Need a 220 volts
Answer:	Plugs in to 110 outlet

Product features

DEWALT DWE575 7-1/4-Inch Lightweight Circular Saw

The DWE575 7-1/4" Lightweight Circular Saw is among the lightest saws in its class at only 8.8 lbs. 15 Amp motor is powerful enough for the toughest applications. Bevel capacity of 57° and 2-9/16" depth of cut capacity provide versatility.

• ➤Patented Metal Handle Design, Release Your Hands!
• ➤METAL HANDLE & LASER DESIGN: Comes with a unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. The laser guide ensures a professional and precise cutting line, convenient for cutting.
• ➤POWERFUL MOTOR & 6 BLADES: Features a 5. 8 Amps copper motor to deliver full-size performance at 3, 500 rpm, making cut wood, plastics, plaster board, PVC pipe, tile with ease. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
• ➤FLEXIBLE 90° & 45° BEVEL CUTTING: Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42. 9mm) at 90°; The bevel capacity at 45° is 1-3/8 inches (34. 9mm), you can decide your bevel cutting angle freely from 0° to 45°. Left-sided blade design for great cut-line visibility. A parallel guide attachment ensures straight, precise cuts easily and quickly.
• ➤SAFETY DESIGN & ERGONOMIC DESIGN: The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Motor postposition separates the front and rear gravity, promises a stable operation; Optimized ergonomic slim grip provides ease and less fatigue to one-handed operation.
• ➤VALUABLE ACCESSORIES: You will get: 1XTacklife TCS115A circular saw; 6 blades(2x120mm for wood cuts/2x115mm for wood and soft metal cuts/2x115mm for tile cuts); 1Xmetal handle; 1Xparallel guide; 1Xelbow dust port; 1Xhex key; user manual

Product features

TACKLIFE TCS115A 5.8A/710W Mini Circular Saw with Auxiliary Metal Handle, Laser Guide, 6 Blades

• Innovative auxiliary handle patent design is ideal for reduce the fatigue of one-handed operation, providing extra stability when cutting metal, ceramic tiles, etc.
• 710 W /5.8 A pure copper motor delivers 3500RPM running power to the compact circular saw for efficient cutting performance
• Adjustable cutting angle ( 90°- 45° ), max cutting depth at 90° is 1-11/16 inches (42.9mm) and the bevel capacity at 45° is 1-3/8 inches ( 34.9mm )
• Under the laser guide, the mini circular saw ensures a professional and precise cutting line for cutting wood/plastic/metal/tile
• With the adapter, it’s convenient to connect the dust port to your vacuum cleaner, ideal for maximizing dust collection efficiency to maintain a clean environment
• The rip guide is ideal for a parallel cuts with ease

Practical 6 Blades

TCS115A circular saw supply extra 6 blades for cutting different materials, such as wood, plastic, soft metal and tile. Compatible with most of the 4-1/2" and 4-3/4" blades in the market

Laser Guide

The laser guide ensures you a professional and precise cutting without any other tools. Red light enhances the visibility when you operate in dim environment

Depth Adjustment

Depth adjustment lever controls cutting depth, maximum cutting depth is 1-11/16 inches(42. 9mm) at 90° and 1-3/8 inches (34. 9mm) at 45°

Double Protection Switch

Only when you press the on/off trigger and safety switch simultaneously, can the saw start and move, thus protecting your safety

Product description

Combining performance and versatility, the 20V MAX 6-1/2 in. Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provide a max depth of cut of 2-1/8 in. at 90° along with a max bevel of 50°. This saw is equipped with a built-in rafter hook, bright LED, and optional dust chute. Battery and charger sold separately.

• POWERFUL AND EFFICIENT brushless motor provides optimal cutting performance in a variety of materials
• HIGH MANEUVERABILITY with its lightweight and compact design
• QUICKLY ADJUST the bevel capacity from 0 - 50° with the tool-free bevel lever
• CONVENIENT STORAGE on the jobsite with the built-in rafter hook
• ADDED SAFETY: Electric brake quickly stops the blade after the trigger is released

User questions & answers

Question:	What’s the difference between this and the XR model
Answer:	Hi Steve, The XR on tools means Brushless. DCS565B (B) bare tool/tool only. The XR on batteries are the same as MAX (extended runtime) Logo change.
Question:	Is this saw compatible with the Kreg Rip-Cut
Answer:	Don’t know. Check with Kreg or Rockler or Woodcraft
Question:	Will it accept 18v batteries
Answer:	18v batteries would not be compatible with this tool.
Question:	Will this saw good for ripping 2x4 wood. The engine looks bigger that old version
Answer:	The maximum cutting depth at a 90 degree angle is 2 1/8 and the maximum cutting depth at a 45 degree angle is 1 5/8. A 2x4's actual dimensions are 1 1/2 by 3 1/2 so it would be able to cut from a 90 degree or a 45 degree angle.
Question:	Can this be used to cut pasture fence boards
Answer:	Yes, the saw may be used to cut fence boards.
Question:	Where can you purchase a blade
Answer:	It comes with a blade, but you can also get one of Amazon. I got this one which works well. Oshlun SBW-055036 5-1/2-Inch 36 Tooth ATB Finishing and Trimming Saw Blade with 5/8-Inch Arbor (1/2-Inch and 10mm Bushings) https://www.amazon.com/dp/B00I527PGM/ref=cm_sw_r_cp_apa_l6ICAb7MR37T2
Question:	will it cut 2x4s
Answer:	Yes.
Question:	Can this saw make bevel cuts
Answer:	Yes, the shoe can be adjusted for bevel cuts

Product features

DEWALT 20V MAX Circular Saw, 6-1/2-Inch, Cordless, Tool Only (DCS565B)

Combining performance and versatility, the 20V MAX 6-1/2 in. Cordless Circular Saw is ready to take on a variety of cutting applications. It features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provide a max depth of cut of 2-1/8 in. at 90° along with a max bevel of 50°. This saw is equipped with a built-in rafter hook, bright LED, and optional dust chute. Battery and charger sold separately.

Features

• POWERFUL AND EFFICIENT brushless motor provides optimal cutting performance in a variety of materials
• HIGH MANEUVERABILITY with its lightweight and compact design
• QUICKLY ADJUST the bevel capacity from 0 - 50° with the tool-free bevel lever
• CONVENIENT STORAGE on the jobsite with the built-in rafter hook
• ADDED SAFETY: Electric brake quickly stops the blade after the trigger is released
• INCREASED VISIBILITY and cut accuracy with bright LED
• MINIMIZE DUST WHILE CUTTING with the optional dust chute, compatible with the DEWALT AirLock system or standard 35 mm dust extractor
• COMPATIBLE with all DEWALT 20V MAX and FLEXVOLT Batteries

Product description

This CRAFTSMAN 15 amp corded saw delivers the power needed to complete everyday tasks. The high performance 5, 500 RPM motor Is ideal for fast and aggressive cutting. Make accurate angled cuts with the 55 degree bevel capacity. This saw has a Spindle Lock mechanism for easy blade changes. With a premium grade magnesium shoe, metal upper and lower guard, This saw is made to withstand harsh jobsite conditions. The compact and lightweight design helps reduced fatigue while the contoured overmolded handle is optimized for comfort.

• High performance motor runs at 5, 500 RPM's for aggressive fast cutting
• 71/4inches 18T Carbide tipped blade with up to 21/8inches Capacity for 2x material
• Tool-free BEVELING shoe pivots up to 55 deg. For angled cuts with detents at 22.5 and 45 Degree for ease of use
• Magnesium shoe for durability and reduced weight
• Metal upper and lower guard for added durability
• Metal rafter hook for convenience
• Contoured overmolded handle for added comfort during use
• 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

User questions & answers

Question:	I just purchased it on Sep 17th, 2020. I am trying to loose the bevel adjustment level but it does not move at all. Is there a lock on the lever
Answer:	Yes it has a lever you pull up to loosen then when you have it where you want it push it down to lock
Question:	Does this saw come with an edge guide
Answer:	The unit CMES510 does not come with an edge guide
Question:	How long is the power cord
Answer:	Cord Length (Feet) = 8
Question:	Where is it made at
Answer:	This is made in China

• ➤Patented Metal Handle Design, Release Your Hands!
• METAL HANDLE& LASER DESIGN: Comes with a unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. And laser guide allows you to make more precise cuts. It makes a great saw for DIY-ers.
• POWERFUL MOTOR & 6 BLADES: Features a 5. 8 Amps copper motor to deliver full-size performance at 3500 rpm, it has enough power to do most of the things larger saws can do, with way less hassle. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
• FLEXIBLE 90° & 45° BEVEL CUTTING: Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42. 9mm) at 90°; The bevel capacity at 45° is 1-3/8 inches (34. 9mm), you can decide your bevel cutting angle freely from 0° to 45°. Left-sided blade design for great cut-line visibility. Left-sided blade optimization gives you a clear line of sight on anything you’re cutting.
• SAFETY DESIGN & ERGONOMIC DESIGN: The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Motor postposition separates the front and rear gravity, promises a stable operation; Optimized ergonomic slim grip provides ease and less fatigue to one-handed operation.The dust port allows you to hook up your shop vac so make the working environment cleaner.
• YOU WILL GET: 1X TCS115A circular saw; 6 blades(2x120mm for wood cuts/2x115mm for wood and soft metal cuts/2x115mm for tile cuts); 1Xmetal handle; 1Xparallel guide; 1Xelbow dust port; 1Xhex key; user manual.

Product features

Laser Guide & Metal Handle

Laser indicator makes the cutting line more straight. Patented metal handle design helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable.

Double Protection Switch

Left-sided blade optimization gives you a clear line of sight on anything you're cutting. The double protection switch prevents the machine from accidentally opening, promises a safer cutting job.

Dust Port

The dust port allows you to hook up your shop vac so make the working environment cleaner.

Durable 6 Blades

Durable 6 Blades: 2x24T TCT4-7/10inches(120mm) for wood cuts; 2x60T HSS 4-5/10inches(115mm) for wood and soft metal cuts; 2pcs grit diamond blade 4-5/10inches(115mm) for tile cuts, great for DIY projects around the house and your workshop.

Product description

This Brushless 4-1/2 in. Cordless circular saw (tool only) comes with one blade, rip fence, and dust port adaptor. The DCS571 features a bevel gear design allowing users to cut 2x material at 90 degrees and 1x material at 45 degrees. With convenient on-board blade key storage users can change blades with minimal hassle. Elongated handle optimizes reach for rip cutting OSB and plywood. Using a DCB205 battery, you can cut up to 339 linear feet of 3/4 in. Osb.

• Brushless motor allows you to cut up to 339 linear feet of 3/4 in. Osb using DCB205 battery (sold separately)
• Removable auxiliary handle for increased control
• Hang hook for increased convenience
• On-board blade key storage for hassle free blade changes
• 1-1/2 in. Finger trigger allows users to choke-up on tool if necessary for their application

User questions & answers

Question:	how many rpm is this
Answer:	4500 RPM
Question:	Where is it made? Thanks
Answer:	Don't know never looked . Been a builder all my life have every tool and just about every dewalt 20v 60 v. Works well good design for a small saw.
Question:	What's the part number for a compatible dust bag
Answer:	A dust port is included to connect to a vacuum. The port part number is N594300
Question:	What are the blade specs? We know its 4.5" but what is the center hole size
Answer:	3/8 arbor