13 best dewalt router tables

Product description

The DEWALT DW618PKB 2-1/4 HP EVS Fixed Base/Plunge Router Combo Kit with Soft Start is equipped with a 2-1/4 HP (maximum motor HP), 12.0 Amp electronic variable speed motor which provides the power to rout smoothly through the toughest hardwoods. Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque for enhanced control. The micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments & adjusts vertically for a constant switch/cordset location. An adjustable steel motor cam lock makes depth adjustment and base changes quick and solid-locking. Dust collection collects 95% of the dust and provides superior bit visibility. The precision machined brass bushings and case-hardened steel guide rods which provide a smooth and accurate plunge stroke. A spindle lock button allows for single-wrench bit changes. This unit features rubber overmolded handles and low center of gravity designed to provide best-in-class comfort, balance and control. It also offers a heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight. Self-releasing, long, eight slotted collets for better bit retention and elimination of frozen bits and the five position, adjustable turret stop assists in stepped or repeated plunge cuts. This unit also allows for micro-fine depth adjustment on plunge base 5/128" per turn for precise routing in veneer and inlays. Kit includes: DW618M motor pack, DW6184 fixed base, DW6182 plunge base, 1/4" and 1/2" collets, Wrench, Large hole sub base, Vacuum adapter and soft carry bag. Easy to reach plunge lever and switch for superior control while routing.

• 2-1/4 HP (maximum motor HP), 12.0 Amp electronic variable speed motor
• Electronic variable speed with full feedback control for constant speed under load from 8,000-24,000 rpm
• Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location
• Integral, through-the-column dust collection collects 95% of the dust and provides superior bit visibility
• Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking

User questions & answers

Question:	Will this router run on 220-240V power, or only
Answer:	The router requires 110V
Question:	is it made in usa or china
Answer:	No.....Mexico
Question:	What kind of router bits are good for this router ? Or are any compatible
Answer:	This router has both a 1/4" and 1/2" collet so it will accept both size shank bits. I prefer the buy 1/2" shank myself especially in larger bits, they are a little more expensive but seem to run better and last longer. When it comes to brands of router bit Freud is always the first place I shop. I have also had really good success with CMT and Bosch because my local big box store doesn't carry Freud. One thing I will saw about router bits is its always better to buy quality bits they will last for years and produce better results. Amazon has some nice bits sets that come with a lot of common bits that are nice for a person new to the router.
Question:	Can anyone explain the difference between this kit DW618PKB and the DW618PK kit? Are the routers / bases the same
Answer:	They are both the same tools. The only difference is that DW618PK includes a hard plastic case. Whereas, the DW618PKB includes a cloth carrying bag.

Product description

The DW618B3 2-1/4 HP Three Base Router Kit has a powerful motor for routing through tough hardwood at the user's desired speed. Comprises fixed, plunge and D-handle bases. Features precise depth adjustments and fast, easy motor pack removal for bit and base changes.

From the Manufacturer

DEWALT DW618B3 12 Amp 2-1/4 Horsepower Plunge Base and Fixed Base and

• 2-1/4 max horsepower, 12-amp electronic variable-speed motor provides power to rout smoothly through toughest hardwoods
• Full feedback control for constant speed under load from 8,000-24,000 rpm and soft start to reduce start-up torque for enhanced control
• D-handle incorporates trigger switch with lock-on feature
• Provides precise depth adjustments in 1/64-inch increments and adjusts vertically for constant switch/cordset location
• Integral through-the-column dust collection collects 95 percent of the dust and provides superior bit visibility

User questions & answers

Question:	What do the letters/numberrs after the dw618 stand for? i have looked at the k, pk, pkb & b3.... help
Answer:	Está a 6m de altura y alcanza 50m
Question:	Does anyone have a router table recommendation to couple with the Dewalt kit? I am going to be trimming out a porch and making alot of storm windows
Answer:	This device is not a modem so it does not matter what DOCSIS version your ISP requires you to have.
Question:	What is the purpose of the D-handle base
Answer:	Sure, We've done that.
Question:	wich router bit set use this one?? 1/4 or 1/2?? please help me with this
Answer:	The quick start guide tells you have to log into the router for the first time.

Product features

DEWALT DW618B3 12 Amp 2-1/4 Horsepower Plunge Base and Fixed Base

The DW618B3 2-1/4 HP Three Base Router Kit has a powerful motor for routing through tough hardwood at the user's desired speed. Comprises fixed, plunge and D-handle bases. Features precise depth adjustments and fast, easy motor pack removal for bit and base changes.

Product description

The 20V max XR Cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base Change.

• Dual LED lights help illuminate the work surface
• Depth adjustment ring allows for fast and easy height adjustments
• Electronic brake slows the motor down faster after the unit is shut off; Speed 16,000 to 25,500 rpm
• Variable speed dial allows the user to match speed of the router to the application
• Soft start motor with full time electronic feedback allows the motor to maintain speed during cuts

User questions & answers

Question:	What's the equivalent HP? 1.25 or greater
Answer:	1.25HP
Question:	which batteries work with this tool? are they compatible with any stanley / porter cable / black+decker batteries
Answer:	The DCW600B is compatible with the DEWALT 20V battery line. It is not compatible with any other Brand.
Question:	Can you use a flexvolt battery with this
Answer:	Yes. I tried it and works fine with flex volt batteries.
Question:	Can it use 1/4 in bits
Answer:	Yes, we recommend using only 1/4" bits with the DCW600B.

Product description

Featuring a 12 amp variable-speed, soft-start motor, the DEWALT 2-1/4-Inch Fixed-Base/Plunge-Base Router Combo Kit is packed with smart design features that make routing easy. Depth adjustment and base changes are tool free, and integrated dust control keeps work spaces clean and improves cut line visibility.

Featuring a 12 amp variable-speed, soft-start motor, the DEWALT 2-1/4-Inch Fixed-Base/Plunge-Base Router Combo Kit is packed with smart design features that make routing easy. Depth adjustment and base changes are tool free, and integrated dust control keeps work spaces clean and improves cut line visibility.

Powerful and Accurate with Variable-Speed Control

The 2-1/4-horsepower, 12 amp motor allows the router to cut through the toughest hardwoods. The router's electronic variable-speed trigger lets you select from between 8,000 and 24,000 rpm for specific applications. And because this system employs full electronic feedback, you can trust the router to provide constant speed under load. In addition, the motor's soft start reduces start-up torque for optimum control.

The router's fixed base features a micro-fine depth-adjustment ring that provides precise bit adjustments in 1/64-inch increments. Because the ring--not the motor can--turns to adjust bit depth, a constant switch/cordset location is maintained when you are using the router in a table. This minimizes difficulty in turning the unit on and off and keeps operation consistent.

The plunge base features an adjustable five-position turret stop for use when making repeated plunge cuts. The easy-to-reach plunge-release lever and switch keep control at your fingertips during routing.

Quick, Secure Base and Bit Changes

The clear, LEXAN sub-base offers optimum bit visibility and base durability, and it accepts standard template-guide bushings to make application-specific setups easy. Also, a sub-base concentricity gauge is included. If you insert this into the collet prior to bit installation, it will help you center the sub-base relative to bit location when making your cut line off of the side of the base.

Moreover, the sub-base and other included bases are designed to make both base and bit changes easy. Quick-release motor latches allow for fast and easy motor-pack removal, while a spindle-lock button allows for single-wrench bit changes. The fixed base also offers a flat top, so the router can be set upside down for easy bit and depth changes. Additionally, long, self-releasing, eight-slotted collets provide improved bit retention and prevent bits from jamming.

Built for Consistency and Durability

Routing applications produce a lot of dust, which can result in extra wear and tear on electronic parts. That's why this system features a dust-sealed switch that protects against dust ingestion for longer tool life. Other components that contribute to the tool's overall consistency and durability include heavy-duty metal housings, precision-machined brass bushings, and case-hardened steel guide rods on the plunge base.

Comfortable Operation with Integrated Dust Control

Each base features comfortable rubber over-molded handles and a low center of gravity for improved balance and control and reduced user fatigue. The base also has a patented through-the-column dust-collection system. This allows a vacuum to be attached to the router without blocking your line of sight.

In addition, this router kit offers you the ability to work with the switch and cordset on either your left or right side. Also contributing to this setup's usability is a detachable cordset that can be easily serviced. A shorty cord motor pack is not required if you opt to place the motor can in a D-Handle base.

The DW618PK DEWALT 2-1/4-Inch EVS Fixed Base/ Plunge Base Router Combo Kit with Soft Start is backed by a three-year limited warranty.

What's in the Box

DW618M motor pack, DW6184 fixed base, DW6182 plunge base, 1/4-inch and 1/2-inch collets, wrench, sub-base concentricity gauge, large-hole sub-base, vacuum adapter, and kit box.

From the Manufacturer

DEWALT DW618PK 12-Amp 2-1/4 Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets

• 2-1/4 hp, 12-amp electronic variable speed motor provides the power to rout smoothly through the toughest hardwoods
• Comes with 1/4-inch and 1/2-inch collets for improved versatility and bit retention
• Depth adjustment ring provides precise depth adjustments in 1/64-inch increments and adjusts vertically
• Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
• Integral, through-the-column dust collection collects 95% of the dust and provides superior bit visibility
• Item does not come with a centering tool

User questions & answers

Question:	What is the size of the box (kit box
Answer:	It’s a standard 1/2” anvil hog ring. You can buy replacements on amazon or your local snap on dealer truck
Question:	My husband wants a router he can attach upside down with a plate to his wooden workbench he built. Can this router do that? Do I need addl parts
Answer:	The head is stationary ..can not rotate
Question:	Does this model DW618 have the soft start feature
Answer:	It’s 415 ft lb. It has decent torque for what it is. Very handy in tight spots. 415 in lb would be about 35 ft lb so that’s no where near even a standard 1/2” impact torque range.
Question:	Is this router safe for mounting under a table? Will dust/chips fall into the motor assembly when it's operating upside down
Answer:	China but they are well made and have good power.

Product features

DEWALT 2-1/4 HP (max. motor HP) EVS Fixed Base / Plunge Router Combo Kit

The DW618PK 2-1/4 HP EVS Fixed Base / Plunge Router Combo Kit w/ Soft Start has a powerful motor for routing through tough hardwood at the user's desired speed. Features precise depth adjustments and fast, easy motor pack removal for bit and base changes. The plunge base integral dust collection provides superior bit visibility.

DW618M Motor Pack

DW6184 Fixed Base

DW6182 Plunge Base

Features and Benefits

- Quick-release motor latches for fast and easy motor pack removal for bit and base changes.

- Detachable cordset offers cordset serviceability and removes the need for a 'shorty' cord motor pack.

- Precision-machined brass bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke.

- Spindle lock button allows for single-wrench bit changes.

- Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.

- Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.

- Dust-Sealed Switch protects against dust ingestion for longer switch life.

Product description

The Bosch RA1181 bench top router table provides a large work surface for woodworking and routing. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its 2 1/2 inch dust collection port offers better dust collection for a cleaner work environment. The large aluminum top makes the table both durable and portable. This bench top router table includes mounting hardware, features a tall aluminum fence with adjustable MDF face plates, two out feed shims, and an aluminum router mounting plate. The starter pin and guard for router curved work pieces is also included, in addition to the built in cord wrap for convenient storage and portability.



Works with:



Bosch: 1613-Series and 1619EVS Plunge Routers; 1617-Series and MRF-Series Routers (in fixed base only)

Craftsman: Most Craftsman 1/2"-Collet Routers

DeWalt: DW616 and DW618 Routers (in fixed base only) Hitachi: M12VC Routers Makita: RF1100 and RF1101 Routers Milwaukee: 5615 and 5616 Routers Porter-Cable: 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router Ryobi: R161, R162, R163, RE170 and RE180 PL Routers Skil: 1810, 1815, 1820 and 1825 Routers Template Guides: The RA1181 does not accept any template guides. Vacuum Hoses: Common 2-1/2" Vacuum Hoses attach directly to the RA1181. Vacuum Hose Adapter for 35 mm Hoses, such as Bosch 35 Hoses: VAC004.

• Benchtop router table design – Features a large aluminum top for extended work area, durability and precision
• Rigid aluminum mounting plate – Pre-drilled for compatibility with a variety of routers and for above-table height adjustment
• Extra tall aluminum fence – Has adjustable faceplates and feather boards to maximize precision and versatility
• Dedicated standard dust-collection port – Fits standard 2-1/2 inch vacuum hoses for debris-free operation to help keep your work area clean
• Easy-to-use adjustable feather boards – Attach to fence and table, providing additional guidance and kickback protection
• Accessory slot – Accepts feather boards and 3/4 inch optional accessories such as a miter gauge
• Storage pocket – Allows storage of router accessories
• Cord-wrap storage – Stores 6 foot power cord

User questions & answers

Question:	can a router lift be attached
Answer:	As far as I can tell, the bundle includes everything, but the kit does not include the ring set. However, the ring set is available for $19.11, which makes adding it on to the kit cheaper than the bundle right now.
Question:	Would this work with a milwaukee 5616 router
Answer:	Yes you can buy the pre drilled router plate for that router
Question:	Can I mount this table to a different base? I want a router table that mounts on a taller stand, rather than a bench top unit
Answer:	quick look at the woodpecker top looks like the t tracks are to close together, and the jessum track size is proprietary.
Question:	can you provide list of routers that fit without modifications
Answer:	If the table width is 32 than yes.

Product features

Bosch RA1181 Benchtop Router Table

The Bosch RA1181 benchtop router table provides a large work surface for precision and versatility. The large aluminum top makes the table both durable and portable. Designed to fit a variety of routers, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. Its 2-1/2 In. dust-collection port offers better dust collection for a cleaner work environment. This benchtop router table includes mounting hardware, features a tall aluminum fence with adjustable MDF faceplates, two outfeed shims, and an aluminum router mounting plate. The starter pin and guard for routing curved workpieces is also included, in addition to the built-in cord wrap for convenient storage and portability.

Large Aluminum Top

For extended work area, durability, and precision.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Dust Collection Port

To help keep your work area clean.

Product description

The Bosch RA1141 Benchtop Router Table delivers ease of use plus stability, featuring an easy click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved work pieces, the starter pin and guard help support the work piece to allow easier control.

• Ultra-portable design – Features folding legs for fast setup and easy storage
• Easy click router mounting system – Provides easy bit changes and no leveling
• Laminated MDF top – Helps users make smooth and precise cuts
• Onboard storage – Ideal for holding router bits and spare parts
• No assembly required – Comes preassembled
• Tall fence with two adjustable feather boards – Helps to provide extra control and guide work
• Starter pin and guard – Allows easier control for routing curved work pieces
• Bistro-height gauge – Provides easier bit setup and enhanced cut precision

User questions & answers

Question:	Is the router included
Answer:	Router is not included
Question:	Its the same has a skil ras900, but with different color, any difference in quality ?i though bosh made stuff and not buy from seller and slap names
Answer:	I have the Skil 900 Router table along with the Skill Router. I had to purchase a new router ecosystem because my Skil Router would no longer hold it's depth settings. so I purchased the Bosch 1617 EVSPK Router Combo Kit and the Bosch Router Table RA1181with an additional Fixed base. When I was taking the Skil router table down I noticed a label on it which said Robert Bosch Company. My skil table quick release wasn't compatible with the Bosch Fixed base otherwise I probably would have used my Skil Router Table. I will say the Bosch Router table 1181 is much nicer. The MDF platform was ok except dust go in on the plastic edges and the edges separated from the table slightly. I'm a very light DIY type of person. If my Skil Router had a more robust/accurate depth guide I probably would still be using it.
Question:	I can see there is an on/off button on the table, do i have to stick with same electricity voltage of the router
Answer:	Yes, the router is designed to work with 120v, the router table has a on off switch which will need to be plug into a 110 outlet, when the router is inserted into the table , it is plugged into the outlet on the table, using voltage greater than 120v will burnout the brushes in your router.
Question:	The mounting plate is different as ra1181 or ra1171. i guess this item is for bosch only, right
Answer:	Hi! The Bosch RA1141 Portable Benchtop Router Table is compatible with the following routers: Bosch 1617-Series Routers (in fixed base only), Craftsman 17508, 17511, 17528, 17533, 17541, 17542, 26620, 26834, 28190, and 73277 Routers, DeWalt DW616 and DW618 Routers (in fixed base only), Hitachi M12VC Routers, Makita RF1100 and RF1101 Routers, Milwaukee 5615 and 5616 Routers, Porter-Cable 690-Series and 892-895-Series Routers (in fixed bases only) and 7529 Plunge Router, Ryobi R163K Router, and Skil 1810, 1815, 1820 and 1825 Routers. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch RA1141 Portable Jobsite Router Table

The Bosch RA1141 Portable Jobsite Router Table delivers ease of use plus stability, featuring an Easy Click router mount that attaches and detaches in seconds, with no leveling required. It has a smooth laminated MDF top, plus it has adjustable laminated MDF face plates for better support. The tall fence handles taller stock, and dual feather boards provide additional control while feeding stock across the table. There’s a bit-height gauge for easier bit setup and enhanced cut precision. With an easy-to-store folding design, this preassembled table has folding legs with storage compartments for convenience and portability. When routing curved workpieces, the starter pin and guard help support the workpiece to allow easier control.

Ultra Portable Design

With folding legs for fast set up and easy storage.

Easy Click

Router mounting system for fast and easy set up. Also allows for no leveling and easy bit adjustments.

Laminated MDF Top

For smooth and precise cuts.

Onboard Storage

Perfect for holding router bits and spare parts.

Product description

The cabinet style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

The Bosch RA1171 Cabinet-Style Router Table provides a premium work surface for woodworking and routing. Designed to fit a variety of routers and able to mount on any workbench, this router table is a versatile piece of equipment that will serve as an indispensable part of any woodworking shop. And with its cabinet-style construction, it offers better dust collection and noise reduction for a more efficient work environment.

Designed for Versatility and Precision

Thanks to its versatile design, the RA1171 lets you work with a variety of materials while ensuring precision with every cut. With a tall aluminum fence measuring 4-7/8 x 25-1/8 inches (HxL), the table handles tall stock with ease. The fence also features adjustable MDF face plates for better support and smoother operation.

The rigid aluminum router mounting plate stays flat and true for precise, accurate cuts, and for added versatility, it's pre-drilled to fit a variety of routers.

The easy-to-use featherboards attach to the fence and table and are fully adjustable to fit a variety of workpieces. They provide additional support and control while feeding stock across the routing table.

Dust Collection Ports and Accessory Slot

The RA1171's cabinet-style design excels at dust removal. It features two dust collection ports for removing dust and debris, and they both fit standard-sized 2-1/2 inch vacuum hoses.

Use the accessory slot to add additional featherboards, as well as 3/4-inch optional accessories, such as any miter gauge measuring 3/4 x 3/8 inches deep.

The RA1171 Cabinet-Style Router Table measures 25-1/2 x 14-1/2 x 15-7/8 inches (WxHxD) and weighs 42 pounds. It has a maximum fence opening of 3-3/16 inches and a maximum throat opening of 3-5/8 inches. It is backed by Bosch's one-year limited warranty, 30-day money back guarantee, and one-year service protection plan.

What's in the Box

RA1171 Cabinet-Style Benchtop Router Table, set of three mounting-plate insert rings, mounting hardware, two adjustable featherboards, adjustable clear guard, starter pin and guard, and two 1/16-inch thick outfeed fence shims.

From the Manufacturer

The cabinet-style functionality, expanded and precise material support and a dual outlet switch make this the perfect solution for woodworkers in search of a quality benchtop router table for the shop.

• Support: The tall aluminum fence measuring 4 7/8 inch x 25 1/8 inch can handle tall stock with ease; The fence is complete with adjustable MDF face plates for smoother operation with taller work pieces and out feed can be offset for jointing
• Precision: The Bosch RA1171 features a rigid aluminum router mounting plate that stays flat and precise for accuracy; For added versatility, it’s pre drilled to fit a variety of routers
• Easy to use: Two easy to use feather boards attach to fence and router table, providing additional guidance and protection against kickback; They’re fully adjustable to fit a variety of work pieces; Accessory slot accepts additional feather boards and 3/4 inch optional accessories such as miter gauge
• Clean up: With a cabinet style design, the RA1171 is able to feature two dust collection ports for removing any job site dust and debris; The dust collections ports fit standard 2 1/2 inch vacuum hoses
• Convenience: Featuring a dual outlet switch with 6 feet power cord; Includes bench top router table, aluminum router mounting plate, 3x mounting plate rings, mounting hardware, 2x adjustable feather boards, adjustable clear guard, starter pin and guard, and 2x out feed fence shims

User questions & answers

Question:	compatible with Skil router
Answer:	Thank you for your question. Yes, the RA1171 is compatible with Skil routers. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	How much does it weight
Answer:	It's built with particle board. Very similar to melamine. I couldn't tell you the precise weight, but I would judge it (sans router) to weigh about the same as a case of whiskey. Six 1.75 mL plastic bottles.
Question:	Will my ridged r24012 fit
Answer:	Thank you for your question. The Bosch RA1171 router table will work with several manufacturers routers. We have not tested with any Rigid routers, however if your model does not match up with any of the holes in the mounting plate you can mark off and drill the needed holes to match up with your router. Most plunge routers are not designed to be used in a router table. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499)
Question:	Is there an important difference between this table, and the Bosch RA
Answer:	The main difference is the cabinet which helps cut the dust down. The table top of this unit is laminated MDF which is not as durable as the metal top of the RA1181, however the plastic legs on the RA1181 are certainly not going to be as durable as the cabinet on this unit. I should also point out that while the table is made of MDF, the router plate is made of metal. Since that is where all the action is taking place, I fully expect this unit to last many many years. This unit has 2 dust ports, one behind the router bit and another in the cabinet itself. This really helps keep the dust down. the RA1181 will likely make a much bigger mess as all the stuff flies out of the bottom. The cabinet also serves as a handy place to store all the little goodies like feather boards, knobs, and whatnot. I have this unit and considered the RA1181 for a little while. I am 100% happy with the cabinet design and would certainly get it again. The only problem I have is that neither table comes with a miter guage. I added the POWERTEC 71005 guage to my table and it's awesome! It has a sturdy all-metal design and is a perfect fit for the miter slot in the table. Whichever table you get, I strongly suggest adding a miter guage

Product features

Bosch RA1171 Cabinet Style Router Table

The Bosch RA1171 Router Table features a cabinet-style design with a smooth laminated work surface for precision woodworking, making it an ideal benchtop solution for any workshop. The cabinet-style construction is ideal for stability, storage and dust collection. Its rigid aluminum router mounting plate is pre-drilled for compatibility with a variety of routers and for above table height adjustment with many common routers. The tall fence handles taller stock, and adjustable MDF faceplates and featherboards maximize precision and versatility. It also features a dust-collection port at the fence and one at the cabinet, for maximum dust management.

Cabinet Style Design

Ideal for stability, storage, and dust containment.

Aluminum Mounting Plate

Pre-drilled for compatibility with a variety of routers and for above table height adjustment with some routers.

Extra Tall Aluminum Fence

With adjustable MDF faceplates and featherboards to maximize precision and versatility.

Two Dedicated Dust Ports

One at the fence and one at the cabinet – for maximum dust reduction.

Product description

Specifations:



Miter gauge adjustment: 0-90

Product Length: 34in.

Product Width: 13-1/3in.

Product Height: 15in.

Table Material: main table: Al died cast, extension table : Steel.



Dust collection ready.



Designed for routers with up to a 6 inch diameter base plate.



A precise miter gauge for aiding in straight and predictable cuts.



Transparent guard which can move freely with no binding that keeps wood chips from flying around.

• Extra Large Extension Table: Besides the main table, this router table features extension tables at both ends. Each extension table comes with an extra-large size of 8" × 18" and an easy-slide surface.
• Retractable Guard: There is a transparent guard inserted into the fence with no binding to keep wood chips from flying around. This router table is designed for routers with up to a 6-inch (150mm) diameter base plate. Router bits with base plates within this size all works.
• Multifunctional Fence and Exact Miter Gauge: The fence is able to provide work piece support around the bit and with the combination of jointing fence to make the table be used as a vertical jointer. On the tabletop, it includes a precise miter gauge for aiding in straight and predictable cuts. It can be used to help measure angles.
• Material and Frame: Consists of aluminum alloy do of the main table and steel do of the extension table and structure, this router table is rugged durable. The aluminum table is rustproof and lighter for easy moving, and the wide stance heavy-duty steel stands increase the stability.

User questions & answers

Question:	Why is there no picture of the miter gauge
Answer:	it comes with one
Question:	Does this come with the feather boards shown in the picture
Answer:	yes
Question:	Many accessories are shown. What is actually in the box
Answer:	everything you see in picture is what you get with it
Question:	Does this come with router
Answer:	A router does not come with the router table

Product description

Get precise performance and keep your work area clear with the DeWalt DW6913 router edge guide. Designed to work with all DeWalt routers and to attach to standard 1-1/4-inch, 1-3/8-inch, and 1-1/2-inch shop vac hoses, this straight edge guide offers a parallel fence that can be adjusted precisely using a fine, easy-to-read adjuster for precision set-up.

From the Manufacturer

Dewalt DW6913 Router Edge Guide with Fine Adjustment and Vacuum Adaptor

• Straight guide with fine fence adjuster for precision positioning of the parallel fence
• Attaches to standard shop vacuum cleaners (1-1/4-inch, 1-3/8-inch and 1-1/2-inch)
• For use with all DEWALT routers
• Includes adapter for use with standard 1-1/4, 1-3/8 and 1-1/2-inch shop vacs
• Backed by a 1-year warranty

User questions & answers

Question:	will this guide fit the fixed and plunge base of a Dewalt DW611 PK router 11/4 horse motor
Answer:	Yes, my order came with everything pictured.
Question:	Does anyone know the size of the support rods and their distance centre to centre? thanks. am thinking to buy the bosch1054 instead for dw
Answer:	Yes they both slide left and right. Be aware that the slots that tighten the aluminum fence to your table are also meant to go left and right, not forward and back. This made no sense to me and I cut my own slots in. Other than that great product!
Question:	What is the distance between the rod centers in both, short and long separation setups
Answer:	I have a Bosch 1617 router on my table. I had to fit it on myself. No problem.
Question:	It says it fits all Dewalt routers. Does this include the new 1/4" shaft plunge router
Answer:	The table stop is included, and the newer fence has included micro adjustment, so the micro adjuster pictured is not included.

Product description

Provide dependable support for your planer while keeping it mobile using the DeWalt DW7350 Planer Stand with Integrated Base. This set-up features strong, reliable, heavy-gauge steel brackets that are capable of supporting even the bulkiest bench top planers, and a medium-density fiberboard top that is predrilled for easy installation of any DeWalt planer. If your planer doesn't line up with the existing holes, it's easy to drill new holes to accommodate it. Perhaps the most innovative feature of this set-up is the wheel set, which can be engaged or disengaged using a foot pedal for instant portability or secure work.

From the Manufacturer

DEWALT DW7350 Planer Stand with Integrated Mobile Base

• Maximum versatility
• Durable and stable under heavy loads
• Easy movement and storage of planer and stand
• Comes in heavy duty size of 24-by-22-by-30-inches and weighs 59-pounds
• Includes mobile base, stand, hardware, MDF top, shelf

User questions & answers

Question:	When measurements are given, is it length x width x height
Answer:	Used both of mine in a tent and they did not damage the tent floor.
Question:	how tallis it
Answer:	I used a wet cloth to clean, so convenient
Question:	Would the stand height be appropriate, and is it sturdy enough for mounting a bench-top drill press
Answer:	Yes
Question:	What are the exact dimensions of the "foot print" of this stand
Answer:	No , but you can use inside a tent.

Product features

DEWALT Planer Stand with Integrated Mobile Base

The DW7350 Mobile Thickness Planer Stand is constructed for durability and stability under heavy loads. Ideal for easy movement and storage of planer and stand.

Features:

-Maximum versatility.

-Durable and stable under heavy loads.

-Easy movement and storage of planer and stand.

Product description

Variable speed control with soft starting motor features full time electronic feedback that maintains motor speed through the cut. Dual LED's and clear sub base ensure maximum visibility, adjustment ring enables controlled bit depth changes, large, low-pressure spindle lock button, multiple shaft lock detents, depth ring, clamping mechanism and spring loaded release tabs. Specs: 7.0 amps, 16,000-27,000 RPM no load speed, 1/4" collet diameter, 1.5" plunge stroke, 4" base dimension, 12 position spindle lock, weighs 4.1 lbs. Includes: motor, standard base, wrench and instruction manual.Plunge base incorporates fine-tune adjustment rod for precise depth setting. Aluminum motor housing and base construction provides long term durability

Combining power, ease-of-use, ergonomic features and innovations designed for visibility, control and overall performance, the DEWALT DWP611 compact router can handle a variety of applications--from small bevel cuts to large edge profiles and heavy flush trimming. In addition to its beefy 1-1/4 horsepower motor, the DWP611 is equipped with dual LED lights for ample illumination. This package comes with a fixed base, but it's also available as a kit with both fixed and plunge bases.

The DWP611 with fixed base (view larger).

 

Dual LED's and clear sub-base ensure maximum visibility (view larger).

Power and Performance

The DWP611 compact router features a 1-1/4 peak HP motor that delivers significantly more power than competitors' models to help you be as productive as possible. The variable speed control helps you to better manage the tool and determine the speed that is best suited for the application at hand. A low, contoured grip that is close to the work surface also contributes to an excellent level of control--providing both precision and productivity on the job site. The soft starting motor features full time electronic feedback that maintains motor speed through the cut. An adjustment ring enables controlled bit depth changes to within 1/64-inch.

Comfort and Convenience

The fixed base's dual LEDs and clear sub-base ensure maximum visibility in operation. The extended 1/4-inch router collet provides greater bit contact with the bit shaft than traditional routers, allowing you a firm grip on the bit and less vibration. The D-shaped sub-base provides stability and flatness when running edge profiles, and the spindle lock has been designed to greatly improve the ease of bit change by incorporating a large button that can be actuated with the same hand that stabilizes the router.

The router also features two tabs that allow for a quick and simple base release, and a new base/adjustable clamp design so the motor location is maintained through the toughest applications.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase).

• Imported from: Mexico
• POWER TOOLS
• Commercial Brand: DEWALT

User questions & answers

Question:	Hi, i want to buy this dewalt dwp611, but i need to know if it suits me for a cnc router, can you work varis hours? and can i use 3mm cutters
Answer:	I picked up a 1/8" & 1/4" precision collet from thinker tinker, but I have never seen a true 3mm collet. I believe the 1/8" is just a little too big.
Question:	see 2 different opinions on whether or not this can be used with a router table can or can't it be used . Thanks
Answer:	As others have stated, any router can be set-up on a table. I believe Rockler woodworking sells a plate for a small table. The real question is what type of work you plan to do with the router... The DeWalt DW P611 is a great little router. I use one on a CNC router... doing very fine detail work. It does, however, have limitations. Serious woodworkers usually prefer a router with a 1/2" collet. The 1/2" bits are more robust and come in a wide selection of profiles... and with an adapter, 1/4" bits can be used... adding versatility. As for power, if for example, you will be making door panels, the Dewalt would not be a good choice. I have 3 1/2" routers in the 2 1/2 to 3 hp range. Another nice feature to consider is a "plunge" Again, it all depends what you plan to use it for...
Question:	Does know how loud this router runs? Could anyone with a noise dosimeter check how many dB
Answer:	At 17500 RPMs (1.5 on the settings dial) mine measures 78.9 db A weighted at 3 feet.
Question:	Are there any tables besides the Rockler one that this could mount to? I'm just looking to do rabbets and decorative edges on small picture frames etc
Answer:	I just now finished (30 minutes ago) fitting mine to a Skil RAS900 router table. Works like a charm. With multiple passes with shallow cuts, you could probably route most anything. To make it fit, I simply cut four small (2") aluminum brackets (drilled holes for the small bolts & screws, etc) to attach the router to the table's mounting plate. The Skil RAS800 is the same, so it'll fit that table as well. In fact, if you can fabricate your own brackets or drill holes in mounting plates (for tables with that type of mounting), it will probably fit any table.

Product features

1-1/4 HP Max Torque Variable Speed Compact Router

The DWP611 1-1/4 HP Max Torque Variable Speed Compact Router with LED's has a 1-1/4 HP motor to deliver power for the toughest applications, and variable speed control for optimal bit speed in each application. Allows quick and easy bit and base changes. LED light and clear plastic fixed base provide superior bit visibility.

Product description

Compatible with major router brands, this Ryobi 32 in. x 16 in. router table includes 5 throat plates and has an integrated vacuum port to simplify woodworking projects. Whether smoothing edges for uniformity

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

User questions & answers

Question:	Will this table work with a lotos er001 plunge router
Answer:	Think it is compatible with all routers
Question:	will this work with bosch 1617EVS router
Answer:	Have no idea, my router is ryobi
Question:	can I mount a ryobi r163 fixed base router to the table so that the t wrench will operate on the router
Answer:	Not advisable! Cause your have to take into consideration of the weight the table ...
Question:	Is this compatible with Dewalt Router
Answer:	Yes it should be fine. I put an old craftsman on and works great

Product description

Route and smooth even demanding hardwoods with the 1-3/4 horsepower DEWALT DW616 fixed base router, which provides a micro-fine depth adjustment ring provides for precise depth adjustments in 1/64-inch increments. And the adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking. Do not hand-hold the router in an upside-down or horizontal position

From the Manufacturer

Powered by an 11 amp motor, this fixed base router features the micro-fine depth adjustment ring which provides precise, quick depth adjustments in 1/64-inch increments and constant switch and cordset location. An adjustable, tool-free motor cam lock and quick release motor latches provide easy depth change, quick motor pack removal and solid base locking. Precision-machined die-cast aluminum base; nickel-plated, die-cast aluminum motor housing; detachable cordset; dust-sealed switch; and a clear, Lexan sub-base provide enhanced durability. Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control. Part of an interchangeable router system of two motor packs and three bases: fixed, plunge, and D-Handle. Includes 1/2-inch and 1/4-inch one-piece, self-releasing collets, two wrenches, and a concentricity gauge to ensure bit to sub-base centering.

• 1-3/4-hp, 11-amp motor provides the power to rout smoothly through the toughest hardwoods
• Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments
• Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking
• Quick-release motor latches for fast and easy motor pack removal for bit and base changes
• Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy

User questions & answers

Question:	Does this dewalt router have a light to allow you to see the work area better while the machine is running
Answer:	No it has no light.
Question:	Hello good days I need all that weighs this article to be able to square the cost of sending towards venezuela
Answer:	Hola! El router pesa 10 libras ... eso si, no se si hacen envíos a Venezuela. Debes verificar con Amazon. Saludos desde Puerto Rico!
Question:	can this model be used in router table (no dust protection
Answer:	yes I put mine in a stand wright away works great. Thanks DavidA
Question:	What will the 2.25 HP Dewalt router do that this will not? Differences
Answer:	Well it depends a lot on what purpose you are using it for. The HP claims are pretty much worthless as both will be equal in terms of mid-size routing. The major flaw the 2.25HP (DW618. I'll refer to it as "618". Whereas this is the DW616... SO, "616") has is it cannot be used in an upside down router table without blowing up bearings in it. THE 616 is fine in a table. Also, the 616 has a quick start vs 618 which is a slow start. This means the 616 is running full speed at start, while the 618 starts slow and takes a second or two to build up speed. Both have advantages, and disadvantages. The BIGGEST issue for myself and others is that the 618 motor has... well... fire problems. Lol. That motor does not like extended use and with eat up brushes like mad. The 616 might have a bit less power, but its basically unnoticeable if you are using good sharp bits. Most importantly... the 616 (the "weaker" of the 2) tends to handle a lengthy runtime without catching fire lol. Personally, I prefer the 616 when it comes to mid-range routers. It has plenty of power, even with hardwoods, and larger bits. If you are planning on closing giant bits, or surface planing, I'd recommend neither and point you to a larger plunge base style of router with much greater strength, but a much higher weight.

Product features

DW616 Fixed Base Router

1-3/4 HP (maximum motor HP), 11.0 amp motor provides the power to rout smoothly through the toughest hardwoods.

Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking.

Detachable cordset offers cordset serviceability and removes the need for a 'shorty' cord motor pack.

Clear, LEXAN sub-base provides enhanced base durability, bit visibility, and accepts standard template guide bushings.

Dust-Sealed Switch protects against dust ingestion for longer switch life.

Nickel plated motor housing for a smooth, long-lasting depth adjustment.

Fixed Base Router

Flat top for easy bit and depth changes.

Micro-fine depth adjustment ring provides precise depth adjustments in 1/64" increments and adjusts vertically for a constant switch/cordset location.

Quick release motor latches for fast and easy motor pack removal for bit and base changes.

Sub-base concentricity gauge included to ensure bit concentricity for best-in-class accuracy.

Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control.

Heavy-duty, precision machined, die-cast aluminum base and motor housing for durability and low tool weight.

Right or left switch and cordset location provides the ability to have the switch in your right or left hand.