10 best bostitch cordless tools

Product description

The BOSTITCH BCF30PTB 20V MAX* 30 Degree Paper Tape Cordless Framing Nailer Bare tool allows you to go cordless with this 100% battery powered framing nailer. Its two-speed motor drivers a full range of framing nails, and a tool-free firing mode selector lets you quickly change between sequential and bump-fire modes. This tool accepts clipped and full round head nails in 30-degree paper tape collation. It also offers a rafter hook and a tool-free depth adjustment, along with a stall release lever to reset the driver blade in case of a jam. Cordless helps you net savings in time and cost. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a Bostitch battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a Bostitch battery-powered nailer. *This is a bare tool item - battery sold separately. Backed by a Bostitch 3 year limited warranty. Includes: BCF30PT Paper Tape Framing Nailer, () No Mar Tip.

• Tool free selector switch for sequential and bump fire modes; for accurate fastener placement and faster application speed
• Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3 1/2 inches fasteners
• Accepts clipped and full round head nails in 30 degree paper tape collation
• Stall release lever to reset driver blade in case of jam
• 3 year limited warranty

User questions & answers

Question:	Where do you get the lubricating oil for the piston for this
Answer:	The sawhorse is 29.5inch length 36.2inch width 28.7inch height. ANDGOAL sawhorse takes up very little space when folded.
Question:	does amazon sell nails for this nailer
Answer:	ANDOGOAL log sawhorse adjusted according to different habits of people, better for the length of logs 12inch to 60inch.
Question:	What am i doing wrong bought two of these as gifts and none of them work. Cant strike nails more then half way on full and only works when it wants to
Answer:	I do not remember seeing any. I put 16 " 12 ft oak, hickory, and poplar logs through it. When you do use a long log, put about a third of it through, cut it down, then slide the log back through to finish.
Question:	How many nails can you shoot before the battery needs recharging
Answer:	This is difficult to describe. There are actually 2 identical springs. They go behind the wing nuts on the inside of the bolts that go through the large white movable frame. They hold the bolts steady and in place, presumably to hold the strap, the end of which is slipped onto the bolts on the outside of the frame, more secure. Be sure to look carefully for the second spring. I seem to remember that I, too, at first had seen only one and then had to rummage through the packaging to find the second one. Hope this helps.

Product description

BOSTITCH Air Compressor Combo Kit, 3-Tool (BTFP3KIT)

The BOSTITCH BTFP3KIT 3-Tool Portable Air Compressor Combo Kit is ideal for interior and exterior finishing and trimming project for a variety of crafts like furniture, cabinets, and staircases. It features a 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM* delivered 90 PSI pump, which enables long tool run time with quick recovery. The air compressor features long-life oil-free, maintenance-free pump for convenient use. It has a BOSTITCH high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. At only 78.5 dBA** operational noise level it offers you a quiet work environment. The SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8 in. to 2 in.. SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4 in. to 2-1/2 in.. The BTFP71875 heavy-duty 3/8 in. crown stapler drives 3/8 in. crown staples from 1/4 in. to 9/16 in. and 18GA brad nails from 1/2 in. to 5/8 in.. 1/4 in. x 15' PVC air hose with fittings is included. Includes: 1) 6-gallon Pancake Compressor, 1) 18GA 2 in. Brad nailer, 1) 2-1/2 in. 16GA Straight Finish Nailer, 1) Heavy Duty 3/8 in. Crown Stapler, 1) 25' Air Hose.



BOSTITCH 18 Gauge Brad Nails, 1-3/8-Inch, 1000 per Box (BT1335B-1M)

Bostitch 18-Gauge Brad Nail.

BOSTITCH BT1335B-1M 1-3/8-Inch 18-Gauge Brads, 1000 per Box

• 1 of BOSTITCH Air Compressor Combo Kit, 3-Tool (BTFP3KIT)
• 1 of BOSTITCH 18 Gauge Brad Nails, 1-3/8-Inch, 1000 per Box (BT1335B-1M)

Product description

The Bostitch GFN1564K Cordless 15-Gauge FN Angled Finish Nailer is a lightweight and portable tool that's ideal for putting the finishing touches on molding, furniture, cabinetry, and more. Its user-friendly features offer efficiency and convenience, and its rechargeable lithium-ion battery gives you an energy-efficient alternative to heavy and bulky corded tools.

Ideal for Precision Finish Work

Designed for precision finish work on shoe and cove molding, crown molding, baseboard, chair rails, cabinetry, furniture, door jambs, door casings, paneling, stair assemblies, and more, the Bostitch GFN1564K is a powerful tool that operates consistently and efficiently.

The Bostitch GFN1564K uses 1-1/4-inch to 2-1/2-inch FN-style 15-gauge angled finishing nails to minimize wood splitting without predrilling and to securely fasten even small and fragile pieces without denting and scratching their surfaces. And thanks to its 100-nail magazine and 332 inch/pounds of torque, the GFN1564K will help you get all your finishing jobs done quickly.

Compact and Lightweight for All-Day Use

At an easy-to-handle weight of 4.2 pounds, the Bostitch GFN1564K can be used for long periods of time and in overhead positions with minimum operator fatigue. The over-molded rubber grip offers comfort for all-day projects, and the compact, angled design makes it easy for you to reach into corners and tight spaces. When it's time to take a break, just use the nailer's built-in utility hook to hang it up until you're ready to start again.

Lithium-Ion Power Provides Cordless Convenience

Enjoy the flexibility and portability of the cordless Bostitch GFN1564K, which eliminates the need for messy cords and noisy compressors. With easy maneuverability, this nailer lets you move quickly and efficiently around the jobsite, completing big projects with less time and energy. The lithium-ion battery completes a full charge in just one hour, ensuring continuity in your work.

Tool-Free Adjustments Increase Efficiency

Enhance productivity and avoid frustration with the convenient, tool-free features of the Bostitch GFN1564K. An adjustable depth guide allows you to quickly set nails to your desired depth, and eliminating jams is easy with the clearance feature that helps remove jammed fasteners. The low nail lock-out prevents dry fire, extends tool life, and keeps you from firing an empty tool and marring the surface of your work piece.

The Bostitch GFN1564K is backed by a manufacturer's two-year limited warranty.

What's in the Box

Bostitch GFN1564K Cordless 15-Gauge FN Angled Finish Nailer, rechargeable battery, battery charger, car adaptor, wrenches, safety glasses, manual, cleaning guide, warranty card, and carry case.

From the Manufacturer

The Bostitch 15-Gauge angled FN finish nailer is ideal for applications including moldings, door/window casings, trim, hardwood flooring, furniture, and woodworking. It is engineered to help professionals achieve the level of craftsmanship they were always capable of. The tool is very lightweight, weighing in at only 4.4 pounds. Additionally, its over-molded grip helps maximize comfort and minimize fatigue during overhead applications and prolonged use. The tool features tool-free depth adjustment and jam clearing technologies which save the user frustration and time. Moreover, its low nail lock-out prevents dry fire and extends the overall life of the tool.

• Low nail lock-out prevents dry fire and extends tool life
• Over-molded comfort grip
• Tool-free depth adjustment
• Tool-free jam clearance
• Adjustable utility hook

User questions & answers

Question:	How many 2.5 inch nails can I put through this gun with a gas cylinder (how many nails/gas cylinder
Answer:	The simple reason your Sawhorse won't stay up is that it's missing a part. On the bottom legs that spread out and sit on the ground there needs to be a piece of metal from one leg in front to the other leg in the back in order to keep them from pulling apart when you place a log on the Sawhorse. My wife used a scrap piece of angle iron drilled a hole in each end of the angle iron and a hole in the front and back legs, then used 2 bolts and 2 nuts to mount the angle iron from one leg to the other leg on one end of the sawhorse. A piece of chain would work nicely too as it would flex and allow you to fold up the sawhorse when not in use. Apparently, the company that built the sawhorse thought the bottoms of the legs would stick in the ground far enough to keep them from pulling apart, but that doesn't always work, especially if they are setting on a concrete pad. Thanks
Question:	Passlode comparable
Answer:	Not sure what you are asking here. This is fairly easy to assemble if you start first with "X" pieces, then bottom support strut, then diagonal support struts. The pieces line up exactly. If for some reason you are missing a bolt, Lowe's, Home Depot or any hardware store can match those for you. Once you get it together, you're going to really like this sawhorse. It is perfect for cutting logs for a wood burning stove - easily takes away the constant measuring of the logs for the stove.
Question:	Can this be used over 5000 feet
Answer:	The drawing, that came with mine, showed a picture of the finished product with screws and crossbars all with numbers that corresponded with the packing list. Assembly took way too long . I had been under the impression that it was ready to use right out of the box. I wouldn’t recommend this product.
Question:	Where do I get the fuel for this nail gun
Answer:	This sawhorse is fully assembled and can be used directly by opening the folded part.

Product description

The BOSTITCH BCN680D1 20V MAX 18 Gauge Cordless Brad Nailer Kit allows you to go cordless with this 100% battery powered brad nailer. It drive 18 GA brad nails from 5/8 in. to 2-1/8 in., features a narrow nose designed for clear line of sight and accuracy of nail placement, tool-free depth adjustment, and a tool-free selector switch for sequential or contact actuation modes. The brushless motor allows for optimal runtime and durability. This cordless nailer offers a tool-free jam release to quickly and easily clear nail jams - and a tool-free stall release lever to quickly reset the driver blade in the event of a stall. Multi-function LED lights help to provide both workspace illumination and tool diagnostics. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by Switching to a BOSTITCH battery powered nailer. Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubrication costs by Switching to a BOSTITCH battery powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCN680 18 GA brad nailer, BCB203 20V MAX high capacity li-ion battery (2.0Ah), BCB115 charger, adjustable belt hook, kit bag.

• NO COMPRESSOR NEEDED: Save time and money by going cordless
• BRUSHLESS MOTOR: Brushless motor and engine design drives 18ga Brad nails from 5/8" to 2-1/8" length.
• NARROW NOSE: Narrow nose designed for clear line of sight and accuracy of nail placement
• LED LIGHTS: Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
• QUICK JAM RELEASE: Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Will this work with Bostitch 18v Lithium Ion batteries
Answer:	You’ll need additional hardware
Question:	Will 20 volt Dewalt batteries work in this nailer
Answer:	I think it took around an hour I was missing one washer and I relied more on the picture from the website than the instructions that came with the item but it seems like a solid little unit
Question:	Does this shoot 18 ga staples as well
Answer:	My answer--I suppose it could be sold assembled but you would have to pay much more for shipping. My wife assembled ours and has used it several times already so I would say it couldn't be that hard to assemble.. Actually, I would contact the Manufacturer, Northern Tool, and ask them why they can't sell it already assembled. Thanks

Product description

The BOSTITCH BCF28WWM1 20V MAX 28 Degree Wire Weld Cordless Framing Nailer Kit allows you to go cordless with this 100% battery powered framing nailer. This cordless framing nailer drives framing nails up to 3-1/2 in., features a 2-speed motor, and has tool-free depth adjustment and selector to quickly change between sequential and bump-fire modes. It accepts full round offset nails in 28-degree wire weld collation, and also comes with a rafter hook. It also has a stall release lever to reset the driver blade in case of a jam. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by switching to a BOSTITCH battery-powered nailer. **Frequent gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCF28WW Wire Weld Framing Nailer, BCF204 20V MAX* High Capacity Li-Ion Battery (4.0Ah), BCB115 Charger, Kit Bag.

• NO COMPRESSOR NEEDED: Save time and money by going cordless
• OPTIMIZATION AND POWER: Brushless motor and engine design includes two speeds for optimized performance and enough power to drive 3-1/2" fasteners
• NAIL SIZE:Accepts full round offset nails in 28-degree wire weld collation
• STALL RELEASE LEVER: Stall release lever to reset driver blade in case of jam
• WARRANTY: 3 year limited warranty

User questions & answers

Question:	Is there an advantage with this nailer over the bostitch cordless nailer that takes the paper tape nails? I am trying to decide which one to buy
Answer:	I have been very happy with mine. Used to put true 2 inch oak planks down on a barn floor. Nails are pricey but worked way better then trying to fasten them with screws..
Question:	Will this work with full round nails
Answer:	We used it to shoot 51/4 inch nails with no problem at all. Great tool
Question:	Any chance dewalt 20v batteries fit this gun
Answer:	If you look near the tip, where the next nail is waiting to be fired, there is only room for a 3 1/4" nail at best. Mine is loaded with 3" now and there's about 3/8" gap below that. You might be able to fit 3 1/2" nails if you machined off some material. But at that point just get a gun that will accommodate longer nails.
Question:	Will this drive a nail thru 3/8" thick lp smart siding. (hardboard siding)? how many amp hour battery and how long it last? thanks
Answer:	No, this is a framing nailer

Product description

The BOSTITCH BCN662D1 20V MAX 16 Gauge Cordless Straight Finish Nailer Kit helps you save time and money by doing the job 100% battery powered. It drives 16Ga straight nails from 1-1/4 in. to 2-1/2 in., features a narrow nose designed for clear line of sight and accuracy of nail placement, tool-free depth adjustment, and a tool-free selector switch for sequential or contact actuation modes. The brushless motor allows for optimal runtime and durability. This cordless nailer offers a tool-free jam release to quickly and easily clear nail jams - and a tool-free stall release lever to quickly reset the driver blade in the event of a stall. Multi-function LED lights help to provide both workspace illumination and tool diagnostics. Pneumatic nailer users can save up to 20 minutes daily in set-up and clean-up time by Switching to a BOSTITCH battery-powered nailer. Frequent Gas nailer users could save up to $15 per week in fuel cells and cleaning and lubricating costs by Switching to a BOSTITCH battery-powered nailer. Backed by a BOSTITCH 3 year limited warranty. Includes: BCN662 16 GA straight finish nailer, BCB203 20V MAX high capacity li-ion battery (2.0Ah), BCB115 charger, adjustable belt hook, kit bag.

• NO COMPRESSOR NEEDED: Save time and money by going cordless
• MORE POWER: Brushless motor and engine design drives 16ga straight finish nails from 1 1/4 inch to 2 1/2 inch length
• INCREASED ACCURACY: Features a narrow nose designed for clear line of sight and accuracy of nail placement
• BETTER VISIBILITY: Multi functional LED lights help to provide both workspace illumination and tool diagnostics
• SAFER & MORE EFFICIENT: Tool free jam release to quickly and easily clear nail jams
• TOOL FREE SELECTOR: Tool Free Selector switch for sequential and contact actuation modes; for accurate fastener placement and faster application speed

User questions & answers

Question:	Does it come with charger
Answer:	1 year limited warranty
Question:	can it use for the floor
Answer:	I do not believe you can connect to Alexa etc. You have to tap the lens for them to go on.
Question:	Has anyone tried using a dewalt battery in this nailer
Answer:	No, these puck light lights do not work with a remote. The puck lights at the link below work with a remote. https://www.amazon.com/Brilliant-Evolution-BRRC135-Wireless-Control/dp/B01JTA4QXI/ref=sr_1_1?m=A11OWZFCGTC6EW&s=merchant-items&ie=UTF8&qid=1504893694&sr=1-1
Question:	What type of mail can I buy for this one ? Can any brand fit with this one
Answer:	if your batteries cna stand the cold temp!

Product description

The Bostitch BTFP3KIT 3-Tool Portable Air Compressor Combo Kit is ideal for interior and exterior finishing and trimming project for a variety of crafts like furniture, cabinets, and staircases. It features a 150 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered 90 PSI pump, which enables long tool run time with quick recovery. The air compressor features long-life oil-free, maintenance-free pump for convenient use. It has a Bostitch high efficiency motor for easy start up in cold weather or extension cord application [14 ga or larger, 50 ft. (15.2 m) or less]. At only 78.5 dBA operational noise level it offers you a quiet work environment. The SB-1850BN 18 GA brad nailer drives 18GA brad nails from 5/8 in. to 2 in.. SB-1664FN 16 GA straight finish nailer drives 16 GA straight finish nails from 1-1/4 in. to 2-1/2 inch. The BTFP71875 heavy-duty 3/8 in. crown stapler drives 3/8 in. crown staples from 1/4 in. to 9/16 in. and 18GA brad nails from 1/2 in. to 5/8 in.. 1/4 in. x 15' PVC air hose with fittings is included. Includes: 1) 6-gallon Pancake Compressor, 1) 18GA 2 in. Brad nailer, 1) 2-1/2 in. 16GA Straight Finish Nailer, 1) Heavy Duty 3/8 in. Crown Stapler, 1) 25' Air Hose.

• CORDLESS AIR COMPRESSOR: The BTFP02012 is at 6 gallons, 150PSI, and 2.6SCFM with a high efficiency motor.
• BRAD NAILER: The SB-1850BN drives 18-gauge Brad Nails from 5/8" to 2" for a wide variety of applications
• STRAIGHT FINISH NAILER: The SB-1664FN drives 1-1/4- to 2-1/2-inch, 16-gauge finish nails.
• HEAVY DUTY CROWN STAPLER: The BTFP71875 drives heavy duty 3/8" Crown staples from 1/4" to 9/16"
• AIR HOSE: 15-foot, 1/4" x 25' PVC air hose with fittings air hose, and fittings offer plenty of length for maneuverability
• WARRANTY: This kit is covered by a 1-year limited warranty for peace of mind

User questions & answers

Question:	How long for pressure to build up on initial start up? Thanks
Answer:	If it's not holding pressure check all connections you may have a loose one.
Question:	If i buy this for my husband, do i need to buy an air hose, and if so, what do i buy? this is all stuff i know nothing about. thank you
Answer:	Air hose and some attachments come with. In the future you may want to get a kit with air gun, tire inflater and changeable fittings.
Question:	Can this be used for roofing
Answer:	It works perfectly to run one roofing gun. I’ve bought two of them and they both could handle the work load perfectly. And to comment on one of these guys replies to your question, He said the compressor would run continuously and burn up” well that’s not only untrue but impossible. You would have to be able to lay 5 square an hour all day long not just an hour or two for it to even be remotely possible to burn up that compressor. Not saying you couldn’t lay 5 square an hour but you can’t do it for several hours straight that’s for sure. I personally have put on 11 bundles per hour for the first 2 hours and the compressor did not run continuously and even if it did it wouldn’t have burnt up. Those specific compressors are designed to click off and on as many times as you can make them do so.
Question:	Can a framing nailer be used on this compressor or just finishing
Answer:	Yes, I run my Hitachi framing nailer off this. Maybe 30-40 .141 x3" nails into dimensional lumber before the compressor kicks on. Could I use a more powerful compressor for framing? Sure. But the weight and cost of this thing are very nice. Would be underpowered for roofing or sheathing applications, though.

Product description

No nailer does everything, but the Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer comes close. Stop at any construction site and watchas the roofers fly through their job with ease. Chances are, they are using the no. 1 roofing nailer in the business--the RN46-1. This little tank is built to last even under extreme job conditions. Bostitch makes sure by dragging it 75-miles across asphalt shingles in its testing labs. Constructed of tough but light magnesium, the RN46-1 weighs only 4.8-pounds and delivers 410-inch-pounds of torque, and it comes with unique features like a single-action side-load canister that is quick and easy to load; a dry-fire lockout so it won't fire when it runs out of nails; carbide inserts wherever it might contact a work surface; skid-resistant pads; a tool-less shingle guide; and an adjustable-depth dial and an over-molded rubber grip.

• 3/4-inch to 1-3/4-inch coil roofing nailer with lockout mechanism prevents firing when empty. Operating Pressure : 70 -120 psi
• Adjustable depth control, full round driver, body and magazine wear guards, side-load canister
• Durable yet lightweight aluminum and carbide tips for long life. Magazine Angle - 15 Degree
• Patented single-action side load canister for fast, one-step nail loading. Adjustable shingle guide for quick shingle spacing
• Backed by seven-year limited warranty

User questions & answers

Question:	Will this coil nailer shoot nails with a 3/8" head
Answer:	Yes, the RN46-1 will shoot roofing nails with a 3/8" head...I think all standard roofing nails have a 3/8" head so any of them from 3/4" to 1 3/4" length should work fine... kd
Question:	can this gun be used to nail hardie siding
Answer:	I wouldn't. This gun can only shoot up to 1 3/4" roofing nails. If it were me, I'd get a siding gun and shoot some longer ring shank nails
Question:	Is this new gun
Answer:	Yes
Question:	Does it come with any type of warranty besides the one that is being offered
Answer:	I would check with the seller you plan to purchase from. It varies, depending on the seller. Some may offer 30-day warranties and others may only pass along manufacturer's warranty information.

Product features

BOSTITCH RN46-1 Coil Roofing Nailer

Lightweight and durable, the Bostitch RN46-1 Coil Roofing Nailer is an ideal tool for roofing, exterior drywall, insulation board, and fiber cement applications. With a patented side-loading canister, zero nail lock-out, easy depth of drive adjustments, and aggressive performance, the RN46-1 is a must-have tool for professional construction workers, builders, roofers, and anyone looking for long-lasting performance from a coil nailer.

Powerful and Accurate Nail Delivery

Amazingly powerful, the RN46-1 is capable of delivering 410 in./lbs. of force at 100 psi. The RN46-1 offers contact trip firing, with the ability to drive up to 100 nails per minute. Contact trip uses a bouncing motion along the workpiece and is great for working on large areas, such as roofs. For shingle work, the RN46-1 features an integrated, tool-less gauge used to control shingle spacing.

Get the Right Depth for the Job

The RN46-1 allows for fast, tool-free depth-of-drive adjustments with its integrated depth dial. The dial has five different settings for finding the perfect driving depth for the job, including flush mount driving, shallow driving, and countersinking.

Product description

The Bostitch BT1855K 18-gauge brad nailer comes with one ¼-inch fitting, one carrying case, one hex wrench, and one belt hook.

• Oil-free engine: requires no daily maintenance and eliminates risk of oil stains on work surfaces
• Selectable trigger system: easy conversion between sequential or contact modes. Trigger lockout mode for use when working in occupied spaces
• Dial-A-Depth control: quickly and conveniently set fasteners to desired depths
• Filtered air inlet for improved engine durability
• Reversible belt hook: with integrated pencil sharpener for ultimate convenience

User questions & answers

Question:	Does the kit come with a carrying case or not? Description contradicts
Answer:	Yes, there is a carrying case included.
Question:	Power source in the description says “corded electric”. I thought the power came from the air compressor. Why am I having to plug it in as well
Answer:	Trust me, it is powered by an air compressor. In fact I used mine yesterday. This is a great product. Just remember to use compressor oil in the nailer before each use.
Question:	Is the trigger the only thing that activates the nail being fired? Seems less safe that way
Answer:	No, the nose of the nailer must be depressed to activate the nailer.
Question:	My moldings require a very accurate placement of the nail. Will the "smart point" be worth the extra money over other nailers
Answer:	Absolutely. I found the placement of the brads to be very accurate using the smart point. I use this nailer all of the time.

Product features

BOSTITCH Nail Gun, Brad Nailer, 18GA (BT1855K)

Description:

This 18 Gauge Brad Nailer Kit Is Both Lightweight And Durable With Easy Mai+ntenance. It Is Quiet And Easy To Maneuver. Depend On This 18 Gauge Brad Nailer Kit For Efficiency And Durability.

Features:

• Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
• Selectable trigger system converts from sequential to contact operation
• Low nail lockout prevents dry firing
• Swivel air fitting with internal filter improves maneuverability
• Ultra-quiet rear exhaust with muffler directs air away from the user
• Reversible belt hook with integrated pencil sharpener
• Dial-A-Depth control for precise countersinking
• Includes Brad Nailer, 1/4" Fitting, Carrying Case, and sample fasteners

Product description

The Stanley Bostitch 651S5 is a sheathing stapler designed with easy to use features for the contractor.  Key features include a flip open nose design for easy jam clearing, adjustable depth of drive, vinyl siding adapter for proper siding installation, adjustable rafter hook, a contoured grip for comfort, and a selectable trigger for tool free switching between contact and sequential operation.  It is lightweight at only 4.2-Pound and powerful with a rapid fire engine that drives 10+ nails per second.  with the 2-Inch capacity it is perfect for applications such as plywood sheathing, roof decking, wood shingles, and vinyl siding. .

• Rapid fire engine produces 10 or more staples per second
• Lightweight at just 4.2 Pound
• Tool free jam clearance reduces downtime

User questions & answers

Question:	where can i get 2" stainless staples for 561s
Answer:	No this stapler isn't designed for that. The staples are to wide. I'm sure the air stapler you saw being used was a 1/4 inch crown stapler!
Question:	will this shoot 3/4in long staples
Answer:	I can’t say specifically for tyvek, but the hammer action isn’t too rough. I’ve used it on Kraft backed insulation to wall studs without many issues. I think the material under the wrap is what makes the most difference. I have used this on roofing felt, carpet padding, and insulation. I have owned it for about 8 years now and still works great.
Question:	Will it load and shoot Senco Q series staples (7/16" 15 gauge
Answer:	It is extremely easy to reload, simply pull out the sliding shaft, place the row of new staples in the slot and slide the unit back together. This was a particularly user friendly feature when walking through the woods posting No Trespassing/No Hunting signs.
Question:	Can I staple hardware cloth (welded wire fencing) with this tool
Answer:	Stamped into the metal chassis are the staple sizes actually accepted by this product, and it only accepts up to 1/2 inch staples. This hammer stapler by Arrow DOES NOT handle 9/16 staples... I tried and they won't fit.