14 best wen table saws

Product description

"Remember when power tools were actually powerful? Reminiscent of your Grandpa’s bandsaw, the WEN 10-Inch Two-Speed Band Saw is the perfect companion for any workshop. With a 3.5-amp motor and a 9-3/4 inch throat, this beast will attack boards with cuts up to six inches deep and 9-3/4 inches wide. Two-speed operation allows for speeds of either 1520 or 2620 FPM. The design of this saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for a variety of both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45 degrees. This package includes a flexible work light to illuminate the worktable, a 3-in-1 dust port to fit a variety of dust extractor hoses (1-3/4, 2-3/4, 4 inches), a fence for creating straight cuts, a miter gauge for angled cuts, and a stand. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. The easy-to-assemble stand elevates the bandsaw without sacrificing space on the shop’s work bench. And because it’s a WEN product, your WEN 10-Inch Two-Speed Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN. Remember when you had a versatile and powerful woodworking saw? Remember WEN."

• 3.5 amp motor creates cuts up to six inches deep and 9-3/4 inches wide
• Uses 72-inch blades anywhere from 1/8 to 1/2 inches in size
• Spacious 14-1/8 x 12-1/2 inch work table bevels up to 45 degrees
• Operates at two speeds of either 1520 or 2620 FPM
• Optional stand allows for either floor standing or bench top applications
• Includes a 2-year warranty, a stand, a work light, a 3-in-1 dust port, a fence, a miter gauge, and a 3/8-inch blade (6 TPI)

User questions & answers

Question:	When centering the blade on the tires, should the blade or the gullets be centered
Answer:	According to Alex Snodgrass the band saw guru with Carter power tools, the gullet of the blade is what should be centered on the tire.
Question:	Do I have to buy the 72 inch blades, or is there some room for a 72 7/16 blade to fit it
Answer:	I don’t have a different answer, but I feel bad for the person that has 21 downvotes, because they’re not wrong. This saw is available in 3 sizes. 72 is for the 10”, 62 is for the 9”. Sorry, ccbdav. Don’t let em get you down.
Question:	Has anyone used this tool to cut thru 4 inch oak? For example table legs
Answer:	The blade that came with it is actually not bad at all as I cut a 5 inch diameter oak log from a chopped tree in my back yard down to a 3"x 3" x 2' piece of usable lumber. I was impressed. I later bought a bi-metal 1/2" 14TPI blade and installed it for metal cutting. It did cut with no effort a 1" thick T6 aluminum. I am not sure if if can do thicker as I did not try it. I also cut 1/2 mild steel bar with no problem at all. No binding or stalling. All the cuts of wood or metal were straight. You just have to let the blade do the work and not force feed it through
Question:	Where is it manufactured
Answer:	There's a tiny island off the north west coast of Mauritius called Gelff. Not even on most maps. Discovered by captain James Cook in 1752. In 1754 Gelff, represented by James Cook in Spanish courts, was granted sole manufacturer of the WEN 3962 Two-Speed benchtop bandsaw. Raw materials are brought in on one side of the island. Some kind of assembly/manufacturing factory must be inland somewhere, they don't allow access to the interior. The fact that this is such a fine product becomes obvious when one visits the far side of Gelff, where cargo ships are waiting to load and deliver this product around the world.

Product features

WEN Two-Speed 10-Inch Bandsaw with Stand

Remember when power tools were actually powerful? With a 3.5-amp motor and a 9-3/4 inch throat, the WEN 10-Inch Two-Speed Band Saw will glide through boards with cuts up to six inches deep. This saw uses 72-inch blades anywhere from 1/8 to 1/2 inches in size for both intricate and powerful cuts. The spacious work table measures in at 14 x 12-1/2 inches in size and can be swiveled up to 45°. Two-speed operation allows for speeds of either 1520 or 2620 FPM. Ball-bearings give the 10-inch wheels smooth operation and a long life for years of dependable service. The easy-to-assemble stand elevates the band saw without sacrificing space on the shop's work bench.

3-in-1 Dust Port

The WEN Band Saw includes a 3-in-1 Dust Port to fit a variety of dust collection hose sizes (1-3/4, 2-3/4, 4 inches).

Two-Speed Operation

Run the blade at either 1520 or 2620 feet per minute to meet the needs of any given project.

Variety of Blade Options

Use 72-inch blades anywhere from 1/8 to 1/2 of an inch in size depending on the intricacies needed.

Bevel Cuts from 0° to 45°

Create angled cuts up to six inches in depth by beveling the 14-1/8 x 12-1/2-inch table up to 45° to the right.

Equipped with a full 6 inches of resaw capacity

Remember when you could cut wood up to 6 inches thick in a single pass? The WEN 10-Inch Two-Speed Band Saw provides you the capacity to attack boards up to six inches thick. Combine this with the 9-3/4-inch throat for a machine that can take on more wood than other 10-inch band saws.

Packed with additional accessories

The WEN Band Saw includes a flexible worklight to illuminate your work piece, a sturdy fence for creating straight cuts, a miter gauge to cut along specific angles, a 3-in-1 dust port to meet the needs of a variety of dust collection hoses, and a 25-inch stand to keep the band saw elevated.

Product description

Remember when you had a saw that was both compact and powerful? The WEN 9-Inch Benchtop Band Saw attacks boards with cuts up to 3-1/2 inches deep and 9 inches wide. The 2.5-amp motor rotates the included 1/4-inch blade at up to 2500 feet per minute. The design of this saw uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in width for both intricate and powerful cuts. The spacious work table measures in at 12-1/4 x 11-7/8 inches in size and can be beveled up to 45 degrees. This package includes a miter gauge, an onboard 2-1/2 inch dust port, a fence for creating straight cuts, and an adjustable blade guard. Ball-bearings give the blade smooth operation and a long lasting life for years of dependable service. And because it’s a WEN product, your WEN 9-Inch Benchtop Band Saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly and helpful customer phone line all to make sure you remember WEN.

• 2.5 amp motor rotates the blade up to 2500 feet per minute
• Create cuts up to 3-1/2 inches deep and 9 inches wide
• Uses 59-1/2 inch blades anywhere from 1/8 to 3/8 inches in size
• Spacious 12-1/4 x 11-7/8 inch work table bevels up to 45 degrees
• Includes a 1/4-inch-wide blade, a 2-1/2 inch dust port, a rip fence, a miter gauge and a two-year warranty

User questions & answers

Question:	What are the table dimensions
Answer:	The table is 12" by 12".
Question:	Can this cut schedule 40 stainless steel 304L pipes
Answer:	I wouldn't, the cuts wouldn't be that great and you would burn out the motor on the saw
Question:	will saw make sharp turns
Answer:	If you install a smaller blade it will turn almost as sharply as a scroll saw. I have a 1/4" blade and it can turn perhaps a 3/4" radius OK.
Question:	Do i need to purchase saw blades
Answer:	The saw ships with one wood blade. I purchased an extra finer tooth blade and a metal cutting blade. good to have an extra in case the one you are using breaks.

Product description

Remember when you brought those old jagged boards back to life. The WEN 13 in. 3-Blade Benchtop Thickness Planer repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15 Amp motor provides over 25,500 cuts per minute at a 26 ft. per minute feed rate. Plane boards up to 13 in. W and 6 in. T with ease. The onboard planning gage helps inform users about the amount of material being removed during each pass. Combine that with the heavy-duty cast iron base for a sturdy planer that does not walk or wobble during operation. The handy depth adjustment knob varies each pass to take off anywhere from 0 in. to 3/32 in. of an inch. The fan-assisted dust port removes chips and sawdust from the workpiece and blasts them out of the way. This package also includes height-adjustable infeed and outfeed tables to limit snipe while providing extra support to your workpiece during planning. Easily mount the planer to a work surface or stand using the predrilled base holes. Repurpose old wood or make a set of boards flush with the WEN 13 in. 3-Blade Benchtop Thickness Planer. And because its a WEN product, this planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods. Remember WEN.

• Onboard material removal gauge informs users about the cutting depth of each pass
• Plane boards up to 6 in. T and 13 in. W
• 15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
• 3-blade design makes easy work out of even the hardest of woods
• Fan-assisted dust port removes sawdust from workpiece

User questions & answers

Question:	how much tax money we have to pay ? @ how much money the shipping will cost
Answer:	if you have amazon prime shipping is usually free on items like this. i think you pay tax at the rate of where its coming from but you need to do further checking on that.
Question:	How thin can I plane a piece of wood down to with this planer
Answer:	Down to 1/8” is possible. Working down in very shallow increments. A little less than 1/8” if you run the wood through planer attached to an auxiliary scrap piece of wood. A piece of plywood maybe .
Question:	What is the size of infeed/outfeed table
Answer:	Table Size 13-1/4 in. x 9-1/2 in. https://m.media-amazon.com/images/I/C17Wys9ylFS.pdf
Question:	Does this planer have a standard 110 plug
Answer:	YES, it is a standard 3-prong 110 plug.

Product features

Tri-Roller Feeding System & Reversible Blades

The WEN Thickness Planer uses a tri-roller feeding system to help minimize snipe. The three dual-edged blades on the middle roller can be reversed to help elongate their life cycle and ensure sharp cuts.

Fine-Tune Depth Adjustments

Easily adjust the height of your planer with the comfortable rubber-grip adjustment handle. Each quarter rotation adjusts the height of the cutter head 1/64 of an inch for maximum precision during operation.

Infeed and Outfeed Tables

Foldable infeed and outfeed tables add support to longer workpieces traveling through the planer. Both tables can be adjusted to get the perfect angle for smoothly feeding boards for smoothly feeding boards and fighting snipe.

Dust Hose Connection Port

Attach a dust extraction device or a wet/dry vac to the handy 2 inch, 2-1/2 inch, or 4 inch fan-assisted dust port adapter to minimize cleanup. Keep all of the sawdust and shavings in one place instead of all over the workshop floor.

Product description

Remember when you could move your tools freely around the wood shop? Get the most out of your work space with the WEN Heavy Duty 500-Pound Capacity Universal Mobile Base. With two fixed casters and two swivel casters, this versatile dolly is the perfect companion for band saws, table saws, tool chests, gun cabinets, safes, lathes, planers, jointers, drill presses, sanders, and more. This versatile mobile stand fits both rectangular and square bases. The square configuration adjusts from 11.8 by 11.8 inches up to 35.4 by 35.4 inches in size while the rectangular configuration goes all the way up to 51.2 by 19.7 inches. Ball bearings inside of the wheels provide smoother travel and a longer lifespan when compared to other mobile bases available on the market. Foot-locking brakes prevent users from needing to bend down to lock and unlock the stand. Plus, our compact design minimizes the base’s invasiveness, increasing the height of the tool by a mere 7/8 of an inch. And, because its a WEN product, your mobile base comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line. Remember when your tools could easily roll wherever you wanted them? Remember WEN.

• Turn your stationary tools into mobile machines, helping you to get the most out of your work space
• Perfect for band saws, table saws, tool chests, cabinets, safes, planers, sanders, jointers, drill presses and more
• Fits square base configurations anywhere from 11.8 by 11.8 inches up to 35.4 by 35.4 inches
• Fits rectangular bases up to 51.2 by 19.7 inches in size
• Features two fixed casters, two swivel casters, two foot-locking brakes, and a two-year warranty

User questions & answers

Question:	What size are the wheels
Answer:	Wheels are 2 7/8” in diameter. It’s as close as I could get with my tape measure.
Question:	Will this fit a 29 x 33 upright freezer weights 150-200 lb
Answer:	I believe it will, but this is an expensive base for q freezer. I would two moving dollies from Harbor Freight would be a better and cheaper solution for a freezer.
Question:	what material are the wheels made from
Answer:	They are made from a hard plastic material. They are solid and seems as though they will last a long time. The "axle" of the wheel appears to be a stainless steel rod, which is pretty solid. I am a retired contractor who likes " heavy duty" products. This product is of a level of quality that pleased me.
Question:	When will this ship? It was listed as Prime and one day shipping
Answer:	slowed due to new policy

Product description

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Variable speed goes from 400 to 1600 strokes per minute
• Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

User questions & answers

Question:	Is the pinless adapter upgraded in this model
Answer:	Yes
Question:	What’s the difference between this and the
Answer:	The difference is toolless or tooled blade changes. That's the only difference I found in the 2 units.
Question:	What blades are you all using
Answer:	I use spiral blades which, unlike regular flat blades, you can cut by pushing and pulling your piece being cut.
Question:	I am new to scroll saws so have to ask. Is it worth the $40 difference in price for the 3921 over the 3920 and why
Answer:	this model(3921) replaces the 3920, they added a few features and the pinless clamps to the mix. the price difference is for the design changes and the extra pieces they add. 3921 is better than the 3920 when you count in the extra features.
Question:	does it come with sand paper
Answer:	Ours didn't. But just cut a full sheet in half and half again. Love how well it works.
Question:	is it ok to use on an old desk? I am concerned about the circar pattern of this sander, I won't be able to follow the grain of the wood
Answer:	It's a small orbit, about 1/16", like a vibration. For $30 give it a try. If you use fine paper on the last pass and move the sander in the directionof the grain, should be ok. I think it's agreat little tool.
Question:	What about the cutted sections in the sandpaper
Answer:	Hi, Put the sandpaper section on the sander. The sander came with a black square item that has spikes. Push the sander over the spikes and the holes in the sandpaper will appear. Also the holes are only needed if you want to collect the dust in the bag. I do not use the collection bag.
Question:	Where do I find refills online for the 1/4 sheet
Answer:	What is "Full Sized Sheet"? , I see 8 1/2 x 11 and 8 x 10.

Product features

BLACK+DECKER BDEQS300 1/4-Sheet Orbital Sander

The BLACK+DECKER BDEQS300 1/4-sheet orbital sander is ideal for finish sanding and detail work around the house. This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal. This sander offers high-performance dust collection to provide a clean work surface.

Versatile

This sander runs at 1,600 orbits/minute with 2.0 amps of power for efficient material removal.

Convenient

This sander features paddle switch activation for easy on/off during application.

Ergonomic

With a compact size and ergonomic design, this sander can get into tight spaces and maximizes user control.

Efficient

Ideal for detail work and finish sanding, this sander also offers high-performance dust collection to provide a clean work surface.

Beveling Table

The spacious table features a 16-inch depth for cutting large workpieces and bevels up to 45 degrees to the left.

Blade Variety

Whether your preference is pinned or pinless blades, the WEN 16-inch Variable Speed Scroll Saw handles them both.

Variable Speed

Variable speed can be adjusted anywhere from 550 to 1600 strokes per minute with the simple turn of a knob.

Flexible Worklight

The flexible worm work light can be adjusted and moved to illuminate workpieces of any shape and size.

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 40 carbide-tipped teeth for general-purpose wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

Product description

Remember when you could adequately support both your miter saw and your work piece? With the WEN Collapsible Rolling Miter Saw Stand, you’ll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stand’s body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because it’s a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Universal design fits nearly every miter saw on the market, including all WEN miter saws
• Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
• Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
• Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long
• Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty

User questions & answers

Question:	After the saw is mounted on the brackets can it then be removed fromt he stand quickly for storage
Answer:	Yes There are two bars with handles that are attached to the bottom of the saw with bolts (you can see them in the picture). You put the saw&bars&handles assembly on the stand's horizontal tubes, slide the assembly where you want it on the tubes, and rotate the handles down to lock it into place To remove the saw from the stand, you just rotate the handles up and lift the saw&bars&hanles assembly off the stand. I assume that you would store the saw with the bars&handles attached for easy replacement onto the stand. To remove the bars&handles from the saw, you'd have to remove the bolts.
Question:	Basic stand question. Some answers say 29" top, some say 33. Whiich is it for the stand without wheels
Answer:	29 inch. Add 3 in for the saw.
Question:	Can anyone tell me, what is the exact height (ground to top surface) of the miter saw mounting brackets
Answer:	Yeah, I get about 29 inches when I measure . That is not really that high for a miter saw stand.
Question:	Will a dewalt 779 work on here
Answer:	Yes it does. That is the saw I have mounted to the stand.

Product description

Remember when you had a smooth cut with no tearout? The WEN 12-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 1-inch arbor allows for compatibility with the majority of 12-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.6 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
• Designed with 80 carbide-tipped teeth for fine-finish wood cutting
• Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

User questions & answers

Question:	Will this work with a dewalt dws
Answer:	I have a Dewalt 705 and works fine, as long as your arbor is the same

Product description

WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw

Remember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.



OLSON SAW FR49501 Pin End Scroll Saw Blade,18 Pack

For machines that require 5" Pinned blades. Perfect for Sears Craftsman, Penn state, Delta, Ryobi, all 15" And 16" Imported scroll saws. Contains 6 each of 42401, 41101, & 41201. Blister carded assortment. 18 Pack contains 6 each of 42401, 41101, & 41201 for machines that require 5" Pinned blades Perfect for Sears Craftsman, Penn state, Delta, Ryobi, all 15" And 16" Imported scroll saws # 42401 - 0.070 wide, 0.010" Thick, 18.5 TPI & cuts in wood, plastic and extremely thin cuts in material 3/32" To 1/2" Thick # 41101 - 0.100 wide, 0.018" Thick, 15 TPI & Wallboard, Pressed wood, wood, felt, paper, Bone, lead # 41201 - 0.100 wide, 0.018" Thick, 10 TPI & for hard/soft wood and plastic blister carded assortment.

• Product 1: Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
• Product 1: Variable speed goes from 400 to 1600 strokes per minute
• Product 1: Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
• Product 1: Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
• Product 2: The product is Easy installation and easy handling
• Product 2: The product is manufactured in USA
• Product 2: The product is easy to use and highly durable
• Product 2: Cuts in hard/soft wood and plastic

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Fine-Finish Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 60 carbide-tipped teeth for fine-finish wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

User questions & answers

Question:	Could this be used for a Craftman 10" radial arm saw
Answer:	I don’t see why it wouldn’t

Product description

Remember when you had a smooth cut with no tearout? The WEN 10-Inch Professional Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 5/8-inch arbor allows for compatibility with the majority of 10-inch miter saws, jobsite saws, and table saws on the market. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.4 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
• Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting
• Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws

Product description

Remember when you had a smooth cut with no tearout? The WEN 12-Inch Professional Woodworking Saw Blade provides reliable and accurate performance, maintaining its straight shape and sharp edges for longer than the competition. The machine-cut carbide-tipped teeth slice through woods of any kind, making easy work out of pine, oak, poplar, cherry, maple, walnut, and more. The 1-inch arbor allows for compatibility with the majority of 12-inch miter saws, jobsite saws, and table saws on the market. Heat expansion slots help the blade expand and contract as needed to provide maximum accuracy across a wide range of cutting conditions. Our unique protective coating fights off potential damage caused by heat, rust, corrosion, gumming, resin, and more. This lightweight, ultra-thin blade provides maximum efficiency during operation, leaving behind a kerf a mere 1/10 of an inch wide (2.6 mm). It’s time to get reliable and powerful performance with a WEN Saw Blade. Remember when you had a blade that lasted? Remember WEN.

• Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
• Perfect for slicing through both hard and softwoods of all kinds
• Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
• Designed with 48 carbide-tipped teeth for general-purpose wood cutting
• Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws

Product description

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you’ll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. The sanding disc is accompanied by a sturdy cast-aluminum work table. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. And because this is a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled experienced technicians, and a helpful customer service line all to make sure that you remember WEN.

• Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
• Belt tilts anywhere from 0 to 90 degrees
• Sturdy cast iron base prevents any heavy vibrations
• 4.3 Amp motor provides up to 3600 RPM
• Tension release lever provides for simple changes between sandpaper grits

User questions & answers

Question:	Are there finer grits avaialable than the 80 that comes with it
Answer:	You can get belts all the way up to 4000 grit with no problem.
Question:	Which is best all around novice machine, the 6502T or 6500 (both Wen
Answer:	I have the 6502t works like the boss , great product
Question:	Does the unit come assembled
Answer:	Yes, it comes mostly assembled. You have to put on the table for the disk and possibly the disk and belt.
Question:	Could this be used to smooth cut glass bottles
Answer:	You could use any sander as long as you use glass grinding belts

Product features

WEN 4 x 36-Inch Belt Disc Sander

Remember when you needed a versatile and reliable sander? The WEN Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4.3 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch sanding disc, you'll have the capacity to sand whatever work piece your heart desires.

Heavy-Duty Cast Iron Base

The sturdy cast iron base prevents wobbling and walking, ensuring the sander stays in one place while you're sanding.

Adjustable Belt

Tilt the belt from a horizontal to a vertical position or anywhere in between depending on the needs of your project.

Dust Collection Port

Attach your favorite dust collector to the 2.5-inch dust port to minimize clean-up of saw dust and debris in your workshop.

Table with Miter Gauge

The sanding disc is accompanied by a support table equipped with 0 to 45° beveling capabilities and a removable miter gauge.

Product description

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools. The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount for accessible dust collection whenever you need it. Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221). And because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.

• 5.7-amp motor moves over 660 cubic feet of air per minute
• 4-inch dust port allows for connection to your favorite woodworking tools
• Four swivel casters lock in place to prevent unwanted movement during operation
• Compact design features onboard carrying handle for easy storage and transportation
• Mount the unit to the wall of your shop for accessible dust collection whenever you need it

User questions & answers

Question:	Louder or quieter than a shop vac? my shop is located underneath my infant sons room and i've dampened my cnc machine to run it at night
Answer:	Don't know, but it's quieter than my table saw.
Question:	what is the dbA noise raring for the WEN
Answer:	№15 art.3401-015 Hex Head Bolt 9st.
Question:	dimensions of the motor housing to frame mounting-bolts? considering shock mounts and certain specifics are needed to order them... thanks
Answer:	The bag, when inflated, makes the entire unit about 38" long. It's also about 15" tall. I also use it under cabinet and so far it's worked out well.
Question:	What are the rough dimensions of the filtration bag? I'm looking to incorporate this into my cabinet
Answer:	Hi dear Amber Burton, Our engineer guarantees that wood sanding is an easy job for this drywall sander. So yes, we can do it. And if you suffer quality issues because of wood sanding, pls contact us , and we guaranteed that we can offer you a new machine. By the way, pls take care of yourself and wear the necessary PPQ(Personal Protection Equipment) during wood sanding.

Product features

WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount

Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools.

The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop's wall with the optional built-in wall mount for accessible dust collection whenever you need it.

Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221).

Features

- 5.7-amp motor moves over 660 cubic feet of air per minute

- 4-inch dust port allows for connection to your favorite woodworking tools

- Four swivel casters lock in place to prevent unwanted movement during operation

- Compact design features onboard carrying handle for easy storage and transportation

- Mount the unit to the wall of your shop for accessible dust collection whenever you need it