11 best dust extractor for small workshop

Product description

Compact but large. Light but powerful. Whether it's used on the construction site or in the workshop, thanks to its huge container capacity of 26 L, the cleantec CT 26 provides maximum volume with compact dimensions. Equipped with swiveling castor wheels and rear wheels for optimum mobility. It also has a locking brake that provides stability on any surface as well as during transport. The Flat filter fully integrated in the suction head ensures the full volume is utilized: this means that the Gross and net container volumes are virtually identical. The extremely compact high-performance turbine provides the right suction power. The CT 26 is a good choice for the shop or the jobsite for all your power tool extraction and clean-up needs. A HEPA filter comes standard and offers the ultimate in clean air and Filtration. A 137 CFM (3900 L/Min) volume flow means that nothing remains except clean air. Carries full unit HEPA certification.

• Constantly high suction because of the compact high performance turbine
• Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor
• Economical because of the optimal use of the available volume with a selfclean filter bag in the container
• Maximum utilization of the container volume – the gross volume is the same as the Net volume
• Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.Anti-static 11-1/2 foot hose

User questions & answers

Question:	How long is the hose
Answer:	The vacuum hose is 140 inches long plus couplings on either end.
Question:	When used as a wet vac do you need to remove the hepa filter
Answer:	Yes, there is a wet filter to use when wet pick up is required.
Question:	Is this the newest version
Answer:	Yes, it is!
Question:	Is it terribly fragile? the specs say "item weight 1 pounds" is it really that light? If not, what is the weight
Answer:	I suspect that the description weight is for the filter bag only. The entire unit weight is probably near 50 lbs. I have not weighted mine. It rolls easily. I really like the feature that allows me to lock the FESTOOL cases for the saw, sander, and others on top of the vacuum and roll them around. The size of this unit is also very convenient in my small shop. I am not a professional but just use it at home.

Product description

The Bosch 300-CFM Dust Extractor delivers the high-performance cubic-feet-of-air-per-minute (CFM) rate for maximum dust extraction for heavy-duty concrete construction applications such as concrete cutting and surface grinding. The dust extractor’s powerful 17.5 Amp motor delivers a maximum 300 CFM, and it is designed to help users move toward compliance with the OSHA Silica Table 1 dust compliance regulation. The automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included three-layer heavy-duty filter bag helps to protect the filter and provides the optimal containment of dry dust. It also provides wet/dry operation, with a water-level sensor and drain hose. The extractor features a wheeled metal frame with dumping mechanism, metal castors and a height-adjustable push handle. This unit includes a 16 Ft. 35mm anti-static hose and 27 Ft. power cord with standard 20 Amp plug. When used with the optional Y-Connect (sold separately), the dust extractor can be hooked up to two tools (such as small angle grinders when used in grinding or cutting concrete).

• Part of Bosch PRO+GUARD – helps users move toward OSHA Silica dust compliance
• Impressive 300-cfm air-flow capability – features high-performance CFM for maximum dust extraction in heavy-duty concrete construction applications
• Powerful 17.5 amp motor – delivers strong extraction performance for extreme commercial applications
• Automatic filter cleaning – cleans filter every 15 seconds for consistent suction power
• Three-layer heavy-duty filter bag – helps protect the filter from abrasive materials and provides the optimal containment of dry dust and debris
• Wet/dry operation with water-level sensor and drain hose – Sensors automatically prevent overfilling and hose provides easy drainage
• Wheeled metal frame with dumping mechanism – offers easy transporting, stability and emptying convenience

User questions & answers

Question:	Can you use different bags(plastic to save money
Answer:	I use one and it works very well. I do a lot of Sanding on a 19-38 drum sander and haven’t t had to change the bag in months with the cyclone. Only the smallest particles goes to the bag. Couldn’t be happier with the vac and cyclone together.
Question:	How well would this work hooked up to a walk behing concrete grinder? Would it also work well on woodworking dust
Answer:	It does. It does extremely well. Every 15 seconds it blows back to clear the filter.

Product features

BOSCH GAS20-17AH 17-Gallon 300-CFM Dust Extractor with Auto Filter Clean and HEPA Filter

The Bosch 300-CFM Dust Extractor delivers the high-performance cubic-feet-of-air-per-minute (CFM) rate for maximum dust extraction for heavy-duty concrete construction applications such as concrete cutting and surface grinding. The dust extractor’s powerful 17.5 Amp motor delivers a maximum 300 CFM, and it is designed to help users move toward compliance with the OSHA Silica Table 1 dust compliance regulation. The automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included three-layer heavy-duty filter bag helps to protect the filter and provides the optimal containment of dry dust. It also provides wet/dry operation, with a water-level sensor and drain hose. The extractor features a wheeled metal frame with dumping mechanism, metal castors and a height-adjustable push handle. This unit includes a 16 Ft. 35mm anti-static hose and 27 Ft. power cord with standard 20 Amp plug. When used with the optional Y-Connect (sold separately), the dust extractor can be hooked up to two tools (such as small angle grinders when used in grinding or cutting concrete).

Product description

Dust control is an integral part of the Festool system and design philosophy. That is why the CT 36 AutoClean is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. A small detail sander may not require the full 137 CFM of this unit, but a router may require it. This unit comes standard with an automated fitler cleaning mechanism that prevents fine dust from clogging the filter which reduces suction. We further optimize efficiency with the low-profile, flat-top design that allows the CT top to double as a tool rest as well as an integrated hose garage and docking station that allows the connection of Festool Systainers (not included) for easy transport and storage. The low center of gravity, integrated center handle, and extra large wheels make navigating rough terrain in the shop or jobsite easy without tipping over. A parking brake can even be locked to prevent unintentional roll off or drifting. The supplied 11-1/2 ft. 36mm anti-static (AS) hose is long enough for power tool and general work site clean up tasks and is designed to be ultra flexible and lightweight. With an industrial design for heavy use the CT is equipped with over 24 feet of 12 gauge cord. A cord wrap is supplied to attach to the rear of the unit. With 137 CFM and only 62 dB (on the low setting), the CT 36 can quickly and quietly remove large amounts of debris, with minimal noise. A high performance 1-micron filter comes standard and offers the ultimate in clean air and filtration. The CT 36 AutoClean is specifically designed to complement the PLANEX Drywall Sander but can also be used as a general dust extractor for all tools.

• Automatic filter cleaning technology ensures maximum suction when used with Planex Drywall Sander
• Automatic Tool Start and adjustable suction with tool triggered or manual on-off switch and infinitely variable suction force, can be used wet or dry
• Supplied with lightweight 11-1/2 foot long anti-static hose that is flexible and kink-resistant
• Sys-dock and hose garage feature allows for the storage and transport of Festool Systainers
• Large wheels, low center of gravity, and ergonomically balanced design

User questions & answers

Question:	Is the supplied hose the same as replacement hose 496972? That's a black hose, anti-static, that has a special collar for locking to Planex
Answer:	Yes Absolutely. And the vacuum can be used alone as well. You will love it!
Question:	can i use other festool tools with this vacuum
Answer:	I use this Festool strictly for sanding and dust extraction.
Question:	How suitable is this for use as a general purpose shop-vac? or is it only good for dust extraction
Answer:	I don't see why it shouldn't. I have owned both the pc7800 and the festool dustless sander, depending on how much you use the sander, the festool really isn't worth the extra money.
Question:	Can I hook my pc7800 to this? Atleast temporally until I pick up the festool drywall sander
Answer:	Stainless Steel

Product description

Large dust volumes? not a problem! thanks to its huge container capacity of 48 L, the CT 48 is ideal for the workshop and provides maximum volume thanks to its large container geometry. It is also highly Mobile thanks to its swiveling castor wheels, rear wheels and handle. It also has a locking brake that provides stability on any surface as well as during transport. The Flat filter fully integrated in the suction head ensures the full volume is utilized: this means that the Gross and net container volumes are virtually identical. The extremely compact high-performance turbine provides the right suction power. A 137 CFM (3900 L/Min) volume flow means that nothing remains except clean air. Carries full unit HEPA certification.

• Constantly high suction because of the compact high performance turbine
• Smooth suction hose and optimized sys-dock with cord holder and t-loc function for conveniently connecting Systainer to the mobile dust extractor
• Economical because of the optimal use of the available volume with a selfclean filter bag in the container
• Maximum utilization of the container volume – the gross volume is the same as the Net volume
• Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.

User questions & answers

Question:	is this the automatic filter version
Answer:	Bag and hose are included.... I can’t remember the hose size ..... might be 10’ and it will fit all festool tools
Question:	Is Included hose ? which size ? and filter bag
Answer:	check the festool website for the exact diameter of the hose. I use it frequently with my dewalt orbital and it works great.
Question:	What's the diameter of the hose? Can it fit on a Dewalt palm sander
Answer:	I wouldn’t use this for post construction cleaning except for wood dust on a shop floor . I’d get a shop vac for that . Great product for Festool saws, domino’s and other handheld tools
Question:	Would this be good for post-construction cleaning
Answer:	Yes, The black hose 496972 comes with the CT 36 AC.

Product description

The Bosch VAC140AH 14-gallon dust extractor with auto filter clean and HEPA filter provides a complete package that is designed to help users move toward compliance with the OSHA silica dust regulation. The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 in. Static water lift (maximum). the automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included fleece filter bag helps to protect the filter and provides the optimal Containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a power broker dial to match the suction force to application.

• AUTO-CLEANING: With automatic filter cleaning, the Bosch VAC140AH dust extractor cleans the filter every 15 seconds to help maintain maximum suction power
• PERFORMANCE: The included HEPA filter caputres 99.97% of particles at 0.3 microns or larger while the included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris
• OSHA COMPLIANT: Featuring Bosch PRO+GUARD, an end-to-end dust collection system to help users move toward OSHA Silica Table 1 dust compliance
• POWER: With strong airflow and suction power, the Bosch VAC140AH dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable maximum 97 in. static water lift
• COMPATIBLE: With power tool activations users can utilize power tool's switch to turn vacuum on and off. The Power Broker dial will match the suction force to application

User questions & answers

Question:	Can this be used with any brand of power tool, or only Bosch brand? Thanks
Answer:	I’ve never had any line noise or popping using optical. That is via a TV not computer but can’t imagine it would be different. The only popping I’ve ever had was if the power was pulled from the unit and then plugged back in while the volume was up but you shouldn’t ever need to unplug it, it doesn’t run hot or draw power when the switch is off.
Question:	Does anyone use a cyclone with one of these? If so, does it help much
Answer:	It is 110v.
Question:	Does the auto clean filter actually work
Answer:	There is a join in and out on the back of the unit. You could connect all 3 that was. You would just use a 1/4 cable between each unit. Thank you Kim at The Recording Store
Question:	Is there a benefit to using a hepa filter (given that you cant use auto clean with it) over using std. filter with fleece bag, and auto cleanAfeature
Answer:	You really should get 2. It all depends on what ohm your headphones are. But 20 is probably too many. Buy 2 and link them together.

Product features

Bosch 14 Gallon Dust Extractor with Auto Filter Clean and HEPA Filter VAC140AH

The Bosch VAC140AH 14-Gallon Dust Extractor with Auto Filter Clean and HEPA Filter provides a complete package that is designed to help users move toward compliance with the OSHA silica dust regulation.

The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 In. static water lift (maximum). The automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger.

The included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a Power Broker dial to match the suction force to application.

Product description

The 11 Gallon Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210L) is a best-in-class solution for dust extraction in concrete and woodworking applications. The VC4210L is powered by a 12 AMP motor that generates 148 CFM of suction power and 92” of water lift to take on the most challenging applications. Designed with contractors in mind, the VC4210L combines power with less noise and less weight in a smaller footprint and is ideal for indoor and room-to-room applications. The motor chamber is constructed of quality sound-absorbing materials, delivering an operating sound level of only 60 dB(A). In addition, precision lightweight motor components and more efficient air ducting allowed Makita engineers to reduce the weight to only 35 lbs. For increased stability and easier maneuverability, the VC4210L has wide-set rear wheels and enlarged steel caster front wheels, which creates a lower center of gravity. The VC4210L features innovative Automatic Filter-Cleaning System and an efficient two-stage filtration system with main Nano filters engineered to maximize the container volume and improve efficiency, while capturing 99. 95% of particles size 2 microns and larger. The Certified-HEPA main filter captures 99. 97% of particles size . 3 microns and larger, which meets or exceeds the Department of Energy’s standard for HEPA filters. An on-board tool-activated outlet starts and stops the vacuum/extractor with power tool usage. Included standard is a 13’ Anti-Static Hose, which is ideal for woodworkers in a shop environment. It’s part of Makita’s expanding range of dust extraction solutions.

• Powerful 12 AMP Motor Generates 148 CFM of Suction Power and 92" of Water Lift
• Automatic Filter Cleaning System for longer filter life
• HEPA filter captures 99. 97% of particulates . 3 microns and larger
• Efficient two stage filtration system with main flat filter captures 99. 95% particles 2 microns and larger
• On-board tool-activated power outlet starts and stops vacuum with a 10 second "off" delay to clear any remaining debris

User questions & answers

Question:	Hi guys. What to buy to make this vac start remotely
Answer:	Aws receiver
Question:	country of origin
Answer:	This is made by Nilfisk. The only thing the Makita engineers did to this is to put the Makita label on it.
Question:	What is the plastic bag for? Water? Does it have multiple uses
Answer:	You can use the plastic bag to keep the canister clean and for tidier disposal. You don’t have to use the bag at all if you don’t want to. If you’re grinding concrete or have very fine dust, you should use felt filter bats, not plastic bags.
Question:	Can you disable the popping sound
Answer:	Yes, turn knob to continuous. I have had same bag in Vac for 2 months. I have had no need to have the blow cycle on. The filter is clean.

Product description

The cleaning set is ideal for use in the workshop. The D36 suction hose is the ideal connection for strong suction power. Use the crevice nozzle for places that are difficult to access. Comes in Systainer 5 t-loc. Includes: smooth suction hose D 36, Antistatic, curved hand tube D 36 hr-k as, stainless steel extension tube, industrial floor nozzle, in Systainer SYS 5 t-loc

• The cleaning set is ideal for use in the workshop
• The D36 suction hose is the ideal connection for strong suction power
• Use the crevice nozzle for places that are difficult to access
• You receive all these in a practical Systainer 5 t-loc

User questions & answers

Question:	What's the difference between this model and festool 203408 tradesman/installer cleaning set
Answer:	It has the braided sleeve, if that is what you mean.
Question:	Is this the new d36 hoses
Answer:	As far as I know, all festool vac hoses fit all festool vacs. This set has the larger 36mm diameter hose, but the fitting at the vac end is the same size as the hose that came with the vac.
Question:	Does this fit a ct midi usa hepa 120v r
Answer:	3.5 meters, = 11.48 feet from festoolUSA website. Same length as the standard hose that comes with the CT/midi/mini vacuums but bigger diameter.
Question:	How long (in feet) is this hose? thank you
Answer:	Yes
Question:	Will the low suction setting be sufficiently low for optimal performance of a Festool Orbital Sander
Answer:	Yes. Though it is cheaper to just get the bag filter for your rigid vac. I only take my expensive ct36 on job sites when it’s Hospital work and I don’t let just anyone use it because they are so expensive.
Question:	Will this vac work well for cleaning jobsites like the Rigid vacs? I need a vac that doesn't blow dust all over the place in residential situations
Answer:	Yes you can plug it the CT outlet, the dust hose might fit depending on your model.
Question:	Dose it connect with Dewalt sander
Answer:	This dust collector will do that, no Bluetooth module required. Just flip the dial to "auto". If you do get the Bluetooth module, you can ALSO use a wireless button to activate manual-on mode (useful to have at the end of your hose so you can quickly suck up dust after disconnecting from your tool without reaching for the vacuum body).
Question:	What is the Bluetooth function? I want a vacuum that turns on when the tool that is plugged into it turns on. Will this do that
Answer:	Peak HP: 1.85
Question:	How much horse power this vacuum have
Answer:	Make sure you think about the power requirements first. If you plan on using this vac and planer combo with the auto start-stop via the onboard port I would think again. This vac has a max draw of 11.6 amp during continuous use (more during startup). The planer is also a 15 amp unit, but in my experience draws about 12amp during planing operations. So, even if you have a 20 amp circuit you are probably going to trip the breaker when the vac kicks on. The onboard tool port works great for lower draw items like sanders though. Depending on how your house or shop is wired you may still have the same problem plugging into two different outlets if they are wired on the same circuit.
Question:	Will this unit fit a DW735X DeWalt planer out of the box
Answer:	I have two of the larger dwv012 units and they are amazing. 2 hepa filters, adjustable suction, back pulses filter every 30 seconds, don't have to stop and clean filter like shop vacs. Don't know about smaller unit. I needed the big ones because I do lots of concrete grinding. They work great. I'll never go back to a shop vac.
Question:	What is the main difference between this and dwv010 (smaller model)? what about between this and a regular wet/dry vac
Answer:	The OD on the hose (I just measured it) is 1.5". The hose is very long, which I guess could be a good thing but to me the narrow diameter and length really made the airflow poor. You could hardly use it as a vacuum, unless I put the hose end brush right on top of the dirt it wouldn't suck it up. I switched the hose to a 2.5 inch that I had sitting around, which fit fairly snugly over this connector thing they have at the vac opening (it is not a regular shopvac type hose, it is one of those collapsible hoses. My Rigid 2.5 inch hose would not quite fit the fitting on the vac canister. . The hose, and the vac canister itself, have these very bulky connectors that do not seal well and have only a narrow opening. I was very underwhelmed with the design and with the amount of suction. I had hoped to use this, inaddition to connecting to tools (for which it does work well) as a general shopvac, but it can't do that, so I still have to use the old Rigid vac which I had hoped to replace
Question:	what size is the hose and fittings
Answer:	Auto filter clean? No. The auto filter clean doesn’t carry the fully unit hepa certification from what I had read. It’s not necessary from my experience either.

Product description

The Bosch VAC090AH 9-gallon dust extractor with auto filter clean and HEPA filter provides a complete package that is designed to help users move toward compliance with the OSHA silica dust regulation. The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 in. Static water lift (maximum). the automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included fleece filter bag helps to protect the filter and provides the optimal Containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a power broker dial to match the suction force to application. Refer instruction manual before use.

• AUTO CLEANING: With automatic filter cleaning, the Bosch VAC090AH dust extractor cleans the filter every 15 seconds to help maintain maximum suction power
• PERFORMANCE: The included HEPA filter caputres 99.97 percent of particles at 0.3 microns or larger while the included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris
• OSHA COMPLIANT: Featuring Bosch PRO+GUARD, an end to end dust collection system to help users move toward OSHA Silica Table 1 dust compliance
• POWER: With strong airflow and suction power, the Bosch VAC090AH dust extractor delivers a maximum 150 cubic feet of air per minute rate (CFM), with a sustainable maximum 97 in. static water lift
• COMPATIBLE: With power tool activations users can utilize power tool's switch to turn vacuum on and off; The Power Broker dial will match the suction force to application

User questions & answers

Question:	Considering this unit or the new Milwaukee anyone familiar with the new Milwaukee dust extractor
Answer:	Sure, you can use it again.
Question:	What is the difference between the A and AH models
Answer:	Yes, this can fit for both men and women.
Question:	Can I run a miter saw off this vacuum
Answer:	Yes. It's safety for both adult and children.
Question:	Could I use this with a foot pedal type power supply when using battery operated tools? Ideally, is there a foot switch made specifically for this
Answer:	Mine was not advertised with the bag, nor did I receive one.

Product features

Bosch 9 Gallon Dust Extractor with Auto Filter Clean and HEPA Filter VAC090AH

The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 In. static water lift (maximum). The automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included fleece filter bag helps to protect the filter and provides the optimal containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a Power Broker dial to match the suction force to application.

Product description

Clean-ups just got easier with the Makita 18V X2 LXT (36V) Cordless 4 Gallon HEPA Filter Dry Dust Extractor. The Cordless Dry Dust Extractor (XCV15Z, tool only) offers maximum versatility and convenience. The Dry Dust Extractor is powered by two 18V LXT batteries for 36V power and run-time, without leaving the 18V LXT battery platform. Using two 18V 5. 0Ah batteries, the Dry Dust Extractor delivers up to 75 minutes of continuous run time on low setting and 40 minutes on high setting. The powerful Makita-built motor delivers 74 CFM and 39” water lift of suction on battery operation. The Dry Dust Extractor has a 3-stage filtration system engineered for efficient cleaning and to extend the life of the main filter. The system consists of a Pre-Filter Bag (captures larger dust particulates), Damper Filter (captures much smaller particulates) and Main Filter (captures micro particles). All three filter components are included. The Dry Dust Extractor is loaded with ease-of-use features, such as an oversized on-off switch, variable speed control dial, and dual L. E. D. battery indicators are clearly visible and easily accessible on the top and front of the vacuum. Additional features include quick-release metal latches, large rubber bumper, and rear casters with locking levers. It’s part of Makita’s expanding 18V LXT system, the world’s largest cordless tool system powered by 18V lithium-ion batteries. Makita 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact batteries with the Star symbol on the battery indicating Star Protection inside.

• Powerful Makita-built BL Brushless motor delivers 74 cfm and 39" Water Lift of suction using two 18V LXT Lithium-Ion batteries (batteries not included)
• Efficient three stage HEPA filtration system captures 99. 97% of particulates . 3 microns and larger
• Filter cleaning system is designed to maintain optimal suction efficiency and longer filter life
• Up to 75 minutes of continuous run time on low setting and 40 minutes on high setting using two 18V LXT Lithium-Ion 5. 0Ah batteries BL1850B (batteries not included)
• Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge

User questions & answers

Question:	can I plug into AC outlet with this
Answer:	The primary difference is that the tradesman/installer set has a small carpet nozzle. This model has the really heavy-duty and larger floor nozzle. There are a couple of other differences between the smaller cleaning tools that are included in each.

• Constantly high suction because of the compact high performance turbine
• Autoclean automatic main filter cleaning system with infinitely adjustable cleaning intervals for consistently high suction power
• Maximum utilization of the container volume – the gross volume is the same as the Net volume
• Can be individually Retrofitted with an additional compressed air or Bluetooth Module for remote control on the suction hose or automatic start via the Bluetooth battery pack.

User questions & answers

Question:	I have a bunch of floor tile mortar bed to grind. Would this self cleaning be good for the fine dust that creates
Answer:	Yes, I use the disposable plastic bags for drywall dust and HEPA filter bags for other things. Unsure what you mean by turning the ac off, but I remotely turn the CT36 on and off using a power strip plugged into an extension cord plugged into the CT36's AC outlet. A few clamp lights plugged into the power strip is all it takes for the CT36 to sense a power draw and turn on the vac. Flip the power strip power button off and the vac stops. Flip the power strip switch back on, the lights light up, the vacuum starts again.
Question:	Does the ct36 ac work well with disposable filter bags, and can the ac be turned off
Answer:	The Festool 574933 CT 36 AC Dust Extractor is designed to be used specifically with Planex Drywall Sanders. It comes with a 3.5m (11.5') 36mm hose, a 1 Micron high performance filter and a Selfclean filter bag.
Question:	Does it come with the things needed to run the planex easy
Answer:	The Festool 574933 CT 36 AC is designed specifically to work with the Planex Drywall Sander, and comes with a 1 micron high-performance filter that is optimized for self-cleaning but not HEPA-certified. The version of the CT 36 that comes with a HEPA filter is the Festool 574935 CT 36 E HEPA Dust Extractor.
Question:	Is this hepa vac
Answer:	No it only works on batteries

Product description

Efficient dust collection in your worship is crucial to not only the performance quality and life of your machines, but also workplace and personal safety and health.  RIKON offers a variety of dust collectors to address these needs.  Your choice depends on the types of machines you will be connecting them to, and the frequency of their use.  Their new 63-110 12-gallon dust extractor is their most portable model and is equipped with a top carry handle to easily transport it from machine to machine.  It also includes a wall mounting bracket, should you decide to mount it instead.  Key features include the following:  a 1.5HP motor that develops 142 CFM air flow; a 12-gallon capacity canister; and a convenient top on/off switch.  Included with this dust extractor is a 4" x 6.5' hose and two hose clamps, two 4" hose connector fittings, four hose fitting sets, a .5 micron filter cartridge, and five paper filters.  For DRY USE ONLY.  Features RIKON's 5-year manufacturer's warranty against defect in materials or workmanship.

• RIKON 63-110 12-Gallon Dust Collector features a top carry handle to carry it easily from machine to machine and a mounting bracket for mounting to your workshop wall.
• Motor: 1.5HP; 9.2AMP/1100W; 120V/60Hz; <95 dB sound level
• Filtration: .5 micron filter cartridge and five paper filters
• Hose: 4" x 6.5' with two hose clamps; two 4" hose connector fittings; and four hose fitting sets ranging in diameter from 1-1/8" to 4" to fit your machines.
• Comes with 5-year manufacturer's warranty against defect in materials and workmanship.

User questions & answers

Question:	The collector needs bags or any other disponsable ítem? Thanks
Answer:	I don't know the answer in cubic feet. I do know it does not work very well and all and I am complete dissatisfied with the product.
Question:	How much air can this extractor move? if possible could the answer be given in cfm (cubic feet per minute
Answer:	directly to individual machines - no need for shop vac
Question:	Doe athia hook up to.shop vac or individual machines
Answer:	Yes, this unit will pick up the dust from that grinding operation very easily, you just need to occasionally clean the cartridge filter inside the extractor. I just simply remove the cartridge and tap it lightly on a garbage can (outside if possible). Further utilizing the plastic bag vacuum bags works very good. This unit has superior suction and emits zero dust!!!!!!