14 best miter saw stand

Product description

Remember when you could adequately support both your miter saw and your work piece? With the WEN Collapsible Rolling Miter Saw Stand, you’ll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stand’s body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because it’s a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.

• Universal design fits nearly every miter saw on the market, including all WEN miter saws
• Collapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
• Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
• Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long
• Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty

User questions & answers

Question:	After the saw is mounted on the brackets can it then be removed fromt he stand quickly for storage
Answer:	Yes There are two bars with handles that are attached to the bottom of the saw with bolts (you can see them in the picture). You put the saw&bars&handles assembly on the stand's horizontal tubes, slide the assembly where you want it on the tubes, and rotate the handles down to lock it into place To remove the saw from the stand, you just rotate the handles up and lift the saw&bars&hanles assembly off the stand. I assume that you would store the saw with the bars&handles attached for easy replacement onto the stand. To remove the bars&handles from the saw, you'd have to remove the bolts.
Question:	Basic stand question. Some answers say 29" top, some say 33. Whiich is it for the stand without wheels
Answer:	29 inch. Add 3 in for the saw.
Question:	Can anyone tell me, what is the exact height (ground to top surface) of the miter saw mounting brackets
Answer:	Yeah, I get about 29 inches when I measure . That is not really that high for a miter saw stand.
Question:	Will a dewalt 779 work on here
Answer:	Yes it does. That is the saw I have mounted to the stand.

Product description

The DEWALT DWX724 compact miter stand has a universal design that works with all brands of miter saws. Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite. The 40-Inch beam extends to support up to 10-Feet of material and up to 500 lbs. Legs provide superior support and fold for easy storage and Leg Lock Levers allow for fast and easy set up. Tool mounting brackets allow easy and secure mounting of miter saw to the stand. The work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet on tool mount will not scratch material. Miter saw not included.

From the Manufacturer

The DEWALT DWX724 compact miter stand has a universal design that works with all brands of miter saws. Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite. The 40-Inch beam extends to support up to 10-Feet of material and up to 500 lbs. Legs provide superior support and fold for easy storage and Leg Lock Levers allow for fast and easy set up. Tool mounting brackets allow easy and secure mounting of miter saw to the stand. The work stops/supports can be repositioned quickly anywhere along the rail. Non-marring feet on tool mount will not scratch material. Miter saw not included.

• Universal design works with all brands of miter saws
• Compact design allows easy transport and storage.
• Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
• 40-Inch beam extends to support up to 10 feet of material and up to 500 lbs.
• Legs provide superior support and fold for easy storage. Extended Tool Height 32 inches,Extended Tool Width 100 inches,Folded Tool Height 8 inches,Folded Tool Width 44 inches
• Tool mounting brackets allow easy and secure mounting of miter saw to stand

User questions & answers

Question:	Are the work supports height adjustable so that you can extend material beyond the stop for longer stock and still have it level with the saw platform
Answer:	Yes, the supports extend out and are height adjustable. The material stops flip up or down without effecting the height of the support.
Question:	are the saw mounting brackets included
Answer:	The saw mounting brackets and the work stops are included with the stand. They are easy to attach to your saw. Attaching the saw to the stand takes a little strength unless you have long arms. But the stand is fabulous once everything is attached
Question:	What is the best way to place and remove a large mitter saw on this stand. I purchased it last year and placing and removing a heavy saw is a nightma
Answer:	Push ups
Question:	Does this stand come with the 2 yellow clamp on saw mounting brackets
Answer:	It appears that if you buy the stanIt appears that if you buy the "stand" for 174.99, that's all you get...no brackets to hold the saw. Have to pay additional $28.00 to get brackets. Now, to me, that doesn't make sense. Why wouldn't the stand come with brackets to hold the saw? It would be like buying a kitchen blender "stand", and then having to buy the glass blender container. Weird.

Product features

DEWALT DWX724 Compact Miter Saw Stand

The DWX724 Compact Miter Saw Stand is designed to work with all brands of miter saws. Compact design and lightweight aluminum construction (29.8 lbs.) allows for easy transport and leg lock levers allow quick set up. 40" beam extends to support up to 10 ft. of material and up to 500 lbs.

Features & Specifications

-Universal design works with all brands of miter saws.

-Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite.

-Legs provide superior support and fold for easy storage.

-Extension Lock Levers allow for fast and secure locking of extensions.

-Work stops/supports can be re-positioned quickly anywhere along the rail.

-Compact design allows easy transport and storage.

-40" beam extends to support up to 10 ft. of material and up to 500 lbs.

-Leg Lock Levers allow for fast and easy set up.

-Tool mounting brackets allow easy and secure mounting of miter saw to stand.

-Non-marring feet on tool mount will not scratch material.

-Miter saw not included.

• THE COMPACT DESIGN➤ The folded size is 35.8" x 9.8" x 5.9", weighs only 21.6 lbs. Both opening and folding can be completed in a short time. The compact miter saw stand is also easy to store
• UNIVERSAL SAW STAND➤ The MST01A miter saw stand compatible with most brands of miter saws. Durable iron skeleton frame with anti-rust coating can withstand a maximum of 330 pounds
• SCALABLE SIZE ➤ A dual sliding rail that extends up to 76-4/5 inches can support as long as 10 feet material. And can be fixed at any position to suit the length of the cut material
• ROLLER & END STOPS➤ The rollers at both ends of the stand can reduce the friction when sliding the cutting material, and the End stops can help you fix the cut material
• NON-SLIPPING FEET➤ The rubber enhanced feet prevent slipping when working. It features a heavy-duty boxed tube steel frame which guarantees strength, stability as well as the peace of mind knowing it will stand the test of time

User questions & answers

Question:	where is it made
Answer:	Not sure but it's a great stand for the money.i use mine all the time .easy to set up and great for on the go.
Question:	What is the real weight of this stand
Answer:	only 21.6 lbs, it can be carried around the jobsite effortlessly.
Question:	Will this fit 10 in kobalt saw
Answer:	I believe it will. It fits my Ryobi 10 inch very well.
Question:	Will this work for a Roy I 12 inch sliding compound miter saw
Answer:	Yes it will! The part is Universal and should fit a 12 inch compound saw.

Product features

What’s in the box

- 1 x REYLEO MST01A miter saw stand

- 4 x Adjustment knob

- 2 x Work Support

- 2 x Saw Mounting Bracket

- 4 x Mounting screws

Product description

Makita’s 10” Compound Miter Saw (model LS1040) combines power, performance, and ease of use for most common miter cuts including a range of applications including woodworking, cabinetry, deck building, framing, and more. 15 AMP Motor for Improved Performance The LS1040 has a dynamically balanced 15 AMP direct drive motor with 4,600 RPM for improved performance. The direct drive motor with soft start delivers smoother start-ups and constant power, with no belts to slip or replace. Precise Miter and Bevel Cuts The LS1040 has a dual post compound pivot arm, with bevel cuts up to 45° to the left. Miter adjustments range from 0°-45° (left) and 0°-52° (right), with 9 positive miter stops at 15°, 22.5°, 30°, and 45° (left or right), and 0° (90° cuts). The precision-machined aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface, and a compact size (weighs only 27.3 lbs.) for easy portability. Best in Class for a Range of Applications The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, general contractors seeking a best-in-class 10” compound miter saw for the jobsite or the benchtop.

Makita's LS1040 10-Inch Compund Miter Saw combines power, performance, and ease of use for common miter cuts, including a range of applications in woodworking, cabinetry, deck building, framing, and more.

View larger

LS1040 Features PERFORMANCE - Powerful 15 amp direct-drive motor and 4,600 rpm for improved performance CAPACITY - Miter cuts 0° - 45° left and 0° - 52° right; 9 positive stops for common miter cuts ACCURACY - Dual post compound pivot arm, bevel cuts up to 45° to the left PORTABILITY - Weighs only 27.3 pounds INCLUDES - C.T. blade, vertical vise, wrench, triangular ruler, and dust bag

Tool Specifications Blade Diameter 10" Arbor 5/8" Max. Cutting Capacity (Bevel/Miter) 90°/90° 2-3/4" x 5-1/8" Max. Cutting Capacity 45°/45° 1-3/8" x 3-5/8" No Load Speed 4,600 rpm AMPS (120V) 15 Dimensions (L x W x H) 20-7/8" x 18-3/4" x 21" Net Weight 27.3 lbs.

15 AMP Motor for Improved Performance

The LS1040 has a dynamically balanced 15 amp direct-drive motor with 4,600 rpm for improved performance and is engineered to never slip or bog down like belt-drive units. The electronic speed control maintains constant speed under load, and the soft-start technology is engineered for smooth start-ups.

Precise Miter and Bevel Cuts

The LS1040 has a dual post compound pivot arm with bevel cuts up to 45 degrees to the left. Miter adjustments range from 0 to 45 degrees left and 0 to 52 degrees right, with 9 positive miter stops at 15, 22.5, 30, and 45 degrees (left or right), and 0 degree (90-degree cuts). The engineered aluminum base ensures accurate cuts. Ease-of-use and comfort features include a fluorescent light that works independently of the blade rotation to clearly illuminate the work surface and a compact size (weighs only 27.3 pounds) for easy portability.

Best in Class for a Range of Applications

The LS1040 is engineered for a broad range of trades, including finish carpenters, professional woodworkers, case and base installers, cabinet installers, decking and flooring applications, siding installers, and general contractors seeking a superior 10-inch compound miter saw for the jobsite or the benchtop. The LS1040 is just another example of Makita's commitment to innovative technology and best-in-class engineering.

About Makita Saws

Cut after cut, Makita saws deliver power, performance, and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal, and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.

About Makita

Makita is a worldwide manufacturer of industrial-quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are compact and energy efficient, yet deliver industrial-strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best-in-Class Engineering.

Warranty

Every Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.

What's in the Box

Makita LS1040 10-Inch Compound Miter Saw, 10-inch C.T. blade, vertical vise, wrench, triangular ruler, and dust bag.

• Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM
• Dual post compound pivoting arm
• Miter cuts 0-45 left and 0-52 right
• Positive miter stops at 9 settings: 15, 22.5, 30, 45, right or left and 0 (90 cuts)
• Bevel cuts up to 45° to the left
• Weighs only 27.3 lbs. for easy portability
• Precision machined aluminum base ensures accurate cuts

User questions & answers

Question:	in my country, we use 220v, can I plug this item to my current circuit
Answer:	No. 120 volts AC single phase
Question:	As of Mar 2018, Does it still cut an arc when sliding, as opposed to a straight line
Answer:	Mine does not. Be careful with damaged packaging and saw impact
Question:	Does the laser show both sides of the blade, that is is it a dual laser? Also does the laser have a separate switch or is it centrifical
Answer:	The laser is on one line only and it can be switched left or right of the blade. There is a separate ON/OFF switch for the laser
Question:	will it cut 4in x 4 in timber
Answer:	Yes, if you make 2 cuts. The only saw I know of that will do it in 1 cut is a Chop saw with a 12" blade. Or a Radial arm saw. But it needs a 12' blade too.

• 🔥2021 New Release Promotion🔥 🎁❤️Ideal Gift for Your Family & Professional Work.In US, Usually Ships within 5 Days.❤️🎁
• TACKLIFE MULTI-FUNCTION SAW STAND
• 【ROBUST CONSTRUCTION & COMPATIBILITY】➤Sturdy iron frame and multi-function work table with anti-rust coating, which can withstand bumps and harsh outdoor working conditions during transportation. The double slide rails extend up to 67-4/5 inches. The universal design is suitable for almost all saws on the market, including table saws, band saws, scroll saws, miter saws, and even cutting machines.
• 【QUICK INSTALL & Easy Fold】➤➤Multi-functional saw frame can be quickly assembled and folded without any tools. With the aid of two quick-release mounting brackets, the machine can be easily installed and removed from the saw frame. The folded size is 30.31 inches x 21.26 inches x 6.69 inches and can be stored in the rear of the car or in the cabinet.
• 【6-LEVEL HEIGHT ADJUSTMENT & SUPPORT 500LB】➤The SS01 saw stand is specially designed to provide ideal ergonomic working height. The height adjustment range is about 23-1/5"-32-2/5", 6-level height selection, no tools are required Fast switching, so professional contractors and daily craftsmen can work safely and comfortably while cutting with absolute precision and safe stability.
• 【ROLLER & END STOPS】➤➤The rollers at both ends of the bracket can reduce the friction when sliding the cutting material, and the end stop can help you fix the cutting material, and can fix the material at any position suitable for the cutting length.Tacklife power tool stand can withstand up to 500 pounds.
• 【NON-SLIPPING FEET & PORTABLE HANDLE】➤➤TACKLIFE multi-function work table has an upgraded version of rubber-reinforced feet to prevent slipping during work. The portable handle is convenient for hand-held transfer to any position. The power tool stand weighs only 36.6 pounds and can be easily carried in the workplace.

User questions & answers

Question:	Can this saw stand be walked in one hand
Answer:	"Dear customer, The Power Tools Stand is only 36.6lbs，you can walk it in one hand. TACKLIFE provides a 【24-month warranty】 for all products, by visiting 【[email protected]】for free extended warranty. If you have any concerns/questions just feel free to email to [email protected], or Facebook: www.facebook.com/Tacklife.US,at working time, we will always be there for you."
Question:	How much weight can this saw stand bear
Answer:	"Dear customer, The Power Tools Stand is only 36.6lbs，you can walk it in one hand. TACKLIFE provides a 【24-month warranty】 for all products, by visiting 【[email protected]】for free extended warranty. If you have any concerns/questions just feel free to email to [email protected], or Facebook: www.facebook.com/Tacklife.US,at working time, we will always be there for you."
Question:	Do rollers extend for more support
Answer:	Yes... about 5 to 10".It can basically meet all our needs.
Question:	Is there a video of installing the saw? How to fix my saw on the table
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes, this is the video of us installing the scroll saw. Just tighten the screws we are equipped with. I hope it can help you.

Product features

MULTI-FUNCTION SAW STAND SUPPORTS UP TO 500 lbs

• TACKLIFE Power Tools Stand weighs only 36.6 pounds and can be easily carried in the workplace.
• Multi-function work table is suitable for almost all saws on the market, including table saws, band saws, scroll saws, miter saws, cutting machines and even barbecue grills.
• TACKLIFE power tool stand can withstand up to 500 pounds with the anti-rust coating & durable iron skeleton frame.
• Miter saw stand can withstand 12-inch miter saw, which is very stable and reduces vibration.
• Multi-functional saw frame can be quickly assembled and folded without any tools.
• The SS01 saw stand can be stored in the rear of the car or in the cabinet.

Six Steps for Quick Installation and Adjustment:

Power Tools Stand for Miter Saw

Power Tools Stand for Band Saw

Power Tools Stand for Table Saw

Easy to Carry

Ergonomic Design

Flexible & Adjustable

Product description

If you have a miter saw, then the PM-4000 folding miter saw stand is exactly what you need. Designed to work with nearly every make and model miter saw or chop saw, this strong, stable stand will allow you to setup wherever you wish – quickly, easily, and safely. Whether it’s a jobsite or your driveway, you’ll appreciate being able to work exactly where you need to. This is a contractor grade miter saw stand, but priced for the homeowner. But don’t let the low cost fool you – this is a high quality piece of equipment, with tubular steel construction, and a whopping 500lb capacity, so you can handle the big jobs with ease. The quick attach mounts make attaching and detaching the saw simple, and the adjustable 13” tall material supports can be in or out to support material ten feet long. But here’s the kicker – it’s not only lightweight, but it folds up for easy transport and storage, making this one of the most versatile miter saw stands on the market. An optional Wheel Kit is available (PM-7004) for added mobility, and extra tool mounts (PM-7002 – 20-in long and can be adjusted along the width to fit most saws) are also available allowing you to expand the use of your stand to other tools in your shop.

From the Manufacturer

If you have any questions about our product, please contact us by emailing [email protected] or calling 1-866-588-0395.

• A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand you’ll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
• Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
• Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly – hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
• Makes the cut – our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.
• Any way you cut it – Buy with confidence knowing that you are backed by our 1-year . If for any reason, you're not 100% satisfied with your purchase, let US know, and we'll make it right.

User questions & answers

Question:	Anyone have a slick way to set up a stop block on this for repetitive cuts of the same length
Answer:	One way to do this is to create a sub-fence that attaches to the fence of your miter saw. The sub-fence needs to be long enough to rest on the outrigger arms and accommodate your cut length. Once you have that in place you can clamp a block or other type of stop to the false fence. Position the stop where you need along the sub-fence and then you can do repetitive cuts. If you have any more questions regarding this product, please call the manufacturer at 248-588-0395 or send us an email at [email protected]. Thank you
Question:	can we use it with the Hitachi 10" miter saw with laser
Answer:	I have a hitachi C10FCH2 10" with laser. I needed to use the offset mounting brackets that came with the stand.Worked great
Question:	How can you order replacement bolts to lock down the saw
Answer:	The carriage bolts are 8MM, but 5/16" will work fine as long as you get new nuts as well. Like it was said, you can get those at any hardware store for less than $2. I had to replace mine, since the supplied bolts were a little too long for my old saw's base.
Question:	What is the assembled dimensions of the stand w/o the arms extended? I am looking for the dimensions between the feet when open. Thanks
Answer:	The top frame of the stand is 8-3/4" deep and 44 "wide. At the floor the outside dimensions are 54-3/8" wide by 24-3/4 deep. Since the legs slope outward and are about 1-1/4" square you could get the inside dimension by subtracting 2-1/2". If you need to put something under the stand you must allow for the slope of the legs. The arms extend about 36" each side. The two support beams for the saw or other tool are 20" long and extend about 4'' over the front top 44" beam and 7" behind the rear top beam. I use a DeWalt 12 miter saw on mine and have found the stand to be strong and stable.

Product features

BORA Portamate PM-4000 Folding Miter Saw Stand

Designed for the contractor and DIYer alike, the PM-4000 Portable Folding Miter Saw Stand makes it easy to work where the job is—from the commercial construction site to the driveway or garage.

Quick Setup & Takedown

Folds up for easy transport, storage and carrying from your truck or van to the work site. Folded size is 43-1/2in (W) x 20in (D) x 6-1/2in (H) and weighs only 30 lbs - without saw.

Extra Tool Mounts make Easy Tool Switches

Change your tools easily with quick attach mounts. Additional mounts (sold separately) allow you to have a wide variety of tools that can mount quickly and easily to your PM-4000 stand.

Comfortable Work Height

Stands at an ideal working height of 35 inches to make your work safe and efficient. This design increases stability and accuracy.

Upgrade as Needed

You can easily add more maneuverability to your Bora Portamate PM-4000 Miter Saw Stand with our PM-4004 dual wheel upgrade kit, which is sold separately. The dual 6-inch diameter wheels make navigating through the jobsite a smooth ride, rather than an added project. This optional add-on kit includes two 6-inch wheels, hardware and installs. No drilling needed - just snap, and secure wheels to the PM-4000 miter saw stand, and it's ready to roll!

Universal Tool Mounts (included)

• Minimum distance between bolt centers: 6-1/2 in. (16.5 cm)
• Maximum distance between bolt centers: 18 in. (45 cm)
• Fits any width between saw mounting holes as tool mounts are not connected
• Offset wings accommodate saws where front/back mounting holes are not in-line to each other

PM-4000 Specs

• Extending arms adjust from 45 in. (114 cm) to 114 in. (290 cm)
• Height from top to bottom: 35 in. (89 cm)
• Width from front leg to back leg: 53-3/4 in. (136.5 cm)
• Max capacity: 500 lbs.

Product description

Introducing the Deluxe Portable Miter Saw Stand by POWERTEC. This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast. Heavy Duty Construction – Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools. Built-In 110V Power Outlet – Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply. Spring-Loaded Locking Legs – Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions. Rolling Mobility – Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil. Compact Portability – Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road. Universal Compatibility – Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands. Additional Product Specs• Height: 31-7/8"• Width (extended): 79-1/4"• Outlet Input Voltage: 125V AC• Input Ampere: 15 Amps• Net Weight: 40 lbs. (18 kg) POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

• INCLUDES: Portable Miter Saw/ Planer Table
• FUNCTION: A hassle-free and practical workstation stand for miter saws, planers, chop saws and other bench top-tools
• FEATURES: Portable design with super-grip 8-inch rubber wheels, spring-loaded locking legs for easy set-up and break down, universal quick-release mounting brackets that work with most miter saw
• SELF POWER SUPPLY: Flaunts a convenient 110V 3-3 prong power strip along the lower base to eliminate the need of a nearby outlet for your power tools
• PREMIUM BUILD: Miter saw work station is made with high quality round steel tubing for superior industrial strength that supports a 330 lbs maximum weight capacity

User questions & answers

Question:	My miter saws leg bolts are 14.5 inches apart. Anyone know if my saw will work
Answer:	David L. Miller answered correctly. The slots on the arm accepts a 15 inch span. So measure the distance between the bolt holes from front to back on your saw and make sure they are 15" or smaller and you're good. I have used this stand extensively this year. Its well worth the money. Very sturdy.
Question:	I have a Makita 12 inch slide. Will this stand fit my saw
Answer:	It should there is a lot of adjustment on the clamp bars that bolt to the saw.
Question:	Will my Dewalt 10" and 12" miter saws work with the supplied adapters
Answer:	Yes it seems to fit just fine with my 10" Dewalt Miter that I have. I would guess the 12" would be fine as well.
Question:	What is the approximate width inside curve to inside curve of the clamping area? Ie. what width of stand will these clamps work on
Answer:	12" with adjustable clamp to 1". I use 3 different portahorse stands Black and Decker is a great stand for these clamps also Home Depot brand fold and travel, Menards also sells their own brand also I made my own stand for my work station. These clamps are great the handles on the sides make portability a major plus, they are a great value. I had purchased 4 sets to fit on my equipment.

Product features

The Deluxe Portable Miter Saw Stand by POWERTEC

This heavy duty workstation was designed to provide you with seamless and mobile integration with your miter saws and bench-top tools. From the compact size, to the high quality construction, and onto any of the many unique features this miter saw stand was made for optimal convenience for every professional contractor or DIY enthusiast.

Heavy Duty Construction

Made with industrial strength round steel tubing for durability, and flaunts a 330 lbs maximum weight capacity to support your benchtop power-tools.

Utilizing quick release adjustable mounting brackets, our miter saw stand accepts most 10” and 12” miter saws from all of the major brands.

Universal Compatibility

Possesses a manageable 40lb weight and foldable design that allows you to efficiently store this cost effective unit at home or take it with you on the road.

POWERTEC MT4000 can safely be stored, with or without a saw attached, in the horizontal position. A foot or bracket is not provided that would allow for vertical storage. However, with the saw removed, the stand can be stored vertically if supported or lashed.

Built-In 110V Power Outlet

Eliminates the inconvenience of having to place your bench top power tools in a location near a power supply.

Input Voltage: 125V AC

Input Ampere: 15 Amps

Spring-Loaded Locking Legs

Allows you to quickly set up or collapse the foldable miter saw stand, without complicated or lengthy instructions.

Rolling Mobility

Equipped with eight-inch super grip rubber wheels that deliver optimal traction that won’t bog down into the soil.

• 🔥Ideal gift for your family & professional work.Usually ships within 5 days.
• ➤QUICK INSTALLATION & EASY TO CARRY: The miter saw stand can be quickly assembled and folded without the need for any tools. Weighing just 21.6 pounds, it can be carried around the workplace effortlessly. The folding size is 35.8 inches x 9.8 inches x 5.9 inches, which can be stored in the back of the car or the cabinet.
• ➤ROBUST CONSTRUCTION & COMPATIBILITY: Rugged iron frame with rust-resistant coating to withstand bumps and harsh outdoor working conditions during transportation. The miter saw stand can support up to 330 pounds at a time and are compatible with most brands of miter saws and chop saws.
• ➤EASY TO MOUNT: With two quick-release mounting brackets, it is easy to install and remove your miter saw from the saw stand. The double slide rail extends 76-4/5 inches and can support up to 10 feet of material.
• ➤ROLLER & END STOPS: The rollers at both ends of the stand can reduce the friction when sliding the cutting material, and the End stops can help you fix the cut material.And can be fixed at any position to suit the length of the cut material.
• ➤NON-SLIPPING FEET & WARM PROMPT: Rubber reinforced feet prevent slipping while working. This miter saw stand emphases lightweight and portable, the maximum load-bearing is 330lbs, please consider carefully when you choose this miter saw stand for ultra-large, heavy-duty 12-inch miter saw.

User questions & answers

Question:	Will a Rigid 12” sliding miter saw work on this stand
Answer:	I wouldn't put mine on it. I put Bosch 8 1/2" cordless and it's great
Question:	Does this item fit my miter saw? It is a Dewalt 12 inch compound sliding saw
Answer:	I mounted my Dewalt 12 inch compound miter saw (DWS 715) on it. Mine is not a sliding version however. It worked well.
Question:	Can a kobalt miter saw 12 inch fit on it
Answer:	Yes. Our Ryobi 12 inch fits perfect.
Question:	Will it fit a Craftsman 10” mitre saw
Answer:	not sure if the holes don't line up they should be easy to drill

Product features

Four Steps for Quick Installation and Adjustment:

About TACKLIFE:

At TACKLIFE, we contribute to providing our customers with the best products as to they can live a more convenient and intelligent life.

At TACKLIFE, the professional product team focuses on every detail of the product and aims to provide well-made and multi-functional products.

TACKLIFE MSS01A Portable Miter Saw Stand

TACKLIFE MITER SAW STAND

- Item Weight: 21.6 lbs

- Open Dimension: 76.8 x 36.2 x 20.9 inches

- Folding Dimension: 35.8 x 9.8 x 5.9 inches

- Maximum Support Capacity: 330 lbs

- Maximum longitudinal distance between the mounting holes: 14-3/4 inches(375mm)

Product description

Miter Saw Stand, Length 51 In., Width 27-3/4 In., Height 33-1/2 In., For Use With Mfr. No. 5312, 4212, 4410, 5412, 4410L, 5412L, and 4212L, Features Supports up to 18 ft. of Material, Adjustable Telescoping Leveling Legs, Adjustable Height, Universal Mounting System, and Rubber Wheels, Includes Universal Rapid Release Tool Mounts

The Bosch TB4 gravity-rise miter saw stand features the patented gravity rise system, and rapid set up and breakdown. It has an 18-inch material capacity which is the highest capacity among fully portable units. It has 8-inch pneumatic wheels which facilitate ease of transport over jobsite terrain. It also features rapid release tool mounts, adjustable leveling feet for stability on uneven surfaces and it also fits most competitors' miter saws.

From the Manufacturer

Bosch expanded its patented and award-winning technology to develop and introduce the new Gravity-Rise T4B Portable Miter Saw Stand. Smart, durable and simple to use, professionals never need to worry about how to setup or carry their miter saw ever again. The T4B features the same Bosch-patented Gravity-Rise system as the industry's award winning TS2000 Gravity-Rise Table Saw Stand. Unlike other miter saw stands, the Bosch Gravity-Rise system is practically effortless and allows for rapid set-up and breakdown in seconds. With a simple turn of the release lever and the user's guidance, the weight and balance smoothly raises the heavy-gauge steel and aluminum constructed stand and saw into working position. Set the leveling-Feet for uneven terrain and professionals are ready to get to work. Turn the same release lever again and the entire stand folds into a push cart design, complete with 8-Inch pneumatic wheels, perfect for transporting the saw over rough terrain from one location to the next. The T4B utilizes an aluminum support rail and special Universal Rapid-Release Tool Mounts designed to attach to the base of all Bosch and most competitors' miter saws. These mounts allow any user to quickly attach or detach the saw to the stand. And rubber-Feet prevent scratches when placing the tool on a cabinet top or bench. The same support rails expand for 18-Feet total material support, the highest among fully portable units. For users cutting long pieces of molding or flooring, this kind of support is priceless. Adjustable repetitive stops and table supports also allow the stand to adapt to varying applications and saws.

• ADJUSTABLE: Featuring a Bosch-exclusive, patented Gravity Rise System designed for rapid set up and easy breakdown, taking the toughest jobs to the next level
• CAPACITY: The Bosch T4B Gravity-Rise Miter saw stand has up to 18 feet of material capacity, the highest capacity among fully portable units
• PORTABLE: Built with 8-Inch pneumatic wheels for ease of transport over jobsite terrain with even the heaviest miter saws attached
• UNIVERSAL: Featuring Rapid Release tool mounts - for use with most major competitors miter saws. Adjustable out feed -up to 12 inch in height
• DURABLE: Equipped with adjustable leveling feet for stability and durability on uneven surfaces. Material - Steel

User questions & answers

Question:	can it be wheeled though a standard size door with saw on
Answer:	Thank you for your question. The T4B will fit through a standard size door. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Are extra mounting brackets available? If so, where? I would like to use this stand with multiple saws
Answer:	1609B02007 is the bosch part number for the brackets. Amazon has them if you search the number, however as of this posting they are on the order of $10 cheaper direct from bosch. Can't say how shipping/handling/tax compares.
Question:	Do the ends of the support arms flip up to act as a stop when I want to cut several pieces the same length
Answer:	The end pieces move up and they can be used as stops, but I find they are a bit "wiggly" and seem cheaply constructed. I do not rely totally on them for stops; I clamp a piece of wood to the arm and make it as firm as possible. Maybe the one I got is not as well built as the ones used by the authors of the other two answers.
Question:	Would the Hitachi C12RSH 15 Amp 12-Inch Sliding Compound Miter Saw with Laser fit this stand
Answer:	Trini, I would believe John Cottingham's review, since he has one. The mounting system is very accomodating. The saw only needs four bolt holes in its base. The mounting bars on the stand can be placed anywhere along the center rail to accomodate the width of the saw base and the length of the bars can handle most depths of the saw since the attachments are in slotted holes. The rear mounting holes also have some play sideways so the rails can handle a saw that has different spacings of the rear and front bolt holes. I have a 12" DeWalt saw and this stand makes hauling it around real sweet. Also, setup for operation is really quick. The laser guide should not be an issue.

Product features

Added Precision and Peformance for your Benchtop Tools

Bosch benchtop tools provide the precision and performance your projects require. Durable quality is not only in every tool, but the trust you have in Bosch benchtop tools. The integrated out feed and supports holds up to 18 ft of material. The universal mounting system allows for use with all major competitors' saws. Equipped with an adjustable telescoping levelling leg to provide stability on uneven surfaces.

Features

• Integrated out feed and supports — up to 18 Ft. of material support capacity
• Adjustable telescoping levelling leg — provides stability on uneven surfaces
• Adjustable height out feed
• Universal mounting system — for use with all major competitors' saws
• Integrated rubber wheels — easily move stand with saw attached from jobsite to jobsite
• Adjustable height out feed

Product description

Whether you're a contractor or a DIY enthusiast, the Folding Work Table by Keter provides a sturdy yet portable work space for a wide variety of projects. From home improvement projects to commercial construction work, this folding workbench helps you get the job done in any type of setting. Whether you need a sawhorse for cutting jobs or a place to rest boards for painting, a pair of one-handed clamps holds your project materials securely in place. Count on this folding work table to provide dependable work support for everything from sanding two-by-fours to staining table legs. Durable steel legs provide the support you need to feel confident while performing any task. Try it for one project and the bench will become your go-to source for reliable work support.

Thoughtful engineering, quality construction and weather-resistant materials allow the table to adapt well to any work environment. Made from rugged polypropylene resin, the work table is built to stand the test of time. Its plastic base offers the following benefits:

• Won't peel
• Resists cracking
• Never rusts
• Resistant to dents
• Won't fade in the sun
• Folded dimensions: 33.46” W x 21.65” D x 4.4” H
• Assembled dimensions: 33.46” W x 21.65” D x 29.75” H

From the Manufacturer

Keter 17182239 Folding Work Table pops up to allow for a work surface then neatly folds away when you're done. Won't take up much room when not in use. Two clamps are included to hold down whatever you're working on. The quick opening device makes assembly a snap.

• DIMENSIONS: Standing: 33.46 in. L x 21.65 in. W x 29.75 in. H / Folded: 33.46 in. L x 21.65 in. W x 4.4 in. H
• RESIN CONSTRUCTION: Made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs.
• DURABLE AND STRONG: Weather-resistant polypropylene construction prevents rusting, peeling, and denting
• LESS THAN 30 SECOND SETUP: Unique quick opening and folding system for easy storage and portability
• LESS THAN 30 LBS: With its lightweight design and sturdy carrying handle, take your workbench just about anywhere
• EASY STORAGE: Folds down to 4.4 inches thick for easy storage in a pinch
• ACCESSORIES INCLUDED: Includes two 12 inch clamps to secure a variety of working materials
• VERSATILE USE: Perfect for any kind of project – DIY projects, home improvement, commercial construction work, painting, table saw use, and more

User questions & answers

Question:	Image shows a large saw being used on the work bench. Can saws be attached to the work bench
Answer:	The top of the bench is about 3" thick, honeycomb thermoplastic, with a variety of clamping points. I usually clamp wood to the surface, and use my power tools in my hands. But the bench will hold hundreds of pounds and is very stable (I have stood on it - 220 lbs). This workbench is considered a mobile workbench, and is no match for a heavy metal tool stand. And how do you define a large saw, 12" comercial table saw, or power miter saw? Say the saw weighs 50 pounds. If you can clamp or bolt the your saw to the top, in my opinon it will hold the weight and stress of cutting standard wood pieces. If you are trying to cut railroad ties, it is probably not the right bench.
Question:	Did anyone consider the Worx Pegasus table? Why did you choose this one
Answer:	The biggest reason for me was this Keter has hole sections so you can the clamps vertically as well as horizontally. I didn't have much use for the saw horse components of the Worx Pegasus. I actually bought the adjustable leg keter that is now available since I am over 6' and no other folding table seems to get as high (34" to top of surface)
Question:	what is the size of the top work surface
Answer:	the size is 33 1/4 " x 21 1/2 ". good work table. if anything happened to mine i would have to have another.
Question:	How much does it weigh
Answer:	It says 30 pounds and that's about right. Packed up, it feels like a heavy suitcase. To open it, the handles are at each end, about 36" span, but it's still liftable. My worry was being able to lift it well enough to control the legs while closing it up, as they have to fold correctly. Though I'm 60, I've found it's very manageable. I use it indoors. It's portable to outdoors but on a level surface, the legs don't adjust. I love this table. I can't imagine working without it.

Product features

The Keter Folding Work Table

The Keter Folding Work Table provides a sturdy portable work space for a wide variety of projects. Count on this folding work table to provide dependable work support for everything from sanding two-by-fours to staining table legs. Durable steel legs provide the support you need to feel confident while performing any task while a pair of one-handed clamps holds your project materials securely in place. Try it for one project and the bench will become your go-to source for reliable work support.

Step 1

Fold the center support section down and push in on the side supports to unlock them.

Step 2

Reach through the openings in the table top and grasp the lower section of the bench. Pull up on the lower section to begin collapsing the legs, lowering the unit to the ground.

Step 3

Once the unit is flat on the ground, press down on the table top to place the unit into its fully closed position.

Step 4

Carry the unit by the convenient carrying handle.

Product description

RYOBI introduces the Universal Miter Saw QUICKSTAND. This stand features a durable steel construction and can accommodate all RYOBI miter saws, as well as most other brands. The quick release mounting brackets help you easily mount and remove your miter saw from the stand. It folds up quickly and easily for added convenience. The Universal Miter Saw QUICKSTAND includes mounting hardware, saw brackets, material supports, material stops, and an operator's manual. Product Depth (in.) 54.76 Product Height (in.) 9.11 Product Width (in.) 10.8

• Holds up to 400 lbs.
• Includes: Miter Stand with quick release mounting brackets
• Works with all RYOBI Miter Saws and is compatible with most other brands

User questions & answers

Question:	will this work with a Ryobi 10" sliding compound miter saw
Answer:	I think it will work with any standard chop or compound miter saw
Question:	Does it come with mounting brackets and will it support a 12 in dewalt slide saw
Answer:	Yes it has mounts and I have a 12 inch on mine. Everything a stand should be
Question:	i have a hitachi miter saw so this one its goin work for me thanks
Answer:	if it has mount holes on the saw all you need is the mounting brackets from ryobi.
Question:	How far out will it extend? 16 feet
Answer:	Yes, 16 feet. Perfect for my jobs is a great stand

Product description

The WST06 Compact Folding Miter Saw Stand is a versatile and portable solution for increased mobility. It has a compact and lightweight aluminum tubular design for less weight (only 33.7 lbs.), with transport wheels and side handle that allows the miter saw and stand to be transported around the job site. The WST06has material support extensions that extend up to 100-1/2” with a maximum supported weight of 500 lbs. The durable aluminum feed roller and adjustable material stop are engineered for increased speed on repetitive cuts. The folding legs allow for easy transport and compact storage (45-1/4” folded). The stand is the perfect companion to a Makita miter saw for a broad range of trades including finish carpenters, professional woodworkers, case and base installers, cabinet installers, cabinet manufacturers, closet installers, decking and flooring applications, siding installers, stair installers, and general contractors seeking a best-in-class job site miter saw stand. Folded Dimensions (LxWxH) : 50 inches x 10-3/4 inches x 9-3/4 inches

• Compact and lightweight aluminum tubular design for job site portability; weighs only 33.7 lbs
• Large solid rubber wheels and side handle allow the stand with miter saw attached to be easily transported around the job site (miter saw not included)
• Material support extensions extend to 100-1/2" and support up to 500 lbs. For increased cutting efficiency
• “Tool-less” adjustable miter saw bracket levers for easier installation/adjustment/removal of saw
• Durable aluminum feed roller and adjustable material stop are engineered for efficient repetitive cuts

User questions & answers

Question:	Metabo htp 10 sliding miter saw. has anyone got that saw on this stand
Answer:	I have a 10 inch sliding compound Makita on mine. I don't know that I'd go bigger or wider.
Question:	Would this work with a Dewalt 12" sliding compound miter saw
Answer:	I really can't see why it wouldn't, but I think there are better stands for the Dewalt 12 inch saw. Namely the Dewalt stand is better, stronger and just about the same price. If I had a 12 inch Dewalt compound saw, I would not be buying this stand. Do yourself a favor and read all the other remarks about issues with this stand including the one I gave an in depth solution to but should never have been an issue to start with. Good luck
Question:	What are the shipping dimensions
Answer:	46" x 11" x 10 1/2" Know it because I saved the box. It ships in the original Makita box only, no extra shipping box.
Question:	Can you buy replacement foot pads
Answer:	I checked all of my most reliable parts dealers and could not find one that sells any parts for this stand. However, what I would do is measure the diameter of the leg and see if I could buy rubber chair leg cushions at Home Depot. Buy 4 and I think you will be in good shape.

Product description

This miter saw stand is a fantastic addition to Evolution’s product range. Perfectly complementing Evolution’s miter saws, as well as most other brands of miter saw. Setup and take down of the miter stand is quick and easy. This miter saw stand is both lightweight and robust. The stand weighs just 34lb and can support long workpieces, up to 118in, in length and can support up to 330lb. It is equipped with quick release mounting brackets for fast saw removal and height adjustable arms, with rollers and end stops. The folding legs and support arms that slide into the stand, allow for simple storage and transportation. Fits all Evolution Power Tool's Miter Saws, as well as most other brands of miter saws.

• Quick & easy set up: the folding legs, quick release mounting brackets and support arms that slide into the stand, allow for simple set up, storage and transport
• Sturdy & Robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs
• Quick release brackets: quick release mounting brackets allow for fast miter saw removal
• Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts
• Fits all Evolution power tool's miter saws, as well as most other brands of miter saws
• NOTE: Excludes Skilsaw 12 In. Worm Drive Dual Bevel Sliding Miter Saw

User questions & answers

Question:	Can extra quick release mounting brackets be purchased for evolution power tools evoms1 compact folding miter saw stand
Answer:	Yes, it will cut 1/2" square hardwood easily and very accurately.
Question:	My Bosch seems to tip back slightly. Its 10" sliding mitre. Do i just tighten the clamping strength as far as possible
Answer:	excellent for cutting dollhouse trim
Question:	Will a 10” makita miter saw fit
Answer:	No, it's only for cutting small things like wooden dowels, lots use it to make 300 blackout from .223 cases.
Question:	Would a 10" Delta mitre saw fit on this? It's an old saw, about 17 years old
Answer:	You are talking about a rifle round? Yes it will cut that, but if the shell case is tapered you may need to jig it or support the case by some method to get an accurate cut.

Product features

Quick & Easy Set-Up

Simply pull out the folded legs, mount your saw and you are ready to cut

Telescopic Arms

The extendable arms can support a workpiece up to 9.84ft long

Height Adjustable Rollers

Safely & securely adapts to your workpiece for precise, accurate cutting

Mounting Brackets

For saw attachment & removal, simply lift up or pull down the quick-release locking handles

End-Stops

Setting a stopping point for your workpiece is simple. Perfect for quick, repeat cutting

Lightweight & Portable

Weighing only 34lbs, it is easy to transport around site. All whilst not taking up much space

• Saw stand can hold up to 330 lbs, ideal for most saws.
• Very stable and not easy to fall over. Anti-slip leg's pad makes extra stability and support to protect workers
• Lightweight, only 22lbs, Quick-Fold Design and for Easy Storage and Portability
• Quick Attach saw mounts allow you to easily mount your saw or other tools for fast setup and take down -- hardware is included
• 1-year warranty, 100% risk-free satisfaction guarantee

User questions & answers

Question:	Omax portable folding sawhorse heavy duty 275lb weight capacity each twin pack is this really a twin pack, some reviews suggest it is not
Answer:	Yes. I received two sawhorses.
Question:	I bought one of these, it says in the description that the legs are adjustable but mine is not
Answer:	The height is adjustable, but not the spread of the legs.
Question:	can you adjust height to 33" exactly
Answer:	Height can reach exactly 81 cm, nearly 33".
Question:	What is the width between the legs
Answer:	49" inside measurement x 19" inside measurement. Each leg is about an inch square so if you are needing tight measurements, to see if this is going to fit in a very precise spot, I would add another 3 inches to each of these numbers.

Product features

Folding Miter Saw Stand Heavy Duty

Folding Miter Saw Stand is a practical, hassle-free stand for contractor size saws. Constructed of tubular steel, the rugged yet lightweight saw stand can support up to 330 lbs.

No tools required

TOMAX metal saw stand need no tools. No hands needed, hold whatever you want, work anywhere you want. The Sawhorse is the ultimate job site workshop. Its versatility is unmatched-it can be used as a workbench, vice, miter stand, welding station or any other job site application. Its fold-down portability and its high stability let you take it and use it just about anywhere.

Set up is quick and simple--the folding legs swing under the center portion and are secured by pins that snap into position. You can easily set up and take down the portable miter saw stand. Folds up for easy transport, storage and carrying from your truck or van to the work site. With a maximum load capacity of 330lbs, the metal saw stand is a convenient, portable workstation that provides hands-free operation for holding, clamping, and supporting work materials.