10 best gator 14 diamond blades

Product description

Gator Wavy 7-Inch (7") X .095 X DM-5/8" Wet/Dry Diamond Blade for Concrete, Masonry, Hard Stone, Roof Tile and Similar Materials. Made with top-quality GE Superabrasive diamond, this blade is guaranteed to deliver a better combination of cutting speed and life with a lower cost per cut than any other blade on the market. Don't be misled by imitations. This diamond blade features a wavy, heat-treated steel core that increases airflow, reduces friction and is guaranteed to withstand the demands of dry cutting. Dimensions are 7" diameter X .095 thick with a Diamond Knockout arbor for Skil Saws. Included is a 7/8" arbor and a 5/8" bushing for adapting to other circular saws and grinders.

• Made with top-quality GE Superabrasive diamond, this blade is guaranteed to deliver a better combination of cutting speed and life with a lower cost per cut than any other blade on the market.
• Don't be misled by imitations. This diamond blade features a wavy, heat-treated steel core that increases airflow, reduces friction and is guaranteed to withstand the demands of dry cutting.
• Use dry or wet when you want for first-class cuts on cured concrete, brick, block, roofing tile, stone, pavers, slate, terrazzo and similar materials. The maximum safe operating speed is 8,730 RPM.
• Dimensions are 7" diameter X .095 thick with a Diamond Knockout arbor for Skil Saws. Included is a 7/8" arbor and a 5/8" bushing for adapting to other circular saws and grinders.
• Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!

User questions & answers

Question:	This works for porcelain and glass tiles
Answer:	I haven’t tried it on metal, it’s not advertised for metal. It cuts concrete like a hot knife through butter.
Question:	Will it cut asphalt
Answer:	Yes

Product description

Diamond masonry blade - high performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal. Thinner kerf to increase speed of cut while minimizing dust. Applications dry cutting Block, masonry Siding products and other masonry materials. Faster cut rate at a constant depth. Ideally used on thinner and softer masonry materials.

DeWalt's 4-1/2-Inch High Performance Masonry Diamond Blade provides long life and enhanced material removal. It has a thinner kerf to increase speed of cut while minimizing dust, and achieves 30 times longer life than bonded abrasives. This blade is best for cutting block, masonry siding products, and other masonry materials. It offers a faster cut rate at a constant depth, which is ideal for thinner and softer masonry materials.

From the Manufacturer

DeWalt DW4725 High Performance 4-1/2-Inch Dry Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor for Masonry

• The product is 4-1/2" HiPerf MAS Blade
• Easy to use
• The product is manufactured in China
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust
• High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal
• Thinner kerf to increase speed of cut while minimizing dust

User questions & answers

Question:	Will this fit the cordless dewalt 4 1/2 dcg412? thanks
Answer:	It will fit any 4 1/2". Cord or no cord is irrelevant.
Question:	Will this grid carbide bits
Answer:	This a Diamond Saw Blade, its used to cut tile, brick, concrete, Masonry type work. Not intended for cutting metal. I cut tile and concrete with mine.
Question:	Will this fit a DeWalt model D28402W
Answer:	Yes, you can use this with the DW402 but you need to get the DW4706 Backing Flange. Amazon sells it for $2.99 as an add-on item. You need this flange for any type 1 cutting wheel used on a type 72 grinder (cupped surface disks). BTW, the arbor is 7/8" for disks that don't screw on, and 5/8" threads for those that do screw on. Hence you need cutting disks, like this one, with a 7/8" arbor. This applies for all grinders, not just Dewalt.
Question:	Will this blade cut cast iron pipe
Answer:	it will cut steel but it will wear it out very fast . i am a mason and cut rebar with these blades all the time . not sure about cast iron but softer steel they will cut although they are not intended to be used for that

Product features

Diamond Saw Blade

High Performance diamond matrix provides longer life and enhanced material removal with a thinner kerf to increase speed of cut while minimizing dust. Used in applications such as cutting block, masonry siding products, and other masonry materials.

• High Performance diamond matrix provides more life of conventional abrasives and enhanced material removal.
• Thinner kerf to increase speed of cut while minimizing dust.

Product description

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

The DEWALT DW4701 is a great addition to your 4-to-4-1/2-inch grinders. With an advanced diamond matrix, this blade provides a longer life and improved grinder application. It’s designed for consistency, with a straight and dependable depth of cut and a greater life span by 100 times more than the industry standard. Use this blade on a variety of tough applications, including concrete, stone, granite, brick, and tile. It measures 4-1/2-inches in diameter with a 5/8-inch and 7/8-imch arbor. This grinder accessory must be used with the DW4705 4-inch or 4-1/2-inch guard with show and the DW4717 4-inch flange or DW4706 4-1/2-inch flange.

From the Manufacturer

DEWALT DW4701 Industrial 4-1/2-Inch Dry or Wet Cutting Continuous Rim Diamond Saw Blade with 7/8-Inch Arbor

• Extended performance diamond matrix provides 350 times the life of conventional abrasives
• Ideal addition to 4-to-4-1/2-inch grinders
• Continuous rim turbo design provides optimal use in brick, block, and tile
• Large diamond segments with cobalt ideal for use across various product applications
• Works with concrete, stone, granite, brick, and tile

User questions & answers

Question:	will it cut threw I beams
Answer:	No
Question:	Will this blade cut granite,corian,marble and ceramic tile
Answer:	For the blade to function properly no water is needed but should wear a good mask and safety goggles because substantial cement dust is generated.
Question:	Can this blade, eith a 7/8" arbor be used with the d28402 grinder which has a 5/8" arbor
Answer:	Yes
Question:	According to specs -Works with concrete, stone, granite, brick, and tile. Will this blade cut metal
Answer:	Yes, cuts most any type of stone countertops. Go slowly to avoid chipping the edge.

Product description

4" Porcelain saw Blade

Size:4inch

Arbor:22.23mm

Thickness:1.2mm

Segment Height:10mm

Blade Length:105mm

Application:Porcelain tile, Granite ,Marble,stone ,ceramic

• Universal for dry or wet cutting
• X teeth offer fast and smooth cutting
• High temperature extraction diamond blade has a long service life.
• Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine
• Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect

User questions & answers

Question:	What is the RPM for this blade
Answer:	Not sure
Question:	What is the return policy
Answer:	Looks simple
Question:	Hi i was trying to used this blade on my 7 inch chicago electric bridge tile saw the saw keeps cutting out once the blade ii on the saw (whats wrong
Answer:	1. Is the saw powerful enough to turn a blade that size when cutting? 2. If you have a hand held saw then you might be binding the blade 3. Is the blade on backwards....i e wrong rotation
Question:	What is the return policy
Answer:	I've never had to return a blade, so I don't know - but I imagine it's probably like other Amazon items - easy!

Product description

Piranha 7-inch (7") continuous rim wet/dry diamond blades are made with GE Superabrasive diamonds and are used for cutting a wide range of materials including ceramic tile, porcelain tile, stone or anything similar. Specs are 7" diameter X .060 thick with a diamond-7/8"-5/8" universal arbor for all tile saws, circular saws and hand-held grinders. The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! The diamond rim is also 10mm tall which maximizes cutting life and achieves a low cost per cut. Recommended operating speed is 5,100 RPM. Expected blade life is approximately 600 linear feet.

• This general purpose diamond blade is used for cutting a wide range of materials including ceramic tile, porcelain tile, granite, marble, slate, terrazzo or anything similar.
• Specs are 7" diameter X .060 thick with a diamond-7/8"-5/8" universal arbor for all tile saws, circular saws and hand-held grinders.
• The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting.
• The thin (.060) cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut! It is also 10mm tall which maximizes cutting life and offers a low cost per cut. Recommended operating speed is 5,100 RPM.
• This top-quality product is made in USA and backed with a 100% lifetime warranty plus free return shipping! If it ever breaks, warps, cracks or shows any indication of a material defect (being used for its intended use), or if the bond between the diamond rim and the steel core becomes separated at any time, it will be replaced free of charge!

User questions & answers

Question:	Can this blade be used to cut concrete
Answer:	I tried it dry just to try it, and I think, aside from the amazing amount of dust, it would over heat very quickly if you did anything other than the world's slowest movement. I would not use it dry. But wet, cuts glass smooth as silk and fairly quickly too.
Question:	Is this blade good for cutting quartz and other rocks
Answer:	i haven't done that but i can't see why not, just make sure you have the rotation correct.....
Question:	Can I use this on a 10” miter saw to cut a couple of marble chair rails
Answer:	Hi Our 6-70006GLQ is designed to be use with glass only and hasn't been tested for your application Thank you
Question:	What is the minimum rpm for this blade? we can not use slower than 3,600 rpm
Answer:	Good day, This blade will work on saws that fit the 5/8" arbor that the blade has. Thank you for choosing QEP. Customer Service

Product description

Quality industrial grade diamonds and easy-to-use color coding system. Applications include cutting in ceramic, slate. For use in tile saw.

• 5/8-Inch arbor
• Designed for clean cuts in most tile materials
• Tensioned steel core for stability
• Consistent diamond content and even distribution

User questions & answers

Question:	Has anyone used this blade to sharpen carbide tipped combination blades
Answer:	What do you mean by bond
Question:	can this blade cut metal
Answer:	It will work fine for cutting wine bottle and the like (thicker glass). If you feed into the blade slowly you will get a smooth chip free cut. The thinner the glass being cut, the more prone to chipping and cracking it will be.
Question:	can I use this to cut agates and other stones
Answer:	The blade does not impact the voltage. It is the arbor (the hole in the center) that matters.
Question:	How does this do with porcelain tile? I see that they mention "slate and ceramic on the blade itself. All of my work it with porcelain
Answer:	The label on the blade says it's good to 6000 RPM. But you wouldn't be able to read the label until you buy the blade and you wouldn't buy it until you knew what it's RPM limit is. Glad to help!

Product features

Bosch Diamond Blades

All Bosch diamond blades start with a formulation that emphasizes consistent diamond content and even distribution. A hardened and tensioned steel core provides rigidity and stability during cutting; and blades are designed to extend the life and enhance user comfort. Bosch engineers develop custom combinations of metals and industrial-grade diamonds to produce blades for specific concrete- and masonry-cutting applications.

Segmented Rim

For the fastest cuts in concrete, block, brick and stone.

Turbo Rim

For fast, smooth cuts in concrete, masonry and stone.

Continuous Rim

The cleanest cuts, best for tile and stone.

Go the Distance

Bosch diamond blades are designed for tough professional applications.

Superior Performance

Delivers clean, accurate cuts in a variety of different abrasive materials.

Tuckpointing

Standard and sandwich tuckpointing blades provide quick and consistent grout and mortar removal.

Concrete Surfacing

Segmented and turbo diamond cup wheels are optimized for material removal and fine finishing applications.

Product description

Specifications: Bi-Metal Blades for Sheet Metal, Re-bar, Pipes, Nail-embended wood, etc ; Fit on most of reciprocating saws . Thickness : 0.036" Wide: 3/4" Overall Length: 9in TPI: 18 Package Qty: 50pcs, come with plastic box.

• Lot of (50) Bi-Metal Reciprocating Saw Blades 9" x 18TPI

Product description

We has a very extensive standard selection of economically priced segmented blades for general contractor usage.

The Concrete Saw LSS series is designed to provide fast, smooth cutting in a variety of materials, including brick,block,paves,concrete and stone.



offers industrial diamond tools, power tools, and wide range of tools accessories.

wet dry polishing pads, diamond hand polishing pads, diamond hole saw core drill bits, cup wheels, diamond profile wheels, router bits, tuck point blades,

diamond saw blades etc are durable, aggressive and used in many natural stone fabrication shops, artificial stone manufacturing shops worldwide.



gives you the best shopping experience,Order Now Risk-Free!



THE SIZE AND USE OF DIAMOND SAW BLADES：

concrete saw diamond saw blades 14 blades concrete saw blade saw concrete saw 14 inch chop saw blade 14 diamond blade concrete

saw blades bricks for garden concrete diamond blade granite cutting tools granite saw rock saw for cutting rocks concrete block

concrete paver granite block long garden hose 200 feet stone cutter garden saw concrete cutter 18 x 18 concrete pavers concret real rock 14

• ❁Our concrete saw Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
• ❁Concrete saw blade Can be used wet or dry. For light or medium duty cutters.Thinner kerf to increase speed of cut while minimizing dust
• ❁Sintered diffusion bonded.High Performance diamond matrix provides 150x's the life of conventional abrasives and enhanced material removal
• Segment height 10mm. Arbor 1 inch -20mm . Size is 14"x.125"x.395"/10mm.
• ❁This diamond blade belongs to WHIRLWIND USA Diamond Segmented Lighting Series,Factory direct Sale & Fast shipment,Quality is guaranteed。

Product description

14", vh-5 Husqvarna segmented high speed diamond blade, 1" to 20mm arbor for cutting masonry, concrete, stone, tools hand held cut off saws, brick saws, Walk behind saws up to 20HP.

From the Manufacturer

Let the power of diamonds do the work for you with the Husqvarna VH5 high speed diamond blade. The VH5 is a general purpose blade for cutting cured concrete, and brick. This blade is made for dry or wet cutting, is diffusion bonded and is a quality grade level product.

• This are knife blade
• This are highly durable
• This is manufactured in China
• General purpose blade
• 14 inch blade diameter
• Drive pinhole center hole type
• 1 inch center hole diameter
• Diffusion bond assembly

User questions & answers

Question:	I have a Partner K950 circular saw..is this blade compatible to this
Answer:	Go and claim your refund....$12 is a bit overboard.
Question:	will this cut through the rebar in the slab
Answer:	Hi, u need to hold the bottom firmly and screw the top like ur opening a bottle.
Question:	This fit a k
Answer:	I use Nixoderm for various skin problems and it does work like a charm. However, I had a marvelous friend who was a Swedish Doctor & once when I seemed to be having fungal problems in the groin area he suggested that I wear Boxer shorts instead of Briefs, since fungus thrives in damp areas he explained. Can't recall if I did use Nixoderm with the change it's worth a try
Question:	Q materiales corta
Answer:	Don't use your fingers!!! Put it in the palm of your hand and then use your palms to twist it open :)

Product description

Product Description:

Available in 6''

Diameter: 150mm (6")

Segment Height: 8mm*2.2mm

Arbor:22.23mm

Application: Granite

• Dry and wet use, better performance with water
• Continuous rim makes cutting smoother.
• Turbo segment for dust removal and fast speed.
• With protective teeth, prevent undercutting.
• For angle grinder, circular saw, tuck pointer,etc.