14 best jet contractor table saws

Product description

The Powermatic 64B Table Saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops and extension plate for expanded workpiece support.



The Powermatic 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence® system is available in 30” or 50” rip cut capacity. Storage hooks on the stand keep your accessories within reach.

From the Manufacturer

The 64B table saw, with left tilt arbor, offers 1-3/4 horsepower in dual voltage to meet the demands of the professional contractor. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is included for non-through cuts. An arbor lock is accessed from above the table, eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension table. The exclusive Accu-Fence® system is available in 30? or 50? rip cut capacity. Storage hooks on the stand keep your accessories within reach.

• EXCLUSIVE ACCU-FENCE SYSTEM: Locks to rail without play for increased safety and precision.
• QUICK-RELEASE RIVING KNIFE: Maintains close blade proximity to reduce chance of kickback.
• CAST IRON TRUNNION: Ensures smooth blade positioning.
• MICRO-ADJUST MITER GAUGE: Offers wider crosscut support.
• BUILT-IN DUST PORT: Increases dust collection efficiency.

User questions & answers

Question:	Is the boxed saw unit in one piece? Can it be removed in pieces for transporting from the pallet to the basement
Answer:	It’s in a few pieces, but the only way you’d get it into a basement is if you have four huge men to lift it. Otherwise- no.
Question:	How many hp are available when plugged in 110v. can it work with 220v 2 phase? if so, how many hp is available this way
Answer:	The saw I have is the Powermatic PM 1000 Table Saw 1.75HP, 1 PH @ 115V. Apparently it can be be rewired for 230V, with a 7A draw. I don't know the resulting HP. Tried to look it up just now, but couldn't satisfy myself that I was getting the right answer due to unknown variables about the motor. I run mine at 115V.
Question:	Is it a left tilting blade
Answer:	yes, the top of the blade goes left
Question:	Can I plug this into any standard outlet
Answer:	Yes, you can plug it into any standard 120v outlet.

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick-release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	What size blade is used with this saw
Answer:	10"
Question:	Can you use thin kerf blades with this saw? What is the thickness of the riving knives
Answer:	Thin kerf blades can be used. The riving knife may need to be removed. The thickness of the riving knife is .125 inches.
Question:	does this saw come with a mobile base
Answer:	No. I bought that separately.
Question:	What are the dimensions at the bottom of the stand? I am trying to figure out if the non adjustable mobile base from my old saw will work
Answer:	The main table dimensions (L x W) are 20 x 27 in. You will have to estimate the bottom of the stand.

• MEASURE YOUR FACTORY INSERT AND COMPARE SIZE BEFORE YOU ORDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown.
• If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade.
• Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essentially enveloping the blade on all sides which doesn’t allow the wood to tear out since there is not gap between the blade and insert.
• Zero Clearance inserts can be used in conjunction with most any table saw blade including thin kerf, standard kerf and carbide tipped blades. You can also use zero clearance inserts with dado blade sets. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades.
• This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert features two Snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!

User questions & answers

Question:	Will this fit a Craftsman 103.2000, 9" table saw
Answer:	No it won’t
Question:	Will this fit a grizzly 1022Z table saw
Answer:	I purchased several for my G1022. I just had to slightly modify the fit with a hand file and sander.
Question:	Will this fit an older Rockwell/Delta model
Answer:	This is made to fit the Delta Uni-saw and Delta's contractor saws (New & Old) along with the other table saws listed in the description. I have a old Delta Uni-saw with a Ser.# that dates back to 1942 that I had refurbished I had no problem fitting it to my saw lots of adjustments UP and Down Side to Side to get a tight fit no major gaps it may not be an original part, but it very close. Hope that helps
Question:	will phenolic material hold up if edge is reduced to 1/8 inch thick? My older Delta tabel saw throat plate rests on a 1/8" lip
Answer:	I have the same 1/8th inch lip on my Delta 36-600 that would need the same solution. Does someone know what zero clearance blank I could use that will either fit the saw or allow for an edge rabbet transition around the perimeter?

Product features

Eliminate The Gap From Factory Inserts

Many of us who own table saws know all too well what happens when a small, thin piece of wood gets stuck or wedged between the blade and the opening on a factory supplied throat plate insert. The end result can be a visit to the hospital or even worse. Zero clearance inserts help minimize the chances of this happening by eliminating the gap that would normally surround your table saw blade. By doing this, the zero clearance won't allow for a small but dangerous piece of wood to get wedged in the factory plate and possibly kick-back at you.

High Quality Construction and Materials

This zero clearance insert is made from high quality phenolic material. We chose this material because of its superior rigidity, flatness, durability, low friction and its ability to last a very long time even after repeated daily use. Another reason we chose phenolic is that it can also be shaped to exacting specifications without breaking down like other materials used to make zero clearances can. This is one of the densest, longest lasting and durable zero clearances available today!

Sandable Tabs

Some table saw manufactures list there specs as a certain size. The actual tolerances however can be slightly different from what the manufacture states due to the manufacturing process from saw to saw. The snug fit tab on the side of this insert can be sanded down so that the zero clearance fits just right for your saw and creates the perfect fit! This allows for a custom fit with out having to sand down the entire edge.

Side Screw

We have also added a snug fit side adjustable screw. This screw is to be adjusted in or out to eliminate any side to side play in the insert.By adjusting the side screw you will ensure a tight fit so that the insert does not move creating a true custom fit to your saw. This is important so that the insert stay as close to the cutting edge of the saw eliminating any possible tear out especially when cutting plywood.

End Screw

Much like the snug fit side adjustable screw, the snug fit end screw is to be adjusted if you have any play in the insert from the front to the back. This adjustment will allow you to custom the insert to your saw for that perfect fit eliminating any sort of movement in the insert.Once all your adjustments are set the pre-drilled finger hole makes removing the insert quick and simple.

Measure Before You Order

• Length = 13-3/8”
• Width = 3-3/4”
• Thickness = 1/2”
• Laminated Phenolic
• Side Snug Fit Screw
• End Snug Fit Screw
• Sandable Snug Fit Tabs

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

Product description

At JET Tools, we see a future built on great brands, products, and people. In every facet of our business, we leverage the strengths of our global infrastructure to maximize the benefits of all three.

Offering a host of innovative design details, the Jet 708674PK XACTA SAW Deluxe 3 HP, 1 Ph includes an on-board fence and miter gauge storage for efficient, user-friendly performance. Ideal for home shop use, this powerful machine is designed for continual success and features both a quick-release riving knife and a push-button arbor lock to make operation safer and trouble-free.

Commercial XACTA Fence II for Accuracy, Performance, and Safety

One of the key features of the XACTA SAW Deluxe is its 30-inch commercial XACTA Fence II with T-square design, which enhances accuracy, performance, and safety. Made with high-end materials that are precisely welded to create a tough, accurate fence system, this fence also glides easily and locks down firmly for improved consistency.

Riving Knife System for Safe, Fast Blade Changes

The XACTA SAW Deluxe comes complete with a quick-change riving knife system that incorporates maximum safety with ease of functionality. It reduces the risk of binding/kickback, and it features a tool-less design to make blade changing quick and easy, which saves you time and helps boost productivity. Additionally, this knife system works in conjunction with a push-button arbor lock (patent pending) to make blade changes even faster.

Cast-Iron Extension Wings and Heavy-Duty Trunnion for Flexibility

This saw also includes 11-inch left and right cast-iron extension wings that add up to the largest table surface in its class, and a left tilt, wide-stance, heavy-duty trunnion for smooth blade positioning. Both provide you with the flexibility to handle even big jobs with ease. Additionally, the precision-ground tabletop features a front edge bevel for hassle-free workpiece positioning.

Upgraded Poly-V Belt System for Smooth, Quiet Operation

To help ensure smooth, quiet operation, the XACTA SAW Deluxe includes an upgraded poly-V drive belt system that delivers low-noise, highly efficient operation. This system also helps ensure optimal power transfer for consistent performance.

Deluxe Miter Gauge and Handwheels for Accuracy

A deluxe miter gauge with adjustable positive stops and large, soft-grip handles ensure both large crosscutting capacity and accurate miters, while heavy-duty, chrome-plated handwheels contribute to smooth trunnion and arbor movement, so you don't have to worry about jarring movements compromising your results.

Protective Design Guards Against Dust Damage

To help protect machine parts from damage caused by dust and debris, the XACTA SAW Deluxe comes complete with a hinged motor cover on the cabinet that gives you quick access to the motor and belts, a completely shrouded blade, and a built-in four-inch port for dust collection. Also built in is the 12.5 x 18 x 4-inch storage drawer, which is sealed from the cabinet and keeps your necessities dust-free yet within arm's reach.

Safety Features to Protect Operator

To help ensure operator safety, the rail-mounted magnetic switch is easy to reach and provides overload protection, while the independent leaf safety guard protects the user from the blade while cutting, even at a 45-degree tilt.

Durable Design for Longer Life

Built to last, the XACTA SAW Deluxe has a powder-coated paint finish that's long lasting and chip resistant. It is covered by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products

Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box

Table saw, one switch, one table insert, two extension tables, one side cover, one blade guard assembly, one riving knife and pawl assembly, one handwheel and swivel handle, one lock knob, two large hooks, one small hook, one push stick, one miter gauge assembly, one 27-millimeter arbor wrench, manual, and warranty card.

From the Manufacturer

If you've ever wondered about what a tablesaw can really do, look no further. Introducing the new JET¿ 10" DELUXE XACTA¿ SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA¿ SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• POLY-V DRIVE BELT SYSTEM: Delivers efficient, quiet operation.
• SHROUDED BLADE AND 4" DUST COLLECTION PORT: Increases dust collection efficiency.
• BUILT-IN, SEALED STORAGE DRAWER

User questions & answers

Question:	How long does the blade keep spinning after turning it off
Answer:	I haven't timed it but about 20 seconds or less.
Question:	does the saw come with the rip fence
Answer:	Yes it comes with everything but a blade. This is an excellent saw.
Question:	To clarify what would I need to get this from the truck to my garage? or will the lift truck have a dolly or something to bring it inside
Answer:	If the truck can get to your garage it will not be a problem. If not you will need something to bring it in from the road. Tractor or such.
Question:	I notice a white section on the right side of the table saw, is that wood or cast iron
Answer:	Laminated wood top on the right side of the saw.

Product description

Bring some of the Gold standard home to your workshop with the Powermatic PM1000 Cabinet Table Saw. The PM1000 is the first Powermatic cabinet table saw that is wired for 115V usage. This table saw runs off a 1-3/4HP motor with a poly-v belt that reduces vibration and maximizes motor efficiency. Not to mention its superior dust collection power. Feel at ease when it comes to accuracy with Powermatic's exclusive 30" Accu-Fence system that gives you the work space and stability that you need.

• EFFICIENCY: A blade surround and collection hose provide an unobstructed path, maximizing dust collection.
• SIMPLICITY: Arbor lock allows for one-handed blade changes, with minimal tools.
• COMFORT: Ergonomically-designed 7” handwheels provide momentum (making blade height and bevel adjustments easy).
• STURDY: Precision-ground cast iron work surface features a beveled edge for smoother operation.
• SAFETY: Tool-less guard assembly with independent side leaves is easy to use, maximizing safety.

User questions & answers

Question:	can i mount a cast iron extension table for my router on the left side? I dont see any holes
Answer:	Hey Jeffery.I looked under the table and what I see is that the table itself is an "egg crate" casting to give the table strength with relative weight savings. The edge of the table (left side) has been cast flat, or parallel, with the outside vertical surface i.e. it's not tapered. That is good news for you because it can be drilled. The flat surface on the inside will allow for a washer and nut to hold in place without slipping. The question of router table weight is the concern. If it were mine I would provide a support leg under the attached table, either plumbed vertical or diagonal back toward the base of the saw. good luck.
Question:	Does the tablesaw come in one box? If not how many boxes and the respective dimensions please
Answer:	It comes in several boxes stacked on a pallet. The wooden pallet is approximately 3.5 ft by 3.5 ft and it is stacked 4 ft tall. It is all wrapped together on the pallet with plastic wrap. The truck driver moves it around using a pallet jack.
Question:	Are the trunnions cabinet mounted or table mounted
Answer:	They do mount to the cabinet frame, but they actually look a lot like the table mounted trunnion brackets. They're an improvement from table mounted trunions, but are not the large industrial yoke style brackets that span from corner to corner of the cabinet that many of us associate with the term "cabinet mounted trunnions". Instead, they bolt to front and rear frame struts...very similar to the Jet Proshop system. You can view the exploded parts pictorial in the manual to get a better idea of the trunnion system.
Question:	So which would be the best saw to buy: (other than cost) the pm1000 or the 64b? and why? i'm having a tough time deciding
Answer:	I looked at the same comparison and chose the PM1000. Reasons: (1) Mass. The PM1000 weighs significantly more, and thus will have less vibration/undesired movement during use. (2) Trunnion mounting is reportedly more secure in PM1000 vs 64B. (3) Switch. The magnetic on/off switch of the PM1000 is much more readily accessed with a knee or a blind reach with a hand while keeping eyes on the work. (4) Dust collection. Appears to be much better with PM1000, as long as one has a decent dust collection plan/system. (5) Assembly. (Unsure about this one.) I’ve been told there’s much more assembly to be done with 64B than with PM1000.

Product features

PM1000, 30" RIP with Accu-Fence System, 1.75 HP, 1PH

Evolution represents a process that is never fully complete. For a woodworker, inspirations evolve as life experiences shape our creativity. Skills evolve as we share tips and techniques with friends and mentors. And our workshops evolve as we refine our skills. At Powermatic, we're proud to introduce the latest example of our own evolution, the PM1000 cabinet table saw. As with every product Powermatic builds, the PM1000 redefines the limits of design, innovation and durability.

Product description

Introducing the 14 Table Saw Dust Collector Hood by POWERTEC. This well crafted dust collector table saw accessory works with an assortment of workshop woodworking applications, enhancing the efficiency of catching sawdust, dirt and debris. The dust hood features a 14 inch opening for optimal extraction and productivity. For convenience, this hood is a nominal 4 OD and was designed to fit the standard 4 inch ID dust collector hose. With the appropriate adapter, it is able to connect seamlessly to your Shop Vac, and can be utilized in a variety of positions, including beneath, behind or any convenient location on your machine. This also makes it suitable for a wide range of table saws, planers, drill press, sanding machines, and more. In addition, it possesses universal compatibility that accommodates many popular brands, including Delta, Ryobi, Craftsman and others. 3 Common Applications Solutions • Delta Contractor • Craftsman Table Saw • Ryobi Table Saw Premium Build The POWERTEC Table Saw Dust Hood was made with high quality ABS plastic. Whether attached to your table saw, planer or sanding equipment - this lightweight material ensures an impact resistant, anti-scratch and durable component built for everyday use. POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, machines, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovations, technology, and product development to the industry.

• INCLUDES: 14” Table Saw Dust Collector Hood
• FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris
• VERSATILE: Firmly attaches and secures to most table saws in a variety of positions (underneath or behind) and is ideal for a plethora of popular brand models, including Delta, Craftsman and others
• PREMIUM BUILD: Made with lightweight ABS plastic, featuring a high quality construction designed for strength and long-term durability to support your dust collection system
• DIMENSIONS: Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) and accepts standard 4” ID dust collector hose or 4” ID fittings

User questions & answers

Question:	More photos would be useful. Maybe a side view to show profile. And installed on a saw. Anyone
Answer:	I can get one but don’t have one right now
Question:	I have an older 10" craftsman table saw which i want to use this for dust collection in conjunction with a dust deputy. what adapters would i need
Answer:	I am in the same boat...I have the Craftsman 10" Table Saw Model # 218073. It comes with a bag, but I really want to eliminate sawdust so I am getting the Dust Deputy. What do you recommend I will need to attach this hood?
Question:	What’s the i.d. and o.d. of the dust port
Answer:	o.d. 3 3/4" i.d. 3 1/2" The 4" hoses fit it well.
Question:	Will this work with a Ryobi table saw
Answer:	You need to measure the opening below your saw where the sawdust drops to the ground. The dust fitting measures exactly 14 1/16" X 14 1/16". I attached mine with 1/2" self tapping sheet metal screws and it works great with my dust collector!!

Product description

The Rockwell BladeRunner X2 Portable Tabletop Saw is the solution to the problem of having to take materials back to the workshop to cut them, and then bring them back to the job site later on. If you’re a contractor, you know that that process can add an entire day to a project. The BladeRunner is only 15 lbs, so while stable and sturdy, it’s easy to toss in the back of the truck. And with a footprint of only 15.75” x 17”, it doesn’t take up an entire workbench like traditional table saws. The hold-down guard and splitter allow for work with wider materials, and a larger rip fence than other portable table saws provides better control and accurate cuts. A no-load speed of 3000/min, a stroke length of ¾”, with 5.5 amps of power gives it the capacity for light to moderate cutting of wood (up to 1-1/2”), ceramic tile (3/8”), PVC pipe (1-1/4”), aluminum (3/8”), and steel (1/8”). (Anything over 1-1/2” and you’re probably going to need a traditional, permanently fixed tabletop saw—but you can’t take that to the job site.) The blades change out almost instantly, in under 3 seconds once you get the hang of the tool-less blade change system. And the saw is protected by a Rockwell 3-year limited warranty, so you know they stand behind their tools.

• [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle
• [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts
• [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, aluminum, and metal
• [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects
• [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw
• [SAFETY SWITCH] Prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut

User questions & answers

Question:	What is the difference between this unit and the RK7321 BladeRunner
Answer:	It is a 30mm arbor. You have to get metric sizes in blades.
Question:	how would it work w/ making pinewood derby cars
Answer:	the tacklife saw blade has that size arbor ans 120 teeth
Question:	Can it hold up to regular use with 1" hardwood like maple and ash? If not, what will
Answer:	Yes, it can be replaced.
Question:	Is the table made from plastic? It is hard to tell if it is made from black plastic or anodized aluminum
Answer:	No it is not.

Product features

Adjustable Miter Gauge

Make cuts from 0-60° so you can tackle all common woodworking projects that require miter cuts.

Accessory Storage in the Base

For easy transport and organization, just pop the rip fence, miter gauge, and extra blades into the bottom when not in use.

Portable and Powerful

A table saw that you can take with you to the job or easily move around the workshop. Convenient carry handle makes it easy.

Capability of Larger Table Saws

Rip, cross, scroll, and miter cuts are all possible thanks to the standard guard and riving knife system.

5 Blades Included

Wood, ceramic, plastic, aluminum, and metal. Plus, the tool-less blade change system accepts any brand’s standard 4” T-shank blades.

Weighs Only 15 Lbs. for Easy Transport

Throw it in the back of the truck and take it to the job site. That’s not something you can do with a traditional, permanently installed table saw. Saves time when you don’t have to bring materials back and forth between the workshop and worksite.

Make Miter Cuts 0-60° for a Wide Range of Projects

Even though it’s compact, this saw features a standard guard and riving knife system to give you the flexibility and performance of larger table saws. And 5 blades are included to get your started right out of the box.

Product description

The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick-release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts.

• NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily.
• QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes.
• IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection.
• CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible.
• CSA CERTIFIED: For added safety, this saw follows strict guidelines and electrical requirements.

User questions & answers

Question:	does this have a sliding table
Answer:	The fence slides the table itself is a mobile table that’s attached to the saw.
Question:	What is the horsepower rating of the motor
Answer:	It has a 1 3/4 horsepower motor
Question:	Does this have a left hand tilt
Answer:	Yes the blade tilts to the left for your angle cuts.
Question:	How many horsepower
Answer:	It has 1 3/4 HP, 1 Ph, 60 Hz and it is 120 V, 14.8 A, with a output of 4000 RPM.

Product description

The Shop Fox W1837 has plenty of power with its 2 HP motor to easily rip through hardwoods or cut dadoes, yet it's still light enough to move around the shop. This saw is sure to be envy in any shop or worksite.

• 2 HP, 120V/240V, single-phase motor prewired to run on a 120V, 20A circuit
• Enclosed cabinet bottom with 4" dust port
• Precision-ground cast iron table with steel wings measures 401/4" x 27"
• Rip capacity: 30" to right, 15" to left
• Lift-off fence with front/rear locking ability

User questions & answers

Question:	How soon will be shipped from the day of order
Answer:	It was 28 days from the date it was ordered to the date it was delivered. And then an additional 2 weeks to receive critical parts that were missing from the saw.
Question:	Is the blade plate level with the table
Answer:	Blade plate is adjustable with set screws
Question:	what is the dato size and width
Answer:	Dear Maria Horstmann,Thank you for your question. The maximum dado width is 13/16 in. If you have additional questions please contact our SHOP FOX Technical Service Team at 800-840-8420 ext. 2 or email [email protected].
Question:	how do you remove the riving knife or blade guard
Answer:	Can you remove the guard without removing the riving knife?

Product features

Shop Fox W1837 Open-Stand Hybrid Tablesaw

With the Shop Fox W1837, you get the best of both worlds. The easy-to-transport weight and size of a high-end contractor saw, but with dust control and the full features of a cabinet saw. Just like the Shop Fox professional cabinet saws, this hybrid also has a quick-change blade guard with anti-kickback pawls that can be positioned away from the workpiece. This saw will surely be the envy of any that see it in a shop or worksite.

Interchangeable true riving knife

The interchangeable true riving knife offers protection for non-through cutting operations that require you to remove the blade guard.

Built-In Mobile Base

The W1837 features a handy built-in kickstand operated mobile base. With a simple push down on the foot levers the machine rises off it's otherwise stable feet to become mobile so you can easily move it to your new desired location.

Robust Cabinet Mounted Trunnions

Just like standard cabinet saws, the W1837 trunnions mount to the cabinet for superior performance. The robust cast iron trunnions absorb vibration, ensure proper blade-to-fence and miter slot alignment and make blade height and angle adjustments a breeze.

Enclosed cabinet bottom with 4-inch dust port

The enclosed cabinet bottom features a dust chute with a 4-inch port. Keep your work area free of dust and debris when connecting a dust collector with at least 400 CFM available.

Blade Tilt

The blade can tilt to the left from anywhere between 0 and 45-degrees. Great for cutting bevels, compound miters or chamfers. Easily adjust your cutting angle by loosening the blade tilt lock and turning the blade tilt handwheel to position the blade at the desired angle, then lock it in place for consistent repeat angled cuts.

Quick‐Release Blade Guard Assembly

The W1837 blade guard assembly consists of important safety features.

The clear guard allows the operator to watch the blade cut the workpiece during operation while maintaining a barrier around the blade that prevents accidental contact and keeps flying wood chips contained.

The spreader/riving knife is a metal plate that prevents the newly cut kerf in the workpiece from pinching the back side of the blade, and otherwise causing potential kickback.

The anti-kickback pawls allow the workpiece to travel in only one direction. If the workpiece moves backwards, such as during a kickback, the pawls will dig into the workpiece to slow or stop it.

Product description

Features & benefits: powerstate™ Brushless motor: purposely built for the M18 fuel™ 8-1/4" Table saw to generate the power and performance of a 15A corded Circular saw. redlink plus™ intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire m18™ system. redlithium™ high output HD12.0 battery pack: provides 50% more power and runs 50% cooler versus standard redlithium™ HD packs. Superior pack construction provides the industry's best protection against jobsite conditions. 24-1/2" rip capacity to rip 4x8 sheets of plywood or OSB rack and Pinion fence system for square cuts and easy adjustment The Milwaukee M18 fuel™ 8-1/4” Table saw with one-key™ generates the power of a 15A corded saw, 24-1/2” of rip capacity and up to 600 linear feet of cutting per charge. Designed for professional Carpenter, remodeler and general contractor the Milwaukee M18 fuel™ 8-1/4” Table saw with one-key™ is optimized for power, portability and productivity. The powerstate™ Brushless motor provides 6, 300 RPM and higher speeds under load for corded cutting performance. Redlink plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 Lithium high output HD12.0 battery delivers unmatched run-time in all applications. The Rack and Pinion fence system maintains accuracy and allows for Quick adjustments. For maximum productivity, the tool has on board storage for the included accessory and a tool free guard and riving knife changes. An all metal frame provides durability for daily jobsite use.≪ br/>.

• Product is manufactured in China
• This product meets customer requirement
• 5 year warranty on material and workmanship

User questions & answers

Question:	Can someone with a sound meter measure how loud it is at 3ft away with load and no load
Answer:	It is plenty quiet.
Question:	Can I know the bore of saw blade
Answer:	It will cut A 1 1/2 in. possibly 2 " inch max depth
Question:	can you use it corded
Answer:	No it is cordless which is its main feature.
Question:	Is there a stand included
Answer:	No, there is no stand

Product description

Replace your factory table saw insert with a phenolic zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts.

• Insert Dimensions: 12-1/2” x 3-9/16” x 7/16” - JT-164 Jet/Powermatic 64A Zero-Clearance Table Saw Insert
• Made from high-density phenolic laminate with a bonded-melamine surface
• Small Jet, Grizzly, Powermatic 64 insert will fitvarious models of table saws.
• Includes leveling screws, side and end adjustment screws;pre-cut blade bottom pocket
• Please check your Length x Width x Thickness of your current insert before ordering

User questions & answers

Question:	Im looking for a zero clearance insert for a dewalt dwe7480. Will this fit
Answer:	Simple answer is to measure your slot opening or you can make your own from material you might have around the shop. It's not highly technical if you have much shop experience.
Question:	can you spin it around so the finger hole is facing the back of the saw so you can make a dado opening
Answer:	I see no reason why one can't spin it around. There are areas underneath that are hollowed out, but that shouldn't interfere with creating a dado opening.
Question:	Will this fit Powermatic PM
Answer:	Measure first!!!
Question:	Will this work on a kobalt table saw
Answer:	I'm not sure, but don't count on it. Each manufacturer had their own design measurements. I learned this the hard way by buying an aftermarket zero tolerance for my Grizzly tablesaw, and it didn't fit. So your caution is justified.

Product description

Delta 34-154 Standard Table Insert for Right Tilt Unisaws and Contractors Saws

• Standard table insert for table saws
• Country Of Origin: China
• Model Number: 34-154
• Item Package Dimension: 17.5" L x 4.0" W x 0.5" H

User questions & answers

Question:	what are the dimensions LxWxT
Answer:	13.5X3.75X.5, be sure to get the type that you can change out the inserts.
Question:	what are the dimensions of this product
Answer:	3.75 in x 13.25 in
Question:	Does this insert work for the 36-441B table saw
Answer:	It should, it is a Delta. Just be sure you order the correct hand for the tilt. You will not be sorry investing in this insert. Also be sure to order a package of inserts for the plate as after a while they will get chewed up some, and you will want one just for the dado blades. RG
Question:	Will this insert work on the Delta Model 36-650C
Answer:	It fits my model 36-653. Don’t know what the difference would be between the models

Product description

A versatile dust collection system that fits 2. 5” and 4” dust collection systems

From the Manufacturer

A versatile dust collection system that fits 2.5” and 4” dust collection systems

• 2.5” and 4” ports fit most dust collection systems
• Easy-to-use clamps make redirecting the internal tube a breeze
• Quick and easy to install
• Durable materials
• Required for installation of Overarm Dust Collection

User questions & answers

Question:	can you just use the 4" port? I do not have above the saw dust collection so I di not need the smaller port
Answer:	i just use the 4" port (i connect my dust system there). You can use just one of the ports ( as far as i know). If you're putting the dust collection bit on the saw - i would recommend attaching a vacuum to it. cheers
Question:	What are the od and id's of the 2 1/2" port on the cns-dcp dust collection panel
Answer:	Thanks for the question! The OD is 2.5” and the ID is 2.25”
Question:	Will this system work on a porter cable 10 " table saw
Answer:	Thanks for the question. We don't do any compatibility testing with other brands of saws. Since this accessory is designed specifically for our Contractor Saw, it is likely that it won't fit.
Question:	Does this come with hoses to attach to the 4" port that's under the saw
Answer:	Thanks for the question. Yes, a hose is provided to connect the Dust Collection Panel to the 4" port that is under the saw. However, we do not provide a hose to run to your dust collection system.