14 best flat bottom drill bit for wood

Product description

This set contains the seven smallest sizes of Freud's Forstner Bits. These bits will drill flat bottom holes, pocket holes, or over lapping holes. Part #PB-001, 1/4" dia.; Part #PB-003, 1/2" dia.; Part #PB-005, 3/4" dia.; Part #PB-005, 1" dia.; Part #PB-002, 3/8" dia.; Part #PB-002, 3/8" dia.; Part #PB-004, 5/8" dia.; Part #PB-006, 7/8" dia.

From the Manufacturer

Precision Shear Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producingflawless flat-bottom holes. This unique geomtric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition to serrated edges, Precision Shear Forstner Bits include a hardened steel body for longer life and sharper edge, an ultra sharp spur to ensure accurate holes and less "walking", and steep angled cutting edges to produce holes that are smooth and flat. This set contains 1: 1/4", 1/2", 3/4", 1", 3/8", 5/8" and 7/8" bits.

• This set contains the seven smallest sizes of our Precision Shear Forstner Bits
• Size ranges from 1/4" diameter to 1" diameter
• Drills flat bottom holes, pocket holes, and overlapping holes
• Recommended for drilling in plywoods, hardwoods, and softwoods,
• Use in hand held drills and drill presses, Imported

User questions & answers

Question:	Do these have a carbide cutting edge
Answer:	Yes my roommate and I play it with it. It's very difficult with high sensitivity in my eyes anyhow. So I changed it to the lowest and it's a blast
Question:	Where can I find a nice wooden storage case for this set
Answer:	Know for a fact it works for the ps4 pro and I don't see why it wouldn't with xbox. The setup for the wheel for multiple platforms is pretty simple there's a usb port on the back side of the shifter plug the usb into the wheel and into either your ps4 controller or xbox controller without turning on the controller first. Preferably before even turning on the system I would hook up everything and turn on at the console. Then once it comes on just hit the home button on the wheel it's self and within a few seconds it should be acting as your controller. Hope this helps
Question:	I have the 7 piece set that steps by 1/8th". Is there a companion set that has the half sizes? For example, the 9/16th, 7/16th
Answer:	I don't not know my son has a Ps4 and it works perfect with it
Question:	Forstner bits with 1/2" shanks
Answer:	NO.

• 🛠️【High quality material】High quality alloy blade, hardened, tempered and carbon HSS steel construction make blade more sharp and durable.
• 🛠️【Great performance】Sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness. Forstner Drill Bits can drill clean flat bottom holes with no chipping.
• 🛠️【Perfect Design】Small incision resistance, improve the opening speed;curve design is beneficial to chip removal. Perforation is more efficient.
• 🛠️【Application】Perfect used for drawer, mounting spherical door shoot tip; perforation on wood products, plastic products etc.
• 🛠️【Perfect size】15mm（19/32"）, 16mm（5/8"）, 17mm（43/64"）, 18mm（45/64"）, 19mm（3/4"）, 20mm（25/32"） , 21mm（25/32"）, 22mm（55/64"）, 23mm（29/32"）, 24mm（15/16"）, 25mm（1"）, 26mm（1-1 / 42"）, 28mm （1-1 / 10"）, 30mm（1-3 / 16"）, 32mm（1-1 / 4"）, 35mm（1-3 / 8"）, 40mm（1-3/5"）

User questions & answers

Question:	What is the standard shank length on these bits
Answer:	You can position a manual stick shift add on in a couple different places. And yes, it comes with different bolts to attach the steering wheel.
Question:	What specific sizes are included in this set
Answer:	Yes, when folded down you're able to keep the wheel and pedals on it
Question:	Can i use these with my lathe
Answer:	I have that flight stick but I just looked at it and it would take some engineering to mount it but it would sit on the table part.
Question:	What is the shank size of these bits
Answer:	The mounting points for the G923 are the same as the G920. Yes, they will fit on this stand.

Product features

Features:

►Made of high quality Carbide Tungsten Steel, with hot process, high hardness, high precision, high toughness, smooth cutting and high resistance to impact.

►It is more accurate and safer to use these drill bit sets in a drill press.

►The head is good at removing the debris and working efficiently with curved design.

►The tip is specially designed to cut through hole cleanly, great for boring concealed hinges and door locks.

►This set of woodworking Forstner Drill Bit Set is high hardness, wear resistance, good toughness, heat and corrosion.

►Applicable to various gypsum board, plastic board, wooden board,solid wood, artificial wood, all kinds of wood, woodworking than indispensable woodworking gadgets.

►Perfect Size:15mm（19/32"）, 16mm（5/8"）, 17mm（43/64"）, 18mm（45/64"）, 19mm（3/4"）, 20mm（25/32"） , 21mm（25/32"）, 22mm（55/64"）, 23mm（29/32"）, 24mm（15/16"）, 25mm（1"）, 26mm（1-1 / 42"）, 28mm （1-1 / 10"）, 30mm（1-3 / 16"）, 32mm（1-1 / 4"）, 35mm（1-3 / 8"）, 40mm（1-3/5"）

High Quality Carbide Tungsten Steel, Curved Design for Optimized Chip Removal

• High quality Carbide Tungsten Steel, special heat treatment technology, sharp edge, high hardness and durability.
• The cutter head arc design improves the opening speed, easy chip removal, and less dust and debris in the cutting operation.

Three-tooth Cutter Head with Small Incision Resistance

• The three-tooth design of the cutter head has high sharpness, small cutting resistance and improved opening efficiency.

Sturdy Blade, Round Handle

• High-speed steel shank with strong shank for machine tool drilling, charging drill, bench drill and other machines

Step1

Step2

Step3

Step4

Desk Opening

• Wooden furniture such as Cabinets, Doors, Drawers, etc.

Wooden Board Opening

• Suitable for all kinds of Plate Openings

Hinge Opening

• Suitable for all kinds of Wooden Door Hinge Openings

Compatible Models

• Charging drill, Hand drill, Bench drill, etc.

Product description

Make clean cuts in 5 different sizes with the WEN 16-Piece Forstner Bit Set.

This package includes a 35mm(1-2/5"), 40mm(1-3/5"), 45mm(1-7/10"), 50mm(1-9/10"), 60mm(2-2/5") bits.

Each bit uses a 3/8- in. shank and an X-wing design for precision, stability and visibility.

The center spur of each bit guarantees accurate drilling and prevents walking and wobbling

during operation. Your sixteen bits can be stored away easily between jobs with the included carrying case.



Precision Shear’s razor sharp edge for flawless flat-bottom holes



Multiple cutting edges for fast drilling and efficient cutting



Hardened steel body for longer life and sharper cutting edge



Angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip remove



Each bit comes in a plastic bag inside its own separate thin plastic box

• This forstner bit set excels at doweling, creating pocket and grommet holes, countersinking screws and drilling out knots in wood
• Forstner bits feature a double-ground, razor sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping
• High-speed steel wood drill bits for longer life and angled sharper cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal
• Forstner bit equal to 10MM electric drill, bench drill, high power electric grinding, pneumatic drilling, magnet drill, pistol drill
• Package arrive include 35mm(1-2/5"), 40mm(1-3/5"), 45mm(1-7/10"), 50mm(1-9/10"), 60mm(2-2/5") forstner power tools drill bits used for wood products perforation

User questions & answers

Question:	Can this be used in a regular power drill? if not, please tell me what i should be typing in the search bar. new to woodworking. thanks
Answer:	Make a small stand from apiece of wood drilled the size of the shank. Then use a cigar box or similar to store these. Goodwill would be a good place to find a wooden box.
Question:	How many comes in this? Says 16 piece
Answer:	no freud nont make drills in 1/16 steps but i have ground a cheap drill very carefully to to the right size for a one off size hole
Question:	How are these held by the drill? It doesn't look like these have a hex base
Answer:	Shank size varies with bit size--in this set the smaller bits have a 1/4" shank, the middle bits have 5/16" shank and the larger bits have 3/8" shanks.

Product description

New Precision Shear™ Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner Bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear™ Forstner Bits has serrated edges. RH Rotation, 3/8" Boring Shank, 3-1/2" Overall Length (H), 1-1/4" Cut Diameter Ideal For: Drilling flat bottom holes, pocket holes, or overlapping holes. Application: Drills plywoods, hardwoods, and softwoods. Made In Italy.

From the Manufacturer

Precision shear forstner bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition to serrated edges, precision shear forstner bits include a hardened steel body for longer life and sharper edge, an ultra sharp spur to ensure accurate holes and less "walking", and steep angled cutting edges to produce holes that are smooth and flat.

• Razor sharp serrated edge for fast and flawless cutting
• Quality Forged Construction for extended life
• Ultra Sharp Spur to ensure an accurate starting hole
• Steep Angled Cutting Edges – produce holes that are smooth and flat, and create “chisel-like" curls for fast, clean chip removal.

User questions & answers

Question:	Can this be used on 1/4 inch phenolic
Answer:	Dear customers, our bits's sizes are included 15mm（19/32"）, 16mm（5/8"）, 17mm（43/64"）, 18mm（45/64"）, 19mm（3/4"）, 20mm（25/32"） , 21mm（25/32"）, 22mm（55/64"）, 23mm（29/32"）, 24mm（15/16"）, 25mm（1"）, 26mm（1-1 / 42"）, 28mm （1-1 / 10"）, 30mm（1-3 / 16"）, 32mm（1-1 / 4"）, 35mm（1-3 / 8"）, 40mm（1-3/5"）
Question:	Can a 40.6 mm fostner bit be made
Answer:	Yes if you have the drill-head attachment. I probably would not use the smaller size though
Question:	Can it be used in plastic barrels? If not what drill is being used best
Answer:	The shank size, like most drill bits, vary in size, depending on the working part of the bit.
Question:	Will this work with douglas fir? Im trying to drill a 2" hole in a 4 x 4 douglas fir post
Answer:	Nope. However haven't had any problems at all with this set. Hardened steel and the method of cutting has been a charm.

Product description

New Precision Shear™ Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive Forstner Bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shear™ Forstner Bits has serrated edges.

From the Manufacturer

Precision Shear Forstner Bits feature a double-ground, razor-sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producingflawless flat-bottom holes. This unique geomtric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition to serrated edges, Precision Shear Forstner Bits include a hardened steel body for longer life and sharper edge, an ultra sharp spur to ensure accurate holes and less "walking", and steep angled cutting edges to produce holes that are smooth and flat.

• 3/4" Dia.
• Razor sharp serrated edge for fast and flawless cutting
• Quality Forged Construction for extended life
• Ultra Sharp Spur to ensure an accurate starting hole
• Steep Angled Cutting Edges – produce holes that are smooth and flat, and create “chisel-like" curls for fast, clean chip removal.

User questions & answers

Question:	Anyone know if this is exactly 3/4"? I have a porter cable set and the 3/4" bit measures .740 which will not work for my current project
Answer:	You can use them with a regular drill. It's just easier to have straight 90° holes if you use a drill press.
Question:	Is this 3/8 in diameter
Answer:	Yes
Question:	Will this bit fit into an impact driver
Answer:	This seems like a strange question as most of the drill bits I use don't have hex shanks. Just put the bit in the drill chuck and tighten it down. The pressure from the chuck jaws will hold it firmly.
Question:	What is the max RPM speed at which this bit is rated
Answer:	They are short. Around 2.5 to 3 inches,depending on the bit. Add another inch for the cuttinghead. Well worth the money IMO.

Product description

Use SD-3 Counterbores to drill a pilot hole and counterbore a flat bottomed hole in one step. Perfect for lag screws, lag bolts, washer head screws, T-nuts & more.

• Drive Shank: 1/4 Inch Hex Power Bit Shank
• Drill Size: 1/4 Inch
• Counterbore Size: 3/4 Inch

User questions & answers

Question:	Can the 3/8" drill be taken out and replaced by a 3/8" rod
Answer:	Yes, choose the right speed on a drill press.
Question:	is this ok to use on metal
Answer:	Sure, it can. Contact your local high end machine shop and order one. They can custom make what ever size you need. A 40.6mm is not a standard size you would find from a commercial vendor. I have had custom bits made by a machine shop. They are not cheap.
Question:	How long does the drill bit stick out from the beginning counter sink cutting edge
Answer:	You could use them on plastic barrels, but you are better off with a hole saw to do that. These are designed to make flat bottom holes in boards to make trays for water glasses, etc.
Question:	Can you use this for the 1/2 walnut face wood plugs
Answer:	I'm not sure never worked with Douglas fur before but it cut mahogany and popular perfectly for me. Made nice smooth holes for my fishing rod rack I just built. The bits are very sharp. I didn't even have to use a drill press just my hand drill with a depth stop

Product description

Wide Application: Used for wood, particle board, top drawer, plywood, etc.. Applicable to the pistol drill, bench drill, vertical drilling machine etc



Excellent workmanship: The effective depth is deeper, and easily resharpened, they can enlarge existing holes with ease and can bore any arc of a circle



Individual Titanium Coated Forstner Bits for use on Wood, For drilling holes in any direction and making arched openings

Drill precise flat bottom holes with no chipping in any thickness of soft wood

Designed to drill flat bottom or through holes cleanly in end grain, thin stock, veneers, and regular stock

For drilling holes in any direction and making arched openings

The drilling efficiency is higher with the three teeth cutter head. In design with curve, the head is good at removing the debris and working efficiently. Sharp and durable, strong to handle

Works with an electric drill (not included



Specification:

Material: Tungsten steel

10Pcs/set include 10 different boring diameters: 15mm/16mm/18mm/20mm/22mm/25mm/30mm/32mm/35mm/50mm



Package content:

1 x 15mm(0.59") Forstner Auger Drill Bit

1 x 16mm(0.63") Forstner Auger Drill Bit

1 x 18mm(0.71") Forstner Auger Drill Bit

1 x 20mm(0.79") Forstner Auger Drill Bit

1 x 22mm(0.87") Forstner Auger Drill Bit

1 x 25mm(1") Forstner Auger Drill Bit

1 x 30mm(1.18") Forstner Auger Drill Bit

1 x 32mm(1.26") Forstner Auger Drill Bit

1 x 35mm(1.38") Forstner Auger Drill Bit

1 x 50mm(2") Forstner Auger Drill Bit

• Made from Tungsten steel and being hot-treated, the blade is characterized by high accuracy, smooth cutting operation, good resistance to shock and good toughness
• Individual Titanium Coated Forstner Bits for use on Wood, For drilling holes in any direction and making arched openings
• Precision ground for heavy use and easily resharpened, they can enlarge existing holes with ease and can bore any arc of a circle
• 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance, drill precise flat bottom holes with no chipping in any thickness of soft wood, for drilling holes in any direction and making arched openings
• 10Pcs/set include 10 different boring diameters: 15mm/16mm/18mm/20mm/22mm/25mm/30mm/32mm/35mm/50mm

User questions & answers

Question:	where are they manufactured
Answer:	Using my Shop Fox caliber I measured it exactly 3/4 of an inch.
Question:	How long are these
Answer:	description states 3/4 inch x 3/8 inch shank. Means the drilling bore is 3/4 inch and shank for your drill is 3/8 inch
Question:	what is the diameter of the drive shaft? Is it 0.375" or 9.5mm
Answer:	It doesn't fit in my Porter Cable driver. I think the chuck on most drivers are pretty much standardized. Not to mention the round shaft wouldn't work in a driver's chuck. So, you will need a drill.
Question:	does it come with a case
Answer:	don't know for sure, but if you are using a "normal" router, it will be just fine. Usually these run at under 25,000 rpm

Product description

Features: Made from hard cemented carbide, these wood drill bits will perform quite well in woodworking hole drilling.

These bit include a center point which guides it throughout the cut and incidentally spoils the otherwise flat bottom of the hole. The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely. The hole boring bits have radial cutting edges to plane off the material at the bottom of the hole.

There are 16 different sizes of drill bits that you can use for different purposes.

Spec:

Material: Cemented carbide

Cutting Diameter:

15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 28mm, 30mm, 32mm, 35mm

Quantity: 16pcs

Weight: 764g(approx.)

Package Includes:

16 x Bits

• There are 16 different sizes of drill bits that you can use for different purposes.
• These bit include a center point which guides it throughout the cut and incidentally spoils the otherwise flat bottom of the hole.
• The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely.
• The hole boring bits have radial cutting edges to plane off the material at the bottom of the hole.
• Made from hard cemented carbide, these wood drill bits will perform quite well in woodworking hole drilling.

Product description

Yakamoz 5Pcs Carbide Forstner Drill Bit Set Hinge Hole Saw Cutter

Feature:

 - Forstner bits are a great choice for cutting clean and accurate flat bottom holes.

 - rill clean and accurate holes in soft wood, solid wood, plywood and MDF.

 - Except for the slight notch created from the center spur, the resulting holes are clean and smooth.

 - The 10mm shank is compatible with all standard drill and drill press chucks.

 - Constructed with hardened steel body for increased rigidity and the carbide blades add longevity to the bits life.

Specifications:

Shank Size: 10mm

Cutting Diameter: 19/32" (15mm), 25/32"(20mm), 1" (25mm), 1-3/16" (30mm), 1-3/8" (35mm)

Body Material: Hardened Steel

Blade Material: Tungsten Carbide Steel

Package Included:

5 x Forstner Drill Bits

• 5 Different Cutting Diameter for your choice: 19/32" (15mm), 25/32"(20mm), 1" (25mm), 1-3/16" (30mm), 1-3/8" (35mm)
• The middle spur helps center the bit, while the outer rim helps maintain the bits position when drilling angled or overlapping holes.
• These bits with 10mm round shank are ideal for drill presses, electric and cordless drills to cut all types of soft wood, plastic, plywood and other low hardness materials.
• Made of tungsten carbide steel provides maximum strength for durability and long life.
• Widely use on industrial hinge installation, wood processing and maintenance, model production, installation of spherical door, drawers and other occasions.

User questions & answers

Question:	What is the recommended rpm speeds on the different size forstner drills
Answer:	You should test this before trying on an assembly. The 3/8 inch counter bore would 1/16 inch from the edge. If your drill center is not dead on center you will break through the radius edge of the plug. I hope this helps.

Product description

Includes 1/4 in. Forstner Bit, 3/8 in. Forstner Bit, 1/2 in. Forstner Bit, 5/8 in. Forstner Bit, 3/4 in. Forstner Bit, 7/8 in. Forstner Bit, 1 in. Forstner Bit, 1-1/8 in. Forstner Bit, 1-1/4 in. Forstner Bit, 1-3/8 in. Forstner Bit, 1-1/2 in. Forstner Bit, 1-5/8 in. Forstner Bit, 2 in.

From the Manufacturer

Porter-Cable Forstner bits have optimized cutting angles for flat bottom holes. The have and open tooth design that drills clean fast holes and creates a fine smooth finish. These bits are made of hardened steel for durability and a long service life.

• Optimized cutting angles for flat bottom holes
• Open tooth design for clean fast holes
• Creates a fine smooth finish
• Designed for durability and long life
• Includes common sizes from 1/4 to 2 Inch

User questions & answers

Question:	What style of rims do these bits have; saw tooth, wavy, or knife-edge
Answer:	no
Question:	Can I ue a hand held cordless drill with these bits
Answer:	The drill bit can be taken out and replaced
Question:	Is this set made in the USA
Answer:	They are not.
Question:	What is the shank diameter of these forstner bits. I want to buy a forstner bit depth stop which only accommodates certain diameter shanks
Answer:	I purchased two sizes. On the 5/8" counterbore, the bit extends 1-1/2 inches beyond the cutting edge. On the 1/2" counterbore, the bit extends 1-1/4 inches.

Product features

PORTER-CABLE PC1014 Forstner Bit Set, 14-Piece

1/4 in. Forstner Bit, 3/8 in. Forstner Bit, 1/2 in. Forstner Bit, 5/8 in. Forstner Bit, 3/4 in. Forstner Bit, 7/8 in. Forstner Bit, 1 in. Forstner Bit, 1-1/8 in. Forstner Bit, 1-1/4 in. Forstner Bit, 1-3/8 in. Forstner Bit, 1-1/2 in. Forstner Bit, 1-5/8 in. Forstner Bit, 2 in.

Product description

IRWIN Marples Wood Drilling Forstner bits are constructed of tough carbon steel to stay sharp and produce precise pocket holes and flat-bottomed (blind) holes. The ultra-sharp cutting edges feature optimized angles to cut more quickly and accurately through hard and soft woods than traditional forstner bits. With a reduced shank, these bits fit 3/8" and larger drills and drill presses, these wood drill bits are ideal for fine woodworking, cabinet-making and more. Set includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits.

• Easily drills high-quality flat-bottomed and pocket holes
• Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently
• Significantly reduces cutting time compared with traditional forstner bits
• Reduced shank fits 3/8" and larger drills and drill presses
• Set includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits

User questions & answers

Question:	Will these bits fit an 8” WEN drill press
Answer:	3/4 in. Forstner Max 1800 RPM Softwood 1000 RPM Hardwood 1000 RPM PB-005 Freud Good Tool
Question:	Are these wavy bits
Answer:	Not 100% sure, but they appear to be of chinese origin. Not the high quality that you would expect from a pricier set, but for the one-off job they seem to work fine.
Question:	How long is the shank
Answer:	5cm (2") of boring depth
Question:	What is the country of origin
Answer:	The diameter varies with each bit. all will fit in a 12" chuck

Product features

A Great Set of Wood Drilling Bits

A power tool that is absolutely essential for woodworking, you will require a set of router bits to continue your work. As router bits come in many profiles, this bit set by IRWIN gives you a set of 8 bits in a box. All your DIY projects will now get simpler with this set of bits for your new router.

Power through DIY tasks

These bits easily drill flat-bottomed and pocket holes that feature optimized and ultra-sharp cutting teeth. Specifically engineered to cut through hard and soft woods, all your projects can be done smoothly and efficiently. This set of bits by IRWIN is great and for people who are just starting in woodworking and for professionals as well.

Product description

DeWalt brad point bits have precise cutting edges to reduce splintering and a brad point tip that reduces walking. They have engineered flutes for clean and effective chip removal. These bits are ideal for drilling precise holes in wood, and great for use in doweling. Set includes: 1/8, 3/16, 1/4, 5/16, 3/8, and 1/2-Inch bits

• Precise cutting edges to reduce splintering
• Brad point tip reduces walking
• Engineered flutes for clean effective chip removal

User questions & answers

Question:	What is the depth of cut for the 1/8” drill bit
Answer:	saw tooth
Question:	does the 1/2" bit specifically fit a 3/8" chuck? It looks to have a narrower shaft bottom but I'd like to be sure
Answer:	You probably could, but you would not get holes you would be proud to say I drilled them. you probably would be happy with the small bit up to about 3/8".
Question:	Why are you very expensive for shipping to Egypt
Answer:	All I know is that I bought it from the USA, but as to the manufacturer? No markings on case or bits, only Porter Cable.
Question:	In what country were these made
Answer:	All of the bits have a ⅜" diameter by 1⅛" long shank. The main part of the shank is determined by the size of the bit.

Product features

Brad Point Bit Set

DeWalt brad point bits have precise cutting edges to reduce splintering and a brad point tip that reduces walking. They have engineered flutes for clean and effective chip removal. These bits are ideal for drilling precise holes in wood, and great for use in doweling.

With precise cutting edges helps to reduce splintering and a brad point tip to decrease walking, the DEWALT features commonly used bits to power through wood with ease. A high-speed steel construction delivers extreme durability.

Product description

Meich Forstner Drill Bit - Providing you a portable and DIY Woodworking Tool Drill, used for mounting spherical door shoot tip, drawer; perforation on wood products, plastic products, wood and plywood etc.

Specifications:

Material: Cemented carbide

Size: 15mm(19/32in), 16mm(5/8in), 17mm(43/64in), 18mm(45/64in), 19mm(3/4in), 20mm(25/32in), 21mm(53/64in), 22mm(55/64in), 23mm(29/32in), 24mm(15/16in), 25mm(1in), 26mm(1-1/16in), 28mm(1-1/8in), 30mm(1-3/16in), 32mm(1-1/4in), 35mm(1-3/8in)

Quantity: 16pcs

Weight: 750g

Package Included:

16 x Drill Bits

Important Note:

When you using this drill bit, the materials (eg. wood, plastic products, plywood ect.) temperature will get very high, please add some water or coolant to avoid the material get smoke.

• Advanced technology manufacturing and durable material - Made from Tungsten steel and being hot-treated, the blade is characterized by high accuracy, smooth cutting operation, good resistance to shock and good toughness.
• High Quality - Small incision resistance, improve the opening speed, chip easy and no tremor. The perforation is neat, smooth, no broken edge.
• Designed for durability and long life, creates a fine smooth finish.
• 16Pcs include 16 different boring diameters: 15mm/16mm/17mm/18mm/19mm/20mm/21mm/22mm/23mm/24mm/25mm/26mm/28mm/30mm/32mm/35mm.
• Wide range of applications - Any wood and wood products, plastic, plywood and other materials you need to exquisite perforation, suitable for industrial hinge installation, wood processing and maintenance, model production, installation of spherical door, drawers and other occasions.

User questions & answers

Question:	carbide forstner bits high speed steel”+“made from tungsten steel and being hot-treated” what are the cutting edges made of? description’s ambiguous
Answer:	They use some-half inch chuck size - I expect that is the diameter size for your drill press.
Question:	Can these be used in a hand drill not just a drill press
Answer:	IRWIN 1966892 8PC FORSTNER BIT SET MARPLES INCLUDES: 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm).
Question:	Is there a case available for this set
Answer:	Overall Length: 3-1/2"
Question:	What size shank
Answer:	I think China. But they are nice for the money. Sharp and appear to be quality. Good luck!

• Specifications: Drilling dia.: 65mm; shank size: 10mm; drilling depth: 50mm; total length: 80mm. Hex shank, cemented carbide cutter and solid hardened steel body. Rotation speed (suggested): 18000-24000 RPM, feed speed (suggested): 8-12M/Min
• Applications: Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc..
• Features: Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
• How To Use: Suitable for bench drill, vertical drilling machine, hand held electric drill, impact drill, CNC carving machine and other drill press.
• Warm Tips: Can not be used for cutting metal holes. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits. Please note the cutting depth before you purchase.

Product features

Two Spurs & Center Spur

Two spurs and centering point can offer repeated, clean and accurate cutting holes. The sharp center spur accurately locates the center of your hole.

Special Design

Small incision resistance to improve the opening speed. The head adopts arc curve design for easy chip-removal and no tremor. The perforation is neat, smooth, no broken edge.

Universal Shank

Hex shank is made of solid hardened steel, with high hardness. Can be used in hand held drills and drill presses.