12 best grout removal tools

Product description

✅ Grout Removal Tool, Scraper, Scrub Brush, Tile Joint Cleaning Brush, Remove Grout or Cleaning for Tile Joints and Seams✅



Remove

- Grout

- Thinset

- Mortar

- Caulking

- Dirt

- Surface residue

For tile Joints and Seams



With around 13 inches length to clean hard to reach spots and with ergonomic soft comfort grip handle to minimize fatigue under large jobs

• ✅ VERSATILITY: Remove unwanted grout, thinset, mortar, caulking or dirt from tile joints and seams, fits any width of tile seams or deeper tile joint
• ✅ TOP HARD TIPS: Made from super hard metal Tungsten Steel, it is harder than tile and any other metal include carbide and stainless steel, durable
• ✅ HIGH EFFICIENCY: Provides eight sharp scraping edges, based on this feature, for anyone with weak hands, it is easy to remove grout or scrape away grout, thinset, mortar, caulking, dirt, and surface residue
• ✅ GO DEEPER: Provide fine tip, moderate tip and big tip, fit any width of tile seams or deeper tile joint, good for cleaning crack tiles and getting into corners and up against walls
• ✅ USER FRIENDLY: With around 13 inches length to clean hard to reach spots and with ergonomic soft comfort grip handle to minimize fatigue under large jobs

User questions & answers

Question:	Replacement blades for reetree tool
Answer:	This is a sds plus chisel bit, probably need a sds plus rotary hammer if you want use it
Question:	hi need to get replacements blades where can i get them
Answer:	SDS-Plus looks similar to SDS-MAX but is much smaller. SDS-MAX shank bits will not fit any SDS Plus rotary hammer
Question:	does the grout removal tool comes with extra heads? Where one can get replacement heads when it’s worn
Answer:	Hello. Thank you for asking. The trim puller tool also functions as a nail puller. The thin blade surface can jam the nails well, and it can pull the nails out without excessive damage.
Question:	is there a warranty on this tool? mine broke about an hour into use
Answer:	Hello. This trim puller tool is exactly what is designed to remove the baseboard from a plaster wall and does a great job on keeping the plaster wall in place. It does not damage the plaster wall if following the correct instructions.

Product description

Have you ever been bothered by the difficulty of cleaning up the crevice impurities in the tile?

Muf Grout Saw can help you clean out or remove dirty pitted grout, mortar remnants, crack impurities, paint from tiles, vinyl flooring ect, making your tiles a new look with minimum effort.

Package Included:

2 x Muf grout saw(each saw has an already installed blade)

6 x extra blades

Specifications:

Size:8 x 2.4 x 0.8 inch / 20.3 x 6 x 2 cm

Weight:95g

Color:black and yellow

Note:

As precaution, always be sure to wear protective gloves and safety goggles when clening up, and use a dust mask to protect yourself from particles and dust during the removal process.

Pointed parts included, please keep away from children.

• 【Perfect Saw for Grout Cleaning】Our grout saw removal tool is designed for cleaning out or removing dirty pitted grout, mortar remnants, crack impurities, paint from tiles, vinyl flooring ect, so you can put new grout in for a cleaner look.
• 【Ergonomic Angled Design】Muf grout hand saw is more efficient to clean out grout due to the angled-design. The special angled non-slip handle fits your hand well, helping you easily and comfortably to grip it, so you can control the direction and strength better and get into grout areas easier.
• 【Diamond-Surface Blade】The blade is made of cemented carbide granule layer, which is sturdy, durable and wear-resistant. This gritty surface may help you scrub away the old grout remnants thoroughly and effectively.
• 【6 Extra Blades Included】You will receive 2 pieces of grout saw. Each grout removing tool comes with an already installed blade and 3 extra blades for replacement. The blade is attached to the saw with two screws, which is very easy to replace.
• 【High Quality】The handle is made of ABS and TPR plastic and the blade is made of cemented carbide. It is sturdy and durable, providing you with long-lasting use. On the top of the handle there is a hole for you to hang the saw as well.

• Best for Grit Grout Removal
• Diamond Material,Universal & Quick Release
• Pack of 4 Pcs Diamond Grit Grout Oscillating Tool Blades
• Not Compatible with Bosch GOP40-30, Bosch Starlock 12V / 18V, Dremel Multimax MM40 / MM45 / MM50, Fein FMM350QSL and Black and Decker
• Compatible with Bosch, Chicago, Craftsman, Dewalt, Dremel,Fein, Harbor Freight, Makita, Milwaukee, Porter Cable, Ridgid, Ryobi, Rockwell, WEN and More

User questions & answers

Question:	Will these cut through brick
Answer:	Unfired brick can be scored and then broken with a hammer and chisel (see YouTube). They won't even score fired brick or concrete brick.
Question:	will this blades fit to Bosch MX30E
Answer:	Our diamond multitool blades didn't fit your Bosch MX30E multitools, Thank you!
Question:	I don’t need the round ones at the top picture, can I get only the straight ones
Answer:	We have no this specification as you want, We will consider it in future. We have another size-4 pcs swing blades only. The first one in the picture.
Question:	Do they fit worx wx682l
Answer:	yes, our diamond multitool blades fit WORX tools like WORX WX682L.9.

Product features

4 Pcs Oscillating Tool Diamond Blades

1. Quick Release

2. Universal Fitment

3. Diamond Material

4. Features for Polishing Cement ,Grit ,Grinding and Removing Grout

5. Pack of 4 Pcs Diamond Oscillating Tool Blades Included:

1). 1 Piece 2-3/4 Inch Working Length Diamond Blade

2). 1 Piece 1-3/8 Inch Standard Diamond Blade

3) 1 Piece 2-1/2 Inch Semi Circle Diamond Blade

4) 1 Piece 2-1/4 Inch Swing Diamond Blade

2-1/2 Inch Semicircle

1. Size: 2.5 L by 2.0 W by 0.4 H Inch

2. Semicircle Shape with Flat Side Allow for Easy Access into Corners

2-1/4 Inch Swing Blade

1. Size: 3.0 L by 2.25 W Inch

2. Mainly Used for Grout Removal ,The Swing Design Allow for Easy Access into Tight Spaces

1-3/8 Inch Diamond Blade

1. Size: 3.5 L by 1.35 W Inch

2. Standard Multitool Diamond Blade

2-3/4 Inch Diamond Blade

1. Size : 4.15 L by 1.25 W Inch

2. Working Length: 2-3/4 Inch

Product description

Dremel MM500 1/8-Inch Multi-Max Carbide Grout Blade

Designed to enhance and expand the performance of your Dremel Multi-Max oscillating tool, the Dremel MM500 Multi-Max 1/8-Inch Carbide Grout Blade gives you the versatility you need to complete a range of grout removal projects. Lightweight, compact, and easy to attach to the Multi-Max, this accessory is ideal for home renovation enthusiasts and do-it-yourselfers who want to remove grout that is 1/8-inch and wider.

(Note: The Dremel MM500 1/8-Inch Carbide Grout Blade is compatible with--but sold separately from--the Dremel Multi-Max tool .)

• Lightweight and compact, easy to use for long periods of time in tight spaces
• Operates at very high speeds for quick results and smooth finishes
• Perfect for work demanding precision and control
• Dremel has the tools, attachments and accessories that help you make your detailed project a success
• Measures 1/8-inch
• Lightweight and compact, easy to use for long periods of time in tight spaces
• "Speed advantage" - operating at very high speeds for quick results and smooth finishes

User questions & answers

Question:	Will this work on any oscillating tool
Answer:	No it doesn’t. For this accesory to work on any oscillating tool you would have to buy the “Universal Adapter” by Dremel which allows you to mount these attachments to third party brands such as Bosch, Rockwell, Rigid, Fein and Craftsman . Good luck
Question:	Will this cut tile
Answer:	You could use this to score tile and trim corners but I would not try to use this to cut tiles and half etc.But would be more appropriately done with a tile saw
Question:	Will this blade work on the Dremel
Answer:	No because the Dremel 4200 uses a shank to attach the different tools to the motor. The MM500 is used with the Dremel Multi Max which is an oscillating tool. I have both of these Dremel tools.
Question:	Will this fit the "universal" fit system
Answer:	Yes universal means all

Product description

In order to crystallize caulk bead and achieve an aesthetical caulking surface, this is one of the best-combined packages of caulking tools in today’s market. It can be used as a multi-purpose tool. With that being said, you can call it a silicone sealant finisher, grout tool as well as an adhesive scrapper.

➤➤ Introduction of the Caulking Tool

✔Silicone Finishing Tool

1.This Caulking Tool helps you work easily and quickly to improve the agglutinating quality and the aesthetic sense of surface.

2.Different scrapers edges can be applied at any edge, corner, joint. Suitable for making perfect corners without wasted caulk, silicone or grout.

✔Sealant Removal Tool

The Caulking Tools are easy to use and quick use, you can sealing caulk by yourself, no need for masking tape, to save time.

✔Caulking Tool

The caulking tools can use for door, window, kitchen, bathroom, tank, window, sink joint and so on. Easy to improve the agglutinating quality and the aesthetic sense of the surface.

➤➤ Advantage of the Caulking Tool Kit

1.Waste saving and easy to maintain

2.Super flexible and reusable

3.Zero lacerations risk

4.Multi-purpose application

5.Easy to handle

➤➤How to Use?

Step 1: Choose the proper size and shape of tool

Step 2: Use its smooth rear side to remove the excess sealant from the joint easily

Step 3: Use its fitting concave side for deeper removal

Step 4: Use soapy water or wet cloth to clean the tools after use

➤➤Package contains:

1 x Caulk remover

1 x two-mode scraper

3 x Multi-functional finishing tools

5 x Switchable silicone pads (Radius options – 3R, 6R, 10R, 13R, 17R)

• 【Caulking Tool Kit】This set of tools is upgraded stainless steel scraper can help you repair the gap and clean the residual glue. upgraded stainless steel scraper removes stubborn old glue easily.
• 【 3 In 1 Caulking Finishing Tool】This caulking tools can help you repair the gap and clean the residual glue, which is convenient and beautiful to improve the agglutinating quality and the aesthetic sense of the Surface. Perfect for corners and seamless joint. Finish to most silicone jobs, any edge, corner, joint.
• 【Replaceable 5 Silicone Pads】The Caulking Tools was designed with Non-slip push-pull button, replace the 5 silicone pads which you want( including 3R,6R,10R,13R,17R radius). And sealant finishing tool was made of durable plastic, easy to clean without wasting caulk. They can be reusable with a long lifetime.
• 【Save Costs】The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, no need for masking tape, convenient and quick to use, saves money and time.
• 【Wide Application】For your kitchen, bathroom, tank, window, sink joint and so on, our caulking tools is a must have for doing any type of caulk work and this caulk tool makes all your caulk joints look flawless.

User questions & answers

Question:	Is the caulking tools kit easy to clean
Answer:	Yes.The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, no need for masking tape, convenient and quick to use, saves money and time.
Question:	Where can the caulking tools be used
Answer:	The tools can be used in homes, kitchens, bathrooms, sinks, windows, sink joints, etc.
Question:	Is it difficult for a novice to operate the caulking tool for the first time
Answer:	It's very simple, everyone can operate it.The glue produced is uniform and the seams are smooth.
Question:	Can the caulking tools remove the silicone on a bathroom and to reseal
Answer:	Yes, exact. These tools can help to reseal it.

Product description

The DEWALT DWA4219 Oscillating Carbide Grout Removal Blade is designed with UNIVERSAL FITMENT for use on all major brands of oscillating tools (no adapter required). This blade has carbide edging for easy grout removal.

• UNIVERSAL FITMENT for use on all major brands
• No adapter required
• Carbide edging for grout removal

User questions & answers

Question:	The product description said it's 0.8", and I assume that's the thickness of the blade. Since 1/16" = 0625" it's too thick for a 1/16" line, correct
Answer:	I measured my blade with a digital caliper at 5/64", so it is 1/64th wider than 1/16". I used it on a 1/16th grout line fine. While it scrapes tile on each side, the scrape is completely covered by new grout. For my project, it worked fine.
Question:	What is the clutting width of this blade
Answer:	Measured with electronic caliper, it is exactly 5/64” thick.
Question:	How thick is the blade? Work on 1/16" grout lines
Answer:	1/16" Dewalt also makes a similar very fine grinding blade that is 3/32"
Question:	will this fit makita multitool
Answer:	DEWALT Oscillating Grout Removal Blades are compatible with all major oscillating tool brands.

Product description

The Hyde 3-Speed Electric Grout Removal Tool removes grout at up to 1 inch per second and takes out sanded or non-sanded grout up to 1/8 inch. Features 3 speeds for added control and will not damage tile.

From the Manufacturer

The Hyde 3-Speed Electric Grout Removal Tool removes grout at up to 1 inch per second and takes out sanded or non-sanded grout up to 1/8 inch. Features 3 speeds for added control and will not damage tile.

• For use between shower tiles, on sink or bathtub surrounds, kitchen counters and vanities
• Speed can be adjusted for precision work on decorative inset tiles, liners, V-caps, quarter round, 90-dgree corners and more
• Creates little or no dust
• Includes 2 carbide bits (pointed and chisel), hex key and bit storage that attaches to the cord
• Speed rating 7100 rpm, voltage rating is 120V

User questions & answers

Question:	Where do you buy replacement bits???? Can't find them
Answer:	I have a local hardware store where I can buy the bits. I also ordered extra bits via Amazon when I ordered the tool.
Question:	Will it work on larger gap 1/4 inch
Answer:	As long as the depth isn't any deeper than 1/8". Thank you.
Question:	How long does the bit last. I have a 15'x15' room to do. Lots of grout
Answer:	It did not work as described at all. Went to a multi tool with the grinder bit looking attachment and did the job great. PS I was doing 1/8th inch grout lines in a shower so your experience may vary. However... the multi tool is perfect for grout removal and has a ton of other uses too.
Question:	Why doesn't the seller tell what is in the box? Will this unit do 1/16in grout line? What tips are included
Answer:	We sell the Vitrix Brand of this Degrouter that is Orange and Blue. It includes a flat bit and pointed bit. Removes grout at up to 1 inch per second and takes out sanded or non-sanded grout up to 1/8 inch.http://www.amazon.com/dp/B015JAMXDW

Product description

Specification



Material: plastic

Size: shown as picture, sealant finishing tools size marked on each edge

Quantity: 10 pieces in total



Feature:flexible, reusable, practical and cost-saving

Application: door, window, kitchen, bathroom, tank, sink joint filling finishing



Features:



1. Different scrapers edges can be applied at any edge, corner, and joint.

2. Help you save money: the caulking tools can be applied repeatedly, very easy to clean, a damp cloth is enough.

3. The Caulking Tool Kit is so small for convenient to store and carry.

4. The sealant finishing tool has different sizes marked on each edge, very practical and easy to use.

5. The 3 in 1 Caulking Tools comes with 5 Silicone Pads. 5 different radius including 3R, 6R, 10R, 13R, 17R create variable round shapes.

6. 3 IN 1 Caulk Tool which is enough for removing old caulk and replacing a new caulk.

Package contents:



3 x Blue silicone sealant finishing tools

1 x Black caulk remover

1 x 3-in-1 Sealant Silicone Removal & Scraper Tool Kit

5 x Replaceable Pads for 3 in 1 Caulking Tools

• ❤️【3 In 1 Caulking Tools+4 Pieces Sealant Finishing Tool 】This set of upgraded tools can help you repair the gap and clean the residual glue, Improve the Agglutinating Quality and the Aesthetic Sense of Surface
• ❤️【Two Mode Scrapers】Stainless Steel scraper remove stubborn old glue, Silicone Trowel to remove surface bumps and dents, It's an good tool for smoothing sealing lines, caulking lines; Finish to most silicone jobs, any edge, corner, joint
• ❤️【Save cost】The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, no need for masking tape, convenient and quick to use, saves money and time
• ❤️【Replaceable 5 Silicone Pads】The Caulking Tools was designed with Non-slip push-pull button, replace the 5 silicone pads which you want( including 3R,6R,10R,13R,17R radius)
• ❤️【Wide Application and Good Service】The caulking tools can use for home, kitchen, bathroom, tank, window, sink joint and so on. and we provide good service for our customers, refund fast and replace a new one.

User questions & answers

Question:	Can I remove the silicone on an aquarium and to reseal it
Answer:	Yes, you can remove the silicone using a metal head or a black plastic scraper. Blue caulking tools help you improve agglutination quality and surface feel.
Question:	Does it come with the caulking
Answer:	No, caulking must be purchased separately.
Question:	Does this come with a case
Answer:	These are packed with plastic bag.
Question:	Can it be cleaned and reused, or do you have to throw it away after each job
Answer:	The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, convenient and quick to use, saves money and time.

Product features

3 in 1 Silicone Caulking Tools

• Stainless Steel scraper removes the stubborn old glue.
• The handle is ergonomically designed.
• US Patent : 9376825

Replaceable 5 Silicone Pads

• 5 different radius Silicone Trowel to remove surface bumps and dents,
• Finish to most silicone jobs, any edge, corner, joint

Widely Application

• Door, Window, Kitchen, Bathroom, Tank, Toilet, Sink Joint Filling finishing.
• This tool helps you work easily and quickly to improve the agglutinating quality and the aesthetic sense of the surface.

Sealant Removal Tool

• The caulking tools are easy to use and quick use, you can sealing caulk by yourself, no need for masking tape, to save time.

Different Edges

• Different Edges Different edges are marked with different sizes to meet your different needs.
• Suitable for making perfect corners without wasted caulk, silicone or grout.

Silicone caulking tool

• The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant

A great silicone caulking tool

• A great tool to remove leaky silicone and grout lines.
• Their smooth rear side can easily remove the excess sealant from the joint with little pressure.

• Premium Material: Grout saw are made of high quality plastic and hard metal, “diamond style” blade help you remove grout with minimal effort.
• Angled Design: Tile grout ripper has a angled head for removing grout from the hard to reach places the machine can’t reach, easy to use.
• Ergonomic Handle: This is a handy little tool for cleaning out the old grout. The anti-slip handle is 8 inches long, comfortable to use.
• 3PCS Extra Blades: The blade attaches to the saw with 2 screws, it can be easily replaced and keep you going until the job is done.
• After-sale Service: If you have any questions about our products, please contact us, we will get back to you within 24 hours.

User questions & answers

Question:	What is “diamond style
Answer:	Thank you for your question. It means the coarse head of the blade.
Question:	How wide are these blades? Will it work for very thin bathroom tile grout
Answer:	Thank you for your question. The width of these blades is 2cm, the thickness is 0.07 inch.

Product features

Tile Grout Saw Angled Grout Saw with 3 Pieces Extra Blades Replacement

Features:

• Designed for removing paint, vinyl flooring, silicone etc.
• Has a strong metal blade with a tick rubber grip for better handling.
• Angled head for easier scraping and a more comfortable and smooth use.
• Blade is easily removed and replaced.
• Package includes:
• 1* Tile Grout Saw
• 3* Extra Blades

Product description

Basic Information:



Material: plastic and hard metal



Handle Size: 20 cm / 8 inch



Blade Thickness :2mm/0.08inch



Color: yellow+black



Grout Remover Features:



1、Designed for removing paint, vinyl flooring, silicone etc.



2、Has a strong metal blade with a tick rubber grip for better handling.



3、Angled head for easier scraping and a more comfortable and smooth use.



4、Blade is easily removed and replaced.



Silicone Sealant Tool Features:



1、4 pieces caulking tool set silicone sealant scraper grout finishing tool for kitchen bathroom floor sealant sealing.



2、The caulking tool are good for smoothing sealing lines and caulking lines which fit for most types of sealant, and they are suitable for any edge, corners, joints.



Package Included:



1 x Grout Remover



3 x Replacement Blades



4 x Silicone Sealant Tool

• Sturdy Grout Remover：This grout removal tool is made of high quality plastic and hard metal,Grout remover saw is specifically made to clean out or remove old dirty pitted grout. It can be widely used in kitchen, bathroom, balcony, bedroom etc.
• Special Design: Tile grout ripper has a angled head for removing grout from the hard to reach places the machine can't reach. It is sturdy and durable, providing you with long-lasting use.
• Non slip Grip: The textured handle on Grout Remover delivers a comfortable, strong and non-slip grip for optimum control and better manoeuvrability.
• Save your money: You will get 4 x Silicone Sealant Tool for smoothing sealing lines and caulking lines, 1 x Tile Grout Remover , 3 x Replacement Blades . Grout Remover Tool Set make this otherwise difficult job much easier.
• After-sales Service: If for any reason you are not satisfied with our product, please contact us ,we are happy to answer any questions that you may have.we will solve it for you the first time.

User questions & answers

Question:	What size grout joint will this work for
Answer:	Thank you for your question,the width of these blades is 19mm/0.75 inch ,the thickness is 0.07inch.

Product description

This grout saw is specifically made to clean out or remove old dirty pitted grout so you can put new grout in for a cleaner look.

The specially angled handle, and the specially designed blades make this otherwise difficult job much easier.

Specification:

Material: TP, Alloy sand

Dimensions: 5.31x3.94x0.75in

Total length: 8.27in

Color: Blue&Silver

Quantity: 1 pc Grout Saw and 4 blades(other accessories demo in the picture is not included.)

The thick of the cutting surface is 1/8 of an inch thick(approx).

As precaution, always be sure to wear gloves, safety glasses, and use a dust mask to protect yourself from particles and dust during the removal process.

www.amazon.com/shops/MU-MOON

• This grout removal tool is specifically made to clean out or remove old dirty pitted grout so you can put new grout in for a cleaner look. Specially angled handle, and the specially designed blades make this otherwise difficult job much easier.
• The saw comes with an already installed blade and 3 extra blades. The blade attaches to the saw with 2 screws, and can be easily replaced. Blades have a gritty surface to help you scrup away the old grout thoroughly.
• Measures 8-inches long, easy to grip for scrubbing action, specially angled handle can helps get into the grout area, complete with 4 interchangeable blades to keep going until the work is completed.
• Affordable and portable, with remarkable results.
• Item dimensions: 5.31x3.94x0.75in. Total length: 8.27in. The thick of the cutting surface is 1/8 of an inch (approx).

User questions & answers

Question:	Does this scratch glass tiles
Answer:	Can’t tell you. I used mine on ceramic tiles and you had to be careful to avoid the edges.
Question:	Will this tool work on dried mortar that’s in my grout lines
Answer:	Without a problem ... but if it's sand grout .. you gone need a $30 electric grinder with a diamond cut blade to get it out ........ but mortar it works good for that...but sand grout No water.
Question:	I know it comes w/ 3 blades. Can you buy extra blades
Answer:	Sorry, we can't buy blade separately at present. The blade and handle are sold in sets. When you buy it, you need to see the thickness of the blade. There are two kinds of blade thickness to adapt to different tile gap sizes.
Question:	Would it work on really thin grout lines
Answer:	Mine were about 3/16" and it worked great. It would work maybe on 1/8" but certainly no less

• ✔The Oscillating Multitool Carbide Grit Finger Rasp Blade with Universal Fit System is a great multitool blade attachment for handling coarse sanding and shaping on fillers, tile adhesive, concrete and soft stone. The narrow blade is ideal for detail work in corners and small, tight spaces.
• ✔The Oscillating Multitool Universal Fit Carbide Grit Semicircle Blade allows you to cut into concrete and defective tile joints with its brazed carbide grit.
• ✔ The oscillating Multitool Triangle Carbide Rasp is ideal for cutting trim and other grinding projects. The triangle edge makes it easy to sand in corners or tight areas that other blades can't reach.
• ✔ Our carbide oscillating saw blades are compatible with many oscillating tools including Fein Multimaster, Bosch, Dremel, Ryobi, Hitachi, Chicago, Mastercraft, Milwaukee, Ridgid, Black & Decker, Rockwell, Dewalt, Einhell, Porter Cable, Craftsman and more.
• ✔ There are 3 types and 6pcs carbide oscillating tool blades, which are suitable for cutting and grinding objects like concrete, grout, tile, ceramic and masonry etc.

User questions & answers

Question:	will this set fit my Harbor Freight
Answer:	It fits my Rigid multitool. I'm not sure about the Harbor freight tool, but I would bet it will fit just fine.
Question:	Does it fit Rockwell oscillating multi tool AW
Answer:	Yes, i think it can, you can take a try, if finally you find it doesn't fit, we will refund you all the money. Thank you again for your question!
Question:	I have a early 1980's fein muiltimaster will these work if i get the fein (multimaster) upgrade kit ve
Answer:	These should work with any oscillating multi-tool. They may require an adapter witch should be provided with the tool.
Question:	Has anyone used these on wood or pvc exterior molding
Answer:	Coated tools will work on wood or PVC, but will tend to build up a lot of heat. As in, scorch wood, possibly melt PVC. For these materials, better to use conventional toothed blades.

Product features

HEMUNC 6PCS Carbide Oscillating Saw Blades Kit

HEMUNC 6PCS Carbide Oscillating Multitool Saw Blades Accessories Kit fit for numerous models of oscillating tools in the market, such as:

Chicago Electric 60428 8-Function, Chicago Electric Pro Series, Chicago Electric Multi Tool-63113, Craftsman 2.0 Amp No. 320.23465, Crafsman Nextec Mult Tool, Dewalt Cordless, Dewalt DCS355, Dewalt DWE315, Dremel Velocity 7.0 Amp Corded, Fein Multimaster FMM250Q, Harbor Fright 63113, Jobmax, Makita Cordless 18V, Makita LXMT02, Makita TM3000G, Makita XMT03Z, Milwaukee M12, Milwaukee 18, Milwaukee Fuel Multi Tool 18V; Nextec; Porter Cable Oscillating Tool 20V, Porter Cable PCC510 / PCC710 / PCE 605 / PCE605K / PCE606 / PCE606K;

Ridgid Jobmax Oscillating Tool, Ridgid R2820-series B, Ridgid R2820-series B, Ridgid R286024 AMP Corded, Ridgid R8620-Series, Ryobi Cordless, Ryobi P340 ONE Plus 18V, Rockwell RK5132K 3.5 Amp, Rockwell RK5151k, Rockwell Shop Series SS5122, Rockwells Sonicrafer , Bosch PS50BN, Wen 2312, Worx WX682L.9, Zinsano MT400

IMPORTANT NOTE

NOT Fit for following models:

- Black and Decker Matrix

- Bosch MX30E/ MXH180B/ MX30EC-31, Bosch GOP40-30, Bosch GOP12V-28N, Bosch Starlock

- Dremel 6300, Dremel MM40 , Dremel MM45, Dremel MM50.

- Fein Multimaster FMM350QSL, Fein Supercut, FeinStarlock

- Craftsman Bolt-On mode

3-1/8" Oscillating Multitool Triangle Carbide Rasp

The triangle edge of our carbide multitool blade is ideal for sanding and shaping corners and tight spots where other blades can't reach.

2-1/2" Oscillating Multitool Carbide Grit Semicircle Blade

The half-moon carbide multitool blades can be used to cut tile grout, mortar, concrete, hardened adhesives.The design of flat side allows this cutter to completely work all the way into the corners without damaging opposing walls or surfaces.

2" Oscillating Multitool Carbide Grit Finger Rasp Blade

The Oscillating Multitool Carbide Grit Finger Rasp Blade is great for handling coarse sanding and shaping on fillers, tile adhesive, concrete and soft stone. The narrow blade is ideal for detail work in corners and small, tight spaces.