13 best se bench vices

Product description

The SE 3" Universal Aluminum Table Vise 360 Degrees Rotating is designed to be lightweight yet durable enough to tackle the toughest of projects. The width of the vise jaws are 3" and they span open for a length of 2". These jaws are padded with rubber soles to comfortably secure your item in the vise. The overall dimensions are 11" by 6" by 3". A vise is a mechanical apparatus used to secure an object so that work can be performed on it. Vises have two parallel jaws (one fixed and the other movable) threaded in and out by a screw and lever. This tool was crafted with high quality materials to ensure that SE’s table vise will be the only one you need for all your metalworking, woodworking, and many other material-handling needs. *Note: This product is not for heavy-duty use. Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE products are quality items for extremely reasonable prices. SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this SE 3" Universal Aluminum Table Vise 360 Degrees Rotating has to offer. SE is a registered trademark protected by US Trademark Law.

• Rubber bumpers, aluminum body
• Head rotates 360° and tilts 45°
• Clamps onto surfaces up to 2" thick
• Secures an object to allow work to be performed on it
• Great for artists, hobbyists, and jewelers

User questions & answers

Question:	Can I conduct Ar 15 and Ar10 upper builds with this thing
Answer:	It is a real struggle because the vice doesn't open wide enough to fit an upper vice block in it securely I would recommend a 4-5 inch vice at minimum.
Question:	What is the maximum table width this vise can attach to
Answer:	Hi Michael, The maximum table width opening: 2" . It can clamps onto surfaces up to 2" thick. Jaw width: 3" . It works great for me.
Question:	could i change out gunsights with this vice
Answer:	Quite possibly, it only has about a 2 1/2 inch mouth at the maximum open. It also has rubber grips that will not cause damage to your barrel or stock. I have used mine to press stuff back into position a few times.
Question:	Someone is saying that its heavily plastic. Is this true? It looks metal in the pictures
Answer:	No,.. it is cast aluminum alloy. A perfect 3rd hand for holding electronics boards, plastic, wood metal, circuit boards, jewellery. You know a small hobby vice. Forget what these guys are saying about the cast cracking, Look it's cast aluminum, ment for small lite duty pressing or holding, they obviously are using it for purposes NOT intended, or have dropped it from 20 or 30 ft onto concrete or hit it with a 10 lb hammer. If the vice cracked within the warranty period, or it was shipped defective, send it back for a new one, chances are the crack defect occurred in shipment from warehouse in usa by the carrier delivering to your home, that is where most of the gorilla tactics occur, especially the BROWN trucks, but that is a whole other can of worms. Unless you abuse this vice I seriously doubt you will crack the aluminum casting, if you do then in my opinion it's your fault, and you need to purchase a larger 5"-10" vice from shoppers supply so you can hold your 2x4's or 2 inch schedule 80 pipe while using a sawzall to whack it in half. This is a good solid little vice I use it all the time and have absolutely no regrets. I use it in holding electronic pcb boards when I solder, and I can tell you that the pivot ball allows you to get the placement of my PCB boards at just the right angle for delicate soldering. I also use it to hold small objects while using my dremel tool for drilling, sanding, buffing, nibbling away at plastics, aluminum and lite steel enclosure project boxes to house electronic DIY projects. Sorry for the rant, being 60 years old is my excuse I guess.

Product features

Universal Table Vise

SE is very proud to bring you this 3" Universal Table Vise is designed to be lightweight yet durable enough to tackle the toughest of projects. The overall dimensions are 11" by 6" by 3". The width of the vise jaws are 3" and they span open for a length of 2". These jaws are padded with rubber soles to comfortably secure your item in the vise.

Vise Jaw

The vise jaw features a wide mouth jaw that can hold an assortment of items under 2" wide. By controlling the pressure of the jaw lock and using the rubber bumpers.

Orbital Joint

This table vise features a orbital joint allowing you to rotate the vise jaw to your desired position.

Table Clamp

Versatile design, drop the jaw into a vertical slot when needed. Turning any table into a stable sturdy base.

Product description

The SE 6" Wooden Ring Clamp is 6" long without the wedge and has leather padding on both jaws. The jaws are about 1" wide. It is very well-made and one end has a rounded jaw and the other end is square. The wedge is used to apply pressure to the gripping end of the clamp. This product is also handy for other items except rings.

SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness of our SE 6" Wooden Ring Clamp.

IPR Rights Notice:

Important: Avoid getting counterfeit items. Genuine SE products come with the SE logo on the packaging.

SE is a registered trademark protected by US Trademark Law.

• 6" long
• Wooden ring clamp
• Leather padding on both jaws
• One end has rounded jaw and other end has square jaw
• Wedge is used for applying pressure to gripping end of clamp

User questions & answers

Question:	What is a bezel “roller”, and how is it used
Answer:	Hello, These are manufactured in China. Thank you for your inquiry!
Question:	Can i use wooden ring clamp to hold 46g wire while i'm wrapping around 26g on drill
Answer:	Hi Blain! SKIL power tools are designed to be as user-friendly as possible, so the batteries are readily available. To check it out, just visit us at skil.com or give our team a call at 1-877-SKIL-999 (1-877-754-5999). We're here to help!
Question:	Is that "besides rings" rather than "except rings
Answer:	Hi Natasha Smith, we are sorry to hear that. Please contact the SKIL team for assistance: 1-877-754-5999. Thank you for your question.

Product features

More Than Just A Clamp

Our 6" Wooden Ring Clamp is more than just your average clamp. It works for a multitude of projects. Jewelers can use it to help hold rings, earrings, and other jewelry pieces while crafting. Our clamp can also be used for holding coils, gemstones, metal wires, and any other small object. Our clamp is a simple but essential tool that is perfect for both hobbyists and professionals.

Features

• Overal Length: 6"
• Leather Padded Clamps
• Dual Jaw Shapes
  • Round
  • Square
• Wedge For Applying Pressure To Gripping End Of Clamp

Rings & Gemstones

Our 6" Wooden Ring Clamp easily holds rings and gemstones to assist you while grinding, sanding, or polishing. The leather padded clamps keep pieces from becoming marred.

Coils & Wires

Our 6" Wooden Ring Clamp is great for more than just rings. It can also hold coils and wires to give you use of both hands while crafting. The wedge helps apply pressure to the gripping end of the clamp.

Any Small Object

Even if you aren't working with jewelry related items, our 6" Wooden Ring Clamp can help! It easily holds any small object so you can use it for virtually any project. Our clamp includes both rounded and square ends to fit any need.

Product description

The IRWIN Drill Press Vise features a slotted base for easy installation and positioning. Crafted of forged iron for durability with textured 4" jaws that grip securely, this lightweight and portable drill press has a 4-1/2" jaw capacity and is perfect for light duty tasks.

From the Manufacturer

The IRWIN 226340 4-Inch Drill Press Vise provides stability and pressure for drilling applications. This vise is made of forged iron and has a clamping pressure of 1000-Pound.

• Slotted base for easy installation and positioning
• Textured jaws for secure gripping
• 4.5 Inch jaw capacity perfect for light duty tasks
• Lightweight and portable
• Crated of forged iron for long-lasting durability

User questions & answers

Question:	the slots on my drill press are 4.5 inches center to center. will this fit my drill press
Answer:	The slots on this vise is 6" center to center. You can angle the vise to line up with the holes on your drill press.
Question:	Is this tool made in USA, or china/mexico/other?? Thank you
Answer:	Seems to be China
Question:	What hardware is required to attach to the drill press
Answer:	4 bolts , nuts and lock washers. Don't remember the size but you want them to be snug in the holes that mount the vise to the base plate of the drill press.
Question:	Will this vise bolt to a Rockwell Rk7033 drill press
Answer:	I have a Delta bench top drill press, and I can bolt it down. Unfortunately I don't know much about the Rockwell drill press.

Product description

SE is proud to present our 3-Speed Mini Bench Drill. You can drill precise holes with this product. It is easier to use and more accurate than handheld drills. This item is useful for craftsmen, hobbyists, jewelers, mechanics, and woodworkers for home and workshops.

Features of our 3-Speed Mini Bench Drill include:

Working area dimensions: 6-9/16” x 6-9/16”

Base dimensions: 6-5/8” x 6-5/8”

Max drill height: 7-1/2”

Max drill capacity: 6 mm

Spindle travel: 1”

Voltage: 110V/60Hz

Wattage: 100W

3 Variable speeds: 0 to 5,000 per min. | 0 to 6,500 per min. | 0 to 8,500 per min.

3 wrenches

(10) 6 mm chuck key

Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE products are quality items for extremely reasonable prices.

SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this SE 3-Speed Mini Bench Drill has to offer.

SE is a registered trademark protected by US Trademark Law.

• Work area dimensions: 6-9/16” x 6-9/16”
• Base dimensions: 6-5/8” x 6-5/8”
• Max drill height: 7-1/2”; Max drill capacity: 6 mm
• 3 Variable speeds per minute: 5000, 6500, 8000
• Comes with 3 wrenches and 6 mm chuck key

User questions & answers

Question:	Where is the power switch
Answer:	This depends on whether the spindle of the drill press has a MORSE MT2 bore at its bottom end, where the chuck mounts. To find out, you must remove the current , old chuck from the spindle of your drill press and inspect the mounting bore on its bottom end. If it is a tapered bore, the tapered adaptor shaft shown on the picture with the new chuck will fit into it.
Question:	Which is the vertical drill travel
Answer:	All you have to do is buy the correct adapter , problem solved. Check your machine is it R8 or Moorish taper
Question:	I'm a beginning pipemaker. Would this press work for drilling out 7/8" wide bowls that go an inch into briar wood
Answer:	yes
Question:	What is the warranty on this product
Answer:	mt2 is 2 1/2 inch long other end for chuck is 1 1/8 inch long

Product features

3-Speed Mini Drill Press Bench

The 3-Speed Mini Drill Press Bench, is great for small projects. With a max drill capacity of 6mm, you can drill precise holes making it more accurate than hand-held drills. This is a must have tool for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Product description

The Yost LV-4 is a 4-1/2-Inch swivel base vise is ideal for home shop. The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle assembly and a chrome lockdown. The vise can be rotated up to 240-Degree on its base for work positioning. The built in pipe jaws allow holding small pipes and tubes ranging in diameter from 0. 6"D to 1. 85"D. The vise is painted with a durable blue powder coat.

• Home Work Shop Vise, woodworking, assembly, general maintenance.
• Jaw width: 4-1/2" (11.4CM) x Jaw opening: 3" (7.6CM) x Throat depth: 2.4" (6.1CM)
• Holds 0. 6" D to 1. 85" D pipes and tubes (1. 5CM x 4. 7CM)
• 30, 000 PSI cast iron construction, blue power coat finish
• Anvil: 1. 75” x 2” (4. 4CM x 5. 1CM)
• Screw Diameter: 0. 6” (1. 5CM), Handle Diameter: 0. 4” (1CM) x Handle Length 6” (15. 2CM)
• 240-Degree Swivel base allows rotating the vise for versatility

User questions & answers

Question:	does this come with any type of warranty
Answer:	Yost vises website says it comes with a 1 year warranty. My vice split in half length-wise 4 inches long, toward the jaws, the first time I used the anvil platform. Unfortunately, it was 2 years after purchase. Their higher end professional series vises carry a lifetime warranty.
Question:	Bolt pattern mounting size
Answer:	Go to Yost site and look under support there is a pattern. 4 3/8th inches as I recall but double check
Question:	Is this vise manufactured in the USA
Answer:	USA vises start at $250
Question:	What size bolts are needed to mount the vise
Answer:	I used M10 SHCS with hex nuts and washers via through hole in my workbench. The spot face on the vise mounting surface is just large enough for 3/8" or M10 standard flat washers.

Product features

Yost LV-4 Home Vise

The Yost LV-4 is a 4-1/2-Inch swivel base vise is ideal for home shop. The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle assembly and a lockdown. The vise can be rotated up to 240-Degree on its base for work positioning. The built in pipe jaws allow holding small pipes and tubes ranging in diameter from 0.6"D to 1.85"D. The vise is painted with a durable blue powder coat.

Pipe and Machinist Jaws

Cast in place pipe jaws can grip round stock ranging from .6" to 1.85" in diameter. The machined serrated jaws are 4.5" in width.

Improved Base Design

The base features four mounting holes for mounting the vise to the workbench. The bolts are sold separately, but Yost recommends using 3/8" bolts to mount the vise to the table. The improved base reduces side to side movement of the vise.

Acme Threaded Main Screw

The zinc plated main screw uses an acme thread. The locking C collar provides quick engagement and disengagement of the main screw.

Product description

Features：

• This mini vise is designed for CNC router milling worktable.
• It can hold object in length 13cm max. and provide a thick pad for thin material.
• Easy and convenient to adjust by screws.
• Using this vise won’t take up any engrave space on the material as the commonly clamps.

 

Specifications:

• Holding Length: 13cm/5”
• Product Size: 20x8x4 cm/ 7.87”x3.15”x1.57” (L*W*H)
• Material: Aluminum

 

Package List:

• 1x Mini Vise
• 1x Hex Wrench
• Pack of screws

• Use as a holding clamp for CNC router machine milling worktable. Compatible with 3018-SE, 3018 Pro CNC routers etc.
• Hold the engraving object without taking any engraving area.
• Product size: 20x8x4 cm/ 7.87”x3.15”x1.57”; Max. holding length: 13cm/ 5”
• The vise is made of high-quality aluminum, which is durable and strong enough to stay steady while machine is running.
• It holds the object tightly and easy to adjust with screws.

User questions & answers

Question:	Will this clamp tight enough to mill a piece of aluminum
Answer:	DCK240C2 Includes (2) 20V MAX* Lithium Ion 1.3 Ah Battery Packs.
Question:	Will this hold a 4 in x 6 in x 2in thick piece of aluminum in place for milling with a 6mm flat end mill
Answer:	Yes, the charger is included.
Question:	What grade of aluminum is this made of
Answer:	DCK240C2 includes (2) 20V MAX* Lithium Ion 1.3 Ah Battery Packs.

Product description

We see a future built on great brands, great products and great people. In every facet of our business we leverage the strengths of our global infrastructure to maximize the benefits of all three.

From the Manufacturer

This durable shop vise has a 25,000 pound casting. The four lug base design and double lock downs make this vise very stable under pressure. Easy gliding U channel. Competitively priced.

• DURABILITY: Have castings with a 30,000 PSI gray cast iron body built for rugged use and extended life.
• SECURE HOLD: Capable of mounting to the bench with 4 mounting posts providing more stability and secure hold
• 360 DEGREE SWIVEL: Base can swivel 360 degrees with double lockdown for quick and easy positioning
• LIFETIME WARRANTY: Product is built to last. Wilton warrants every product they sell against manufacturers’ defects.
• PERFORMANCE: Has built-in pipe jaws handle various pipe sizes and rubber pinch safety guards

User questions & answers

Question:	Is this a real wilton made vise or is a imported junk from china made for them
Answer:	The model number 63302 is manufactured in China.
Question:	What is the country of manufacutre
Answer:	I am not sure...the lower end units look to made in China. We own several of these. They work fine.
Question:	Where is this vice made
Answer:	The Wilton Shop Vise is made in China.
Question:	What kind of warrenty
Answer:	do not know about warrenty

Product description

These have to be the slickest and cheapest way to bend sheet metal. The dies mount into your vise and are held magnetically. Slide your sheet metal in and bend by tightening the vise! The press fingers are sectional and can be removed allowing small boxes to be made. Great crafter's tool! Size: 5".

• For bending sheet metal
• Package dimensions: 3.7" x 5.5" x 2.2"
• Approximate weight: 2.5 lbs

Product description

Remember when your bench grinder stayed put? As all woodworkers know, a grinder on a normal work surface often times jostles and skews the other items in a work area due to heavy vibrations created by the grinder. The WEN Bench Grinder Pedestal Stand resolves this issue by providing an independent surface for you to attach your tool. The heavy cast iron and steel design limits vibration while providing a sturdy 31.5 inch pedestal for your grinder to rest on. The stand includes a water pot for quenching workpieces and a reliable three-legged design with bolt holes for fastening your stand to the floor. The 9.9- by 12.4-inch cast-iron top is provided with slots and holes for securely mounting your bench grinder to the stand. And even though this stand was built with the WEN Bench Grinders in mind, its universal design accommodates the majority of bench grinders on the market. And because it is a WEN product, your bench grinder stand comes backed by a one year warranty, a stocked inventory of replacement parts, and a friendly and helpful phone line. Remember when your bench grinder stayed put? Remember WEN.

• Heavy-duty cast iron and steel construction prevents walking and wobbling during operation
• 9.9-inch by 12.4-inch steel mounting plate accommodates a variety of bolt orientations
• Measures in at 31.5 inch height with an onboard water pot to cool down projects
• Compatible with the entire line of WEN Bench Grinders
• Universal design fits the majority of bench grinders on the market

User questions & answers

Question:	What are the pipe specs, id and od
Answer:	Center Post is 2 and 1/2 in outer diameter. It's about 30 inches tall. I don't want to disassemble it to get the inner diameter but it's not a very thick walled pipe
Question:	Can anyone tell the the outside diameter of the tube
Answer:	The outer diameter of the support tube is 2 1/4".
Question:	Anyone get the Wen 4276 grinder to go with this? How's that working out
Answer:	I did and it is plenty of power to tare through metal and for knife/EDC Multi Tool making. I was very pleasantly surprised and extremely pleased with the Value I got out of the WEN 4276. for ~$45 can't get any better.
Question:	How sturdy is it? I am not able to bolt it to my floor
Answer:	If you're not able to bolt it to the floor, try this... Take a pair of 3' or 4' x3/4" pressure treated plywood squares. Glue them together with a good adhesive and drive a bunch of deck screws in to make sure they are solid. Then trace cut the plywood into a 3' diameter circle and bolt the stand in the center. Now you can lean the grinder stand on edge and roll it to a new location. You could add leveling or rubber feet also.

Product features

Take your Tools to the Next Level

As all woodworkers know, a bench grinder on a normal work surface often times jostles and skews the other items in a work area due to heavy vibrations created by the grinder. The WEN Bench Grinder Pedestal Stand resolves this issue by providing an independent surface for you to attach your tool. The heavy cast iron and steel design limits vibration while providing a sturdy 31.5 inch pedestal for your grinder to rest on. The stand includes a water pot for quenching workpieces and a reliable three-legged design with bolt holes for fastening your stand to the floor. The 9.9-by-12.4-inch cast-iron top is provided with slots and holes for securely mounting your bench grinder to the stand.

Compatibility

The steel mounting plate accommodates a variety of bolt orientations and is compatible with the entire line of WEN bench grinders.

Convenience

The 31.5-inch stand includes a water pot for quenching workpieces and the hook on the back of the mounting plate can be used to keep cords out of the way.

Stability

Made of heavy-duty cast iron and steel, the solid three-legged base prevents wobbling during operation. For maximum stability, fasten the base to the floor through the bolt holes.

Product description

Hold pipe and tubing securely in place with the RIDGID 40195 Top Screw Bench Chain Vise. The bench vise has the crank handle conveniently anchored to the base. A handy side pipe rest and bender help steady the pipe while providing leverage. Built for longevity, the pipe vise has a rugged cast-iron base for excellent durability.

The BC410 bench vise has a 1/8-inch to 4-inch pipe capacity. Model BC410P is available for use with plastic pipe and tube.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 40195 is a top screw bench chain vise. This vise has a crank handle that is attached to the base and a rugged cast-iron base that has a handy pipe rest and bender. Its pipe capacity is 1/8-Inch to 4-Inch

• Crank handle is anchored to the base of the bench vise
• Rugged, cast-iron base features a handy pipe rest and bender
• Pipe vise weighs 14-3/4 pounds (3.5 kg)
• Bench vise has a 1/8-inch to 4-inch (6 mm to 100 mm) pipe capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Question:	Has anyone mounted this on a flat steel plate
Answer:	4 3/4"
Question:	How far apart are two main bolts from each other
Answer:	The chain is 20’ inches long I run this particular ridged vise on 4 of my Plumbing trucks great product !
Question:	How long is the chain
Answer:	Yes you can buy Ridgid 41055 is the replacement lo chain. America Tools
Question:	Where can one get replacement chain
Answer:	YES! with a filletzall blade, this is the most awesome electric fillet knife EVER!

Product description

The Hopkins 90164 2x4basics Workbench and Shelving Storage System offers an easy fix to custom shelving. All the hardware is included, just add the size lumber you want (lumber not included). Simple assembly with only a powered screwdriver and a saw, no miter or angle cuts necessary. Ideal for the garage and shed, the Shelf Links are durable and sturdy giving you the ability to easily organize your items onto storage shelving.

Create a work and storage space that truly fits your needs with the 2x4basics Workbench Assembly Kit. This innovative, do-it-yourself system lets you easily assemble a custom workbench in less than an hour. All you need is some plywood and 2x4s and you'll have a work bench that will meet all your project and storage requirements.

Use the included bonus ShelfLinks Kit to add shelving to the top or sides of your workbench. View larger.

2x4basics Workbench Assembly Kit At a Glance Helps you build a customized workbench with a height of 36 inches Assembles in less than one hour Each shelf holds up to 1,000 pounds (400 kilograms) Requires only straight, 90-degree cuts Lifetime warranty

Completely Customizable, Easy-to-Assemble Workbench System

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 by 4 feet--by just adding lumber (not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters).

Advanced Engineering Meets Strong, Durable Construction

Sturdy 2x4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. In fact, each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

Versatile Design for Potting Benches, Custom Shelving, and Storage Options

With the Workbench Assembly Kit, you are no longer limited to a standard-sized potting bench--you can make a unit as small as 2 feet by 2 feet to use as a plant stand.

In addition, you can use the included bonus 2x4basics ShelfLinks Kit to add shelving to the top or sides of your custom workbench (additional ShelfLinks kits sold separately). You can build custom workbench and storage solutions for your dorm room, garage, basement, shed, or home. Custom shelving will also add valuable storage space that fits your project requirements.

What's in the Box

Four workbench legs, six ShelfLinks, assembly instructions, hardware, and warranty information.

Customize a work bench for any jobsite. View larger.

Each shelf holds up to 1,000 pounds. View larger.

Solvent resistant for long-term durability. View larger.

Expand your shelving and storage with six included ShelfLinks. View larger.

From the Manufacturer

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 feet by 4 feet--by just adding lumber (lumber not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters). Sturdy 2 by 4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. Each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

• Lumber not included with each kit (Shelves not included)
• Includes 4 workbench legs, 6 shelf links
• Brackets made of heavy gauge structural resin. Workbench Legs to make a workbench in any length or width up to 8 feet by 4 feet (2.4m x 1.2m)
• Customizable workbench and shelving
• Only straight 90 degree cuts, no miter or angle cuts necessary

User questions & answers

Question:	I see in the instructions that they state to put a piece diagonally to support the work top. Was there a place in the leg to attach this piece
Answer:	Yes, the upper leg support accommodates the (3) pieces of wood . The left & right sides of the wood are screwed into the leg support and the diagonally placed 2 x 4 is just laid diagonally across (sits on the upper leg bracket).
Question:	Is there anyway to attach caster wheels to make this easier to move
Answer:	YES! In fact it is quite easy to do , "Adding Castors/Wheels", to this workbench. As sturdy as this bench is once built it is easy to flip on it's side or back. And in that position simply attach your wheels. Just make sure you purchase GOOD wheels! And with a good mounting system. I at first tried to save a buck and bought some really cheap wheels from Amazon. Thought the wheels were rated at 500Lbs. That must have been a one time use rating! I then found a deal on Amazon for "Locking, Two inch dia., Polypropylene wheels with metal frames", Rated for 1000 Lbs. and they worked great. "STAY away from any plastic wheels regardless of the ratings!" The catch is the mounting system for the wheels. Most either have four holes you can place screws into OR a single steel 'Round", post with a metal "O-ring" to lock it in place. The latter you can order a larger plate that will attach to the bottom of the bench that the post slides up into. These worked for me. The one's with the four screws? Even with longer screws than recommended, -"4 x #8, 3-1/2" inch long, metal deck screws" they failed repeatedly. The bench weighs allot by itself and the four screws literally tore though the bottom of the bench! The wheels with a 3/8" inch metal center post worked with the mounting plates I made from heavy steel angle, "L-Brackets from the hardware store", with the 3/8" inch hole that I drilled in them for the post. With four 1" screws into the bottom but also two into the side. So that they were held both vertically and horizontally. Good luck!
Question:	Are the shelf supports included with this kit the same size as the 90124 Shelf Link units ( which accept 4- 2x4 in width) sold separately? From the pictures it looks like the ones with this bench kit are using 3 - 2x4, or one narrower
Answer:	I ordered the bench kit (90164) and the shelf link kit (90124). I did not use the shelf kit supplied with the bench kit on the bench itself. I combined them with the shelf link kit to make more shelves. They are exactly the same parts. I hope this helps.
Question:	Can someone give me a general estimated idea of the cost to assemble this assuming a table top size of around 5'x2' or
Answer:	I used sanded 3/4” sheets of plywood with a double layer on top plus all the 2x4’s and upgraded hardware. I spent an additional $450 to build mine.

Product features

Customizable Diy Storage, Organization And Outdoor Furniture

Our 2x4 Basics brackets have been designed to make garage organization and outdoor furniture projects as simple as possible. Only 90° cuts are required, no miters or angles, and projects can be built to any length up to eight feet. To simplify the process even more, only 2x4 lumber is needed for most projects.

Garage Organization

Outdoor Furniture

Outdoor Storage

• Jaw width:125mm(5"), Opening: 125mm(5"), Throat Depth: 67mm(2.6"), Clamp force: at least 5500lbs
• More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000
• Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise
• Great for clamping and fixing workpiece: Higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space
• Perfect Dual-Purpose Vises: This 5" vise is suitable for both industrial and DIY home use. The front jaw can be rotated by 360 degree, more convenient for clamping works

User questions & answers

Question:	Is the vise made in America
Answer:	Lmao No way can you buy a American made vise for this price. If you want super quality Wilton is a great brand. Im not a professional so this vise is good for what I need in my shed. Hope this helped
Question:	Is the jaw rotation indexed? Or does it only rely on the locking screw to keep it from rotating
Answer:	No indexed but the locking screw is very strong and I haven’t had a problem with slipd or anything close
Question:	What is the weight of this bench vise
Answer:	The 5-inch bench vise weighs 33 pounds.
Question:	How many positions can the vise be rotated and locked down? I have seen similar vises that only lock in 180 degrees of rotation
Answer:	Hello, The swivel base can rotate 360 degrees, also the head can rotate 360 degree.

Product features

Forward DT08125A 5 Inch Heavy Duty Rotating Bench Vise

Forward 5 inch rotating bench vise is the ideal industry heavy duty vise. It can be used for home craftsman, in the workshop, and even can be outdoor used. It's completely closed for preventing water, dirt & rust. If the vise can be normally operated, it will be lifetime using.

Powerful Jaws for Gripping Parts

Forward bench vise features three sets of jaws for gripping parts: Machinist Jaws, built in Pipe Jaws and V-Jaws.

Replaceable jaws with microgroove tooth space are made from high strength steel for superior grip.

Self Align Pipe Jaws

Forward bench vise offers Self Align Pipe Jaws.

These jaws adjust well to the work pieces to provide powerful clamping pressure while reducing marring.

Bigger Anvil

The bench vise painted with durable grey powder coat can be rotated up to 360-Degree on its base for work positioning.

3.2 X 2.6 inch bigger anvil brings more operation options & space.

Forward Multi-purpose Bench Vise - 360 Degrees

• The head of the vise can be rotated by 360 degrees for extra versatility.
• The base of the vise can also rotate 360 degrees, allowing for optimal work placement.
• The vise has four mounting holes to securely attach the vise to a workbench.

Mounting vise on the workbench, then do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise. It's of great convenience for industry and daily work.

Product description

Use to replace worn parts on a Mechanics vise. Main screw is made from machined steel with a rolled 2-start acme thread for wear-resistance and smooth operation. The fused steel handle is made to bend before the vise can be overstressed. Includes main screw, handle, nut, pin, spring, and washer. IRWIN Tools Record Replacement Main screw for No. 3 Mechanics Vise (T3C)

• Use to replace worn parts on a Mechanics vise.
• Main screw is made from machined steel with a rolled 2-start acme thread for wear-resistance and smooth operation.
• The fused steel handle is made to bend before the vise can be overstressed.
• Includes main screw, handle, nut, pin, spring, and washer.

User questions & answers

Question:	my irwin vise 6inch jaws only no. i can find is y305 y
Answer:	The packaging says Stanley , Bostitch, senco, accuset, task Force and PowerShot. There is no parker listed ad compatible.
Question:	how tall is the Vise nut? i have a vintage Columbian D44-M3. will this work
Answer:	It seems to fit but will fall off still.
Question:	Could this be sed to make a front vide for a workbench
Answer:	Yes I did and it did not fit.
Question:	Is there a similar replacement kit available for No 6 bench vice
Answer:	This is actually a blower/vacuum unit