12 best screw removers

Product description

◉ Stripped and Damaged Screw Extractor Set by Essential Tools

The must have tool for any handyman, car or boat mechanic, contractor, carpenter, woodworker, or anyone who constantly works with screws and bolts. You know how frustrating it can be to try to remove a broken or snapped screw head, stripped bolt, painted over deck screws and much more.

 

◉ 4 Piece Extractor Set with Storage Case Includes:

1) Removes screw size: 3-5mm

2) Removes screw size: 4-8mm

3) Removes screw size: 5-10mm

4) Removes screw size: 6-12mm

Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter.

 

◉ Quick and Easy to Use:

◈ First you want ensure that you are using a bit that is SMALLER than the screw you are trying to remove. That way it has enough room to drill a proper sized hole to extract.

◈ Slowly start to drill a hole into the screw head or bolt with the cutting size. This creates a cone shaped hole that makes it easy for the extractor head to grab onto

◈ Flip the drill bit to the extractor side. Reverse your drill and start slow to allow the threads to catch. Continue to screw or drill until the bolt or screw is fully removed

◈ And that’s it! Within a matter of seconds you easily removed that broken screw without damaging any of your other tools or bits. The high strength steel bit does all the work for you

◉ Specs:

◈ High Speed Steel 4341#

◈ Hardness 63-65HRC

◈ 4 Piece Set with included storage case

 

The Essential Tools Screw Extractor is the easiest and most reliable way to remove all your stubborn screws and bolts with ease

• APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
• POWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts
• EASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor tool
• HARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind
• WARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle

User questions & answers

Question:	Would this bit fit a screwdriver? And do you think I can remove a laptop screw in this manner
Answer:	it depends on how crafty you are using similar tools. I used to replace a star screw on a thin RAZER 15" laptop. I placed some pads between the table and the laptop, I didn't push too hard to press the extractor in to the screw so I didn't break the screen. also I would recommend to use very low revolutions in your drill otherwise this thing will perforate the screw and the hole in no time. If you are careful I think you can use it almost anywhere.
Question:	What is the smallest size bolt that can be removed with this extractor
Answer:	It's made in China. I couldn't find one made in the US.
Question:	Does anyone know if these will work on the tiny screws holding an rmr optic baseplate on the slide of a handgun? thanks in advance
Answer:	You should choose a size smaller than the screw hole, or you can watch the tutorial with a YouTube video
Question:	Is it safe use on a laptop
Answer:	Yes. I followed the directions that either came with the remover -- or I looked up on youtube. I can't remember. You may have to experiment with which size you use. I know the first one didn't work, but the second one was right. They did work o.k. with my problem.

Product description

Features:



◆ORIA 22 pieces screw extractor set can work with any drill and any screw size or bolt.



◆Great for stripped, broken, stuck or damaged and screw removal. It is made from S2 Alloy Steel.



◆With the high quality and high durable material of this set, it will be easy to extract the rusted, free-spinning screws and deck screws.



◆Besides, it comes with a tool box, which makes it easy to carry and take anywhere you want.





Note:



1. It is recommended to use electric hand drill instead of the hammer drill.



2. Must drill a hole first when the damaged screw surface is smooth. Otherwise the drill bit will slip.



3. When stripping the damaged screw, Must use it vertically in reverse and low speed (RPM≤200) throughout the whole process. Or you’ll get hurt.



Package Includes:



◆1 x Socket Adapter: 25.6mm*6.3mm



◆1 x Magnetic Extension Bit Holder: 57mm*6.4mm



◆1 x Box



◆20 x damaged screw extractor as following:



Drill Size (Length*Diameter)



#1: 5.9mm, 6.4mm



#2: 4.6mm, 6.4mm



#3: 3.5mm, 6.4mm



#4: 3.2mm, 6.4mm



#5: 2.9mm, 6.4mm



#6: 3.2mm, 4mm



#7: 3mm, 4mm



#8: 2.6mm, 4mm



#9: 2.4mm, 4mm



#10: 2mm, 4mm



Extract Size (Length*Diameter)



#1: 5mm, 6.35mm



#2: 4mm, 6.35mm



#3: 3.2mm, 6.35mm



#4: 2.3mm, 6.35mm



#5: 2mm, 6.35mm



#6: 3.1mm, 4mm



#7: 2.6mm, 4mm



#8: 2.2mm, 4mm



#9: 2.1mm, 4mm



#10: 1mm, 4mm

• 【High-quality S2 Alloy Steel】Damaged screw extractor set and bolt remover is made from high-quality S2 Alloy Steel, which is stronger and more durability than H.S.S steel. High hardness, durable and easily removes damaged screws.
• 【Reverse Use the Drill】 screw extractor adopts reverse principle to remove broken bits more easily, including 10 pieces of drills (Dr#1-#10), 10 pieces extractor (Ex#1-#10), 1 piece of extension bit holder and 1 piece of the socket adapter. They can work with general sizes drill and screw size or screwdriver handles tools.
• 【Wide Usages 】22 pcs different screw extractors, perfect for stripped, broken, stuck or damaged and screw removal; easily to extract the embedded, rusted and painted-over screws and bolts. This tool works on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few.
• 【Easy to Use 】 Just choose a smaller extractor than the damaged screw, then insert into the drill - flip tool-extract. Please use them on the electric hand drills rather than hammer drills. More importantly, when stripping the damaged screw, use it vertically in reverse and low speed (RPM≤200) throughout the whole process. Or you’ll get hurt.
• 【Portable】The screw remover set comes with an essential tool kit box, it's very convenient to put it into your bag or take it anywhere you want. You can easily remove any stripped screw in 10 seconds or less.

User questions & answers

Question:	Will this work on a screw with the head broken off
Answer:	No. You will need to use a screw extractor.
Question:	Is this electric (battery powered
Answer:	No, not electric.
Question:	What's the size of the storege case
Answer:	6 5/8" x 2 5/8" x 5/8"
Question:	How do you choose which size to use? I know it says a size smaller but which part are we measuring? I have tried a few sizes on my problem screws
Answer:	The screwdriver tip should fill the slot, but not overlap. You may need to use a longer handled screwdriver for more torque on the problem screws.

Product description

How to Use:



Step 1: Please ensure that the direction of rotation in the first step must be reversed.Select the right size and slowly start drilling a hole in the screw head or bolt. This will form a conical hole, making the extraction head easy to grasp

Step 2: Switch the bit to the extractor.When a constant downward pressure is applied to the screw and moving at a low speed, pulling out the tip will bite into the screw and pull out the damaged screw Features:



High Quality: This damaged screw removal tool kit is made of high hardness HSS 4341 (hardness 63hrc) alloy steel for durability.

Easy to Operate: In just two easy steps, only the drill bit is needed, no other tools are needed, choose a smaller than the damaged screw, you can easily remove the screw, please ensure that the hole is reversed during this process.



Specifications:

Color: silver

Material: HSS tungsten carbide tip

Packing: 6 Pcs

Length: 51mm/1.97in

Extractor specifications:

0#Remove diameter 2~4mm/0.08~0.16in

1#Remove diameter 3~5mm/0.12~0.2in

2# remove the diameter 4~8mm/0.16~0.31in

3#Remove diameter 5~10mm/0.2~0.39in

4# remove diameter 6~12mm/0.24~0.47in



List:

6*Double head screw

• 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws.
• HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
• USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw.
• MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work.
• QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is backed by our Highest Quality Promise

User questions & answers

Question:	Where is set made
Answer:	They should be identical just different sizes
Question:	I've tried 3 different sizes, following the directions each time, and I can't get the extractor side to bite in. What am I doing wrong
Answer:	It has a flip up metal handle to carry it, so yes you could put a couple of hooks on the peg board and hang it.
Question:	Do you drill in reverse for both steps? that's what the diagram that came with the tool seems to show, but i can't get these to work
Answer:	The clips are removable or can be added on this portable socket holder; however, the rails are not removable. Please contact us at [email protected] for additional questions.
Question:	Should the 5th bit from the left be smooth all the way around
Answer:	The 18” is the length of the tray, excludinng the handle.

Product description

This set is prepped for superior corrosion protection. Set can be used with flat wrenches, adjustable wrenches and sockets. The set includes: 1/4, 3/8, 1/2, 11/16 SAE; 10, 12, 13, 17 mm; 5/16 _ 8mm, 7/16_ 11mm, 9/16_14mm, 5/8_16mm, & 3/4_19mm, Universal sockets a total of 13 sockets. Covers both metric and Sae. When you have rounded, rusted, chewed, nuts and bolts this is a great set to have around when you need it. On occasion when the bolt or nut is too stubborn to turn, the socket may contribute to rounding the bolt or nut. The set is made to grip the nut or bolt so that you have an opportunity to turn it out.

User questions & answers

Question:	is it possible to be able to purchase just 13 mm socket or do i have to buy the entire set? i lost the 13 mm and i need to replace it
Answer:	Check the 32 piece version
Question:	who makes this set
Answer:	Don't know specifically, but it has every screw bit known to man!! I removed and replaced the system board in a Dell laptop which had several screw sizes. Good luck...
Question:	I stripped a15mm bolt on my brake caliper will the 14mm in this set work on my bolt
Answer:	No
Question:	Where is the product made
Answer:	I don't know the answer to that. I haven't try

• Made In Japan, VamPLIERS Patented Multi-Purpose Remove stripped rusted corroded, damaged, jammed screws, bolts, nuts
• Extract screws with unique or tamper-proof head, torx, one way security screws, Wire Cutter and Cable wire twisting made easy.
• Environmentally friendly, Comfortable grip made of elastomer ergonomic handle grips, RoHS Compliant smooth varnished finish
• Patented VAMPLIERS Technology vertically and horizontally serrated jaws which bite into screw heads without slipping
• Disclaimer: Specially hardened or glued screws may not be removed by VamPLIERS

User questions & answers

Question:	Will these work for one-way security screws, rather than drilling them out and using an extractor
Answer:	You can if you can get a grip the top of the screw head. Because some one-way security screws are usually flushed into the material (below the surface).
Question:	Where is this tool made? China or somewhere else
Answer:	It is made in Japan by Engineer Inc. - Futaba Tool
Question:	Is this the one Scotty Kilmer recommended
Answer:	It's from the same Company Vampire Tools Inc. and same registered Brand "Vampliers" but model is different, This Model is VT-001 ( manufacturer Part Number ) the model Scotty Kilmer talks about in his video is VT-001-8 (PRO) Manufacturer Part Number. They are both great set of pliers. first model is 6.25" and PRO model is 8" both comes with the VAMPLIERS Technology of screw extraction. This makes them unique in the market and "World's Best Pliers"
Question:	Does anyone know if these will work for screws where the head got torn off (only body of screw left
Answer:	They absolutely will work on screws with the head torn off. However, there must be a sufficient amount of shaft left for them to grip. If there is enough shaft left for a good grip, vice grips are an even better alternative if the screw is tightly stuck. You can even grip the exposed shaft with the Vampliers, which have superior grip due to the vertical teeth, and then clamp a large pair of vice grips onto the Vampliers' jaws for greater leverage and grip if the broken screw warrants such extreme measures.

Product features

One Bite and Done! Tools Built Tough!

An extraordinary plier which incorporates patented and award-winning technology to solve screw extraction problems. It is the all-purpose pliers with a unique feature. VAMPLIERS are made from carbon steel produced by Kobe Steel of Japan and is best suited for strength and durability. A combination of vertical and horizontal serrations prevents slip and provides a strong bite to grab the problem screw.

Have you ever been stuck with rusty, stripped, damaged, or jammed, and needed to be removed? VAMPLIERS can do the job with remarkable ease. VAMPLIERS will even work on screws that have special, unique, or tamper-proof heads. VAMPLIERS have a patented design of vertical and horizontal serrated inside jaws that bite into screw heads of various shapes without slipping. These serrations are what differentiate VAMPLIERS screw-removal pliers from ordinary pliers. They are much easier to use than screw extractors or locking pliers precisely because of the way it grips around truss, round, or pan head screws.

VAMPLIERS are made from -- treated high-quality carbon steel -- a raw material which commands the highest respect in the world of tools. VAMPLIERS have a smooth varnished finish and elastomer ergonomic handle grips. The specially shaped vertically serrated jaws are designed to remove rusted, damaged, or tamper-proof screws in confined spaces. The elaborate angle of serration also enables you to bite and turn truss screws (low-profile dome heads).

There are always reasons to celebrate: birthdays, anniversaries, promotions at work, graduations, Father’s, Mother’s, or Grandparent’s day’, or simply saying ‘thank you’. What better way to celebrate than to gift something practical and durable that will be remembered and used for a long time. VAMPLIERS make for such a unique and personalized gift.

VAMPLIERS 6.25"

Removes 99% of problems screws including stripped, rusted, corroded, stuck, one-sided, Torx screws, nuts and bolts. Designed with VAMPLIERS Technology. Target screws can be extracted using the top jaw or side jaw. Perfect slim nose for access to confined spaces. Ergonomic elastomer T-shaped handles for unmatched comfort. Wire cutters hardened to HRC58±2 (Rockwell standard). RoHS Compliant for use in various industries. Made in Japan from high carbon stainless Kobe steel.

Own the Best Linesman's Screw Extraction Pliers on the Planet!

Product description

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact Jellas first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

• [Technology-Leading] - Jellas 22pcs damaged screw extractor set made by HSS material can create more extraction possibilities for broken screws or bolts of different sizes (2-12mm) and can work on irregular and jagged irregular cuts; Extra gift of 2 common sizes (#3 & #6) enhances the longer service life of the product
• [Most Cost-effective] - HSS material with maximum protection against rust and corrosion, hardness can reach 64.5 HRC for strength, flexibility and durability; The notches on the extractor bits produce greater force for bolts that are difficult to remove; Aluminum box packaging, delicate and durable, can be presented as gifts to friends and relatives
• [Switching Tips Freely] - With the support of extension tips and a socket adapter, the separately designed burnishing tips and extraction tips allow for switching at will without wasting time and energy
• [Meet Any Requirement] - The extension bit holder (6.35 mm) and the socket adapter (4 mm) of the screw removal set fit all electric drills of any brand; The magnetism inside the support and the adapter prevents the tips from falling
• [Simple to Use] - The manual is included, everybody knows how to use; Separated burnishing tips (for perforation) and extraction tips simplify the working process, it is not necessary to turn the extractor upside down and rotate the drill holder again to extract

Product features

JELLAS Damaged Screw Extractor

Designed Tools seed New Stories

If you forget the pilot hole or drive a screw too quickly, a power screwdriver can spin its bit fast enough to strip away the cross or other shape in a screw. Once that’s gone, the screw can’t be driven deeper or backed out. For screws where the stripped screw head rests flush with the wood (and you don’t want to risk damage to your project), then you may need a screw extractor.

Jellas 22 pieces extractor screws to extract screws made of advanced High Speed steel (H.S.S), twice tempered for extra hardness and is up to 64-65HRC; It can extract screws from 2 to 12 mm. Our screw extractor set works with any drill and any size of screw or bolt, great for those stubborn, broken, blocked or damaged and also for simple removal of screws, Jellas Screw extractors are designed to help you with that.

Attentions

The screw extractor is to keep the frictional locking force between the #drill/#extr bits and the damaged screws under control which will take a few more times if you are a new user.

First of all, our product hardness is 64 HRC-65 HRC, if the damaged screw hardness is higher than that, which will make the extractor bit shear off into bolt easily. Please contact out seller center first when you decided to purchase. We will tell if this product suits or not. Another important thing is that you should be careful of the working speed of the electric drill, and should keep the speed under 200 rpm, as the bit may break for high speed use. Also you can use a wrench to extractor. The lower speed, the better, which will also help you not make the frictional locking force out of control and protect the screw extractors not breaking.

Instructions for Use

Drilling the Screw

Step1, It is better to use a drill rather than a screwdriver.

Step2, Please press the reverse button on the drill to prepare the electric drill for use.(Don’t need to reset the reverse button the whole process.)

Step3, Select a drill bit slightly smaller than the screw. Hold the drill bits up to the screw or fastener you need to remove. The right one will be slightly less wide than the screw head. When you find the right one, attach it to your drill.

Step 4, Line the drill bit up with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus on holding the drill bit steady so it drills straight down into the screw head.

Step5, Drill a hole for the extractor. You will need to drill somewhere between 1⁄8 inch (3.2 mm) and 1⁄4 inch (6.4 mm) into the screw head. The depth depends on the screw extractor you have. Hold up the extractor to compare it to the hole you drilled. If the extractor doesn’t fit, keep drilling to widen the hole.

Pulling out the Screw

Step1, Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it’s in there, but don’t force it. The loose end should have a tap handle, which looks like a T, for you to hold onto. Twist the extractor counterclockwise until you can’t turn it anymore.

Step2, Twist the extractor with a wrench or drill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise until the screw pops free. Many extractors are designed to work with drills. Attach the free end of the extractor to the drill and turn on the drill to turn the screw counterclockwise. It’ll come out without much resistance.

Product description

Screw Extractor Set of 6



Made of high-density and high-quality 4341 high-speed Steel with 63-65hrc hardness.



Instructions:



➭Step 1 - First, you must make sure that the screws used are smaller than the screws you want to remove. Make sure there is enough space to drill holes of appropriate size for the screw extraction.



➭Step 2 - Start with the drill tip and drill down to create a smooth hole. Make sure the drill rotation is “forward”.



➭Step 3 - Switch the drill bit to the extraction tip. Change the Drill rotation to “reverse”. Apply a slow and constant downward pressure on the screw and move it at a low speed. The extraction tip will bite into the screw and pull out the damaged screw. It can be easily removed in just a few seconds!



Note:



Metal shavings are produced during the drilling process, remove all shavings before extraction.

About the screw extractor:

Material: HSS steel with titanium plated surface

Color: Silver

Tool holder type: Hexagon tool holder



Recommended Screw Extractor for screws and bolts with diameter measuring:



Bit Imperial Metric



#0 smaller than 3/32” (smaller than 3mm)



#1 3/32” – 3/16” (3mm-5mm)



#2 5/32” – 5/16” (4mm-8mm)



#3 3/16” – 13/32” (5mm-10mm)



#4 1/4” – 15/32” (6mm-12mm)

• 🔧【Highest Quality Screw Extractor】--Our screw extractor kit is made of durable high hardened steel--H.S.S 4341 with hardness 63-65hrc. Designed for easily removing screws and bolts. Includes 6 common sizes extractors works with any drill and any size screw or bolt. An It's an essential part of every tool kit box.
• 🔧【Wide Compatibility】--can be widely used in household,telecommunication,automotive or machinery repair work.Suitable for general sizes and all kinds of broken bits. Universal chuck that suitable for most electric hand drills. Remove broken screw in one step.
• 🔧【Tips for Use】-- It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use. Must drill a hole first when the break screw surface is smooth. Otherwise the drill bit will slip. Must be vertical and low speed when drilling, reverse use this bit, drill the first hole deeper will easier to take out.
• 🔧【Easy to Use】-- One drill gets everything done. Use the drill(Dr) bit to drill a hole in broken screws. Change to use the extract(Ex) bit with the same size. Reverse use the drill and take out the broken bit.
• 🔧【Good After-Sale Service】--We always stand behind our product. If you have any problems with the product, just contact us any time. We will provide solution within 12 hours.

Product description

【EASY TO CARRY】- Our products are packaged in a storage tool box to ensure that you will not lose one ! You can take it with you and use it for home, telecommunications, car or mechanical maintenance work. 【Damaged Screw Extractor】Screw extractor is made of high quality High-Speed Steel 4341. High hardness, durable and easily remove damaged screws. 【Important】It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!

• 【ALL-PURPOSE Screw Extractor Drill Bit Set】: Package including 10pcs drills (Dr#1 to #10), 10pcs extractor (Ex#1 to #10), 1-piece extension bit holder and 1-piece socket adapter. In 10 different sizes to satisfy all you demand. Suitable for any sizes screw or bolt.
• 【Wide Usages 】22 pcs different screw extractors, perfect for stripped, broken, stuck or damaged and screw removal; easily to extract the embedded, rusted and painted-over screws and bolts. This tool works on Allen bolts, Machine Screws, Lag Bolts, Wood Screws, Hex Bolts, Sheet Metal Screws, Rounded Bolts to name a few.
• 【EASY TO CARRY】- Our products are packaged in a storage tool box to ensure that you will not lose one ! You can take it with you and use it for home, telecommunications, car or mechanical maintenance work.
• 【Damaged Screw Extractor】Screw extractor is made of high quality High-Speed Steel 4341. High hardness, durable and easily remove damaged screws.
• 【Important】It is best to use electric hand drill, can not be used the hammer drill mode! Must be low speed during use!

Product description

Micrograbit, Micro Power Screw Extractor Set, Contains P125, P164, P190 & P236, Will Extract Screw Sizes #5 Up To 1/4" Or M3 Up To M6, Drill & An Extractor In One Tool, Capable Of Drilling & Extracting Grade 8 & Stainless Steel, Worldwide Patents.

From the Manufacturer

Micro Grabit 4 piece extractor kit can quickly remove broken bolts and screws and (flip style) even drill on center using a 1/8 in. variable speed reversible rotary power tool (slow speed) or quality power screw driver with expandable chuck or 3/8 inch reversible power drill for the 2367P. Quickly and easily removes most broken bolts No. 5 and 6 (3mm) to 1.4 inch (6mm) from wood, metal or plastic. Can drill up to grade 8 and class 10.9 bolts. Precision engineered for multiple extractions and maximum performance. Serrated extracting end of tool results in greater torque for hard to remove bolts. For further information call 800-832-5336 8am - 5pm EST M-F.

• The product is a Micro Power Screw Extractor Set
• Two-step drill bit and extractor in one tool with a self centering drill tip; no walking or wandering. No grinding, center punching required.
• Works on jagged uneven rough breaks. No grinding, Center punching required.
• Tempered twice for extra hardness. Results in multiple extractions per tool.
• Made from M2 HSS. Highest quality steel used and made in the USA.

User questions & answers

Question:	Hi I need extractors that can work on small screws such as 2mm-6mm will this set do it or is there another
Answer:	the manufacturers site has the sizes of screws for these. I think these will work but check the site
Question:	The head of a 1/8" screw broke off when trying to drill the screw in Drywall. Will this work to remove the broken screw thats stuck inside my drywall
Answer:	I wouldn't recommend it. The Grabit is designed to remove a screw (in your case a drywall screw), where the slots in the head of the screw have been worn or damaged to the extent that the driver can't get enough "bite" to turn it. The Grabit drills into the head of the screw to the depth and width that allows the reverse-threaded extractor to get enough "bite" to turn and back out the damaged screw. In your case I assume that the head of the screw broke-off, so there's an insufficient metal surface for the Grabit to do its job. If the screw stem extends out beyond the surface of the drywall, I'd suggest grabbing it with a pair of vise-grips and turning it back out. But, use care as drywall crumbles like a stale cookie. Now, if the screw shaft is below the surface of the drywall, then spackling and a putty knife will do the trick.
Question:	Will this work for a stripped set screw in a bathroom delta faucet handle? Anyone know? Thanks
Answer:	While I can't speak to your specific faucet, many do have small screws that this kit would be successful for.
Question:	Will this work on pentalobe screws on the MacBook Pro 13" retina display
Answer:	Yes, the Micro Grabit® 4 Piece Kit contains the Micro Grabit® #1 that is rated down to 3mm head size. The MacBook Pro 13" Retina uses a eight 3 mm and two 2.3 mm pentalobe screws externally to attach the bottom plate of the case to the internal frame.

Product description

BOLT EXTRACTOR

• Made of high-hardness chromium-molybdenum steel for durability
• All the bolt extractors are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen
• Tight grips and won’t let go, the internal thread design provides excellent torque, the more you turn, the tighter the socket grips
• 13 pieces 3/8 inch drive bolt & nut remover comes with 3/4"(19mm), 11/16", 17mm, 5/8"(16mm), 9/16"(14mm), 13mm, 1/2", 12mm, 7/16"(11mm), 10mm, 3/8", 5/16"(8mm), 1/4". Also this bolt extractor tool set includes a 3/8-inch reversible ratchet, a 1/4-inch adapter and a striking tool ( If the broken screw is stuck in the remover, you can use the hammer and the strking tool to knock it out
• All pieces are housed in a compact carrying case for storage and portability

User questions & answers

Question:	Where is is made
Answer:	the depth is about 1" deep !!
Question:	Are these impact rated
Answer:	No it does not. This thing last me 2-3 days a charge and charges fully in about 30-45mins

Product features

Superior Connection

Made of high hardness chrome molybdenum steel for superior durability, all the extractors have special thread designed to bite into a rounded bolt head for amazing grip power on even painted or rusted nut

3/8-inch Reversible Ratchet

Comes with a long handle 3/8-inch reversible ratchet, a 1/4-inch adapter and a striking tool. If the broken screw is stuck in the remover, you can use the hammer and the striking tool to knock it out.

Comapct Case

All pieces are housed in a compact carrying case for storage and portability

Product description

ABOUT US:

Each of our screw extractors is made of high density and high quality 63-65hrc 4341 steel. We believe that only quality and reputation can bring us more customers.We want our customers to buy the best products at the lowest price.



Quality Control:

Each bit is subjected to a rigorous quality inspection to determine its quality, hardness and fastness to thread before being approved by the quality control department.We ensure every screw extractor delivered into customers is perfect



Product description:

. The Screw Remover Set grab damaged fasteners with speed and precision

. High efficiency, high quality, and user-friendly, the RWYMQWT Screw Remover Set is made to make tough jobs easier

. It will remove various screws or bolt of sizes from different materials and easy and quick to use

. It's compatible with Quick Connect Chuck Systems and works with kinds of drill. Stubborn and work well. Great for you!



Package included:

5 x RWYMQWT Screw Remover

A case for storage



Recommended use on screws and bolts with diameter measuring:

0# for Diameter 2~3mm

1# for Diameter 3~5mm

2# for Diameter 4~8mm

3# for Diameter 5~10mm

4# for Diameter 6~12mm



Note:

Please buy from RWYMQWT-Direct

• 【 Durable】The Screw extractor is made from 4341 high quality speed with 65 HRC hardness, which the density and hardness are about 20 percent higher than the average steel on the market
• 【5 - Pieces Bolt Extractor Set】This Damaged screw extractor kit （#0/#1/#2/#3/#4）works with any drill and all the screw size or bolt (3-12mm), and there is a box to save these screw extractors, very portable and convenient
• 【Easy To Use】It's a very simple step. Just select a drill bit smaller than the damaged screw and you can easily remove the damaged screw. Please follow the picture to ensure that the drill is oriented correctly
• 【 Titanium】We have added a layer of titanium to the screw extractor, which makes the stripped screw extractor removes easier to store, does not rust and corrode, and looks better
• 【Useful】Suitable for hexagon socket bolts, square head screws, wood screws, hexagon head screws, mechanical screws, sheet metal screws and other screws, even remove the most stubborn peeling, damage, embedded and painted bolts and screws

User questions & answers

Question:	Will this work on rc cars
Answer:	Not sure. I tried to use it to extract a larger screw (#10×1") and it failed. The screw didn't budge. Use an alternate method of extraction. Not a fan of this product.
Question:	It has a Titanium coat? like others
Answer:	Yes, this broken screw extractor is titanium plated, no rust, 5 sizes
Question:	How small is the smallest
Answer:	smaller than 3/32” / 3mm
Question:	Where are these made
Answer:	Thanks for your question!!! It is made in China

Product description

Stripped and Damaged Screw Extractor Set

The must have tool for any handyman, car or boat mechanic, contractor, carpenter, woodworker, or anyone who constantly works with screws and bolts. You know how frustrating it can be to try to remove a broken or snapped screw head, stripped bolt, painted over deck screws and much more.





Easily removes screw and bolt head types from flat head, phillips, hex, allen, torx, square, round and any other type of stripped screw or bolt you encounter.





Quick and Easy to Use:

First you want ensure that you are using a bit that is SMALLER than the screw you are trying to remove. That way it has enough room to drill a proper sized hole to extract.





Slowly start to drill a hole into the screw head or bolt with the cutting size. This creates a cone shaped hole that makes it easy for the extractor head to grab onto.





Flip the drill bit to the extractor side. Reverse your drill and start slow to allow the threads to catch. Continue to screw or drill until the bolt or screw is fully removed.





And thatâ€s it! Within a matter of seconds you easily removed that broken screw without damaging any of your other tools or bits. The high strength steel bit does all the work for you.





Specs:

High Speed Steel 4341

Hardness 63-65HRC

5 Piece Set with included storage case





Screw Extractor is the easiest and most reliable way to remove all your stubborn screws and bolts with ease

• 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(0, 1, 2, 2, 3, 4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws.
• HIGH QUALITY 63-65HRC: Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mind.
• EASY TO USE: Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite†into the damaged screw, and then you can easily remove the screw.
• MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ outâ€, highly suitable for various machinery repair work.
• 100% Satisfaction:We are committed to offering you high quality products and patient service. Any problems, please contact us,we will definitely give you a satisfactory answer.