9 best lansky knife sharpener diamonds
Lansky is a well-known brand in the field of knife sharpening tools, and they offer a variety of knife sharpeners, including systems that use diamond stones. Here's what you need to know about Lansky knife sharpener diamonds:
Diamond Sharpening Stones: Lansky's diamond sharpening stones are a type of abrasive stone used to sharpen knives and other cutting tools. These stones use diamond particles bonded to a metal substrate as the abrasive material. Diamond stones are known for their exceptional hardness, which makes them effective at sharpening even the hardest steel blades.
Grit Levels: Lansky diamond sharpening stones come in different grit levels, typically ranging from coarse to fine. Coarse stones are used to repair and reshape damaged or dull edges, while finer stones are used for honing and polishing the edge to achieve a sharp and smooth finish.
Lansky Sharpening Systems: Lansky offers sharpening systems that include a set of diamond sharpening stones along with a sharpening guide system. These systems are designed to help users maintain a consistent angle while sharpening their knives. The sharpening angle is crucial for achieving a sharp and consistent edge.
Versatility: Lansky diamond sharpening stones are versatile and can be used for sharpening a wide range of cutting tools, including kitchen knives, pocket knives, hunting knives, and even woodworking tools. They are suitable for both straight-edge and serrated blades.
Durable and Long-Lasting: Diamond sharpening stones are known for their durability and long lifespan. They tend to last longer than traditional water stones or oil stones, making them a cost-effective choice in the long run.
Easy Maintenance: Diamond stones are relatively low maintenance. Unlike water stones, they don't require soaking before use. You can simply clean them with a brush or a rinse of water to remove metal particles and debris that accumulate during sharpening.
Considerations: When using diamond sharpening stones, it's important to be mindful of the pressure applied during sharpening. Excessive pressure can cause the diamond particles to wear unevenly, affecting the sharpening results. It's recommended to follow the manufacturer's guidelines for proper use.
In summary, Lansky knife sharpeners with diamond stones are reliable and effective tools for keeping your knives and cutting tools sharp. They offer durability, versatility, and the ability to maintain a consistent sharpening angle, making them a popular choice among both professional chefs and amateur knife enthusiasts.Choosing the appropriate grit level for your specific sharpening needs is essential to achieve the desired sharpness and finish.
Below you can find our editor's choice of the best lansky knife sharpener diamonds on the market
Lansky 4-Stone Deluxe Diamond System | Precision Knife Sharpening Kit
Lansky
Product description
The 4-stone deluxe diamond controlled-angle sharpening system ensures that your knife edge sharpens to the exact bevel you specify. Designed to give your blade a professional, razor sharp edge every time, regardless of your sharpening ability. Excellent for beginners and advanced users alike. The original and legendary controlled-angle system is the ultimate in knife sharpening technology.
Key Features:
- Hones include: Extra Coarse Diamond (70 grit), Coarse Diamond (120 grit), Medium Diamond (280 grit), and Fine Diamond (600 grit)
- Precision-engineered, multi-angle, flip-over knife clamp
- Sharpening hones on color-coated, finger-grooved safety holders
- One guide rod for each honing stone
- Specially formulated honing oil
- Extra long knife clamp screws
- Custom molded storage/carrying case to hold all system components
- Complete easy-to-follow multi-lingual instructions
Sharpening Angles:
- 17 degrees: A severe angle recommended for razor blades, X-Acto blades, scalpels or similar tools. Provides an extremely sharp but delicate edge.
- 20 degrees: A commonly used angle for higher quality blades and provides an excellent edge for kitchen cutlery and filet knives.
- 25 degree: The recommended angle for most knives that need a durable, sharp edge. Ideal for hunting and outdoor knives.
- 30 degree Angle: An outstanding angle for knives that see the heavy use of cutting cardboard, wire or carpets. Recommended for heavy duty use.
- Knife clamp with angle selector
- Custom molded storage/ travel case
- Four guide rods
- Soft bristle nylon brush
- Four finger-grooved sharpening hones
- Deluxe 4-stone diamond knife sharpening system for kitchen, hobby, or garden knives
- Includes extra-coarse, coarse, medium, and fine diamond hones
User questions & answers
| Question: | I have the Lansky set with natural stones. Looking at buying the diamond set. How does one clean the stones to remove metal build up |
| Answer: | I think the answer to this was a bit hasty. The first thing to know is serrations are typically only sharp on one side. Only sharpen that side and leave the other side flat. You use the edge of the stone to sharpen a serration. Turn the stone about 30 degrees clockwise in your hand and run that edge where the two edges meet 90 degrees. More then basic sharpening is pointless as this uses a saw motion not a slice motion to cut. Lansky and many others now make triangle shaped stones specifically for this.All that being said, serrated knives are like prostitutes. You use them and abuse them and rarely give them any love. |
| Question: | How do you clean the sharpeners |
| Answer: | The biggest difference between the $35 set and the $63 set is that the more expensive set is comprised of diamond impregnated steel. This adds to the product's longevity and ability (when using courser stones). The less expensive model uses natural stones and/or ceramic blends which degrade more quickly than the diamond stones. Also, they don't have the quick re-profiling power the diamond stones possess.Both are excellent products, but I personally own and love the diamond set. The aforementioned reasons are why I initially purchased the diamond set over the natural stone set.Hope I helped,Dave |
| Question: | Can this set be used on serrated blades |
| Answer: | If I understand your question, the assembly that holds the knife has a built in handle that steadies the unit as you sharpen. I mounted the assembly to a finished board which gives me increased stability, and catches any oil dripping off the blade as you sharpen. I hope this is about what you're asking. In any case, it's a GREAT sharpening system! |
| Question: | Can anyone tell me the difference between this system for $63 and the other one here for about |
| Answer: | I've never used Lansky, but I can say the Gatco sharpening system works very well. I do believe you will be very happy with it. |
Product features
LANSKY 4-Stone Deluxe Diamond Precision Knife Sharpening Kit
The Lansky controlled-angle sharpening system was designed by Arthur Lansky Levine in 1979. A first of its kind, the knife sharpening system was a hit with consumers, and remains our most popular item.
The Lansky controlled-angle knife sharpening system is an easy-to-use sharpening solution that helps you get a razor sharp edge every time. It comes in seven kit varieties, with three to five sharpening hones per kit.
Controlled Angle Sharpening Systems
Designed to give your blade a professional, razor sharp edge every time. The knife clamp holds the knife in place while it's guide holes maintain angle consistency when sharpening. This provides the user superior results regardless of their knife sharpening experience.
Securely attach knife clamp to blade
Assemble hone on guide rod
Sharpen one side, then flip
Lansky Sharpeners
Because diamond sharpening hones are made up of a metal plate, coated with mono-crystalline diamond, they will wear over time with use, and the hones will need to be replaced. How soon that may happen depends on how often the hone is being used, the hardness of the steel being sharpened, and the amount of pressure used during the sharpening process. Because a diamond hone wears faster and has a shorter life cycle than a man-made alumina oxide hone, we suggest using just the weight of your hand while sharpening. NEVER use honing oil on the diamond hones as it may clog the diamond, resulting in a smooth surface. When trying to “remove” steel, use your coarser diamond hone and finish with your fine diamond and a ceramic or alumina oxide hone.
Usage:
The knife clamp included in the system holds the knife steady, and holds the angle guide static and firm, so that the user can achieve the desired angle with every stroke of the knife sharpener. The Extra Coarse to Fine diamond hones provide an excellent range of grits for edge care and maintenance. Sharpening System has been the most preferred, and best sharpening system.
Lansky Retractable Diamond Pen Knife Sharpener, Black, One Size (DROD1)
Lansky
Product description
The all-new Lansky Diamond Pen is perfect for sharpening small
pocket knives, serrated blades, and fish hooks. The
retractable 600 grit sharpening rod stores easily
within the plastic casing. The 3-sided
Diamond Pen gives users the ability to
sharpen serrations of various
sizes.
- Retractable 600 grit diamondsharpening rod
- Lightweight plastic casing with clip
- Length: 5 inches
- 600 grit sharpening rod
- Sport Type: Hunting
Lansky D-SHARP Diamond Pull Through Quad Angle Knife Sharpener, Green (DSHARP)
Lansky
Product description
The latest addition to Lansky’s SHARP line, the all-new D-Sharp features four sharpening angles (17, 20, 25 and 30) in 600 grit diamond. It also has a fine ceramic benchstone that can be used for polishing straight or serrated blades. Perfect as a Lansky System accessory, or as a stand-alone sharpening solution.
- 4 sharpening angles (17º, 20º, 25º, and 30º)
- Ceramic Benchstone for fine polishing andserrations
- 600 grit medium diamond pull-through slots
- 800 grit ceramic serrated mini benchstone
- Durable metal casing
User questions & answers
| Question: | Can this be used to sharpen a Estwing hatchet |
| Answer: | Hatchets and axes typically are difficult to sharpen on a pocket size tool. You could, but there are probably better options. |
| Question: | What's the difference between this d-sharp model and their q-sharp model |
| Answer: | The grit of the sharpening surface. D means diamond coated. C Sharps are ceramic. |
| Question: | What is the advantage of the d-sharp over the c-sharp for say, your averade edc knife/ka-bar/outdoor cutter |
| Answer: | C is for topping off a ceramic stone edge and D for a diamond stone edge as far as I know. |
| Question: | Will this sharpen cpm-20cv |
| Answer: | I use d and C sharp to clean up or reset a bevel and a lansky diamond or Ruxin 008 pro to finish a blade. You should be able to maintain an edge with a D sharp. Hope this helps. |
Lansky Diamond Ceramic Turn Box TB-2D2C
Lansky
Product description
The Turn Box family is a very stable and compact knife sharpening system. It works well in the kitchen and it quickly breaks down for storage in a drawer. The turn box family of knife sharpeners is also great for outdoorsmen on the go because it is lightweight and stores easily into a backpack. It only takes a few swipes to maintain an edge. There are two pre-set knife sharpening angles in the wood block 20 degree and 25 degree. This two stage knife sharpening system features a hardwood turn box with internal rod storage in the base, two 5" long medium diamond rods (600 grit), and two 5" long fine ceramic rods (1000 grit).
- Stable and compact
- Two pre-set knife sharpening angles in the wood block 20 degree and 25 degree
- Two 5" long medium diamond rods (600 grit), and two 5" long fine ceramic rods (1000 grit)
- Two Pre-Set Knife Sharpening Angles In The Wood Block 20 Degree And 25 Degree
- 25 Degrees-This Is Used For Most Kitchen Knives And Provides A Sharp, Durable Edge
- 20 Degrees-This Is Used For Those Desiring A Very Sharp Edge
- Two 5-Inch Long Medium Diamond Rods, And Two 5-Inch Long Fine Ceramic Rods
User questions & answers
| Question: | What diameter are the rods |
| Answer: | approximately 3/8" diameter |
| Question: | Has anyone compared to the spyderco sharpener? I bought a spydy knife (without there sharpener)and I'm finding this difficult to sharpen. Thanks |
| Answer: | Whether you have a lansky or spyderco rod sharpener system the technique to sharpen your knife is the same. I use the lansky system and it sharpens all my knives scary sharp. Just watch a you tube video on either system and follow directions on how to use system and you will have a sharp edge on your blade |
| Question: | why is this set almost twice as much as the other lansky turn box set? i know this one has one set of rods that are coarser, but is it really worthit |
| Answer: | Because this set comes with a set of diamond rods conpared to the other set which comes with a set of medium rods and a set of fine rods. I will say that i was able to sharpen a 8cr13mov small blade well because of the coarse rods. I was having trouble sharpening the same knife with my lansky 5 stone deluxe system (wasn't able to form a bur). The coarse rods allowed me to do so. They have come in handy. Hope this helps |
| Question: | how is this different than lansky 4-rod turn box crock stick sharpener (lcd5d |
| Answer: | The 2D2C comes with 2 fine grit ceramic and 2 diamond rods. The Two-stage Crock Stick sharpener (LCD5D) comes with two sets of medium grit and fine grit 5-inch ceramic rods. Both are good, and I have both. The diamond rods are more aggressive for a particular dull knife. How's this for an analogy to sandpaper: Diamond - 100 grit, Medium - 200 grit, and Fine - 400 grit. And the 2D2C is a little more expensive. I hope this helps. |
Product features
Lansky Diamond/Ceramic 4-Rod Turn Box
The Turn Box family is a very stable and compact knife sharpening system. It works well in the kitchen and it quickly breaks down for storage in a drawer. The turn box family of knife sharpeners is also great for outdoorsmen on the go because it is lightweight and stores easily in a backpack. It only takes a few swipes to maintain an edge (a bit more if you have a really dull knife).
There are two pre-set knife sharpening angles in the wood block: 20 degree & 25 degree.
25 Degrees - This is used for most kitchen knives and provides a sharp, durable edge.
20 Degrees - This is used for those desiring a very sharp edge. Some examples would be for filet knives or cutting tomatoes. Lower degrees result in sharper knives, but require more regular maintenance.
This 2-Stage Knife Sharpening System features a hardwood turnbox with internal rod storage in the base, two 5" long medium diamond rods (600 grit), and two 5" long fine ceramic rods (1000 grit).
Lansky Diamond Pocket Stone Sharpener LDPST
Lansky
Product description
This Diamond Pocket Sharpening Stone includes a full diamond sharpening surface on both sides. Sharpening groove for hooks & other pointed objects. Convenient carrying pouch.
- 1" x 3" diamond grit sharpener.
- Full diamond sharpening surface on both sides.
- Sharpening groove for hooks and other pointed objects.
- Comes with a convenient carrying pouch.
User questions & answers
| Question: | What grit is this stone . . . coarse, medium, fine |
| Answer: | fine grit diamond. |
Lansky Coarse Diamond Hone LDHCR
Lansky
Product description
Designed for use with the Lansky Controlled Angle Sharpening System. Diamond Coatings are the most abrasive type of sharpener; they're ideal for modern, wear resistant tool steels. The coarse 120 grit diamond hone is perfect for repairing and sharpening a very dull edge.
- The coarse 120 grit diamond hone is perfect for repairing and sharpening a very dull edge.
- Designed for use with the Lansky Controlled Angle Sharpening System.
- Coarse Grit (120) Diamond Surface (Uninterrupted Diamond Coating)
- Brass Threaded Insert for Stainless Steel Thumb Screw
- Ergonomic Plastic Housing
- Made in the USA.
User questions & answers
| Question: | Photo appears to show the Lansky coarse stone, not the coarse diamond hone. Is what's being sold here a stone (green back) or diamond (purple back |
| Answer: | The item is the coarse diamond with purple back - the photo with the black or green back is incorrect |
| Question: | How does the grit of this coarse diamond hone compare to the coarse hone in the standard stone set? Same, more, or less coarse |
| Answer: | Well, it's kinda difficult to answer that question, but I'm comparing it to a standard sharpening stone I bought at wal mart, and they seem to be equal in courseness. Thanks. |
| Question: | Is this good enough to reprofile D2 or would you need to step down to the extra coarse, then move to this stone |
| Answer: | Yes it will be good enough to reprofile a D2 blade, but if you find that it takes a lot longer to reprofile get the extra coarse diamond hone. Just be careful, the diamond hones take off a lot of metal if you’re not paying attention! |
Lansky 2- Inch Diamond Pad on 6- Inch Handle, Coarse
Lansky
Product description
These sharpeners are ideal for sharpening and maintaining an edge on various tools and knives. The 6" tool features a rubber over-molded handle for greater comfort and better gripping and a 1.875" X .75" diamond grit sharpening surface. The sharpening pads are available in 5 grits.
- Ergonomic handle
- Full Diamond Surface
- 1.875" X .75" diamond grit surface
- Useful in the shop and outdoors
- Lifetime warranty against manufacturers defects
Lansky 6"x2" Diam. Stone-Ultra Fine Benchstone w/ self-storing base LDB6E
Lansky
Product description
Lansky’s Diamond Bench Stones are designed for expert knife sharpening and woodworking tool care. All Lansky Diamond Bench Stones feature a full edge-to-edge diamond grit surface for quicker, more efficient sharpening. They are available in two sizes and five grits. Lansky’s Diamond Bench Stones feature a high-impact plastic self-storing case that raises the stone for maximum safety and comfort. The base comes with non-slip rubber frame.
- Lansky’s Diamond Bench Stones are designed for expert knife sharpening and woodworking tool care.
- All Lansky Diamond Bench Stones feature a full edge-to-edge diamond grit surface for quicker, more efficient sharpening. They are available in two sizes and five grits.
- Lansky’s Diamond Bench Stones feature a high-impact plastic self-storing case that raises the stone for maximum safety and comfort.
- The base comes with non-slip rubber frame.
Lansky Extra Coarse Diamond Accessory Hone Silver Holder
Lansky
Product description
Use with all Lansky Controlled Angle Sharpening Systems. All hones are interchangeable and are mounted on their own color-coded finger grooved handles.
- Country Of Origin: China
- Package Height Of The Item Is 0.8"
- Package Length Of The Item Is 8.5"
- Package Width Of The Item Is 3.8"
User questions & answers
| Question: | Does lansky have a sharpening system to sharpen a spoon knife. Or somtimes called a spooning knife |
| Answer: | They do sell stones for curved knives |
| Question: | Is the diamond monocrystalline |
| Answer: | Lansky says that the structure is monocrystalline. From Lansky "Because diamond sharpening hones are made up of a metal plate, coated with mono-crystalline diamond, they will wear over time with use, and the hones will need to be replaced. How soon that may happen depends on how often the hone is being used, the hardness of the steel being sharpened, and the amount of pressure used during the sharpening process. Because a diamond hone wears faster and has a shorter life cycle than a man-made alumina oxide hone, we suggest using just the weight of your hand while sharpening. NEVER use honing oil on the diamond hones as it may clog the diamond, resulting in a smooth surface. When trying to “remove” steel, use your coarser diamond hone and finish with your fine diamond and a ceramic or alumina oxide hone." |
| Question: | Is this a more course grit than the purple diamond hone |
| Answer: | Most definitely. The purple diamond is 120 grit, this one is 70. This one takes out a LOT of metal quickly. I use this to completely reprofile blades, or restoring deeply damaged and neglected blades. I never even touch this one for routine sharpening. |
| Question: | What's the grit for the stone |
| Answer: | It does not specify the grit. I'd guess it's around 100. only for reprofiling and repairing damaged edges. |
