11 best irwin tools bolt cutters

Product description

The IRWIN VISE-GRIP Multi-Tool Wire Stripper/Crimper/Cutter is a must-have for anyone performing electrical work. With an induction hardened cutting edge, this single tool combines a wire stripper, wire cutter, and crimper into one tool that strips and cuts 10-22 AWG, crimps insulated and non-insulated terminals, and cuts bolts to size with a perfect lead thread. This handy tool features a pliers nose for pulling and looping wire and ProTouch grips for maximum comfort and reduced hand fatigue to keep working all day. Meets or exceeds all ANSI standards.

• Wire cutter with induction hardened cutting edge stays sharp longer
• Strips and cuts 10-22 AWG
• Pliers style nose allows wire stripper to pull and loop in wire
• Bolt cutter cuts bolts to size and leaves perfect lead thread
• Crimps insulated and non-insulated terminals

User questions & answers

Question:	Anyone uses it for jewlery making? How is it? Thanks
Answer:	I've never used it for jewelry but it cuts wire very crisply and the nose has a flat crimper that would close small metal parts easily.
Question:	does it cut guitar strings ? how about bike break cable
Answer:	As a bike mechanic, I would highly recommend getting a tool specficially for cable cutting. It's a curved blade that won't fray the stands. I expect steel cables will dull this blade quickly.
Question:	How can you tell which crimp area to use? The color codes on the tool show 2 "ranges" of wire gauge, but it looks like there are 3 crimp areas
Answer:	On the left there is a label ("INSUL AND NON-INSUL") that points the center of the two places to crimp, with the one closest to the pivot color coded for blue and yellow connectors (or 16 - 10 gauge), and the next crimp area for red connectors (or 22 - 18 gauge). The bump on the right side between the two is not meant for crimping.
Question:	Where are these made
Answer:	Thank you for contacting Irwin Tools. The country of origin for this self adjusting wire stripper is Taiwan.

Product features

IRWIN VISE-GRIP Wire Strippers

Get the job done right with IRWIN VISE-GRIP Wire Strippers. Featuring comfortable, textured-grip handles, and special features such as AWG selection dials, spring-assisted jaw openings, built-in crimpers, quick-release locks, and dual-metal construction (features depend on model), IRWIN VISE-GRIP Wire Strippers are the tools you need to get electrical and other wire-based work done faster, easier, and with less hand fatigue.

IRWIN Self-Adjusting Wire Stripper

Self-adjusting stripper strips wire from 10-24 AWG.

IRWIN Multi-Tool Stripper/Crimper/Cutter

Induction hardened cutting edge stays sharp longer.

IRWIN Wire Stripper/Crimper/Cutter

6 stripping stations for 10-24 AWG selection adjusts for stripping wire of varying gauges.

IRWIN Wire Stripper/Cutter

10-20 AWG selection dial adjusts for stripping wire of varying gauges.

Make IRWIN Part of Your Total Worksite Solution

The IRWIN VISE-GRIP brand is legendary. Professional tradesmen have trusted the strength and durability of VISE-GRIP pliers since 1924. With proven performance in every turn, these are the tools that tradesmen choose first – and pass on to the next generation.

Anti-pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue. VISE-GRIP offers a full line of pliers, wrenches, wire strippers, and more. IRWIN VISE-GRIP products continue to set the standard for dependability, quality, and innovation. ..today and tomorrow. Wherever there’s a need for a quality tool, IRWIN VISE-GRIP is on the job.

Product description

IRWIN Tools VISE-GRIP Locking Wrench with Wire Cutter (4US). Curved jaw delivers maximum gripping power and won't slip or strip on any style of nut or bolt. Built-in wire cutter means you don't have to switch tools. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded trigger gives you a quick release while helping prevent accidental release. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use. Backed by the IRWIN lifetime guarantee.

From the Manufacturer

Vise-Grip 7LW Locking Wrench With Wire Cutter measures 7 inches and has a wrench range of 7/16 to 3/4 inches, 16 different standard and metric wrench sizes, locks on to three sides of a hex fastener applying tremendous force without marring or slipping off the fastener. Jaw tips are knurled for better gripping, and tool does include a wire cutter. Built to last a lifetime. Irwin tools are made of only the finest materials, manufactured to exacting tolerances.

• Curved jaw delivers maximum gripping power and won't slip or strip on any style of nut or bolt.
• Built-in wire cutter means you don't have to switch tools. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
• Guarded trigger gives you a quick release while helping prevent accidental release.
• Adjust pressure and work fit with turn screw that stays adjusted for repetitive use.
• Backed by the IRWIN lifetime guarantee.

User questions & answers

Question:	How is this for a rounded off bolt
Answer:	I've had one of these for about 20-25 years. And we've used it on plenty of stripped nuts bolts rusted on and it's about the only thing that will grab hold so you can go ahead and replace the nut and bolt assembly.
Question:	Any chance of this working on a 3/8" fastener? The smaller 4" version seems too short for my purposes
Answer:	Yes it works on 3/8 very well.
Question:	Is this the 4LW
Answer:	Thank you for choosing Irwin Tools. Our goal is to provide our customers with the highest quality and service The IRWIN Tools VISE-GRIP Locking Wrench with Wire Cutter could either be a 4LW or 7LW their are no model numbers to indicate which one the seller is offering.
Question:	Is this made in U.S.A
Answer:	I no longer have the original packaging - however I do not believe this is Made In The USA. My older Irwin Vise-Grips are clearly stamped "Made In USA" - however these newer ones are not. Nonetheless, this is a great product, nothing else works as well for flair nuts.
Question:	Can this work with an exsisting camera
Answer:	Yes it can. I just got one and paired it to my camera that's three and a half years old.Keep in mind this doesn't come with a battery. I felt that was rather lame becaus for $100+ I feel like I should get a new batttery. But, it works great!
Question:	Does the asurian protection plan cover if the screen cracks or other damage causing the picture to be distorted
Answer:	The unit is covered the first year. They will replace the camera or monitor. Whichever is damaged. I got a new monitor when it became damaged but it was within the year and through the company. I’m not sure about asurion protection plan though.
Question:	What are the updates to version
Answer:	I believe they fixed the reception conflicts that were occuring between the unit and mobile phone devices. Once I got the 1.8 version, i did not have the issue again.
Question:	Can i connect 2 monitors to 1 camera? I alteady have the set. I want to add another monitor for grandma to have it in her room
Answer:	Yes you can add another monitor.

Product description

1/4" Plug Cutter, Recommended For Covering Fastener Holes In Furniture, Cabinetry, Floors, Decks & Other Wood Working Projects, Constructed Of Hardened, High Carbon Steel For Added Strength & Durability, Ideal For Making Dowels.

From the Manufacturer

The Irwin Tools 43904- 1/4" Plug Cutter is recommended for making wooden plugs for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects. It is constructed of hardened, high-carbon steel for added strength and durability

• Recommended for covering fastener holes in furniture, cabinetry, floors, decks, and other woodworking projects
• Constructed of hardened, high-carbon steel for added strength and durability
• Ideal for making dowels

Product description

585-53913 features: -left hand spiral flute for gripping power. -Can be used with Flat wrench, adjustable wrench or socket. -Made with high carbon steel. -Drive size: 3/8 in. Number of bits: -1. Dimensions: overall product weight: -7 pounds.

• Made of shock-resistant and heat treated S2 steel for maximum strength and hardness
• Ideal for maintenance and repair work
• Manufactured in United States
• Package dimensions:2.01"L x 1.26"W x 1.01"H

User questions & answers

Question:	Is this socket low profile
Answer:	Do you mean this socket is short ?

Product description

IRWIN Tools IMPACT Performance Series BOLT GRIP Bolt Extractor, 10MM, 3/8-inch Square Drive with 1/4-inch Hex Adapter (1859104). IMPACT performance series bits don't just work with impact drivers. They are designed specifically for them and the higher torque they produce. Reverse spiral flutes grip harder as resistance increases for maximum grip power. Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion and increases life of extractor. Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter. For removing broken, damaged, or rusted nuts, bolts and screws.

From the Manufacturer

IRWIN Tools IMPACT Performance Series BOLT GRIP Bolt Extractor, 10MM, 3/8-inch Square Drive with 1/4-inch Hex Adapter (1859104). IMPACT performance series bits don't just work with impact drivers. They are designed specifically for them and the higher torque they produce. Reverse spiral flutes grip harder as resistance increases for maximum grip power. Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion and increases life of extractor. Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter. For removing broken, damaged, or rusted nuts, bolts, and screws.

• IMPACT performance series bits don't just work with impact drivers. They are designed specifically for them and the higher torque they produce
• Reverse spiral flutes grip harder as resistance increases for maximum grip power
• Constructed of premium high-carbon steel for durability and extended drilling life. Black oxide finish resists corrosion
• Universal lobular design fits all types of fasteners. Square drive fits impact wrenches, or drills and impact drivers when used with included adapter

User questions & answers

Question:	What is the diameter of the hexagonal areas? I'm particularly interested in the diameters of the 9/16" and 17mm extractors. Thanks
Answer:	9/16 Head OAW is 13/16" 17mm OAW is 1"
Question:	I have 10mm round off bolt , is that tool.gona help me
Answer:	This tool worked very well and did the job.
Question:	I have a security lug nut where the keyed part sheard off leaving a round "nut" in a deep welled hole. The round portion is 20.3mm. Would this fit
Answer:	No, #1859128 is 17mm.
Question:	I have a security lug nut where the keyed part sheard off leaving a round "nut" in a deep welled hole. The round portion is 20.3mm. Would this fit
Answer:	No, #1859128 is 17mm.

Product description

This IRWIN BOLT-GRIP Impact Bolt Extractor is built for maximum durability and long life with impact drivers. The high-carbon steel construction helps ensure long bolt extractor life and great durability. The tenacious reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.

• Bolt extractor is built for maximum durability and long life with impact drivers
• High-carbon steel helps ensure long bolt extractor life and great durability
• Universal lobular design fits most types of fasteners
• Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws
• Black oxide finish resists corrosion and increases the life of the bolt extractor

Product description

585-53912 features: -left hand spiral flute for gripping power. -Can be used with Flat wrench, adjustable wrench or socket. -Made with high carbon steel. -Drive size: 3/8 in. Number of bits: -1. Dimensions: overall product weight: -8 pounds.

• Made of shock-resistant and heat treated S2 steel for maximum strength and hardness
• Ideal for maintenance and repair work
• Manufactured in United States
• Included components: tape

Product description

This IRWIN BOLT-GRIP Impact Bolt Extractor is built for maximum durability and long life with impact drivers. The high-carbon steel construction helps ensure long bolt extractor life and great durability. The tenacious reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.

• Bolt extractor is built for maximum durability and long life with impact drivers
• High-carbon steel helps ensure long bolt extractor life and great durability
• Universal lobular design fits most types of fasteners
• Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws
• Black oxide finish resists corrosion and increases the life of the bolt extractor

User questions & answers

Question:	What size is the outside hex diameter if a socket won't fit on the back
Answer:	The outside diameter is 7/8 inches.
Question:	How do you remove the broken nut from inside this extractor socket
Answer:	You could try threading it onto a bolt, place the bolt in a vise, grab socket with channel locks, and wiggle while simultaneously tapping the socket with a hammer.

Product description

ABC

• Durable nickel chromium steel construction
• ProTouch grips provide extra comfort and reduces hand fatigue
• Induction hardened cutting edge stays sharper, longer
• Machined jaws for maximum gripping strength
• Meets or exceeds ANSI specifications

Product description

IRWIN Tools VISE-GRIP Original Locking Wrench with Wire Cutter . Heavy-duty jaws lock on to three sides of a hex fastener, and won't slip or mar the work piece. Built-in wire cutter means you don't have to switch tools. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded trigger gives you a quick release while helping prevent accidental release. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use. Backed by the IRWIN lifetime guarantee.

From the Manufacturer

Vise-Grip Locking Wrench with Wire Cutter, measures 4 inches with a wrench size range of 1/4- to 9/16-inch, locks on to three sides of a hex fastener with tremendous force without marring or slipping off the fastener. Wrench adjusts to over 16 different standard and metric wrench sizes and features jaw tips that are knurled for better gripping. Irwin tools are made of only the finest materials, manufactured to exacting tolerances.

• Heavy-duty jaws lock on to three sides of a hex fastener, and won't slip or mark the work piece.
• Built-in wire cutter means you don't have to switch tools. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
• Guarded trigger gives you a quick release while helping prevent accidental release.
• Adjust pressure and work fit with turn screw that stays adjusted for repetitive use.
• Backed by the IRWIN lifetime guarantee.Length is 4"

User questions & answers

Question:	For an 11mm brake flare nut would this be better then the 7LW? It's close to the max range of the 4LW vs. the min range of the 7LW
Answer:	I think you have the models confused. The 4LW is meant for 1/4" to 9/16", or 6mm - 14mm. The 7LW is meant for 7/16" to 3/4", or 11mm - 19mmI use the 4LW for my 2008 Toyota Tacoma, and the nuts are somewhere around 9 or 10mm

Product description

Features durable nickel chromium steel construction. The ProTouch grips provide extra comfort and reduce hand fatigue. Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer. Designed for cutting a multitude of materials including wire and plastic. IRWIN Tools VISE-GRIP Pliers, Diagonal, 10-inch (1773634)

From the Manufacturer

The Irwin Tools 1773634 VISE-GRIP 10-Inch Diagonal Pliers are designed for cutting a multitude of materials including wire and plastic. The 10-Inch length allows the user the ability to reach into spaces where their hands can't fit to make the cut.. The diagonal cutters are made of drop forged steel for durability and long life. They feature the Irwin dipped grips for comfort, control and reduced hand fatigue. The diagonal cutting pliers come with the Vise-Grip lifetime guarantee.

• Features durable nickel chromium steel construction.
• The ProTouch grips provide extra comfort and reduce hand fatigue.
• Machined jaws provide maximum gripping strength. Induction hardened cutting edge stays sharp longer.
• Designed for cutting a multitude of materials including wire and plastic.