12 best garage floor paints

Product description

A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity. This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline. Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches. KILZ concrete floor paint delivers a satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces. This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Silver Gray with a Satin finish. Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete. 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity.
• This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline.
• Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches.
• KILZ concrete floor paint delivers a satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces.
• This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Silver Gray with a Satin finish.
• Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete.
• 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Greetings, can this product be used inside a residence, living room, kitchen, bathroom and bedroom? The floor is ceramic, you will not have any probl
Answer:	Hi there- thank you for your question. Yes, our 1-Part Epoxy can be used inside a home. It can be used on unglazed ceramic tile. The surface should be sound, clean, dry, and porous. Good luck with your project!
Question:	Anyone apply this to an exterior concrete wall
Answer:	Hello, This garage floor paint is recommended for horizontal surfaces. Floor paints like this one are not as sag resistant as traditional wall paint. If applied to a vertical surfaces, this product may sag or run causing drips.
Question:	Would this work on a concrete table top from Pottery barn, It have a light grey stain on it
Answer:	Hi Ed, did it work? I have the Pottery Barn table as well and looking paint it.
Question:	Can I paint half the garage floor and do the other half a week later as long as I keep the paint in a sealed container between uses
Answer:	Hi Rob, Yes, you can paint the other half of your garage at a later date. KILZ 1-Part Epoxy Garage Floor Paint doesn't have the strict fixed working time restrictions of 2-Part Epoxy products. Best of luck with your project.

Product features

Give Your Garage a New Look

This high-performance, ready-to-use formula resists hot tire pick-up, scuffing, fading, cracking, peeling and blistering. Resistant to household chemicals like oil and gasoline.

Proper Surface Prep is Key

For proper penetration and adhesion of topcoat, use a concrete and masonry cleaner prior to applying this product. Apply in two thin coats, being careful not to over apply.

Great for Driveways, Decks & Basements Too

For use on horizontal surfaces including garage floors, driveways, basements, porches and pool decks. Not formulated for vertical application or industrial use.

Product description

Rust-Oleum EPOXYSHIELD Garage Floor Coating Kit is a durable floor finishing solution that easily covers surfaces in one coat. EPOXYSHIELD works on interior concrete surfaces including garages, workshops, basements and more. Resists hot tire pick-up, cracking and peeling while protecting against stains from gasoline, antifreeze, motor oil and other chemicals. Following application, surface is ready for foot traffic in 24 hours and vehicle traffic after 3 days.

From the Manufacturer

Rust-Oleum EPOXYSHIELD Garage Floor Coating creates showroom-quality surfaces. Protects against gasoline, antifreeze, motor oil, salt and hot tire pick-up. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

• Durable, 2-part epoxy formula works on interior concrete surfaces such as garage floors, workshops, basements and more
• Professional looking finish is easy to clean and provides long lasting protection against stains and chemicals.Indoor use only
• Walk on ready in 24 hours, vehicle and drive-on ready in 72 hours ; 5X stronger than 1-part floor paint
• Super adhesion on surfaces and coverage up to 500 sq ft
• Semi-gloss finish provides a subtle shine on surfaces(refer user manual for better finish and additives required)

User questions & answers

Question:	Can I use this on a front porch that is concrete but previously painted? The existing paint is perling
Answer:	You mean peeling,no this product is for garage floors out of the sun, you’re going to have to scrape off all the loose paint, clean it real good and then they have exterior concrete primers for that you’re going to need and then the best patio paint they have two coats of the paint.
Question:	Do i need to buy concrere etch separately
Answer:	Acid etch is included in the kit. If your garage floor has oil stains, make sure you buy some degreaser and use it prior to etching.
Question:	Has anyone applied this paint over a cement garage floor with a sealer coating without doing all the recommended acid treatment. How did it turnout
Answer:	Not well. My contractor said he didn't need to do anything but scrub. But I did an acid wash the day prior, though probably not a perfect job. I stayed off for a week. Still peeled off where the tires sat.
Question:	Is this floor slick when it is dry
Answer:	It can be if it's not relatively clean. I've accidentally let some WD40 overspray get on the floor, and then later almost slipped and fell on my head! So - yes, certain spills can make it slippery. HOWEVER - it is NOT slippery if the surface is dry and relatively clean. Heck, WD40 or oil spills can make anything slippery. Just use your head and don't land on it! This coating is awesome - mine has been perfect for about 13 years now.

Product features

Rust-Oleum EpoxyShield Garage Floor Kit

Rust-Oleum EpoxyShield Garage Floor Kit transforms your dull garage or other concrete floor into a glossy, showroom-quality finish. Durable epoxy paint coating applies in one coat and lasts for years.

Painting Concrete with EpoxyShield

Allow new concrete to cure a minimum of 28 days.

Apply when temperature range is 60 to 85 degrees.

Wait 24 hours after coating for light foot traffic.

Wait 3 days after coating for vehicle traffic.

Conduct a moisture test before applying coating

Apply 2x2 sheet of plastic to concrete taping edges down. Wait 72 hours and check for water droplets or evidence of moisture. Wait 72 hours and test again. If moisture is present, use RockSolid Moisture Stop before floor application.

Mix Part A & B for 3 minutes, and apply within 1-2 hours of mixing

Always read instructions completely before starting any application.

Before

Garage Floor & Garage Concrete.

After

Garage Floor & Garage Concrete.

Durable Protection

No Hot Tire Pickup.

Concrete Transformed

Basement Floor & Basement Concrete.

Product description

Rust-Oleum 251965 Garage Floor Kit, Gray

From the Manufacturer

Rust-Oleum Epoxy Shield Garage Floor Coating creates showroom-quality surfaces. Protects against gasoline, antifreeze, motor oil, salt and hot tire pick-up. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

• Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more
• Professional looking finish is easy to clean and provides long lasting protection stains and other chemicals
• Walk on ready in 24 hours, vehicle and drive-on ready in 72 hours
• Superior adhesion on surfaces and covers up to 250 sq ft with no hot tire pickup
• Low odor, low VOC gloss finish provides a show room shine on surfaces
• Recommended for indoor use only
• Cleans up easily with soap and water

User questions & answers

Question:	Has anyone tried to paint just the tire peeling area where Rust Oleum Epoxy shield has chipped away from the tire heat, using just a basic concrete paint
Answer:	It won't work. Just like the epoxy. .. The surface needs a deep etching before painting. Otherwise it will just peel off. Plus the epoxy is stronger than the paint. So putting a weaker product in a high wear area will fail even faster. The solution is using the high mileage epoxy clear coat over the standard epoxy. Then it won't peel under the tires
Question:	I have a work shop with a wood floor, would this stuff work using it on wood floor
Answer:	I used it in my brand new 10x12 wood shed with wood floor. Worked great! Strengthened the CDX plywood. I park two motorcycles in the shed and so far have no issues in the two months since I put it down. I stirred in the grit and spread the paint chips. Put a layer on a wood shelf and work bench. Very happy.
Question:	Can extra chips be added to this to give it a "granite" look
Answer:	I added more chips but didn't give a granite look but still looked nice. Just need to do the clear coat on top when you use more chip, that locks all the chips in.
Question:	is this enought for 2 car garage
Answer:	No. I had very little left over after doing my one car garage. Also, i would look to another product, as this stuff is garbage.

Product features

Rust-Oleum 251965 Garage Floor Kit, Gray

Brighten your garage with a clean, glossy, showroom-quality floor that is 5 times stronger. Rust-Oleum EPOXYSHIELD Garage Floor Coating Kit applies in one easy coat and protects against gasoline, antifreeze, motor oil, salt, hot tire pick-up and cracking—for years to come.

FOR BEST RESULTS

Top coat with Premium Clear Coating for ultra protection and a high-gloss finish.

Product description

Rust-Oleum EPOXYSHIELD Garage Floor Coating creates showroom-quality surfaces. Protects against gasoline, antifreeze, motor oil, salt and hot tire pick-up. Kit includes 2-part water-based epoxy coating, concentrated cleaner, decorative chips, stir stick, detailed instructions and an instructional video.

• Water and chemical resistant; long lasting results
• No hot tire pick-up
• No peel promise
• Water-based for low odor
• Finish up to 500 Square Feet or a 2-1/2 car garage for complete coverage

User questions & answers

Question:	My basement floor has some 1/2" cracks that are filled with self leveling caulk. Do I just paint over them
Answer:	In general, wood that has been treated with pre-stain will absorb the stain more uniformly. More porous areas of the wood surface will absorb less stain and, overall, the stained wood may look lighter in color. However, the benefit is that the overall grain pattern of the wood will remain more visually apparent and overly-dark areas (splotchy areas) will be avoided. If you want a darker color after staining the wood once, wait 24 hours (this wait is important) and apply the stain a second time, following the instructions on how long to wait before wiping-off any excess stain.
Question:	what is the voc content
Answer:	No it will not.
Question:	I put an epoxy paint on my garage floor about 20 years ago with no pealing. Can I apply this over the old epoxy paint without problems
Answer:	No brush streaks after wiping.
Question:	Is this the kit with the pouches or actual paint cans? Ive been told the pouches don’t yield as much paint
Answer:	No, oil based stains......

Product features

Rust-Oleum EpoxyShield Garage Floor Kit

Rust-Oleum EpoxyShield Garage Floor Kit transforms your dull garage or other concrete floor into a glossy, showroom-quality finish. Durable epoxy paint coating applies in one coat and lasts for years.

Painting Concrete with EpoxyShield

Allow new concrete to cure a minimum of 28 days.

Apply when temperature range is 60 to 85 degrees.

Wait 24 hours after coating for light foot traffic.

Wait 3 days after coating for vehicle traffic.

Conduct a moisture test before applying coating

Apply 2x2 sheet of plastic to concrete taping edges down. Wait 72 hours and check for water droplets or evidence of moisture. Wait 72 hours and test again. If moisture is present, use RockSolid Moisture Stop before floor application.

Mix Part A & B for 3 minutes, and apply within 1-2 hours of mixing

Always read instructions completely before starting any application.

Before

Garage Floor & Garage Concrete.

After

Garage Floor & Garage Concrete.

Durable Protection

No Hot Tire Pickup.

Concrete Transformed

Basement Floor & Basement Concrete.

Product description

Rust-Oleum rocksolid polycuramine 2.5 car garage floor kit offers unsurpassed durability. Resists salt, oil, gas and other harsh chemicals, this is one of the toughest floor coatings available. Works great on workshop floors, garage floors and other interior concrete surfaces. Zero VOC's and a low odor make it a great choice for indoor applications. Easy to maintain, lasts a lifetime while still looking fantastic. Offers quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique eco-friendly burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 500 sq. Ft. Depending upon surface porosity. No hot tire pickup
• Provides a terrazzo flooring look in a high-gloss finish that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Hello. i have a different color of the same product already applied 2 years ago. can i apply the same product but a different color right in top of it
Answer:	Definitely not, you should remove the caulk completely then using a hand held sander go over the areas were the caulk was, then using hydraulic cement fill in the cracks and with a trowel smooth them over. If the floor was never etched etch the entire area to be finished, before you use the hydraulic cement.
Question:	Can i use this over the rustoleum epoxy shield i put down 8 years ago
Answer:	Unknown about the CONTENT. . simply follow the directions. . .use some common sense and plenty of ventilation.
Question:	Can this go directly over a painted garage floor after i use the "cleaner/etcher" from rust-oleum
Answer:	check out this link and yes it would be best if you rent a floor sander with a Medium Grit do the whole floor lightly, this will insure proper adhesion, if you notice any of the previous finish breaking,popping up use a scraper and then sand feathering it to the old finish then use a suitable rusto-oelum primer specifically for use with this product. If you can give me you Zip Code perhaps I can lower the price if the shipping is much less then anticipated. https://www.rustoleum.com/homeowner/faqs/epoxyshield-garage-floor-coating-faqs/?page=2
Question:	Minimum temperature of aplication
Answer:	I've done 2 garage floors, 4 years apart. First time it came with cans you had to mix but the one I did this year came with pouches. Pouches worked better, press hard and center divider opens and then knead until it is mixed. Cut off a corner and pour into the paint tray.

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Epoxy Shield Battleship Gray Base Single Part 1 Gallon Armor Concrete Floor Paint. Features advanced acrylic technology. Has both interior and exterior durability. Easy soap and water clean up. Hot tire and chemical resistant. Check MOL Restricted Items Report To Verify Restrictions For Your Location. EPA Restricted - Cannot be sold to California.

From the Manufacturer

Epoxy Shield Battleship Gray Base Single Part 1 Gallon Armor Concrete Floor Paint. Features advanced acrylic technology. Has both interior and exterior durability. Easy soap and water clean up. Hot tire and chemical resistant. Check MOL Restricted Items Report To Verify Restrictions For Your Location. EPA Restricted - Cannot be sold to California.

• Size: 1 Gallon
• Battleship Gray Satin
• Advanced acrylic formula
• Indoor/Outdoor use
• UV and weather resistant
• Epoxy Shield Battleship Gray Base Single Part 1 Gallon Armor Concrete Floor Paint
• Features advanced acrylic technology

User questions & answers

Question:	Can I use this on wood steps? Used on my concrete floor and want the steps to match
Answer:	Ask Rustoleum directly. I don't think you can apply this over another coating. You may need to sand it first.
Question:	How long to wait for floor paint to dry before applying a clear coat
Answer:	I would think so but as expensive as this is and the work to fix it if it went south. I would definitely call Rustoleum and get their answer.
Question:	Description says battleship gray, but the image days 'armor' which is it
Answer:	If the paint on the floor is a water based paint you can. If a solvent based paint you need a bonded base primer for the first coat.
Question:	Is this thick enough to also paint the concrete block around my garage floor
Answer:	You can apply it at any temp as long as it is not below freezing, it will effect cure time

Product description

Rust-Oleum Rock-solid Pearlescent Floor Coating Kit creates the ultimate shiny floor with the look of high end quartz or granite in your garage or interior living spaces. Revolutionary formula provides excellent hardness, adhesion and durability for a long lasting finish with superior chemical resistance. Zero VOC and low odor coating allows for an environmental safe transformation with a no peel guarantee and no hot tire pickup.

• Durable, concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 250 sq. ft. depending upon surface porosity; clean up with mineral spirits
• Extreme high-gloss finish offers a pearlescent shine that resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Can you mix bags together to get a consistent color
Answer:	I didn’t try that 1 bad at a time
Question:	Can you mix to pearlescent colors to get a swirl effect? Use one as a base then the other as an accent color
Answer:	Yes
Question:	Will this material stick to wood? I’m wanting to use this on top of plywood for a countertop
Answer:	Yes
Question:	Is this suitable for refinishing cement countertop
Answer:	It’s not food safe.

Product features

Rust-Oleum 306325 Rock-Solid Pearlescent Garage Floor Coating Kit, Pearl Black

RockSolid Pearlescent Floor Coating Kit is designed to create the appearance of high end quartz or granite. This system provides excellent hardness, adhesion and durability on properly prepared concrete. It has excellent resistance to salt, oil, gasoline and other harsh chemicals. This coating contains no VOCs.

• Drive on 24 Hours
• No Hot Tire Pickup
• Chemical Resistant
• Low odor & VOC Free
• No Peel
• Extreme High Gloss
• Kit covers up to 200-250 Sq. Ft.
• Available in 6 Colors
• Optimal application temperature 40˚-90˚F

Product description

Hot Trax Epoxy Fortified Acrylic Concrete and Garage Floor Paint is a high performance, ready to use acrylic garage floor epoxy coating that resists hot tire pick-up and marring common to driveways and concrete garage floors. This epoxy paint seals and protects your surface from chemicals, water, oil and grease. Whether you already have a painted epoxy concrete floor in need of a fresh coat, or are putting down your first epoxy garage floor coating Hot Trax is ideal. Hot Trax is also intended for exterior concrete, masonry, stucco, cinder block and brick. This durable low satin finish product can be walked on in 24 hours and vehicles can be parked on Hot Trax in 5–7 days. This epoxy garage floor paint can also be used for interior and exterior use on concrete floors, basement floors, garage floors, driveways, walkways, patios and pavers. Also can be used on masonry, stucco, block and brick.

• High-performance, epoxy-fortified acrylic concrete garage floor paint that resists hot tire pick-up and marring common to driveways and garage floors.
• Seal, paint and protect garage floors from concrete from chemicals, water, oil, and grease.
• Durable 1 part epoxy fortified garage floor paint, low-satin finish resists cracking and can be recoated in 24 hours.
• Low VOC formula that seals and protects from chemicals, water, oil & grease.
• Park vehicles in 5-7 days.
• 300 - 400 square foot coverage per gallon.
• Apply when surface or air temperature is above 50 °F (10 °C).
• Before painting, review the INSL-X Hot Trax label for proper preparation and application tips.

User questions & answers

Question:	Is the finish slippery
Answer:	Two gallons come with this purchase. One gallon epoxy paint + one gallon catalysis. I have not actually applied this to my garage floor because I'm not finished with walls and ceiling, but it looks straight forward. UPS delivered it free. Randal
Question:	Is one coat enough for a garage floor
Answer:	I would think so
Question:	Can I use it on wood
Answer:	It literally says in the description to wait 28 days or you can listen to Alex and screw it up.
Question:	Garage floor: will hot trax this stop dampness from underground making floor damp which creates moisture and mold in garage
Answer:	yes
Question:	how much paint comes in this kit
Answer:	Yes, definitely can! I used it for my basement wood steps and it worked great.
Question:	Would this work on a wood floor as well
Answer:	Wasn't long for me. Maybe a couple hours. Definitely recommend using the decorative chips too if you're doing a garage.
Question:	how mych time does new concrete need to cure before application of this product
Answer:	It's Battleship Gray which drys down to a light-blue. Looks Good.
Question:	Is this mixed at a 1 to 1 ratio
Answer:	YES

Product features

EpoxyShield Professional Garage Floor Kit

Rust-Oleum EpoxyShield Professional Garage Floor Kit beautifies and protects any garage or other concrete surface by providing excellent resistance to scratches, wear, chemicals and more. Solvent based formula offers maximum durability for environments such as workshops, garages and warehouses. Applies in one coat for faster projects. Semi gloss finish creates a showroom look while unique epoxy formula provides incredible quality.. Two-part epoxy base formula seals, paints and coats protecting concrete floors and garage floor surfaces. Custom certified packaging ensures safe shipping through online purchase.

Prepare Surface

• Covers 150-200 sq ft per kit
• Sprinkle water on concrete to test for sealer
• Beading water means sealer exists
• Remove sealer if present
• Use degreaser to clean oil & dirt, rinse
• Etch surface with stiff brush
• Etch is critical step for proper adhesion
• Rinse & dry thoroughly

Mix Components

• Extinguish open flames and pilot lights in area before mixing & application
• Keep open flames and pilot lights extinguished for at least 24 hours following application
• To properly mix Parts A & B
• Pour Part B Base into 5 gallon pail,
• Pour Part A into pail
• Mix 2-5 minutes

Apply Coating & Decorative Chips

• Allow the coating to stand for 30 minutes
• Mix again prior to application
• Cut in floor perimeter with brush
• Apply in 4' x 4' sections with roller
• Apply decorative chips to wet paint
• Throw chips underhanded up and away immediately following each 4' x 4' section

Painting Concrete with EpoxyShield

• Cure new concrete at least 28 days
• Apply between 55-90°F
• Light foot traffic after 24 hours
• Wait 4 days for vehicle traffic
• Maintain wet edge during application
• Clean drips at once with mineral spirits
• Working time 2 hours @ 70-80°F
• Do not mix color chips into coating
• Review instructions thoroughly before beginning project

Protects Against

• Gasoline/Antifreeze/Motor Oil/ Salt
• Cracking/Peeling/Hot Tire Pick-Up

INSL-X DIY Tip

Garage floor paint and flakes should be applied in sections.

INSL-X DIY Tip

Gently toss the flakes up and let them drift down to the wet paint.

INSL-X DIY Tip

Distribute more or less flakes to achieve desired look.

Product description

Rust-Oleum RockSolid Metallic Garage Floor Coating Kit is made from a unique polycuramine formula that provides a tough, ultra hard coating on properly prepared interior concrete floors including garages, basements, workshops and any other interior concrete within the home. Resistant to salt, oil, gas and other harsh chemicals, this coating bonds to concrete and provides a unique, shimmery high-gloss finish on floors. Strong enough to hold up in the most demanding, high use areas yet the ultra low odor and low VOC make it safe to use on any interior space. Provides quick return to use with ability to walk on in 8-10 hours and drive on in 24 hours.

• Durable, polycuramine concrete coating works on interior concrete surfaces including garage floors, workshops, basements, family rooms and more
• Self-leveling, buildable formula is 20X stronger than epoxy, comes in a unique burst pouch and is virtually VOC and odor free
• Complete projects quickly; coating is walk on ready in 8-10 hours and vehicle ready within 24 hours
• Each kit covers up to 125 sq. ft. depending upon surface porosity; clean up with mineral spirits. For best results-Install between 40˚-90˚F
• Extreme high-gloss finish in a shimmery metallic color resists cracking, peeling, chemical spills, hot tire pick up and provides a showroom quality floor in 1-coat that lasts

User questions & answers

Question:	Can this be used outside? Pool deck
Answer:	No, it says do not use in direct sunlight
Question:	What is the warranty in this
Answer:	Don't think there is any. I had to touch up a few chips after two years.
Question:	Is it possible to do a 2 pour application
Answer:	Yes it is possible, you will need to do the second application within 24 hours or wait 3 days to do it. Hope this helps.
Question:	what do you use for application
Answer:	Make sure you buy a quality roller; the supplied roller disintegrated during your first application.

Product features

Rust-Oleum RockSolid Garage Floor Coating

Revolutionary industrial grade polycuramine formula

Drive On in 24 hours

Low odor, VOC free solution cures quickly

No Hot Tire Pickup

Rock hard coating resists salt, oil, gas and other harsh chemicals

Prepare Surface

Scrub & etch heavily soiled areas with concrete etch. Rinse & dry thoroughly before application.

Burst, Shake, Pour

Combine each easy mix burst pouch separately and shake to create perfect self leveling coating.

Apply Coating

Apply in 4' x 4' sections with included roller and broadcast decorative chips over fresh wet coats.

One Coat System with Extreme Durability

Roll side A toward side B to burst and mix the two components. Each pouch is designed to apply individually for best pot life.

Ultimate Surface Protection

Apply on garages, basements, workshops, laundry rooms, mud rooms and more on concrete, wood, drywall or tile surfaces.

Product description

Rust-Oleum Decorative Color Chips offer ultimate personalization to concrete floor coatings in a variety of colors and blends. Mix and match any combination of color chips with any one-part or two-part concrete floor coating during application. Apply in 4' x 4' sections over wet paint in a standard chip or heavy chip pattern depending on desired coverage. For a high gloss, showroom quality finish, topcoat garage floors with EpoxyShield Premium Series Clear Finish or RockSolid Clear Topcoat.

• Customize any concrete coating with decorative color for the perfect finish
• Universal chips designed for use with one-part or two-part concrete floor coatings
• Mix and match chip blends for a personalized look and color scheme
• Helps hide surface imperfections and dirt for a premium, showroom finish
• Sprinkle onto wet paint during application for a permanent bond

User questions & answers

Question:	Can this be used with a clear coat finish
Answer:	As long as you apply the chips before the clear coat, I don't see why not.
Question:	I have a garage that is 400 square feet. How much do I need
Answer:	Depends on how much flake appearance you want? I like a lot of flake personally. I bought two lbs on top of what comes with the three floor kits. I ended up using only two kits worth of epoxy, and all five bags of flakes on a 900+sqft garage.
Question:	Can you use the Rustoleum Anti-Skid along with these
Answer:	I used the anti-skid after the chips and it did great. I didn't mix the anti-skid in the paint as suggested, I put it on top with the chips and it works great,
Question:	I have a counter top pait set that I'm going to be using to paint my bathrooms. Could I mix this in with that to add some sparkle to my counter tops
Answer:	Yea you can use it with about anything try it on a small piece see if you like it.. I just used in in my garage floor

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Can this work on a ceramic tile on the floor
Answer:	Hello, In short, yes. The floor will need to be cleaned and etched for this to stick properly to ceramic tile. Apply in thin coats.
Question:	would this be slippery on a concrete steps
Answer:	I have this paint on my patio, which is concrete. I have not had any problems with slippage even when its wet. Hope this helps.
Question:	Does this paint come in different colors
Answer:	Hi there, This product is available in Silver Gray (light gray) and Slate Gray (medium gray).
Question:	What is the Temperature range for application
Answer:	Hello, For best results, apply at temperatures between 50°F - 90°F. Temperatures above 90°F may affect the application such as drying too fast. Avoid painting in direct sun. NOTE: If the surface is hot to the touch it should be considered too hot to apply this coating.

Product features

KILZ Porch & Patio Floor Paint

KILZ Porch and Patio Floor Paint is a 100% acrylic latex product providing a durable, long-lasting finish that is ideal for both interior and exterior applications. This product will create a mildew resistant finish that resists scuffing, fading, cracking and peeling. Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises.

Product description

Freshen up your concrete floors with Rust-Oleum EPOXYSHIELD Concrete Floor Paint. This self-priming acrylic paint requires only one coat and resists fading, chipping and stains, even when exposed to sunlight, weather, hot tires or chemicals.

From the Manufacturer

Epoxy Shield Gallon Gray Base Single Part 1 Gallon Armor Concrete Floor Paint. Features advanced acrylic technology. Has both interior and exterior durability. Easy soap and water clean up. Hot tire and chemical resistant. Check MOL Restricted Items Report To Verify Restrictions For Your Location.

• The product is Gallon GRY Conc FLR Kit
• Elegant design and Smooth finish
• The product is manufactured in United States
• Epoxy Shield Gallon Gray Base Single Part 1 Gallon Armor Concrete Floor Paint
• Features advanced acrylic technology
• Has both interior and exterior durability
• Easy soap and water clean up

User questions & answers

Question:	What percent of solids have
Answer:	Thank you for reaching out! Insl-X Hot Trax is a satin finish. If wet, it will be slippery. Please reach out to us at inslx. reivews @ gmail. com, if you have any additional questions.
Question:	will it work on a fiberglass boat floor
Answer:	Hi, thanks for your question. Apply a thin even coat using 3/8” nap roller cover or a nylon/polyester brush. Allow the first coat to dry 24 hours before applying a second coat. Apply the second coat in a cross direction of the first coat to achieve uniform coverage. Always apply two finish coats for proper performance.
Question:	How thick of coverage does this provide
Answer:	Thanks for the question! Hot Trax is recommended for interior and exterior use on concrete floors, basement floors, garage floors, driveways, walkways, patios and pavers. Also can be used on masonry, stucco, block and brick. Please refer to the Technical Data Sheet on the Insl-x website for more information regarding specific substrates.
Question:	This rustoleum product for 1 gallon is only the base? So you need to purchase the hardener separate? Or is this premixed
Answer:	Hydrostatic pressure, which is what you are experiencing in your garage, is not something that can be stopped by any coating. Eventually, enough pressure will build up and cause dampness on the floor or push the coating away from the concrete. If using any coating, it must be understood that it will fail in a much shorter time if you have high levels of hydrostatic pressure.