9 best triplett multimeters

• 18 ranges and functions including AC/DC Voltage to 1200V, DC Current to 0.6A, and Resistance to 20MOhms
• Drop resistant, high impact case and fused resistance ranges
• Diode Overload Protection against damage to the meter movements caused by accidental overloads
• Single selector switch allows you to switch easily from range to range and function to function
• Compact voltmeter with three defined, easy-to-read scale areas

User questions & answers

Question:	My Triplet meter is great however, the Eveready 504 15 volt battery needs replacing. Does anybody know where to get a replacement. Eveready no longer makes them and I have had no luck in finding a replacement. There is a company who is selling a battery named "Exell 220 15Volt". I ordered one however it was DOA. I call
Answer:	Yes, the preset program will retain its memory after a power failure.
Question:	where can the 1/16th Amp fuse be located for sale
Answer:	You need to allow for wiring distance loss and or maybe a short in wiring.
Question:	How can you tell which meter has the 12volt vs. 15 volt battery? the specifications don't say
Answer:	Yes any 12V bulbs halogen or LED
Question:	does this meter ave amp readings or an attachment for amp reading
Answer:	I installed a cover over the outlet to provide protection from rain. These are available at hardware stores.

• True RMS digital multimeter with 28 ranges including AC/DC Current, AC/DC Voltage, Resistance, Temperature, Capacitance, Continuity, Diode Test and NCV Detector
• 3-3/4 digit, 6000 count backlit display for use in all conditions
• AC/DC Current measurements up to 1000A
• CAT III 600V design provides superior resistance to damage from transient over-voltages in any demanding industrial setting
• Includes test leads, Type K Temperature probe, 9V battery, and case

User questions & answers

Question:	Looks nice, just ordered one. Wondering why no carry bag though
Answer:	The photo cell will click the timer on when its dark and the lights goes on and will shutt off after the number of hours you chose.
Question:	does this clamp measure DC Amps
Answer:	ITS A TIMER FOR OUTDOOR HAVE TO READ THE PAPER WORK ITS DIFFERENT ITS SET FOR HOURS I HAD TO GET A BIGGER ONE IT WORKS WELL ONCE YOU FIGURE OUT CONNIE
Question:	When crossing probe tips on continuity it rarely functions. Ohms range works fine shows leads ok when crossed
Answer:	I don't know. I have mine set to come on at sundown and back on at sunrise. Not familiar with a smart plug.
Question:	Does this have a peak hold function
Answer:	I purchased this item and returned the first and a second one that was sent as a replacement. Both were defective but in regards to your question, yes it could handle your requirements. Your light set requires a total of 72 watts whereas the transformer has a 120 watt capability.

• 19 ranges including AC/DC Voltage to 600V, DC Current to 10A, Type K Temperature and Transistor hFE Test
• 3-1/2 digit, 1999 count backlit display
• Diode and continuity tests
• Rubberized boot provides impact and drop resistance in a sleek ergonomic design; Auto Power Off helps maximizes battery life
• Includes test leads with alligator clips, Type K bead probe and 9V battery

User questions & answers

Question:	The product manual shows resolution of10ua ( micro amps ) on dc current setting of 20ma (milli amps) what does the resolution mean
Answer:	The Kichler Lighting 300W Pro Series Landscape 12V Transformer 15PR300SS is made in China.
Question:	Does not have auto range. Is that not important? Thanks
Answer:	Yup. 600 Watts will allow for longer runs and more lights. Of course LED voltage of lights is a factor. Try to use 12 gauge wire if possible.
Question:	Will it measure temperture in Celsius
Answer:	Toroidal core works fine with LEDs. It's probably electronic transformers you're thinking of, not Toroidal. Some electronic transformers will cause lower quality LEDs to flicker.
Question:	will it measure dc current up to 10 amps, which I need for my solar panels. Thank you
Answer:	You would do best to use Kichlers retrofit bulbs. If that is what you are using then I would use a smaller transformer.

• 42" test leads for digital multimeters
• Includes mini-banana jacks and insulated screw-on alligator clips
• Designed for the Triplett 310 series
• Color-coded wire for easy identification

User questions & answers

Question:	Do these leads use silicon or plastic covered wire? i'm looking for silicon only as i measure hv at times
Answer:	I don’t know but it is well made and so far I am very happy with the product.
Question:	will these work on triplett model 2202 meter
Answer:	I did a review of this product. This Transformer replaced an Alliance it300 transformer which wanted to but never liked. the Alliance needed a cell phone to turn on and program. Which became a problem with phone capability. and it would turn on in the middle of the day. The Alliance was over complicated, more expensive, noisy and gets hot. By comparison, this transformer was very easy to install and operate. There are reviews about trouble fitting multiple wires in the taps. The Alliance did have a Common for each tap but the alliance had only 14v taps. This one has 12 13 14 and 15 which is handy but they all share a single common attach point. My setup only needed two taps. i used the 12v and 13v and the heavy gauge stranded aluminum wire had no problem doubling up in the common tap. I think you could maybe do 3, maybe, but I had no issue with two at all. it was simple to set up, had a photo cell which the Alliance did not. it's absolutely quiet and does not get as hot. i am very pleased with this purchase and price.
Question:	Will these leads fit a Triplett 666R
Answer:	Hi. Had mine 3 months.....same sit.....no issues (rain, snow)......
Question:	I have a Triplett model 630 and need leads. How do i know if it is a Type
Answer:	Check the photoeye, it may have debris interfering with it. Check your connection or for broken wire.

• The Triplett Model 9007-A is a 3-1/2 digit (2000 count) manual ranging high performance digital multimeter with a large backlit LCD display. It measures AC/DC Voltage, AC/DC Current, Resistance, Temperature, Frequency, Capacitance, Continuity, and Diode Test. The rubberized overmolded housing provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Power Off feature helps maximizes battery life. CAT III 600V safety rating. Complete with test leads, alligator clips, Type K temperature probe, and 9V battery. 3 year warranty.
• 31 measurement ranges, 3 ½ digit resolution with large 1.4” backlit display
• AC/DC Voltage to 600V and AC/DC Current to 10A
• Temperature, Frequency and Capacitance measurement. CAT III 600V, Data Hold, Auto power off, and Low battery indicator
• Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself on developing innovative, reliable, and durable test equipment that also won't break the bank. Triplett’s catalog contains a wide array of test equipment parts and accessories such as multimeters, voltmeters, cable testers, security cameras and security camera accessories, wire cable mapping kits, video monitors, and other specialty testers. We serve industries such as HVAC, security, electronics and electrical, telecom, and more.

• Universal fit for virtually any standard or compact multimeter or clamp-on meter with test leads
• Durable "Cordura" exterior to survive any jobsite
• Soft, padded interior protects your tester
• Large belt loop with snaps
• Secure zipper closure keeps your gear in place

• 28 ranges including AC/DC Voltage to 600V, DC Current to 0.12A and a Decibel function for audio work
• Designed to make fast, accurate measurements on all types of electrical and electronic equipment
• Glass meter window for added chemical resistance and a mirrored scale to reduce parallax error
• All ranges are fuse protected
• Includes test leads with alligator clips and batteries (1.5V and 30V)

User questions & answers

Question:	Where to buy replacement batteries
Answer:	As long as the lights are 12V there is no polarity and it doesn't matter which goes where
Question:	Is this product made in USA or China
Answer:	18" above ground
Question:	Does the 630 have standard (non-inverted, non-proprietary) 4mm banana jacks
Answer:	With a screw terminal.

Product description

BONUS: Add B07WQ21YMY to cart and enter code DWU9IJAQ, recieve 10pcs test leads with alligator clips for only 5.38.

Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

• Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
• Display: True RMS, 6000 counts, 3 5/6 digits
• Overload Display: Display OL
• DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
• DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
• AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
• Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
• Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
• Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple

• WIDE APPLICATIONS - KAIWEETS digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC voltage, AC/DC current(DC is the default), resistance, continuity, frequency, capacitance and diode, liquid temperature, wire on-off, Battery checking. This advanced tester can diagnose automotive, industrial and household electrical issue.
• EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging.
• SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage
• AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Will we be able to add a bluetooth upgrade to our meters since it indicates an updated meter will have it and it also has the symbol
Answer:	Yes
Question:	How long is the warranty
Answer:	No not good driving gloves
Question:	Just wondering if you ship this item to Australia
Answer:	I used these gloves and my hands did not get wet.
Question:	where can i buy replacement fuses? I love this meter but blew the fuse
Answer:	You can make a fist and I've used them for general cold weather yard work, but the gloves take away fine motor skills. Gripping a hammer would likely not be a problem. Holding a nail might be slightly more difficult.

Product features

Kaiweets HT118A Digital Multimeter

An advanced multimeter designed to be used safely and accurately by electricians at work places or homeowner and DIYer who need more capabilities than the standard measuring tool.

* Light up the terminals: LED indication light as input terminal guidance

* CAT III 1000V, CAT 600V safety rating

* Double insulation, robust outer case

* Includes test leads, K-Type thermocouple, batteries and user manual

Sensitive Continuity Test

Loud buzzing sound

Resistance < 30Ω, green light

Resistance between 30Ω to 60Ω, red light

2.7 inch Display

Display turns to orange when voltage is over 80V.

Large, clear digits

bar graph

Low battery indicator

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Maximum Safety

Dual fuse

Dual PTC thermistor

Intelligient Anti-Burn

Overload protection on all ranges.

• 【100% Safety Assurance】Built-in Double Fuse. Overload Protection on all ranges.
• 【Auto-ranging Tester】Accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, etc.
• 【Backlight Display】 Designed with 3 1/2 digit LCD display and 'Backlight', showing the reading clearly in low light areas.
• 【Special Points】 Data Hold, Maximum Value Hold, Function Switching, Auto Power OFF. Sampling Speed: 3 times per second.
• 【9V Battery】DON'T forget to install the 9V battery before using the digital multimeter, or it will go on strike.

User questions & answers

Question:	Is the unit truly auto-ranging? i see a "range" button on the unit pictured
Answer:	Yes
Question:	What batteries does it use
Answer:	9v battery. It does come with it. You will have to install.
Question:	For a hobbyist, why would I not buy a $20 multimeter vs something
Answer:	Fora hobbyist the really cheap meters are the best because sooner or later one will test something that will ruin the meter. This meter is really an intermediate meter which is above the hobbyist stage but still below the professional stage. An no, buying a Krug doesn't make you a professional.
Question:	Does continuity test produce a beep
Answer:	Yes. Turn dial to diode setting and press FUNC once. Beep is plenty loud. Great meter for the price.

Product features

Technical Specifications:

1.DC Voltage: *200mV/2V/20V/200V ±(0.5%+2) *600V ±(0.8%+2)

2.AC Voltage: *2V/20V/200V ±(0.9%+3) *600V ±(1.2%+3)

3.DC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+3)

4.AC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+4)

5.Resistance: *200Ω/2kΩ/20kΩ/200kΩ ±(0.8%+2) *2MΩ/20MΩ ±(1.0%+2)

6.Frequency: *20kHz ±(1.5%+5)

7.Power Supply: 9V Battery (6F22 or 1604A Type)

8.Safety Class: IEC 61010-1, CAT II 600V

AC/DC Voltage Test***

Battery Test***

Resistance Test***

Backlight LCD

3 1/2 digit LCD display provides clear display. And 'Backlight' can help show the reading clearly in dark areas and at night.

Data Hold

If you want to record the measurement value, just press the 'Hold' button, then the reading showed on the screen will be locked.

Full Support

Foldable stand for hand free use. ​Just open up the support stand, the multimeter can be propped up stably.

Overload Protection

Built-in Double fuse can protect the multimeter effectively. Overload Protection on all ranges.