8 best deck paint for concrete

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Can this work on a ceramic tile on the floor
Answer:	Hello, In short, yes. The floor will need to be cleaned and etched for this to stick properly to ceramic tile. Apply in thin coats.
Question:	would this be slippery on a concrete steps
Answer:	I have this paint on my patio, which is concrete. I have not had any problems with slippage even when its wet. Hope this helps.
Question:	Does this paint come in different colors
Answer:	Hi there, This product is available in Silver Gray (light gray) and Slate Gray (medium gray).
Question:	What is the Temperature range for application
Answer:	Hello, For best results, apply at temperatures between 50°F - 90°F. Temperatures above 90°F may affect the application such as drying too fast. Avoid painting in direct sun. NOTE: If the surface is hot to the touch it should be considered too hot to apply this coating.

Product features

KILZ Porch & Patio Floor Paint

KILZ Porch and Patio Floor Paint is a 100% acrylic latex product providing a durable, long-lasting finish that is ideal for both interior and exterior applications. This product will create a mildew resistant finish that resists scuffing, fading, cracking and peeling. Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises.

Product description

Sure Step Anti-Slip floor paint provides a durable skid resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance and resistance to ponding water. Sure Step is water reduced which allows for fast dry plus easy application and clean up. Available in 5 ready mixed colors and white. There is also a clear coat to be used as a stand-alone clear finish. Sure Step can be exposed to light foot traffic 24 hours after application of the final coat. Allow 4- 5 days for heavier or continuous foot traffic. Sure Step non slip concrete coating and anti slip floor paint is formulated to be a performance anti slip paint for areas that require extra skid resistance. High-traffic surfaces such as tennis courts, patios, walkways, steps, pool decks and areas.

• Durable, skid resistant finish anti slip paint for interior or exterior application, excellent color retention, abrasion resistance, and resistance to ponding water.
• High traffic slip resistant paint for concrete that’s ideal for stairs, walkways, patios, and more.
• Fast drying, durable, easy application that fills and seals cracks.
• 80 - 120 square foot coverage per gallon.
• On exterior applications, do not apply when rain is threatening. Not for immersion service.
• Before painting, review the INSL-X Sure Step label for proper preparation and application tips.

User questions & answers

Question:	How long will this last around a pool? with heavy sun exposure in florida? i know you can’t give me exact time it will last. an estimate it fine
Answer:	Yes it is
Question:	Can this be used on diving boards
Answer:	For your application, we would suggest a film building clear finish that in intended to "seal" the tile and grout.
Question:	Can this be used on asphalt
Answer:	In regard to your question, I am not certain, since I only used the product on fabric. Because it does work so well on fabric, and the product does mention it works on wood, I would certainly try this product on your outside wicker items.
Question:	How many coats are recommended for a previous stained deck
Answer:	Ask a professional, not sure

Product features

INSL-X DIY Tip

Be sure to allow new concrete to cure for at least 30 days before painting.

INSL-X DIY Tip

Replace any loose or rusting nails before painting.

INSL-X DIY Tip

Bare metal surfaces must be primed prior to painting.

Product description

COOL is a revolutionary and proprietary new coating from Encore that repairs, enhances the look of your concrete pool deck while reducing heat build-up by as much as 38%. Cool can be applied over existing concrete pool deck surfaces, including Kool-Deck. WHAT COMES IN THE BUNDLE? A Cool bundle includes one 3-gallon kit of Cool Pool Deck Coating that covers 150 square feet of deck - depending on your deck condition. When purchased separately, these items sell for considerably more. When purchased in a bundle, you save! LIFETIME WARRANTY & TECHNICAL SUPPORT: Encore (Wood and Concrete Coatings and Cool!) has a lifetime residential warranty and a ten-year commercial warranty. Keep your paperwork from your purchase and if you experience any problems whatsoever, contact us to discuss the solution. We want you to be completely satisfied with your decision to use our product and we understand your concerns. If you would like to read the Warranty for Encore for Wood and Concrete Click Here! If you would like to read the Warranty for Cool! Click Here! NON-TOXIC: We are committed to producing products that are exclusively friendly to the environment and their user. As our Industry migrates towards water-based, VOC-friendly formulas, Encore is helping to to lead the way. Our entire product line is 100% water-based and VOC-friendly – an achievement that forges new opportunities in this new age. NO MOLD OR ALGAE: Simply clean when needed with soap and water. The smooth surface doesn’t allow dirt to stick to it, making cleaning a breeze.

• USED AT THEME PARKS: Our revolutionary pool and deck product is the coating-of-choice for water theme parks, resorts, national landmarks, and now residential swimming pools. We offer commercial functionality to you at an affordable price…because it works!
• COMFORTABLE FEET: If the walk to your pool is more like a sprint, COOL is for you! Our revolutionary coating absorbs the heat and transfers it directly into the soil below to keeping your feet comfortable and your pool area cooler. Our pool deck coating seals your concrete and drops the temperature by up to 38%.
• NO SLIPPERY SURFACES: If a safe pool area is a top priority for you, COOL is the perfect solution for a safe, skid-resistant surface around your swimming pool or hot tub. Meets ADA safety requirements for non-slip surfaces – even when it’s wet!
• REPAIRS CONCRETE & STAYS CLEANER: COOL’s specialized coating bonds with concrete at a molecular level, filling in cracks and permanently sealing them. The smooth, sealed surface makes it difficult for dirt to hide – simply clean the concrete with soap and water. COOL stands up to pressure washing and doesn’t peel or chip. (Note: Apply Encore’s SealBack Nano-Acrylic Sealer for extra protection.)
• EASY TO USE: Just spray the concrete with Triple Crown, then wash away the dirt and debris that Triple Crown lifts from the surface. Let dry completely and apply the COOL treatment. Mix the kit with water and apply COOL with a paint roller. (Note: Add 1 gallon acrylic paint to color the coating to enhance your pool area.) Dry for 30 minutes and apply a second coat of COOL. Apply our SealBack treatment to make everything almost completely permanent.

User questions & answers

Question:	I have old Keystone Kool deck which has some cracks. Can this product be applied like paint over it using a paint roller
Answer:	Hi Alejandro.Yes, Cool is rolled onto your pool deck surface using a 1/2" - 3/4" nap roller cover. It does a good job of filling in the smaller cracks (under 1/8"). For larger cracks, you should fill them with Cool using a paint brush. Apply the coating into the cleaned crack and then feather out the edges so you don't end up with lap marks once it dries. After the patchwork is dry, roll out your two coats and the patch should virtually disappear. Cool applies much like paint does and you'll find that it's a super-friendly product to use. If you have any other questions, you can contact Encore's customer support at 888-776-2242.
Question:	does it stain easily
Answer:	Would not recommend! It stains easily , but it is still hot to the feet!!! Very disappointed, for the price!
Question:	How thickly can the coating be applied. I have a standing water from a poorly laid concrete extension and a feathered thickness of 3/8" would fix it
Answer:	Hi. Thanks for your question. Cool can be applied in multiple coats to correct small issues with standing water. However, when you get to 3/8", you're probably better off with a leveling compound that you can find at your local home improvement center. These compounds are less expensive and do a good job of repairing issues such as yours. Good luck and let us know if we can help you with any other questions!
Question:	Will it adhere to hydraulic cement? I've done some mortar repairs on my brick pool deck using hydraulic cement and want to confirm it'll stick to that
Answer:	Hi. Thanks for your question. Yes, Cool is compatible with hydraulic cement. It will adhere to the patch. However, be aware that if the patch fails, the coating will also fail. Patch failure can come from improper preparation of the surface, improper mixing of the cement patch, the patch not being properly applied, and from environmental impact (water intrusion, impact from heavy objects, etc.) All in all, if you properly prepare and apply the patch, Cool is perfectly suited to overcoat it. Thanks for your interest in our product.

Product description

Over Armor offers an innovative, waterproofing solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin surface. This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete. Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks. Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish. This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon. Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application. Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• Over Armor offers an innovative solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin formula.
• This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete.
• Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks.
• Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish.
• This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon.
• Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application.
• Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	How can i make the gray lighter
Answer:	You can't, without changing its function. Use the Kilz Deck Paint for a lighter gray. You might contact Kilz to see if you can mix the two. I thought about that, but Over Armor is like dry wall mud, while the Deck Paint is like paint.
Question:	Would this be good for a garage floor
Answer:	This is not designed for drivable surfaces.
Question:	Will this work on an outdoor deck that is exterior plywood
Answer:	I painted a porch this past summer with two gallons of the Redwood colored product. The porch was made of exterior plywood. I used up more of the product on filling in some of the knot holes but the traction afterwards was fantastic and the look very consistent. Two coats would have been best! I recommend fully for this application.
Question:	Would this work on a boat floor
Answer:	Hello, This isn't a marine-grade product and therefore has not been tested for this kind of application. We wouldn't recommend using it on a boat because we haven't tested it properly and can't guarantee it would hold up.

Product features

Transforms & Protects

Revives wood and composite decks, porches and boat docks as well as concrete pool decks, patios and sidewalks. Covers up to 75 sq. ft. in two coats. Two coats are required.

Easy to Apply & Clean Up

Spatter resistant application and easy soap and water clean up. Recoat after 4-6 hours. Allow 24-48 hours before foot traffic, 72 hours to full cure.

Resists Cracking & Peeling

Covers splinters and cracks up to 1/4". Provides a durable, mildew-resistant finish once cured. Not for drivable surfaces like driveways and garages.

Surface Prep is a Must

Coated wood and concrete must be cleaned and stripped. Clean uncoated wood and etch uncoated concrete before applying to promote adhesion.

Product description

Breathe new life into your concrete surfaces with KILZ interior/exterior decorative concrete paint formulated for driveways, garage floors, pool decks, patios & porches. Easy to apply concrete paint fills in hairline cracks up to 3 mm and stands up to hot tires, dirt and grease. Slip-resistant surface is ideal for pool decks and walkways. Important: the product must be applied with a 1/4 inch adhesive roller cover. One gallon covers about 50 sq.'. With 2 coats. Durable, protective finish enhances the look of concrete surfaces. Dries to the touch in 1 hour, recoat after 4 hours.

• Breathe new life into your concrete surfaces with KILZ interior/exterior decorative concrete paint formulated for driveways, garage floors, pool decks, patios & porches
• Easy to apply concrete paint fills in hairline cracks up to 3 mm and stands up to hot tires, dirt and grease
• Slip-resistant surface is ideal for pool decks and walkways
• Important: must apply this product with a 1/4 inch adhesive roller cover. One gallon covers about 50 sq.'. With 2 coats. Shake the can before use
• Durable, protective finish enhances the look of concrete surfaces

User questions & answers

Question:	is it slip resistant for a hot, wet, sloping path application in Florida
Answer:	Hi there, thank you for your interest in using our Decorative Concrete Coating. While this product is slip-resistant when dry, it may become slippery when wet; all of our coatings will be. If this is a concern, it may best to look into using something else instead. Best of luck.
Question:	Would this work well on an outdoor brick driveway? The driveway is slopped
Answer:	No. I prepared this as instructed and very neat professional person. All that and the paint peels.
Question:	Does this product have black in the grey texture
Answer:	Hi there, There is a small amount of black to make the color contrast and look like granite.
Question:	Is thos product available in a 5 gallon bucket
Answer:	Yes it is, and It is also expensive

Product features

Give Your Concrete New Life

KILZ Interior/Exterior Slip-Resistant Decorative Concrete Coating is formulated for driveways, garages, pool decks, patios and porches.

Use 1/4" Adhesive Roller

This product must be applied with an 1/4-inch nap adhesive roller cover. Check out KILZ 1000033R Adhesive Roller Cover.

Upgrade Your Driveway

Easy to apply concrete paint fills in hairline cracks and resists not only hot tire pick up but also dirt, grease and other household stains.

Transform Your Pool Deck

Covers 40-60 sq. ft. per gallon depending on the texture of your concrete. Two coats are required. First coat will act as a base coat.

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Does anyone have any tips on how to mop and clean the surface after its dry? A regular mop isnt cutting it. I cant get dirt off of it
Answer:	Olympic Stain 52125-1 Premium Deck Cleaner, 1 Gallon
Question:	Will this adhear to my fiberglass boat floor.The finish is rough, with a non skid texture in the fiberglass
Answer:	Hi Jeremy, We would not recommend this product for fiberglass or a boat. Gel stains do much better on fiberglass and this product was not designed to be used as a marine coating.
Question:	Does it have a strong smell
Answer:	No more than the usual paint smell. Not objectionable to use. I painted a porch and deck so was outdoors. But, I would expect no problem to paint indoors. Just good practice to ventilate the area.
Question:	Can i paint my travertine stairs with this paint
Answer:	I would not. First of all, it is latex(water based) it will not hold up well on travertine. Secondly, WHY would you ever want to paint travertine? If the tile is porous, you will have to fill it with a cementitious fill and then paint it. If you DO paint it, I would prep it, fill it, prep again, and then use an EPOXY, one or two part, to completely cover and seal it. A good epoxy would be from Armorpoxy.com. Stay away from those big store brand garage floor epoxies.

Product features

Upgrade Your Patio

KILZ Porch & Patio Floor Paint provides a long-lasting, mildew-resistant finish that resists scuffing, fading, cracking and peeling. Apply to prepared, previously-painted or primed surfaces.

Protect Your Investment

Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises. For interior or exterior application on wood, masonry, non-ferrous metal and architectural plastics.

Perfect for Wood, Masonry or Metal

Not for use on areas subject to automotive traffic. Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.

Product description

Liquid Rubber Foundation Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.

Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, silicone, coal tar or other contaminants. Typically cures within 24-48 hrs.

Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs.



Not meant as a constant walking surface or for long term exposure to UV.

Coverage - Flat/Ponding Surface - 15 sq ft/G per coat. Apply 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) membrane.

Vertical Surfaces: Exterior - 20 sq ft/G per coat. Apply 3-4 heavy coats to achieve a 40-60 mil. (1.0-1.5mm) membrane. Interior - 50 sq ft/G per coat. Apply 2-3 heavy coats to achieve a 20-30 mil. (0.5-0.76mm) membrane.



Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.



Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.



Use all material up to achieve a long lasting membrane.

Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet.



Clean Up - Use soap and water or mineral oil to clean skin.

100% MONEY BACK GUARANTEE - If you need to return anything, we'll refund your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days. We offer 5 Star Customer Support, Videos and Application Guidance.

• PROTECTIVE FINISH FOR - Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more
• HIGHLY FLEXIBLE - Sealant final membrane has over 900% elongation in the sealing material preventing adhesion failure causing cracks and taring. Flat/Ponding Surface: 50 sq ft/G per coat
• EASY TO APPLY - No mixing required! Apply by brush, roller or high quality piston paint sprayer. Container can be closed and left over material used later. No pot life or working time like 2 component products
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Foundation Sealant is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

User questions & answers

Question:	can i use in wood? i want to do wooden pots
Answer:	N66C is recommended to set coils of 15-degree wire-weld or plastic inserted nails into a range of material, including wood shingles, insulation and fiber-cement boards, soft woods, drywall and sheathing and even steel siding. Uses fasteners from 1-1/4 to 2-1/2 inches long.
Question:	What's the lowest temperature to apply this product
Answer:	yes sometimes I have to angle the nail a bit so it doesn't go to deep in the fiber cement board
Question:	Approximately how many square feet will one 5 gallon bucket cover
Answer:	No not for hardie trim. This coil nailer is for the hardie siding not the trim. The trim needs to be attached with a finish nailer use 3" or 2 1/2" stainless steel or galvanized finish nails. Must use those types only with all hardie products. Others will corrode You need a finish nailer
Question:	will this work on a pond
Answer:	BTF83PT is a low profile nailer and weighs 10 lbs

Product features

Liquid Rubber Foundation Sealant

The perfect product for a leaking basement wall or building foundation, Liquid Rubber Foundation Sealant works by creating a watertight seal to keep moisture where you want it. With multiple uses, the possibilities are endless.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Foundation Sealant. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Highly Flexible

Liquid Rubber Foundation Sealant is highly flexible once cured. With over 900% elongation, you don't have to worry about minor movement destroying all your hard work. Still worrying about movement? Bulletproof your work with the help of Liquid Rubber Seam Tape or Geo-Textile.

Not meant as a constant walking surface or long term exposure to UV.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer.

Endless Possibilities

This nature-friendly product allows for an endless possibilities of usage. When you need a watertight seal, think Liquid Rubber. Use for foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Empower the DIYer in you with Liquid Rubber.

Product description

Give your outdoor spaces a fast, beautiful, easy & affordable update with RTG Deck, Porch, & Patio Anti-Slip Paint. It renews and protects outdoor floors, decks, ramps, & stairs made of sealed concrete, masonry & wood. Just 1-3 coats turn worn and weathered into warm and welcoming (and wow!). The surface is not only beautiful, but slip resistant—even when wet. Better yet, its unique traction additive isn't abrasive like other anti-slip paints, which is good news for bare feet and tender paws.This durable water-based polyurethane coating stands up to hot sun, driving rain, slushy snow, heavy foot traffic, company, kids, & pets without peeling, flaking, or fading. With its solid coverage and scuff resistance, you can rearrange furniture to your heart's content. No more parking rugs and chairs in the same spots season after season to hide stains & other surface eyesores. Channel your inner exterior decorator, move things around, and live a little! The results will look so comfortable and cozy you'll be tempted to turn the welcome mat around.RTG Deck, Porch, & Patio Anti-Slip Paint is available in four inviting neutral shades of Sand, Light Gray, White, or a rich, Clear/Amber. Choose a single color that complements your home's exterior, or be creative and dress it up with multi-toned diamonds or other patterns. You're limited only by your imagination and the size of your deck, porch, or patio.This fast-drying, DIY-friendly paint is very easy to apply with a brush or roller and cleans up easily with soap & water. Eco-friendly, low-VOC formula has very little odor so it's ideal for use in living spaces outdoors or indoors. Compare to Behr Premium Porch & Patio Floor Paint and Kilz Porch & Patio Floor Paint. RTG Deck, Porch, & Patio Anti-Slip Paint has a softer non-slip texture and is a much better value. All RTG products provide excellent results, are very easy to use, & are 100% made in the USA.

• Fast-drying, textured paint provides an attractive finish & secure footing on exterior surfaces that become slippery when wet. Great for decks, porches, patios, stairs, ramps, and much more. Traction additive is not abrasive like other anti-slip coatings.
• Easy to apply by brush or roller (1/4"-3/8" foam or nap roller cover for surfaces with a smoother texture; ½"-3/4" foam or nap roller covers for masonry with deeper texture).
• Durable coating withstands heavy foot traffic and harsh weather. UV-stable formula resists fading.
• Eco-friendly, low-odor, low-VOC, water-based polyurethane formula can be applied to properly prepared sealed concrete, masonry, and wood. No priming necessary. Cleans up quickly with soap & water.
• Choose from 4 neutral colors: White, Light Gray, Sand & Clear/Amber. One quart covers 80-100 sq. ft.

User questions & answers

Question:	Has anyone applied it to fresh treated wood (AC
Answer:	We applied ours to a newly built treated lumber deck with no issues.
Question:	Does this work on PVC composite decking
Answer:	I wish I could tell you. I am using it on brick and mortar. I have not finished porch yet but I do like what I see considering all of the rain we have had. Hope this helps.
Question:	Does this product help keep the concrete cool during summer results
Answer:	a white surface will stay cooler than dark surface colors...white is good
Question:	Would you recommend on concrete patio around a unground pool
Answer:	Yes, it's good quality and non slip, non heat but it is thick so you'll need more than what you would use for general paint coverage. We have a large deck (10x30ish) and we needed nearly 3 gallons to do complete coverage in two coats. It's pricey, but we hope it lasts longer than one season.
Question:	can it be used on galvanized steel (stock tank
Answer:	no,need special paint for galvanized steel.
Question:	My pool has a plaster finish. Do I need to use a primer before applying this paint
Answer:	I don't think so- you will need to clean it with TSP. You can check the web site to be sure.
Question:	Can this be used on a fiberglass pool with white gelcoat
Answer:	I am not an expert, but I see no reason you couldn't, it works well even over old pool paint
Question:	How much paint is needed
Answer:	How much paint is needed for a 18 x 34 pool

Product features

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint

In The Swim CRC Pro-Series Chlorinated Rubber-Base Pool Paint is a self-priming paint designed as a re-coat for existing rubber-base finishes. If re-coating an existing interior, one coat is suggested. A second coat may be required on unpainted or porous surfaces. Chlorinated Rubber-Base Pool Paint has excellent chemical resistance and color retention, allowing the paint to last 3 years on average. Coverage: 250 square feet per gallon on average. This product should be applied with a 9" roller equipped with a 3/8" nap. Pot Life: Indefinite as long as it is properly sealed. Allow to cure 4 - 6 hours in between coats. Cure 10 days minimum before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.