14 best gemini dj amps

Product description

3000W Professional DJ Power Amplifier .3000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability .XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise

• 5000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability
• XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise
• Comprehensive front panel indicators including signal, clip, protect and bridge | 3 speakon outputs for channels A/B/Bridge
• 5-Way biding banana plug channel outputs | Bridge control switch | DC output protection and Short Circuit protection | Frequency response 10Hz-50kHz at 1.5 dB
• Ground lift Switch | Total harmonic distortion: Less than 0.1% | Input sensitivity & Impedance: 0.77V | Signal to Noise (20Hz -20kHz) > 100dB

User questions & answers

Question:	Will it power 2 rockville rsg 15.24 dual 15 3000w passive speakers
Answer:	It can but I wouldn't overdue it cause it's only 5000w and the speakers are 3000w. It's always good to have a little breathing room so you wont damage your equipment
Question:	current requirement in amperes
Answer:	One QSC900 watt monitor amp, the 5000 watt amp, one 109 watt stereo plus equalizer all on one 15 amp breaker. If you really pushed everything such as a live show, I would break up the amps on separate 20 amp minimum breakers but 15 per amp might work.The amp doesn't really use 5000 watts. That's a # that has very little to do with how music power will reach your speakers. The most output in stereo is 1100 watts per channel @ 4 ohms. Power conditioner's are a great way to protect that investment from unforseen brown outs, shortage of power .
Question:	does this amp really put out 5000 watts of power if not how much watts does it really put out
Answer:	not tested the 5000 watts because only operates Channel 2. Channel 1 is not working DEFECTIVE WINE AND NEED TAKE A REPARAR.NI AMAZON PRESS BE NEITHER SELLER TO TELL ME WHAT TO DO WELL I'M DISAPPOINTED
Question:	Will this push 2 18inch subs
Answer:	It depends on impedance and power rating of your subs

Product description

Professional DJ Power Amplifier

User questions & answers

Question:	How many ohms 4 or 8 ohms
Answer:	yes it has mp3 on both desks. Yes you could use this item with an laptops but you'll have to get an aux cord in order to use it
Question:	Working in 220V
Answer:	No it does not come with a coffin.

Product description

3000W Professional DJ Power Amplifier .3000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability .XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise

• 3000 Watt IPP High Power output to drive professional loudspeakers without clipping | Front-to-rer airflow and cooling fan for thermal stability and reliability
• XLR to 1/4" (6.5mm Jack) balanced inputs | Stereo and Mono Bridge | Variable speed fan for low noise
• Comprehensive front panel indicators including signal, clip, protect and bridge | 3 speakon outputs for channels A/B/Bridge
• 5-Way biding banana plug channel outputs | Bridge control switch | DC output protection and Short Circuit protection | Frequency response 10Hz-50kHz at 1.5 dB
• Ground lift Switch | Total harmonic distortion: Less than 0.1% | Input sensitivity & Impedance: 0.77V | Signal to Noise (20Hz -20kHz) > 100dB

User questions & answers

Question:	Hello! Working in 220V? Thanks
Answer:	It works just fine with my Peavey SP 5 speakers and is plenty loud as I only run my mixer at about 3-4 on the master
Question:	will this amp push 2 18s
Answer:	No a Gemini amp does not daisy chain power, in order to reach your desired performance a higher power out put is needed, typically with power amps you should have double the output power ex: for a 1500 watt speaker 3000 watts is the safest output from an amplifier, imagine your speaker is you running a mile, you wouldn't want the exact amount of energy to just run that mile, it would be better to have more or maybe double that energy level hope this makes sense. I run 2 dual 15" 1300 watt loudspeakers with one 4000 watt Gemini amp, and a 1500 watt jbl monitor with a 2000 watt amp, just try to have more power put into the speaker than the required amount
Question:	Can this amp power a 12 inch subwoofer
Answer:	Yes. I do that routinely as part of my Karaoke system with the speakon feeds driving my main speakers and the barewire feeds to two smaller (but still substantial) speakers. There doesn't seem to be any drop in power or fidelity.

Product description

Gemini XGA Series XGA-3000 Professional Quality PA System DJ Equipment Power Amplifier with 3000 Watt Instant Peak Power

• THE ULTIMATE SOLUTION FOR CLEAN, DEPENDABLE POWER: The XGA-3000 Power Amplifier From Gemini Delivers Top Notch Performance, Highlighted By The 3000 Watt Instant Peak Power High Power Output To Drive Professional Loudspeakers Without Clipping. The XGA-3000 Also Features A Frequency Response Of 10Hz-50kHz at 1.5dB, Total Harmonic Distortion of Less Than 0.1%, and Input Sensitivity and Impedance of 0.77v For Premium Performance With PA Systems or DJ Equipment
• BUILT FOR RELIABLE PERFORMANCE: The XGA-3000 Power Amplifier Is Made For Seam-less, Reliable Performance, Highlighted By The Front-to-Rear Airflow and Cooling Fan For Thermal Stability, 3 Speakon Outputs for Channels A/B/Bridge, 5-way Binding Banana Plug Channel Outputs, DC Output and Short Circuit Protection, and A Ground Lift Switch
• DESIGNED WITH COMPREHENSIVE USE IN MIND: The XGA-3000 Amplifier Showcases A Variety Of Features For The Usability Of The Unit, Including XLR and 1/4" Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators (Including Signal, Clip, Protect, and Bridge), and A Bridge Control Switch
• PERFECTLY SIZED FOR ANY DJ SET-UP: The XGA-3000 Power Amplifier Unit Measures 19"L x 13.8"W x 3.5"H To Perfectly Fit With Any Set-Up Of DJ Equipment In A Variety Of Performance Spaces
• TRUST GEMINI, AN INDUSTRY LEADER: History Has Always Been An Important Part Of The Gemini Culture. Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment
• Input Sensitivity & Imp: .77V
• Freq Resp: 10 Hzû50 Khz at 1.5 Db

User questions & answers

Question:	With this push , peavey sp2x bwx (500w continuous/1,000w program/2,000w peak), bwx
Answer:	NOT REALLY
Question:	Is this good for 2x 250w 8 ohm 15in speakers?, im gonna use it to dj a football game, will it be loud enough? THX in advance
Answer:	It works just fine with my Peavey SP 5 speakers and is plenty loud as I only run my mixer at about 3-4 on the master
Question:	can you hook up two of these amps together and how do you do it
Answer:	No a Gemini amp does not daisy chain power, in order to reach your desired performance a higher power out put is needed, typically with power amps you should have double the output power ex: for a 1500 watt speaker 3000 watts is the safest output from an amplifier, imagine your speaker is you running a mile, you wouldn't want the exact amount of energy to just run that mile, it would be better to have more or maybe double that energy level hope this makes sense. I run 2 dual 15" 1300 watt loudspeakers with one 4000 watt Gemini amp, and a 1500 watt jbl monitor with a 2000 watt amp, just try to have more power put into the speaker than the required amount
Question:	Can I run 4 speakers at the same time using the 2 speakon and the 2 barewire speakers
Answer:	Yes. I do that routinely as part of my Karaoke system with the speakon feeds driving my main speakers and the barewire feeds to two smaller (but still substantial) speakers. There doesn't seem to be any drop in power or fidelity.

Product features

Professional Quality PA System DJ Equipment Power Amplifier

3000 watts of IPP Power means plenty of drive for your PA gear.

Product description

Features: slew rate (input filter limited): 40V/Us. Power Requirements: 120V/ 50-60Hz. Weight: 26.5 lbs. Dimensions: 19.09 x 16.93 x 3.35 inch. &Nbsp; power ratings:. RMS power output:. stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 4 Ohm: 1 x 1400W. Peak power output:. stereo 8 Ohm: 2 x 2000W max. Stereo 4 Ohm: 2 x 2500W max. Bridged 4 Ohm: 1 x 5000W max. Terminals:. input terminals:. combo jack (XLR and ¼”) A & B inputs. Output terminals:. Banana binding post speaker output. Speaker output. Xlr output to connect another amplifier or powered sub.

• Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp
• Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for speakers or speakers in a left and right configuration
• Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s). channel a & B clipping LED indicators. Channel a & B separate level controls. Power, Signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles
• Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity. Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (15A, 250V). frequency response (bandwidth @ 2VRMS out, @ -3.0dB) 10 Hz – 30 kHz. Thd + noise @ 1kHz full power: <0.03%
• Input impedance: 10K ohm balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7V. Damping factor: ( 100Hz, 10W, 4 ohms): 40.8. Damping factor: (1kHz @ 8 ohm): >400: 1. Effective Damping factor (100Hz, 10W, 4 ohms) 1.08. Output Impedance at speaker terminals: 0.09803 ohms. Frequency response vs THD+N (worst case, across normal bandwidth 1W) 0.11%. signal to noise ratio: > 100dB. Imd 60Hz & 1kHz, 4: 1: <0.04%
• Class A/B

User questions & answers

Question:	Any other user accessible adjustments? trimmers,pots,gain controls?? 1 is still too loud,0 is offpionner str-dn1080 b-zone audio out jacks to drive m
Answer:	This unit has four 1/4 inch mono/stereo inputs and one 1/4 inch stereo output. It does NOT have phantom power. There is a pre-amp in the unit that will power a headset or connect to an external amplifier. If your mics have 1/4 inch plugs, your set-up should work OK without additional equipment. If your mics have three-prong plugs, you might want to find a mixer that does have phantom power on at least two of the inputs (but not all). That would accommodate both instrument and vocal without more equipment or connections (which is why there are contrary remarks). Hope this helps.
Question:	So its got a double volume left and right double volume
Answer:	yes it works great for TV and karaoke that what i am using
Question:	Can this safely run a 2ohm bk-ct buttkicker
Answer:	I'm happy with it... works well. There was a dent in one of the speakers that I have tried to get in contact with them about and no answer back. Other then that I'm satisfied with it.
Question:	What about the power source? is it autovolt
Answer:	works with computer

Product features

Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp

• RMS Power Output:
• Stereo 8 Ohm: 2 x 500W
• Stereo 4 Ohm: 2 x 700W
• Bridged 4 Ohm: 1 x 1400W
• Peak Power Output:
• Stereo 8 Ohm: 2 x 2000W Max
• Stereo 4 Ohm: 2 x 2500W Max
• Bridged 4 Ohm: 1 x 5000W Max

Product description

Gemini introduces the new standard of live sound through this exclusive active loudspeaker series engineered for unprecedented performance. The AS-10P is packed with pro-audio tech and equipped with every modern capability. Get ready to rock your music in unwavering style. This unit is a powerful 10-inch active PA loudspeaker with a 1000-watt Class AB amplifier that produces powerful and deep bass with linear sound reproduction. With a wide dispersion horn and forward-firing bass reflex ports, prepare yourself for professional quality sound with fullness and clarity, even at high-res. Specific to the Gemini AS-12P portable speaker is its offering multiple inputs enhancing not only the experience listeners will have with this speaker system, but the overall quality of the unit. Take complete control and customize your sound with a variety of connectivity options. With industry standard XLR Line and RCA inputs, separate gain and EQ controls, Mix Output, and separate volume knobs, the possibilities for unique sound are endless. Independent frequency knobs allow easy adjustment of the equalizer while the clip LED alert light prevents any overkill on your speaker. The Gemini AS-10P is the best value on the market. Get high professional quality equipment without the high professional price tag. The AS-10P is ready for the use and abuse that comes with events and travel. With higher reliability and durability than most speaker plastics, this unit is housed in a rugged but lightweight ABS cabinet with a sleek design. This piece will look right at home in any set-up or kit. Enjoy even easier transport with its top and side handles and worry less with its flyable and stand-mountable capabilities. Serious bang for your buck. At Gemini, our goal is to design products that offer value and innovation in the DJ and Pro Audio markets. Since 1974, we’ve evolved and thrived by understanding the needs of our customers and recognizing industry trends. From our humble beginnings, we understood the potential of the DJ movement, and our ability to support this movement not only helped us grow as a company, it helped DJs gain recognition and esteem, calling deserved attention to their roles as artists and performers.

• PERFECT SOUND: Get Everyone Moving With the 2-Way High Power 1000W Peak Class AB Amplifier. Get Perfect Playback with Linear Frequency Response Between 40Hz-19kHz. The 10" LF Woofer with 1.2" Voice Coil & Piezo HF Compression Driver Creates Reliable Sound
• ENDLESS AUDIO OPTIONS: The AS-10P Portable PA Unit Features 2 Input Channels With Separate Gain Controls, Mic And Line XLR, 1/4” & RCA Inputs, High/Low Equalization Controls And Mix Output For Ultimate Control And Easy Mixing Over Your Sounds
• BUILT TO WITHSTAND EVERY SHOW: With An ABS Impact Resistant Nylon Fiber Cabinet, the Unit Can Withstand The Harshest Environments. It Also Has Top & Side Handles and Is Flyable & Stand Mountable. It Also Utilizes A Clip LED Alert To Prevent Overheating
• OPTIONS AVAILABLE IN THE AS SERIES: The AS Series Of Audio and PA Speakers Are Available In A Variety Of Size and Power Options For Limitless Uses. Check Out The Rest Of The AS Series To Perfectly Tie Together Your Audio Equipment Set Up
• TRUST GEMINI, AN INDUSTRY LEADER: Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment

User questions & answers

Question:	Does it have wheels and a top handle
Answer:	No, the built-in amplifier only powers the speaker. You need an external amp to power a passive sub.
Question:	can i hook up a passive subwoofer to these
Answer:	Yes, it’s awesome!!
Question:	is this powerful enough to use as the vocal PA and be heard above an amplified blues-rock band in a small venue (bar
Answer:	If your AV receiver can send a signal over RCA, XLR or AUX cable, yes.
Question:	Can you connect these to an AV receiver? I don't see any instructions on how to do that
Answer:	I dont think so it just has one stereo output, a right and left channel RCA jack that I use to run into a mini plug to jack into my laptop

Product description

PylePro Model : PTA10002-Ch. Bluetooth Pro Audio AmplifierBluetooth Professional Power Amplifier - 2-Channel Rack Mount Bridgeable Pro Audio Amp (1000 Watt) Features: 2-Channel (A/B) AmplifierBridge-able Amp: Bridge Mode AbilityBuilt-in Bluetooth Wireless Streaming 1/4'' TRS Input Connector Jacks XLR Input Connector Jacks SpeakOn Output Connectors (A/B/Bridged) Pair Speaker Terminal / Binding Post ConnectorsPower, Protect, Clip, Signal LED IndicatorsLeft and Right Channel Level Signal IndicatorsBuilt-in Ventilation Cooling FansFront Panel Control CenterRack Mountable System Bluetooth Connectivity: Simple & Hassle-Free PairingInstant Wireless Audio Streaming AbilityWorks with All of Today’s Latest Bluetooth Devices(iPhone, Android, Smartphone, iPad Tablet PC etc. )Bluetooth Network Name: ‘Pyle Speaker’ Bluetooth Version: 3. 0Wireless Range: Up to 30’+ ft. What's in the Box: Pro Audio AmplifierPower Cable Technical Specs: MAX Power Output: 1000 Watt2 x 500 Watt @ 4 Ohm2 x 250 Watt @ 8 OhmDistortion: Input Level: +4dBSignal/Noise Ratio: 102dBFrequency Response: 20Hz - 20kHz, +/-0. 2dBPower: 110/220 Volt, SwitchableDimensions (L x W x H): 19. 0'' x 11. 4'' x 3. 9'' -inchesThe Pyle Pro Audio Amplifier features high-powered 1000 watt MAX power output. Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including Smartphones, Tablets, Laptops and Computers. Hassle-free receiver pairing allow you to stream wireless audio instantly. The amp’s rack-mountable 2-channel design with bridge-ability mode make it perfect for all sound and studio applications. Additional system connectivity features include 1/4'' TRS and XLR Input Connectors, Speak-On Output Connectors (A/B/Bridged), and Speaker Terminal / Binding Post / Banana Plug Connectors. Dual ventilation cooling fans, aluminum heat sink and overload protection LED indicators keep your equipment safe and your sound secure. Enjoy reliable sound processing power with the Pyle Bluetooth 2-Ch. Bridgeable Power Amplifier.

• BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly
• SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers
• POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational
• SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires
• AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling

User questions & answers

Question:	How do I hook up a microphone to the amplifier
Answer:	Use a pre-amp or review your blue-tooth device (tablet) to provide the signal to this amp.
Question:	Will these work with my numark nvii
Answer:	depends on what kind of speaker you have and how many if we are talking about power, now if we are talking about connections so it works
Question:	Could I use this for my KRK ROKIT 8 G3 for my computer
Answer:	As long as your impedance is 8 ohms, it should work.
Question:	can this amp run the ButtKicker Mini Frequency Response - 10Hz - 250Hz, 50 Watt Minimum, 250 Watt Maximum, Impediance - 4 Ohms
Answer:	I don't know about the minimum wattage but I know it maxes out at 250 watts (RMS value) when using the BRIDGE connection which has an output impedance of 4 ohms. Obviously you just need to make sure your main power/volume knob is turned up enough to get your 50 watt minimum. If you run the single channels they have an output impedance of 8 ohms.

Product description

Power Ratings:



RMS Power Output:

Stereo 8 Ohm: 2 x 125W

Stereo 4 Ohm: 2 x 200W

Bridged 8 Ohm: 1 x 400W

Peak Power Output:

Stereo 8 Ohm: 2 x 250W Max

Stereo 4 Ohm: 2 x 400W Max

Bridged 8 Ohm: 1 x 1000W Max



Terminals:



Input Terminals:

Combo jack (XLR and ¼”) A & B inputs

RCA A & B Inputs

Output Terminals:

Banana binding post speaker output

Speakon output

XLR direct output



Features:



Rockville RPA5 400w RMS (200 x 2) 2 Channel Professional/DJ Rack Mount Amplifier

2U rack space

Bridged and Stereo output switch makes this perfect for subwoofer, speakers, or speakers

Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers

Channel A & B Clipping Led Indicators

Channel A & B Separate Level Controls

Power, signal, overload, clipping, and protection LED indicators on front of amp

Heavy duty rack mount ears with handles

Built-in dual high velocity quiet cooling fans

Maximum headroom for 4-ohm and 8-ohm Speakers

Level controls for precise setting and matching of sensitivity

Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load

User serviceable fuse (4A, 250V)

Frequency Response: 20Hz to 20KHz 102dB

Power Requirements: 120V / 50-60Hz

Weight: 13.4 lbs

Dimensions: 18.97 x 11.02 x 3.54 inch

• Rockville RPA5 400w RMS (200 x 2) 2 Channel Professional/DJ Rack Mount Amplifier. 2U rack space.
• Bridged and Stereo output switch makes this perfect for subwoofer, speakers, or speakers.
• Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers. Channel A & B Clipping Led Indicators.
• Channel A & B Separate Level Controls. Power, signal, overload, clipping, and protection LED indicators on front of amp.
• Heavy duty rack mount ears with handles. Built-in dual high velocity quiet cooling fans.
• Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity.
• Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load.

Product features

Rockville RPA5 400w RMS (200 x 2) 2 Channel Power Amplifier Pro/DJ Amp

Heavy-Duty Powerhouse Pro Amplifier

The Rockville RPA5 1000-watt power amplifier combines efficiency with great sound to deliver a lightweight amplifier that packs a ton of punch. This amplifier is engineered using advanced design and components creating a lightweight design and extremely reliable operation that can pound daily for years and years of use. The computerized IC controlled protection circuitry allows delivery of peak power while preventing overloads. The RPA5 is optimized for 4 and 8-ohm speakers, and is equipped with a stereo/mono speaker output switch allowing for quick system impedance optimization. The RPA9 amp fits perfectly into standard 19” racks, and is lightweight enough (less than 30 lbs.) to make it incredibly easy to transport.

Top features!

We added a built in crossover so that you can use the amplifier for subwoofers or full range speakers. When connecting subwoofers simply select the low pass. We also added a link output which will allow you to use of these amplifiers together at the same time for venues that demand even more power. The other enhancement we made is that we added all the input and output terminals that ensure this amplifier is compatible with any setup! We added XLR and ¼” combo jacks and RCA inputs making this amp perfect for any mixer and any speakers on the market. For outputs, we have banana and speakon outputs plus XLR direct outputs.

Mono Subwoofer-ready

A stereo/mono switch on the rear of the system allows for quick configuration to use multiple speakers in stereo mode or a single subwoofer in mono mode.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Power Ratings:

RMS Power Output:

• Stereo 8 Ohm: 2 x 125W
• Stereo 4 Ohm: 2 x 200W
• Bridged 8 Ohm: 1 x 400W

Peak Power Output:

• Stereo 8 Ohm: 2 x 250W Max
• Stereo 4 Ohm: 2 x 400W Max
• Bridged 8 Ohm: 1 x 1000W Max

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Terminals:

Input Terminals:

• Combo jack (XLR and ¼”) A & B inputs
• RCA A & B Inputs

Output Terminals:

• Banana binding post speaker output
• Speakon output
• XLR direct output

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Features:

• Rockville RPA5 1000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
• 2U rack space
• Bridged and Stereo output switch makes this perfect for subwoofer, speakers, or speakers
• Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
• Channel A & B Clipping Led Indicators
• Channel A & B Separate Level Controls
• Power, signal, overload, clipping, and protection LED indicators on front of amp
• Heavy duty rack mount ears with handles
• Built-in dual high velocity quiet cooling fans
• Maximum headroom for 4-ohm and 8-ohm Speakers

Product description

LED Meters Integrated cooling fan 1/4 in. inputs

• 3000 Watt Power Amplifier
• LED Meters
• Integrated Cooling Fan

User questions & answers

Question:	Are there rca outputs to speakers on this unit and is this 3000 watts out
Answer:	yes you can
Question:	Will this amp hold 2 18 inch rockville 1000watt subs
Answer:	It's a midi controller; so of course. But if you're asking is it "plug & play; then the answer is most likely "no". You will have to map out all of the functionality on your own, using VDJ's midi mapping feature. I don't think there are GMX templates online that are ready to work with VDJ at this time. But look around, there might be. Hope this helps.
Question:	What kind of epualizer can I use for this amp
Answer:	No it cannot
Question:	Is the 1500 watt per side rating into 2ohm's or 4ohm's
Answer:	Hello,Not clear on your question, but there is a headphone monitor out.Balanced XLR & RCA master outputs, RCA booth output with dedicated volume control, front 1/8" and 1/4" headphone outputs.

Product description

Max Peak power: 2200 Watts // // Unit size: 18.9x3.54x11.42 inches // // Output Circuitry: Class A/B // // Input: XLR, ¼" (6.35mm), Output: Speakon, Banana binding post // // Front Controls: AC switch, Ch.1 and Ch.2 Gain Knobs // EMB Pro - PA4400 - Rack Mount Professional Power Amplifier - 2200 Watts PA Band Club FOR HOME DJ KARAOKE ENTERTAINMENT Max Peak power: 2200 Watts|Unit size: 18.9x3.54x11.42 inches|Output Circuitry: Class A/B|Input: XLR, 1/4" (6.35mm), Output: Speakon, Banana binding post|Front Controls: AC switch, Ch.1 and Ch.2 Gain Knobs The EMB Professional PA-4400 power amplifier boasts a maximum output of 2200 Watts giving you more bang for your buck. The PA-4400 has can accept both ¼” and XLR input, and output can be either Speakon, or banana binding post. Single fan cooling with front to rear air flow. The front panel boasts separate output knobs, allowing you to have full control of each channel’s volume. Front side power switch for easy operation, as well as separate indicator LED’s for Power, Signal, Clip, and Protect.

• EMB Pro - PA4400 - Rack Mount Professional Power Amplifier - 2200 Watts PA Band Club FOR HOME DJ KARAOKE ENTERTAINMENT
• Max Peak power: 2200 Watts|Unit size: 18.9x3.54x11.42 inches|Output Circuitry: Class A/B|Input: XLR, 1/4" (6.35mm), Output: Speakon, Banana binding post|Front Controls: AC switch, Ch.1 and Ch.2 Gain Knobs

User questions & answers

Question:	Can i use this with 6 ceiling speakers for a retail store
Answer:	you can use four speakers with no chance of error in unbalancing the ohms, you will be better off getting a receiver with 70m ohms output, 100watts to 150 watts should be fine for a store.
Question:	Can this amp be bridged? If so where the bridged switch
Answer:	yes. by speaker input and configuration on back of amp.
Question:	watt 2 output
Answer:	yes
Question:	Shipping is free to Argentina? work in 220v
Answer:	sorry not for 220V,

Product description

The MUSYSIC SYS-4500 is a Professional Power Amplifier that was developed using the expertise of professional sound engineers, working musicians and professional DJ's. For its price range, it's rare to find a professional power amplifier that compares with the SYS-4500's awesome performance, flexibility and crystal clear sound quality. 

• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• 4500 watts of Instant Peak Power (750 watts RMS)
• XLR, ¼” (6.5mm Jack) Balanced Inputs
• Speakon and Banana binding post Outputs
• Front-to-Rear Airflow and Dual Cooling Fans

User questions & answers

Question:	musysics at the back of this amp. has 1/4 inch (quarter jack) balance,asking if what kind of cable patch to use for this trs or ts
Answer:	You can use either XLR or 1/4" jack to use for input. So the 1/4" is mono jack. But both are input connection
Question:	Is this amp good for two 15 inch subwoofers
Answer:	Impossible question too answer truthfully without more information about the subs... What's the RMS / peak power. Are they single voice coil or dual?? What ohm are they??
Question:	I owned 3 pair of this amp. 4500 musysics my question is can i use the "input" 1/4" jack as "output" for interconection (daisy chain) 2nd. & 3rd amp
Answer:	No. This amp doesn't have signal output. 1/4" is input. You need some sound processor or crossover to hook three amp together.
Question:	I have 2 rockville towers totalling 4 15inch subs 8 pizo tweeters and 2 cone tweeter at 4 ohms. Will this amp push them
Answer:	yes they will push them with no problem... although i would get two if i was you.. these are some of the best amps i have had so far very reliable

Product description

Brand New Torque Audio by Technical Pro AW1 1000 Watt 2-Channel DJ or Live Sound Rack Mount Power Amplifier

• 1000 watts peak power
• 450 watts @ 2 ohms
• Outputs: Banana binding post
• Power, Level & Clipping indicators per channel
• N/A

User questions & answers

Question:	Can you use this with headphones
Answer:	Does not have headphone jack
Question:	Can anybody recommend a great cabinet to run this through
Answer:	Lights not working I don't use it
Question:	Would this power to studio speakers from a mixer
Answer:	As long as the have red and black speaker inserts in the back of them, yes.
Question:	Can i use this with 4 subwoofer 150 watts, 15 inch, 6 ohm,full bass...? Puedo usar este amplificador para 4 woofer de 150 vatios, 15 inch, 6 ohm
Answer:	No no tiene la potencia necesaria para lo que quieres. Además, sólo puedes conectar a traves de RCA.

Product description

The MUSYSIC SYS-3200 is a Professional Power Amplifier that was developed using the expertise of professional sound engineers, working musicians and professional DJ's. For its price range, it's rare to find a professional power amplifier that compares with the SYS-3200's awesome performance, flexibility and crystal clear sound quality. 

• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• 3200 watts PMPO, 1600W@2Ohms,800W@4Ohms,400W@8Ohms
• XLR, ¼” (6.5mm Jack) Balanced Inputs
• Speakon and Banana binding post Outputs
• Front-to-Rear Airflow and Dual Cooling Fans

User questions & answers

Question:	whats the power consumption on this amp
Answer:	If its volts you're asking about 120 -220 switchable, watts are on amp 3200
Question:	is it 220v
Answer:	Yes, this unit have switchable 110-220v, so you can use all over the world.
Question:	Would anyone recommend a good graphic EQ to pair with this amp
Answer:	Check MUSYSIC MU-EQ10B
Question:	If i connect an ipod or phone to chanel A input will it play on both outputs for the speakers? Or only one side
Answer:	only one side. You need cable 3.5mm to dual 1/4", then it will play on both speakers.

Product description

The MM1 Compact mixer from Gemini is proof that good things come in small packages. The perfectly compact design of our MM1 2-channel stereo mixer gives DJs of all types the control they demand with features to fit any kit. The beauty of the MM1 mixer is its professional and consumer-friendly design that combines efficient use and an unmatched level of quality. Perfect for both novices and experts alike, the MM1 unit will keep your rig light and looking great while remaining a dependable mixing solution for your top tracks. A smooth yet sturdy cross-fader makes transitioning from source to source effortless and clean as you craft your sound, while individual gain control lets you fine-tune your final piece. With the inputs and outputs of the pros, you'll master your mix sooner than you thought. Each channel on the MM1 unit booms with 2-band rotary EQ, giving you the ultimate power to delicately blend the highs and lows of your tracks. The MM1 mixer features two line RCA inputs, master RCA output, and 1/4″ Microphone Input with dedicated Volume Control that serve as the perfect connectors between you and your audio. The MM1 also includes a Headphone Volume Control that lets you preview your creation to ensure you sound polished and professional for your audience. At Gemini, our goal is to design products that offer value and innovation in the DJ and Pro Audio markets. Since 1974, we’ve evolved and thrived by understanding the needs of our customers and recognizing industry trends. From our humble beginnings, we understood the potential of the DJ movement, and our ability to support this movement not only helped us grow as a company, it helped DJs gain recognition and esteem, calling deserved attention to their roles as artists and performers.

• BIG MIX, LITTLE PACKAGE: The MM1 2-Channel Stereo Mixer has a Compact Design for Both Consumers and Professionals. The 2-Band Rotary EQ with Gain Control Lets You Blend the Most Detailed Tracks. Screwless Bottom Panel Makes for Unobstructed Mixing.
• SILKY SMOOTH MUSIC MIXING: The MM1 Mixer Provides A Smooth, Sturdy Cross-Fader for Effortless and Clean Transitioning. This Unit Also Features Individual Gain Control Lets You Fine-Tune Your Final Piece Into Your Magnum Opus
• TOTAL CONTROL OVER YOUR MUSIC: The MM1 Unit Features Rotary Headphone Volume Adjustment That Ensure You Can Preview Mixes for Final Touches and Make Them with the Easy-To-Use Rotary EQ Control
• THE INPUTS/OUTPUTS USED BY THE PROS: The MM1 Mixing Unit Includes Two Line RCA Inputs and A Master RCA Output 1/4″ Microphone Input with Dedicated Volume Control Connect You To Your Audio
• TRUST GEMINI, AN INDUSTRY LEADER: Since 1974, We've Provided Innovative Products For DJs, Musicians, Sound Contractors and Professional Installers Around The Globe. This Is What Drives Us As An Industry Leader Is DJ and Audio Equipment

User questions & answers

Question:	Is it possible to flip/reverse the crossfade
Answer:	The power amplifier output to this mixer can be input or output to the computer through USB. What input do you have for your mixer?
Question:	I got a plug in for europe, how do I get one for US
Answer:	Dear, the product package contains instructions. If you need it now, you can email me. Thanks
Question:	My nephew only has one speaker, can he use this mixer with it . . . he's only 15 and doesn't have alot of equipment
Answer:	Yes, it can be used as an external sound card.
Question:	Are the dimensions actually 8 x 5 x 12 inches or is that Amazon's measurement of the box
Answer:	You just can use the PC or bluetooth. You can use them together. Press the mode button to change it.

Product features

Perfectly portable, full-featured DJ mixer

Just the right size for use as a session mixer or sub-mixer.

Pro Quality Connections

Headphone output and Microphone input.

Center Of Your Setup

Connect 2 decks, a mic, headphones, and even a full-blown PA.

Clear Inputs And Outputs

RCA Master and Record outputs, and 2 Line inputs.

Two Channel Mixer

Each channel has gain and 2-band EQ.

Tough Enough

An all-metal enclosure lets the MM-1 take tons of abuse.

45Mm Crossfader

Mix between channels using industry-standard controls.