13 best amir motion sensor lights

Product description

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights



AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.



With easy installation,it mounts in seconds. No hammers, drills, or tools required. Simply use the double-sided adhesive pads or stick to any metal surface with the built-in magnet.



Note:



1. Please kindly check whether the batteries have been installed in the correct direction.

2. This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

3. If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

4. The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.

5. Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.



Specifications:

1.5v, 0.3w

Sensitivity: 3 meter Distance

Sensor Range: 120 degrees

Operating temp: -20°C-40°C

LED Qty: 6 LED

Light color: Pure White

LED life: 50,000 hours or more

Mounting: Tape or Magnet

Product Diameter: 3.15 in

Thickness: 0.87 in

Package includes:



6 x Motion Sensor LED Night Light

6 x double-sided adhesive pads

1 x User Manual

• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With adhesive pads and built-in magnet, you can stick on anywhere you like
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

Product features

AMIR Motion Sensor Light

AMIR Motion Sensor Lights act like little 'guardians', provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

Here are some notes for you when you use it :

Here are some notes for you when you use it :

- Please make sure that the anode and cathode of battery has been installed correctly.

- Please do not install 2 lights too close. One of them effected by the other may not work.

- If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

Product description

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights

AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

With easy installation, it mounts in seconds. No hammers, drills, or tools required. Simply use the double-sided adhesive pads or stick to any metal surface with the built-in magnet.

Note:

1. Please kindly check whether the batteries have been installed in the correct direction.

2. This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

3. If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

4. The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.

5. Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.

Specifications:

1.5v, 0.3w

Sensitivity: 3 meter Distance

Sensor Range: 120 degrees

Operating temp: -20°C-40°C

LED Qty: 6 LED

Light color: Pure White

LED life: 50,000 hours or more

Mounting: Tape or Magnet

Product Diameter: 3.15 in

Thickness: 0.87 in

Package includes:

3 x Motion Sensor LED Night Light

3 x Double-sided adhesive pads

1 x User Manual

• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

Product features

Automatic Sensor

- Only turn on in the dark and when motion is detected.

- Auto-on within 10 feet, auto-off after about 15 seconds of no motion detected.

Enough Light

- Provide enough light to make sure you never stumble in the dark.

- Sensitivity : 10 feet Distance.

- Sensor Range: 120 degrees.

Battery Operated

- Need 3 AAA Batteries.

- Tip: Twist to remove the cover.

• Smart Motion Sensor: This motion sensing light adopts PIR infrared technology to detect human motion in the range of 3M/9.84ft and with 120°detecting angle, and it will light up automatically when motion is detected in the dark and auto-off after 20 seconds of inactivity.
• Soft Light: The sensing night light is built in 1*2835 LED bulb, which emits soft warm white(4000K-5000K) and has lower consumption, offering enough light and eye-protection without glare, avoiding being stumbled in the dark effectively.
• Simple Mounting: The light comes with 3M adhesive sticker that enables you to stick it on a cabinet or on the wall as you prefer. You can install it in seconds without screws to avoid damaging any furniture or wall, disassembling it easily without extra tools.
• Durable & Battery Powered: The shell is made of premium ABS+PC, which is durable and lightweight. Besides, it’s powered by 3*AAA replaceable batteries (not included), providing light where limited or unable access to electricity.
• Multiple Occasions: Broadly applied to multiple occasions include children’s room, hallway, bathroom, kitchen, bedroom, living room, closet, wardrobe, cabinet, basement, stairs, corridor, etc. If you're not completely satisfied with your purchase, please feel free to contact us, we provide 100% Money Back and ONE YEAR Guarantee. Please enjoy this absolutely risk-free purchase right now!

User questions & answers

Question:	How many LED each light
Answer:	No, batteries not included.
Question:	What kind of batteries do they need
Answer:	Yes, of course you can.
Question:	is there a way to have these always on
Answer:	This light comes with a remote control that you can turn off directly with the remote control.
Question:	Easy to install
Answer:	Yes, it does.

Product features

Specifications:

Light source: 2835 LED

LED quantity: 1pc

Color temperature: 4000K-5000K

Power: 0.5W

Lumen: 10-11LM

Voltage: 4.5V

Powered by: 3*AAA batteries (not included)

Detecting distance: 3M/9.84ft

Detecting angle: 120 degrees

Material: ABS+PC

Notes:

-This device is for indoor use only.

-This device should not be exposed to dripping or splashing water.

-It is powered by 3*AAA batteries(not included). Do not attempt to recharge them when using non-rechargeable batteries.

-Replace batteries in time when the light dims.

-Replace all batteries of a set at the same time, do not mix new and used batteries or mix different types of batteries together when using.

-Ensure the batteries are installed correctly with regards to polarity (+ and -).

-Do not install it near any heat sources.

-Remove batteries from equipment which is not to be used for an extended period.

-Please do not install 2 lights too close from each other. The lighting may cause the other one DOES NOT work.

• Automatic Sensor: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected.
• 10 LED & Super-Bright: With 10 LED in each light, AMIR motion sensor lights provides enough light to make sure you never stumble in the dark.
• Simple Installation: An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required.10 pcs bright white LED, energy-saving and environment friendly.
• Battery Operated: This AMIR Motion Sensor LED Light is Powered by 4PCS AAA batteries (not included). AMIR smart sensor chip with passive infrared technology, reliable performance and high sensitivity, accurately detect your movement.
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	How long are the lights
Answer:	I do not think so.
Question:	I just got these and they say the need to be 3m (9 feet) apart. Is that correct
Answer:	I’ve had no problems down to 25
Question:	What is the Lumen rating
Answer:	I would not put them in a back yard unless you can put them up high on a building or pole. The yard will be well lit but no one will want to be out there because they will be blinded by them. I dont see any evidence for them coming in white but you could lightly sand the powder coating and paint them yourself I would think.
Question:	Are you able to manually switch off the lights
Answer:	Dear Customer, Thank you very much for your attention to our LED wall pack. Because this product is in short supply,so I set up its purchase quantity. But we've solved this problem as quickly as possible. And we also have another led wall pack. For example,120W warm white led wall pack https://www.amazon.com/dp/B074M7FB4R 60W white led wall pack,60W warm white led wall pack light fixture. https://www.amazon.com/dp/B074M7H43G https://www.amazon.com/dp/B074M7P85Z Hope can solve your problem. If you have any questions, Pls contact us,we will responde asap. Sincerely, Targetlighting Customer Service

Product features

AMIR Motion Sensing Closet Lights, DIY Stick-on Anywhere Portable 10-LED Wireless Cabinet Night/ Stairs/ Step Light Bar with Magnetic Strip

Specifications:

1. Sensitivity> 3 Meter Distance

2. Sensor Range: 120 Degrees

3. LED Qty: 10 LED

4. Light Color: Pure White

5. LED Life: 50,000 Hours Or More

6. Size: 7.4 x 1.2 in (L x W)

7. Material: Aluminum + ABS

8. Light Weight: 114g / 4.0oz

Note:

●Please kindly check whether the batteries have been installed in the correct direction.

●This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

●Battery Not Included

Package Contents:

6 x 10 LED IR Sensor Closet Light

1 x User Manual

GCID: AMIR

• ✅BATTERY OPERATED: This Motion Sensing Closet Light is powered by 4PCS AAA batteries (not included). Smart sensor chip with passive infrared technology, reliable performance and high sensitivity, accurately detect your movement.
• ✅AUTOMATIC SENSOR: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected.
• ✅IDEAL LIGHTING: With 10 LED in each light, this motion sensor lights provides enough light to make sure you never stumble in the dark. Fantastic energy saving and environmentally friendly ensures an extra-long life for your light.
• ✅SIMPLE INSTALLATION: An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required.
• ✅WARM PROMPT: ▲This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. ▲Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	If we place these lights under our dresser (in our closet) do you think they would detect the motion or would our feet need to go right by them
Answer:	7.5 x 1.2 in (L x W)
Question:	What's the material of this light
Answer:	NO I have mine under cabinets over counter and only 2-3 ft. apart. Have 4 sensor above an 8-9ft. counter with an "L" shape. They work fine going on by motion in area under sensor. I believe the 3 meter suggested is for those that could be affected by the light nearest one emits if they face each other.
Question:	What's its detection range
Answer:	The only info provided is: work voltage:DC3-V; static features: load power: 600MW; induction distance: 3-5M; induction angle:
Question:	How long do the batteries last if used in something like a closet where it might be open once a day
Answer:	Thanks for your question.My pleasure let you know you can removing the batteries...it is very simple.

• BATTERY OPERATED - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• SUPER-BRIGHT LED BULBS - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR MOTION & LIGHT SENSOR - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• EASY INSTALLATION - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
• WARM PROMPT - This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	What's its detection range
Answer:	The motion sensors in then are pretty strong and provide a great range. I had them in my closet as well. A little too strong for me as it kept going off and killed my batteries in a few weeks. They are amazingly bright though!
Question:	How many LED each light
Answer:	Aluminum + ABS
Question:	Batteries included
Answer:	It's 120 degrees
Question:	Are they rechargeable lights
Answer:	it dpends on what batteries you used. this product design Automatic Sensor: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life

Product features

Battery Operated

- Need 3 AAA Batteries.

- Tip: Twist to remove the cover.

Automatic Sensor

- Only turn on in the dark and when motion is detected.

- Auto-on within 10 feet, auto-off after about 15 seconds of no motion detected.

Enough Light

- Provide enough light to make sure you never stumble in the dark.

- Sensitivity : 10 feet Distance.

- Sensor Range: 120 degrees.

• Three Effective Modes - With 10 years disassembling electronic light and repair guides data, our technicians re-engineered our night light. This night light provides three lighting modes(ON-OFF-AUTO). AUTO: Auto-on within 9.8 feet(3 meters), auto-off after 30 seconds of no motion detected. It will turn on only when it is dark and when motion is detected. ON: Working modes, the light is always on.
• Gentle & Warm Light - The motion sensor light, which is designed and manufactured by AMIR using highest quality materials and methods. It can bring you appropriate lightness in the dark, giving cozy and soft lighting without dazzling to your eyes. Moreover, it can brighten up your path and keeps you away from stumbling at night.
• Unique Design - This LED night light features modern design, lightweight and compact, meets your satisfaction of daily lighting and saves spaces.
• Easy Installation - Two installation options make ideal for adding illumination wherever you need it. An adhesive back sticks to a variety of surfaces for instant and automated lighting, while mounting screws are provided for permanent installations.
• Various Application Occasions - It's available in anywhere indoor place, Fully meet your lighting needs in different applications like bedroom, bathroom, kitchen, corridor, hallway, stairway, basement, etc. You are fully covered by our lifetime WARRANTY and 60 DAYS RETURN GUARANTEE. If you aren’t 100% satisfied. Please feel free to contact with our customer support.

User questions & answers

Question:	what are the dimensions of each light
Answer:	6
Question:	Does the always on only work when it’s dark? Or is it literally always on no matter the brightness in the room
Answer:	Batteries are not included.
Question:	How did the lights attach
Answer:	Dear customer, they are not rechargeable lights, they are powered by 3PCS AAA batteries.

Product features

Smart and safe illumination in your house

This night light provides three lighting modes (ON-OFF-AUTO). AUTO: Auto-on within 9.8 feet (3 meters), auto-off after 30 seconds of no motion detected. It will turn on only when it is dark and when motion is detected. ON: Working modes, the light is always on.

Multiple Application

It's available in anywhere indoor place. Fully meet your lighting needs in different applications like bedroom, bathroom, kitchen, corridor, hallway, stairway, basement, etc.

• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With adhesive pads and built-in magnet, you can stick on anywhere you like
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Lightweight & Portable Design – Circle shaped and compact sized make it an ideal night light for your bedroom, bathroom, stairs, hallway, kitchen, closet, etc.

User questions & answers

Question:	Is it possible to change the batteries by from the "face" by twisting rather than twisting the back off
Answer:	Mine's came in a set of 3. They are approx. 3"x3" in size. Been working good so far.
Question:	Can I use rechargeable batteries for these
Answer:	if you do not turn them off in the morning when it is bright, when you pass by them they turn on. but what i do i turn them off in the morning to save battery, you will love them.. it come with a self sticking pad, but screw the screws so they are very sturdy. best purchase ever
Question:	can I use these in the fridge
Answer:	They come with an adhesive to stick
Question:	What type of battery do they need
Answer:	Sensor Range: 120 degrees.

Product description

Features:

- AUTOMATIC SENSOR: Auto-on within 3 meters, auto-off after 15 seconds of no motion detected

- 6 LED & SUPER-BRIGHT: With 6 LED in each light

- SIMPLE INSTALLATION：An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required

- BATTERY OPERATED: Powered by 2PCS AAA batteries (not included).

- NO WIRING REQUIRED: Use this under cabinet led lighting with the provided screws.

Specifications:

1. Sensor Scope: <3m / <120 degrees

2. LED Qty:  6 LED 

3. Light Color: White

5. Size: 3.9 x 1.2 in (L x W) 

6. Material: Aluminum + ABS 

7. Light Weight: 50g

Note:

●Please kindly check whether the batteries have been installed in the correct direction.

●This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. 

●Battery Not Included

Package Contents:

3 x 6 LED Motion Sensor Lights 

3 x Magnetic Strip

1 x User Manual

GCID: AMIR

• Motion Activated: It will light up automatically when someone passes or move within the scope of 3 meters. It will turn off after 15 seconds when no motion is detected. Please remember that motion sensing function will work only and better in dark condition.
• Adorable Mini Size & Amazing brightness: This is a rather mini size comparing to other motion sensing light bar of Amir. It will be more suitable to drawer, locker, or other small spaces, but it can be used in wardrobe, bathroom, and corridor as well because it can give out no less brightness than bigger size product.
• Simple Installation: Remove the adhesive tape of the magnetic strip and stick it to anywhere you want, and mount the light on the strip after loading 2 AAA batteries(not included). Please avoid humid or unclean surface which would affect the adhesion and cause the falling of the light.
• Multiple Occasions Suitable: Mini size, multiple use. You can use it on book shelves, drawers or shoe cabinet, where the ceiling light cannot reach. With its convenient size and installation, you can also use it to decorate the dollhouse for your kids.
• Stylish Design: It¡¯s a perfect gift for your friend and family, for its inexpensive and effective stuff for daily use.

User questions & answers

Question:	Will the light work if there is other light in the room
Answer:	You twist it off if you have it stuck on the surface. Not too hard as I was able.
Question:	What's its detection range
Answer:	I don’t see why not. I don’t have them, but it’s just a basic light with motion sensor.
Question:	Does it come with batteries
Answer:	Unsure. Please check product information.
Question:	What types of battery do they need
Answer:	As it says in the description bullet points, 3 AAA batteries. Works well with rechargeable AAA.

Product description

Specifications:

1.Power supply：3*AAA battery (not included)

2.Rated power : 0.2W

3.Life time : 50000 hours

4.Working temperature : -10℃ ~ +40℃

5.Weight : about 220g

6.Lumen：12lm

7.Material ：PC+ABS

8.Sensor Time : 15s

9.Angel ：120°

10. Input voltage ： 4.5V

11.Sensor distance : 3M

12.Color temperature : 5000K

13.Switch type： ON-AUTO-OFF

14.Led quantity : 6 led

Note:

1.When it's working, please prevent rainwater from penetrating which will damage the internal circuit;

2.When it's sensing state, the probe should not face the area where the temperature changes significantly, eg:air conditioners and heaters;

3.There should be no obstacles in front of the detector that affect its detection

Package include:

3 x Motion Sensor Light

1 x Usage manual

• Super-bright LED Bulbs - 6 pcs super bright LED bulbs; bright enough to make sure you never stumble in the dark.
• Three Effective Modes - ON-OFF-AUTO: AUTO: Auto-on within 10 feet, auto-off after 15 seconds of no motion detected. It will turn on only when it is dark and when motion is detected. ON: Working modes, the light is always on.
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity.
• Simple Mounting: The light comes with double-sided adhesive 3M pad that enables you to stick it on a cabinet or on the wall as you prefer.
• Multiple Occasions: Broadly applied to multiple occasions include hallway, bathroom, kitchen, bedroom, living room, closet, wardrobe, cabinet, basement, stairs, corridor, etc. If you're not completely satisfied with your purchase, please feel free to contact us, we provide 100% Money Back and ONE YEAR Guarantee. Please enjoy this absolutely risk-free purchase right now!

• Ideal Lighting - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Easy Installation - Simple to install, no hard-wiring. With double-sided adhesive pads and built-in magnet, you can stick on anywhere you like
• Warm Prompt - Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

User questions & answers

Question:	How easily can this be removed? If I decide to take it down, will the tape leaves marks on my wall
Answer:	I put mine about 6 inches from the floor of the landing in my house. During the day the light doesn't come on, but I noticed that if you are standing close to the light it will come on because of the shadow from my legs. But this is a great item.
Question:	I want to cover the light sensor with electrical tape so that the motion sensor works when there's light... how difficult to access the light sensor
Answer:	It's 120 degrees.
Question:	Will it turn on if placing inside the closet but the bedroom light is on
Answer:	It does not come with batteries
Question:	Didn't work for me in complete darkness after installing batteries, what am I doing wrong? And what is the metal disk for
Answer:	It takes two AAA batteries. I have this light and another type which has a rechargeable lithium battery and I prefer the rechargeable because I don't have to keep a supply of AAAs on hand.

Product features

PIR Motion & Light Sensor

- Sensitivity : 10 feet Distance

- Sensor Range: 120 degrees

Super-bright LED Bulbs

Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark

Battery Operated

- Need 3 AAA Batteries.

- Tip: Twist to remove the cover.

• Automatic Sensor: Auto-on within 10 feet, auto-off after 12-17 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected.
• 10 LED & Super-Bright: With 10 LED in each light, AMIR motion sensor lights provides enough light to make sure you never stumble in the dark. Fantastic energy saving and environmentally friendly ensure an extra long life for your light.
• Simple Installation: An adhesive strip with magnetic fields is easily attached to and detachable from the lamp body. No tools, screws or nuts are required.10 pcs bright warm white LED, energy-saving and environment friendly.
• Battery Operated: This AMIR Motion Sensor LED Light is Powered by 4PCS AAA batteries (not included). Amir smart sensor chip with passive infrared technology, reliable performance and high sensitivity, accurately detect your movement.
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light.

User questions & answers

Question:	I bought a box for the cabinets in my new house. Only 1 light out of the 3 works, fresh out of the box! Can I get replacements
Answer:	There is a magnet that you tape to wall. the back of light also has a magnet. Can lift off to change battery easily. I haven't tried to take magnet off the wall, I'm sure goo be gone would work fine though. Light works great!! I'll be buying more of these!!❤️
Question:	how far you can control that
Answer:	Why would you need it on if there's light????
Question:	What is the difference between the 10 led and 6 led
Answer:	Not positive but I have one in my garage that will turn on even when the garage door opener light is on.
Question:	Will my dog turn these on
Answer:	Dear friend, because this is motion sensor light,please check whether you install 2 lights too close? If you install 2 lights too close from each other. The lighting may cause the other one does not work.

• 3-MODE SMART ILLUMINATION - The LED night light is designed with 3 working mode (ON/ OFF/ AUTO). When it’s switched to auto mode, the light will automatically light up when motion is detected, auto-off after 20 seconds of no motion detected. Besides, switch it to ON for normally on mode when consistent lighting is required. What’s more, switch it off to save power.
• RECHARGEABLE BATTERY - This AMIR Motion Sensor LED Light is Powered by Built-in rechargeable battery, you can charge it via a USB cable, or USB port. It can work up to 3.5 hours in ON mode after charging about 2 hours.
• BRIGHTNESS ADJUSTABLE - The motion sensor light consists of 6 high-brightness LED bulbs, with 2 different brightness levels (High/ Low), you can choose the desired one by switching the button.
• 2 EASY INSTALLATION MODES - The stair light is easy to install. It could directly attached to any ironwork surface with the built-in magnet. Or stick the double-sided tape on the iron sheet, and then stick the iron sheet on any surface, no any tools are needed, safe and convenient to use.
• WIDELY APPLICATION: Sleek and stylish appearance make this step light with motion sensor an ideal for outside, indoor or home lighting. This LED Light works great for bedroom, hallway, washroom, kitchen, balcony, corridor, stairs, dark closets, backyard, cabinets, etc.

User questions & answers

Question:	what is the sensor angle
Answer:	I had the same problem.
Question:	How many brightness levels do they have
Answer:	Auto-on within 10 feet, auto-off after 12-17 seconds
Question:	how many modes do they have
Answer:	It is 10 lights versus 6 lights. These work amazingly in our closets and activate as soon as we open the door. The only drawback is the adhesive that attaches the light to a surface does not last. My solution was to get a strip of velcro and replace the current magnetic strip on these lights. Hope this helps
Question:	Do you take these off of the wall to charge with the USB
Answer:	yes, this light also can turn on by dog motion