13 best wavetek multimeters

Product description

BONUS: Add B07WQ21YMY to cart and enter code DWU9IJAQ, recieve 10pcs test leads with alligator clips for only 5.38.

Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

• Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
• Display: True RMS, 6000 counts, 3 5/6 digits
• Overload Display: Display OL
• DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
• DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
• AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
• Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
• Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
• Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple

• WIDE APPLICATIONS - KAIWEETS digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC voltage, AC/DC current(DC is the default), resistance, continuity, frequency, capacitance and diode, liquid temperature, wire on-off, Battery checking. This advanced tester can diagnose automotive, industrial and household electrical issue.
• EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging.
• SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage
• AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Will we be able to add a bluetooth upgrade to our meters since it indicates an updated meter will have it and it also has the symbol
Answer:	Yes
Question:	How long is the warranty
Answer:	No not good driving gloves
Question:	Just wondering if you ship this item to Australia
Answer:	I used these gloves and my hands did not get wet.
Question:	where can i buy replacement fuses? I love this meter but blew the fuse
Answer:	You can make a fist and I've used them for general cold weather yard work, but the gloves take away fine motor skills. Gripping a hammer would likely not be a problem. Holding a nail might be slightly more difficult.

Product features

Kaiweets HT118A Digital Multimeter

An advanced multimeter designed to be used safely and accurately by electricians at work places or homeowner and DIYer who need more capabilities than the standard measuring tool.

* Light up the terminals: LED indication light as input terminal guidance

* CAT III 1000V, CAT 600V safety rating

* Double insulation, robust outer case

* Includes test leads, K-Type thermocouple, batteries and user manual

Sensitive Continuity Test

Loud buzzing sound

Resistance < 30Ω, green light

Resistance between 30Ω to 60Ω, red light

2.7 inch Display

Display turns to orange when voltage is over 80V.

Large, clear digits

bar graph

Low battery indicator

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Maximum Safety

Dual fuse

Dual PTC thermistor

Intelligient Anti-Burn

Overload protection on all ranges.

Product description

This automatically ranging digital Multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, test diodes and continuity. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

• Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 40M resistance plus temperature, capacitance, frequency, duty-cycle, test diodes and continuity
• Digital Mulimeter has CAT IV 600V / CAT III 1000V safety rating
• Built to endure a 6.6-foot (2 m) drop and withstand daily wear and tear on the job site
• Low battery indicator and easily accessible battery and fuse replacement compartment
• For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations

User questions & answers

Question:	Range of uf
Answer:	From Instruction Manual Pg. 4, "Electrical Specs": Capacitance (Auto-Ranging) 40.00 nF - 4000uF. Tip: Type "Klein MM700" into Google and choose Klein's website to see all the Spec's for the MM700.
Question:	Will it check dc amperage
Answer:	Yes. The meter will ALWAYS give you a LEADS warning if you switch to current measurement. This is to remind you that you need to relocate the red lead to one of the current jacks. Unless you are sure you are measuring micoamps or milliamps, start with the 10A jack.
Question:	Does this dmm have a function for testing transistor hfe? i do not see it so i assume no
Answer:	You assume correctly. There is no dedicated transistor test function on this meter.
Question:	Que incluye
Answer:	Estuche, cables y baterías!!!!

Product features

Digital Multimeter, Auto-Ranging, 1000V

This automatically ranging digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, test diodes and continuity. Exclusively designed from the ground up by electricians for electricians.

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

• 【100% Safety Assurance】Built-in Double Fuse. Overload Protection on all ranges.
• 【Auto-ranging Tester】Accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, etc.
• 【Backlight Display】 Designed with 3 1/2 digit LCD display and 'Backlight', showing the reading clearly in low light areas.
• 【Special Points】 Data Hold, Maximum Value Hold, Function Switching, Auto Power OFF. Sampling Speed: 3 times per second.
• 【9V Battery】DON'T forget to install the 9V battery before using the digital multimeter, or it will go on strike.

User questions & answers

Question:	Is the unit truly auto-ranging? i see a "range" button on the unit pictured
Answer:	Yes
Question:	What batteries does it use
Answer:	9v battery. It does come with it. You will have to install.
Question:	For a hobbyist, why would I not buy a $20 multimeter vs something
Answer:	Fora hobbyist the really cheap meters are the best because sooner or later one will test something that will ruin the meter. This meter is really an intermediate meter which is above the hobbyist stage but still below the professional stage. An no, buying a Krug doesn't make you a professional.
Question:	Does continuity test produce a beep
Answer:	Yes. Turn dial to diode setting and press FUNC once. Beep is plenty loud. Great meter for the price.

Product features

Technical Specifications:

1.DC Voltage: *200mV/2V/20V/200V ±(0.5%+2) *600V ±(0.8%+2)

2.AC Voltage: *2V/20V/200V ±(0.9%+3) *600V ±(1.2%+3)

3.DC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+3)

4.AC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+4)

5.Resistance: *200Ω/2kΩ/20kΩ/200kΩ ±(0.8%+2) *2MΩ/20MΩ ±(1.0%+2)

6.Frequency: *20kHz ±(1.5%+5)

7.Power Supply: 9V Battery (6F22 or 1604A Type)

8.Safety Class: IEC 61010-1, CAT II 600V

AC/DC Voltage Test***

Battery Test***

Resistance Test***

Backlight LCD

3 1/2 digit LCD display provides clear display. And 'Backlight' can help show the reading clearly in dark areas and at night.

Data Hold

If you want to record the measurement value, just press the 'Hold' button, then the reading showed on the screen will be locked.

Full Support

Foldable stand for hand free use. ​Just open up the support stand, the multimeter can be propped up stably.

Overload Protection

Built-in Double fuse can protect the multimeter effectively. Overload Protection on all ranges.

• ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and more.
• TROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all ranges
• EASE OF USE: Data hold and large digital display with backlit LCD for visibility in dimly light areas; Sampling speed: 2x per second
• 1 Year Warranty. Built-in kickstand for hands-free use. Protective rubber corner guards for drop protection
• NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing

User questions & answers

Question:	which setting is for volts, and which is for ac
Answer:	The V with the two lines is DC volts and the line with the squiggly line is AC volts.
Question:	is the continuity test audible
Answer:	Good question. and I can't find an answer it doesn't say but in the picture when it's showing someone testing continuity it shows that it's beeping what it doesn't say that it does beat and we've got two people on here that say it does not and two people that say that it does so good luck I'm looking for one that is audible myself why all multimeters don't have an audible noise when you have continuity I will never know either that or you can have one that has a paper thin needle that jumps and you can't see it and you have to take your eyes off of what you're working on to see if you have continuity and when you move your head you lose contact and it's such a pain in the ass
Question:	Is this unit protected by a fuse? If so, is it replaceable? My last meter was fused but it was soldered. I couldn't easily replace it
Answer:	I had to replace the ammeter fuse (because I forgot to switch the hot (red) test lead from the left side to the middle, before testing my car's battery voltage). That fuse is 10A 600V. I looked around for those & couldn't find them, but found 10A 250V and these worked OK. They're 20 x 5 mm ( .2 x .79") ceramic fast-blow. https://www.amazon.com/gp/product/B07JFDTTMJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Question:	Can this handle being plugged into a wall socket? Also, can someone give a walkthrough of how to safely test a socket
Answer:	plug the red lead into the meter socket marked COM and the black into the center meter socket. Set the dial to V~ (for AC volts) on the 200 scale (for household current) insert one probe lead into each of the wall socket's vertical slots and move them around a bit inside the outlet slots to make sure you're getting a good connection, if in doubt plug a lamp or something into the socket. If you suspect the outlet socket itself has failed carefully remove the wall plate in order to access the actual wires connected to the outlet to be sure it's either a dead circuit or the outlet itself has failed.

Product features

AstroAI Digital Multimeter

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Dual Fuse

Double Fuse Protection, more secure and reliable; This multimeter is designed with safety in mind. Overload protection on all ranges.

Backlit LCD

Large digital display with backlit LCD for visibility in dimly light areas.

Data Hold

When taking measurements and recording results, it is often easier to use the data hold function to freeze the data being displayed on the digital display.

Low Battery Indication

You can quickly know to replace the battery and continue working. so you never accidentally run out of juice.

Open Support Stand and Protective Rubber

Built-in kickstand for hand free use. Protective rubber corner guards for drop protection.

• WIDE RANGE of tests for AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, Frequency and Temperature; Tests Diodes.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage.
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Kickstand, and Low Battery Indicator make taking and recording measurements easier than ever before.
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities.
• SAFETY FIRST: Two integrated fuses rated at F500mA/600V and F10A/600V; Explosion-proof ceramic fuses provide maximum safety; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI.

User questions & answers

Question:	Will this meter measure frequencies on a sensor with specs between .114hz and .152hz
Answer:	Hello Customer, Thanks for your concern, yes, this meter can read frequencies between .114hz and .152hz. AstroAI Customer Support
Question:	Do this multimeter comes with a case, if not do anyone where can i buy one
Answer:	no it doesn't come with a case
Question:	are there test leads with aligator clips available for this meter? if so where
Answer:	Test leads with alagator clips do not come with the meter, but a set with alagator clips are available on Amazon that should work. I hope this helps.
Question:	Is it possible that the leads supplied with the meter don't plug into the front of the unit? Mine seem too large in diameter to push into the ports
Answer:	After removing the caps they are flimsy and you might have to wiggle to get the center connector aligned before pushing all the way in.

Product features

AstroAI 4000 Counts True RMS Digital Multimeter

The AstroAI multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything.

Trouble Shooting with Maximum Safety

AstroAI multimeters are professionally designed to troubleshoot electrical problems or just for electronics training.

Intelligent Anti-burn and Double Protection

Built-in F500mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; This multimeter is designed with safety in mind. Integrated fuses protect users of all skill levels.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Backlit LCD and Data Hold

Large digital display with white backlit LCD for visibility in dimly lit areas; It is often easier to use the data hold to easily read and record data.

Low Battery Indication

Never run out of battery with a notification letting you know exactly when to replace the batteries.

Automatically Shut Off

Conserves power by automatically shutting off after 15 minutes of inactivity.

Full Support and Always Protected

Open up the support stand to prop up the multimeter and make reading measurements easier. The rubber sleeve ensures that the multimeter is always protected from wear and tear while on the job.

• 【Multimeter Test Leads Kit 】Test lead x2, Threaded Safety alligator clips x2 ,Threaded alligator clips x2, two different color (black, red)
• 【More secure and durable silicone string】Two PVC insulation lead wires with two threaded probe tips Constructed with flexible PVC/PA material that is double-layered and -insulated.The silicone used is non-toxic,environment friendly and meets both the UL and RoSH standards.Using high quality materials ensures that the test leads are durable,flexible as well as having properties like freeze resistance and heat tolerance.
• 【Compatibility】The test lead wire - 40 inches ,test lead length- 47inches,Shrouded 4mm banana plugs- ends test lead (accept 4mm banana plug tip) Bullet Point
• 【Quality clips】 Threaded Safety alligator clips' jaw opening is 0.5'', Material: nickel plated brass clip,glass filled nylon housing (Safety alligator clip dimensions 49mm x 10mm x 7mm). Threaded alligator clip: 8-32 threaded barrel connection, Jaw open 0.31” (7.9mm) Max, Material: nickel plated steel, Rating: 10 Amps (Threaded alligator clip dimensions 65mm x 20mm x 20mm)
• 【Certificate / Guarantee 】International Electrotechnical Commission (IEC) certified for category III installations up to 1,000V, HIGH QUALITY.18-month warranty and 24/7 customer service, and we will resolve your issue within 24 hours.

User questions & answers

Question:	These leads seem to have a plastic cap inside of the female bananna connector. are they not comptible with an amprobe multimeter
Answer:	These leads would not fit my old multimeter.
Question:	Will it fit uei
Answer:	Yes i believe it will fit from the images of the unit
Question:	Will these fit my klein cl
Answer:	Dear buyer, Yes, it's will be fit. Thanks
Question:	Can you get 4mm threaded inserts for the safety alligator clips? being able to screw them on the test leads would make them more usefull
Answer:	I don't think so. The ID is about the same as the "regular" alligator clips, just no threads. I thought this was a pretty useless design. I actually purchased these because I thought I would be able to use the Safety Clips. They are virtually unusable. I missed the photo the vendor included in the listing. The leads, however, are pretty good for the price. Not as nice as Simpson or Fluke leads, but they are also 1/4 the price. I would say 1/4 the price if a good Fluke set at 3/4 the quality.

Product features

Test Lead set 3 different tools

The test lead wire - 40 inches , test lead length- 47inches, Shrouded 4mm banana plugs- ends test lead.

Two PVC insulation lead wires with two threaded probe tips Constructed with flexible PVC/PA material that is double-layered and -insulated.The silicone used is non-toxic,environment friendly and meets both the UL and RoSH standards

Threaded alligator clip: 8-32 threaded barrel connection, Jaw open 0.31” (7.9mm) Max, Material: nickel-plated steel, Rating: 10 Amps

Threaded Safety alligator clips' jaw opening is 0.5'', Material: nickel-plated brass clip,glass-filled nylon housing

Threaded probe tip

The threaded alligator clip will be perfect fit with threaded probe tip.

Threaded Safety clips

High- quality Safety alligator clips' jaw opening is 0.5'', Material: nickel-plated brass clip,glass-filled nylon housing.Rating: 10 Amps

Multimeter use

The test lead fit for most of multimeters with 4mm banana plug tip.

Circuit test

Test lead set connects a compatible electrical test meter to a device for testing. Use a very wide range for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing.

Product description

Do It All, and Then Some The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs. Built for Everyday Use A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job. Specifications Safety/Compliance: IEC61010 CAT. I 600V, CAT. II 300V, double insulation ax. Display: 1999, 3 1/2 digits Range selection: Manual ranging Overload display: Display OL Sampling Speed: 3 times per second Power: 1 x 9V 6F22 Battery Included (Low Battery Indication) Diode Test: Yes Continuity Test: Yes Square Wave Output: Yes Dimensions: 5. 1" x 2. 9" x 1. 4" DC Voltage: 200mV/2000mV/20V/200V (0. 5%+2), 500V (0. 8%+2) AC Voltage: 200V/500V (2%+10) DC Current: 2000A/20mA (1%+2), 200mA (1. 2%+2), 10A (2%+5) Resistance: 200 (0. 8%+5), 2000/20K/200K (0. 8%+2), 20M (1%+5), 200M [5%(reading-10)+10] Package Includes 1 x Etekcity MSR-R500 Digital Multimeter 2 x Test Leads (pair) 1 x GP Supercell 6F22 9V Battery 1 x User's Manual

• ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
• EASE OF USE: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas. Built-in support stand allows for hand free use
• SAFETY PROTECTION: The multimeter has overload protection on all ranges. Protective rubber sleeve around the multimeter adds extra drop protection
• BUY WITH CONFIDENCE: 2-Year Warranty (1-year buyer assurance and a free option to extend it by 1 more year). Feel free to contact us and we are ALWAYS READY TO HELP if you have any questions
• NOTE: This multimeter cannot be used to test AC current! Please make sure the rotary switch is located at the right range during use

User questions & answers

Question:	Does the volt meter itself ever need recharging
Answer:	You have to replace the battery at some point!Maybe soon if you leave it on!
Question:	could this measure down to say 0.1 ohms
Answer:	If you really need to measure extremely low resistances accurately, you can get a power supply that you can set for a constant current of 1A, and put it through your test load. Then put your meter in the DC millivolt range and read across the load. It will display the resistance in millohms, so a reading of 100 mV would correspond to 0.1 ohms. Few people need to measure such small resistance values, but some specialized things like coils and inductors have test specifications down in those ranges.
Question:	Help. i have a short or bad ground somewhere in my automobile, battery and alt new - i think wires going to the pcm. will this help identify? thanks
Answer:	This is called a parasitic draw and a multi step process can isolate it down to a single component. You start with checking the draw on the battery. Remove the negative terminal and set the meter to 10 AMPS with the black lead plugged into the the COM connector female on the bottom and the red plugged into 10 amp female on the far left. Clamp the black lead to the negative battery cable connector that you removed and touch the red lead to the negative terminal. If you get a reading higher than a quarter of an amp you the battery is discharging and depending on the draw it will run down over night. A tip: Make sure everything is off in the car by closing the doors and removing the bulb from courtesy engine compartment light. If the bulb is inaccessible just duct tape the switch down. Also if you entered the car to pop the hood you should wait for the computer to go back to sleep - about 20 minutes - before running the test. If there is a draw you should start isolation by pulling fuses - when you pull the right fuse the reading will drop to 1/4 amp or so. The fuse fronts a wiring harness bundle and you can see what circuits it is protecting on a schematic - first thing to check are switches on the bundle and any after market additions to the harness. Most times it will be an open switch but a poor installation of additional lights or accessories is also a high suspect spot for a short. If a switch replace it or even just open it (turn it off). If a short you need to isolate the individual circuit on the harness bundle. Short isolation is a difficult time consuming task and rather than describe it I recommend that you watch this video on YOUTUBE. It is the best I have found for going all the way to the source of a short. Second tip is to have a helper with the fuse pulling and remember that some vehicles have 2 or 3 fuse boxes. GOOD LUCK, this is time consuming but not rocket science. https://www.youtube.com/watch?v=q5zLxD74r20
Question:	Does it have a beep function to check connections
Answer:	If you're referring to the Testing for Continuity function -- yes. "The buzzer sounds if the resistance of a circuit under test is less than 70 ohms".

Product features

Do It All, and Then Some

• The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use.
• The manual range dial makes it easy to select a range to measure current, voltage, and resistance-perfect whether for new electrical engineering students or pros who prefer setting the dial.
• It also comes equipped with a continuity buzzer to ensure your electrical components are still in working condition.
• Other features include a low battery indicator, overload protection, removable test lead extension caps, and a tough rubber sleeve to protect it from drops that may happen while on the job.

Hold It

Data hold function keeps measurements on the large display while you record them.

Light It Up

The display backlight makes it easy to read measurements in dark areas and at night.

Full Support

Open up the support stand to prop up the MSR-R500 and make reading measurements easier.

Always Protected

The rubber sleeve ensures that the multimeter is always protected from wear and tear while on the job.

Automotive Maintenance

Properly test fuses, wiring, and even your battery to ensure everything is in order for your next road trip.

Hobby Electronics

Test circuitry on hobby aircraft or wiring on LED strips for your next big project.

Home Electrical

Diagnose faulty wall outlets, dead batteries, and even circuit boards. on appliances to keep your home up and running.

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

• [All Button Design]: All button (no switch) design for easy single-hand operation, switching function is fast and convenient.
• [Large Screen 3 Line Display]: Large screen triple line display can show 3 test results on the screen, such as voltage, frequency and analog bar.
• [9999 Counts True RMS Multimeter]: This 9999 counts TRMS auto-ranging multimeter can measure temperature, capacitance, diode, continuity, NCV (non-contact voltage detection), Ohm, Hz, duty cycle, AC/ DC voltage, AC/DC current, etc.
• [EBTN LCD Display Technology]: EBTN (enhanced background twisted nematic) LCD display greatly enhance the reading experience, the lighted up numbers & letters with black background make it very easy to read, even in bright sunlight or poor light.
• [Protective Case]: It features a protective case for protection against shocks, friction and bumps.

User questions & answers

Question:	is there an owners manual instead of a mini disc that can be kept with meter in tool bag that is readable with out a magnifying glass
Answer:	Corn and Dairy free
Question:	Wires are included
Answer:	I would not think so. It is used to help prevent macular degeneration. It is the equivalent of ocuvite and you can Google that to see if there is any mention of dry eyes.
Question:	Does this unit have overload protection
Answer:	I can't give an answer to can it cause burping, all I can say is it has never caused me to burp and I have been using it for over two years.......................................
Question:	Does the AM-530 come with the misspelled "Contrator" under the display as shown in the product photos
Answer:	It is likely NOT soy or gluten free. I tossed this product after it was delivered because I didn't see before I ordered it that it contains artificial coloring. Then & there I decided not to buy a "store brand" supplement again because of the cheap ingredients they use. I decided I was worth the extra $ for a quality (pure/organic) supplement. Good luck :-)

Product features

Amprobe AM-530 TRMS Electrical Contractor Multimeter

The AM-530 True-rms Multimeter is the fully-featured choice for the professional electrical contractor. Measure and verify presence of voltage to connect equipment or to perform repairs, run new wiring, check continuity of electrical connections, identify blown fuses, troubleshoot motors or check transformers. The AM-530 is true-rms sensing to accurately measure voltage on systems affected by harmonics as well as a built-in flashlight to detect wire colors in the dark and non-contact voltage detection.

Packed with Features

The AM-530 multimeter comes with a set of detachable test leads that measure AC/DC current to 10 amps, AC voltage to 750V, DC voltage to 1,000V, resistance to 40 megaohms, capacitance to 4,000 microfarads, frequency to 10 megahertz (MHz), and microamps. The meter comes with a K-type thermocouple probe for measuring temperature. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit.

Perfect for Electrical Applications

The AM-530 can be used for installation and troubleshooting of electrical wiring, motor maintenance and installation, analysis and troubleshooting of other electrical loads (electrical heating systems, transformers, light systems).

Non-contact voltage detection enhances safety

The AM-530 features a built-in flashlight to see wires and fuses in the dark, a rubber tilt stand and probe holder to give you the 'third-hand' you need while taking measurements.

What’s In the Box?

AM-530 TRMS Electrical Contractor Multimeter

Set of Test Leads

K-type thermocouple

9V 6F22 battery (Installed)

Velcro strap

Carrying Case

User manual

Amprobe builds rugged, reliable test and measurement tools

Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

Product description

The Klein Tools Test Leads are intended for use as replacement test leads for meters that have standard, banana-type input jacks. They feature removable alligator clips that attach to wires and other conductors. These test leads are part of a full line of Klein Tools meters and testers, designed by electricians for electricians. Leads are 41-Inch long. Has universal test leads and alligator clips. CAT IV 600 V and CAT III 1000 V safety rated. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Standard banana-type inputs compatible with most multimeters and clamp meters
• Removable alligator clips attach to wires and other conductors
• Includes one pair of universal test leads and one set of alligator clips. Leads are 41-Inches (1,041 mm) long
• Safety Rating: Category III 1000V and Category IV 600V
• Leads compatible and fit lead storage compartment on most Klein test and measure products

User questions & answers

Question:	Will these work with a TP1803D rectifier
Answer:	Thanks for your inquiry. This chair is 28.10 in. wide. Thanks.
Question:	Do these work with the Klein MM
Answer:	My husband and I both weigh over 200 and these chairs held us very well all through last summer. We are avid beach goers so they were used a lot! The recommended weight limit is 275.
Question:	Do these work for a uei dm383b digital multimeter? thanks
Answer:	When laid out about 10 inches - have received many compliments on the quality and utility - love the opening for lying face down - the open is covered with a Velcro flap when you want to lie on yr back. Head cushion too. Recommend
Question:	Will this work with a Craftsman
Answer:	Hi， thank you for your question, and sorry the folding beach chaise lounge doesn't have backpack straps, but it does have handles on side, which allows you to carry easily.

Product features

Replacement Test Lead Set, Right Angle

The Klein Tools Test Leads are intended for use as replacement test leads for meters that have standard, banana-type input jacks. They feature removable alligator clips that attach to wires and other conductors. These test leads are part of a full line of Klein Tools meters and testers, designed by electricians for electricians.

• WIDE APPLICATIONS: This AstroAI digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC Voltage, Current, Resistance, Continuity, Capacitance, Frequency, Diodes and Temperature. This multimeter is a really useful tool for solving industrial and household electrical issues.
• LED INTELLIGENT JACK: Switch the dial and the LED lights on and the jacks will shine accordingly. Switch the dial to choose the function you need, the corresponding LED light flashes to tell you which jack you should choose. A large LCD backlight display and flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTIFUNCTION: Features smart functions, Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging, Backlight and Flashlight. The LCD screen changes to red while detecting live wires, and the backlight turns orange when measuring high voltage.
• NON-CONTACT Safety: This DMM is designed with safety in mind. It features non-contact voltage testing and Live function with sound and light alarm, works for outlets, sockets, terminals, and more in safety.
• SAFETY FIRST: Anti-Burn with a double ceramic fuse and thermistor protection circuit; The fuses can protect the multimeter effectively; There is overload protection on all range. The silicone protective case effectively prevents the machine from damage. 3 Year Warranty provided by AstroAI

User questions & answers

Question:	Once backlite is on how long does it stay on
Answer:	it has a short time out...the meter will shutoff after 15 minutes -no activity. The BACKLIGHT is a toggle on/off
Question:	What is the difference between the older part wh5000a/dm6000ar and this part number m6k0r
Answer:	The new model M6KOR has an NCV function and optimized the design, and it uses 1.5V*2 AA batteries instead of a 9V battery. Please refer to the product detail pages to view more details. Please contact us via Amazon Message with your request. We will be glad and prompt to help you there.
Question:	Hi. What's the range and accuracy of the capacitance measuring of this meter
Answer:	The range of the capacitance is 10nF-100mF. The accuracy of the capacitance is ±(4.0% rdg +5 dgts) between 10nF and 1000μF, the accuracy is ±(5.0% rdg +5 dgts) between 10mF and 100mF. Please contact us via Amazon Message with your request. We will be glad and prompt to help you there.
Question:	Couldnt find this product on the astroai website. can you provide a link to more product model info including the user guide
Answer:	We're sorry that we are updating the information and user manual of this multimeter on our official website/product detail page. Please contact us via Amazon Message with your request. We will be glad and prompt to help you there.

Product features

AstroAI 6000 Counts TRMS Digital Multimeter

The AstroAI M6K0R model Multimeter is designed to be safely and accurately used for a variety of automotive and household electrical problems. The device is a fully automatic TMRS multimeter and measures both alternating and direct currents and voltages. Apart from the above, the device can also measure capacitance, temperatures, diodes, liquid temperatures, and circuit continuity. This all on one multimeter is perfectly used for general electronics as well as electrical troubleshooting

AC/DC Voltage Measurement

Contact the probe to the measured circuit to measure the voltage or current. Read the measurement result on the screen; when measuring AC voltage or AC current, the frequency is displayed on LCD simultaneously.

Live Wire Detection

Live wire testing with the red test lead. The unique function to test the presence of live wires. When it detects the live wire, the multimeter will reflect with a red indicator light and audio alarm.

Continuity Test

How to test whether the circuit is connected. Connect the test leads to two points on the circuit, if the line is connected, the built-in buzzer will sound and the value will be displayed on the LCD screen.

Temperature Measurement

This product is equipped with a K-type thermocouple, touch the end of the thermocouple to the object being measured, read the temperature when the value has settled.

Low Battery Indication

An indication to replace the battery will be given when the battery is low. Easily replace with two AAA batteries.

Auto Shut Off

Automatically shuts down after 15 mins of inactivity for an extended period to save power. Just switch the rotary dial to easily get it working again.

Bright Backlight and Flashlight

The bright backlight enables the readings to be clearly visible on a large LCD screen; even in dimly lit areas and at night, the flashlight is as bright as a little lamp and provides illumination in the dark.

Anti-Burn Dual Fuse Protection

Built-in double fuses protect the multimeter effectively and provides overload protection across all measurement ranges. Double Protection and a high safety level.

• plastic insulated – for user safety
• very easy to open jaws (with only two fingers).
• alligator clip easy to connect multimeter test probe
• 4 x test alligator clip (red + black)

User questions & answers

Question:	Is it fit Klein test lead
Answer:	It is AReds2.
Question:	are these push in or screw on clips
Answer:	They did change 2 of the ingredients! Vitamin E was 200 IU, now 90 mg, and copper was1mg , now 0.7 mg. The rest has stated the same. Hopefully they return to the original ingredients as they were exactly as Areds 2 !!