11 best ohm meter with capacitance tests

• 【2000 Counts Auto Ranging Digital Multimeter】 Wide Application: It Can Accurately Measure AC/DC Current Voltage, Resistance, Capacitance (4-2000uF), Frequency (1kHz-200kHz), Continuity
• 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
• 【Measure Safety, Over Load Protection】 Safety Class: IEC 61010-1, CAT II 600V. Provide You Strong Security During the Working
• 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free
• 【What You Get】 1 x High Quality Multimeter, 1 x Test Probes Leads, 1 x Alligator Clip Leads, 1 x 6F22 9V Battery, 1 x User Manual

User questions & answers

Question:	Owner's Manual totally useless! Print is so small a magnifying glass is no help. What is hotlink to larger print manual online
Answer:	No pockets on the inside
Question:	Can I calibrate the device to ensure continued precision or do I have to send it back to the manufacturer for calibration
Answer:	Keep in mind that this is just my opinion. Yes, I do believe that they would fit over snowboard boots. My husband wears his over barn boots and there is still plenty of room. That being said, I'm not sure you'd want to wear these snowboarding. They are super warm, heavy, work-quality type clothing. Enjoy the mountain!
Question:	What are the dimensions of the multimeter itself
Answer:	If you plan on wearing clothes under I would go with 44x30's..I wear 36x30 and went up to 38 and they were tight and to long..
Question:	When i put on dc the numbers go up and down and wont go to
Answer:	Like a black and red plaid checker type.
Question:	Is it compatible with a Firex 120-1072B
Answer:	Not sure what the length of the sleeve is but husband is 5'10 and the sleeves may very well be long enough for one that is 6'1 hope this answers your question
Question:	Picture does not look like the ka-f quick adapter. does the picture show what will be shipped
Answer:	The tag says 100% polyester lining and insulation. It is a quilted type lining and is not super heavy. They are great for working in and doing chores, and are not as bulky/stiff as Carharts.
Question:	Does this adapter work with the Firex
Answer:	I believe they are 34" long
Question:	Is the adapter compatible with Kidde P
Answer:	Med Long is a medium but it is longer like if you want them longer for boots etc.

Product features

Overview:

Neoteck 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. Is a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation.

Please Note:

• The automatic range digital multimeter has a large internal resistance (high input impedance), and there is induced voltage interference when open circuit. The AC DC gear will have a digital jump when it is turned on, but it will not affect the measurement.
• When turning on the meter and move the dial to ohms, it reads of OL (default), it's normal. In this case, it means that Infinity of resistance. When you apply the multimeter to test resistance of something, it start to read the real resistance. Please don't worry. There is no need to reset it. You just measure your resistor; it will give the right reading (ignore the reading of OL)

1x Test Probes Leads

1 x Banana Plug to Alligator Clip Leads

Anti-slippery Rubber Case, Anti-drop

Package Included:

1 x 8233D Pro Multimeter

1 x Test Probe Leads

1 x Banana Plug to Alligator Clip Cable

1 x User Manual

1 x 9V 6F22 Battery

Product description

The Etekcity MSR-A600 Digital Mustimeter is the perfect startup multimeter for hobbyists, entry-level electricians.

• AUTO-RANGING: Accurately measure AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance, Diode, and so on
• SAFETY ASSURED: Overload protection on all ranges. Built-in double explosion-proof ceramic fuse tubes. Reverse Polarity protection.
• HIGH PRECISION: High sampling speed (3 times/sec), enables you to confidently diagnose automotive, industrial, and household electrical issues
• CONVENIENT FEATURES: Low battery indication, Data Hold, Auto shut-off, Built-in kickstand
• BACKLIGHT DISPLAY: Large LCD display provides clear readings, and soft backlight offers visibility in dimly light areas
• BUY WITH CONFIDENCE: 2-Year Warranty (1-year buyer assurance and a free option to extend it by 1 more year). Feel free to contact us and we are ALWAYS READY TO HELP if you have any questions

User questions & answers

Question:	Will this test the capacity of a aa/aaa battery
Answer:	yes, insert the black lead in to com. and red test lead to VQmAuA, turn the dial to Q . put leads on capacitor outlets and hold til until readings stabilize, The lcd will read OC if there is an open circuit. If less than .050 check for loose connections or damaged wire.
Question:	Can i use this to test whether my ac adapter is working? thanks
Answer:	Yes, there is an audible beep when you have the meter set to continuity and the probes are placed on a conductor.
Question:	Can this be used to test capacitors in heat pumps
Answer:	Yes, this will go up to 1000V.
Question:	Does the continuity function have an audible beep
Answer:	india

Product features

Specification:

1. DC Voltage: 200mV/2000/20V/200V/600V± (0.7%+3)

2. AC Voltage: 200mV/2000mV/20V/200V/600V± (1.2%+3)

3. DC Current: 200μA/2mA/20mA/200mA/2A/10A± (1.2%+5)

4. AC Current: 200μA/2mA/20mA/200mA/10A± (1.5%+5)

5. Resistance: 200Ω/2KΩ/20KΩ/200KΩ/20M/200MΩ± (5%+5)

6. Capacitance: 2nF/20nF/200nF/2μF/20μF/200μF/2000μF

7. Diode Check: The resolution is 0.001V

8. Continuity Check: When the circuit supports electricity, the buzzer will sound off.

9. Safe Class: CAT II 600V

Large LCD Screen

Large digital display with big digits, full-scale gear symbol prompts, and unit display makes it easier to use than ever.

Data Hold

Data hold function keeps measurements on the large display while you record them.

Drop Protection Included

The rubber sleeve ensures that the multimeter is always protected from wear and tear during projects, and it even has a test lead holder for easy storage.

Improved Buzzer

An electromagnetic buzzer creates a crisp and loud alert when taking measurements.

• ⚡MULTIFUNCTION PEN MULTIMETER - Voltage Tester accurately measures AC DC from 600mV~600V, resistance from 600 ohm ~ 60M ohm and capacitance, diode test and continuity with alarm. Works well as a voltage pen type with much more functions. 
• ⚡OVERLOAD PROTECTION - BT38C pen type digital multimeter features double insulation protection, CE 600V CAT Ⅲ. Compact and high precision electrical tester for troubleshoot a variety of automotive and household electrical problems.
• ⚡DATA HOLD VOLTMETER - This pen multitester can hold the reading for you to record, Low battery indicator, Auto OFF with “Beep” warning after 15 mins without operation to save your battery. You can also press ”SELECT” to shut down Auto OFF function
• ⚡BACKLIT & FLASHLIGHT - Long press “HOLD” button on the pen multimeter to turn on bright flashlight and LCD screen backlit, Then you can accurately testing and reading in the darkness.
• ⚡100% MONEY BACK WARRANTY - BTMETER is backed by 100% guarantee to let you buy this pen multi-tester confidently. Add to Cart, use it, for any quality problems, we’ll replace you.

User questions & answers

Question:	Can i use this to test subwoofer ohms
Answer:	Yes !
Question:	Does this tester offer buzzing when testing line voltage
Answer:	Noo you only get the beeping noise when your testing impedance otherwise known as resistance(ohms)
Question:	I see people comment this is bigger than they expected. What are the measurements of this meter
Answer:	The meter is at my fathers house. I am unable to give an exact measurement. Notice the blue grip. This fits your hand. Plus 3 inches for the controls and display plus 2 inches for the meter probe.
Question:	Does it come with a carry case
Answer:	no it doesn't. Still good meter for the price.

Product features

BTMETER BT-38C PEN TYPE MULTIMETER

Thanks to the new design of a permanently attached probe, BTMETER BT-38C pen-shaped voltage multimeter can help you perfectly solve problems in circuit maintenance, HVAC system, car repair and industry. No more juggle with your two hands.

Do not hesitate. Know how easy it could be, when you get into trouble of power failure, short circuit or any other unexpected situations.

One Hand Operation

One test lead attached to the portable unit, BT-38C enables you to operate in one hand. No need to find a place to set meter down. Can easily select functions with just 2 fingers!

Anti-Drop Rubber Grip

Built with high quality silicone handle, firmly hold the digital volt meter tester, when checking A/C systems, cars, TV sets, lights and circuits in labs, factories and home.

Heavy Duty Test Probe

Fully fitted with protective caps can protect the test leads stays SHARP & POINTY! Provide safer using experience and extend its service life.

Lamp Light for Darkness

Equipped with a lamp light in the front, this electric checker can help you to see the measured spot clearly in dark. Or press “HOLD” to freeze readings.

• 【6000 5/6 Digital Multimeter】LCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range.
• 【Extensive Multimeter】With this autoranging multimeter, it not only measures AC/DC Voltage and Current, Resistance, Frequency, Duty Cycle but also Temperature, Analog Bar.
• 【Safety Security】Low Battery Voltage Indication, Overload Protection on all ranges, Data Hold Function, all these special features provides you secure and convenient testing.
• 【Protective Rubber Sleeve & Stand】Provide protection against knocks and bumps; Built-in support stand for hand free use; Test Probes Slot to place and keep the test probes.
• 【Test Leads & Multimeter Carry Bag】Includes two AAA battery , a pair of test leads & K-type temperature probe, a Carry Bag for portable multimeters carry and keep.

User questions & answers

Question:	Does it have a backlight display
Answer:	Thanks for your asking. For our Proster Auto-Ranging Digital Multimeter, LCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range. We are sorry this Multimeter can't connect to PC. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	Dose the LCD have back light
Answer:	The smallest wires that I’ve tested are thermostat wires
Question:	Can it measure 900 degrees temperature
Answer:	They're the same size, both can measure AC DC volt, current, resisitance, capacitance, Frequency, duty cycle Diode test, Continuity, Data hold, Auto backlit, Auto power off, NCV, Relative value.. But there're more functions works on BT-39C only, such as: #1Temp Test(-4 to 1832 degrees F), #2 Battery test(1.5V/9V), True RMS, #3 BT-39C come with 9V battery, and 39K is 1.5V*2pcs Hope this answer helps
Question:	I see a rs232 symbol on the top left of the screen. is this unit connectable to a pc
Answer:	The multimeter BT-39C has an on-off beep function, which can assist the user in testing and judging. The meter also has an NCV function that emits a beep and flashing warning light during non-contact voltage testing.

Product features

Proster Auto-Ranging Digital Multimeter 5999 2000uF, relative value measuring, max/mini value measuring, auto/manual range.

Proster VC99 3 5/6 professional digital multimeter holds functions of measuring DCV, ACV, DCA, ACA, resistance, capacitance, frequency, temperature, duty cycle, transistor, diode, and continuity, etc.

It also can provide special functions including analog bar, unit symbol display, data holding, relative value measuring, maximal/minimal value measuring, auto/manual range switching (RANGE), auto power off and warning alarm.

Multifunction -- Low Battery Voltage Indication, Overload Protection on all ranges, Data Hold Function.

Comes wtih Carry Bag, it is very convenient to carry and keep.

Proster multimeter can make you test faster, safer, and easier.

Test Probes Slot

It is very convenient to place and keep the test probes.

• High Accuracy Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT!), AC/DC Voltage, Capacitance, Resistance, Diode and Continuity Tests.
• Large Jaw Design and Mini Size: Jaw opening measures AC current in a conductor up to 26mm without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces
• Multi-Function: Data Hold, Max Reading, Low Battery Indication and NO operation in 15 minutes the ammeter automatically enters sleep mode.
• Two-Color Backlit LCD Display: When the voltage > 80V, the current is> 3A, the LCD backlight screen turns orange to warn you of high voltage. The backlit LCD display also helps you to see the reading clearly in the dark.
• Safety and Service: Safety standard IEC 61010-1 and is rated for CAT III 600V. 3-Year service and lifetime support, 7/24 Customer Service.

User questions & answers

Question:	Can I use this to measure the voltage on my car battery
Answer:	Voltage yes.
Question:	is this meter a true RMS
Answer:	Hi, HT200B is not true rms meter. There is fuse protection while reading continuity if voltage is present.
Question:	Does it have an audible beep for continuity
Answer:	It does have an audible beep for continuity and the LED lights up.
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	They sell a gizmo that you plug your appliance into and then plug into the wall. It separates the wires so you can measure your amps. It's square in form. BTW, the start-up amperage of motors can be 3 times the working amperage. This meter will grab the highest current draw for you if you just push the "Max" button before you turn on the appliance. It will turn the LED display red to alert you that it's done that. Great meter.

Product features

Continuity Test

If the resistance is <30 Ω, an acoustic signal sounds continuously and the LED lights up.

AC/DC Voltage Test

Use the test leads to get the reading quickly and accurately. (Max 600V)

Resistance Test

Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ

Accuracy: ±(1.0%+5).

Two-color backlit

When the voltage > 80V, the current > 3A, the LCD backlit screen turns orange.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without the further operation, it beeps again and switches off automatically.

Product description

Specifications:

Color: Black

Range         Accuracy(After zero,     Refresh Time(Manual Mode) 

            tested with 1,10,100R    Auto mode take 0 to 2s, more time 

            resistor)            depends on capacitance value.

0.000 to 1.000R  1%+2Digit             ～0.4s

1.000 to 10.00R  1%+1Digit             ～0.4s

10.00 to 100.0R  2%+1Digit             ～0.4s

Accuracy: Up to 1% (detail on above table) 

Wide Measurement Range: >1uF

High Resolution: 4 digit, or 0.001Ohm @ 1 Ω range

Measuring voltage: <～40mV RMS (TESTING VOLTAGE)

External Power: 5V micro USB

Operating Current: 0.02A

Battery: 2 * AA 1.5V Battery (not included)

Battery Life time: >80 Hours

Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in

Item Weight: Approx 139.6g / 4.9oz

Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in

Package Weight: Approx 218g / 7.7oz



Package List:

1 * Capacitance Meter

2 * Test Clips

1 * SMD Clip

1 * User Manual

• -- This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
• -- This ESR capacitance tester is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C). The impedance become small, and we can then measure the true series resistor value.Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
• -- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
• -- This ESR meter is equipped with a SMD alligator clip for more accurately testing. Copper plating on the surface, which is anti-corrosion and oxidation resistance.
• -- Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.

Product description

The ANNMETER AN-990C SMD Meter featured the protable size and multifunctional deisgn. Auto Ranging, Auto Power Off, Diode Test and Relative Value indication support make it a practical measuring instrument for SMD, ESR and LCR detection.

Funciton Overview:

• Diode Test: √
• Auto Range: √
• Battery Test: √
• Continuity Buzzer √
• Scan Mode Function:     √
• Relative Value: style="color: rgb(51, 51, 51); font-size: 16px;">√    

    

Product Parameter:

• Digit LCD Display: 6000 Counts 
• Diode Test: Open Voltage:3.0V Testing Current:1.5mA
• Resistance Range:0.1Ω~60MΩ (Resolution: Min 0.1Ω)
• Capacitance Range:1pF~99.99mF (Resolution:Min 1pF)
• Zener/LED: Open Voltage: Min 20V  Testing Current: Approx 1mA
• Battery Power: Loading Current: Approx 10mA  Accuracy:±(1.5rd%+5dgt)
• Resistance Accuracy: 600kΩ/6MΩ/60MΩ:+/-(1.5%rdg+10dgts) at average
• Capacitance Accuracy: 9.999nF/99.99μF/~99.99mF: +/-(2.5% of rdg + 10 digits) at average

What’s in the box？

• 1* Test Lead
• 2* 1.5V(AAA)Battery
• 1* ANNMETER AN-990C SMD Meter

• ✅[High Accurate LED Tester] Using 6000 count LCD display, this ohm meter can be used to measure resistance 0~60mΩ 0.1Ωresolution,capacitance 0~99.99nF, suitable for various applications, such as electronic repair and maintenance,production lines and laboratory.
• ✅[Multifunctional Ohm Indicator] comes with high Diode Test, Continuity Buzzer, Zener/ LED, Relative Value indication, Scan Model Function, Battery test, It is the comprehensive functions that make it a must-have for SMD detection.
• ✅[Auto Power Off] This Mini Handheld Sound Level Meter features Auto Power Off design, automatically shut down after 15 minutes of inactivity, prolong the service life of battery.
• ✅[Lightweight and Compact Design] AN-990C Handheld RCD Meter is easy to carry because of the portable size and lightweight.
• ✅[After-sale Service] Rapid response within 12 hours, 12 months quality warranty and lifetime technical support,100% customer satisfaction service, any defect product problem happens please feel free to contact us. buy with confidence!

• 【Digital multimeter 6000 true rms】auto/manual range, large backlit lcd with ncv ac/dc voltage current resistance capacitance frequency temperature duty ratio diode transistor continuity on-off measurement.
• 【Ce rated safety lcd mulimeter】low battery voltage indication, 600V cat iv, 1000V cat iii, double fuse. Data hold, overload protection on all ranges, safely accurately troubleshoot a variety of automotive and household electrical.
• 【Protective case & stand & slot】soft non-slip orange rubber sleeve protection against knocks/bumps; built-in stand for hand free check screen when meter placed at 45°; test probes slot to place your probes.
• 【User friendly details】automatic polarity display, unit symbol display; screw-on back cover for easy removal; protective cover on probe for multi-use; flashlight, automatic turn off; hanging holes to hang meter in a right place.
• 【Multimeter set】test leads (1 pair) & 10A small banana plug to alligator clip & 1 k-type temperature probe & 2 1.5V aaa battery, widely served in home school lab factory for professional electricians technicians home users.

User questions & answers

Question:	The description says it measures dc current. however the product pic only shows measurements for ac current
Answer:	Yes, but you probably don't want to sand them at all! Diecast aluminum will show ALL of your sanding marks, even after paint. Just clean them very well, thin layer of primer, then spray over the original paint.
Question:	Is this meter ul listed? if someone could please look on the back of their tester and tell me if you see a "ul" mark stamped on it. thanks
Answer:	Yes, in the description. Usually Shimano includes standard cleats.
Question:	How do you get the inside battery compartment open
Answer:	yes, one pair.
Question:	Does this multimeter read MFD
Answer:	yes, shimano SH-51 includes

• 3 3/4 digits auto range pocket size digital multimeter
• Designed to measure DC and AC voltage, DC and AC current, resistance, continuity, diode, capacitance, and frequency.
• Features non-contact AC voltage detection, data hold, and automatic power-off.
• Easy-carry box-type design; Power supplied by 1 pieces easy-buy 1.5V AAA battery.(NOT Included)
• Safety Assurance: Built-in 500mA/250V Fuse. Designed according to IEC 61010 concerning electronic measuring instruments with a measurement category ( CAT II 600V ) and pollution degree 2.

User questions & answers

Question:	Dose this comes with batteries and what type batteries dose it use
Answer:	They are chrome moly shafts and i have been riding them for awhile now no problems no loosening up. as far as strikes are concerned i haven't hit them hard on any thing. At the price you can buy two sets for less than the cost of one pair of Specialized pedals and keep them on hand.
Question:	Why it takes such a marvelous shipping time? ? need i pay extra shipping fee to ship it as fulfilled by amazon
Answer:	Yes. This listing is for 2 pedals.
Question:	is this unit have auto power off
Answer:	Seems like a cheap paint a lot of mine flaked off pretty easily
Question:	Can anyone tell me the functions the does differently to a multimeter
Answer:	Yes they are.

Product features

General Specification

• Display: 3 3/4 digits LCD with a max. Reading of 3999
• Overrange Indication: OL shown on the LCD.
• Negative Polarity Indication: Negative sign - displayed automatically
• Sampling Rate: About 3 times/ sec
• Low Battery Indication: -+ shown on the LCD
• Battery: 1.5V battery, AAA or equivalent, 1 piece (BATTERY NOT INCLUDED! !!Open the battery cover and install the battery before using )

Small size,lightness,and uses box- type design. Easy to carry ideal tool

The size of the mini delicate multimeter EM3085A is similar to your phone, which can be carried everywhere in your pocket.

Its unique box-type design put the test leads hidden inside the lid,in case of missing or the probe needle hurts you.It is small but functions are powerful. Using automatic chip processing technology.

Product Parameters of ALLOSUN Pocket Size Digital Multimeter EM3081& EM3082 & EM3085A

Q&A

WHY the item didn't turn on when I received it?

This device was dead on arrival, would not even turn on?

• Please Note: For international transport safety, the battery is NOT shipped. Please kindly open the back cover and install the battery before using.

• External Power: 5V micro USB
• ❤❤❤[ESR of Capacitor] It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C). The impedance become small, and we can then measure the true series resistor value. .Using this theory, we can measure the capacitor is bad/ damaged or good in condition.Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.
• ❤❤❤【High Performance】Dual terminal， MESR-100 V2 automatic range capacitance ESR and low ohmmeter for quick and easy inspection of general purpose capacitors or resistors. Suitable for TV, LCD, audio board repair and capacitor testing.Dual terminal for your convenience a printed ESR table for fast check.
• ❤❤❤【Backlight Design & Auto Sleep】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas.support automatic sleep, no test for about 10 hours, it will automatically turn off to save power.
• ❤❤❤【Powerful test function】 Measurement range from 0.001 to 100.0R, support IN CIRCUIT test, can apply DC or peak-to-peak value of less than 15mV on a good capacitor, and measure ESR value with true 100 KHz sine wave.Auto Range or Manual Range, You can Easily Select the Mode by Pressing Measuring Button; You can Easily Select the Mode by Pressing SELECT Button until the Continuity Symbol Appears on the Screen.
• ❤❤❤【Nice Protective Shell】 - The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45° Angle and Makes the Screen Easy to See Hands Free.

Product features

KKmoon MESR-100 capacitor tester

This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.

ESR LCR Capacitance Ohm Meter Professional Measuring Capacitance Resistance Capacitor Circuit Tester

ESR of Capacitor：It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C). The impedance become small, and we can then measure the true series resistor value. .Using this theory, we can measure the capacitor is bad/ damaged or good in condition.Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.

High Performance：Dual terminal， MESR-100 V2 automatic range capacitance ESR and low ohmmeter for quick and easy inspection of general purpose capacitors or resistors. Suitable for TV, LCD, audio board repair and capacitor testing.Dual terminal for your convenience a printed ESR table for fast check.

Backlight Design & Auto Sleep：Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas.support automatic sleep, no test for about 10 hours, it will automatically turn off to save power.

Powerful test function：Measurement range from 0.001 to 100.0R, support IN CIRCUIT test, can apply DC or peak-to-peak value of less than 15mV on a good capacitor, and measure ESR value with true 100 KHz sine wave.Auto Range or Manual Range, You can Easily Select the Mode by Pressing Measuring Button; You can Easily Select the Mode by Pressing SELECT Button until the Continuity Symbol Appears on the Screen.

Nice Protective Shell：The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45° Angle and Makes the Screen Easy to See Hands Free.

MESR-100 circuit tester

Precision range :

• 0.000 to 1.000R 1% + 2Digit ~ 0.4s
• 1,000 to 10.00R 1% + 1Digit ~ 0.4s
• 10.00 to 100.0R 2% + 1Digit ~ 0.4s

Test the capacitor :

• Tested with 1,10, 100R Auto mode take 0 to 2s.
• During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.

Package List :

• 1 * Capacitance Meter
• 2 * Test Clips
• 1 * User Manual

Size :

• Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in
• Item Weight: Approx 139.6g / 4.9oz
• Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in
• Package Weight: Approx 218g / 7.7oz

• TRMS 6000 COUNTS DIGITAL MULTIMETER: Accurately measures AC / DC current, voltage, capacitance, resistance, temperature, frequency, diode, transistors and more, maximum reading over time, manual ranging and continuity buzzer.
• TROUBLESHOOTS & SAFETY PROTECTION: Meet the requirements of 600V CAT IV 1000V CAT III, built-in explosion-proof ceramic fuse tubes, reverse Polarity protection, low battery indication, and overload protection for all ranges. Automotive and household electrical problems safely and accurately.
• LARGE BACKLIT LCD DISPLAY: Data hold and 3.0-inch large digital display with backlit LCD for visibility in dimly light areas.
• EASE OF USE: Built-in kickstand for hand-free use. Protective rubber corner guards for drop protection. Auto Shut-off and Hanging Magnet. Sampling Speed: 2-3 times per second.
• WHAT YOU GET: LOMVUM digital multimeter, test leads with alligator clip, K-type thermocouple, 2*ceramic fuse tubes, 4*1.5V AAA batteries, user manual and 2 year warranty. Our after-sales customer service is available any time. Please feel free to contact us for help.

User questions & answers

Question:	Can I download a pdf version of the manual
Answer:	The NGK website shows this part number spark plug has a tapered seat. https://partcat.com/ngk The spark plug will be correct for the intended application, so just make sure you’ve selected the correct spark plug for your specific vehicle
Question:	I recently ordered this and the temperature probe is only for ambient air temperature. do you sell upgraded probes
Answer:	It fit my 2008 honda odyssey ex-l
Question:	How can you measure Hfe with only two leads
Answer:	I recommend that you go to the Amazon page and go to the garage, enter the information that the system asks you for and there is the search you will automatically receive the information of the products that are for your audi.
Question:	Where is it made
Answer:	Yes, the catalog shows Shows the Bosch 9603 to be the correct spark plug fr your Vibe. You can purchase them here: https://amzn.to/343kuAz Don't forget to use anti-seize compound on the threads of the new plugs.

Product features

LOMVUM 's T28C Digital Multimeter features ranging true root mean square technology for an even better measurement accuracy

Technical Specifications

DC Voltage: 600mV/ 6V/ 60V/ 600V/ 1000V ±(0.5%+5)

AC Voltage: 600mV/ 6V/ 60V/ 600V/ 750V ±(1%+4)

DC Current: 60uA/ 6mA/ 60mA/ 600mA ±(1.2%+5); 20A ±(2.0%+5)

AC Current: 60mA/ 600mA ±(1.5%+5); 10A ±(2.0%+5)

Resistance: 600Ω/ 6KΩ/ 60KΩ/ 600KΩ/ 6MΩ/ 60MΩ ±(0.8%+5)

Capacitance: 6nF/ 60nF/ 600nF/ 6μF/ 60μF/ 600μF/ 6mF/ 100mF ±(4.0%+5)

Frequency: 9.999MHz ±(1.5%+5)

Temperature: -20 °C~1000 °C/ -4 °F~1832 °F

Safety Class: IEC-61010, 600V CAT IV, 1000V CAT

Multifunctional Multimeter

Accurately measures AC / DC voltage, current, capacitance, resistance, temperature, frequency, diode, transistors and more.

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Intelligent Anti-burn and Double Protection

2 built-in ceramic fuse tubes make the multimeter secure and reliable. Overload protection is active on all ranges.

Hanging Magnet & Data Hold

Hanging magnet and data hold make taking and recording measurements easier than ever before.

LCD Backlight Design

Show the reading clearly in dark areas and at night. The backlight and flashlight work together to save battery power to make the multimeter last longer.

Protective Sleeve

A removable rubber jacket around the multimeter keeps it durable and safe, and also offers minor drop protection.