10 best meter with capacitances

Product description

Specification:

Material: Plastic + electronic components

Color: Red + Black

Range Choice: Manual Range

Measuring range: 0.1pF-20,000uF, divided into 9 files.

The maximum display: "1999" that is 3 1/2.

Sampling rate: 2-3 times per second

Zero adjustment: Manual

Power supply: 6F22 9V laminated battery (Not included)

Maintain accurate operating temperature: 23 ± 5 ℃

Working environment: 0-40 ℃ Relative humidity: ≤85 ℃

Storage environment: temperature -10-50 ℃, relative humidity: ≤ 85%

Size: (L) x (W) x (H)142 x 74 x 35mm / 5.59" x 2.91" x1.38"(appr.)



Package included:

1 x Capacitor Meter Tester(Not include the battery)

2 x Line

1 x Manual



Notice:

Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.

Please understand that colors may exist chromatic aberration as the different placement of pictures.

• ★ Capacitor Tester: CE certified professional capacitance meter. Powered by a 9V battery (not included), low power consumption. Large digits LCD display, max 1999.
• ★ Easy to Use: The instrument structure is compact, with a safety jacket, easy to operate and carry, is the ideal electrical measurement props. Data hold function. Manual adjustment knob for zeroing.
• ★ Test Range& Accuracy: 200pF, 2000pF, 20nF, 200nF, 2uF, 20uF, 200uF (+/-0.5%+/-20 digits), 2000uF (+/-2.0%+/-20 digits), 2mF (+/-4.0%+/-20 digits).
• ★ Application: It is a novel handheld LCD display capacitive table which can also be used for digital analysis, selection of capacitors, measurement of unknown capacitors, matching capacitors, measuring cable capacitance and etc.
• ★ Quality Assurance: All of the product are strictly inspected before shipment, so please purchase with confidence. Please contact us if there is a defective product due to manufacturing reasons.

User questions & answers

Question:	why does mine look different and say "multimeter
Answer:	im running about the same system 4 l7 15 but 2 2500.1 and I put in 2 optima yellow tops, I would.. Really recommend the yellow tops
Question:	meters spec claim to measure down to .1 pf, but the image of the meter shows 200pf is as low as it can go. why the discrepency
Answer:	I WOULD
Question:	Can this be used with out removing capacitor from circuit
Answer:	The farad's are calculated off the amps rms wattage not the speakers. You could always have more but this will do plenty. General rule of thumb is 1000 watts rms per farad
Question:	Can this check capactors in circut
Answer:	No it doesn't come with a charger. it simple to charge it comes with a resister the manual has a picture how to charge it n to discharge it simple.

Product description

Specifications： Display Count: 2000 Auto Range: Yes Jaw Capacity: 17mm True RMS: Yes Diode: Around 3.0V V.F.C.: Yes NCV: Yes Data Hold: Yes Zero Mode: Yes LCD Backlight: Yes Auto Power Of: Around 15 Minutes Continuity Buzzer: Yes Low Battery Indication: 2.5V Input Protection: Yes Input Impedance for DCV: 10M AC Current (A) 2A/20A/100A (±2.5%+5) DC Current (A) 2A/20A/100A (±2%+3) AC Voltage (V) 2V/20V200V/600V (1.0%+3) DC Voltage (V) 200mV/2V/20V200V/600V (±0.7%+3) Resistance (Ω) 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ (±1.0%+2) Capacitance (F) 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF(±4%+5) General Characteristic Product Net Weight: 170g Product Size: 175mm * 60mm * 33.5mm Power: AAA 1.5V x 2 (Included) LCD Size: 39.3mm * 21.5 mm Package Size: 18.6 * 7.2 * 5.9cm / 7.3 * 2.8 * 2.3in Package Weight: 311g / 11oz Package List: 1 * UNI-T UT210E Mini Clamp Meters (Batteries not Included) 1 * Test Lead 1 * English Manual

User questions & answers

Question:	is it auto ranging for measuring amp
Answer:	No, you cant. With this or o other clamp. The clamps detect the electromagnetic waves that only AC current can do. DC CANT.
Question:	Description says: "batteries included: no. batteries required: no." is this a misprint? or is there an ac adapter option
Answer:	Thanks for your asking. For our Proster Auto-Ranging Digital Multimeter, LCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	can someone please let me know if there is a user manual for this unit, or a link? mine arrived with a manual, but in chinese. thank you
Answer:	Thanks for your asking. For our Proster Auto-Ranging Digital Multimeter, LCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	Can I measure DC current with the clamp
Answer:	Thanks for your asking. For our Proster Auto-Ranging Digital Multimeter, LCD Display with 5999 and 2000uF, relative value measuring, maximal/minimal value measuring, auto/manual range. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]

• Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.
• High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V
• Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.
• Multi-function: Auto power off; Data Hold function; Low Power Indication; ZERO ADJ for Capacitance.
• New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip; The black pen is connected to the negative pole and the red test lead is connected to the positive pole

User questions & answers

Question:	Seller,what are minimum measured values of capacitance-10pf?,inductance-100uh?,resistance-100ohm? put your answer here and in description near price
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. The minimum values for your measurement: the capacitance, 1.0pf; inductance, 1.0uh; resistance, 1.0ohm. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	Can you check the inductance/capacitance of a component using test leads, not using the "flat" slots on the front of the meter, designated "LCR
Answer:	Thanks for your asking. For Our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]
Question:	I need to measure down to 2uh, will this meter do that
Answer:	Lowest range on the BM4070 is 200 microhenries, with a resolution of 0.1 uH. However, accuracy degrades substantially at small inductance values. For example, my instrument reads 0.9 uH with zero test inductance (test lead length is 2 x 8 inches). With a 26 inch pair of test leads, this error increases to 2.3 uH. Thus, it's important to determine and subtract out the stray inductance of your test setup before trying to measure anything as small as 2 uH. Also, I have no precisely known inductances at values this small, so cannot say what the instrument calibration accuracy is in this range. If accuracy/precision are important, I'm afraid you're going to have to obtain a (much more expensive) lab-grade instrument, such as an inductance bridge, capable of measuring down to this level.
Question:	For l/c measurement, what frequency do this use? 100hz? 1khz? 10khz? or
Answer:	Thanks for your asking. For our Proster LCR Meter,it is a inductance, capacitance and resistance measuring meter, and a special digital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2. All our products have full 18 months warranty, if there is any problem,we will try our best to help, please rest assured. Belle Proster Customer Service Team [email protected]

Product features

Tips for not accurate measurement:

To measure small capacitance, different measurement principles and different measurement frequencies will lead to different measurement results.

The resistance component affects the accuracy, and the measurement results need to be subtracted from the data displayed before the measurement.

When measuring small inductors and capacitors, if the component feet are suitable, it is recommended not to use the test leads. Please just insert component feet directly into two rectangular jacks of LCR Meter to measure.

1 LCR meter, 1 pair of Crocodile Clip, 1 pair of Alligator, 1 pair of Test Probe, 1 Screwdriver, 1 9V Battery, 1 User Manual,1 Portable Bag

Inductance (L): 200uH-20H, up to accuracy: ± 2.5% (μH=10-6H; mH=10-3H);

Resistance (R): 200Ω-20MΩ, accuracy up to: ±0.8%;

Capacitance (C): 200pF-2000uF, accuracy up to: ± 2.5% (PF=10-12F;nF=10-9F;μF=10-6F;mF=10-3F);

Note: If you are measuring a patch component (SMD), the shorter the measurement line, the more accurate the measurement.

Inductance (L): 200uH - 20H

Range:200uH;Accuracy±(3%+5);Resolution:0.1uH

Range:2mH;Accuracy±(2%+5);Resolution:1uH

Range:20mH;Accuracy±(2%+5);Resolution:10uH

Range:200mH;Accuracy±(2%+5);Resolution:100uH

Range:2H;Accuracy:±(2%+5);Resolution:1mH

Range:20H;Accuracy±(5%+5);Resolution:10mH

Resistance (R): 200Ω - 200MΩ

Range:200Ω;Accuracy±(0.8%+2);Resolution:0.1Ω

Range:2KΩ;Accuracy±(0.8%+2);Resolution:1Ω

Range:20KΩ;Accuracy±(0.8%+2);Resolution:10Ω

Range:200KΩ;Accuracy±(0.8%+2);Resolution:100Ω

Range:200MΩ;Accuracy±(1.5%+5);Resolution:10KΩ

Capacitance (C): 200pF - 2uF

Range:200pF;Accuracy±(2.5%+5);Resolution:0.1pF

Range:2nF;Accuracy±(2.5%+5);Resolution:1pF

Range:20nF;Accuracy±(2.5%+5);Resolution:10pF

Range:200nF;Accuracy±(2.5%+5);Resolution:100pF

Range:2uF;Accuracy±(2.5%+5);Resolution:1nF

Range:20uF:Accuracy±(2.5%+5);Resolution:10nF

Range:200uF;Accuracy±(2.5%+5);Resolution:100nF

Range:2000uF;Accuracy±(5%+5);Resolution;1uF

Product description

1This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing. Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.

Features:

It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).

Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.

Specifications:

Color: Black

Range         Accuracy(After zero,     Refresh Time(Manual Mode)

            tested with 1,10,100R    Auto mode take 0 to 2s, more time

            resistor)            depends on capacitance value.

0.000 to 1.000R  1%+2Digit             ～0.4s

1.000 to 10.00R  1%+1Digit             ～0.4s

10.00 to 100.0R  2%+1Digit             ～0.4s

Accuracy: Up to 1% (detail on above table)

Wide Measurement Range: >1uF

High Resolution: 4 digit, or 0.001Ohm @ 1 Ω range

Measuring voltage: <～40mV RMS (TESTING VOLTAGE)

External Power: 5V micro USB

Operating Current: 0.02A

Battery: 2 * AA 1.5V Battery (not included)

Battery Life time: >80 Hours

Item Size: Approx 14.5 * 8 * 3cm / 5.7 * 3.1 * 1.2in

Item Weight: Approx 139.6g / 4.9oz

Package Size: Approx 17 * 9 * 5cm / 6.7 * 3.5 * 2.0in

Package Weight: Approx 218g / 7.7oz



Package List:

1 * Capacitance Meter

2 * Test Clips

1 * User Manual

 

• It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).
• The impedance become small, and we can then measure the true series resistor value.
• Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
• Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test.
• During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.

• 9 measuring ranges from 200pF to 20mF
• Features Data Hold and a Backlit LCD with large digits for visibility in dimly lit areas
• Protective rubber sleeve for drop protection; Built-in support stand for hand free use
• ZERO Adjustment for compensation of measuring
• Meets IEC safety standard 61010;Decent choice to troubleshoot household electrical problems

User questions & answers

Question:	Anybody checked (ceramic, mylar, electrolytic, tantalum) accuracy on a Fluke meter or better? If so, is this meter reasonably accurate - % variation
Answer:	I haven't try it. But I think it is washable. Leave the insulation inside while washing to prevent the washing rotor damaging the insulation.
Question:	how do you use the zero adjust
Answer:	The measurements are pretty accurate. It can hold a lot of items. I am extremely satisfied with the size and product.
Question:	Where can i get the owners manual
Answer:	I also live in FL., what I do is have some blue ice packs, put them in the bag in the morning they’ll stay cool 6 hours or more. I use three.
Question:	Can I test the caps on the board
Answer:	No the bag is flexible but well made and insulated.

Product features

Professional Capacitance Test Meter

The ELIKE 6013 capacitor tester combines ease of use with innovation, making it the perfect tool for any electrical project.

It can test spare capacitors before using them as replacements and it is good to diagnose a faulty circuit board if the fault was due to a faulty capacitor.

The meter is of compact structure and pocket size with rubber protection holster in case of dropping. Large integration provides high reliability and durability.

The hold function keeps the reading on the display.

A low-battery indicator signals when the meter's batteries need to be replaced.

The ‘1’ signals to remind to switch to a higher range.

Click the Button & Order the clamp meter today!

Product description

Features:

Measure AC/DC current (minimum 1mA by jaws)

Measure microamps μA (minumum 0.1μA by terminals)

Measure AC/DC voltage

V-alert measurement, live-wire check

Measure frequency, temperature, resistance, continuity and capacitance

Low impedance voltage measurement

Clamp on frequency function

Auto range, Auto power off, data hold, low battery indication with backlight

Conform to the IEC-61010-1, IEC-61010-2-030, IEC-61010-2-032, IEC-61010-2-033 standards

Over-voltage protection class CAT III 300V, CAT II 600V, pollution degree II



Specifications:

Display: 6000 counts

DC current: 6A/60A/100A 0.001A/0.01A/0.1A ±(3.0%+5counts)

DC current(μA): 0-200μA 0.1μA ±(0.8%+5counts)

AC current: 6A/60A/100A 0.001A/0.01A/0.1A ±(2.5%+5counts)

DC voltage: 6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3counts)

AC voltage: 6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3counts)

Low impedance LOZ: Max 600V Resolution 0.1V

Resistance:

600Ω/6kΩ/60kΩ/600kΩ/6MΩ 0.1Ω/0.001KΩ/0.01KΩ/0.1KΩ/0.001MΩ ±(1.0%+3counts)

60MΩ 0.01MΩ ±(1.2%+20counts)

Capacitance: 600µF/6000µF 0.1µF/1µF ±(4.0%+3counts)

Frequency: 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5counts)

Frequency(by jaws): 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5counts)

Buzzer: If the resistance is less than 30Ω, the continuity beeper sounds

Temperature: -20℃~500℃ 1℃/2℉ ±(2.0%+2counts)

Jaw Capacity: 20mm

Power: 1.5V (AAA) x 2 (not included)

Size: 179 x 67 x 36 mm

Weight: 137g



Package Includes:

1 x Digital Clamp Meter

1 x Probes

1 x Thermocouple

1 x Carrying Case

1 x Screwdriver

1 x User Manual



Note:

The batteries are not included in the package due to Aviation Security Check

• [1mA Sensitivity]: 1mA sensitivity when measures AC/DC current by clamp.
• [Dual Line Display]: Dual line display can show both AC voltage/current and frequency or Celsius and Fahrenheit on the screen.
• [Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
• [Activate V-Alert at Any Function]: Activate V-Alert (non-contact voltage detection) function under any function design makes non-contact voltage testing more convenient.
• [Back Clip Design]: Back clip design make it more portable, hang on your belt or pocket.

User questions & answers

Question:	Is this basically the same unit as the Uni-T 210D
Answer:	Yes, they have the functional fly.
Question:	with the clamp can you measure amps in DC ?. Up to how many amps maximum
Answer:	They don’t have a pouch but I have plenty to room in the front.
Question:	Is it true rms with the amps
Answer:	I'm 6'3" and I didn't need to go up a size. The legs have more than enough room.
Question:	what is the minimum dc amperage it will measure? 1ma
Answer:	I ordered a set of rechargeable batteries on Amazon. They work perfectly.

Product description

Features:

LCR-T7 tester is latest version, high test speed.

Automatic detection of zener diode 0.01-30V, self test with automatic calibration.

Support IR coding, IR waveform display, and infrared receiving instruction.

Measurement results using TFT graphic display.

One key operation.

Built-in high capacity rechargeable Li-ion Battery.

Li-ion Battery voltage detection.

Micro USB charging interface.

Specifications:

Material: plastic.

Color: blue & white.

Size: 90x70x27mm.

Display Type: Digital Display.

Package included:

1 * Transistor Tester.

1 * USB cable.



Package Including



.

• Micro USB charging interface, diode triode capacitance inductor, one key operation
• IR multifunction tester, built-in high capacity rechargeable Li-ion battery
• Diode triode capacitance inductor, measurement results using TFT graphic display
• Support IR coding, IR waveform display, and infrared receiving instruction
• Automatic detection of zener diode 0.01-30V, self test with automatic calibration

Product description

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The Fluke 323 323-AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

• Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

User questions & answers

Question:	On my 325 I'm not impressed with the backlight which is more of a sidelight with a couple of white LED's on just one side. Is your 325 the same
Answer:	No, It only installs one way and as long as you orientate it correctly and install it with the wires in the same position as they were in previously you should have no issues.
Question:	The Fluke 325 spec sheet shows current range as 40A - 400A for both AC and DC. How do you switch the meter from 40A range to 400A range
Answer:	I believe its brass. I don’t remember seeing any aluminum.
Question:	Is there a peak hold feature for inrush
Answer:	Yes this will fit your Tahoe
Question:	What is the smallest ac and dc current you can measure? Is the dc measurement small enough to hunt down parasitic battery drains in a 12v car
Answer:	Is not designed for physical contact. 25,000 volts is plenty enough to jump the small gap in distributer plus the spark plug gap.

Product features

Fluke 325 True RMS Clamp Meter

The Fluke 325 True-rms Clamp Meter is a reliable, versatile troubleshooting tool for commercial and residential electricians. Featuring a slim design for easy transport and use, and a large display for efficient troubleshooting. In addition to true-rms AC current and voltage on non-linear loads, the 325 measures:

• DC current
• DC voltage
• Temperature
• Frequency

You’ll carry fewer tools in your bag and get more work done.

Product description

Product Features:

It can measure capacitance(1pF-100mF) and inductance(1uH-100H).

It has four measuring range position:

1.C range........Capacitance(0.01pF-10uF)

2.L range........Inductance(0.001uH-100mH)

3.Hi.L range......Big inductance(0.001mH-100H)

4.Hi.C range......Big capacitance range(1uF-100mF)



Product Parameters:

Measurement accuracy: 1%

Capacitance measuring range: 0.01pF-10uF

Minimum resolution: 0.01pF

Inductance Range: 0.001uH-100mH

Minimum resolution: 0.001uH

Large inductance measurement range: 0.001mH-100H

Minimum resolution: 0.001mH

Large capacitance measuring range: 1uF-100mF

Minimum resolution: 0.01uF

Test frequency: capacitors, inductors file about 500kHz, large inductance of about 500Hz

Effective display digits: 4

Display: 1602 LCD

Power supply: miniUSB interface to take power or 5V power supply

SMD soldering components, stable and reliable



Notes:

1. When measuring electrolytic capacitors in HC mode, please note that the polarity is negative.

2. If a measurement of 0 is displayed, zero adjustment is sometimes necessary, which may be a negative deviation.

3. It is strictly forbidden to press the reset button when testing the end element, this operation will lead to wrong results.

4. It is strictly forbidden to discharge untested capacitors, otherwise it may cause damage to the meter.

5. Use the 5V adapter module power supply and ensure that the polarity is negative, otherwise the module will be damaged.



Package Includes:

1 x Inductance Capacitance Meter

1 x Mini USB Cable

• This capacitance meter is based on the LC resonance principle and adds the precision measurement calculation of a high-speed microcontroller, which can measure small inductances below 1uH and small capacitances below 1pF.
• This inductance tester does not use any potentiometer adjustment, calibration parameters are completely stored in the microcontroller FLASH internal power-down is not lost, than the potentiometer calibration methods to accurately.
• This capacitance tester is flexibly calibrated online and can always maintain measurement accuracy.
• This inductance meter has four gears, all gears are automatic range, easy to use.
• The L/C meter especially suitable for microwave manufacture and measuring switching power supply transformer, filter inductance and soon.

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.