10 best paint remover for metal gallon
A paint remover for metal in a gallon-sized container is a chemical product used to strip paint, varnish, or other coatings from metal surfaces. It falls under the category of paint strippers/removers and is a common tool in painting, refinishing, and restoration projects. Here are some key points about paint removers for metal in gallon-sized containers:
Chemical Composition: Paint removers for metal typically contain strong chemicals, such as methylene chloride, NMP (N-Methyl-2-pyrrolidone), or caustic soda (sodium hydroxide). These chemicals work to soften and dissolve paint, making it easier to remove.
Gallon Size: Gallon-sized containers are ideal for larger projects or when you need a significant amount of paint remover. This size is commonly used by professionals and for extensive paint removal tasks.
Application: Paint remover for metal is applied directly to the painted surface using a brush, roller, or sprayer. It is important to follow the manufacturer's instructions for application, as the specific method may vary depending on the product.
Dwell Time: The paint remover is typically left on the surface for a specified period, allowing it to penetrate and loosen the paint. The dwell time can vary depending on the product and the thickness of the paint.
Scraping: After the dwell time has passed, the softened paint can be scraped off using a putty knife, paint scraper, or other suitable tools. Multiple applications may be necessary for thick or multiple layers of paint.
Safety Precautions: Paint removers for metal can be hazardous due to their chemical content.It is essential to use them in a well-ventilated area, wear protective gear such as gloves and goggles, and follow safety guidelines provided by the product manufacturer.
Cleanup: Once the paint has been removed, the treated surface should be thoroughly cleaned and neutralized according to the product instructions. This ensures that no residue or chemical traces are left behind.
Disposal: Properly dispose of used paint remover and any paint waste according to local environmental regulations. Some paint removers require special disposal procedures.
Alternative Options: There are environmentally-friendly or "green" paint removers available that use less harmful chemicals. These options are often preferred for their reduced environmental impact and reduced health risks.
Surface Compatibility: Ensure that the paint remover you choose is compatible with the specific type of metal you are working with, as some formulations may not be suitable for all metals.
In summary, paint remover for metal in a gallon-sized container is a chemical product designed to remove paint and coatings from metal surfaces. When using these products, it's crucial to follow safety precautions and manufacturer instructions for effective and safe paint removal.
Below you can find our editor's choice of the best paint remover for metal gallon on the market
Dumond Chemicals, Inc. 3301 Smart Strip Advanced Paint Remover, 1 Gallon,White
Dumond
Product description
The Smart Strip Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior/exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.
From the Manufacturer
The Smart Strip™ Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior / exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.
- This product adds a great value
- Safe for user, substrate and environment
- Removes multiple layers
- Does not contain methylene chloride, any caustics, or toxic chemicals. It is odor-free and safe for the environment
- This paint stripper is exceptional for the safe removal of lead-based paint and is excellent for intricate, carved, or molded surfaces
- It is also outstanding for removing marine paints without damaging the gel coat
- Because it is a paste, the Smart Strip Advanced Paint Remover paint stripper can easily be applied by brush, roller or conventional airless sprayer
User questions & answers
| Question: | has anyone use this in a sprayer |
| Answer: | I believe it is 90% Perchloroethylene. So, no it is not ammonia based. http://docs.crcindustries.com/msds/5090.pdf |
| Question: | how does it do on wood |
| Answer: | The red gallon is the more EPA-sensitive chlorinated version, the only size of it available in NJ. Only the green non-chlorinated formula is available here in the aerosol-spray size. |
| Question: | How many gallons would be needed for a 26 ft boat with a 10 ft beam |
| Answer: | I bought this before. It is only 1 container, which is one gallon size.If it was a case of 4 containers it would be a steal at that price |
| Question: | does it work on brick which has latex paint on it |
| Answer: | NO, this CRC 05090 product is not safe to use for cleaning before welding, heating or exposing to a flame. This product is a chlorinated solvent, Tetrachloroethylene aka Perchloroethylene and even when apparently dry rapidly decomposes into Hydrogen Chloride and/or Phosgene gas/vapor (chemical warfare weapons agents) when exposed to heat and/or flame, which are highly corrosive, toxic, damaging to human tissue, health and can be fatal. |
Evapo-Rust The Original Super Safe Rust Remover, Water-Based, Non-Toxic, Biodegradable, 1 Gallon,Gray,ER012
Evapo-Rust
Product description
Evapo-Rust Remover gives new life to all your rusty household items. It's so easy to use; anyone can restore their rusted steel tools, auto parts and household items to like-new condition. Evapo-Rust is safe enough to use on any rusty item including cast iron cookware, grill grates, knives, antiques and anything metal. It features a non-toxic, environmentally safe, water-based formula that removes rust in just minutes, no scrubbing needed. Evapo-Rust is reusable depending on the thickness of the rust. Evapo-Rust removes even heavy rust completely, is non-toxic, non-corrosive, is safe on skin and eyes. Evapo-Rust has no fumes or bad odors, is non-flammable and can be disposed of safely by simply pouring down the drain in most areas. Evapo-Rust contains no acids, bases, solvents or other toxic ingredients, it will not harm un-rusted steel, safe on other metals, plastic, PVC, Viton and most paints. Some uses include; cast iron cookware, grill grates, antiques, tools, auto parts, clocks, sewing machines, toys and more.
- One Gallon Rust Remover is environmentally-safe water-based product that removes rust in minutes, without scrubbing or sanding
- Non-toxic, Biodegradable, Non-corrosive, Safe on skin and eyes, No fumes or bad odors, Contains no acids, bases, solvents, or VOCs
- Requires no special equipment (gloves, protective eyewear, masks) and will not harm unrusted steel or affect plastic, PVC, Viton and most paints
- Safe for use on; cast iron cookware, grill grates, antiques, tools, auto parts, clocks, sewing machines, toys and more
- Since Evapo-Rust Super Safe Rust Remover is reusable, one gallon de-rusts up to 300 lbs. of steel
User questions & answers
| Question: | I have some metal that turned rusty because it is used in humid enironment. Will this make the metal more prone to rust after rust is removed |
| Answer: | Not sure |
| Question: | My metal is covered with sticky goo after I left evapo-rust on it. I want to avoid water rinse due to flash rust. how do you rinse this off |
| Answer: | I didn’t try it on my oven. Sorry. I tried it on my cabinets and it was worthless |
| Question: | It seems that almost every review involves "soaking" items. How does this work on surface rust that cannot be soaked |
| Answer: | No |
| Question: | Will this be safe to clean steal scuba tank in side and help prevent rust |
| Answer: | yes |
Product features
Super Safe Rust Remover
Easy To Use
Reusable
Before and After
A product of extensive research, EVAPO-RUST rust remover is an water-based product that removes rust in minutes, without scrubbing. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. One gallon will remove up to 268 gr of dry rust, that's almost 1/2 a pound.
Before and After
A product of extensive research, EVAPO-RUST rust remover is an environmentally-safe water-based product that removes rust in minutes, without scrubbing. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. One gallon will remove up to 268 gr of dry rust, that's almost 1/2 a pound.
Before and After
A product of extensive research, EVAPO-RUST rust remover is an environmentally-safe water-based product that removes rust in minutes, without scrubbing. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. One gallon will remove up to 268 gr of dry rust, that's almost 1/2 a pound.
Before and After
A product of extensive research, EVAPO-RUST rust remover is an environmentally-safe water-based product that removes rust in minutes, without scrubbing. It's so easy to use, anyone can restore their rusted tools, auto parts, even firearms to like-new condition. One gallon will remove up to 268 gr of dry rust, that's almost 1/2 a pound.
Automotive Stripper (Gallon - 128oz) Super Remover - Removes Paint from Metal - Clings to Vertical Surfaces
- STRONG: The strongest automotive paint stripper available without methylene chloride, NMP, or any other highly toxic chemicals.
- SAFER: This revolutionary, patent pending, new automotive stripper works similar to products containing methylene chloride, but uses only safer ingredients. Water cleanable.
- FAST: Ultra fast action. Works in 15 minutes for most automotive paint stripping projects. Removes multiple layers in one application (up to 5 layers).
- GEL: The gel formula easily clings to vertical surfaces. Can be covered with a plastic film for extra effectiveness
- EXPERTISE: Super Remover has been manufacturing high quality stripping products for over 40 years.
User questions & answers
| Question: | Can it be used on metal model cars |
| Answer: | It's not safe on rubber. Do not use also on linoleum, plastic, asphalt tiles, fiberglass and other synthetics. |
| Question: | Will this remove chrome under paint or just the paint |
| Answer: | It’s strong |
| Question: | Can this be used on a motor |
| Answer: | U wouldn’t believe what I went through removing powder coat from valve covers. I tried glass bead and acetone, not good enough. This stripper works well I recomend......wear protection eyes mouth hands, make it last follow directions for best results |
| Question: | Will this remove powder coat |
| Answer: | I used this product in conjunction with citristrip to remove a layer of spray paint on top of a bad hydrographics print on a polymer ruger pistol frame. During the process, I discovered that the frame itself was unscratched/damaged and that this tool's usefulness directly corresponded to the amount of "cook time" I left the citristrip applied. Having said this - I would recommend taking both the paint and the varnish layer off - then reapplying a layer of varnish to ensure a clean, unblemished finish. This brush does the job quite well without digging into the product underneath. However if your aim is to not remove the varnish layer, and you're using a chemical stripper - your "cook time" will have to be minimal to prevent over penetration by the Chem product into the varnish layer. |
Product features
Industrial performance!
- Removes up to 5 layers
- Ultra-fast action gel
- Removes all types of paint
- Water cleanable
- Safe for all surfaces
Why use our multilayer stripper?
- Does not contain Methylene Chloride, NMP or any other highly toxic chemicals.
- The gel formula clings easily to vertical surfaces
- Can be covered with a plastic film for extra effectiveness
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
Kleanstrip
Product description
Klean-Strip GSW362 WAX & GREASE REM. NOTE: Due to regulations and restrictions, the item cannot be shipped to the state of California. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Prep-All works on metal, plastic and fiberglass
- Perfect for surface prep - use before sanding and painting
- Fast acting, works immediately
- 1 Gallon
- NOTE: This item is not for sale in the state of California
User questions & answers
| Question: | Does it remove silicone |
| Answer: | This product isn't designed for use with plastics polymer material absorbs chemicals could have undesirable affects etc discoloration they make a wax and grease remover for plastics that would be what your looking for this product is solvent based |
| Question: | Will it remove mold release agent from fiberglass to prep for bonding with epoxy |
| Answer: | Not sure if this product would scratch tile. I would use paint remover and if it dosnt come out of grout you could probably use this product. |
| Question: | does it damage original paint |
| Answer: | I would say it strips equivalent to probably 60 grit sandpaper, however it won't wear down the wood like sandpaper will. The brick will crumble apart before it will wear down the wood. |
| Question: | Will this remove residual oils from water based polishes on auto paint |
| Answer: | Who paints vinyl siding?? If you made that mistake, I'd blow off the paint with a pressure washer. This block is very abrasive and will damage your siding. |
Sunnyside Corporation 634G1 Paint & Varnish, Gallon, 2 Minute Remover Advanced Gel, 2 Pack
Sunnyside Corporation
Product description
2-Minute Remover ADVANCED stripping gel is designed to remove multiple layers of finish in one application. This Methylene Chloride Free, semi-paste formula clings to rounded and vertical surfaces to make paint removal easy. It quickly attacks the finish and lightens wood stain but will not harm wood or corrode metal. Use on wood, metal, masonry, marine and automotive finishes removing latex and oil-based paint, lacquer, shellac, varnish, epoxy and polyurethane finishes.
From the Manufacturer
Founded in 1893, Sunnyside Corporation manufactures paint solvents, safer paint removers, paint additives and cleaners for home center, hardware and paint retailers nationwide. Quality has been our hallmark for over 125 years. Under the fourth generation of family leadership, Sunnyside has provided trusted home improvement products for the professional and the do-it yourselfer. “Innovative Products for Today and Tomorrow.”
- New, safer formula is methylene chloride free
- Stripping gel removes multiple layers of paint or varnish in one application
- Safe to use on vertical and horizontal surfaces; will not damage wood, metal and masonry
- Fast-acting; will being to work in 2-10 minutes on most coatings
- Coverage is approximately 100 square feet / gallon
User questions & answers
| Question: | Does this work well to remove polyurethane |
| Answer: | Not sure if this will work for your application? I used this to clean some white vinyl before I sprayed it Black. It worked really well for what I was doing. |
| Question: | Has anyone used it on wood? Any chance you could send a video or picture? I have a lot of trim w at least 2 coats of paint on it & is taking to long |
| Answer: | To be safe I would use a chemical spray bottle. Overtime this would probably soften the bottle. I usually just pour some on a soft lint free rag to apply |
| Question: | How do I dispose product after use |
| Answer: | It removes grease and wax |
| Question: | This seems like a pretty good deal for 2 gallons at $42 ..it says usually ships in 1 to 2 months is that a joke ? Does it ship sooner |
| Answer: | It won't damage the finish. It's a large bottle. Wish you were my neighbor, I will tell you to come try what I have left. As to whether it will remove the sticker adhesive, I don't know. I have used cooking oil, patience and a lot of rubbing works well for removing adhesive. Sometimes WD 40 too. Neither will damage the finish. Good luck |
Product features
STEP 1
Pour it on. Cover the surface generously.
STEP 2
Wait 2 minutes. Some materials need up to 5 minutes. Don't wait longer or the solution may begin to dry.
STEP 3
Scrape off several layers at once to reveal bare surface. Wipe away with a cloth.
STEP 4
Finish off with a wire brush for the most stubborn areas.
KBS Strip Gallon - Paint Remover/Stripper Gel - Contains No Methylene Chloride - Clings to Vertical Surfaces
Product description
KBS Strip is a powerful aircraft strength paint remover that sprays as a semi gel coat for fast and easy coverage. KBS Strip produces an even, unbroken film which seals and allows deep penetration through multiple layers of paint. KBS Strip will cling to vertical surfaces with minimal run or sag and offers low-odor technology. KBS Strip is the next generation of Paint Strippers containing no harmful Methylene Chloride. KBS Strip RemovesLead-based paints Polyurethanes Lacquers Shellacs Marine Finishes Tile & Carpet Adhesives Epoxies Latex Stains Varnishes Acrylics Gas Tank Coatings Gas Tank Liners Most Any Finish. KBS Strip AdvantagesGels when Sprayed – Clings to Vertical SurfacesVery Low Odor – Contains Evaporation SealantWill Not Raise Wood Grain or Harm PatinaSafe for All Woods and Metals – Leaves No ResidueStrips the Inside of Gas TanksSurfacesFurniture Woodwork Machinery Masonry Antiques Floors Cars & Boats Graffiti OEM Finishes Cars Bodies & Frames Fuel Tanks Gas Tanks FloorsCoverageThe coverage greatly depends on the age of the coats and the number of coats to be removed. Typically One Gallon of KBS Strip is sufficient for 70-150 square feet. KBS Strip stays wet and active for 2-4 hours. If KBS Strip is left for an extended period and allowed to completely dry, KBS Strip can quickly be reactivated by re-spraying the surface.
- KBS Strip is a powerful, heavy-duty paint, stain & varnish remover developed for use on metal, wood, masonry surfaces and the inside of tanks.
- KBS Strip is a penetrating gel formula that easily clings to vertical surfaces and removes even the toughest finishes and coatings!
- KBS Strip is one of the most aggressive and potent aircraft strippers on the market today!
- KBS Strip features an evaporation sealant which drastically lowers the amount of odor and dramatically increases its stripping power.
- KBS Strip can be easily washed off with water without leaving a residue.
Oxy-Gone Rust Remover and Metal Treatment - just like Ospho - Prepares surfaces for painting-4 gallon case
Quality Chemical
Product description
A balance of phosphoric acid, dichromate, wetting agents and extenders for dissolving rust or preparing rusty metal surfaces for painting. Oxy-gone actually neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting. No sandblasting is necessary! While other treatments can only prepare a clean surface for painting, Oxy-Gone transforms a rusty, scaly surface into an inert paintable surface in just one step. Oxy-Gone is water-based and ready to use. Non-flammable. pH 1.75
- A rust-inhibiting coating is not a paint
- Actually neutralizes existing rust by changing the chemical composition of rust to an inert protective barrier coating to stop future rusting.
- Recommended for use under oil base paint or primer. One gallon of Oxy-Gone covers 600 sq. feet. It dries overnight, makes a lasting bond between rusted metal and paint. (Note: Oxy-Gone is not actually a paint.)
- Use a wire brush or wire wheel to remove loose paint, rust scales, dirt, oil, and anything else accumulated on the surface. After doing this, apply a coat of Oxy-Gone and let it dry (overnight).
- Sometimes, a dry, grayish white powdery film develops. Simply brush off before painting. Oxy-Gone is water-based and ready to use.
User questions & answers
| Question: | Dilution rate |
| Answer: | Pfd’s are not rated by size of vessel but by size of wearer and the intended use. Rating is done by the USCG and are clearly noted on the label. |
Custom Shop Restoration KW901 - Automotive Grease and Wax Remover Surface Prep Cleaner for Before Automobile Painting and All Painting Projects (Gallon)
Product description
KW901 is designed to dissolve and remove surface contaminants commonly found on painted surface such as grease, wax, tar, adhesive residue, tree sap and insect residue. KW901 is a fast acting product to dissolve and loosen contaminants and enable them to be wiped and removed from the surface to be painted. Use before any bodywork or painting operation to assure a clean quality surface. Use with clean lint free wiping cloths, use a separate wet cloth and a separate removal cloth. Change both cloths often during this cleaning procedure.
- KW901 - Grease and Wax Remover is a fast acting and effective product designed to dissolve and loosen surface contaminants commonly found on painted surface such as Grease, Wax,Tar, Adhesive Residue, Tree Sap, Silicones and Insect Residueand enables these contaminants to be easy picked up and removed by wipingaway from the surface to be painted.
- 1 Gallon Can of KW901 - Grease and Wax Remover Surface Prep Cleaner - Use before any bodywork or painting operation to assure a clean quality surface. Promotes maximum paint adhesion. Dries quickly with no residue
- KW901 - Grease and Wax Remover works on painted surfaces, metal, plastic, Epoxy and fiberglass. It's Great for use before and after sanding. Leaves the surface clean and ready for topcoat application
- Use with clean lint free wiping cloths, use a separate wet cloth and a separate removal cloth. Great as an anti-Static, Anti-Silicone panel Wipe before Painting
- Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!
User questions & answers
| Question: | Is this solvent based. Another question said it was oil based but then a review said it was solvent based |
| Answer: | Hi,dear.Every tire cover have elastic strap with hook design can easily makes a snug-fitting installation within seconds. |
| Question: | Does this product remove the clear coat |
| Answer: | So sorry that we didn't do that. but we can provide the way how to measure your tires. 1.Measure The Diameter Of Your Tire, Choose The Right Size. 2. Calculate The Diameter Of Your Tire. 1) Check The Number On Your Tire, Like 205 75 R15. 2) For Example: Tire “205 75 R15“ 205mm=20.5cm=8.07inch (Tire Width) 75=75% (Flat Rate) R15=15inch (The Diameter Of Hub) Tire Diameter=8.07x75%x2+15=27.1inch And you can choose the cover size from 27" to 29". |
| Question: | Can be used after polishing de car? , ready for sealant |
| Answer: | Hope you can provide the specific specifications of your tires and get the fitest wheel covers How to measure your tires: 1.Measure The Diameter Of Your Tire, Choose The Right Size. 2. Calculate The Diameter Of Your Tire. 1) Check The Number On Your Tire, Like 205 75 R15. 2) For Example: Tire “205 75 R15“ 205mm=20.5cm=8.07inch (Tire Width) 75=75% (Flat Rate) R15=15inch (The Diameter Of Hub) Tire Diameter=8.07x75%x2+15=27.1inch And you can choose the cover size from 27" to 29". |
| Question: | Can I use this in California |
| Answer: | /Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Dear friend, yes. if there any problem or dissatisfaction, please email us by contact seller support, no worry, we take full responsibility for our product and we will help on this. |
Custom Shop Restoration KW901 - Automotive Grease and Wax Remover Surface Prep Cleaner for Before Automobile Painting and All Painting Projects (Quart)
Product description
KW901 is designed to dissolve and remove surface contaminants commonly found on painted surface such as grease, wax, tar, adhesive residue, tree sap and insect residue. KW901 is a fast acting product to dissolve and loosen contaminants and enable them to be wiped and removed from the surface to be painted. Use before any bodywork or painting operation to assure a clean quality surface. Use with clean lint free wiping cloths, use a separate wet cloth and a separate removal cloth. Change both cloths often during this cleaning procedure.
- KW901 - Grease and Wax Remover is a fast acting and effective product designed to dissolve and loosen surface contaminants commonly found on painted surface such as Grease, Wax,Tar, Adhesive Residue, Tree Sap, Silicones and Insect Residueand enables these contaminants to be easy picked up and removed by wipingaway from the surface to be painted.
- 1 Quart Can of KW901 - Grease and Wax Remover Surface Prep Cleaner - Use before any bodywork or painting operation to assure a clean quality surface. Promotes maximum paint adhesion. Dries quickly with no residue
- KW901 - Grease and Wax Remover works on painted surfaces, metal, plastic, Epoxy and fiberglass. It's Great for use before and after sanding. Leaves the surface clean and ready for topcoat application
- Use with clean lint free wiping cloths, use a separate wet cloth and a separate removal cloth. Great as an anti-Static, Anti-Silicone panel Wipe before Painting
- Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!
User questions & answers
| Question: | Can I use this in regular 'plastic' spray bottle or will destroy it? Someone said use a 'chemical' spray bottle but i thought they were all they same |
| Answer: | Yes you can, it will help, but not like using a UV product over IT |
| Question: | This work with Glue from paint protection clear bra left over |
| Answer: | I used my electric file for my cuticles, acetone for skin. I did not want to use the acetone on my cuticles because that area of my nails are so dry. |
| Question: | Can I use this to clean off sticker adhesive on my car? Will it damage the finish |
| Answer: | I messed up a nail, I used acetone and my electric nail file. |
| Question: | Is this safe to use on interior services, like plastic trim and dashboards |
| Answer: | Ingredients on powder jar is polyethylmethacrylate, acrylates, copolymer, benzoyl peroxide, PEG-12, dimethicone. I’m pretty sensitive and no affect on my fingers. Hope this helps |
| Question: | Some idiot painted the tile in my shower. It flakes off every time it gets wet. I want to remove the paint in one go and be done with it.Willthiswork |
| Answer: | I use on natural nails with mixed results. If the tear is too big,(0.25 inch or larger) they do not hold well. I usually put them over the area that I had fixed with nail glue to give it extra support. They can last about a week with this method. |
| Question: | what is the grit equivalent, approximately |
| Answer: | Pure acetone on a cotton placed on each nail with aluminum foil wrapped on each nail. Let sit for 10 to 15 minutes. Or soak nails in a glass bowl with pure acetone. Afterwards condition with coconut, almond or olive oil. Jojoba oil works too. |
| Question: | Can this be used safely on vinyl siding? Looking to remove paint and deck stain |
| Answer: | The tape is shiny but it's not a factor. I do my own manicures and they lasts 2 weeks. After cutting cuticles and buffing my nails, I do the following: 1) Apply, cut, and shape the Nail Repair to my nails 2) Apply protective top coat, usually Eccrinal (2 coats) 3) Apply color polish (2 coats) 4) Essie gel setter (2 coats) Hope this helps |
| Question: | What size is each block |
| Answer: | It will make your nails worse. Suggest taking Biotin. It’s good for nails and hair. |
Dumond Chemicals, Inc. 3332 Smart Strip Advanced Paint Remover, 1 Quart
Dumond
Product description
Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.
From the Manufacturer
Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.
- Biodegradable formula
- Safe for user, substrate and environment
- Removes multiple layers
- Odor free water based advanced paint remover
- Formulated without methylene chloride and is non-carcinogenic
- Odor free water based advanced paint remover
- Formulated without methylene chloride and is non-carcinogenic
User questions & answers
| Question: | has anyone use this in a sprayer |
| Answer: | It can be sprayed. Best to use a commercial sprayer. You will need to remove all the filters and use a .031 tip size. |
| Question: | how does it do on wood |
| Answer: | It does very well on wood. Unlike some other environmental strippers like Peel Away 7 it isn't highly alkaline and doesn't require being neutralized, and thus there is no danger of darkening the wood. The #1 choice for wood in my opinion, and I have tried virtually everything. (One tip--cover the stripper with wax paper, plastic, etc. while you let it work so it doesn't dry out. Let it work overnight for maximum effectiveness.) |
| Question: | How many gallons would be needed for a 26 ft boat with a 10 ft beam |
| Answer: | I think you would need to ask to buy it by the barrel! We stripped both sides of a standard door and used over a gallon. There were many layers of paint, but you also have to put it on thickly for it to work properly. I would contact the manufacturer for suggestions on stripping a boat. |
| Question: | does it work on brick which has latex paint on it |
| Answer: | Yes it works great on stripping latex paint from brick interior or exterior. |
Latest Reviews
View all
Mini Crock For Soup
- Updated: 19.06.2023
- Read reviews
Mr Coffee Coffee For French Presses
- Updated: 06.06.2023
- Read reviews
Abdominal Truss For Hernias
- Updated: 22.04.2023
- Read reviews
Car Lubricant
- Updated: 15.06.2023
- Read reviews
Easton Hockey Stick
- Updated: 15.03.2023
- Read reviews