12 best gb voltage testers

Product description

Safety is the number one priority on any job site. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.

From the Manufacturer

Makes quick work out of any electrical project.

• Includes 3-ranges of indication 120-240-480
• Solenoid vibration indicates voltage is present
• Long, 26 in. leads for troubleshooting in electrical panels
• Equipped with neon bulb for DC polarity indication
• Linear, analog scale indicates voltage level

User questions & answers

Question:	Can I use this to test the continuity of my water heater and RV frame
Answer:	This is a voltage tester for automotive, 12 volt systems. It is basically a probe with a light bulb (or LED). You would attach the clip to a ground on the vehicle, like the chassis or frame of the car which is grounded to the ( - ) negative battery terminal.
Question:	What batteries does it use
Answer:	I’m not sure which picture you’re referring to. They do have a continuity tester a 3504, but all the information written on this model in the product ad on Amazon indicates it is for voltage checking only. Just looking at the pictures could be confusing, because they could be someone testing for continuity. Good luck, the continuity tester is about $1 more
Question:	Pardon my ignorance, but the Clíp, serves as a ground? We’re should I connected or clip it too
Answer:	No it doesn't
Question:	Gb gat-3400 automotive circuit tester does not check continuity, so why does a picture of it suggesting that it does
Answer:	Yes. Tool works fine. Have used it many times.

Product description

A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 degree flashing red light) indicators to alert the user of the presence of AC voltage from 50V to 600V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches, and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability. Requires one AAA Battery (not included). Tester is C/ETL/UL Listed, offers a 150lb crush rating, CAT III 600V rating, and includes a 1 year warranty.

From the Manufacturer

Visual and audible indicators signal presence of voltage.

• Use this tester to check for "hot" wires before you begin electrical work
• Beeps and flashes to indicate the presence of AC voltage from 50V to 600V
• Fully insulated probe tip eliminates the risk of contacting live electrical wires
• Built in safe test indicates tester and batteries are working properly
• Compact design with pocket clip for portability

User questions & answers

Question:	Will this show if there’s a current in water
Answer:	This tester only works with AC (alternating current - like from your wall socket supply). If your LEDs use wall socket supply (110 -240 VAC) then the indicator will show when current is flowing or is present in the feed wires. The tester will not work with DC (direct current like the 12 - 24 VDC from batteries or power supply)
Question:	Can the gardner bender gvd-3504 circuit alert non-contact voltage tester be used to trace the path of a hot circuit behind drywall
Answer:	No
Question:	Will it work on led christmas lights
Answer:	The package insert states it has a "45 day money-back guarantee" and a "1-year warranty for quality-related issues."
Question:	Can it be used for automotive
Answer:	Resets to factory default. You lose your program.

Product description

When you're ready to add a multi-meter to your toolbox this unit is an excellent choice. Designed to work on most household appliances and equipped with an easy-to-read 3.5 inch digital display this Gardner Bender multimeter features rubber housing to promote a steadfast comfortable grip. Engineered with four testing functions; AC Voltage to 500V, DC Voltage to 600V, Resistance to 2 meg Ohms and Battery Testing for 1.5 and 9V batteries. The 14 position manual ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is not only drop resistant to 6 ft. and crush rated to 150 lbs. but also features wrap-around lead holders. Snap-in probes are spaced to fit a standard outlet for quick and easy testing. Tight and secure input jacks keep the included 26" test leads fixed firmly in place during testing. Unit comes pre-packaged with leads and operating instructions and includes a 1 year warranty. Tester is rated CAT III 600V and conforms to UL 61010-1 standards and certified to CAN/CSA C22.2. (Requires 9V battery - not included)

From the Manufacturer

Digital multimeters test AC Voltage, DC.

• 14 Position, smooth rotary dial
• Durable, drop resistant housing
• 3 ½ clear digital display
• Tight and secure input jackets
• Tester includes a set of positive and negative electrical test leads

User questions & answers

Question:	does it have magnetic strap
Answer:	The entire black portion of the unit comes off. I used a butter knife and worked it off from the front. Just take your time.
Question:	Only reads 1 when turned on, Ohms and such won’t pick anything up when testing, did anyone else get this? Also all I did was put the battery in
Answer:	No. But the probes clip into the back side of the tool.
Question:	how to get to battery compartment? any video instructions? thank you
Answer:	I think the most definitive answer would be to ask customer service at the sales office; here is the number I found on the Gardner Bender website (800) 624-4320. If you are worried about animals, as a farm boy growing up just watch the animals when they approach the water. They can sense it far faster than us and will back away or not dive in readily. That will tell you something is amiss. Check all electrical connections to make sure they are properly grounded and use only GFCI protection for all outdoors; it will trip at 5 mA to prevent heart stopping current; I designed electrical equipment as a career. If GFCI protected circuits trip and keep tripping hire an electrician to check out the system. Don't take chances; electricity will kill.
Question:	Is there a storage case for this meter
Answer:	Yes and no. Mine could detect a wire behind a wall, it could find a live line under concrete, it could detect live feed through the air, it could even read the magnetic pull in my head. By far the most sensitive non-contact tester ever-not to be trusted. Worst tester ever, there are many testers I’d rather trust my life with that can detect through drywall and then tell which side of a wire is hot.

Product description

Two Piece Safety Kit. Gardner Bender branded electrical tools, voltage testers, wire management products and professional equipment have been a mainstay with electrical contractors.

From the Manufacturer

Two Piece Safety Kit. Gardner Bender branded electrical tools, voltage testers, wire management products and professional equipment have been a mainstay with electrical contractors.

• Non-Contact Voltage Tester senses AC voltage from 50-600V
• Non-Contact Voltage Tester features visual and audible indicator, pocket clip, on-off button
• GFCI Outlet Tester features indicating lamps that indicate 5 common wiring errors
• GFCI Outlet Tester has comfortable contoured design
• Two Piece Safety Kit
• Superior quality at an affordable price
• Gardner Bender branded products and professional equipment have been a mainstay with electrical contractors

User questions & answers

Question:	Does the product bring the two items in the picture
Answer:	Hi, you need to hold the black button down when you are next to the socket. You will get a continuous beep and flash from the unit.
Question:	what batteries do these use
Answer:	I’m going to guess that it is not. Because it is total junk
Question:	How do i turn on the noncontact tester? i get a beep and flashing light when i press the button, but nothing when i put it near a good outlet
Answer:	Yes. It has a strap with a round magnet that works very well to hold it. Of course, one needs a piece of steel nearby to stick it to. I have found the magnet most useful. Of special note is when I accidently left it on the roof of the car when trying to carry too much and open the door at the same time. Although I lost a folder of papers, the multi-tester was still there after 10 miles @ 45mph.
Question:	is this made in USA
Answer:	Should read “1” when turned to ohms. Touch leads together and should read “0.00” or nearly so (depending on how clean your leads are). Should read “000” when initially set to test voltage. Before concluding that your unit is defective, first check that your leads are firmly seated in their ports. If you still get no reading, and you are sure your battery is good, (check user’s guide for indicator icon), then maybe consider your unit is defective?

Product description

The Gardner Bender Voltage Tester is designed for safety and functionality. This tester features 2 large, high-visibility, neon bulbs that indicate the presence of voltage. It has individual indicators for each voltage range to ensure reliable testing. Both the housing and the probes are insulated for increased safety.

From the Manufacturer

High-Visibility Dual Indication Voltage Tester. Tests AC/DC Voltage from 100-300 V. Two large, high-visibility neon bulbs positively indicate the presence of voltage. Individual indicators for each voltage range assure reliability of testing. Probes snap on bottom of housing for easy single-hand testing of outlets.

• Dual-indicating voltage tester tests AC and DC voltage from 100 – 300V
• 2 large, high-visibility, neon bulbs indicate the presence of voltage
• Individual indicators for each voltage range to ensure reliable testing
• Housing and probes are insulated for increased safety
• Probes snap on the bottom of the housing for easy, 1-handed testing

User questions & answers

Question:	Will this work to test circuit breakers
Answer:	Requires one (1) AAA battery

Product description

Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included

• Voltage Tester provides non-contqact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
• Volt Pen with high intensity, bright green LED that indicates the tester is operational and aids in illuminating the workplace
• When voltage is detected, a high intensity, bright red LED illuminates and a warning tone sounds
• Discreet digitally controlled ON/OFF power button
• Auto power-off feature conserves and extends battery life

User questions & answers

Question:	Does this test through the wire insulation
Answer:	Yes. You can tell if it is an energized cord/circuit.
Question:	Why does my tester beep 6 times, flashes red then turns off
Answer:	i never noticed mine beeping and flashing but it alway's shut's down unless you hold the power button down for a few second's.
Question:	Hi what does a slow beep with a red light indicate it's not rapid. Thanks Tom
Answer:	Klein non-contact sensors are known for being misleading, by blinking red and beeping even when there is no electrical current nearby. It does blink red and beep fast (and continuously) at 110v power and is pretty good for that. The slow blinks/beeps, even when touching wood or the edge of a kitchen counter, mean nothing. Some say it's due to very low voltage or 'phantom voltage' but this doesn't always seem to be the case.
Question:	This pen tester make any sounds when it detects power
Answer:	Yes it make a sound and flash red, but make sur than the tester is on green to be sure to test 120 volt because you have two options bleu for low voltage and green for 120 volts!

Product features

Non-Contact Voltage Tester with Low Battery Indicator and Auto Shutdown

Use this Non-Contact Voltage Tester to detect standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. A bright green LED will tell you the tester is working and also functions as a worklight. It changes to red and warning tones sound when voltage is detected.

Product description

Electricity is essential part of life

Electricity is one of the most important blessings that science has given to mankind. It has also become a part of modern life and one cannot think of a world without it. Electricity has many uses in our day to day life. It is used for lighting rooms, working fans and domestic appliances like using electric stoves, A/C and more.

It’s all about precisely troubleshoot, then finding solution is the easy step.

The Weepro Digital Multimeter Vpro850L is a very versatile tester that can measure DC & AC voltage, DC current, resistance, DIODE, transistor hFE and continuity.

Measurement ranges includes:

1.DC Voltage: 200mV/2V/20V/200V +- 0.5%, 600V +- 0.8%

  2. AC Voltage: 200V/600V +- 1.2% 

3. DC Current: 200A/2mA/20mA +- 1%, 200mA +- 1.5%, 10A +- 3%

  4. Resistance: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ +- 0.8%

Specification:

Max Display: LCD3 ½ digits (1999 count) 0.6”

High Polarity: Automatic, indicated minus, assumed plus.

Measure method: double integral A/D switch implement

Fuse Protection: F-200mA/250V. 

Sampling speed: 2 times per second

Over-load indication: “1” is displayed

Polarity Indication: "-" displayed for negative polarity. 

Operating Environment: 0°C~40°C, at <80% RH

Storage Environment: -10°C~50°C, at<85%RH

Power: 9V NEDA 1604 or 6F22

Low battery indication

Static electricity: about 4mA

Product Size: 135 x 67 x 33 mm

Product net weight: 145g (including battery)

Packaging Include:

- 1x Vpro850L Handheld Digital Multimeter 

- 1x Instruction Manual 

- 2x Test Leads (each lead's length: 80cm )

- 1x 9V Battery

• VERSATILE DIGITAL MULTIMETER: Suitable for all kinds of household use and industrial use. Can be use at Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc. It is a AC/DC Voltmeter, Ohm Volt Amp Tester, Electric Ohmmeter, Diode, Resistance and Audible Continuity Detector.
• Troubleshooting with Speed and accuracy: This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
• Electronic Tester Multimeter with Over-load Protection and Low-Power Reminder: Use the PTC protection circuit for Resistance, and frequency measurement. Over-load indication "1" will be displayed; Low battery indication will be displayed when battery power is low.
• Built in Audible Continuity Test Voltmeter and Data Hold : Buzzer will work if the resistance is lower than 30Ω±20Ω; Data Hold Function for clear reading; The Weepro digital multimeter comes with an insulated rubber case kickstand to help better grips and easier reading, and with the ABS material use at the same time provide users maximum safety.
• BUY WITH CONFIDENCE: All sales come with  90-day return refund guarantee, 10-year warranty and lifetime supported by WeePro; Battery / Two 80cm Test Leads / User Manual are Included

User questions & answers

Question:	Hi, Is there a protection plan options for this item? if yes, what's the cost of the plan. Thanks
Answer:	Why bother, the cost is low and there is a return policy.
Question:	is the a category 3 and true RMS meter
Answer:	NO
Question:	Is your meter made here in the usa,or is it out sourced from china
Answer:	Of course in China , as almost tech gadget, it would have costed at least 10 times more if made in USA, and not any better
Question:	Does this work with square waves like those for the output of a 12V landscape lighting transformer? If so, what setting should be used
Answer:	A square wave can be expressed as a sum of the fundamental frequency and many harmonics, the meter is designed to measure just the fundamental , 60 hz, if it can do a proper filtration of it, which is pretty difficult, so NO

Product features

WeePro Vpro850L Digital Multimeter

The multimeter is a basic assistant to test & troubleshoot a variety of automotive and household electrical problems safely and accurately. This WeePro Digital Multimeter Voltmeter Ohmmeter Ammeter meets your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged. Don't hesitate to bring it home now!

INTRODUCTION

• DISPLAY: 3½ digit LCD.
• FUNCTION & RANGE SWITCH

Our CMM adopt rotational switch which situated at the middle of the front case. It is used for the selection of FUNCTION and RANGE .

• POWER ON-OFF

In order to save energy, please turn the switch to "OFF" position when not in use.

PART 2

• "COM" jack -- Common jack.
• " VΩmA" jack -- Voltage, resistance, not more 200mA current, temperature and battery input test jack.
• "10ADC"jack -- For the input of more than 200mA current.

Specifications:

• 1. DC Voltage: 200mV-600V ±(0.5％±2dgts)
• 2. AC Voltage: 200/600V ±(1.2％±10dgts)
• 3. DC Current: 200uA-10A ±(1.0%+2dgts)
• 4. Resistance: 200Ω－2MΩ ±(0.8％±3dgts)
• 5. Power supply: 9V,6F22
• 6. Max. display: 1999
• 7. Diode: Yes; Dynatron: Yes; LCD Backlight: Yes; Continuity Buzzer: Yes; Low Battery Indication:Yes; Data Hold: Yes
• 8. Input Impedance for DCV: 1MΩ
• 9: Sample Rate: 3times/S
• 10: LCD Size: 70 x 40mm

DATA HOLD

The switch is used to hold the display reading when the instrument is disconnected from whatever was being measured.

BACKLIT LCD

Large digital display with backlit LCD for visibility in dimly light areas.When BACK LIGHT is turned on. It needs to be turned off by user manually. (This function was revised according to our lovely customers' suggestion, it is more practical and safer in fact. Thank you all.)

Large LCD Screen

70 x 40mm big lcd screen, word size up to 25mm.The best display visual angle is approx 70°

Product description

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.

From the Manufacturer

The Gardner Bender 16-Range 5-Function Analog Multitester tests AC/DC voltage to 500 volts, DC current to 250 mA, resistance to 1 megohm, and decibels from -20 to +56dB. The multitester is diode protected and includes 2 safety test leads, a helpful instruction manual, and one AA battery. The unit is conveniently pocket-sized, so you can have it with you anytime you need it. Gardner Bender has 50 years of experience making professional electrical tools and supplies of consistently superior quality, so you can count on high-performance products at a fair price.

• N/A
• Imported
• Manual range selection includes a zero ohms adjustment dial
• Easy to read, color-coded displays. Tests DC/AC V, DC current, and resistance
• Includes test lead input icons for correct lead placement and a set of positive and negative electrical test leads
• Agency approved with fuse overload protection circuitry incorporated
• 13 position rotary dial

User questions & answers

Question:	On the gmt-312, the readout shows a battery good/bad scale, but there's no battery test position on the dial. how, on the 312, are batteries tested
Answer:	Yes. My unit is currently on loan to a friend. Not sure what the fuse size is. Per a a previous review for this product I found:It has one .5 Amp 250V 3/4" fuse and a spare fuse holder in the battery compartment.
Question:	Is there alligator clips that fit on the probes
Answer:	Hello, This takes a 1.5v AA battery.
Question:	is it fuse protected
Answer:	If you mean connecting the leads across the terminals of a circuit breaker, then yes, it will.
Question:	What type batteries does this take? Usually the x1 range requures 9v
Answer:	Hello, Yes, this product of GTK-2 comes with both an outlet tester and a non-contact voltage tester as shown in the picture.

Product features

Gardner Bender Multimeters

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests AC voltage, DC voltage, DC current, resistance, continuity and batteries.

Battery Testing

Outlet Testing

Circuit Breaker Testing

Product description

Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The electrical testers below accurately identify and capture circuit continuity and voltage measurements. These testers are ideal for any electrical professional or to have at home.

From the Manufacturer

Non contact sensing circuit.

• VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)
• DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
• QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
• CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
• AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection (VD6504)
• RATED: CAT Rating III 300V, C-UL US (GFI6302), CAT Rating III 1000V, IV 600V, (VD6504) 10 ft Drop and 250 lb Crush (GFI6302 and VD6504)

User questions & answers

Question:	The volt sensor is so sensitive it goes off near an outlet. Is that normal? I thought I could stick it in the slots to find out which side was hot
Answer:	Yes, you can insert the tip of this tool into the slots of an outlet then press the button and it will tell you which side is hot. You can also use it to test the wires in a circuit if you are unsure which is the hot lead. If the wires are connected to the switch, outlet etc touch the tip to the bared wire at the contact point and it will tell you if it is hot. You can also just touch the insulation covering the wires to get a reading too. Try to keep the wires you are testing separted by a few inches if possible, this will help prevent any false reading you might get by voltage seepage from the insulated hot lead. If you didn't know - the hot wire in a circuit is usually black, red or maybe some other dark color, the white is the neutral or return and the green is the ground. Start by testing the dark wire first but as a precaution be sure the check the white also - someone may have wired in incorrectly and that could be a hot lead. I've had - well had, until I left it someplace - one of these for years and it's a good useful tool. So I gotta get another one now, and I'm getting one of these.
Question:	Can this be used as a circuit breaker finder
Answer:	You could use them to find a circuit breaker, if you had someone to watch the tester, while you went through your panel turning off and on your breakers untill you found the one that controlled that circuit. If you didn't want to do that then you will need to buy an circuit breaker finder kit.
Question:	does this tester work on low-voltage landscape lighting wires
Answer:	The non contact voltage tester will.
Question:	can it tell the diffrence between 220v and 110v
Answer:	If you can’t tell the difference 110v and 220v .You Dont Need A Meter.

Product features

Non-Contact Voltage Tester

This unit allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings.

Sperry Instruments GFCI Outlet Tester

When you need a GFCI Outlet tester that's compact, provides comfort for repeated use and tests seven different wiring conditions with a press of a button, reach for the Sperry GFI6302.

• Please press the power button for 2 seconds to switch it on
• ▲Non-Contact & Safe Voltage Tester - Testing can be achieved without physical contact for its NCV Inductive Probe; Insulation operation ensures the safety of testing; In testing AC voltage, it can automatically detect the live wire or null wire; Intelligently identify Electric Field; In the vicinity of the voltage to be tested, the pen will give an alarming sound；Safety Compliance：CAT.III 1000V CAT.IV 600V；CE
• ▲Adjustable Sensitivity & Dual Range Testing - Adjustable sensitivity makes its measurement more sensitive and flexible;The Voltage Tester Pen has the dual testing range, you can adjust the sensitivity according to your needs(12-1000V AC or 48-1000V AC); Automatic Recognition of Voltage Intensity; In using, the NVC sensor of probe can automatically identify the voltage and display it on the LCD screen, simple and clear
• ▲High Definition LCD Screen & Low Battery Indicator - When testing the voltage, the brightness bar on the screen will tell you the voltage intensity; The screen will light up in red or green to distinguish the Live/Null Wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery
• ▲Buzzer Alarm & LED Flashlight - A white LED flashlight with high brightness and low power consumption helps in illuminating the workspace in dark; The lighting lamp and the probe are combined together, convenient for measuring; The buzzer alarm is loud;Triple alarms of sound, light and screen display for testing
• ▲Auto Power Off & Portable Pencil Hook - After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down to extend the battery life and save energy; the convenient portable pencil hook help you to take it out easily; 24-month service

Product features

TACKLIFE -The Latest Dual-Range NCV Tester With High- Definition LCD Display

✓Safety Factor Certification:CAT.III 1000V CAT.IV 600V；CE

- What does CAT level mean to users?

It means a commitment to the personal safety of customers!

Voltage values behind CAT indicate the upper limit of their ability to be subjected to voltage shocks.

- Static electricity on the human body can also cause the response of the tester,because it's sensitive enough to ensure the safety of customers.

✓Adjustable Sensitivity

✓High-definition LCD display

✓Identification of Live/Null Wire

✓Low-battery Indicator

✓Portable Pencil Hook

✓White LED Flashlight - Energy Saving, Convenient

✓High and Low Voltage Signal Indicator

✓Buzzer Alarm - Loud and Sensitive

✓Auto Shutdown

✓Good Sensitivity of NCV Sensor

Live Wire Testing

When the sensor end of the measuring pen is close to the object to be measured, the fast-paced buzzer alarms with its red indicator flashing quickly, and the LCD shows red light, indicating that the tested line is a LIVE WIRE

Null Wire Testing

When the sensor end is close to the object to be measured, the slow-paced buzzer alarms with its red indicator flashing slowly, and the LCD shows green light, indicating that the tested line is a Null Wire

Switching on/off

Tacklife VT02 is an improved version which retains only two buttons, making it EASY to use. - Press the power button for 2 seconds to switch it on, and press the same button once to switch it off.

High-Definition LCD Screen

- When testing the voltage, the brightness bar on the high-definition LCD screen will tell you the voltage intensity; The screen will light up in red/green to distinguish the Live/Null Wire

- High/low sensitivity:When first turned on, the tester is in low sensitivity mode(48-1000V) by default. Press and hold the Sensitivity/LED button until the LED light is turned on, and then press the same button again to make the "S" button light up, the high sensitivity(12-1000V) was chosen.

Safe Non-Contact Voltage Probe

- The electricity can be measured without touching the measured object, which greatly helps your safe use, then indoor wiring and wiring detection is no longer a concern for you.Moreover, the sensitivity of NCV probe is high enough and the response of measuring electricity is very fast.

- Note: Please do not use the tester to test a bulb exists in a closed circuit, because there is no leakage of current nearby, the electric field is very weak, and then the electricity can not be detected.

Bright LED Flashlight

- When the circuit in your house suddenly goes wrong at night and it's dark all around, this pen with a bright LED light installed on the probe will be your most helpful friend at that time. - Under dark conditions, you can press and hold the sensitivity / flashlight button for more than 2 seconds to turn on/turn off the LED Flashlight, and then you can quickly use it to look for the problems in the circuit. LED flashlight saves power and provide convenience.

Portable Pencil Hook

- Convenient and friendly design. For it's weight or overall design, this pen is as easy to carry as a regular pen. The design of the pencil holder enables you to carry the pen anywhere you want. You can take it away directly in your pocket after use, without occupying much space

▲Please install the battery correctly and pay attention to the positive and negative electrodes. Error installation will make the voltage tester pen unable to work normally.

Intelligent Electricity Consumption Reminder

Auto Power Off - After about 3 minutes without any operation or signal detection, the voltage detector will be automatically shut down to save power, which can also extend the battery life;

Low Battery Indicator - It is helpful for you to use the pen safely. When the power of the pen is insufficient, the LCD screen will give relevant prompts to remind you to replace the battery in time, so as to avoid using the pen when the pen has no power.

The Differences Between the Latest NCV Tester VT02 and the Previous VT01

Technical Specifications:

►Dual Range of AC Voltage: 48V-1000V/12V-1000V

►Frequency: 50Hz / 60Hz

►Alarm Mode: Sound & light & Screen alarm

►Electric Torch: LED illumination

►Low-voltage indicator: Yes

►Power Source: 2 x 1.5V AAA Batteries

►Service Temperature: 0-40℃

►Storage Temperature: -10-50℃

►Altitude: <2000m

►Safety Compliance: CAT.III 1000V CAT.IV 600V；CE

Product description

TES-2 120 or 240 VAC Voltage Tester.

• Dual Neon Light Indicates Presence Of Ac Voltage Of Either 120 Or 240 Vic
• Double Insulated Housing and Test Leads
• Pocket Clip

User questions & answers

Question:	So, you just stick it in the 220 outlet and it lets you know if it's hot
Answer:	Yes, I use leads with alligator clips on both ends. This lets me use the device hands-free Good luck!

• ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and more.
• TROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all ranges
• EASE OF USE: Data hold and large digital display with backlit LCD for visibility in dimly light areas; Sampling speed: 2x per second
• 1 Year Warranty. Built-in kickstand for hands-free use. Protective rubber corner guards for drop protection
• NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing

User questions & answers

Question:	which setting is for volts, and which is for ac
Answer:	The V with the two lines is DC volts and the line with the squiggly line is AC volts.
Question:	is the continuity test audible
Answer:	Good question. and I can't find an answer it doesn't say but in the picture when it's showing someone testing continuity it shows that it's beeping what it doesn't say that it does beat and we've got two people on here that say it does not and two people that say that it does so good luck I'm looking for one that is audible myself why all multimeters don't have an audible noise when you have continuity I will never know either that or you can have one that has a paper thin needle that jumps and you can't see it and you have to take your eyes off of what you're working on to see if you have continuity and when you move your head you lose contact and it's such a pain in the ass
Question:	Is this unit protected by a fuse? If so, is it replaceable? My last meter was fused but it was soldered. I couldn't easily replace it
Answer:	I had to replace the ammeter fuse (because I forgot to switch the hot (red) test lead from the left side to the middle, before testing my car's battery voltage). That fuse is 10A 600V. I looked around for those & couldn't find them, but found 10A 250V and these worked OK. They're 20 x 5 mm ( .2 x .79") ceramic fast-blow. https://www.amazon.com/gp/product/B07JFDTTMJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Question:	Can this handle being plugged into a wall socket? Also, can someone give a walkthrough of how to safely test a socket
Answer:	plug the red lead into the meter socket marked COM and the black into the center meter socket. Set the dial to V~ (for AC volts) on the 200 scale (for household current) insert one probe lead into each of the wall socket's vertical slots and move them around a bit inside the outlet slots to make sure you're getting a good connection, if in doubt plug a lamp or something into the socket. If you suspect the outlet socket itself has failed carefully remove the wall plate in order to access the actual wires connected to the outlet to be sure it's either a dead circuit or the outlet itself has failed.

Product features

AstroAI Digital Multimeter

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Dual Fuse

Double Fuse Protection, more secure and reliable; This multimeter is designed with safety in mind. Overload protection on all ranges.

Backlit LCD

Large digital display with backlit LCD for visibility in dimly light areas.

Data Hold

When taking measurements and recording results, it is often easier to use the data hold function to freeze the data being displayed on the digital display.

Low Battery Indication

You can quickly know to replace the battery and continue working. so you never accidentally run out of juice.

Open Support Stand and Protective Rubber

Built-in kickstand for hand free use. Protective rubber corner guards for drop protection.