11 best sheet rock lifts

• 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.drywall lift Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster
• 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift
• 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.Panel Hoist Jack Lifter Jack Rolling Caster drywall lift Panel Lift Panel
• 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoist Jack
• 【quiet working】The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist.Rolling Caster drywall lift Panel Lift Panel Hoist Jack Lifter Jack

User questions & answers

Question:	I need it & i want it but i’m from puerto rico. how we can do
Answer:	No
Question:	How do you lock the cradle into the tilt position? Tilt latch only locks cradle into flat position, not tilted for loading and doing walls
Answer:	It can be locked fully out or just some. But blades as they are fully out it can break easy (that happened to me, i was cutting some cactus and it broke extremely easy). But overall it can be locked at any length you need...
Question:	I need to lifr 2x10 tin sheets to ceiling. Will this handle that
Answer:	No
Question:	What is the height of the lift at the lowest point
Answer:	It fits all standard blades that I've tried

Product description

Our Troy drywall lift is made from an all welded steel construction, tool-free assembly and teardown, single stage winch with brake, and can be used by one person. It has a 11-foot maximum reach for horizontal ceilings and a 15-foot maximum reach for walls (determined by the 11-foot max lift and half the length of drywall). It can hold a 4-by-16-foot single sheet capacity, with a 150 lbs load rating, has 5-inch casters, and weighs 110lbs. MaxTool also backs up this lift with a Two Year Warranty for parts or factory defects.

User questions & answers

Question:	How small of a space can this work in? Can I use it to hang sheet rock on the ceiling in a bathroom over the tub and counter top
Answer:	You can use it without the sensor. The app is going to show an error message about not being able to tell if the door is opened or closed, but it will send the open/close command.
Question:	Does it max out at 11’ even? My ceiling is
Answer:	Yes, the app can manage multiple openers. A separate icon/button is created within the app for each opener. I have done a this myself.
Question:	I have one of these but cannot seem to get it to lift greater than 8 ft, what am i doing wrong
Answer:	It will work if the gate opens based on a momentary-close button. If your opener activates when a button is pressed momentarily, and that button is wired to the actual opener... then this will probably work.
Question:	What makes this superior to the "GypTool 11 ft." sold for $10 less
Answer:	the difference between Version 2 and Version3 of the garage door , V2:220V dc power supply, V3: USB power supply. Other parts of V3 version is slightly upgraded

• 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools.
• 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
• 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism.
• 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.
• 【Quiet working】The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist.

User questions & answers

Question:	How easily is this lift tipped
Answer:	I was installing 4x8 panels that were 5/8 thick fire code. The garage ceiling was 10 1/2 feet high and this panel lift worked great. With the arms opened, the panels extended a foot beyond both sides.
Question:	How much space does the lift take when folded up? Could it be transported in a car trunk
Answer:	Made in China. Very disappointed!!!!

Product features

Maximum Support 150 Pounds

Our drywall lift supports the maximum load of 150 lbs. During the operation, we should pay attention to the weight of the lifted object, and remember not to exceed the maximum load to avoid accidents.

Built-In Winch With Brake

Lifter is easy to assemble and disassemble. The lock device and built-in winch brake are included for increased safety and sturdiness.

Adjustable Telescopic Arm

Telescopic arm can be adjusted from 49' to 114', ideal for installing 4' x 16' sheets.

Product description

specifications:

colour: red

Foldable: yes

Brake: yes

Material: Fully welded steel

Maximum height: 11'

Plate size: 4'x8'

Adjustable height: 4'to 11'

Apply a variety of Drywall panels up to 4ft*16ft

4 inch casters, easy to roll



The drywall lift has the following components, which must be assembled before use:

1. Tripod base assembly

2. Frame components, including winch components and standard telescopic lifting parts

3. Bracket assembly, no detachable cross arm

4. Two cradle cross arm assembly

5. Comes with user manual



Package include:

1 * 11' drywall lift panel hoist

• ? Easy to assemble and disassemble: The drywall lift has a solid structure, and the panel lift can be easily assembled and disassembled without tools. Quick tool-free setup and disassembly storage. The panel hoist can be folded well and has a good weight to strength ratio.
• ? Allow one person to work alone: The drywall lift is perfect for DIY and residential use. The panel lift allows one person to work alone to install drywall walls and ceilings. The panel lifter easy to position and adjust so that it can be placed exactly where I need it.
• ? 150Lbs load capacity: The drywall lifter is made of heavy-duty steel. The panel lifter ensures its long life span. The load capacity of the panel hoist is approximately 150 pounds.
• ? Safety balance: Drywall lift with wheel base. The width of the panel lift is wide enough to stabilize a 12-foot drywall sheet 15 feet above the ground, and is actually a telescopic center that is lifted by a cable/pulley device. Use the 3/16 inch metal aircraft cable of the panel hoist to turn the wheel.
• ? Easy to install and store: You can assemble or disassemble the plasterboard lifter without using any tools. In addition, you can put the drywall hoist in its box (51" x 19.7" x 6.7") to optimize the space when not in use.

Product description

Drywall lift can help you get your job done faster and easier, perfect for commercial or home use. It's sure to do all the heavy and hard work for you. The drywall lift allows one person to lift a drywall panel, without assistance.

Feature:

• Eliminate Risk- Eliminate risk of injury due to the heavy lifting, Prevent strain and injury by letting the lift do all the hard work
• Support Hooks - Secures the drywall on the lift and prevents it from sliding off during placement. Also helps pivot the drywall sheet into place so it is flush against the wall and adds support to prevent the edges of drywall sheets from getting crushed and broken.
• Sturdy - 5' wide tripod base is supported by anti-slip, non-marring casters that won't damage floors; a 3" triangular frame (in 4' sections) features oversized lock nuts and clevis pins at critical pivot-points, and the base includes a flip-down backstop to secure the lift's position for mounting
• Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel support hooks; it retracts to just 36" from the floor when tilted for easy loading
• Lifting Winch - Simple-to-operate, single-stage winch (18" wheel, 4" handle) with an extra-strong, braided-steel lifting cable; it includes a brake and a capped handle to protects hands
• Tool Free Assembly - Easy assemble, no tool required. Quick tool-free setup and disassembly for storage

Specifications:

• Max reach for Horizontal Ceilings: 11-ft /
• Sheet Capacity: up to 4 x 8ft
• Weight Capacity: 150lbs
• Casters Size: 4"
• Max Reach for walls: 15-feet; (11-foot maximum lift and half the length of drywall)

Package Content:

• Drywall Panel Lift
• Manual

• Lifting Winch - Simple-to-operate, single-stage winch (18" wheel, 4" handle) with an extra-strong, braided-steel lifting cable; it includes a brake and a capped handle to protects hands
• Large Cradle - Extends to 10' in width, has rubber caps on 3-position auto-locking outriggers to protect your material, and also features panel support hooks; it retracts to just 36" from the floor when tilted for easy loading
• Versatile - Features a 11' reach for flat ceilings and over 13' reach on walls/angled ceilings; the cradle rotates 360', tilts 65' forward/backward and 10' side-to-side for use on both flat and sloped ceilings
• Contractor Grade - Crafted from extra-duty, all-welded steel, this drywall lift can hoist panels up to 4' x 16' in size, with a maximum load of 150 pounds, and is designed to last a lifetime
• Allows One-Person Working Alone - Drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings. The Panel Hoist easy to position and tweak to get them exactly where I needed them. Panel Lift Panel Hoist Jack Lifter Jack Rolling Caster drywall lift

Product description

Features:



Sturdy welded steel construction with powder coating

Could Lower To 55" Off The Floor For Easy Panel Loading

4" Caster Wheels For Easy Rolling

Hoist tilting for ceilings and walls

Built-in winch with brake

Foot Stops To Keep The Lift In Place For Safety

Easy assembly

Disassemble no tools required

CE standard



Specification:



Color: yellow

Product height: 6’ to 16’(From floor to top)

Material: steel

Foldable: Yes

Brakes: Yes

Apply various Drywall panels up to 4ft*16ft

4" caster wheels for easy rolling

Load capacity: 68kg（150Lbs）

Power source : hand chain



The Drywall lift has following components which must be assembled before use:



Tripod base assembly

Frame assembly, which includes a winch assembly and standard(170cm) telescoping lift sections

Cradle assembly, without its detachable cross arms

Two cradle cross arm assemblies

User's Manual Included

• √ 150LBS 16'-19' Drywall Lift--Heavy duty steel construction, Max Load Capacity: 150 LBS
• √ Hoist Up on Walls/Ceilings--Lifts 16' Ceiling & 19' Wall,Apply various Drywall panels up to 4ftx16ft
• √ Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and disassembly for storage.
• √ Built-in winch with brake--The lock device and built-in winch brake to guarantee safety and sturdiness while working.
• √ CE standard --CE standard lift, build with All welded steel construction. Features 3x4" caster wheels for easy rolling and stop.

User questions & answers

Question:	I need to replace caster wheels on this lift could you give me some information what size
Answer:	Dear Customer, These WORKPRO putty knife can smooth small area of wet cement. If you need to smooth dried cement, we will suggest you use the professional tools. Best regards WORKPRO Customer Service
Question:	Could i lift a 4x8 sheet up through a 23" gap when its at its angeld position
Answer:	Dear Customer, Yes, this putty knife can works on clean a stainless steel BBQ. We will recommend that you pay attention to your safety when using, avoid improper operation. Best Regards WORKPRO Customer Service
Question:	Where can I get the wheels for this lift the bearings went out
Answer:	This putty Knife use 420 (3CR13) stainless steel, the thickness is 1.2mm, and the hardness is about HRC48-52. And these made in China.
Question:	Does it really reach 16 feet
Answer:	The 3" is stiff and others are flexible

• Get Drywall Effortlessly by One Person--This drywall lift allows one person working alone to install full sheets of drywall in a fraction of the time, which is perfect for DIY and residential use
• Adjustable Telescopic Arm--The telescopic arm can be adjusted from 49' to 114', which is ideal for installing 4' x 16' sheets without assistance.
• Safe for Use--This drywall lift is made of heavy-duty steel and built-in winch with brake, which guarantee safety and sturdiness while heavy lifting and placing of drywall sheets
• 150Lbs Load Capacity--This drywall lift can attach to level ceilings, sloped ceilings or side walls with a maximum load of 150 pounds.
• Move Anywhere You Want--Features 3pcs of 5'' caster lockable wheels for easy rolling and stop.

• Durable aluminum alloy construction, complying with somatology and motion feature, lightweight but sturdy for easy mobility
• Adjustable from 36" (91cm) to 50" (127cm) to accommodate different working heights; Load Capacity: 225 lbs (102 kg)
• Dual action springs provide increased flexibility; Exclusive wing bolt design for adjusting versatile height without help of tools; Lock nuts installed at all crucial pivots and connecting points for greater reliability
• 3-position heel bracket accommodating different foot sizes and preventing slippage in every direction; Adjustable leg straps with metal buckle and heel plates bring more safety; Skid-proof rubber soles help stable movement and protect floor from scratches
• Great for drywall, painting, electrical, drop ceilings and more; Also used for parades or cosplay assistants

Product features

Drywall Stilts 36" to 50" Blue Professional Painting Painter Tool

• Material: aluminum alloy
• Overall Dimension (LxWxH): 10 13/16" x 4 1/8" x 44 1/2" (27.5 x 10.5 x 113 cm)
• Adjustable Height: 36" to 50" (91cm to 127cm)
• Load Capacity: 225 lbs (102 kg)
• Weight: 15.4 lbs (7 kg)

Package Contents:

• 1x Drywall Stilt
• 1x Manual

Dual action springs provide increased flexibility

3-position heel bracket accommodating different foot sizes and preventing slippage in every direction

Adjustable leg straps with metal buckle and heel plates bring more safety

Adjustable from 36" to 50" to accommodate different working heights

Product description

Product Description: The Telpro Panellift drywall lifter can be assembled or disassembled in seconds with no tools required. A tilting cradle brings the loading height down to a manageable 34 inches for easy installation of drywall to walls and to sloped or level ceilings up to 11-Feet tall. A maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets. The integral cradle outriggers extend to handle up to 4-by-16-foot sheets. Easy-rolling five-inch casters mean smooth transport over rough floors. And a fast-action, single-stage winch with a silent cam-lock brake offers total control over raising and lowering operations. The lift consists of three components and, when collapsed, fits into the trunk of a car. Weighing just 100 pounds, the Panellift offers plenty of support without the backbreaking haul to and from the rig.

From the Manufacturer

Product Description: The Telpro Panellift drywall lifter can be assembled or disassembled in seconds with no tools required. A tilting cradle brings the loading height down to a manageable 34 inches for easy installation of drywall to walls and to sloped or level ceilings up to 11-Feet tall. A maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets. The integral cradle outriggers extend to handle up to 4-by-16-foot sheets. Easy-rolling five-inch casters mean smooth transport over rough floors. And a fast-action, single-stage winch with a silent cam-lock brake offers total control over raising and lowering operations. The lift consists of three components and, when collapsed, fits into the trunk of a car. Weighing just 100 pounds, the Panellift offers plenty of support without the backbreaking haul to and from the rig.

• Drywall lift can be assembled or disassembled in seconds with not tools required
• Tilting cradle brings loading height down to 34 inches for easy installation of drywall to walls. sloped or level ceilings up to 11-Feet tall
• Integral cradle outriggers extend to handle up to 4-by-16-foot sheets
• Disassembled unit fits into car trunk
• Maximum load rating of 150 pounds ensures plenty of support for lifting all standard drywall sheets

User questions & answers

Question:	Does extension come with it
Answer:	ORDER IT FROM AMAZON & GET IT SHIPPED THERE
Question:	Does the cradle lock in the horizontal position
Answer:	You can't lock in tilt. Tilt is for loading and setting panel on wall.
Question:	Does the panel cradle lock in the horizontal position
Answer:	Yes, I lifted 3x13’ tin sheets in a 50x50 shop, I used 2x10s on top of lift for support for the metal panels. Did the whole ceiling by myself
Question:	Being an amateur, and not a contractor, could someone please tell why this one is better then some of the ones half the price
Answer:	I'd say the approximate height when the lift is at the lowest setting is about 4'6" to 5'. But, if you tilt the panel hooks, it would be lower on one side. (As it is in the picture). Makes it easier to load.
Question:	I need it & i want it but i’m from puerto rico. how we can do
Answer:	If the clear floor space is under 4'x4', it would be really tough because of maneuverability with the tripod legs. In tight places, it's hard to replace the old "T-braces" to hold up the sheet rock (made of braced 2'x4's - looks like a small version of the old telephone poles). That's usually a two-person job.
Question:	How do you lock the cradle into the tilt position? Tilt latch only locks cradle into flat position, not tilted for loading and doing walls
Answer:	At 11 feet the host will start to weaken. You will need to purchase the to extension to make it safe.
Question:	I need to lifr 2x10 tin sheets to ceiling. Will this handle that
Answer:	It should lift horizontally to 9’ and when the sheet is flipped vertically the top edge should reach 12’
Question:	What is the height of the lift at the lowest point
Answer:	That one is currently unavailable. The Troy is a well made lift, did the job well. They all have some quirks but make the job much easier.

Product features

Unmatched Quality Since 1973

After 40 years, it’s still the best built, easiest to operate, longest lasting cable drive lift available. We’re not kidding when we say, 'beware of imitations.' Telpro Inc.’s design concepts make the PANEL-LIFT brand drywall lift the clear choice if you’re not into buying disposable equipment.

Product description

Features:



One Person Operation

Load Capacity: 150 Lbs

Sturdy welded steel construction with powder coating

Foot stops to keep the lift in place for safety

Disassemble no tools required

Sturdy welded steel

Hoist tilting for ceilings and walls

Built-in winch with brake

CE Standard

Easy to assemble

Could lower to 34" off the floor for easy panel loading

Perfect For Both Home & Commercial Use



Specification:



Color: Red

Foldable: Yes√

Brakes: Yes √

Material: All welded Steel

Power source : hand chain

Max Height: 11'

Plate size : 4'x8'

Adjustable height: 4'to 11'

Apply various Drywall panels up to 4ft*16ft

4" caster wheels for easy rolling

Load capacity: 150lbs



The Drywall lift has following components which must be assembled before use:



1.Tripod base assembly

2.Frame assembly, which includes a winch assembly and standard telescoping lift sections

3.Cradle assembly, without its detachable cross arms

4.Two cradle cross arm assemblies

5.User's Manual Included

• √ 150LBS 11' Drywall Lift--Heavy duty steel construction, Max Load Capacity: 150 LBS
• √ Hoist Up on Walls/Ceilings--Lifts 11' horizontal Ceiling & Max.15'Wall,Apply various Drywall panels up to 4ftx8ft
• √ Tool free assembly--Easy assemble, no tool required. Quick tool-free setup and dis-assembly for storage.
• √ Built-in winch with brake--The lock device and built-in winch brake to guarantee safety and sturdiness while working.
• √ CE standard --CE standard lift, build with All welded steel construction. Features 3x4" caster wheels for easy rolling and stop.

User questions & answers

Question:	Can you used 4x
Answer:	There is end cap on the end, where the biggest socket is,,, you have to pull that end cap out and all socket come out....
Question:	does the yellow extension fit this red lift
Answer:	not sure however I do know that we had a extremely hard time to get it to line up and work correctly we had to purchase a new clipper set that worked great. had to much hassle with this item would not purchase again
Question:	I need to get a part. One of the coaster broke i need to replace it how do i replace it
Answer:	I had the same problem so I looked to see if they matched the blades already on mine and they looked the same. When I got them they fit perfect. Hope this helps.
Question:	How long if l need Next day ship how quick
Answer:	No. The Wahl 1045 is a "People Blade". You have a pet clipper so you need a "Pet Blade". A Pet Blade is usually stamped with a number on the blade itself like 50, 40, 30, 15, 7F, etc. and each number is designed for a certain fur thickness so you don't want to force a thin hair-blade on a thick-hair pet which will hurt the pet. I couldn't find the PCMC-2 model on Wahl.com so either give them a call or even take your clipper to Petco/Petsmart or other pet store because those pet stores sell clippers and may have a compatible replacement blade for you. I have a Human-Clipper and tried using it to cut a piece of matted fur off my long hair Ragdoll but it failed miserably. My Wahl 1045 replacement blade is 4 years old and works like a champ on my Human Hair. Andis is a great pet clipper that uses ceramic blades instead of metal so they won't accidentally burn your pet when they heat up during use. I would consider something like that for your furry buddy who will love you for it.

Product description

WE PROMISE

 ✈ Delivery Time: 3-5 days

☎ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.

☎ We guarantee you will love this drywall lift pane. But if you’re not satisfied with this heavy duty lift drywall panel, please get in touch with us.

☎ We have a well trained customers sevice team, which could reply you in short time and give you help, aim to give a better shopping experience to our customers. Please rest assured to buy!

Product Feature

✔️Drywall and our products are fixed together by a strong support hook, which avoids the danger of drywall sliding in the process of rising.

✔️When using the drywall lift, you need to put down the rubber foot rear baffle at the bottom, make it fully contact with the ground, generate enough friction to ensure that the whole product will not move during the operation.

✔️The single-stage winch with handle and brake rod makes lifting drywall easier. By pressing down the brake rod, the product can be fixed to a certain height.

✔️The Universal wheel with brake can fix drywall lift in a certain position in use, avoid the front and back shaking of the product, and it will be better to use with the rear baffle of rubber foot.

✔️The arm length of the product can be adjusted by the telescopic knob to ensure that the product is suitable for drywall of various sizes.

• 🧰【Super simple assembly and disassembly】is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio.
• 🧰【Can be operated by one person】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them.
• 🧰【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs.Lifter Jack Rolling Caster drywall lift Panel Lift Panel Hoist Jack
• 🧰【Give you absolute safety】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist.
• 🧰【High-Quality After-Sales Service】 All of our items ship out from our different warehouses including GA, LA ,FL,etc.Only to deliver items to customers as quickly as possible.We guarantee that you will like our office chair, no matter if you have any questions, please feel free to contact our customer service team